Alçak şasi dorse

LANGENDORF 3 Achs Tieflader für Stapler Baum. LKW 7400 m/m

Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease Cedpfx Aoh Hm Thsldsrb - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Koşul: ikinci el, kilometre: 360.000 km, güç: 390 kW (530,25 bg), ilk tescil: 05/2020, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, frenler: retarder, renk: mavi, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, vinç, DAF XF 530 6X2 Lift/direksiyonlu, tamamen havalı süspansiyonlu, platform kasalı vinçli Tam donanımlı Dingil mesafesi: 4800 mm Yükleme alanı: 6200 mm Toplam uzunluk: 9900 mm Vinç: Palfinger PK 23002-SH Sonsuz döner 6+1, toplam 19 m, 740 kg, uzaktan kumanda, hızlı bağlantılı hortum paketi, palet çatallı (1100 saat) Durum: Üst seviyede ve tam donanımlı Crodpfox Sbz Tjx Aldjb Römork da mevcut, şu anda iki seçenek: Jumbo veya Standart

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, BERTOJA SEMI-TRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Raised edge on gooseneck Winch pre-equipment Self-steering axle CONTACTS: 0823 1686306 335 6713062 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder-770s – Limited Edition – 660 S Semitrailer – Refrigerated Tanker Semi-Trailer – Lamberet – Schmitz – Isuzu – Fixed Flatbed – Crane – Tipper – 4 Axles – Rear Four Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Trilateral – V8 – Scania – Frost Edition Curtain Side – Box – Tail-lift Box – Refrigerated Cell – Insulated with Fridge – Van Codpfx Aexpi A Roldjrb Domenico Truck srl declines all responsibility for any discrepancies regarding equipment, optional extras, and vehicle features, which may in some cases differ from those stated in the description. We invite you to verify the specifications of each specific vehicle.

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, renk: mavi, Üretim yılı: 2019, Donanım: ABS, = Additional Options and Accessories = - Lifting axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lift axle; Steering Technical condition: Very good Visual condition: Very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOWBED 3X SAF HYDRAULICALLY STEERED AXLES LAST AXLE IS LIFTABLE RADIO REMOTE CONTROL AIR SUSPENDED TYRE SIZE 245/70/R17.5 GOOSENECK LENGTH 308 CM EXTENDABLE LOADING PLATFORM LOADING PLATFORM LENGTH 678 CM + 300 CM EXTENDABLE; TOTAL PLATFORM LENGTH 978 CM PLATFORM WIDTH 254 CM LOADING FLOOR HEIGHT ± 89 CM LENGTH FROM KINGPIN TO END OF LOWBED 927 CM TOTAL LENGTH 987 CM 4X HYDRAULIC SUPPORT LEGS LASHING EYES FOR ROPES PREPARED FOR TWISTLOCKS FOR 20 FT CONTAINER FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINES FOR SALE. Credpfxeuxxc Te Aldsb WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Koşul: ikinci el, Üretim yılı: 2014, çalışma saatleri: 4.097 h, Donanım: her tahrikli, KUBOTA KX 121-33 Alpha Mini Ekskavatör Model: KX121-33 ALPHA Seri Numarası: 77397 Ürün Kimlik Numarası: WKFRGU400Z077397 Renk: KIRMIZI + Kazıcı kepçesi Ağırlık: 3,9 t Taşıma uzunluğu: 5,06 m Taşıma genişliği: 1,7 m Taşıma yüksekliği: 2,49 m Kazıcı kepçe hacmi: 0,12 m³ Kepçe genişliği: 0,6 m Crjdexafg Hjpfx Aldsb Palet genişliği: 350 mm Erişim mesafesi: 5,6 m Kazı derinliği: 3,51 m Koparma kuvveti: 32,5 kN Motor gücü: 29,4 kW Silindir hacmi: 2,2 l Maksimum torkta devir: 2250 devir/dakika Finansman/Leasing konusunda da iş ortaklarımızla sizi memnuniyetle destekleriz. Tüm bilgiler taahhütsüzdür. Hata ve ara satış hakkı saklıdır.

Koşul: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: Codpfx Aljhlz S Njdorb • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.

Koşul: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm Crjdpfxeiu Er Ao Aldsb - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Koşul: yeni, kilometre: 100 km, güç: 324 kW (440,52 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.050 mm, Üretim yılı: 2025, Donanım: ABS, is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, Brand new MAN 26.440 TGX 6x2-4 LL as construction machinery and aerial platform transporter. Truck Equipment: - Long-distance driver's cab - Auxiliary heating - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED taillights - Euro 6e - Automatic transmission - Sun visor - Beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator Crsdpfx Alexqkayjdob - Media system navigation - Flatbed - 100 km - 324 kW (441 hp) - Internal combustion engine - Diesel, automatic - Euro 6e - 4 (green) - 26,000 kg - Automatic climate control - White - long distance - etc. Body: - Body manufactured from laser-cut and folded special profiles in low bed design - Body length approx.: 8,850 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 track ramps, each ramp with 1 fixed section and 1 extendable section, ramps are laterally adjustable - Ramp surface made from grating floor - Mechanical ramp locking including holders on outer frame when not in use (optionally with strap securing) - Ramp drive via electro-hydraulic power unit incl. emergency controls at control block and hand pump in case of total failure - Hydraulic rear supports - Wireless remote control for all hydraulic functions - Heavy-duty grating floor - Rear incl. tapering - Bulkhead approx. 2,000 mm high, with inward-folded profiles - Stainless steel toolbox inside in front of bulkhead - 2 stainless steel toolboxes at the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at the rear right (for hydraulic power unit and control block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at the rear - 2 access steps for loading area access Load securing: - Longitudinal beams with Multi-X contour and 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the longitudinal beams - Outer frame perforated design with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points below, in front of the front bulkhead toolbox Paintwork: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted RAL 9005 black - Ramps and grating floors hot-dip galvanized Decals: - Reflective tape on sides and rear according to EC regulations. Further information on request.

Koşul: ikinci el, boş ağırlık: 11.300 kg, azami yük ağırlığı: 29.700 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, süspansiyon: hava, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German semi-trailer * Special low-bed trailer for transporting commercial vehicles and construction machinery * Manufactured by Estepe, a premium manufacturer from the Netherlands (Estepe type E0PL 24-41) * Years of experience in constructing special low-bed trailers for transporting trucks and construction equipment ensure attention to every detail * Naturally equipped with extendable low-bed, hydraulic ramps, and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with raise/lower function * Central lubrication system * Gross vehicle weight (GVW): 41,000 kg * Unladen weight: 11,300 kg * Payload: 29,700 kg If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer has an accurate understanding of the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or inaccuracies in this offer. The buyer is responsible for independently verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. Codpfertbb Sex Aldjrb - .

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, Donanım: hidrolik arka platform, DE ANGELIS 3S425 semi-trailer, maximum mass 42,500 kg, 13 tyres, size 245/70R17.5''. Vehicle equipped with: - Hydraulic loading ramps, 4.00m x 0.85m, wood covered (fixed position) - Electro-hydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd self-steering axle - Lashing ring kit - 200 mm high aluminium sideboards on the gooseneck POSSIBILITY OF FINANCING OR CUSTOM LEASING AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS IN OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: Crsdpfxjydcyyj Aldob MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz - Isuzu - Fixed flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Curtain Sider - Box - Boarding platform - Refrigerated Cell - Insulated with fridge - Van Domenico Truck srl declines any responsibility for technical data, optional equipment, and characteristics that may differ from those stated in the description. We kindly ask you to check the specifications of the specific vehicle.