Kullanılmış Fliegl Sds 470 T Satteltieflader Mit Rampen satın al (55.482)

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear Isdpfjl Th Evox Ab Totg * Tire pressure monitoring system with cab display option via EBS signal – no installation required on the truck side * Warning sign package front & rear * Reflective contour tape, side and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additional 12 V – 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Closed single plastic mudguard front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Extended offset by 500 mm to the front * Extended turntable platform at the front by 520 mm with 45° corners and three recessed storage compartments incl. lid, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, low-bed platform floor made of 60 mm softwood * Outer planks of ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes supplied), each with 2 t lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; one pair of 13.4 t lashing rings at the front and rear outer frames; four pairs of 10 t swivel and retractable lashing rings per side, loadable in all directions and integrated into the outer frame; two pairs of 6.4 t lashing rings on the side in the excavator stick rest; eight pairs of galvanized folding outriggers for 3 m overall width (not on rear incline) * Widening planks stored left side in storage compartment * Excavator stick rest over rear axle to end of rear incline, approx. 2,300 x 740 x 190 mm * Mechanical rear support legs * Hydraulic, hot-dip galvanized ramps, approx. 3,000 x 720 mm * Hydraulic side ramp displacement on guide tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Laden loading height approx. 860 mm (incl. 860 mm rear incline) * Chassis, turntable, ramps, and rear mechanical support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 21 / 2026

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye Iedpfx Abel Thyxo Tstg ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Landing gear at front Isdpfor Dpzuex Ab Totg * Mechanical drop-down jacks at rear * Fixed welded drawbar with low-maintenance K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate), with raised bracket for connecting lines * 12 V, 7 + 4 pin electrical connection * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, operable from the towing vehicle without need for vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, side-mounted on the right * Chassis made of fine-grain steel * Steel three-way tipper body with M-Strong drop sides (fixed front panel, continuous side panels without intermediate stanchions, pendulum-mounted via manual central locking and mechanically foldable with drop side spring assist) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute, 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner (recessed and foldable), 4 x 3 t on each side * Two-step hot-dip galvanized access ladder at the front left * 1 pair aluminum loading ramps (10 t/pair, axle spacing > 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 sockets for aluminum loading ramps, rear-mounted in chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm * Superstructure paintwork in RAL 9010 pure white * Chassis, drawbar, rear drop-down jacks, underride guard hot-dip galvanized * Axles, air tanks, front landing gear * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalization system with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed, welded-in drawbar with a low-maintenance K80 ball hitch (adjustable by +77 mm / 33 mm via head plate), with raised bracket for connection lines * 12 V 7 + 4 pin electrical wiring * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel pallet 3-way tipping body with M-Strong side walls (fixed front wall, continuous side walls - without central stanchions - swinging on mechanical central locking and mechanically foldable with drop-side spring lift) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner, plus 4 x 3 t each side, recessed and foldable * Hot-dip galvanized 2-step access in front of the front wall (on driver’s side left) * 1 pair aluminum loading ramps (10 t / pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 ramp storage compartments at the rear, integrated into chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm, unloaded approx. 590 mm * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports and underride protection all hot-dip galvanized * Axles, air tanks, front support winch * K80 hitch painted in black * New vehicle with manufacturer’s warranty Itodor Dpz Hjpfx Ab Teg * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost Isdpfxol Thyms Ab Totg * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf at the A7

Koşul: ikinci el, makine/araç numarası: WFDFLT33902010171, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2013, renk: diğer, Üretim yılı: 2013, Daha fazla bilgi için lütfen bizimle iletişime geçin. Itodsyhb H Hopfx Ab Tsg

Koşul: ikinci el, azami yük ağırlığı: 27.290 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.853 mm, Donanım: ABS, SDS390 101m³ X-TRA Long Walking Floor, Lift Axle, SAF* German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes * Floor: Walking floor with rear wear plate made of V2A stainless steel sheet, aluminum floorboards, 8 mm floor profile, ribbed design, end caps in aluminum * Tires: 385/55 R 22.5, 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Gross permissible weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information without guarantee * Further information and specifications on request. Additional Services: Itjdpfx Aberwvl To Tsg * Repainting and retrofitting possible * Short-term or customs license plates available * Transfer and shipping possible * Assistance with customs and export documentation * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often assist customers with weak credit ratings and connect them with reputable leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Говорим по-русски. Repainting in your desired color is possible at our company at a reasonable price and in good quality. Are you located further away and have no opportunity or time to visit and inspect a truck in person? No problem—you are welcome to commission an independent expert of your choice to inspect the truck technically and visually. Should any deficiency arise contrary to expectations, we can rectify it quickly and efficiently in our workshop. Additionally, for an extra charge, we can deliver your new used vehicle Europe-wide.

