Kullanılmış Fliegl Sds 470 T Satteltieflader Mit Rampen satın al (55.574)

Koşul: yeni, boş ağırlık: 6.650 kg, azami yük ağırlığı: 17.350 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,650 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - steel welded construction - turntable with heavy-duty ball-bearing slewing ring - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel fastening kit - without spare wheel, - 1 plastic toolbox with shelf, dimensions 620mm x 360mm x 440mm (W/H/D), lockable with padlock - extendable side extensions up to 3,000 mm wide (not in the rear incline) - storage compartment for wooden planks underneath the low-bed area - 70 mm wooden planks for width extension to 3,000 mm - 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated at 5 t - 7 pairs of lashing mushroom anchors recessed at the top and side of the outer frame, each with a 10 t rating (1 x at the front on the gooseneck, 6 x in the low-bed area) - 5 pairs of stake pockets recessed in the outer frame, 70x40 mm internally - 2 additional pairs of folding lashing eyes, each rated at 10 t, 1x at the front on the gooseneck, 1x behind the 3rd axle - drawbar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) - 235/75 R17.5 - twin steel rims, factory silver - dual-line compressed air braking system - spring-loaded parking brake, ABS and ALB, with front connector, with connection cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin interlock-protected plugs at the front, with connection cable - 1 LED beacon with holder, switched via parking lights (removable beacon) - 2 pairs of warning panels with dual LED illumination, extendable to 3,000 mm - gooseneck front section with steel/chequer plate covering - storage box recessed into the transition incline to the gooseneck - thereafter with 70 mm softwood floor, in wheel arch area with steel/chequer plate covering - rear incline with 70 mm softwood floor - low-bed platform including rear incline: 6,500 mm - steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, surfaced with wood - additional ramp securing Isdpfsyxh Rzjx Ab Teib

Koşul: yeni, dingil konfigürasyonu: 3 dingil, renk: gri-siyah, vites türü: mekanik, Color natural, lift axle, electronic braking system (EBS), 1x 15-pin connector, features: outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment, 13 additional pairs of lashing rings in the outer frame, each rated at 5 to 24 tons. 2-speed landing gear, single-sided operation, with half-round lower section and straight steel forklift collision guard on outer frame (side and rear). 1 spare wheel holder for 1 single tire, including wheel fastening kit. 1 plastic toolbox (650mm x 520mm x 670mm). 7 pairs of stake pockets recessed into the outer frame, 83 x 83 mm. SAF disc brake axles with 430 mm air suspension. First axle as automatic lift axle, including forced lowering function and starting aid, operated by 3x brakes. Wheels and tires: 6 x 385/65 R22.5, manufacturer: 6 steel rims, factory silver. Floor made from ca. 30 mm film-coated plywood panels, cross joints with omega inserts for high point loading capacity, suitable for forklift axle load up to max. 7,100 kg. Front bulkhead/corner stanchions made from 25 mm aluminum hollow profile, 1,950 mm high, corner stanchions in high-volume steel version + 2 additional center supports ("crash-blockers"), bottom inside at approx. 140 mm height. Side walls: 25 mm aluminum hollow profile, 700 mm high. Frame painted: hot-dip galvanized incl. passivation ("15 years anti-corrosion warranty"). Side walls: aluminum anodized. Errors and changes excepted. Iedpfx Abjtcwmis Teib

Koşul: ikinci el, azami yük ağırlığı: 30.290 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2021, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.755 mm, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Sürgülü taban +/- 92 m³, arka çift kanatlı kapı ve çubuk mandallı kilit, üstyapı önünde tırmanma ve durma platformu, branda, 21 tahta 10 mm olan "Cargo Floor" döşeme, tam boşaltma (hareketli ön duvar), itmeli-çekmeli fonksiyon, yükleme manometresi, katlanabilir arka lamba koruması, kablolu uzaktan kumanda, ABS, EBS, SAF INTRA aks/akslar, disk fren sistemi, kaldırma ve alçaltma özellikli havalı süspansiyon, kaldırılabilir aks, destek ayakları, 1x takım sandığı, yedek lastik tutucu, araç reklamla kaplanmış ve/veya yazılı olabilir. SI84502 Teklifimiz genel olarak yeni TÜV muayenesi olmadan sunulmaktadır. Yeni TÜV muayenesi istenirse iş ortaklarımızdan teklif sunabiliriz! Araç reklamla kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Iisdewfvqvspfx Ab Tsb Bu ürün için finansman veya leasing teklifi hazırlamaktan memnuniyet duyarız. Lütfen bizimle iletişime geçin!

