Kullanılmış Faymonville Max Trailer 3+5 Tiefbett (Baggerbett) satın al (58.389)

Koşul: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually Lajdpfx Aeunrapoicsb - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Koşul: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Complete specifications available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle), removable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front chamfer approx. 60° * Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6x4 or 8x4 * Detachable steel front wall, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel mount inside on the front wall of the gooseneck with bracket Laodpfx Aieyhkqnjcsb * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN) * On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish * On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish * 3.5 inch kingpin * TPMS tyre pressure monitoring system according to ECE R 141 * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING DECK: * Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams * One locking position approx. every 500 mm in the extension * 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN) * 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN) * Folding extensions, approx. 230 mm per side (WITHOUT wooden planks) * Extension planks, loose, framed in steel * Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN) * 2 pairs of screw rings M24 (LC 8,000 daN) included REAR RUNNING GEAR: * Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position * Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit * 4 pairs

Koşul: ikinci el, makine/araç numarası: ***YAMT13XX6K0104043, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.410 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2019, Chassis Chassis height: 87 cm Kingpin / Fifth wheel diameter: 2 inch Kingpin / Drawbar height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading deck length: 930 cm Ramp length: 395 cm Gooseneck length: 415 cm Low-loader: ✓ Maximum width: 300 cm (25 cm per side) Maximum length: 1380 cm Extendable: ✓ Tank Fuel: ✓ = Further information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: SAF Ledpfx Asu H D R Eoicsab Brakes: drum brakes Suspension: air suspension Axle 1: twin tyres; left outer tyre tread: 60%; right outer tyre tread: 60% Axle 2: twin tyres; left outer tyre tread: 20%; right outer tyre tread: 30% Axle 3: twin tyres; steering; left outer tyre tread: 55%; right outer tyre tread: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Functional Body manufacturer: Faymonville Loading platform height: 87 cm Identification Registration number: C505325 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Koşul: ikinci el, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the equipment list. Complete specification upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading bed * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyre size 205/65 R 17.5, twin-mounted Axles: * BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function * The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually Brake system: * Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 Pure White * Rims in silver Electrical system: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Lsdpex Uvlrjfx Aiceab Included accessories: * 2-inch kingpin * Galvanised steel front wall approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings mounted on the galvanised connection rail at the front * 4 wheel chocks with holders on the front wall * Mountings at the rear of the gooseneck for aluminium loading ramps * Galvanised folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape as per EU regulations at sides, extension, and rear * Mounts for warning plates, left and right on the gooseneck and rear panel, including socket * Mudflap at the rear of the trailer * Manual and documentation on USB stick * European reflective plates (Red-Yellow) at the rear * 80 km/h speed stickers at the rear and both sides * Audible reverse warning signal * Load pressure gauge for axle load determination, including load chart

Koşul: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform Ledpfxsu Sd U Uo Aicjab * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Koşul: ikinci el, Üretim yılı: 2018, Faymonville Maxtrailer F-S43-1AAF. Yıl: 2018. 9 ton SAF akslar. Boş ağırlık: 9.961 kg. Azami ağırlık: 45.000 kg. König pimi yükü: 18.000 kg. Laedpfxey Ay R Ie Aicsb Güç destekli direksiyon, 3 yönlendirilebilir aks. 7,5 metre uzatılabilir. Havalı süspansiyon. Paslanmaz çelik alet kutuları. Radyo uzaktan kumanda. 1. aks kaldırılabilir aks. EBA, ABS, ALB. Zemin ölçüleri: U: 13.550 mm. G: 2.480 mm. Y: 1.400 mm. Y (Alüminyum yan panolar): 600 mm. Lastikler: 385/65R22,5 %70. ID NR: 513. Heinhuis’in genel hüküm ve koşulları, Heinhuis’in tüm ilan, teklif ve fiyatlandırmalarında, yapılan tüm sözleşmelerde ve bunları önceleyen müzakerelerde geçerlidir. Cevabınızın herhangi bir biçimiyle, Heinhuis genel hüküm ve koşullarının geçerliliğini kabul ettiğinizi ve bu hükümleri okuduğunuzu beyan etmiş olursunuz. Fiyatlarımız ihracat net fiyatlardır. = Daha fazla bilgi = Üretim yılı: 2018 Boş ağırlık: 9.961 kg Yük kapasitesi: 35.039 kg Azami toplam ağırlık: 45.000 kg Uzatılabilir yapı: Evet = Şirket Bilgileri = Daha fazla bilgi için: WhatsApp:

