Alçak yükleyici yarı römork

Meusburger 3-Achs-Tele-Semi 1P. Radmul.-Federhebew.

Durumu: kullanılmış, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2013, bir sonraki muayene (TÜV): 01/2025, yükleme alanı uzunluğu: 19.100 mm, Donanım: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF Year of manufacture: 2023 Tedpfx Aeu Ry T Refnsf Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max: 11,200 kg + 11,200 kg + 11,200 kg Kingpin/Support load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyre size: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further details available on request by email. All information provided without guarantee; errors excepted! Online descriptions are non-binding and do not constitute warranted characteristics. The seller accepts no liability for mistakes, input errors, or data transmission errors. Subject to change without notice. Ongoing purchasing and sales as well as trade-in and rental of crane and lifting vehicles as well as construction machinery and heavy-duty vehicles.

Durumu: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment Tsdpfxsiu Er Aj Afnsf - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durumu: yeni, azami yük ağırlığı: 45.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 300 mm, Üretim yılı: 2025, Donanım: ABS, * DOLL panther yürüyen aksamı + 5 yıl garanti * DOLL tronic kumanda ve kontrol sistemi dâhil kablosuz uzaktan kumanda * Hidrolik olarak ayrılabilir kuğu boynu * Dışta ana şasi * Hidrolik direksiyon * Kapsamlı yük emniyet paketi * Alçak platform uzunluğu: 13.000 mm (7.500 mm + 5.500 mm) Tjdpfx Aegqc E Esfnsf * İsteğe bağlı kapsamlı ekipman Resimler orijinalinden farklılık gösterebilir. Bilgiler garanti verilmeden sunulmuştur.

Durumu: yeni, azami yük ağırlığı: 36.410 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment. Complete equipment list available upon request. Gooseneck * Gooseneck in SNT design for optimized load floor length, approx. 3,700 mm length * Rear bevel approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electric-hydraulic power unit for controlling hydraulic functions (except for hydraulic winches) * Outer beams on the gooseneck with mounting holes for bolted lashing rings Todsxc Axrepfx Afnsf * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat-mounted lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood flooring over the gooseneck * 2-inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stake pockets recessed into the gooseneck for plug-in stakes approx. 100 x 50 mm (inside on chassis beam) Loading platform * Extendable loading platform, approx. 8,800 mm in length with rear bevel approx. 500 mm x 10° * Recess in the platform and extending into the bevel for accommodating the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood floor approx. 50 mm thick on the platform, interrupted between the axles * 1 intermediate table, approx. 300 mm wide, for the large cross-section extension tube * Platform locking with conically welded locking profiles at approx. 250 mm intervals * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, fold-out lashing rings in the external frame of the platform (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between the 1st and 2nd axles * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also usable as widening boards * Hardwood covering on the platform's bevel * Painted sand coating on the platform's outer frame and on the platform's tread plates Chassis * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle steered with trailing arm * 3rd axle with electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with starting aid * 2 axle-load gauges mounted on the left side including axle-load diagram Tires * 235/75 R 17.5 3PMSF twin tires * TPMS tire pressure monitoring system per ECE R 141 Paintwork * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M: one pair of two-piece steel ramps approx. 4,350 mm long and 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Each ramp can be hydraulically moved approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform's bevel * Ramp with hardwood covering Brake system WABCO EBS-E in accordance with EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Durumu: kullanılmış, azami yük ağırlığı: 37.575 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2022, bir sonraki muayene (TÜV): 10/2025, toplam genişlik: 2.540 mm, Donanım: ABS, More vehicles available at Excerpt from the equipment. Full specifications on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Load Area: - Telescopic load area with rear chamfer approx. 1,000 mm x 8° Tsdpfoxfx R Aox Afnef - Between the 1st and 2nd axles, one pair of fixed wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) - 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) - 4 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching lashing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t per piece Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle with trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools Tyres: - Tyres 235/75 R 17.5 Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Braking System: - Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Paintwork: - HRM Metallization (High Resistance Metallisation), complete steel structure shot-blasted to SA2.5-SA3. Then hot refined with ZINACOR 850 (zinc 85% - aluminium 15%) - High-quality 2-component (2K) top coat, single color RAL 3002 carmine red Accessories Included: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Galvanized, extendable side extensions approx. 230 mm per side - Galvanized folding supports underneath the chamfered load area - Bracket for a rotating beacon at the rear of the trailer - Plug-in aluminum side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H), rear galvanized stanchions removable (body length approx. 2,560 mm) - 1 galvanized toolbox integrated into the chamfered gooseneck - Hardwood rear bumper between gooseneck and load area - 3 pairs of WADER container locks in the load area for 20' (30') or 40' containers - 5 pairs of sockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the load area - Hardwood extension planks, max. load on an area of approx. 200 x 200 mm up to approx. 3.5 t - Galvanized holders for extension planks left and right under the load area - Non-skid sand coating painted on checker plate over the king pin and load area - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck, 2 pairs at the rear - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load pressure gauge to monitor axle loads, including load chart - 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high - Storage for max. 7 pairs of plug-in stanchions approx. 100 x 50 mm on the front wall - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with hardwood beamed approx. 48 mm thick, incl. electro-hydraulic unit. Ramp with hydraulic folding ramp sections. Hydraulic lifting mechanism and hydraulically adjustable, maximum load ...

