Kullanılmış Fliegl 3-Achs Plateau Sds 420 Scandic Spezial satın al (39.283)

Koşul: ikinci el, makine/araç numarası: WFDFLT22001007597, boş ağırlık: 6.200 kg, azami yük ağırlığı: 11.800 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2018, yükleme alanı yüksekliği: 200 mm, toplam uzunluk: 11.600 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", renk: kırmızı, Further information Chassis: Steel welded construction, double-cranked with low-bed sections in front of and behind the axle assembly; low-bed sections are beveled for drive-in capability; turntable with heavy-duty ball race ring; foldable rear support; wheel chocks; side underrun protection; quarter shell mudguards. Lashing eyes: Over the front axle: 2 pairs of ring lashing eyes, each rated to 5 tons, at the cranked section. Low-bed/rear axle: 6 pairs of lashing eyes, each rated to 8 tons, located laterally in the low-bed section. 6 pairs of lashing eyes, each rated to 5 tons, positioned between the longitudinal beams. Pair of stake pockets recessed into the outer frame (internal dimension 70 x 40 mm), or, as an alternative to stake pockets, 5-ton ring lashing eyes recessed in the floor. Drawbar: Certified 40 mm towing eye. Axles: BPW drum brake axles. Braking system: 2-line compressed air braking system; spring-loaded parking brake; 2 non-interchangeable coupling heads at front. Electrics: 24V electrical system; multi-chamber lights; side marker lights in yellow; 2 white position lights at the front; 2 white/red outline marker lights at the rear; rotating beacon with bracket; pair of illuminated, extendable warning panels (extendable up to 3,000 mm); 2 x 7-pin non-interchangeable connectors at front. Floor: Front cranked section with steel/chequer plate covering; storage box integrated into the drive-on bevel to the cranked section; drive lane area and central area between the beams with steel/chequer plate covering; rear bevel with 70 mm softwood floor; low loader loading area including rear bevel: 5,900 mm. Credpfx Aoi Ri N Uegvjc Loading ramps: Hook-on bar for aluminium ramps across the full width, U-profile across the full width; pair of aluminium ramps, each 800 mm long and approx. 400 mm wide; load-bearing capacity per pair: 14,000 kg; ramp storage compartment between the beams. Approval: Contour marking with reflective strips according to ECE R 048; white at the sides and red at the rear.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902031174, boş ağırlık: 5.835 kg, azami yük ağırlığı: 29.165 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2023, yükleme alanı hacmi: 50 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: gri, The images are archive photos. The vehicle may still be in use. Chassis – Tipper Semi-Trailer Fine-grain steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" kingpin. Curved front wall "Patented" 24 t, two-speed landing gear, single-side operation, straight lower section, without load compensation. 2x wheel chocks with holders Aluminum side underrun protection Folding rear underrun protection 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface Tarp support bar with holder 2x tow hooks at rear Axles & Suspension BPW disc brake axles "Axle/chassis laser-aligned" for reduced tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, operated by triple brake application Brake System 2-line air pressure brake system Color-coded lines for easy servicing Spring-loaded parking brake 2 foolproof couplings at front, without connecting line EBS, Electronic Brake System with EBS socket at front, without connection cable Note: The trailer may only be towed by vehicles that can guarantee the effectiveness of ABS! With lifting & lowering valve Vehicle Stability Control System Wheels and Tyres 6x 385/65 R22.5" 6x steel rims Cedpfxsy Efcuj Agvorc Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white marker lights at front 2 white/red clearance lights at rear 2 x 7-pin and 1 x 15-pin foolproof sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box-type body made of high-quality, wear-resistant material. Sloped front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail. Inside fitted with access at the front wall. Shovel and broom holder on the outside of the front wall. Rear wall with pendulum mount, "double joint hinge," split 1/2 to 1/2 with two-wing door, top with swing-out support, each door with grain chute. Rear wall with rubber seal Continuous 6 mm floor Standing platform with access, connection plate for air/electricity and brake. Roll tarp stowable on the right-hand side, with central locking on the left-hand side. Operating Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to avoid corrosion damage. The specified gross weight is technically possible. Depending on the load type, the permissible axle/support/kingpin loads may restrict the achievable total weight. (Incorrect load distribution can cause poor handling and tracking.) Note: Not suitable for chemically aggressive materials (e.g., acids, chlorinated compounds, sulphur compounds, "refuse-derived fuels"). Such media, particularly on moist body surfaces, may lead to stress corrosion cracking and severe fractures in the body structure! Vehicles with tipper bodies are intended for non-aggressive loads. Use for transport of aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and domestic waste is at the owner's risk. This may result in stress crack or pitting corrosion damage. The images are archive photos!

