Düşük yükleyici

Nooteboom Semidieplader + Hydraulisch Rampen

Durumu: kullanılmış, azami yük ağırlığı: 36.216 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, FAYMONVILLE MAX100 3-axle SANH semi low-loader forklift transport trailer First registration: 10/2024 Unladen weight approx. 13,200 kg Gisdpfx Ahsx Nlhrj Djn Fifth wheel height: 1,150 mm Low-bed length: 9,300 mm Gooseneck length: 3,800 mm Internal width: 2,480 mm Load height in the low-bed: 860 mm Height-adjustable tarpaulin superstructure, adjustable by approx. 400 mm EDSCHA sliding roof, movable forward The structure can be hydraulically widened at the rear portal by approx. 750 mm Loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm; gooseneck and low-bed with grating flooring, over the axles: checker plate flooring with integrated sand coating Two-part steel ramps, approx. 3,185 + 1,420 mm, width 1,250 mm each, also with grating surface, max. load capacity 30,000 kg Tyres: 13 x 235/75 R 17.5 BPW axles with drum brakes 1st axle: LIFT AXLE 3rd axle: STEERABLE TRAILING AXLE Air suspension with raising/lowering function WABCO trailer EBS 24-volt E-hydraulics RENTING is the new BUYING – immediately available from us with full-service rental as well.

Durumu: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips Godpouadk Nofx Ah Dein - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Durumu: iyi (kullanılmış), kilometre: 342.344 km, güç: 257 kW (349,42 bg), ilk tescil: 11/2006, yakıt türü: dizel, lastik boyutu: 385/65 R22,5, dingil konfigürasyonu: 6x4, dingil mesafesi: 5.580 mm, yakıt: dizel, frenler: motor freni, renk: diğer, şoför kabini: gündüz kabini, vites türü: otomatik, vites sayısı: 12, emisyon sınıfı: Euro 3, süspansiyon: çelik, koltuk sayısı: 2, Üretim yılı: 2006, Donanım: ABS, elektrikli cam sistemi, tır çekici bağlantısı, vinç, = Additional Options and Equipment = - 3 axles - 6x4 drive - Leaf spring suspension - Speed limiter - Hydraulic system - Hub reduction - Radio - Beacon light - Feed pipe (possibly "chute" or "feed tube" depending on context) - Differential lock - PTO (power take-off) = Remarks = Crane Number of hydraulic extensions: 2 Number of outriggers: 2 Number of auxiliary functions: 2 = Further Information = General Information Number of doors: 2 Cab type: TRAKKER, single cab Registration number: 1PKG353 Technical Information Number of cylinders: 6 Engine displacement: 7,790 cc Drivetrain Engine type: IVECO CURSOR 8 Axle Configuration Front axle: Tire size: 385/65 R22.5; Max. axle load: 8,000 kg; Steering Rear axle 1: Tire size: 315/80 R22.5; Dual tires; Max. axle load: 10,000 kg Rear axle 2: Tire size: 315/80 R22.5; Dual tires; Max. axle load: 10,000 kg Weights Unladen weight: 12,280 kg Payload: 13,720 kg Gross vehicle weight: 26,000 kg Maximum towing capacity: 44,000 kg Functional Crane: Fassi F120.22, year of manufacture: 1999 Body manufacturer: HYVALIFT Extendable body: Yes Condition Giedpfx Ahsw I Ha So Den Technical condition: Good Visual condition: Good

Durumu: kullanılmış, boş ağırlık: 22.300 kg, kaldırma yüksekliği: 26.600 mm, direk tipi: simpleks, Üretim yılı: 2025, çalışma saatleri: 16 h, toplam uzunluk: 8.250 mm, toplam genişlik: 2.530 mm, toplam yükseklik: 3.120 mm, ön lastik ölçüsü: 445/65 R22,5, arka lastik boyutu: 445/65 R22,5, yük merkezi: 600 mm, çatalların uzunluğu: 1.200 mm, fork taşıyıcı genişliği: 1.040 mm, yakıt: dizel, yük kapasitesi: 8.000 kg, makine/araç numarası: FANL1086303, - Vehicle: Single auxiliary hydraulics - Mast: Single auxiliary hydraulics - Fork carriage: Fork carriage with forks (FEM) - Fully enclosed cab, left door split - Overall height with operator protection canopy: 3120 mm - Heating & air conditioning - Integrated particulate filter with AdBlue - 2 x front work lights - 1 x rear reversing light - Lighting system with parking and driving lights, brake lights and indicators, compliant with German Road Traffic Regulations (StVZO) - Rotating beacon - Audible reverse warning signal - Speed limit: 20 km/h - Overhead guard - Exterior mirrors - Height-adjustable steering column - Access control: key switch - Driver’s seat comfort (fabric upholstery) - Single pedal operation - Joystick control - Magni Rotating Telehandler RTH 8.27 - STOCK MACHINE - Lifting capacity: 8,000 kg at 600 mm load center distance - Slewing range: 360° continuous rotation - Boom: robust boom with internally routed hoses - Max. lifting height: 26.60 m - Max. outreach: 23.10 m - Engine: Volvo TAD 582 VE Stage V diesel engine - 160 kW (218 hp) at 2,300 rpm Godpfew Uxrtsx Ah Doin - Drive: hydrostatic all-wheel drive - Frame: one-piece heavy-duty frame with leveling system - Scissor stabilizers - Brakes: service brake: hydraulically actuated oil-immersed multi-disc brake on each axle - Parking brake: hydraulic negative brake - Tires: 445/65 R22.5 - Steering: front-wheel-, all-wheel steering and crab steering mode - Dimensions: length 8,250 mm - Width 2,530 mm - Ground clearance 310 mm - Climbing ability: 40 % - Weight: 22,300 kg - Cabin: comfortable pressurized cab, 1030 mm wide - Fully sealed and air-tight - 100 % fresh air filter - Safety glazing with roof safety grille - Rear window can be opened - Lockable cab door (split) - Windscreen wiper with washer - Rear window wiper - Internal cab lighting - Steering column adjustable in height and tilt - Multi-adjustable comfort driver’s seat with lap belt - Air conditioning and heating - Premium seat (electrically tiltable, air suspension and headrest) - Working hydraulics/operation: load sensing system - Two 2-axis joysticks with armrests, Danfoss, with deadman function - CAN bus technology - Radio remote control - Lighting: two front headlights (parking, dipped and main beam), indicator system, tail and brake lights, reversing light, number plate lighting - Monitoring and control system: - 10-inch multifunction touchscreen with additional rotary control - Display and/or operation of: - Operating states - Driving settings - Stabilisers and various parameter configurations - Load chart depending on attachment - Automatic detection of attachment – RFID - Rear camera (displayed on multifunction touchscreen) - Attachments: Fork carriage with forks (FEM) - Speed: Standard 20 km/h (optional 40 km/h) - Paintwork: red - Documentation: CE certificate, TÜV inspection report - All further items are optional equipment and may replace parts of the standard equipment - 2 LED headlights on top of the cab – front - 2 LED headlights on top of the cab – rear - 2 LED headlights on the boom - Plastic outrigger pads (including bracket) - LSP 0.6 Ref: FANL1086303

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area Gsdpfxjyhkrrs Ah Djin * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r