Koşul: ikinci el, boş ağırlık: 11.900 kg, azami yük ağırlığı: 39.060 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, toplam uzunluk: 13.100 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Rear gooseneck in straight design - 3 pairs of lashing rings (LC 5,000 daN) Laodsxwnfmspfx Aicob Extendable Load Floor: - Extendable load floor - 5 pairs of swivel-out lashing rings (LC 5,000 daN) - 3 pairs of swivel-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the load floor (LC 10,000 daN) - Cutouts in the external frame of the load floor for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, checker plate over the axle area Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically foldable ramp sections, hydraulic lifting system, and hydraulic lateral adjustment - Maximum load per pair: 40,000 kg Axles and Tyres: - BPW axles, two rigid axles, two steering axles - Air suspension, drum brakes, with lift/lower function - The self-steering axles feature an electro-magnetic reverse lock, activated automatically when reversing or manually - Axle tools - Tyres: 205/65 R17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with mount in front of front wall - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the front galvanized connection strip - 4 wheel chocks with holders on the front wall - Galvanized folding supports under the inclined section of the loading area - A mounting bracket for beacon at the rear of the semi-trailer - Galvanized extendable extensions, approx. 230 mm per side - White reflective tape on side in compliance with EU regulations, extension and rear red - One bracket per side at gooseneck and rear panel for warning boards, including socket - One mudguard at the rear of the semi-trailer - European reflector plates (red-yellow) at rear - ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm, plug-in design - The rear galvanized insert stakes are removable. Total body length approx. 2,560 mm - 7 pairs WADER container pockets: - 1x 20ft container on the load floor - 1x 40ft container on the load floor - 1x 40ft container above the gooseneck - 2x 20ft containers - Support stand with 1 pair WADER container pockets (king pin load approx. 20,000 kg) - 7 pairs of stake pockets for insert stakes 100 x 50 mm in outer frame of load area - Lift axle on front axle with control via TEBS E depending on current axle load and loading condition - Sliding mounting rail for ALU approach ramps at the rear of the vehicle - Sanded, painted non-slip coating applied to checker plates on the gooseneck and load floor - Four extendable warning boards (approx. 400 mm extension) approx. 423 x 423 mm with position lamp - Bracket for beacon on the warning boards - 80 km/h speed stickers on rear and both sides - Load gauge for axle load determination including load chart

Koşul: ikinci el, azami yük ağırlığı: 34.030 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, bir sonraki muayene (TÜV): 07/2026, toplam genişlik: 2.480 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specification available upon request. Neck (Gooseneck): * Gooseneck with rear taper approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Loading platform with hardwood covering approx. 30 mm thick; platform behind the gooseneck hydraulically height-adjustable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside, central beam front (LC 10,000 daN) * Grating cover C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm), over the axles checker plate covering Two-piece steel ramps: * One pair of galvanized, heavy-duty two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with C40/5 grating cover (point load approx. 8 t on 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position are not considered as part of the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 trailing steering axle * Technical axle load: each 12,000 kg * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Colors: * Semi-trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: Laedsy Nu Hkopfx Aiceb * 1 spare wheel holder below loading platform, right side in driving direction * 2-inch king pins * Galvanized steel front wall * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holder on the front wall * 3 height wooden boards * Galvanized folding supports beneath the ramped section of the loading area * Height-adjustable tarpaulin structure, approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains * EDSCHA roof, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear walls) * 3 pairs of sliding stakes on the loading platform * The body can be hydraulically widened rear left/right by approx. 750 mm * Sliding tarp with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of body approx. 3,960 mm (loaded) * Driving with an open sliding roof is not permitted and will damage the tarp * Anti-slip sand coating painted onto checker plates on gooseneck and loading platform * Cover plates to bridge the space between ramps and loading platform * Electro-hydraulic unit at the rear under the loading platform * Left and right at the gooseneck and ramps, each with a holder for warning signs, including socket * Ramp control valves positioned on the right side of the trailer * Grating cover in the gooseneck rear slope C30/3 (point load approx. 2 t on 20 x 20 cm) * Grating cover in the loading platform's sloped section...