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902027826, boş ağırlık: 6.590 kg, azami yük ağırlığı: 28.410 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 02/2021, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 15.020 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.810 mm, toplam uzunluk: 15.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 60 yüzde, renk: kırmızı, römork freni: frenli römork, Üretim yılı: 2021, Donanım: ABS, For sale is a FLIEGL SDS 390 X-TRA LONG curtainsider trailer. The trailer is equipped with a large and a small pallet storage box, Alcoa aluminum rims, work lights, fire extinguisher boxes, and an air pipe system for roof de-icing. The trailer is in excellent technical and visual condition. The vehicle has low mileage and is in very good condition! Specifications: - First registration: 01.02.2021 - VIN: WFDFLT33902027826 - Main inspection (HU): 02/2027 - Safety inspection (SP): 08/2026 - 1st axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - 2nd axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - 3rd axle tires: 385/65R22.5, tread depth approx. 60%, suspension: air - Frame galvanized and painted - Portal doors - Alcoa Dura-Bright aluminum rims - AIR PIPE to prevent ice formation - Work lights - Mud flaps - Pallet storage boxes - Fire extinguisher box - Load securing tarpaulin Iiodpfx Abeyqxkhe Tob Offer is subject to change; input errors, changes, mistakes, as well as prior sale reserved. Financing available on request. We are happy to organize customs clearance for you as well. Opening hours: Mon.-Fri. 8:00–16:00 or by appointment Price is NET / negotiable basis. An invoice with indicated VAT will be issued upon sale. Vehicle location: Im Gewerbepark 11 99441 Umpferstedt

Koşul: yeni, azami yük ağırlığı: 10.600 kg, toplam ağırlık: 14.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.200 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm including rear bevel Width: 2,550 mm Loading height: 900 mm Further information plus freight / provision from stock 26639 Wiesmoor €1,280.00 / net Iisdjy Dzk Sjpfx Ab Teb - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consisting of: Central axle trailer chassis Fine-grain steel welded construction Outer frame slightly sloped, new version with "Load-Lock profile" for lashing strap attachment 6 pairs of lashing rings outside in floor/outer frame, each 5t 3 pairs of lashing rings outside in floor, each 5t 1 x front in the corners, 1 x before and 1 x in the rear bevel at the back Gear support leg at front Foldable rear supports Wheel chocks with holder Steel underrun protection Full-width rear mudflap (not in combination with forklift holder) Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing device for central axle trailer Drawbar with certified 40 mm eye Height adjustable drawbar via spindle, max adjustment range 250 mm Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" to reduce tyre wear and fuel consumption Air suspension with raise & lower valve Wheels & Tyres 235 / 75 R 17.5" manufacturer’s choice Steel twin rims, factory silver Brake system 2-line compressed air brake system Spring loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines to the towing vehicle, 24 Volt EBS, electronic braking system with EBS socket at front and connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable, Floor Steel/ribbed plate floor for high point load resistance Note: slight floor unevenness possible due to welding distortion! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / corner stanchions at front 25 mm aluminium hollow profile, 400 mm high Side walls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to frame with bracket for securing ramps, entry width approx. 2,430 mm Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps with wooden covering (front section with steel/ribbed plate) with gas strut for one-person operation Operating notes The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permitted axle, nose, and fifth wheel loads. (Poor driving and trailing behavior due to incorrect load distribution possible) Special permit required for trailer train length exceeding 18,750 mm. Observe country-specific registration regulations. Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline prepared for single-line number plate holder Contour marking with reflective strips acc. ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Novagrau "10-year anti-perforation warranty" Front wall aluminium Side wall anodized aluminium Ramps hot-dip galvanized