Koşul: ikinci el, makine/araç numarası: WFDFLT33902030053, boş ağırlık: 5.835 kg, azami yük ağırlığı: 29.165 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.540 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: gri, The images shown are archive photos. The vehicle may still be in use. Chassis – Tipper Semi-Trailer Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front wall (patented) 24 t 2-speed landing gear, single-sided operation, with straight lower part, without load compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles, 430 mm disc diameter Axles/chassis laser-measured – reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and traction aid, operated via “3x braking” (traction aid operational up to 30% axle load exceedance and up to a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism Brake System 2-line compressed air brake system Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles ensuring effective ABS function! With raise & lower valve Vehicle stability system Wheels and Tyres 6x 385/65 R22.5" 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 x 7-pin non-interchangeable sockets at the front, without connecting cable. Electricity not fully functional. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling (fixed part), NW 48 mm. (without hose connection) Body Aluminium box-type body made of high-quality, abrasion-resistant material. Sloped front wall 5 mm thick, with external cylinder bracket. Side walls made of 30 mm hollow profiles, cleanly welded, with bulk-resistant top rail. Interior with access step at the front wall (not in combination with Cramaro cover). Shovel and broom holder on the outside of the front wall. Greenline – conical and aerodynamic body shape “Membrane” rear wall Rear wall suspended, double-joint hinge, divided 1/2 to 1/2 as double-leaf doors, top with swing boom, one grain chute per door. 6 mm continuous floor Standing platform with access. Connection plate for air/electricity and brakes with large clearance for optimal usability. Roll tarp stored on one side to FR-right, with central locking on FR-left Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to prevent material-induced corrosion and rusting. The specified total weight is technically feasible. Depending on the load material, the gross weight may not be achievable under observance of permitted axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, “refuse derived fuels”); such media can, especially with moisture, cause stress corrosion and severe cracking of the body! Crodpfey Edtfox Agvec Vehicles with loading bodies are intended for non-chemically aggressive cargos. Use for transporting aggressive substances (acids, alkalis, salts, fertilizers, sewage sludge, municipal waste) is at your own risk. This may result in stress cracking or pitting damage. The images shown are archive photos. The vehicle may still be in use.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802032235, boş ağırlık: 4.983 kg, azami yük ağırlığı: 33.017 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, süspansiyon: hava, lastik boyutu: 385/55 R22.5", renk: açık yeşil, Note: The images are archive photos! The vehicle may still be in use! Chassis for Container Semi-trailer Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with rear Locking positions in new design for improved fifth wheel load on 20 ft flush at rear Rear lighting system protected and integrated into the rear end Central telescopic beam, 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Central telescopic beam, 1st stage, rear extension extended 1st stage: 1 x 40 ft with gooseneck tunnel Central telescopic beam, 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Central telescopic beam, 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and beveled corners, central telescopic beam as an interlocking central tube frame with bolt locking Transport of filled tank containers is excluded. With rear height adjustment in galvanised version and folding central supports for containers without tunnel Detachable front container guides Front crossmember with latest Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-sided operation, straight base, without compensating stroke 2 wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Rear underrun protection extendable for 45 ft containers Rear splash guards, full width (not in combination with forklift holder) Half-shell mudguards With anti-spray splash guards according to EU regulations Rear impact protection Spare wheel holder for 1 wheel with fastening kit 1 toolbox for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder 6 kg) Codpsww Iczefx Agvorc

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902036248, boş ağırlık: 7.272 kg, azami yük ağırlığı: 27.728 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 92 m³, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", lastik durumu: 100 yüzde, Body color: Monochrome RAL tone freely selectable Chassis: Semi-trailer, forwarding specification Fine-grained steel welded construction in lightweight design down to the support legs, fifth-wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-side operation Extendable ladder at the rear Side door retainers Foldable splash guard for lighting unit Rear underrun protection 1 aluminum ladder approx. 3,550 mm, with side mount 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm Axles & Suspension: BPW disc brake axles, 430 mm disc diameter Air suspension, 1st axle with automatic lifting axle including forced lowering and starting aid, activation by "3x braking" Braking system: 2-line compressed air brake system Spring-loaded parking brake 2 tamper-proof coupling heads at the front 24 V EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by tractor units that ensure the ABS operates correctly! With lift/lowering valve Vehicle stability control system "RDKS" Tire pressure monitoring system per ECE R 141, display via tractor's dashboard using EBS 1 additional air connection on LH rear, with quick coupling Wheels and tires: 385/55 R22.5" – brand at manufacturer's discretion Steel rims, factory silver Electrics: 24 V, multi-chamber lights, side yellow LED illumination Side yellow LED lights with indicator connection (flashing side lights) 2 white LED position lights at the front 2 white/red track marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connection cables 2 additional LED work lights at the rear, switched via reverse gear SB Hydraulics: Hydraulic cylinder with sliding mechanism built into the floor. Dual-circuit hydraulics. Forward/reverse switchover electric, via cabled remote control Operation via lorry PTO Hydraulic connection with hose on front panel and HDK screw connector, NW = 48 mm SB Floor: Moving floor with wear plate at rear Aluminum floorboards, 8 mm profiled, grooved version SB Body: Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made from aluminum hollow profiles, all around at top with a wide, special reinforcement profile welded from aluminum; special welded subframe at bottom. Moving bulkhead for improved load discharge, reinforced tarpaulin strip at the bottom. Rear wall: aluminum hollow profile, double-door (1/2-1/2 split), all around framed with special U-profile with stop and rubber sealing, 2 external rotary catches, locked at top and bottom. Rear wall with mechanical safety lock, operated at rear, on left in direction of travel Standing platform with access ladders on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin 3 removable, swiveling cross bows for tarp support + tarp racks at front wall and rear wall Paintwork: Frame: DB 7350 Nova Grey Cedpoza S E Refx Agvjrc "10-year warranty against rust-through" Support legs: Black coated Body: Natural aluminum – can be painted in customer RAL color of choice Roll tarp: Not yet installed.