Koşul: ikinci el, toplam ağırlık: 39.000 kg, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 10/2025, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 2.150 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.850 mm, Donanım: ABS, Fliegl Alüminyum Damperli Dorse - 48 m³ - Kaldırma aksı - SAF akslar Itjdpsxcr H Eefx Ab Tjg - Salıncak kapılar - LED çalışma projektörleri - Muayene geçerlilik: 10.2025 - SP geçerlilik: 04.2026 Hatalar ve ara satış hakkı saklıdır. Dahili araç numarası: 11351. WhatsApp desteği mevcuttur! Araçla ilgili sorularınız veya daha fazla bilgi için bize kolayca WhatsApp üzerinden yazabilirsiniz.

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2011, renk: diğer, Üretim yılı: 2011, Aks 1: sol 8 mm, sağ 8 mm Aks 2: sol 8 mm, sağ 8 mm Itodpfx Ajxqfybob Tsg Aks 3: sol 8 mm, sağ 8 mm Römorkları istifleme imkânımız vardır! = Daha fazla bilgi = Boş ağırlık: 5.100 kg

Koşul: ikinci el, azami yük ağırlığı: 24.200 kg, toplam ağırlık: 31.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 13.850 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.860 mm, yükleme alanı hacmi: 93 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Sürgülü taban +/- 93 m³, arka çift kanatlı kapı ve döner çubuk kilidi, üst yapının önünde tırmanma ve durma platformu, branda, "Cargo Floor" taban (21 tahta x 10 mm), sürgülü tabanın altında arkada paslanmaz çelik aşınma plakası, her iki tarafta 12 yük bağlama halkası, tam boşaltma (hareketli ön duvar), içeri/dışarı sürme fonksiyonu, yükleme manometresi, katlanır arka lamba koruması, kablolu uzaktan kumanda, ABS, EBS, BPW Eco Plus aks(lar), kampanalı fren sistemi, destek ayakları, 1x alet kutusu, araç reklam ile kaplanmış ve/veya yazılı olabilir. Ijdpfx Absr Hlvkj Tstg SI84517 Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizin teklifini memnuniyetle sunarız! Araç reklam ile kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu obje için finansman veya leasing teklifi de memnuniyetle hazırlanır. Lütfen bizimle iletişime geçin!

Koşul: yeni, boş ağırlık: 3.120 kg, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, lastik boyutu: 245 / 70 R 17,5, dingil mesafesi: 990 mm, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245 / 70 R 17,5, arka lastik boyutu: 245 / 70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Each ramp approx. 2,700 mm long x 900 mm wide, ramps with grating surfaces, loading height: 840 mm, 12 lashing rings, each with 2.5 t capacity, 8 lashing rings, each with 6 t capacity, steel sideboards, foldable and removable, 50 mm wooden planks, loading area at rear tapered, internal loading width 2,480 mm, removable rear rack, open front for through-loading, also available with a loading area length of 5,300 mm! Rental price from €500. -- Subject to typographical errors, mistakes, and changes, sample images --. More data available at: !, More Details: ! Iodpfx Abey Iryfo Tetg