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902037402, boş ağırlık: 6.460 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2026, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.680 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.010 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, yerden yükseklik: 310 mm, Üretim yılı: 2025, The images are archive photos // Vehicle may still be in use! - Patented "D-Lock" door retainer for I-Lock latch (not compatible with curtain direct tensioner), awarded the "INTERNATIONAL TRAILER AWARD 2025" - Pallet box for 24 Euro pallets (ground clearance approx. 310 mm) - "Heavy Blocker" rear underrun protection, transverse + side roller bumper pads - 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, mounted on both sides behind the axle assembly Iisdpfxoyc D H Sj Ab Tsb - 1 storage box for fire extinguisher up to 6 kg, mounted on the bulkhead - 1 fire extinguisher (ABC powder, 6 kg) - 1st axle with automatic lifting axle function, including forced lowering and start assist, operated via "3x braking" - 3 pairs of sliding rings, adjustable the full length, with 4-part insert pockets and a long pocket at the bottom - 5 rows of aluminium V-insert slats (4 rows when combined with side walls) - 2 pairs of Vario steel slats, in conjunction with Vario beams for forward and rear load securing - Fliegl Blitz curtain system - Non-elastic roof, minimal roof beam deflection during loading and unloading - Optimally designed rear rain gutter, located at the top of the rear frame, above the doors - Fliegl manufacturer's certificate of body strength according to EN 12642 XL - Currently features customer branding; tarpaulins can be replaced and rear branding can be covered!

Koşul: ikinci el, azami yük ağırlığı: 28.410 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2012, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 700 mm, FLIEGL yan camlı ve 3 akslı dorse Iiodpjwgghnjfx Ab Teb Yararlı yük: 28.410 kg Tip: SDS350 Fren: Disk fren Aks: BPW + Havalı süspansiyon 2x destek ayağı (JOST) Uzunluk: 13,60 m Genişlik: 2,40 m Yükseklik: 0,70 m Finansman/kiralama alanında da partnerlerimizle size memnuniyetle destek oluruz. Tüm bilgiler garanti edilmez. Hata ve ara satış hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container First registration: 2023 Permissible total weight (technical): 38,000 kg Chassis tare weight: 3,640 kg High-Cube container tare weight: 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with traction aid Equipped with vehicle driving stability system Axle load detection 6x 385/55 R 22.5 tyres Iiedevzk Najpfx Ab Tob 40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 cbm Fits 25 Euro pallets Accessible with pallet truck and forklift Condition: A1 RENTING is the new BUYING – also available from us as full-service rental.

Koşul: ikinci el, boş ağırlık: 8.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/1996, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Araç lokasyonu: Bovenden, 4 akslı, döner tabla, yaprak süspansiyon, 3 metreye kadar genişletilebilir, bağlama halkaları, 2 parçalı rampalar, hidrolik rampalar, arka destek, yan alüminyum yan koruma, çift tekerlek, depolama kutusu. Üst yapı: Hidrolik 2 parçalı rampa ile donatılmış 4 akslı alçak yükleyici dorse. Yükseklik yaklaşık 900 mm. 4x 10 ton SAF aks, kampanalı frenler, 40'lık ve 50'lik çeki halkası! Üst platform uzunluğu yaklaşık 2900 mm! Alt platform uzunluğu yaklaşık 7100 mm! EKİPMAN BİLGİLERİ GARANTİSİZ VERİLMİŞTİR, değişiklik, ara satış ve yazım hataları saklıdır! Isdjywvhropfx Ab Tjib

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 01/2014, yükleme alanı uzunluğu: 13.660 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.810 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65, lastik durumu: 50 yüzde, dingil mesafesi: 9.000 mm, renk: diğer, Üretim yılı: 2014, Donanım: ABS, = Diğer seçenekler ve donanımlar = - BPW dingiller - Kaldırılabilir dingil - Havalı süspansiyon - Disk frenler = Diğer bilgiler = Dingil konfigürasyonu Lastik ebatı: 385/65 Dingil markası: BPW Arka dingil 1: Maks. dingil yükü: 9.000 kg; Lastik dişi: %50 Arka dingil 2: Maks. dingil yükü: 9.000 kg; Lastik dişi: %40 Arka dingil 3: Maks. dingil yükü: 9.000 kg; Lastik dişi: %40 Ağırlıklar Boş ağırlık: 5.880 kg Yük kapasitesi: 33.120 kg Azami toplam ağırlık: 39.000 kg Bakım Iiodpfxoyzhfqe Ab Tob Muayene (TÜV): 03.2027'ye kadar geçerli Kimlik Plaka: ON-68-FS