Koşul: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Ljdpfov Hr Axox Aicjab Loading Platform: - Extendable loading platform with rear bevel approx. 500 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 4 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table 250 mm - Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, checker plate over the axles Axles and Tyres: - BPW axles, hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tool kit - Tyres: 235/75 R17.5 Braking System: - Braking system compliant with EU regulations, EBS-E (4S3M) Included Accessories: - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring - Recess at rear of gooseneck to accommodate ALU loading ramps - Galvanized, extendable widening by approx. 230 mm per side - European reflector panels (red-yellow) at the rear of the trailer - White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear - Holders for warning signs on both the gooseneck and rear plate, including sockets left and right - Galvanized folding supports under the rear bevel of the loading platform - Mounting bracket for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container - 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform - Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle - Lift axle on the front axle with control via TEBS E according to current axle load and loading condition - Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - Beacon bracket on the warning signs - Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring - Painted sand layer on checker plate above king pin and loading platform for slip resistance - 80 km/h speed sticker at the rear - Load gauge for determining axle loads including load chart

Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.500 kg, izin verilen dingil yükü (dingil 2): 10.500 kg, ilk tescil: 06/2017, toplam uzunluk: 7.000 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 880 mm, süspansiyon: hava, lastik boyutu: 235/70 R17.5, lastik durumu: 75 yüzde, renk: diğer, Üretim yılı: 2017, Donanım: ABS, = Diğer seçenekler ve donanımlar = - 2 aks - Havalı süspansiyon = Diğer bilgiler = Aks konfigürasyonu Lastik ebatları: 235/70 R17.5 Lastik diş derinliği: %75 Frenler: kampana frenler Arka aks 1: çift teker; Maks. aks yükü: 10.500 kg Arka aks 2: çift teker; Maks. aks yükü: 10.500 kg Ağırlıklar Azami toplam ağırlık: 21.000 kg Durum Teknik durumu: çok iyi Görsel durumu: çok iyi Hasar: yok Kimlik Plaka: QALO590 Laedey D Hl Iepfx Aicsb

Koşul: yeni, azami yük ağırlığı: 40.320 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Equipment excerpt. Full equipment details available upon request. Gooseneck: * Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick. Loading area with 5 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate surface above the axles Landing legs: Lajdpfxoy Aug De Aicsb JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Tyres: * Tyres 205/65 R17.5 - brand of our choice TPMS: * TPMS tyre pressure monitoring system pursuant to ECE R 141 Axles: * BPW axles, two rigid axles, two steering axles * Air suspension with lifting/lowering feature * Drum brakes * Self-tracking steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Brake system: * WABCO braking system according to EU regulations with EBS-E (4S3M) Electrical system: * Electrical system according to EU standards, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash synchronously with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Trailer color RAL 3002 Carmine Red * Wheels Silver Grey * Tarpaulin RAL 9006 (brilliant direct) Options included: * One mounting bracket each for warning signs on the left and right at the gooseneck and rear, including socket * 2-inch king pin * Galvanized steel bulkhead * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder mounted on the bulkhead * 3-level wooden boards * Galvanized folding supports under the loading area chamfer * Mount for beacon at the rear of the trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front bulkhead with a tensioning mechanism for the sliding curtains. Height-adjustable by approx. 400 mm * EDSCHA roof, forward-slidable on ALU roof bearer profiles (bolted to front and rear wall) * 3 pairs of sliding stanchions in the loading area * The body can be hydraulically widened at the rear to the left and right by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarpaulin with 700 mm surplus in length, with tension straps approx. every 600 mm. Height to top edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will cause damage to the tarpaulin * Rear of the body with closed anodized ALU swing doors * Hook-in rail for ALU drive-on ramps at the rear of the vehicle * Control valves for hydraulic body widening mounted on the right trailer side * White reflective tape in accordance with EU regulations, red tape at the rear * Electro-hydraulic unit mounted at rear under loading area * Mud flaps at the rear of the trailer * European reflective warning signs (red-yellow) at the rear of the tr

