Damperli yarı römorkSTAS
V 10.50 / 57m³ / GMP Transport
Damperli yarı römork
STAS
V 10.50 / 57m³ / GMP Transport
Sabit fiyat KDV dahil değil
€15.960
(€18.992 brüt)
Koşul
Kullanılan
Konum
Korschenbroich-Glehn 

Temel veriler
Fiyat ve Konum
Sabit fiyat KDV dahil değil
€15.960
(€18.992 brüt)
- Satıcının konumu:
- Dieselstr. 9, 41352 Korschenbroich-Glehn, Almanya

Çağrı
Teknik detaylar
- Dingil konfigürasyonu:
- 3 dingil
- Ilk tescil:
- 06/2016
- Yükleme alanı uzunluğu:
- 10.500 mm
- Yükleme alanı genişliği:
- 2.480 mm
- Yükleme alanı yüksekliği:
- 2.200 mm
- Yükleme alanı hacmi:
- 57 m³
Teklif detayları
- Liste kimliği:
- A219-07-768
- Referans No.:
- 616
- Son güncelleme tarihi:
- 12.05.2026
Açıklama
Chassis
Made of aluminium, cranked chassis (volume version -80-100 mm). Two fully automatically welded I-section longitudinal beams with welded cross members. Tipping shaft welded into both longitudinal beams and mounted in plastic bushings for long service life. Chassis width: 1,600 mm.
Axles and Suspension
430 mm disc brakes. DCA axle assemblies, version 3x9 t with air suspension, air bellows centrally arranged to the chassis longitudinal beam. 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lifting-lowering valve.
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 30-40% on steel rims, 11.75 x 22.5 ET 120, UNI wheel bolts.
King Pin
2” bolted into a 10 mm thick plate.
Landing Legs
Aluminum single-action drop legs with pin lock, 2x10 t support load.
Brake System
According to E.G. standard, two-line system Wabco, spring-actuated parking brake on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system.
Electrical System
According to StVZO regulations with 2x3 Aspöck-type three-chamber light clusters, 24-volt system with 2x7 and 1x15 pin sockets, side marker lights, 2 separate halogen reversing lamps at approx. support height, 2 spotlights as RF interior spotlights operable from inside left. All air and electrical lines are neatly routed in plastic pipes.
Tipping Body / Tipper Body Fully Welded Inside
Aluminum tipping body, side walls made from 30 mm thick plank profiles (2-3 mm) welded, 600 mm wide, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight version, rear wall as universal door, straight version with 2 half-and-half wing doors each with a grain chute, automatic pneumatic operation with separate lever, lockable, rear cross member made of ALU swivels, two hold-downs with rubber buffers on the tipper body fastened to the frame at the front wall.
Hnsdpfx Ahsy Rwl Eszol
Hydraulics
Hydraulic cylinder mounted on front wall, working pressure 135 bar, make: Edbro, approx. 2.5 m hydraulic hose and loose half 1”, rubber stop with spring buffer mounted behind cylinder.
Accessories
6 Parlok mudguards, complete spray flaps across full vehicle width attached to underrun protection, spare wheel holder, foldable side underrun protection right, 3 tool boxes (2x inox left, 1x right), approx. 3 m aluminium ladder, 3 aluminium swing bars (70 mm diameter) raised approx. 150 mm centrally, additional centre-mounted bar receiver for positioning a total of 2 bars to widen loading width. Rolling tarp with central light strip and separate reinforcements in high-wear areas, approx. 660 g/m2 quality, full tarpaulin system, perimeter rubber cord at rear closure with two tension hooks attached to rear swing bar. Catwalk on frame with step access left and right, tarp closure on the side with grey tension straps, rear tarp closure with welded-in rubber cord for water protection, robust foldable aluminium underrun bar with two towing eyes left and right incl. safety pins, according to EU standard. 2 "Clear Pass" spray flaps on mudguards, 1 ALU grain hopper with drawstring bag mounted on the frame, holders for shovel, broom and scraper, etc.
Tipping body with accident damage on the left side (body)
Offer and pictures non-binding.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Made of aluminium, cranked chassis (volume version -80-100 mm). Two fully automatically welded I-section longitudinal beams with welded cross members. Tipping shaft welded into both longitudinal beams and mounted in plastic bushings for long service life. Chassis width: 1,600 mm.
Axles and Suspension
430 mm disc brakes. DCA axle assemblies, version 3x9 t with air suspension, air bellows centrally arranged to the chassis longitudinal beam. 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lifting-lowering valve.
Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 30-40% on steel rims, 11.75 x 22.5 ET 120, UNI wheel bolts.
King Pin
2” bolted into a 10 mm thick plate.
Landing Legs
Aluminum single-action drop legs with pin lock, 2x10 t support load.
Brake System
According to E.G. standard, two-line system Wabco, spring-actuated parking brake on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system.
