Alçak şasi dorse

FAYMONVILLE 3-Achs-Tiefbett 3x10 t Außenträger

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Equipment excerpt. Full specification upon request.

Gooseneck:
* Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long
* Gooseneck hydraulically lift/lowerable and detachable
* For tractor units: 6x4 or 8x4

Lowbed:
* Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long
* Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking
* Supply lines are protected within the extendable beams and automatically adjust to the lowbed length
* 7 pairs of lashing rings foldable outward (LC 10,000 daN)
* 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings

Rear Undercarriage:
* Rear chassis with closed outer frame and checker plate cover
* Chassis with excavator trough, closed in the rear half to accommodate air tanks
* 3 pairs of lashing rings foldable outward (LC 5,000 daN)
* 1 pair of lashing rings foldable outward (LC 10,000 daN)
* 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN)

Axles:
* BPW axles and suspension, all axles hydromechanically forced steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve

Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F)

Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)

Paintwork:
* HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL

Including accessories:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized connection bar at the front
* Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit)
* Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks
* Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings
* Electro-hydraulic power unit
* Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO)
* Yellow reflective tape to EU regulations on sides, extension and rear of the trailer
* At the gooseneck and rear, left and right, a bracket for warning signs including a socket
* Manual and description on USB stick
* Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps
* 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4
Njdpfxjy Uwu Ie Alajlb
* 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
* On the gooseneck, a separate air connection with air gun
* 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.