Koşul: yeni, azami yük ağırlığı: 58.860 kg, toplam ağırlık: 73.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete inventory of vehicles, including units available for immediate or short-term delivery, can be found on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45°, rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 500 mm x 8° * 8 pairs of foldable lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Two-section steel ramps: * One pair of galvanized two-section steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber covering * Ramp with hydraulically folding ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle steered (leading), 2nd and 3rd axles fixed, 4th and 5th axles trailing steer, air suspension with lift/lower function, drum brakes * Trailing steering axles with electro-magnetic reverse lock, activated automatically when reversing or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) compliant with ECE R 141. Data transfer to the truck unit is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck unit must be able to receive and display this data. Landing legs: * JOST mechanical landing legs with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M), without connector lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Ljdpfx Ajy Augweicoab Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connectors as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot blasted after welding using a wheel blast system * Second blasting using corundum for optimal adhesion of paint system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection * Final coating using 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, as per RAL system 841GL * Rear section metallized and painted in RAL 9010 pure white Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings at the galvanized front connector panel * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the platform’s rear bevel * Super Grip rubber ma

Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Lodpfsy Auhuox Aicoab * Hardwood flooring, approx. 30 mm thick Load area: * Load area with rear bevel, approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) * Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering Two-part steel ramps: * 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area * Ramps with hydraulically foldable sections and hydraulic lifting device * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 trailing steer axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Tyres: * Tyres: 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R 141 Braking system: * WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (pure white) * Wheel rims in silver Incl. accessories: * One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket * 1 spare wheel carrier under the load area on the right * 2-inch kingpin * One galvanized steel front wall * At the galvanized front connection rail: yellow-red air couplings * 4 wheel chocks with holders at the front wall * 3-tier wooden planks * Galvanized folding supports under the rear bevel * Holder for beacon at the rear of the trailer * Height-adjustable curtain structure – approx. 3,960 mm * Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm * EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls) * 3 pairs of movable stanchions in the load area * Body hydraulically expandable to left/right at rear by approx. 750 mm * Sliding roof with high-lift portal carrier * Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O