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33903000211, boş ağırlık: 7.707 kg, azami yük ağırlığı: 27.293 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2023, yükleme alanı uzunluğu: 15.030 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 101 m³, toplam uzunluk: 15.350 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", Üretim yılı: 2023, The images shown are stock photos; the vehicle may still be in use! Vehicle configuration: Chassis: • Semi-trailer, haulier specification • Fine-grain steel lightweight welded construction up to the support legs, fifth wheel plate with replaceable 2" kingpin Ijdpfx Absy Snmpo Tstg • 24 t two-speed landing gear, single-sided operation, with straight lower section • Rear extension ladder • Side door retainers • 2 wheel chocks with holders • Aluminium side underrun protection • Steel rear underrun protection with wide Fliegl mud flaps • Foldable mudguard for lighting unit • Quarter shell fenders • Rear impact protection • Tarpaulin support bar with holder • 1 plastic toolbox Axles & Suspension: • 3 BPW disc brake axles • 'Axles/Chassis laser-aligned' for reduced tyre wear and fuel consumption • Air suspension Brake system: • Two-line compressed air brake system • Colour-coded pipework for easier servicing • Spring-actuated parking brake • Duomatic coupling • EBS (Electronic Braking System) with EBS socket at front, without connection cable Note: This trailer must only be towed by tractors that ensure the effectiveness of the ABS! • With lift and lower valve Vehicle stability system: • AAC Basic, automatic lift axle on the last axle acts as a maneuvering aid, up to 20 km/h, can be deactivated manually • Axle load detection via EBS Canbus signal Wheels and tyres: • 385/55 R22.5", manufacturer at supplier's discretion Electrics: • 24 Volt, multi-chamber rear lights, side yellow LED lighting • Side yellow LED lights linked to indicators (flashing side marker lights) • 2 white front position lights • 2 white/red lane marker lights at rear • 2x 7-pin and 1x 15-pin interchangeable sockets at the front, without connection cable SB Hydraulics: • Hydraulic cylinder with sliding device fitted in the floor. 2-circuit hydraulic system. • Forward/reverse switching is electric via cable remote control. • Operation hydraulically via truck PTO • Hydraulic connection with hose at front wall and HDK screw-in plug Recommended pump performance: • Flow rate: 110 ltr/min • Pressure: 250 bar • Oil reservoir minimum: 100 ltr Floor: 8 mm aluminium floor planks, grooved design Aluminium box-type body made of high-grade, wear-resistant material. Front and side walls from aluminium hollow profiles, all-round upper edge with welded-on wide special reinforcement profile. Sliding wall for improved load discharge, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminium hollow profiles, double-leaf door with 50/50 split, all-round special U-profile frame with stop and rubber gasket, equipped with 2 external locking rod mechanisms, locked top and bottom. Rear wall with mechanical safety lock, operated from the left-hand side (direction of travel). With pivoting upper crossbar. Standing platform with ladder access from both sides 3 removable, pivoting cross bars for tarpaulin support Roll tarp, one-sided opening, with 2 longitudinal tensioning straps, 3 ratchet tensioning straps on the side Operating instructions: Special permit required if overall length exceeds 16,500 mm. Registration/Country plates: • Germany • With Dekra inspection and report (in accordance with §13 EC-FGV) • Warning sign "Long vehicle" • Long vehicle/trailer combination certificate • Driver briefing at the Triptis factory for up to 4 people per truck combination Paintwork: • Frame: DB 7350 Novagrau • Body: Natural aluminium • Roll tarp: RAL 7035 light grey

Koşul: yeni, boş ağırlık: 3.120 kg, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.280 mm, yükleme alanı genişliği: 2.480 mm, süspansiyon: çelik, lastik boyutu: 245 / 70 R 17,5, dingil mesafesi: 990 mm, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 245 / 70 R 17,5, arka lastik boyutu: 245 / 70 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, each ramp approx. 2,700 mm long x 900 mm wide, ramps with grating surfaces, loading height: 840 mm, 12 lashing rings each rated at 2.5 t, 8 lashing rings each rated at 6 t, steel drop sides, foldable and removable, 50 mm wooden floorboards, loading area with rear slope, internal loading width 2,480 mm, removable rear stanchion, open front for through-loading, also available with loading area length of 5,300 mm! Rental price from €500. -- Subject to misprints, errors and changes, sample images used -- More data at: !, More Details: ! Iedpfxsy H A Rfo Ab Totg

Koşul: ikinci el, boş ağırlık: 3.690 kg, azami yük ağırlığı: 9.810 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2019, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.700 mm, yükleme alanı hacmi: 48 m³, süspansiyon: hava, lastik boyutu: 285/70R19,5 148J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 285/70R19,5 148J, arka lastik boyutu: 285/70R19,5 148J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors in printing, inaccuracies, and subject to change, Sample images --, More data at: !, More details: ! Itodpfx Abey Hhzcs Teg