Durumu: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 37.400 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Güçlendirilmiş versiyon, havalı süspansiyonlu ve kaldırılabilir dingil, dingil yük göstergesi, yüksek yatak uzunluğu yaklaşık 3.500 mm, alçak yatak uzunluğu yaklaşık 8.800 mm, yükseklik yaklaşık 900 mm, 2 ve 3 dingilli çekiciler için uygun, ön duvar yaklaşık 800 mm yüksekliğinde, dış çerçevede 16 adet kazık yuvası, 32 adet bağlantı halkası, rampa yaklaşık 4.200 mm uzunluğunda (2 parçalı), rampaların hidrolik kaydırılması, kuğu boynunda rampalar üzerinden geçiş için, -- baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller --, Daha fazla bilgi: !, More Details: ! Tsdpexnpgyjfx Afnef

Durumu: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Tsdowu A Slopfx Afnjf Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Durumu: kullanılmış, boş ağırlık: 10.220 kg, azami yük ağırlığı: 39.280 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.150 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2024, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Gooseneck at the rear with straight design - 3 pairs of lashing rings Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850x970x400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widened lower section - Between 1st and 2nd axles, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Includes 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t each - 1 pair of flat-mounted lashing rings at the front of the loading area - 5 pairs of fold-out lashing rings - 2 pairs of fold-out lashing rings - Cutouts in outer frame of the loading area for securing straps - Hardwood flooring on rear bevel approx. 48 mm thick, checker plate covering over the axles Axles and tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres: 235/75 R 17.5 3PMSF Included accessories: - One galvanized steel front wall, approx. 1,200 mm high - 2" king pin - Yellow and red air couplings on the galvanized connection strip at the front - 2 wheel chocks with holders mounted on the front wall Tjdexwxtbjpfx Afnjf - Galvanized, extendable side extensions, approx. 230 mm per side - Galvanized folding supports under the rear loading area bevel - Bracket for rotary beacon at the rear of the trailer - Sliding hanging rail for ALU approach ramps at the rear of the vehicle - Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer - On gooseneck and rear panel, each left and right: mount for warning signs incl. socket - One mud flap on the rear of the trailer - European reflector plates at the rear of the trailer - Operating manual and description on USB stick - On the gooseneck, plug-in ALU side and rear panels approx. 2,440 x 400 mm - Rear galvanized drop-in stanchions are removable - 3 pairs of WADER container pockets in the loading area for one 20ft or one 40ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair of WADER container pockets - 1 pair of recessed lashing rings along the center beam at the rear, in the bevel - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, each with position light - On the warning signs a bracket for a rotary beacon - Load gauge for determining axle loads, incl. load diagram

Durumu: yeni, toplam ağırlık: 43.500 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, Donanım: ABS, GVN 4GVN O4 OVERWIDTH FLATBED KOC LIFT HYDRAULIC RAMP ----VEHICLE HISTORY * NEW VEHICLE 09/2025 * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT EQUIPMENT AND BODY * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FRONT STORAGE COMPARTMENT UNDER NECK * TOOLBOX BOTH SIDES * FIRE EXTINGUISHER HOLDER * LOAD AREA ON THE NECK * EXTENDABLE PANEL FOR OVERWIDTH LOADS * OVERWIDTH SILL * OVERWIDTH WARNING SIGN 4X * LASHING POINTS * ADDITIONAL SUPPORTS * FIXED HYDRAULIC FOLDING RAMPS * ELECTRIC CONNECTION FOR HYDRAULICS OF FOLDING RAMPS * TRAILER LIGHT SYSTEMS * PRESSURE GAUGE ----CHASSIS AND AXLES * OSMAN KOC AXLES SAME SPEC AS BPW AXLES * 4 AXLES * LIFT AXLE 1ST AXLE * STEERABLE/LATCHING LAST AXLE * FULL AIR SUSPENSION * DRUM BRAKES * WABCO BRAKE SYSTEM ----TYRES * ALL TYRES * 235/75 R17.5 ----DIMENSIONS * CARGO AREA DIMENSIONS * 9.55 M L x 2.55 M W (3 M W FOR OVERWIDTH) * LENGTH OF RAMPS * 3.23 M L x 0.75 M W * CARGO DIMENSIONS ABOVE NECK * 1.8 M L x 2.4 M W * NECK HEIGHT FROM GROUND * 1.4 M H * LOAD AREA HEIGHT FROM GROUND * 0.9 M H * OVERALL LENGTH WITHOUT RAMPS * 13.6 M L ----IMMEDIATELY READY FOR USE ---- * EXPORT SALE ONLY WITH A DEPOSIT (MIN. €500 - €2000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 Todpfx Aoxpzr Dsfnsf ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS PLATES, AND 17-21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 is required. (For sales to the EU and third countries a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to changes, errors, and prior sale! You can find more vehicles on our website: Sale is subject exclusively to our general terms and conditions – see website Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Sometimes these are caused by transfer errors in the systems of different platform providers. We therefore point out that all information is provided without warranty and does not constitute a legal claim. Legal: This sales listing does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for initiating a contract. The information given here is without warranty and does not represent guaranteed properties.