Düşük yükleyici

Nooteboom MCO-48*SANH*Tieflader*3xLenkachsen*hydraulische...

Koşul: ikinci el, kilometre: 417.260 km, güç: 265 kW (360,30 bg), ilk tescil: 07/2010, yakıt türü: dizel, boş ağırlık: 15.580 kg, azami yük ağırlığı: 10.420 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.800 mm, bir sonraki muayene (TÜV): 12/2024, frenler: sabit gaz kelebeği, renk: beyaz, şoför kabini: yataklı kabin, vites türü: mekanik, emisyon sınıfı: Euro 5, süspansiyon: çelik-hava, koltuk sayısı: 2, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.440 mm, yükleme alanı yüksekliği: 1.000 mm, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, ek farlar, hidrolik direksiyon, hız sabitleyici, kabin, klima, koltuk ısıtıcı, park ısıtıcısı, sisal lambaları, tır çekici bağlantısı, vinç, çekiş kontrolü, Vehicle location: Bovenden, Lg. Haus. Equipment: 1x comfort seat, 1x bunk, heated seat, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, 8-speed manual gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), differential lock, fog lights, work lights, storage box, leaf/air suspension, tow hitch air+light, aluminium tank, low-noise G1, lashing eyes, underrun protection, side aluminium underrun guard, pendulum flaps, roof hatch, rear-mounted crane, emergency stop, grab control, foldable, elevated operator seat, 4-point hydraulic outriggers, sliding function, green emission sticker. Wheelbase: 4,800 mm Body: Lotz flatbed with aluminium chequered floor, aluminium dropsides, and rear-mounted Palfinger PK 24502 F crane with 4-way outriggers and elevated operator seat. 8t front axle, rear axle H6 13t crown wheel 440, 7.5t liftable trailing axle, disc brakes front and rear, Telligent brake system with ABS and ASR, additional stabiliser for rear/trailing axles, hill start assist, PSM, pre-installation for toll collection, long-distance cockpit, pollen filter, additional warm air heater 2,000W, on-board diagnostics 2, transmission oil cooling, lower bunk, MB 124-10c MPA auxiliary drive with N-/M-speed. Loading height approx. 1,300mm! Load chart: 4.6m-4520kg, 6m-3210kg, 7.9m-2110kg, 10.1m-1560kg, 12.2m-1170kg, 14.4m-940kg, 16.7m-780kg, 18.9m-680kg. Hsdpjvhl Hysfx Actsl ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: ikinci el, kilometre: 1.070.078 km, güç: 330 kW (448,67 bg), ilk tescil: 06/2012, yakıt türü: dizel, boş ağırlık: 15.260 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, frenler: retarder, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 5, süspansiyon: hava, koltuk sayısı: 2, yükleme alanı uzunluğu: 6.750 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 950 mm, yatak sayısı: 1, Donanım: ABS, araç içi bilgisayar, basınçlı hava freni, diferansiyel kilidi, hız sabitleyici, kamyon kaydı, klima, merkezi kilitleme, park ısıtıcısı, sisal lambaları, vinç, | Mercedes 2545 L 6x2 flatbed truck with Hiab crane | Automatic transmission, retarder | 4 hydraulic extensions | EURO 5 | Trailer coupling | Auxiliary heater, air conditioning, refrigerator | Cruise control, electric windows, electric mirrors | Steerable axle + lift axle | Tires: 385/55/R22.5 | Wheelbase | Internal loading dimensions: L: 6.75 m, W: 2.48 m, sidewall height: 0.95 m | Total length Mass A: 10.48 m | Subject to errors, input mistakes, and prior sale. Hedswyuiaepfx Actsl