Koşul: ikinci el, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2013, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, Schmitz Cargobull S01 Platform, kaldırılabilir dingil, alüminyum yan duvarlar, stanchion ÇELİK TAŞIMACILIĞI Iijdpoyulw Nsfx Ab Teb Sorgu için iç no: 0326236 * ABS * EBS * 3 dingil, havalı süspansiyon * Kaldırılabilir dingil * Disk frenler * BPW dingiller * Alüminyum yan duvarlar * Stanchion (payanda) Yükleme alanı boyutları: Uzunluk: 13.600 mm Genişlik: 2.520 mm Lastikler: 1. dingil: 385 / 65 R 19,5 %20 havalı süspansiyon / kaldırılabilir dingil 2. dingil: 385 / 65 R 19,5 %20 havalı süspansiyon 3. dingil: 385 / 65 R 19,5 %20 havalı süspansiyon Fiyat: 9.900 EUR + %19 KDV Sorularınız için aşağıdaki numaralardan bize ulaşabilirsiniz: * Konuştuğumuz diller: Almanca, İngilizce, Fransızca, Lehçe ve ????? Yazım hataları, yanlışlıklar ve ara satış hakkı saklıdır.

Koşul: yeni, boş ağırlık: 6.600 kg, azami yük ağırlığı: 17.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 10.900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5 (Doppelbereifung), renk: gümüş, vites türü: mekanik, şehir içi yakıt tüketimi: 1.090 l/100 km, Unladen weight: 6,600 kg, permissible total weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate registration technically possible Total technically permissible weight: 24,000 kg / 30,000 kg Payload approx.: 17,400 kg / 23,400 kg Unladen weight approx.: 6,600 kg +/- build tolerance Dimensions approx.: Total length: 10,900 mm Total width: 2,550 mm Neck length: 2,180 mm Low bed platform length incl. rear bevel: 6,500 mm Rear bevel length: 950 mm Chassis width: 2,520 mm Loading height in loaded low bed: 860 mm Drawbar height: 900 mm Drawbar length: 1,900 mm Iisdex Nrp Nopfx Ab Tsb Features: - Extendable outriggers to 3,000 mm (not in rear bevel) incl. wooden planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box integrated in transition slope to gooseneck - 1 plastic toolbox with shelf, 620 x 360 x 440 mm (w/h/d) - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, timber lined - Ramps with spring-assisted lifting - Frame hot-dip galvanized Subject to errors and modifications.

Koşul: ikinci el, azami yük ağırlığı: 32.700 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2022, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 39.000 kg Boş ağırlık: 6.300 kg Taşıma kapasitesi: 32.700 kg Toplam uzunluk: 13.850 mm Yükleme uzunluğu: 13.650 mm Genişlik: 2.550 mm Yükseklik (yükleme): yaklaşık 1.100 mm Diğer bilgiler: - İç yükseklik yaklaşık 2.600 mm - İç uzunluk yaklaşık 13.650 mm - İç genişlik yaklaşık 2.480 mm - Lastik ölçüsü 385/65R22,5 - SAF akslar - Alt koruma (underrun koruma) - Forklift giriş yuvası arka - Havalı süspansiyon - Son aks yönlendirmeli - "Blitz" sürgülü üst tente Ijdpfxsywq E Se Ab Tsib - Sürgü halkaları - Takma çıtalar

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2005, renk: diğer, Üretim yılı: 2005, Aks 1: sol 4-8 mm, sağ 10-10 mm Aks 2: sol 10-10 mm, sağ 12-12 mm Aks 3: sol 4-8 mm, sağ 4-4 mm Iijdpfx Abjywtcys Tjb Römorkları istifleme imkânımız mevcuttur! = Daha fazla bilgi = Boş ağırlık: 4.200 kg