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202034509, boş ağırlık: 4.790 kg, azami yük ağırlığı: 33.210 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 12.660 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.150 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", lastik durumu: 100 yüzde, renk: kırmızı, 3-axle container semi-trailer Gooseneck Type SDS 420 Rigid 40" Chassis Semi-Trailer Container Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin and 2 king pin positions Container equipment: 1 x 20ft centrally, without steel/checker plate cover in rear area 2 x 20ft, 1 x 40ft with gooseneck tunnel Front cross member with folding locks (not available for front extension), supplied free of charge Transport of filled tank containers is excluded. No height adjustment at the rear and no foldable centre supports, transport of containers without tunnel not possible. 24t, 2-speed landing gear, single-sided operation, with half-round lower section for thrust compensation, make: Jost 2 wheel chocks with holder Side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps as per EC Rear impact bumper Axles & Suspension BPW drum brake axles "Axle/chassis laser alignment" to reduce tyre wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Brake system 2-line compressed air brake system Coloured lines for easy servicing Spring-actuated parking brake 2 foolproof coupling heads at front, without connecting line EBS make Haldex, electronic braking system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability system Axle load detection via EBS CAN-bus signal for display in the driver’s cab; truck must be prepared accordingly, no installation on trucks (not a calibrated scale) Wheels and Tyres 385/55 R22.5", make Fulda, with M+S marking Credpezazznjfx Agvsc Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cable 2 additional LED work lights at the rear, on both sides, switched via reverse light Operating notes Attention: Transport of filled tank containers excluded! Country of registration/Plates Germany With Dekra inspection and report (according to §13 EC - FGV) Prepared for single-line number plate holder Warning sign as per ECE-70 ADR warning sign at rear, foldable Contour marking with reflective tape according to ECE R 048, yellow on the sides and red at the rear Paintwork Frame: RAL 3020 Traffic Red "10-year warranty against rust-through" Landing legs: Black coated

Koşul: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- More data at: ! Crodpfx Asy Stthsgvec More details: !

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2011, toplam uzunluk: 12.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.300 mm, süspansiyon: hava, lastik boyutu: 385/55R22,5, dingil mesafesi: 9.250 mm, renk: diğer, Üretim yılı: 2011, = Additional Options and Equipment = - EBS = Notes = Number of axles: 3, Payload: 36,200 kg, Unladen weight: 5,800 kg, Gross weight: 42,000 kg, Chassis type: Complete chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2X 20, 1X 30, 1X 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further Information = General information Cab: Day cab Registration number: OL-43-HP Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre size: 385/55R22.5; Lift axle; Tread left: 5 mm; Tread right: 10 mm Axle 2: Tyre size: 385/55R22.5; Tread left: 8 mm; Tread right: 10 mm Axle 3: Tyre size: 385/65R22.5; Tread left: 2 mm; Tread right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg Gross vehicle weight: 42,000 kg Environment Emission class: Euro 0 Condition General condition: very poor Technical condition: very poor Visual condition: very poor Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Easy! • Large, rapidly changing stock • Recognizable quality • Good prices • Proper business conduct Csdjy U U R Hjpfx Agverc • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Professional technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and the full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Koşul: ikinci el, azami yük ağırlığı: 30.400 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2019, yükleme alanı hacmi: 25 m³, Donanım: ABS, * 4956 - Vehicle ID for telephone inquiries * ABS, SAF axles, disc brakes, air suspension with lift/lower function, lift axle, drop-legs, foldable underrun protection, sliding tarp, aluminum rims, platform, tipping deployment * Tires 1st axle: 385/65R22.5 ( 4 / 2 mm ) * Tires 2nd axle: 385/65R22.5 ( 2 / 2 mm ) * Tires 3rd axle: 385/65R22.5 ( 4 / 9 mm ) ----Our email address:     Our service for you:       - Procurement of temporary or export license plates       - Delivery / transportation within the EU       - Customs clearance for vehicles exported to non-EU countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * Whatsapp for English, German and other languages: Cedpfxsy U S Sno Agvsrc