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, kilometre: 163.260 km, güç: 346 kW (470,43 bg), ilk tescil: 07/2021, yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, yakıt: dizel, renk: beyaz, şoför kabini: gündüz kabini, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2021, Donanım: ABS, AdBlue, USB portu, diferansiyel kilidi, düşük ses seviyesi, elektrikli cam sistemi, hidrolik, hidrolik direksiyon, hız sabitleyici, immobilizer sistemi, klima, kompresör, merkezi kilitleme, navigasyon sistemi, sisal lambaları, tır çekici bağlantısı, çekiş kontrolü, MAN TGS 26.470 – 4 BL with Rear Steering Axle First Registration: 02.07.2021 Available immediately 163,260 km mileage Suction and pressure vehicle with high-pressure flushing unit EURO 6 E engine with 346 kW – 470 HP Kroll superstructure type: K 14.0 / 28 PE with ADR tank code L4BH, LF AT Isdpey Rhzdjfx Ab Tetg With telescopic piston, lockable in 3 positions Piston seals replaced Total tank capacity: 12,000 litres At piston position 1: 2,700 litres fresh water – 7,900 litres sludge water At piston position 2: 4,400 litres fresh water – 6,200 litres sludge water At piston position 3: 6,100 litres fresh water – 1,400 litres sludge water Operating overpressure: 1 bar Vacuum pump CVS VacuStar W 1600 1,600 m³/h air delivery rate 20-metre suction hose in storage cassette mounted on the tank Telescopic boom at the storage cassette, extendable by 1,850 mm High-pressure water pump Uraca KD 718 – G 60 Delivery rate: 315 l/min at 170 bar Dry-running protection for HP pump Flushing reel with 160 metres of DN 25 flushing hose Small HP reel with 60 metres of DN 13 flushing hose Large reel can swivel 180° Radio remote control Trailer suction connection Available also with tandem suction trailer The vehicle is in very good technical and visual condition All information without guarantee Sale only to traders or for export Subject to prior sale

Koşul: ikinci el, Fonksiyonellik: sınırlı işlevsellik, makine/araç numarası: WFDFLT33902030059, boş ağırlık: 7.452 kg, azami yük ağırlığı: 27.548 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.655 mm, yükleme alanı hacmi: 92 m³, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.005 mm, süspansiyon: hava, lastik boyutu: 385/55 R22,5", renk: siyah, Üretim yılı: 2023, The images are archive pictures; the vehicle may still be in use! Isdewk Dc Ropfx Ab Tetg Weights and Dimensions: Gross weight, permitted / technical: 35,000 / 39,000 kg Payload, permitted / technical approx.: 27,548 / 31,548 kg Aggregate weight, permitted / technical: 24,000 / 27,000 kg Permitted / technical kingpin load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- build tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner measurement approx.: 2,040 mm Chassis Semi-trailer Freight Forwarder Fine-grain steel welded lightweight construction up to the landing legs, fifth wheel plate with replaceable 2'' kingpin Lashing point preparations integrated in the floor (up to 13 pairs) 24 t 2-speed landing gear, one-sided operation, with straight lower section, without compensating adjustment Extendable ladder at rear Side door holders Wheel chocks with brackets Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable protective cover for lighting unit Quarter-shell mudguards Rear collision protection Axles + Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activated by braking three times Brake System 2-line compressed air brake system Color-coded pipe routing for easy service Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Wheels 385/55 R22.5" Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable SB Hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump output: Capacity: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l SB Tipper Body Aluminium box body made from high-quality, wear-resistant material. Front and side walls made of aluminium hollow profiles, all around the top welded with a wide special reinforcement profile made of aluminium, welded to a special frame at the bottom. Moving side wall for better unloading of the load, with reinforced curtain flaps at the bottom. Rear wall made of aluminium hollow profiles, double-wing door split 1/2 to 1/2, all around edged with a special U-profile with stop and rubber sealing, with 2 external rotary bar locks, locked above and below. Rear wall with mechanical safety lock, operated at the rear on the left in direction of travel. With swivelling crossbar at the top. Work platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin Removable and swiveling crossbars for tarp support + tarp support at the front bulkhead and at the rear on the back wall, Roll-out tarpaulin stored on one side with 2 longitudinal tensioning straps, 3 ratchet straps at the side, at the front bulkhead and over the rear doors the tarpauli

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2023, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 3.010 mm, toplam uzunluk: 13.900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 435/50R19,5, renk: diğer, Üretim yılı: 2023, Donanım: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Kerb weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Kingpin size: 2 inches, Suspension type: Air suspension, ABS, EBS, Year of body: 2023, Side wall material: Tarpaulin, Customs cord, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tyre size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 2: Tyre tread left: 10 mm; Tyre tread right: 10 mm Axle 3: Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functionality Loading platform height: 95 cm Iodpfx Aey N Rnksb Tetg Sliding roof: Yes Environmental Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly rotating stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognisable quality • Competitive prices • Professional trading practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Expert technical services • The assurance of “recognisable quality” • And more… Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send us an enquiry via our website. Ask us directly about our European warranty package.