Koşul: ikinci el, boş ağırlık: 6.990 kg, azami yük ağırlığı: 28.010 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2021, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. 3 axles, air suspension, rear axle self-steering, ABS (anti-lock braking system), lashing eyes, underrun protection, support legs, storage box. Iodpfsx I I Apsx Ab Toib Superstructure: 2 units available! Total length approx.: 13,800 mm Total width max.: 2,550 mm Total height approx.: 2,488 mm Gooseneck length approx.: 4,050 mm Lower deck length approx.: 9,600 mm Loaded deck height in low-bed approx.: 900 mm Internal width approx.: 2,480 mm Saddle height approx.: 1,150 mm King pin fitting dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Fined-grain steel welded construction in reinforced design, fifth-wheel plate with replaceable 2'' king pin, outer frame slightly sloped with 'Load-Lock profile' for tension belt attachment, 8 pairs of additional lashing eyes (5 t each) recessed into the outer frame, 1 removable compensating block on the low-bed (3-piece), wooden cross-beam support at least 200 mm wide for height adjustment, gooseneck adjustable in 3 positions with parking position at the neck, 4 pairs of stake pockets (83 x 83 mm) recessed in the floor for inserting the compensation block, open compartment for plug-in stakes under the loading platform, 13 pairs of stake pockets (internal dimension 70 x 40 mm) recessed in the outer frame (3 pairs on the gooseneck and 10 pairs in the low-bed), 3 rows of stake pockets recessed in the floor, each with 7 stake pockets (70 x 40 mm internal dimension), 26 removable stakes, dimensions W=80 / D=50 / L=1200 mm, hot-dip galvanized. Hardwood floor approx. 30 mm thick, lengthwise installation with omega profiles for high point load capacity in the wheel arch area, steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Changes, prior sale, and errors excepted!

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Iiodpsi Ri Rvofx Ab Tsb Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: 2dee9cc4124b79c4820f5c3cf, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Fine-grained steel welded construction, saddle plate with replaceable 2" kingpin, outer frame slightly slanted, new version with load-lock profile for lashing strap attachment, 24t two-speed landing gear, single-sided operation, with straight base, without sliding compensation. Note: Free support leg corner spacing or free swing radius to the rear approx. 1930 mm, pull-out ladder at the rear, side door retainer, 2 wheel chocks with holders, Side underrun protection made of aluminum, rear underrun protection galvanized steel, quarter-shell mudguards in front of and behind the axle assembly, antispray splash flaps according to EC, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axles/chassis laser-measured for reduction of tire wear and fuel consumption, air suspension 2-line compressed air braking system, color-coded piping for easy service, spring-loaded parking brake, 2 non-interchangeable coupling heads at front, without connecting line, EBS (Electronic Braking System) with EBS socket at front, without connecting cable. Attention: The trailer may only be towed by towing vehicles that can ensure ABS functionality! With raise and lower valve, vehicle stability control system. 385/65 R22.5 tires, brand at manufacturer’s discretion, steel wheel rims, factory silver. 24 Volt, multi-chamber tail lights, side yellow LED lighting, 2 white position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable. Floor: Anti-slip phenolic plywood panels approx. 30 mm thick, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg. Front wall/corner posts: 2580 mm high, corner posts in volume design (steel), unlocking device for side tarpaulin at the front wall, crash blocker, lower inside edge with approx. 140 mm high steel impact guard. Center posts: 3 pairs of sliding posts, adjustable over the entire length, with 4 insert pockets per post and long pocket at the bottom, 3 post positions per side. Insert boards: 5 rows of wooden insert boards. Rear wall/corner posts at rear: rear corner posts steel up to lower roof edge, hook-in for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf, each with 2 internal locking rods. Tarpaulin: tarpaulin with welded horizontal and vertical belts, stainless steel tensioning locks. Roof: sliding roof, rear end-lift foldable, roof can be pushed from rear to front, L-roof beam for the automotive industry, internal width between roof beams approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of roof beam during loading/unloading, optimal rain gutter at rear on end hoop, above doors. Germany, approval in accordance with EC 2007/46, 24/7 service hotline, Fliegl manufacturer certificate for body stability per EN 12642 XL, prepared for single-line number plate holder, warning sign per ECE-70, reflective stripes: white (continuous along lower edge of side curtain and in upper corners; if visible sideboards, stripe at lower edge of sideboards), reflective stripes: red (surrounding the rear portal). Iijdpfxji Riy Tj Ab Teb Frame DB 7350 Novagrau, 10-year warranty against rust penetration, landing legs coated black, front corner posts hot-dip galvanized, front wall aluminum, rear corner posts hot-dip galvanized, rear wall white, tarpaulin to RAL as desired, single color and subject to availability. Note: Archive im