Electrical System
According to StVZO regulations with 2x3 Aspöck-type three-chamber light clusters, 24-volt system with 2x7 and 1x15 pin sockets, side marker lights, 2 separate halogen reversing lamps at approx. support height, 2 spotlights as RF interior spotlights operable from inside left. All air and electrical lines are neatly routed in plastic pipes.
Tipping Body / Tipper Body Fully Welded Inside
Aluminum tipping body, side walls made from 30 mm thick plank profiles (2-3 mm) welded, 600 mm wide, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight version, rear wall as universal door, straight version with 2 half-and-half wing doors each with a grain chute, automatic pneumatic operation with separate lever, lockable, rear cross member made of ALU swivels, two hold-downs with rubber buffers on the tipper body fastened to the frame at the front wall.
Hnsdpfx Ahsy Rwl Eszol
Hydraulics
Hydraulic cylinder mounted on front wall, working pressure 135 bar, make: Edbro, approx. 2.5 m hydraulic hose and loose half 1”, rubber stop with spring buffer mounted behind cylinder.
Accessories
6 Parlok mudguards, complete spray flaps across full vehicle width attached to underrun protection, spare wheel holder, foldable side underrun protection right, 3 tool boxes (2x inox left, 1x right), approx. 3 m aluminium ladder, 3 aluminium swing bars (70 mm diameter) raised approx. 150 mm centrally, additional centre-mounted bar receiver for positioning a total of 2 bars to widen loading width. Rolling tarp with central light strip and separate reinforcements in high-wear areas, approx. 660 g/m2 quality, full tarpaulin system, perimeter rubber cord at rear closure with two tension hooks attached to rear swing bar. Catwalk on frame with step access left and right, tarp closure on the side with grey tension straps, rear tarp closure with welded-in rubber cord for water protection, robust foldable aluminium underrun bar with two towing eyes left and right incl. safety pins, according to EU standard. 2 "Clear Pass" spray flaps on mudguards, 1 ALU grain hopper with drawstring bag mounted on the frame, holders for shovel, broom and scraper, etc.
Tipping body with accident damage on the left side (body)
Offer and pictures non-binding.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
Beri kayıtlı: 2002
25 çevrimiçi ilan
İstek gönder
Telefon & Faks
+49 2182 ... ilanlar
Bu reklamlar da ilginizi çekebilir.
Küçük ilan
Lübbecke
2.526 km
3 yönlü damper
MANTGL12.250PS Kipper mit Kran+Funk
MANTGL12.250PS Kipper mit Kran+Funk
Küçük ilan
Babenhausen
2.401 km
Damperli yarı römork
LUECK
LUECK
Küçük ilan
Sinn
2.472 km
Üç taraflı damperli kamyon
MERCEDES-BENZActros 1851+SCHWARZMÜLLER 3Achs Dreiseitenkipper
MERCEDES-BENZActros 1851+SCHWARZMÜLLER 3Achs Dreiseitenkipper
Küçük ilan
Vuren
2.729 km
Damperli kamyon
StasSA339K / Tipper ALU / 58 M3 / Mercedes + Disc ...
StasSA339K / Tipper ALU / 58 M3 / Mercedes + Disc ...
Küçük ilan
Furth im Wald
2.116 km
Damperli yarı römork
SCHWARZMÜLLER3-A GETREIDE/GRAIN ALU 57m3 6370kg NEW/NEU
SCHWARZMÜLLER3-A GETREIDE/GRAIN ALU 57m3 6370kg NEW/NEU
Küçük ilan
Saasveld
2.641 km
Damperli kamyon
StasS300CX 58m3 Vol alu Liftas SAF Schijfremmen
StasS300CX 58m3 Vol alu Liftas SAF Schijfremmen
Küçük ilan
Gotha
2.331 km
Damperli yarı römork
Schmitz CargobullKipper Alukastenmulde 52m³
Schmitz CargobullKipper Alukastenmulde 52m³
Küçük ilan
St.Lorenz
2.020 km
Damperli yarı römork
SCHWARZMÜLLERH-SERIE DREISEITENKIPPER*2011*1HAND*LIFTACHSE*
SCHWARZMÜLLERH-SERIE DREISEITENKIPPER*2011*1HAND*LIFTACHSE*
Küçük ilan
Ennigerloh
2.541 km
Damperli yarı römork
KempfSKM 35/3 Zustand gut, schlammdicht 50 cbm
KempfSKM 35/3 Zustand gut, schlammdicht 50 cbm
İlanınız başarıyla silindi
Bir hata oluştu
































































































































































































