Kullanılmış Müller Mitteltal Ka-Ta-Rt 18,0 18 T Tandemkipper- Tieflader satın al (57.532)

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Wind Jack * Rear Square Tube Supports with Spring Assist and Base Plate, Safety Lock Pins for Adjustable Support Heights * Drawbar with 40 mm Screw-Type Towing Eye (height-adjustable mm) * 15-pin Electrical Connector * LED Lighting * Flashing LED Side Marker Lights * Chassis Made of Torsion-Resistant Square Tubes and Cross Members Ppedju I Iq Eepfx Aibor * Closed Steel Mudguards with Splash Protection * Closed Side Underrun Protection, Usable as Advertising Space * Plastic Toolbox with Bottom Insert (installed lying down) approx. 500 x 350 x 400 mm * Swiveling Cable Drum Superstructure, width between drum arms 1,700 mm – with tension lock for drum securing at support arm ends as well as a central claw lock for securing the cable drum superstructure to the chassis * Motor-Hydraulic Drum Drive with Oil Motor * Valves and Adjustable Rubber-Covered Drive Rollers * Hydraulic Speed Controller and Brake for Drum Drive * Steel Drum Shaft with 76 mm Diameter as well as Centering and Rotatable Ends * 1 Pair of Stepped Polyamide Centering Cones * Hydraulic Pump Unit with Diesel Engine * Fuel Tank and Hand Starter * 6.5 HP with Gear Pump (150 bar) * Hot-Dip Galvanized Color * New Vehicle with Full Manufacturer Warranty * Subject to errors and prior sale * Immediately available ex Egestorf * Sample images

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossbeams * Closed fenders made of sheet steel with splash guards * Closed side underrun protection can be used as an advertising area * Plastic toolbox with base inlay (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, clear width between the drum arms 1,700 mm with tension latch for drum securing at the support arm ends and a central claw lock securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic lines supply and return * Chassis and hydraulic preparation for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty Pjdpfjxyniwox Aibspr * Errors and intermediate sale excepted * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve and manual lowering function for loading operations ----Drawbar / Flange Eye: * Drawbar with friction-locked height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin, 24 V connector * LED tail lights 12 / 24 V integrated into underrun guard ----General Attachments: * Front support winch * Rear foldable support legs (external) * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Platform: * Steel palette-type 3-way tipper body made of high-strength fine-grained steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood pad for excavator bucket, bolted to the front wall * Continuous side walls – without center stanchion – folding, with sideboard assist springs and swinging via manual central locking * Bolt-on rear stanchions * Combination steel double-wing tailgate, asymmetrically split, can be swivelled 270° and locked (not folding), with additional swinging frame for automatic tailgate opening during tipping process; locking by galvanized turn-bar lock and central locking mechanism; deactivation function for automatic tailgate opening when tipping backwards with the wing door open * 4 mm steel floor plate * Two-step entry ladder at the front left * Rear acceptance rail for drive-on ramps ----Load Securing: * Each corner with 1 x 7 t lashing point * Each side with 4 x 3 t recessed lashing rings in the outer frame ----Drive-on Ramps: * Rear ramp stowage compartment integrated into the chassis * 1 pair of aluminium drive-on ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for both rubber-tyred and tracked vehicles ----Painting: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun guard, rear folding supports hot-dip galvanized * Side walls – KTL coated – as well as tailgate painted in RAL 9010 pure white * Optional painting of side walls in RAL color tone available at extra charge * Axles, air tanks, flange towing eye, front support winch painted in black Pjdpfevin T Ssx Aibepr ----Notes: * --Cargo securing certificate in accordance with EN 12642 XL? * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) Ppedpfovin Ucox Aibjr * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering function, RtR valve, and manual lowering for loading process ----Drawbar / Flange Drawbar Eye: * Drawbar with friction-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V * LED rear lights 12 / 24 V integrated into underrun protection ----General Attachments: * Support winch at the front * Outward folding rear support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet - 3-way tipping body made of high-tensile fine-grained steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket bolted to front wall * Continuous side walls - without center stanchion - foldable with tailgate spring lift and pendulum-mounted via manual central locking * Bolt-on rear stanchions * Combination steel wing-door tailgate, asymmetrically split 2-leaf design, can swivel 270° and can be locked (not foldable), with additional swing frame for automatic tailgate opening during tipping, locking via galvanized locking rod and central lock, deactivation function for automatic tailgate opening when tipping backwards with wing door open * 4 mm steel floor * Two-step entry left in front area * Rear guide rail for loading ramps ----Load Securing: * 1 x 7 t lashing point in each corner * 4 x 3 t recessed lashing rings on each side in the outer frame ----Loading Ramps: * Recessed compartment for loading ramps at rear of chassis * 1 pair aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paint: * Chassis, drawbar, rear stanchions, front wall, tipping body, underrun protection, rear folding supports hot-dip galvanized * Side walls - KTL-coated - and tailgate painted in RAL 9010 pure white * Painting of side walls in any RAL color possible for an extra charge * Axles, air tank, flange drawbar eye, front support winch painted in black ----Information: * --Cargo securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler --, Daha fazla veri için: !, Daha fazla detay: ! Ppjdoyvlk Hopfx Aibsr