Koşul: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2015, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.790 mm, lastik boyutu: 385/65 R22,5, renk: mavi, Donanım: ABS, hidrolik arka platform, KRONE SD Standart Treyler, MBB/Palfinger 2,0 ton alt katlanabilir liftli BPW akslar, disk frenli Yükseltilebilir aks Havalı süspansiyon, kaldırma/indirme fonksiyonu MBB/Palfinger alt katlanabilir lift 2.000 kg ABS/EBS 2x7 kutuplu elektrik bağlantısı 15 kutuplu elektrik bağlantısı Edscha kayar tavan Sürgülü brandalı/courtain sider kasa Çift kanat arka kapı Alet kutusu Boş ağırlık 7.660 kg Azami toplam ağırlık 39.000 kg Yükleme alanı ölçüleri: U 13,62 m x G 2,48 m x Y 2,79 m Lastik ebatı 385/65 R22,5 Itsdpeyplkfefx Ab Tjg Diş derinliği 1. aks 10-10 mm 2. aks 5-12 mm 3. aks 10-15 mm

Koşul: ikinci el, kilometre: 580.000 km, güç: 346 kW (470,43 bg), ilk tescil: 03/2021, yakıt türü: dizel, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 26.000 kg, lastik boyutu: 315/80 R22,5, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.500 mm, renk: beyaz, şoför kabini: yataklı kabin, vites türü: yarı otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, koltuk sayısı: 2, yükleme alanı hacmi: 19 m³, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.450 mm, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, hidrolik, hız sabitleyici, park ısıtıcısı, tır çekici bağlantısı, çekiş kontrolü, Permissible gross weight: 26,000 kg, cargo space length: 7,240 mm, cargo space width: 2,450 mm, tire size: 315/80 R22.5, cargo volume: 19 m³. 1st axle: , 2nd axle: , 3rd axle: , leaf/air suspension, steered lift axle, retarder, electronic brake system (EBS), electronic stability program (ESP), traction control (ASR), stationary air conditioning, air-suspended driver’s seat, adjustable steering column, electric windows, outside temperature display, fog lights, electrically adjustable and heated exterior mirrors, immobilizer, tinted windows, trailing axle steering, refrigerator, cup holder, rubber flooring, telematics system, foldable side boards. Subject to errors and changes. Electric lifting roof, roof with sliding cover, tail lift height: 1,100 mm, central axle trailer with first registration in 2010. Superstructure dimensions trailer: 8,140 mm internal length and 2,450 mm internal width. Unladen weight of the entire combination: 16,500 kg. Tipping to the left and right. Brake pad wear: 1st axle 82%, 2nd axle 27%, 3rd axle 37%. Engine oil 11.26, S12: 12.26, transmission oil, air dryer 01.27, air filter 12.27, axle oil 01.28, cooling system, steering front and rear axle: 01.29. Vehicle location: Budapest, Hungary. Itsdjyw Ucnjpfx Ab Teg

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange towing eye ----General Attachments: * Jost support windlass at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox mounted front right on the front wall exterior ----Electrics / Lighting: * Tire pressure monitoring system (RDÜ) * LED lighting ----Loading Platform: * Platform length 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of front wall for retrofitting container locks * Bolted front wall in smooth sheet steel * Drop-down, trapezoidal-profile steel side walls with sideboard spring assist Iedpfx Absq Ra D Ej Tstg * Steel rear wall, can be stowed between ramp holders when not in use, secured inside in front of the front wall * Rear staking pockets bolted ----Load Securing: * Perforated external frame, angled at approx. 45 degrees, with lashing capacity of 2 t every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm possible * In each corner (front and rear), 1 x 6.3 t lashing ring * Various holes in the front and rear carriers for 1.2 t lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear drive-up angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear accent and loading ramps * Board sides painted in RAL 9010 pure white * Optional painting of the side walls in another RAL color available at extra cost ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye Itjdpforvvfwox Ab Tjg ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * Plastic toolbox, front right, on the front wall exterior ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading area length: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Provision at the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal steel side walls with fold-down spring-assisted gates * Steel rear wall can be slid between the ramp holders when not in use, stored inside in front of the front wall * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to fit 3 t drop lashing brackets every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions and ramps * Side wall paintwork in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * available from calendar week