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Isdpfx Asi Ri Iaeb Tjib Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Ijdpfx Absi Ri Rys Toib Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: 068983c41e44eb5660fa9100c, boş ağırlık: 6 kg, azami yük ağırlığı: 28 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further Information Chassis Semi Logistics Fine-grained steel welded construction with preload slight pre-tension in the neck area, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length Slightly sloped new outer frame version with load-lock profile for attaching lashing straps 24 t 2-speed landing gear, single-side operation, with straight lower part, without compensating foot Note: Free support leg corner dimension or clear rear swing radius approx. 1,930 mm Pull-out ladder at the rear Side door holders 2 wheel chocks with bracket Side underrun protection aluminium Rear underrun protection galvanized steel Quarter mudguards in front of first axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser measured to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line arrangement for easy service. Spring-loaded parking brake 2 foolproof coupling heads at front, without connection line EBS, Electronic Braking System with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor vehicles that ensure the effectiveness of the ABS! with lift & lowering valve Vehicle - Driving Stability System AAC Basic, automatic axle lift on the last axle as a maneuvering aid, active up to 20 km/h, can be deactivated manually Axle load detection via EBS canbus signal, for display on the in-cab monitor, truck must be correspondingly equipped, no installation (not a calibrated scale) Wheels and Tires 435/50 R19.5, brand as selected by manufacturer Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights with flashing function, connected with indicator 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin foolproof sockets at front, without connection cable Floor Iedsi Riwuspfx Ab Tjib Antislip phenolic plywood floor approx. 30 mm thick, on long longitudinal beams for high point load capacity for fork-lift axle load up to max. 7,100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions, volume construction, release mechanism for side curtain at front wall, crash blocker, inner lower section with steel bumper at approx. 140 mm height Middle stanchions 3 pairs of sliding stanchions, fully adjustable lengthwise, with four insertion pockets and long pocket below. 3 pairs of stanchion positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner stanchions Rear steel corner stanchions up to lower edge of roof, hooks for curtain with round tube and tension ratchet Double-wing rear portal doors with 2 internal locking rods each Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, rear end-lift foldable, roof slides from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal roof beam sag during loading and unloading EcoLift - lifting roof can be raised approx. 380 mm on both sides, with gas pressure strut support, 3 ride heights at front: Internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, adjusted to approx. 3,000 mm Optimized rain gutter at rear, at upper end cross member, above doors Operating Notes Special permit required if overall train length exceeds 16,500 mm. When arrangi

Koşul: yeni, makine/araç numarası: f80f2330e1318ef03bc20755e, boş ağırlık: 3.200 kg, azami yük ağırlığı: 35.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Iisdpfsi Riwqex Ab Tjb Fine-grained steel welded construction in lightweight design, fifth-wheel plate with replaceable 2" kingpin, only 2 longitudinal members as double-T-beams for subsequent mounting of a headboard rack at the front in the new/current design, outer frame slightly angled with load-lock profile for lashing strap attachment. Note! In order to attach straps in conjunction with drop sides, the sides must be opened! 24 t, 2-speed landing gear with single-sided operation, straight base, without slide compensation, wheel chocks with holders, foldable aluminium side underrun protection, extendable galvanized steel rear underrun protection, half-shell mudguards - loose, not installed!, with anti-spray flaps behind each axle, 1 plastic water tank, capacity approx. 30 l, installed on the left (direction of travel). BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift axle, additionally manually lowerable, operable via push button on the vehicle. 2-line air brake system, with 1 standard central air reservoir, spring-loaded parking brake, 2 interlock-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable, EBS 2S/2M, test connection for brake cylinder pressure leading outside on the EBS module. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lifting and lowering valve, control unit + brakes integrated in the frame as with tipper semi-trailers, mounted in front of the axles. Brake lining wear indicator on disc brakes via ABS/EBS lamp on the truck. 385/65 R22.5 Continental make, steel rims, factory silver. 24-volt multi-chamber lights, side-mounted yellow LED lighting as on tipper semi-trailers, 3,000 mm width must be observed, 2 front white position lights in LED, loose, 2 white/red lane marker lights at the rear, 2 x 7-pin interlock-safe sockets at the front, without connecting cable. Germany, approval to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double one-line license plate holder: 1 x plastic and 1 x stainless steel interchangeable holder. Warning panel according to ECE-70, aluminium, loose, EBS, safe parking, without contour marking / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, Landing legs: black coated. Immediately available!