Koşul: yeni, azami yük ağırlığı: 37.980 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details upon request. Gooseneck: * Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform in extendable design: * Extendable load platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface according to ISO 11992. For correct display, the towing vehicle must be capable of transmitting and displaying this data. Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be activated via reverse gear and manually * Air suspension with raise/lower valve * Axle tool Laodsy Aufmspfx Aicob Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction of high-strength fine-grained steels * Steel grades: S355J2+N / S355MC (yield strength 355 MPa), S690QL / S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned after welding with shot-blasting system * Secondary blasting with corundum for optimum coating adhesion * Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 carmine red, according to RAL system 841GL * Wheel rims in silver grey * Rear section metalized and painted in RAL 9010 (pure white) * Paint system tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO 1185 24S ISO 3731 15-pin ISO 12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with holder at the front wall * Provision at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under the rear bevel of the loading area * On the gooseneck and rear panel left and right, each with a holder for warning boards including socket * Load manometer to determine axle loads including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Koşul: ikinci el, boş ağırlık: 10.650 kg, azami yük ağırlığı: 40.310 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.650 kg, Donanım: ABS, A current and comprehensive inspection and function report is provided with every used semi-trailer. Gooseneck: - Gooseneck with 30 mm thick hardwood flooring - Gooseneck, straight design at rear - 3 pairs of lashing rings (LC 5,000 daN) Loading Area: - Extendable loading platform - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cut-outs in the outer frame for attaching tensioning straps (LC 2,000 daN) - Approximately 48 mm thick hardwood floor, anti-slip chequer plate above the axles Axles and Tyres: - BPW axles, two rigid axles and two trailing steering axles - Air suspension with drum brakes, raising/lowering function - Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually - Axle tools - Tyres: 205/65 R17.5 Brake System: - WABCO braking system compliant with EU regulations featuring EBS-E (4S3M) Steel Construction: - Structure made from high-strength fine-grain steels - Steel grades: * S355J2+N/S355MC (yield strength 355MPa) Lajdpfoxfa E Ujx Aiceb * S690QL/S700MC (yield strength 690MPa) Paintwork: - First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour in Nova Grey Included Accessories: - Spare wheel carrier in front of headboard - 2" kingpin - Galvanised steel front wall approx. 400 mm high - Galvanised connection strip at the front with yellow-red air couplings - 4 wheel chocks with holder on the front wall - Galvanised foldable supports under the taper of the loading platform - Mount for a beacon at the rear of the trailer - Galvanized, extendable width extensions approx. 230 mm per side - White reflective tape according to EU regulations on sides, extension, and rear (red at rear) - At the gooseneck and rear panel, left and right: one holder each for warning signs including socket - Mudflap at the rear - European reflective plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Removable plug-in ALU drop sides and rear wall on the gooseneck approx. 2,440 x 400 mm - Rear, galvanised plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1 x 20ft container on loading platform; 1 x 40ft container on loading platform; 1 x 40ft container above gooseneck; 2 x 20ft containers - 7 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Lift axle on front axle with control via TEBS E depending on actual axle load and current load status - Adjustable hook rail for ALU ramp attachments at the rear of the vehicle - Sand layer painted onto checker plates on gooseneck and loading area as slip protection - Four warning panels, extendable by approx. 400 mm, approx. 423 x 423 mm, each with position light - Warning panels equipped with beacon mount - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load diagram - HRM metal coating (High Resistance Metallisation) on the outer frame - Complete steel structure shot-blasted; subsequently, defined visible surfaces hot-metallized with ZINACOR 850 (zinc 85% - aluminium 15%)

Koşul: ikinci el, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report. Gooseneck: Ljdpfx Aioyffd Dscjab - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Extendable loading platform with rear bevel of approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Two-piece steel ramps: - One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning - Maximum load per pair: 40,000 kg Accessories included: - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised connection strip at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power pack - Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles - Mounting provision at rear of gooseneck for ALU approach ramps - European reflective signs (red-yellow) at rear of trailer - White reflective tape according to EU regulations at the sides, at the extension, and red at the rear - On the gooseneck and ramps, left and right, a bracket for warning signs including socket - One mount for a revolving beacon at the rear of the trailer - Galvanised folding supports under the platform’s rear slope - Control valves for the ramps mounted on the right side of the trailer - Cover plates to bridge the gap between ramps and platform - Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanised stub posts are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap - 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container - 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Galvanised platform extensions, extendable approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope - Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition - Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light - Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring - Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform - 80 km/h speed stickers at the rear and on both sides

