Flatbed/branda

Fliegl SDS 390 Gardine Mega

Further Information
Fine-grained steel welded construction, with preload light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly bevelled, new version with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, one-sided operation, with straight lower section, without thrust compensation.
Note: Free support leg clearance or free pivot radius to the rear approx. 1930 mm, sliding ladder at the rear, lateral door retainers, 2 chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection, quarter-shell mudguards in front of the first axle and behind each axle, with anti-spray mud flaps according to EC standards, rear impact protection.

SAF disc brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption, air suspension.
2-line compressed air braking system, colour-coded line installation for easy service, spring-type parking brake, 2 polarity-safe coupling heads at the front, without connecting line, EBS electronic braking system with EBS socket at the front, without connection cable.
Note: The trailer may only be towed by tractor units which ensure the effectiveness of ABS! With lifting & lowering valve, vehicle driving stability system.
435/50 R19.5 tyres, make at manufacturer's discretion, steel rims finished in factory silver.
Redpfx Aei Ri E Hsaajch

24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at front, 2 white/red lane-keep lights at rear, two 7-pin polarity-safe sockets at front, without cables.
Floor: approx. 30 mm coated plywood, laid on longitudinal cross members for high point load capacity, suitable for fork lift axle load up to max. 7100 kg

Front wall / corner stanchions at front: 2, 580 mm high, steel corner stanchions in volume design, release device for curtain at front wall, crash blocker, with lower internal steel impact protection at approx. 140 mm height.

Centre stanchions: 3 pairs of sliding stanchions along the full length, with quadruple stake pockets and long bottom pocket, 3 pairs of stanchion positions
Slats: 5 rows of wooden drop-in slats.

Rear wall / corner stanchions at rear: Rear corner stanchions steel up to lower edge of roof, attachment for curtain with round tube and tensioning ratchet, two-wing rear portal doors with two internal lock rods each.

Curtain: Curtain with welded-in horizontal and vertical straps, tensioning fasteners made of stainless steel
Roof: Sliding roof, rear end-lift foldable, roof sliding from back to front, L-roof rail for automotive industry, internal width between roof rails approx. 2490 mm, curtain colour: white, 400 Roof non-elastic, minimal sagging of roof rail during loading/unloading, optimal rain gutter at the rear (on top of end stanchion, above doors), EcoLift - lift roof can be raised by approx. 380 mm, with gas strut assistance, 3 driving positions at the front: internal height front approx. 2900mm / 2950 mm / 3000 mm, set to approx. 3000 mm
Germany, Type approval according to EC 2007/46, 24/7-service hotline, Fliegl manufacturer certificate for body stability according to EN 12642 XL, prepared for single-line number plate holder, warning sign according to ECE-70, reflective stripes: white, continuous on lower side curtain and in corners at the top (when visible side walls, stripe at the bottom on side wall), reflective stripes: red, surrounding the rear portal.
Frame DB 7350 novagrau, 10 years corrosion warranty, landing l

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.