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear Ppedpfxsl Tihuo Aiber ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift Psdpsxptn Dofx Aibspr ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene) - Toplam ağırlık: 18.000kg / 20.000kg - Boş ağırlık: 4.360kg - Taşıma kapasitesi: 13.640kg / 15.640kg Diğer bilgiler - Çift lastikli 235/75R17,5 - Gigant akslar - 4 çift yük sabitleme halkası - PNömatik kilitleme sistemi - Alçaltılabilir döner şasi - Yaklaşık 2.300mm'lik rampa, saklama bölmesinde - Arka destek ayağı Podpfeyw Ep Sjx Aibjpr - Ekipman dolabı - Alt koruma

Koşul: ikinci el, azami yük ağırlığı: 17.290 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2017, bir sonraki muayene (TÜV): 07/2026, yükleme alanı uzunluğu: 8.900 mm, yükleme alanı genişliği: 2.520 mm, Donanım: ABS, * ABS Psdsyulu Ujpfx Aibopr * 5-odalı arka farlar * Turuncu döner uyarı lambası * Duomatik hava bağlantısı * BPW-ECO akslar ----Üst yapı: Alçak şasi römork, galvanizli şasi (1900+7000mm)/yaklaşık 900mm yükleme yüksekliği, arka kısmı eğimli/yaklaşık 770mm rampa yüksekliği, çelik/ahşap zemin, 3 metreye kadar genişletilebilir, kaymaz kaplamalı hidrolik katlanır rampalar (galvanizli), hidrolik olarak yana kaydırılabilir, sabitleme halkaları Satış yalnızca ticari işletmelere yapılmaktadır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER EKİPMAN VE AKSESUARLAR İÇİN GARANTİSİZ VERİLMİŞTİR. Tüm satın alma sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel şartlarımızdır (ayrıntılar için künyeye bakınız).

Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low Loader / Drive-Over Platform Trailer Ref. for inquiries: 27963, available end of March 2026 NEW VEHICLE including COC * GVW: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Platform version with 400mm high front wall, ramp locking with ramp holding rods and diagonal supports * Version with 21t GVW, reinforced frame and axle, axle spacing 1,810 mm * Platform height approx. 910 mm loaded / approx. 940 mm unloaded * Load area: 7,000 mm with 400 mm high front wall * Extended ramps: 3,000 mm, single-piece hot-dip galvanized ramps with galvanized grating, * Ramp lifting system with vertically mounted, adjustable springs for easy one-person operation * Load securing package (La-Si-Paket): * 4 x UVV-fall lashing rings (LC 8,000 daN) mounted in the existing 45° hole pattern in the outer frame, placed approximately 1 m from the front and rear cross members * 10 x UVV lashing rings LC 3,000 daN, recessed in the existing hole grid in the external frame * 2 UVV lashing rings each at the front and rear, recessed in the cross member, LC 10,000 daN * Additional lashing options with Ø 50 mm holes (LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Softwood (spruce/fir) floor, 50 mm thick * Gigant axles with air suspension including EBS 2S/2M * Lifting and lowering function * 235/75R 17.5 (8 pcs) twin tires with tire pressure monitoring sensors * 1 plastic toolbox positioned in driving direction right, in front of the front wall * LED lighting system * 7-pin socket at rear, pre-wired for long-load lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize load warning sign * 1 removable all-round LED beacon including holder and installation * Rear folding supports, front support foot with gear winch Pjdjyuq R Uepfx Aibepr ---- Hire-purchase example from our partner MMV Leasing: €655 net per month over 60 months term with no down payment and zero final value Other terms with/without down payment or residual value are possible! We are an authorized MüllerMitteltal dealer ---- * Our opening hours: * Mon-Thu: 08:00-17:00 * Fri: 08:00-15:00 * Outside these hours, we are available by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Koşul: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS * 5 odacıklı arka stop lambaları Podpfsyncyhox Aibspr * Yüksekliği ayarlanabilir çekici tertibatı * Gigant akslar * Ön destek makarası ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Ppjdpfx Aijq Dyvyeber ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Ppedpfxjpk Dv Re Aibor ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem • Lowloader • Platform Trailer Pedpeyndh Hefx Aibopr Immediate availability No. for inquiries: 11611 Delivery possible free to your address * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, dual wheels 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized headboard 400mm * Excavator bucket platform made from hardwood, bolted to the headboard * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifters with upright, adjustable springs for single-person operation * 4 UVV drop lashing rings (LC 6300daN) * Perforated outer frame (45°-folded with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm; fitting drop lashing rings LC 3000 daN at approx. 600 mm possible) with tight cross-members, high-profile head and tail sections, and rear entry slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN flush-mounted in the existing hole matrix in the outer frame, additionally * Additional lashing options through holes (Ø 50 mm, LC 1200 daN) in the head and end beams * Toolbox in front of the headboard * Side marker lights with indicator pulse * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable landing gear at front, folding supports at rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable; optionally with 50 mm eye available * 1 removable LED warning light at the rear---- * Leasing, hire purchase, financing, part exchange possible * e.g. 510 euros for 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 Outside business hours by appointment We speak German, English, Polish, French Leasing, financing, part exchange available

Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:  * 2 in 1 = suitable for roll-off containers and as a low-loader/platform trailer ---- Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: Ppodpfjl Tq Nmex Aiber * 2 x 10-ton axles ---- Suspension: * Air suspension with lifting and lowering function as well as RTR valve ---- Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment ---- Electrics / Lighting: * Tire pressure monitoring with display possibility in truck via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * 15-pin power connector ---- General Attachments: * Tool box made of powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container nets made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ---- Loading Area: * Main frame with raised outer rails for guiding roll-off containers * Steel sheet floor with recesses for rollers in the bogie area * Container length from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical plug-in end stops at the front in the guide track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip surface in the drive-on slope area * Mechanical drop legs at the rear ---- Load Securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead crossmember * 3 pairs of 10 t UVV lashing rings on the side outer frame * Each side with 4 x 2 t cloverleaf-style lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ---- Ramps: * 1 pair of aluminium ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ---- Paintwork: * Chassis, bogie, locking parts, and rear drop legs hot-dip galvanized * But the drawbar, axles, and air tanks painted in a shade of black ---- Information: * New vehicle, unregistered, with full manufacturer's warranty * Subject to errors and prior sale * Sample images ---- Delivery Time: * Available approx. from KW 23 / 2026

Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2 in 1: Suitable for roll-off containers and as a low-bed trailer ----Braking System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes Ppedpel Tpc Aofx Aibsr ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lifting and lowering function and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * Tyre pressure monitoring system with display in the truck via EBS signal – no installation required on the truck side * LED tail lights 12/24V * 15-pin electrical connector ----General Accessories: * Tool box made from powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made from galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic impact buffer * Foldable rear A-sign ----Loading Area: * Main frame with raised outer frame for roll-off container guidance * Steel floor with roller recesses in the bogie area * Suitable for container lengths from 5,500 to 7,000 mm * Pneumatic 4-point locking system and mechanically insertable stop angles at the front, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip surface in the ramp running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front wall cross member * 3 pairs of 10-ton UVV lashing rings on the outer frame * Each side features 4 x 2-ton cloverleaf-style lashing eyes * 4 x 8-ton lashing shackles recessed in the outer frame ----Ramps: * 1 pair of aluminium loading ramps (10.6 tons/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paint Finish: * Chassis, bogie, locking components, and rear drop supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in black ----Information: * New vehicle without first registration with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available approx. from calendar week 23 / 2026