Koşul: yeni, toplam ağırlık: 58.000 kg, Üretim yılı: 2026, Low-bed semi-trailer MAX100 4 A 8.60 U Technical Data Speed: 80 km/h Gross Vehicle Weight: 60,800 kg Fifth Wheel Load: 18,000 kg Axle Load: 42,800 kg Tare Weight: Payload: Gooseneck Length: 3,850 mm Loaded Fifth Wheel Height: 1,250 mm Loading Platform Length: 8,600 mm Extendable by: 5,400 mm Axle Spacing: 1,360 mm Steering Radius (rear): 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Stroke: -55/+145 mm Technical Description Gooseneck With 45° chamfered front corners and rear chamfer approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) 30 mm thick hardwood floor Extendable loading platform With rear bevel approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings (LC 5,000 daN) 3 pairs of outward-folding lashing rings (LC 10,000 daN) 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000) Approx. 48 mm thick hardwood flooring, chequer plate above the axles Ramps Two-part steel ramps One pair of galvanized, two-part steel ramps, approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm hardwood flooring Ramp sections hydraulically lifted and folded in, hydraulic lift and hydraulically adjustable position Max. load per pair: 40,000 kg Tyres 235/75 R 17.5 Brake System compliant with EU regulations, with EBS-E (4S3M) Without connection lines to the tractor unit Paintwork First-class, long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by 2-component zinc dust primer High-quality 2-component (2K) top coat, single colour, in RAL shades of choice Rear section metallized and painted in RAL 9010 (Pure White) Landing Legs: JOST mechanical landing legs with 2-speed gearbox for 24t Lifting capacity (50t test load) Steel construction made from high-strength fine-grained steels. Steel Qualities: Steel construction made from high-strength fine-grained steel S355J2+N/S355MC (Yield Strength 355MPa) S690QL/S700MC (Yield Strength 690MPa) Electrical System according to EU regulations, lighting: LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets Connection as per ISO. 24N IS0-1185 24S IS0-3731 15-pin IS0-12098 Accessories included: One galvanized steel headboard approx. 400 mm high 2" king pin 4 wheel chocks with holders on the headboard One holder for revolving beacon at rear of trailer SAF axles, two rigid axles, one self-steering axle, air suspension, with drum brakes, with raise/lower function The self-steering axle with electromagnetic reverse lock, can be activated by reverse gear or manually Axle tools included Support for ALU approach ramps at the rear of the gooseneck Galvanized folding supports under the loading platform chamfer Mechanical safety lock for the loading platform extension One spare wheel with holder in front of the headboard Lsdsg Sk T Djpfx Aiceab Yellow reflective tape as per EU regulations on sides, extension, and rear of trailer At the front galvanized connector strip, yellow-red air couplings On gooseneck and rear apron left and right, mounts for warning plates, including sockets A mudflap at the rear of the trailer Manual and description On the gooseneck: Plug-in aluminium sideboards and rear wall, approx. 2,440 x 400 mm (LxH) Rear galvanized stanchions are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container locks in the loading platform for a 20', 30', or 40' container (±30 kg) 6 pairs of pockets for plug-in stanchions

Koşul: yeni, azami yük ağırlığı: 36.245 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, Our complete vehicle inventory—including vehicles available immediately or on short notice—can be found on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Loading area with hardwood floor and rear chamfer approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the external frame of the loading area for attaching tension belts (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data. Brake system: * Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel structure: * Steel construction made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system per EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a blast wheel machine after welding, with a second shot-blasting using corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final painting with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint finish tested in salt spray test as per ISO 9227-NSS * Cavities sealed with special wax Including the following additional equipment: * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holders * 2-inch kingpin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the platform, right side in the direction of travel * Galvanized folding supports under the chamfered loading area * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high Lajdpfxoyvnfaj Aiceb * Non-slip painted sand coating on the central frame member * 1 INOX toolbox transversely under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform for accommodating 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of crosswise mounted stake pocket rails in the loading area for plug-in stakes approx. 100 x 50 mm * Rack for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Mount for aluminum drive-on ramps, transversely under the platform behind the axles * 1 beacon light supplied l

Koşul: yeni, azami yük ağırlığı: 47.300 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform with rear bevel of approx. 1,000 mm x 8° * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, brand of our choice Axles: * BPW axles; two fixed, two self-steering, air suspension, with drum brakes and lift/lower function * The self-steering axles have an electro-magnetic reversing lock, activated via reverse gear or manually * Axle tools Brake System: * WABCO braking system according to EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel Structure: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) Lsdjyvnfgjpfx Aiceab * ASPÖCK-UNIBOX on the front connecting rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: * Premium, long-lasting corrosion protection for the shot-blasted welded frame, provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single-color in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2" king pin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection rail * Recess at the rear of the gooseneck for ALU loading ramps * Galvanized folding supports under rear bevel of platform * Bracket for warning beacon at trailer rear * Brackets on both sides of gooseneck and rear for warning panels incl. socket * TPMS tyre pressure monitoring system according to ECE R 141 * Removable ALU side and rear boards on gooseneck, approx. 2,440 x 400 mm (L x H); galvanized rear posts removable (superstructure length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container pockets in the platform for one 20' (30') or one 40' container * Adjustable mounting rails for ALU loading ramps at the vehicle rear * 6 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame of the platform * Galvanized outriggers extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control depending on current axle load and load condition * 2 LED reversing lights mounted on rear panel * 2 pairs of ferry-