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902030381, boş ağırlık: 5.960 kg, azami yük ağırlığı: 29.040 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2022, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: siyah, The images are archive photos; the vehicle may still be in use! Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, slightly sloped outer frame featuring "Load-Lock profile" for securing straps, 24-ton capacity. Two-speed landing gear, operated from one side, with straight lower section, without sliding compensation. Note: Free landing gear corner dimension or free rear swing radius approximately 1930 mm without supports. Rear pull-out ladder, side-mounted door retainers, pallet box for 32 Euro pallets (extended version), ground clearance approx. 300 mm. Rear underrun protection, "Blocker": transverse galvanized steel angle serves as forklift and door hinge protection, double-sided pallet stop approx. 15–20 mm high, bolted version; loading height reduced by approx. 15–20 mm. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axles/chassis laser-measured" to reduce tire wear and fuel consumption. Air suspension, no lift axle. Brake System: Two-line compressed air brake system with color-coded piping for easier servicing. Spring-loaded parking brake. Two non-interchangeable coupling heads at the front, no connecting line. EBS (Haldex), electronic braking system with EBS socket at the front, no connection cable, with raise & lower valve. Vehicle stability control system, brake lining wear indicator via EBS-Canbus signal (for display in truck cab, truck must be pre-equipped), axle load monitoring via EBS-Canbus signal (for display in cab, truck must be pre-equipped, no truck installation/no certified scale). TPMS (Haldex) tire pressure monitoring system via EBS, no truck installation (truck must be equipped accordingly). Electrics: 24V, multi-chamber LED lights with resistors, yellow LED side marker lights, LED license plate lighting. Two white position lights at the front, two white/red lane lights at the rear, one 15-pin plug at the front, no connecting cable. Additional LED work light at the rear, controlled by reverse gear. Floor: Screen-printed plywood, approx. 30 mm thick, on longitudinal supports for high point load bearing, suitable for forklift axle loads up to 7100 kg. Bodywork Mounted body Front wall / front corner posts: 2,580 mm high, steel corner posts in high-volume design, release mechanism for side curtain at headboard, "crash blocker", inner base approx. 140 mm high with steel impact protection. Center posts: two pairs of sliding posts, adjustable throughout the length, with four double insert pockets and long lower pocket; two pair of post positions. Insert slats: 5 rows of aluminum V-insert slats. Crsdpfoy Tvwxox Agvjc Rear wall/rear corner posts: steel rear corner posts up to lower roof edge, curtain attachment with round tube and ratchet tensioners. Rear portal doors, double-leafed, each with two internal turn bar locks. Curtain: Curtain with welded-in horizontal and vertical straps, stainless steel tension fasteners. Roof: Sliding canopy, rear end-liftable, moveable from rear to front; L-roof rail for automotive industry. Internal width between roof rails approx. 2,490 mm; curtain color: white. Non-elastic roof with minimal sag during loading/unloading. Anti-ice system with single central hose and automatic forced ventilation via brake light. Optimal rear rain gutter above doors on final bow.

Koşul: ikinci el, azami yük ağırlığı: 31.410 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2020, Donanım: ABS, Acil ve kısa sürede teslim edilebilen tüm araç stoklarımızı web sitemizde bulabilirsiniz. Donanımdan bir alıntı. Tam donanım listesi talep üzerine sunulur. - 3 x SAF aks - Disk frenler Codpfew Tpr Uex Agvsrc - 1. aks otomatik kaldırma aksı - Havalı süspansiyon - 24 t, 2 kademeli destek ayağı, tek taraflı kumanda - Arkada uzatılabilir merdiven - Plastik alet kutusu, çekmeceli ve raflı - 2 hatlı basınçlı hava fren sistemi, EBS/ABS - Lastikler 385/55 R22.5 - Kayar taban Cargo Floor, yaklaşık 10 mm taban profili - Alüminyum boş profillerden arka kapak, çift kanatlı kapı - LED çalışma farları - Şasi rengi DB 7350 Novagrau - Kasa rengi RAL 7035 açık gri - Rulo brandası RAL 3002 karmen kırmızıya yakın

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902037031, boş ağırlık: 4.795 kg, azami yük ağırlığı: 30.320 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.040 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: gri, These images are sample archive photos! Vehicle may still be in operation! Fine-grained steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin, Curved front wall – patented 24-ton 2-speed landing gear, operable from one side, with semi-circular lower part and straight mounting plate, with load compensation Wheel chocks with holder Foldable underrun protection Semi-shell mudguards Integrated 'mudguard bracket', stone-repellent surface With anti-spray splash guards only on the last axle Tarpaulin rod with holder Tow hook at the rear (not with Revolution) Axles & Suspension SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser-aligned' – reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation ``3x braking'' (starting aid works up to 30% axle overload and at speeds up to max. 25 km/h) 'Hot dip galvanized lift axle mechanism' Braking System 2-line compressed air braking system Color-coded line arrangement for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting lines 24 Volt EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles that ensure ABS effectiveness! With lift & lowering valve Cjdpfxsy Rrple Agvjrc Vehicle stability system Automatic tipping lowering with shut-off valve 'TPMS' Tire Pressure Monitoring System, display via monitor in towing vehicle, via EBS, not installed in the truck (requirement must be present in the truck. Only for standard tires) Wheels and Tires 385/65 R22.5 Steel rims Electrics 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED (Note! Certain towing vehicles may show error messages, even though the lighting functions correctly) Side yellow LEDs integrated with indicators ('flashing side markers') 2 front white position lights in LED 2 rear white/red lane markers in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Additional LED work light integrated in the rear, switched via reverse light Hydraulics Low-pressure cylinder max. 170 bar Operated hydraulically via truck PTO Tipping Body Aluminum box-type tipper body made from high-quality, wear-resistant material Sloping front wall, 5 mm thick, with external cylinder mount Side walls made from 30 mm hollow chamber profiles, cleanly welded, with top rail profile designed to repel bulk material. Interior with climb assist at the front wall (not in conjunction with Cramaro cover) Shovel and broom holder on the outside at the front wall Greenline – conical and aerodynamic tipper body design 'Membrane' rear wall Rear wall as swing tailgate with 'double-hinge', externally mounted with double hook lock Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, mounting plate for air/electrics and brakes, with ample free space for best possible operability Roll tarp, stowable on passenger side, with central locking on driver’s side Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent damage and rust caused by materials.

