Sondaj kulesi

HUETTE HBR202 TF - Elektro Bohrgerät

Koşul: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards Nodpek Af Svefx Ak Sela - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Koşul: yeni, azami yük ağırlığı: 67.200 kg, toplam ağırlık: 85.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Extract from the specification. Full equipment details available on request. GOOSENECK Njdpfxergzv Ns Ak Sela * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with bevel approx. 1,000 mm x 10° * For tractor units: 6 x 2, 6 x 4, and 8 x 4 short * Detachable steel front bulkhead, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flush-mount lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized finish * 1 plug-in ALU tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm strong hardwood flooring above the gooseneck, checker plate flooring above the kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, incl. overhead gallows for securing supply lines (Faymonville couplings) * 2 pairs of stake pockets recessed in the gooseneck for plug-in stakes approx. 100 x 50 mm LOADING PLATFORM * Extendable loading platform, length approx. 11,000 mm, rear bevel approx. 500 mm x 10° * Pneumatic locking system with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the respective platform length * BPW axles and suspension, 1st axle self-steering, 2nd axle rigid, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * Tyres: 235/75 R 17.5 3PMSF twin tires * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous hardwood flooring, approx. 50 mm thick, on the loading platform and interrupted between the axles (providing increased friction coefficient) * Slotted holes for suspended and repositionable bridging elements: - on the fixed section behind the gooseneck - at the front of the platform * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate covering, slotted holes front and rear for suspended and repositionable bridging elements * 1 pair of flush-mounted lashing rings, lying, in the fixed front section of the loading platform (LC 10,000 daN) * 9 pairs of flush fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle alignment monitoring, without installation in the tractor * 1st axle with automatic lift axle function and starting aid according to EU Directive 2021/535 * Below the gooseneck and at the rear cross member, left and right, a 7-pin socket each with bracket for warning signs * Painted-on sand coating on the outer frame of the platform, the checker plates, and the transition area between the loading platform and...

Koşul: ikinci el, güç: 70 kW (95,17 bg), yakıt türü: dizel, renk: kırmızı, kaldırma yüksekliği: 9.000 mm, lastik boyutu: 15.5 / 80 - 24, lastik durumu: 98 yüzde, direk tipi: teleskopik, Üretim yılı: 2009, çalışma saatleri: 2.362 h, yük kapasitesi: 3.200 kg, Donanım: her tahrikli, hidrolik, kabin, palet çatalları, Gelände-Teleskoparmstapler MANITOU, Typ: MT 932 D-E3 - 4x4x4, Baujahr: 2010, Tragkraft: 3.200 kg, Hubhöhe: 9,00 m, lange Gabelzinken (Gabellänge: 1.180 mm / Aufnahmebreite: 1.120 mm) – Lastschutzgitter, Zusatzhydraulik, Schnellwechsler, 4-Zylinder PERKINS TURBODieselmotor (Typ: 2978/2200 - 95,20 PS / 70,00 kW bei 2.200 U/min), Allradantrieb und Allradlenkung (4x4x4) – Hundeganglenkung, Überlast-Warneinrichtung, geräumiges Fahrerhaus (niedrige Gesamthöhe, nur ca. 2.280 mm) – Colorglas, Komfortsitz, ROPS / FOPS, Anhängerkupplung (mit Stromanschluss), Straßenbeleuchtung, CPB, Warnleuchte, Außenspiegel (2x), Scheibenwischer (2x), Heizung/Lüftung, Halte- und Transportösen, Bedienungsanleitung (auf Deutsch). Bereifung: Geländereifen (15.5/80-24) – rundum ca. 98 %. Transportmaße: Länge ca. 5.850 mm (ohne Gabel ca. 4.600 mm), Breite: ca. 2.280 mm, Höhe: ca. 2.280 mm. Preis netto für den Export, im Inland zuzüglich gesetzlicher MwSt. ∗∗∗ Finanzierung möglich / Günstige Transportmöglichkeiten (weltweit) / Beim Export ist nur der Nettopreis zu zahlen (!) ∗∗∗ © pb. Nlsdpjuq Hypjfx Ak Sja

Koşul: ikinci el, Üretim yılı: 2014, yük kapasitesi: 5.000 kg, kaldırma yüksekliği: 21.000 mm, yakıt türü: dizel, inşaat yüksekliği: 3.050 mm, lastik durumu: 50 yüzde, ön lastik ölçüsü: 18 R22.5, arka lastik boyutu: 18 R22.5, renk: diğer, Special equipment: 3rd valve, heating, full cabin. Special equipment details: driver protection roof, 3rd hydraulic circuit, lighting, radio remote control, joystick. Njdji Rhtvspfx Ak Ssla