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902026582, boş ağırlık: 6.500 kg, azami yük ağırlığı: 28.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2020, lastik boyutu: 445/45 r19,5, Further Information The images shown are archive images; the vehicle may still be in use! Chassis / Semi-Trailer for Freight Forwarding Fine-grained steel welded construction, with light preload in the gooseneck area, turntable with interchangeable 2-inch king pin PRO SLIDE, additional sliding plate at the front to protect during coupling Side frame slightly slanted with Load-Lock profile for attaching lashing straps Note: To hook in the straps in combination with drop sides, the sides must be opened! 24 t 2-speed landing gear, single-sided operation, with semi-round lower part and straight mounting plate, with compensation for thrust forces Note: Free support foot corner dimension or free swivel radius to the rear is approx. 1,930 mm 1 pair gearbox support feet at the rear, with straight lower part and single-sided operation on the left (viewed from rear) Extendable ladder at the rear Side door retainers Wheel chocks with holder Aluminium side underrun protection Ijdpfeqhiyxex Ab Tetg Galvanized steel rear underrun protection Quarter fenders in front of 1st axle and behind each axle with anti-spray mud flaps behind each axle Heavy Blocker rear cross underrun protection + side roller buffer Pallet stop of heavy-duty design, bolted on both sides, approx. 15–20 mm high, with lashing possibility every 200 mm; loading height is reduced by approx. 15–20 mm Plastic toolbox with drawer and shelf, width 650 mm / height 520 mm / depth 670 mm, can be locked with a padlock (lock not included) Storage compartment for 16 insert slats, on left side under the loading platform Axles & Suspension BPW disc brake axles with 370 mm disc diameter, Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Loading height at rear in raised position: approx. 1,200 mm (air suspension on truck lowered to approx. 910 mm fifth wheel height) No lift axle Brake System 2-line compressed air brake system Color-coded line routing for easy service Spring-actuated parking brake Duomatic connector at the front, without connection line EBS make Wabco-E, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure ABS functionality! With raise & lower valve + auto-reset function Vehicle Stability System Ramp start-assist Wabco, TailGUARD with 3 ultrasonic sensors at the rear of the vehicle Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Reversing camera system with color flat-screen monitor, wireless connection to the monitor, monitor with suction cup mount and power supply via 24 Volt vehicle socket Floor Phenolic plywood approx. 30 mm thick, on longitudinal cross members for high point load capacity for fork axle loads up to max. 7,100 kg Heavy duty floor in the rear area, approx. 1,800 mm length Rear area with steel/chequer plate covering on approx. 300 mm length (slightly protruding) Front Bulkhead / Front Corner Posts 2,580 mm high, corner posts in heavy-duty steel version, quick-release device for side curtain at the front Crash blocker, inner lower section approx. 140 mm high with steel impact protection Center Stakes (Mid-Stanchions) 3 pairs of sliding stanchions adjustable along the entire length, with four insertion sockets and long socket below 3 pairs of stanchion positions Inser

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders Itodpfoq Euaksx Ab Tog * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm Itodpetpta Dofx Ab Tsg * 2 x

Koşul: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer system ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre monitoring system ----General Attachments: * Jost landing gear at the front * Outward folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted splash wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel sheet, foldable with drop side spring assist * Steel rear wall, can be inserted between the ramps – storage bracket inside at the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Provision for installing 3 t folding lashing rings every 600 mm * In each front and rear corner: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail centrally along the longitudinal axis, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear ramp approach angle approx. 860 mm ----Painting: * Chassis, drawbar, splash wall, rear wall, ramps, and folding supports hot-dip galvanized * Drop sides painted RAL 9010 pure white * Painting of side walls in a RAL color shade available at extra charge * Axles, springs, air tanks, flange eye, and landing gear painted in black ----Information: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: Itedsl Th Hwspfx Ab Tsg * Available approx. from CW 21/2026