Koşul: ikinci el, makine/araç numarası: WFDFLT33902030059, boş ağırlık: 7.452 kg, azami yük ağırlığı: 27.548 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 92 m³, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", renk: siyah, The images are archive pictures; the vehicle may still be in use! Weights and Dimensions: Gross weight, permitted / technical: 35,000 / 39,000 kg Payload, permitted / technical approx.: 27,548 / 31,548 kg Aggregate weight, permitted / technical: 24,000 / 27,000 kg Permitted / technical kingpin load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner measurement approx.: 2,040 mm Chassis Semi-trailer Freight Forwarder Fine-grain steel welded lightweight construction up to the landing legs, fifth wheel plate with replaceable 2'' kingpin Lashing point preparations integrated in the floor (up to 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, without compensating adjustment Extendable ladder at rear Side door holders Wheel chocks with brackets Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable protective cover for lighting unit Quarter-shell mudguards Rear collision protection Axles + Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activated by braking three times Brake System 2-line compressed air brake system Color-coded pipe routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump output: Capacity: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l SB Tipper Body Crodpswk Dc Refx Agvoc Aluminium box body made from high-quality, wear-resistant material. Front and side walls made of aluminium hollow profiles, all around the top welded with a wide special reinforcement profile made of aluminium, welded to a special frame at the bottom. Moving side wall for better unloading of the load, with reinforced curtain flaps at the bottom. Rear wall made of aluminium hollow profiles, double-wing door split 1/2 to 1/2, all around edged with a special U-profile with stop and rubber sealing, with 2 external rotary bar locks, locked above and below. Rear wall with mechanical safety lock, operated at the rear on the left in direction of travel. With swivelling crossbar at the top. Work platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin Removable and swiveling crossbars for tarp support + tarp support at the front bulkhead and at the rear on the back wall, Roll-out tarpaulin stored on one side with 2 longitudinal tensioning straps, 3 ratchet straps at the side, at the front bulkhead and over the rear doors the tarpauli

Koşul: ikinci el, boş ağırlık: 5.905 kg, azami yük ağırlığı: 33.095 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2024, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.800 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, Üretim yılı: 2024, Donanım: ABS, Alman aracı Neredeyse yeni, sadece yaklaşık 30.000 km. İlk tescil: 06.05.2024 Fliegl SDS 390 Roadrunner Azami toplam ağırlık: 39.000 kg Boş ağırlık: 5.905 kg Net taşıma kapasitesi: 33.095 kg BPW akslar I-Lock Blitz tente Crsdpfx Aeynkikegvec Lastik ölçüsü: 385/65 R 22,5 Branda yazılı, fotoğraflar rötuşlanmıştır Ek hizmetler mümkün! İhracat plakası (Kırmızı / 30 gün) Almanya Kısa süreli plaka (Sarı / 5 gün) Almanya Avusturya sevkiyat plakaları temin edilebilir Araç teslimatı (ücrete tabidir) İnternette verilen bilgiler bağlayıcı olmayan açıklamalardır ve garanti edilmiş özellikler değildir. Satıcı, yanlışlıklar, yazım hataları veya veri iletim hatalarından sorumlu değildir. Ara satış hakkı saklıdır. Satış sadece ticari müşterilere yöneliktir. Yalnızca genel satış şartlarımız geçerlidir.

Koşul: ikinci el, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis tare weight: 3,640 kg High-Cube container tare weight: 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with traction aid Credpovzk Naofx Agvoc Equipped with vehicle driving stability system Axle load detection 6x 385/55 R 22.5 tyres 40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 cbm Fits 25 Euro pallets Accessible with pallet truck and forklift Condition: A1 RENTING is the new BUYING – also available from us as full-service rental.

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902027997, boş ağırlık: 6.832 kg, azami yük ağırlığı: 28.168 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2021, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: siyah, The images are archival photos; the vehicle may still be in use. Equipment details available on request. Crjdpfx Aswk Dg Nsgvjc

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902024321, boş ağırlık: 5.765 kg, azami yük ağırlığı: 29.235 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", renk: siyah, The images are archive photos; the vehicle may still be in use! Csdpewk Dk Ijfx Agvsrc Specifications available upon request!