Koşul: yeni, azami yük ağırlığı: 65.400 kg, toplam ağırlık: 93.400 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2025, Pos. 1. Type STZ-VP 6 (245) (2+4) with pendulum axles The specified technical data are only valid when using a 4-axle tractor unit with the following data: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights - Speed 80 km/h Fifth wheel load: 22,000 kg Axle load: 6 x 12,000 kg Gross vehicle weight rating: 94,000 kg Curb weight: approx. 29,600 kg Payload: approx. 64,400 kg (depending on load chart / easyLOAD calculation) Dimensions Dimension b: 18,765 mm Total combination length: 24,165 mm Vehicle width: Gooseneck length x width: 3,700 mm x 2,480 mm Fifth wheel height (loaded): 1,300 mm Steering radius front/rear: 1,370 mm / 2,735 mm King pin: 3.5'' 2-axle front running gear Wheelbase: 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Njdpfxewg N N Ie Ak Sjla Steering axle arrangement: counter-steered 14,400 mm flatbed (external beams), single telescoping with disconnect point Length x width: 7,000 mm x 2,750 mm Telescopic extension by/max.: 3,400 mm / 10,400 mm Build height: 300 mm Plus 4,000 mm extension beam incl. Loading height loaded: approx. 450 mm 4-axle rear running gear Wheelbase: 3 x 1,510 mm Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced steering

Koşul: ikinci el, güç: 74,5 kW (101,29 bg), yakıt türü: dizel, renk: kırmızı, kaldırma gücü: 4 kg/m, kaldırma yüksekliği: 14.000 mm, lastik boyutu: 15.5 / 80 - 24, lastik durumu: 98 yüzde, direk tipi: teleskopik, Üretim yılı: 2007, çalışma saatleri: 1.048 h, Donanım: her tahrikli, kabin, palet çatalları, Rough terrain telescopic forklift MANITOU, model: MT 1440 SLT ULTRA TURBO Series III-E2 – 4x4x4, first operation: 2008, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS – QUICK COUPLER, ADDITIONAL HYDRAULICS, LOAD PROTECTION GUARD, 4-cylinder PERKINS TURBO diesel engine (101.32 HP / 74.50 kW at 2,200 rpm), REMOTE CONTROL, FOUR-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic stabilizers (2x / WIDE VERSION), SIDE SHIFT – REGULATION, CPB, OVERLOAD WARNING DEVICE, spacious cab (tinted glass), comfort seat (KAB), ROPS / FOPS, road lighting, WORK LIGHTS (front/rear), WARNING BEACON, external mirrors (2x), windscreen wipers (2x), heating / ventilation, trailer coupling, lashing and transport eyes. Tyres: BKT OFF-ROAD TYRES (15.5/80 – 24) – approx. 98% all around. Transport dimensions: Length: approx. 7,290 mm (approx. 5,930 mm without forks), Width: approx. 2,440 mm, Height: approx. 2,560 mm. Price is net export price; domestic sales plus statutory VAT. FINANCING AVAILABLE / LOW-COST TRANSPORT (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE IS PAYABLE (!) © pb Nledpouiyqdjfx Ak Sja

Koşul: ikinci el, güç: 74,5 kW (101,29 bg), yakıt türü: dizel, renk: kırmızı, kaldırma yüksekliği: 18.000 mm, lastik boyutu: 15.5 - 25, lastik durumu: 98 yüzde, direk tipi: teleskopik, Üretim yılı: 2011, çalışma saatleri: 2.847 h, inşaat yüksekliği: 2.540 mm, çatalların uzunluğu: 1.200 mm, fork taşıyıcı genişliği: 1.200 mm, yük kapasitesi: 4.000 kg, Donanım: her tahrikli, kabin, palet çatalları, Rough-terrain telescopic handler MANITOU, model: MT 1840 EP PRIVILEGE TURBO – 4x4x4, first use: 2012, LIFTING CAPACITY: 4,000 kg, LIFT HEIGHT: 18.00 m, RADIO REMOTE CONTROL, EMERGENCY LOWERING SYSTEM, LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,200 mm), AUXILIARY HYDRAULICS, LOAD PROTECTION GRILLE, 4-cylinder PERKINS diesel engine (101.32 hp / 74.50 kW at 2,200 rpm), CPB, FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x), SIDE SHIFT SYSTEM, OVERLOAD WARNING SYSTEM, PANORAMIC CAB (large cab) – tinted safety glass, ROPS / FOPS certified, GRAMMER comfort seat, trailer coupling, WORK LIGHTS (front & rear), road lighting, BEACON / REVERSING ALARM, windscreen wipers (3x), exterior mirrors (2x), heating / ventilation, OPERATING MANUAL (in German). Tires: BKT OFF-ROAD TIRES (15.5 – 25) – all approx. 98% tread remaining. Transport dimensions: Length: approx. 7,420 mm (approx. 6,100 mm without forks), width: approx. 2,400 mm, height: approx. 2,540 mm. FINANCING AVAILABLE / COST-EFFICIENT WORLDWIDE TRANSPORT / FOR EXPORTS, ONLY NET PRICE TO BE PAID (!). Nledpfx Aouiwv Rok Ssa