Koşul: yeni, makine/araç numarası: d9c951d746f03c05bc5470f89, boş ağırlık: 5 kg, azami yük ağırlığı: 29.045 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Forwarding Fine-grain steel welded construction, fifth-wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading area, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stanchions can be locked at 100 mm intervals for an internal width of 2,100 mm to 3,000 mm, 4 pairs of divisible stanchions 600 mm + 1,200 mm, total height 1,800 mm, removable. For an internal stanchion width above approx. 2,350 mm, oversize width. Vario bulkheads Floor prepared for the installation of 3 bulkheads. 4 x 5 pairs of Vario stanchion pockets for plug-in bulkheads (front and rear respectively), and 1 x 3 pairs each in the center for transporting welded mesh of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario bulkheads, each consisting of 1 pair of plug-in stanchions and 1 crossbeam at the top approx. 2,200 mm wide. Crossbeam extendable by 220 mm on each side, with lashing hole for securing. Height of Vario bulkhead approx. 1,900 mm, adjustable to 1,300 mm or 700 mm. 4 stanchion pockets recessed in the center of the floor for 80 x 80 mm plug-in stanchions 1 pair of supports at the bottom for front Vario bulkhead 1 pair of supports at the bottom for rear Vario bulkhead Outer frame with slight incline, with Load-Lock profile for lashing strap hooks 14 additional pairs of lashing eyes recessed in the outer frame, 5 tons each 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensating device Pull-out ladder at rear Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Quarter fenders in front of and behind the axle assembly With anti-spray mud flaps only on the last axle Rear impact guard 8 construction steel winches with wire rope and counter hooks, 4 left and 4 right, with wire rope routing through the outer frame, 1 removable plug-on transmission for construction steel winches – supplied loose (without frame mount) 1 spare wheel holder for 1 E-wheel, with wheel fastener set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 stanchion storage box closed, open at the top, below the loading area, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 4 lashing/stanchion rails set transversely in the floor across the full width to the outer frame (max. usable internal width between the outer plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spaced approx. 60 mm apart (of the round steel). Bottom finishes with angle steel, half open downwards. For lashing and plugging in 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed solely for securing long loads, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by braking 3x (starting aid works up to 30% axle overload and up to a max speed of 25 km/h) Axle lift below the recommended driving height, therefore no warranty for tire damages Brake system 2-line compressed air brake system, color-coded line routing for easy service Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, no c Iijdpfx Aei Ri R Dob Tsb

Koşul: yeni, azami yük ağırlığı: 34.310 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Vehicle / Body: Trailer Container Chassis Semi-Trailer Unladen weight: 3,690 kg Total length: 13,500 mm Width: 2,520 mm Fifth wheel height approx.: 1,120 mm Further information: - 3-axle Iodpfsk N Acusx Ab Tsib - Frame hot-dip galvanized incl. passivation - 1 x 45-foot container with extended gooseneck tunnel and slanted front corners - 24 t, 2-speed landing gear, single-sided operation - Side underrun protection in aluminum, underrun protection in galvanized steel, extendable underrun protection for 45-foot containers - Plastic toolbox - Air suspension - 1st axle with automatic lift axle - Tyres 385/55 R22.5 - 2x 7-pin and 1x 15-pin sockets in front From current production

Koşul: ikinci el, azami yük ağırlığı: 31.620 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2016, Platform B = 12.000 mm Yükleme uzunluğu: 13.500 mm, yükleme genişliği: 2.480 mm Yükleme yüksekliği: 1.200 mm SAF akslar Iiedpfx Aex I U E Dsb Tjb Son aks yönlendirilebilir (art aks) Havalı süspansiyon Kaldırılabilir aks Genişletme levhaları Enine şeritli yük direkleri Şaside direk cepleri Konteyner kilitleri 2x 20 ve 40 ft

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Iisdpfoqpgtmox Ab Teb Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!