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net Low-bed trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear support 2 wheel chocks with holders Full-width rear mudflap (not with forklift mounting) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper) Lashing points low-loader: 1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t 7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t: 1x front on cranking 5x in the lowered bed 1x in rear taper 12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks): 5x cranking, 6x lowered bed, 1x rear taper Drawbar arrangement for turntable trailer: Drawbar with certified 40mm towing eye Drawbar height adjustable via spring Axles and suspension: Drum brake axles, manufacturer’s choice Laser-aligned axle/chassis: reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator) Wheels and tyres: 235/75 R17.5” (manufacturer’s choice) Steel twin rims, factory silver Braking system: 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended without ABS, with mechanical ALB, thus max. 60 km/h approval Electrics: 12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors 2 white position lights front 2 white/red contour marker lights rear 1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended 1 LED beacon with bracket, controlled via sidelight (removable) 2 pairs of illuminated warning boards, extendable to 3,000mm Floor: Front cranking with steel/chequer plate covering Storage box recessed in the transition to cranking Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering Rear taper with 70mm softwood floor Low-bed area incl. rear taper 5900mm Access ramps: Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable Wooden planked (tip area with steel/chequer plate) Hydraulic via tractor auxiliary drive with throttle, operated on LH side Hydraulic connection with SVK plug NW 10/3, including hose Operating instructions: Codpfx Aoynvrwsgvorc With 10,000kg axle load, special permit required; only indivisible load possible! The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution) Country of registration / Plates: Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (Registration in Switzerland max. 40 km/h possible) Prepared for two-line registration plate holder Without contour markings / reflective strips according to ECE R 048 Paint finish: Frame hot-dip galvanised incl. passivation “15-year warranty against thr

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Chassis: low-bed trailer Steel welded construction Turntable with robust ball bearing race Foldable rear supports Wheel chocks with holder Full-width rear mudflaps 1 plastic toolbox Prepared for extensions to 3,000mm (holes in outer frame with covers, not in the rear taper) Tie-down eyes for low-bed 1 pair of lashing slots embedded in the front longitudinal member with cranking, each 10t 7 pairs of lashing pins, recessed in the top and sides of the outer frame, each 10t 1x at the front in the cranked area 5x in the low-bed 1x in the rear taper 12 pairs of lashing holes in the outer frame, each 5t (for tie-down straps) 5x cranked area, 6x low-bed, 1x rear taper Drawbar configuration – turntable trailer Drawbar with tested 40mm towing eye Drawbar height adjustable via spring Axles & suspension Drum brake axles (manufacturer’s choice) "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and tires 235/75 R 17.5" Manufacturer’s choice Steel rims, twin configuration, factory silver Braking system 2-line air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Connection lines extended by approx. 60cm Without ABS, but with mechanical load-sensing valve; maximum approval for 60km/h Electrics 12 Volt, multi-chamber taillights, no side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red lane marker lights at rear 1x 7-pin 12V plug at front, with connection cable extended by approx. 60cm 1 LED beacon with holder, switched via parking lights (removable lamp) 2 pairs of warning boards, double, LED illuminated and extendable to 3,000mm Floor Cranked front area with steel/tread plate covering Storage box recessed in the drive-over slope towards the cranked section Then 70mm softwood floor, with steel/tread plate covering in wheel arch areas Rear taper with 70mm softwood floor Low-bed loading area incl. rear taper: 5,900mm Csdjwlmr Depfx Agvsrc Ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Wood-covered (tip area with steel/tread plate) Hydraulically operated, via tractor auxiliary drive with restrictor, controlled from left front side Hydraulic connection with SVK coupling NW 10/3, incl. connecting hose Operating instructions For axle loads of 10,000kg, a special permit is required; only indivisible loads permitted! The specified total weight is technically possible, but depending on the cargo, the admissible total weight may not be achieved while observing permissible axle, support, and saddle loads (poor driving or tracking may result from incorrect load distribution). Country of registration / registration plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle LoF (With Swiss registration, max. 40 km/h approval possible) Prepared for two-line license plate holder No contour marking / reflective strips according to ECE R 048 Paintwork Frame: RAL 7021 black grey "10-year anti-corrosion warranty" Drawbar: galvanized Ramps: hot-dip galvanize

Koşul: yeni, azami yük ağırlığı: 8.665 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 910 mm, toplam genişlik: 2.550 mm, NEW VEHICLE Fliegl Tandem Timber Transport Trailer with Stanchions, Type TPS 118 Holz Total weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Loading length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Additional Information + Pre-transport / provision from logistics location 26639 Wiesmoor €1,280.00 / net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grained steel welded construction Outer frame slightly angled with 'Load-Lock Profile' for securing lashing straps Gear support foot at the front Foldable rear support 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Open compartment for stanchions under the loading area 4 pairs of stanchion pockets recessed in the external frame, 83 x 83 mm internal dimensions 4 stanchion pockets centrally recessed in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of removable stanchions W=80 / D=80 / L=2,000 mm, hot-dip galvanized Note: Stanchion sockets/inset stanchions are not designed for the sole load securing of long materials, pipes, etc., without lashing Aluminum side underrun protection Tandem trailer tow bar assembly Drawbar with certified 40 mm towing eye Drawbar length mechanically adjustable by 4 x 500 mm increments from 1,800 - 3,800 mm, set at 1,800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA or BPW axles, manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/Running gear laser-measured" for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalization) Wheels and Tires 235 / 75 R 17.5" Steel rims, factory silver Braking System 2-line air brake system Spring-loaded parking brake Integrated air tank 2 fool-proof coupling heads at the front, with connecting hoses to the truck, ABS and ALB, ABS socket at the front, with connecting cable Attention: The trailer must only be towed by towing vehicles guaranteeing full ABS functionality! Electrics 24 Volt, multi-chamber LED rear lights, yellow LED side marker lights, LED number plate lighting (Note: depending on towing vehicle, possible diagnostic errors may occur despite full functionality) 2 white position lights at the front (LED) 2 white/red lane lights at the rear (LED) 2 x 7-pin fool-proof plugs at the front with connecting cables Floor Phenolic plywood approx. 30 mm thick for high point-load capacity Note: Floor deformation due to weather influences possible! Platform length approx. 6,200 mm Operating Instructions The stated total weight is technically possible; depending on cargo, the total weight might not be achievable within permissible axle, support, and fifth-wheel loads. Special permit required if the overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. Registration / Plates Registration country: Germany With Dekra inspection and certificate 24/7-Service hotline Prepared for single-line number plate holder Contour markings with reflective strips per ECE R 048, white on sides, red at rear Paintwork Chassis hot-dip galvanized incl. passivation "15-year warranty against rust-through" Note: Floor warping due to galvanizing possible! Vehicle is from ongoing production – delivery time approx. 2–3 weeks. Cedpsw N U I Hefx Agvjrc