Koşul: ikinci el, azami yük ağırlığı: 44.420 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 11.500 mm, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the specifications. Complete specifications available on request. Loading area: * Loading platform with approx. 30 mm thick hardwood floor * 9 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 10 pairs of stanchion pockets in the outer frame of the loading area for plug-in stanchions approx. 100 x 50 mm Landing legs: * Hydraulic landing legs Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: * BPW axles, rated 10,000 kg each; first axle hydro-mechanically steered, second axle fixed, third axle hydro-mechanically steered, mounted on turntable * Air suspension with lift/lower valve Brake system: * WABCO brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin socket connectors according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (Yield strength 355 MPa), S690QL/S700MC (Yield strength 690 MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot blast machine * Second abrasive treatment with corundum for optimal coating adhesion * HRM metallizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coating: 2 layers of 2K top coat, single color in RAL 9005 Jet Black according to the RAL 841GL system * Rear section metallized and painted in RAL 9010 Pure White * Rims painted silver-grey * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories included: * Loading platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel headboard (EN12642-XL), approx. 1,200 mm high * At the galvanized front connection strip, DUOMATIK air couplings * Storage for approx. 1,000 mm plug-in stanchions in the central chassis at the rear * Mounts for warning boards, including sockets, left and right at gooseneck and rear panel * White reflective tape on the sides and red at the rear, according to EU regulations Ljdpfjyu Eu Isx Aicoab * 10 pairs of stanchion pockets for plug-in stanchions (ca. 100 x 50 mm) in the loading area outer frame * European reflective signs (red-yellow) at the rear of the trailer * Mount for a flashing beacon at the rear of the trailer * One rear mud flap * Manual and documentation on USB stick * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection for the pump * 4 wheel chocks with holder on the front wall * Rear axle steering front and rear, controllable via cable remote control with push buttons, including single-track monitoring (without installation in tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of stanchion pocket rails mounted crosswise in the loading area, for plug

Koşul: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings Laedpfjl Uxdkex Aicjb 30 mm thick hardwood flooring Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Koşul: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer Lasdpfotphtmox Aicsb 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Load gauge for axle load determination including load chart

Koşul: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: - Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front - Length x width approx. 7,550 mm x 2,740 mm - Mechanical locking of the extension Chassis: - Rear chassis with closed outer frame - Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear Laedpfx Ajh Hm Tzjiceb Axles, Suspension, and Tyres: - “PENDEL-AXLE”, all axles hydromechanically forced steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260" - Technical axle load 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres Accessories: - Detachable steel front wall, approx. 400 mm high - 4 wheel chocks - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks - Ramps can be placed over or between the hooks - Mounting points for steel loading ramps at the rear between the external beams of the gooseneck - One locking position approximately every 1,000 mm on the extension - 1 lashing ring each left and right on the front cross member - Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile - 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings - 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards - 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings - Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle - Central lubrication system with 2 pumps, brand BEKAMAX - Remote steering from front and rear, operable via cable remote control, with single-track control of axles - 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches - Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering - Folding extensions, approx. 230 mm per side - Loose widening boards, framed in steel - 4 warning panels approx. 423 x 423 mm - Radio remote control for remote steering operation - 3.5" kingpin - Anti-slip stickers on the left bevel of the gooseneck - Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings - Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide - 1 spare wheel with mounting adapter - Parking position on the gooseneck for warning panels when not in use - 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm - Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear - Trailer colour MB 7350 Novagrau