Koşul: ikinci el, Üretim yılı: 2018, çalışma saatleri: 907 h, kaldırma yüksekliği: 18.000 mm, yakıt türü: dizel, direk tipi: teleskopik, inşaat yüksekliği: 2.540 mm, güç: 55,4 kW (75,32 bg), fork taşıyıcı genişliği: 1.100 mm, çatalların uzunluğu: 1.200 mm, lastik durumu: 98 yüzde, toplam uzunluk: 7.420 mm, renk: kırmızı, kaldırma gücü: 4 kg/m, yakıt: dizel, Donanım: aydınlatma, her tahrikli, kabin, palet çatalları, tır çekici bağlantısı, Rough terrain telescopic handler MANITOU, model: MT 1840 ST3B TURBO - 4x4x4, first commissioned in 2019, LIFTING CAPACITY: 4,000 kg, LIFT HEIGHT: 18.00 m, LONG FORKS (fork length: 1,200 mm / fork carriage width: 1,100 mm) – ADDITIONAL HYDRAULICS, LOAD PROTECTION GUARD, QUICK COUPLER, 4-cylinder DEUTZ turbo diesel engine (model: TD 3.6 L4 – 75.34 HP / 55.40 kW at 2,200 rpm), CPB, FOUR-WHEEL DRIVE and ALL-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x), SIDE SHIFT SYSTEM, OVERLOAD WARNING SYSTEM, PANORAMIC CAB (spacious operator cabin) – tinted safety glass, ROPS / FOPS compliant, comfort seat, tow hitch, road lighting, windshield wipers (2x), exterior mirrors (2x), AUDIBLE / VISUAL WARNING SIGNAL, heating / ventilation, OPERATING MANUAL (in German). Tyres: BKT OFF-ROAD TYRES (15.5/80 - 24) – approx. 98% tread remaining. Transport dimensions: Length approx. 7,420 mm (approx. 6,100 mm without forks), width approx. 2,400 mm, height approx. 2,540 mm. FINANCING AVAILABLE / COST-EFFECTIVE WORLDWIDE TRANSPORT / EXPORT: NET PRICE ONLY PAYABLE © pb Njdpfx Aker Nvyks Sela

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 14.600 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 880 mm, toplam uzunluk: 14.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 245 / 70 R17.5, renk: mavi, Üretim yılı: 2008, Donanım: hidrolik arka platform, Color: Blue Payload Capacity: 72,600 kg Loading Floor Height: 885 mm Extendable Braked Main Features Manufacturer: Goldhofer Type: STZ L6 65/80A Semi Low Loader with Ramps Chassis Number: WG0STZL6A80030419 Year of Manufacture: 2008 Weights / Payload Capacity Kingpin Load: 26,000 kg Axle Load: 11,200 kg Total Axle Load: 6x 11,200 kg = 67,200 kg Gross Vehicle Weight (GVW): 93,200 kg Unladen Weight: 20,600 kg Payload Capacity: 72,600 kg Axles Axle Brand: BPW Air Suspension 1st Axle rigid Axles 2 - 6 hydraulic steering Axles 1 & 2 liftable High/Low Valve WABCO braking system Tyres: 245/70 R17.5 Dimensions Length: 14,600 mm Extension: +7,200 mm Max. Extended Length: 21,800 mm Loading Floor Width: 2,550 mm Height: approx. 885 mm - 925 mm Kingpin Height: +/- 1,350 mm Additional Information • Operated via truck PTO • Lashing rings • Stake pockets • Partially wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • Kingpin 3.5'' • Central greasing system • Oversize load marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = More Information = General Information Year of manufacture: 2008 Axle Configuration Tyre size: 245/70 R17.5 Axle brand: BPW Eco Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 11,200 kg Rear axle 2: Twin tires; Lift axle; Max. axle load: 11,200 kg; Steered Rear axle 3: Twin tires; Max. axle load: 11,200 kg; Steered Rear axle 4: Twin tires; Max. axle load: 11,200 kg; Steered Rear axle 5: Twin tires; Max. axle load: 11,200 kg; Steered Rear axle 6: Twin tires; Max. axle load: 11,200 kg; Steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg GVW: 93,200 kg Functionality Body brand: WABCO Platform height: 88 cm Extendable body: Yes Condition Technical condition: Very Good Nsdpjx R Undsfx Ak Sola Visual condition: Very Good Financial Information Price: On request Further information Please contact Stefan Schaapveld for more information.

Koşul: mükemmel (kullanılmış), ilk tescil: 08/2008, renk: yeşil, Üretim yılı: 2008, Çekilebilir üst yapı: Evet Teknik durumu: çok iyi Optik durumu: çok iyi Nsdpfeykz Uiex Ak Ssla