Alçak şasi dorse

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Hebebett

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Excerpt from Equipment Specification Gooseneck: Gooseneck with front corners chamfered approx. 45° and rear taper approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor covering, approx. 30 mm thick. Loading Platform: Hydraulically liftable and lowerable platform following the gooseneck, length approx. 2,800 mm, rear taper approx. 1,000 mm x 8°. 6 pairs of folding lashing rings on the outside (LC 5,000 daN). 2 pairs of folding lashing rings on the outside (LC 10,000 daN). 1 pair of inwards-folding lashing rings at the front center beam (LC 10,000 daN). Cut-outs in the outer frame of the platform for inserting tie-down straps (LC 2,000 daN). Platform deck in grating type C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), over the axles with checker plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating covering C40/4 (point load approx. 2.2 t over approx. 20 x 20 cm area). Ramps with hydraulically foldable ramp sections. Hydraulic lifting unit, hydraulically lateral adjustable. Maximum load per pair: approx. 40,000 kg Landing Legs: JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Axles: Codpfx Aoyhkqzoh Dsgn BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg each. Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Braking System: WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – brand at our discretion. TPMS: TPMS tyre pressure monitoring system according to ECE R 141. Paintwork: HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection. Final coating with two layers of 2K topcoat, single colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey. Accessories Included: - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Grating cover in the gooseneck taper C30/3 (point load approx. 2 t over 20 x 20 cm) - Grating cover in the platform taper C40/4 (point load approx. 3.4 t over 20 x 20 cm) - On the checker plates above the king pin and loading platform: painted sand layer as anti-slip finish - Electro-hydraulic unit at the rear under the platform On the gooseneck, plug-in side and rear aluminium drop sides, approx. 2,440 x 400 mm (L x H). Rear galvanized insertable stanchions are removable. (Body length approx. 2,560 mm) (± 46kg) Electric cable winch with wireless remote control, approx. 5,400 kg pulling force, including wire rope approx. 9.5 mm thick, 24 m long, with cable guide roller (± 88kg) Bolted ring approx. 5 t for sheaving the winch cable on the neck, without deflection pulley (± 1kg) One galvanized toolbox, integrated into the chamfered gooseneck, with opening for winch installation (± 53kg) Grating covering on the gooseneck C30/3 (point load approx. 2 t over 20 x 20 cm) (± 355kg) 7 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the platform (± 21kg) Lifting axle on the front axle, controlled by TEBS E depending on actual axle load and current payload (± 69kg) 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) (± 35kg) -2