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly tapered with 'Load-Lock profile' for attaching tie-down straps 24 t 2-speed landing gear, single-sided operation Aluminum side underrun protection Galvanized steel rear underrun guard Quarter shell mudguards in front of and behind the axle assembly With anti-spray mud flaps according to EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fastener kit Cedperi Hihjfx Agvjrc Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser alignment" reduces tire wear and fuel consumption 1st axle with automatic lift, additionally electronically controllable from the truck cab Includes forced lowering and start aid, no truck installation required Brake System 2-line compressed air brake system Spring-loaded parking brake Wabco EBS electronic braking system with EBS socket at the front, without connection cable With lift & lower valve plus auto-reset function Vehicle stability control system Axle load detection via EBS can-bus signal, output to display Wheels and Tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red track marker lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable-proof sockets at the front, no connection cable 2 additional LED work lights at the rear, switched via reverse gear Floor Approx. 30 mm phenolic plywood floor, on longitudinal cross-members for high point load resistance, suitable for forklift axle loads up to 7100 kg at the front wall Stakes 5 rows of aluminum V-stakes 2 pairs of Vario steel stakes, in combination with Vario beams for forward and backward load securing; the aluminum stakes are omitted in the area of the steel stakes Rear portal doors, double-leaf with 2 internal rod locks each Tarpaulin with welded horizontal and vertical straps Unladen weight: 5,960 kg Offer and images non-binding

Koşul: yeni, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam genişlik: 2.550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000 kg / 39,000 kg Unladen weight: 5,500 kg!!! Payload: 29,500 kg / 33,500 kg Overall length: 8,600 mm Volume: 25 cbm Credpsvhyf Refx Agvec Further information: - Overall height approx. 3,160 mm - Internal width approx. 2,350 mm - Fifth wheel height approx. 1,200 mm Chassis for tipping semi-trailer: - Fine-grain steel welded construction, basic lightweight design - 1 central landing leg - Folding underrun protection - Underrun protection with 'spring assistance' for easier operation - Half-shell mudguards - Integrated 'mudguard bracket', stone-repellent surface - Antispray mudflaps only on rearmost axle - 2 towing eyes at the rear Axles and Suspension: - SAF disc brake axles with 430 mm disc diameter - 'Axles/chassis laser alignment' to reduce tire wear and fuel consumption - Axles in off-road specification - Air suspension - Air spring pressure gauge mounted at front on curved chassis - 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, without truck installation (starting aid operates up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Braking System: - 2-line compressed air brake system, color-coded piping for easy servicing - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting lines - 24-volt EBS electronic braking system with EBS socket at front, no connecting cable - With lift and lower valve - Vehicle stability control system - Automatic tipper lowering with shut-off valve Wheels and Tires: - 6 x 385/65 R22.5", European brand, manufacturer’s choice Electrics: - 24-volt, multi-chamber lights in LED, amber side LED lighting, license plate LED lighting (Note: certain towing vehicles may display diagnostic errors despite proper function) - Amber side LED lighting linked with the indicator, 'flashing side marker lamps' - Premium LED side marker lamps, each with 20 LED diodes - 2 white front position lamps (LED) included - 2 rear white/red lane marker lamps (LED) included - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cables - Side LED work lights, both sides (switched via reverse light) - 2 additional LED work lights recessed at the rear Hydraulics: - High-pressure cylinder, max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm - Brand: Hyva - Hydraulic operation via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round body in 'Stone Master Design' made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Integrated access at the front wall. - Greenline – conical and aerodynamic body shape - Shovel and broom holder on external front wall - 'Membrane' rear wall - Rear wall as pendulum tailgate with 'double-joint hinge', external mounting with double hook locking. 2 clamping screws with toggle fasteners at lower sides - Rear wall with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous 4 mm side walls, 4/5 mm floor, wear and weight-optimized design - Fliegl S.T.E.P. – swiveling front standing platform with foldable access ladder for side entry on front-left