Koşul: yeni, azami yük ağırlığı: 30.540 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 2.990 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.010 mm, Üretim yılı: 2025, Donanım: ABS, SCHWARZMÜLLER 3-AXLE FLATBED SEMITRAILER RH100 – EXTENDABLE – For Building Materials and Construction Machinery Transport, NEW VEHICLE Hodpfowfu N Rjx Actol GVW (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Kerb weight: approx. 9 t (+/- DIN tolerance) Flatbed length: approx. 13,500 mm (front approx. 4,150 mm, rear approx. 9,350 mm) Flatbed width: approx. 2,540 mm Loading height front: approx. 1,060 mm at coupling height approx. 980 mm, rear 1,010 mm Extendable lightweight steel frame welded construction Extension length: approx. 4,000 mm, lockable in 500 mm increments Reinforced version for building materials transport, 20 t/5m at the centre of gravity; construction machinery transports up to 20 t (when fully retracted) Reinforced U-profile outer frame, 6 mm Tapered cross members, 4 mm Sloped rear frame, approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp – control light for pneumatic frame locking at front left of the gooseneck Energy guide chain in the central frame Frame locking with integrated lubrication bar 4 pairs of retractable 8 t lashing rings at the rear, 9 pairs of 10 t lashing rings retractable in the outer frame profile on both sides, fold-out for oversize securing 10 pairs of lashing pins with welded round steel on the lower outer frame 6 pairs of stake pockets with reinforcement bearer for square tube posts, 80x50x5 mm (longitudinal, approx. 3 mm clearance), on both sides of the outer frame 3 stake pocket crossmembers for square tube posts, 80x80 mm, with central beams Stake pocket crossmembers as storage holders for square tube posts 6 pairs of recessed container locks for: - 2 x 20 ft containers - 1 x 20 ft container centrally - 2 x 20 ft containers - 1 x 30 ft container Reinforced rear end plate with continuous ramp mounting rail Mechanical 2 x 12 t landing gears, single-sided operation & lift compensation 2 drop-leg supports at rear SAF Intradisc-B9 axles with disc brakes ø370 mm (19.5" disc), capacity 9 t/axle, on-road version Axle spacing: 1,310 + 1,410 mm Wheelbase: 7,650 mm SAF trailing axle with kingpin/friction steering, approx. 10° steering angle, electropneumatic reverse lock automatically actuated in reverse gear, additionally with cab switch and release valve Special axle lift on first axle, lifts and lowers automatically depending on load, with forced lowering, starting aid via pushbutton in cab / "3 x brakes" Kilometer counter 6x tyres 435/50 R 19.5, 164J 6x steel rims 14.00 x 19.5 Brake system in accordance with EC Directive 71/320 ECE R13 2-line compressed air braking system, EBS system 2S2M, one axle monitored RSS/RSP stability program Spring-loaded parking brake Steel air tanks Air suspension with raise/lower function, total adjustment approx. 200 mm Automatic ride height up to 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, "BASIC" service package Axle load display via EBS CAN-bus signal Tyre pressure monitoring in accordance with ECE Directive 141 35 mm wooden floor, longitudinally laid, over wheels with steel chequer plate cover Wooden floor double-sided impregnated Reinforced steel front wall approx. 1,800 mm, with centre supports integrated in the front wall 2 lashing eyes at top of corner posts Front steel corner posts integrated in the front wall, at the bulkhead (full side loading length available) 24-volt lighting system in accordance with EC Directive 76/756/EWG 2 full-LED multi-chamber tail light

Koşul: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid Hedpfx Aceuadk Netel - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Koşul: ikinci el, Üretim yılı: 2010, çalışma saatleri: 3.000 h, * Volvo EC 180 CL * Paletli ekskavatör * Üretim yılı: 2010 * Hızlı bağlantı sistemi Hodpfxjydhare Actel * 3 kova

Koşul: ikinci el, güç: 118 kW (160,44 bg), boş ağırlık: 26.500 kg, Üretim yılı: 2011, çalışma saatleri: 12.105 h, New Holland KOBELCO Reliable machine in excellent condition and well equipped: Features: Air conditioning Hydraulics for hammer/grab/tilting bucket Hodpfx Ajvibbpjctol 12.5t lifting hook MS25 quick coupler

Koşul: ikinci el, boş ağırlık: 24.200 kg, azami yük ağırlığı: 56.200 kg, ilk tescil: 05/1995, bir sonraki muayene (TÜV): 01/2020, toplam genişlik: 25.500 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, ön lastik ölçüsü: 245/70R17.5, işletme ağırlığı: 80.400 kg,

Koşul: ikinci el, toplam ağırlık: 59.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2000, Üretim yılı: 2000, Donanım: ABS, 4 Dingilli Alçak Şasi Treyler ----Rumen evrakları ---- Hsdpoyiiq Hsfx Actsl Donanım: Yönlendirilebilir dingil * Havalı süspansiyon Güvenlik: ABS * EBS

Koşul: ikinci el, kilometre: 506.136 km, güç: 330 kW (448,67 bg), ilk tescil: 11/2013, yakıt türü: dizel, dingil konfigürasyonu: 6x2, yakıt: dizel, yakıt deposu kapasitesi: 700 l, frenler: retarder, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2013, Donanım: ABS, AdBlue, EBS (Elektronik Fren Sistemi), araç içi bilgisayar, diferansiyel kilidi, elektrikli ayna, elektrikli cam sistemi, elektronik denge programı (ESP), hidrolik direksiyon, hız sabitleyici, klima, koltuk ısıtıcı, merkezi kilitleme, retarder, tır çekici bağlantısı, vinç, çekiş kontrolü, - Alarm sistemi Hsdpfxoxt Udhj Actel - Buzdolabı - Güneşlik - Isıtma - Isıtmalı ön koltuklar - Klima kontrolü - Merkezi yağlama - Radyo - Stepne - Tavan camı - Yağmur sensörü - Çift tekerlek dingili - Çok işlevli direksiyon simidi - İmmobilizer - Şerit takip uyarısı

Koşul: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin Hsdpfx Ajyhkrrsctol * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r