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit Ppodpsrwc R Rofx Aibor ----Towing Bar / Flange Towing Eye: * Towing bar height adjustable by 300 mm * Towing bar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrical systems ----General Attachments: * Landing gear at the front * Fold-out rear support legs externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofit container lock fittings * 400 mm screwed flat steel front wall * Bolt-on stanchions at the rear * Drop sides with spring assistors ----Load Securing: * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various drilled holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front landing gear (support winch) * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead Ppedpfx Aisrwc R Aeber * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Pre-installation in front of the bulkhead for retrofitting container locks * 400 mm bolted smooth sheet steel bulkhead * Bolt-on rear stanchions * Sideboards with spring-assisted lifting ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings at 600 mm intervals * One 6.3 t lashing ring in each corner front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail along the central longitudinal axis for lashing up to LC 3000 daN ----Ramps: * Single-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible down to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 litres/min up to max. 140 litres/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 16/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing leg at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox front right, exterior of the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Side panels made from trapezoidal profile steel plate, foldable with sideboard assist spring * Rear wall made of steel, can be inserted between the ramps (bracket for storage provided inside in front of the bulkhead when not in use) * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity at 480 mm intervals * Optionally, installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each corner at the front and rear * Various bores in front and end crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical steel mesh ramps with spring-assist, suitable for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall * Sideboard color RAL 9010 pure white * Side panel paintwork in any RAL color available for an additional charge ----Information: * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: Pjdpfervvfljx Aibspr * Available from calendar week 08/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to total 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox mounted front right externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Pre-fitted for subsequent installation of container locks in front of bulkhead * Bolt-on smooth steel bulkhead * Side walls made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel tailgate, insertable between ramps (storage mount inside at front wall when not in use) * Removable rear stanchions, bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating ramps with spring assist for single-operator use, approx. 2,750 x 600 mm (can be compressed to within 20 mm) * Rear drive-up angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and tailgate * Drop side color in RAL 2011 deep orange * Painting of side walls in custom RAL color available at extra charge ----Information: Ppodpfx Aisxglibjbor * --Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring actuators ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down trapezoidal-profiled steel side walls with drop side spring assist * Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use * Bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear entry ramp angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall * Drop side color in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Podjq Dyvvepfx Aibopr * Available from week 08/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brake System: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm, total 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (tyre pressure monitoring system) * LED lighting ----General Equipment: * Jost landing leg at the front * Externally mounted, hot-dip galvanized rear folding supports * Plastic toolbox at the front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Fixture in front of the bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop sides made of trapezoidal steel sheet, foldable with drop side spring assists * Rear wall made of steel, retractable between the ramps – storage bracket when not in use in front of the bulkhead Ppjdpfxexglh Rs Aibor * Rear stanchions bolted ----Load Securing: * Perforated outer frame angled approx. 45° with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each corner at the front and rear * Various holes in front and rear crossmembers for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together down to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear panel * Drop side colour RAL 2011 deep orange * Optionally, side panels can be painted in any RAL colour at extra charge ----Info: * --Reinforced and certified bodywork according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to alterations and prior sale ----Delivery time: * available from CW 08/2026 (week 8/2026)

Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4: ----Braking system: Pjdjv Eq Evspfx Aibjpr * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS tire pressure monitoring system * 15-pin electrical connector * LED lighting ----General fittings: * Landing gear (support winch) at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm, front right, fitted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader platform: * 50 mm softwood flooring * Preparation in front of the front wall and at the rear slope for subsequent installation of container locks for transporting 20" containers * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, centre-split and foldable * Steel rear wall insertable between ramp brackets; can be stowed inside at front wall when not in use * Bolted rear stanchions ----Load securing: * Perforated external frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paint finish: * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye, and landing gear painted in black shade * Drop side boards painted RAL 9010 pure white * Side wall painting in an RAL color of choice possible at extra cost ----Information: * Reinforced and certified construction according to EN 12642 XL, incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex location Egestorf on the A7

Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizer assembly ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye Psdpfx Aijv D Tcbebopr ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support windlass at the front * Externally mounted folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall * Side underrun protection * Plastic quarter fenders ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the front wall and rear incline for retrofitting container locks for transporting 20" containers * Bolted front wall made of smooth sheet metal * Drop-side walls made of trapezoidal-profile steel sheet, foldable, split in the middle (1x) * Steel rear wall, can be slid in and stored between the ramp mounts or in front of the front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, angled at about 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t drop-type lashing rings every 600 mm * In each corner at front and rear, 1 x 6.3 t lashing ring * Various holes in the front and end cross members for 1.2 t lashing capability ----Ramps: * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear ramp angle approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paint Finish: * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support windlass painted in black * Sideboards painted in RAL 9010 pure white * Painting of side walls in RAL color of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex works Egestorf (A7 motorway)

Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık Ppsdpfx Ajwmpbdeibjr - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!