Koşul: yeni, azami yük ağırlığı: 49.000 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable Loading Platform: - Loading platform in extendable design with rear taper approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - c. 48 mm thick hardwood flooring, over the axles with checker plate covering Detachable Two-Part Ramps: - One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit and hydraulically adjustable - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles, two rigid axles, two steering trailing axles, air suspension, with drum brakes, with raise/lower function - The trailing steering axles can be locked electromagnetically via reverse gear or manually - Axle tools - Tyres: 235/75 R 17.5 Brake System: - Brake system according to EU regulations with EBS-E (4S3M) Steel Construction: - Steel construction made of high-tensile fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer Ljdeh Etf Rjpfx Aicjab - High-quality 2-component (2K) top coat finish in single-colour Novagrau Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets Accessories Included: - 2" king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings at the galvanized front terminal strip - 4 chocks with holder at the front wall - Mounting at the rear area of the gooseneck for ALU drive-on ramps - Galvanized folding supports under the taper of the loading platform - Bracket for a rotating beacon - Cover plates to bridge the gap between ramps and loading platform - White reflector tape to EU specification on the sides, red at rear and on extension - Electro-hydraulic power pack - On both sides of the gooseneck and ramps, mounting brackets for warning signs incl. socket outlet - Ramp control valves installed on the right trailer side - One mudguard at the rear of the trailer - Instruction manual and description on USB stick - ALU side walls and end wall, plug-in, on gooseneck approx. 2,440 x 400 mm - The rear galvanized plug-in posts are removable (length of structure approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, 2x 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Extensions, galvanized, extendable by approx. 230 mm per side - Lift axle on the front axle with control - Square climbing rails 20 x 20 mm - Central lubrication system BEKAMAX - F

Koşul: yeni, boş ağırlık: 9.600 kg, azami yük ağırlığı: 53.400 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.340 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, renk: gri, Donanım: ABS, Cargo area: - Cargo area with approx. 30 mm thick hardwood floor - 10 pairs of outward-folding lashing rings Landing legs: Lasdpfx Aiorq Dlfecsb - JOST landing gear with 2-speed gearbox for 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg, first axle fixed, all other axles hydraulically/mechanically forced-steered, mounted on a turntable - Air suspension with raise/lower valve - Axle tools - Tyres: 385/65 R22.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel construction made of high-strength fine grain steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrics: - Electrical system according to EU regulations, 24-volt lighting - ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets - Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer - High-quality single-colour 2-component top coat in Nova grey - Rear section metallized and painted in RAL 9010 Accessories included: - Cargo area with approx. 30 mm thick hardwood floor - 2" king pin - Galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized front connection strip - 4 wheel chocks with holder at the front wall - Holder for 1,000 mm posts in the rear central beam - At the gooseneck and the rear plate, holders for warning panels including socket, left and right - Remote steering from front and rear by cable remote control with push buttons, including single tracking control for the axles - Electro-hydraulic power unit - White reflective tape according to EU regulations on the sides of the trailer, red at the rear - 12 pairs of posts pockets for 100 x 50 mm plug-in stakes in the side frame of the cargo area - European reflector plates at the rear of the trailer - A holder for a revolving beacon at the rear of the trailer - A mudflap at the rear of the trailer - Manual and description on USB stick - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump - TPMS tyre pressure monitoring system: - The tractor unit must be capable of receiving and displaying this data in order for correct indication - Lift axle on the front axle controlled via TEBS E depending on current axle load and load condition - Radio remote control for remote steering in addition to cable remote, with indicator lights on the receiver for single tracking control - 5 pairs of crosswise stake pocket strips mounted in the cargo area for 100 x 50 mm plug-in stakes - 80 km/h speed stickers at rear and both sides - Adjustable access ladders mounted on the left and right sides in the direction of travel - 2 reversing lights mounted on the rear plate - Load gauge for axle loads including load diagram - HRM metallization of the side frame: complete steel frame shot-blasted, then the defined visible areas metallized with ZINACOR 850 (85% zinc – 15% aluminium) hot finished