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production Total weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information: - Steel welded construction - Turntable with robust slewing ring - Folding rear support - Chocks with holder - Aluminium side underrun protection - Full-width rear mudflap (not in combination with forklift bracket) - Half-shell mudguards on 1st axle with anti-spray mudflaps - Anti-spray mudflaps behind 2nd and 3rd axles - Plastic toolbox - Extendable width to 3,000mm - Central storage compartment for wooden planks on the loading area - 70mm wooden planks for extension to 3,000mm - Lashing eyes low bed - 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons - 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps) - 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons - 1x on the gooseneck, 6x in the low bed - Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets) - Additional pair of folding lashing eyes, each rated at 10 tons - 1x on the gooseneck - 1x recessed in the floor behind the last axle Towing device/trailer turntable: - Drawbar with certified 40mm eye - Drawbar height adjustable by spring Axles & suspension: - Drum brake axles, manufacturer’s choice - "Laser-measured axles/chassis": reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels & tyres: - 235/75 R 17.5'' - Manufacturer’s choice - Twin steel rims, factory silver Braking system: - Two-line air braking system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle - 24V ABS and ALB, with ABS plug at the front, incl. cable Electrics: - 24V, multi-chamber lights, yellow LED side lighting - 2 white position lights at the front - 2 white/red clearance marker lights at the rear - 2x 7-pin non-interchangeable plugs at the front, with cable - LED beacon with bracket, operated via parking lights (removable beacon) - Pair of warning boards double LED-lit and extendable to 3,000mm Floor: - Gooseneck front with steel / checker plate covering - Storage compartment recessed in the transition slope to the gooseneck - Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas - Rear bevel with 70mm softwood floor - Low bed area including rear bevel 6,500mm Access ramps: - Steel ramps, 2,800mm long, 750mm wide, laterally adjustable - Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting) - Wood covered (tip portion with steel/checker plate) - Hydraulic via tractor PTO with throttle, operation at left front side - Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Cedeuytx Sjpfx Agvjrc Painting: - Frame hot-dip galvanized incl. passivation - Ramps hot-dip galvanized Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net

Koşul: yeni, azami yük ağırlığı: 25.050 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Gross weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Total length: 21,000 mm Loading length: loading area inside approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Further information: Brand new vehicle from current production, available from approx. calendar week 8/2026 Csdpfxoumha Ne Agvorc Rear support telescopic 4 wheel chocks with holder 4 pairs of recessed container locks in the floor for 1x 40 ft. container or 2x 20 ft. containers 1 spare wheel holder for 1 spare wheel, with wheel fixing kit, basket design 11 pairs of stake pockets integrated into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with slot for lashing belt or chain hooks 20 plug-in stakes, W=80/T=50/L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each 3.5 t, integrated into the side frame - neck area 13 pairs of folding lashing rings, each 10,000 daN, freely swiveling in the side frame profile (also suitable for oversize lashing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raise and lower function 1st axle automatic lift axle, additionally with forced lowering including traction aid, operated by control button on the semi-trailer, no cabin actuation with raise & lower valve and auto-reset function Wheels and tires: 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 volt, multi-chamber rear lights, side marker LEDs in yellow 2 white LED position lights front 2 white/red LED lane departure lamps rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at front, without connecting cable 2 additional LED work lights at rear, switched via reversing light 1 removable beacon mounted on underrun protection 1 x 7-pin socket at rear 6 side sockets, 2x front wall, 2x support legs, 2x rear (left + right), 7-pin 2 work lights, flush-mounted at top of front wall, including switch 2 pairs of oversize signs, each with 2 LED clearance lights per sign, extendable sideways to 3,500 mm, signs additionally attachable to loading area (width adjustable steplessly) Fixed steel front wall, 1,200 mm high, with robust steel corner posts without corner bevel, straight on the sides 2 lashing holes, top inside and outside, in the front wall corners Frame front hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Frame rear hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Front wall in RAL 3002 carmine red

Koşul: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle completely hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck Width: 2,520 mm Loading height: 860 mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40% Monthly rate: €569.00 Steel welded construction Turntable with heavy-duty ball bearing ring Foldable rear support Chocks with bracket Aluminum side underrun protection Full-width rear spray flaps (not in combination with forklift holder) Half-shell mudguards on the 1st axle with anti-spray flaps Anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width up to 3,000 mm (not in the rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Tiedown points low-loader 1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t 4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks) 7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t 1 at the front on the step deck 6 in the low-bed recessed deck First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional foldable lashing eyes, each 10 t 1 on the step deck (protruding) 1 recessed in the floor behind the last axle Drawbar/trailer running gear Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Laser-measured axles/running gear" for reduced tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235 / 75 R 17.5" tires, manufacturer’s choice Twinned steel rims, factory silver Braking system Two-line air brake system Spring-loaded parking brake Vehicle stability system Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale) 2 foolproof coupling heads at front, with connecting lines to tractor unit 24 V EBS, electronic braking system with EBS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin foolproof connectors at front, with connecting cable 1 LED beacon with bracket, controlled via position light (removable beacon) 2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm Floor Front step deck with steel/chequer plate surface Cedov D T R Eopfx Agvorc Storage compartment recessed in transition to step deck Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide,