Kullanılmış Müller Mitteltal Ka-Ta-Rt 18,0 18 T Tandemkipper- Tieflader satın al (57.549)

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection Hsdpfx Acex Nlkaotsl ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Koşul: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower facility ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye Hedpfx Acjx Nlkgotjl ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck dashboard via EBS signal -no truck-side installation required- * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with hole pattern for lashings, lashing capacity per point 2,000 kg at a distance of 480 mm * Option for installation of 3,000 kg drop lashing rings at intervals of approx. 600 mm - delivery includes 12 each side, 3,000 kg lashing rings- * 5 pockets each side for stake posts 100 x 50 mm in the outer frame - stake posts are not included in delivery- * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum brackets, secured via container locks, with side forklift pockets, center/center 800 mm (width of pockets 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Internal width between support arms approx. 1,775 mm, with cross brace * Max. drum weight per support 6,000 kg * Without drive and drum brake * Support arm with locking device for securing drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in black shade ----Information: * Technical GVW upgrade to 30 t possible * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available from week 28/2026

Koşul: ikinci el, kilometre: 1.100 km, vites türü: diğer, renk: beyaz, toplam ağırlık: 32.000 kg, boş ağırlık: 6.600 kg, azami yük ağırlığı: 25.400 kg, lastik boyutu: 425/65R22,5, ilk tescil: 03/2016, süspansiyon: hava, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, first axle liftable, ABS (anti-lock braking system), underrun protection, landing gear Hsdpfsi Rk Axex Actel Superstructure: Liebherr concrete mixer model HTM 1004, approx. 10 m³, 2x 10t BPW axles! Suitable hydraulics for engine PTO on the towing vehicle available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips Hedpfxopk D Awe Actsl * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Koşul: yeni, azami yük ağırlığı: 18.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel plate (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel plate (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffer * Mechanical drop-down supports at rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-way container locking system and mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swiveling stop ----Load Securing: Hedpfx Acspk D Iiotel * 3 pairs of 10 t UVV lashing rings at the sides for the attachment of tensioning devices for positive and non-positive securing of the skips * 4 cloverleaf lashing eyes on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld seam as anti-slip surface in the running rail area of the ramp slope * 1 pair of aluminum approach ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from behind) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tank painted in a shade of black * Hot-dip galvanized main frame ----Notes: * Technically possible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: Hedpfxepk D Dqo Actel ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Hedpfx Ajndpn Soctel * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system * 15-pin electrical connector ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 14.900 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2010, bir sonraki muayene (TÜV): 05/2025, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.300 mm, Üretim yılı: 2010, Donanım: ABS, MÜLLER MITTELTAL RA18 Trailer for Hooklift Containers with External Rollers 5,500 mm – 7,000 mm German trailer, 2nd owner Technical Specifications: - Suitable for hooklift containers with external rollers, lengths 5,500–7,000 mm inner length, designed for rear loading. Weights: - Gross vehicle weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread remaining Features: - ABS/EBS socket according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer frame guides for containers, hot-dip galvanized - Container locking: The container is secured at 4 points by 2 pneumatic transverse locking units. After sliding the container on, the 4 locking claws are closed by actuating a valve, clamping the container to the chassis frame. Additionally secured at the front by 2 locking elements (with empty holders) that can be positioned as needed along the guide path. - 2 x 9-ton BPW 420 mm drum brake axles with air suspension units - Air suspension with lowering function - Frame: welded steel construction - Braking system: Dual-line brakes according to EU regulation EBS - DUOMATIC coupling head - Spring-loaded parking brake - 24 Volt electrical system - Multi-chamber rear lights Hedpfx Acevg T Nyetjl - 15-pin plug with connection cable - Lighting in line with EU regulations - Rims: factory silver - Underrun protection: aluminium profiles - Wheel chocks with holder - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Transfer/delivery available at additional cost. All information without guarantee! Sale only to businesses or for export! NOTE: PRICE IS NET PLUS VAT Language support: German, Czech, Polish, Romanian, Russian, English WhatsApp: Contact: Josef

Koşul: ikinci el, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540 STRAIGHT LOAD BED Container Locking System Unladen Weight: 8,000 kg German Inspection (HU): Due Gigant Axles with Drum Brakes Air Suspension Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4 Extendable to 3,000 mm with Lighting Drawbar – 50 mm Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm Support System Tyres: 235/75 R 17.5 Hjdpfxjtuhv Rj Actsl Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract. Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * Two SAF axles * First axle as lift axle (fully automatic) * Lift axle ride height +30 mm via actuator cylinder * Start-assist for shunting purposes and forced lowering on first axle activated via speed-dependent EBS electronics (no installation required on the truck side, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12/24V * 2 LED reversing spotlights switched with reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via rear lamp circuit ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Detachable pin towing coupling (use only with underrun protection retracted) * Enclosed plastic half-shell single fenders * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising space ----Hydraulics: * Twin-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operable via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial no. 100746129, year 2023) * Base frame made from high-tensile fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift controlled via remote control * Remote control with quick function for lowering, not for lifting * Emergency stop switches, left and right * Container supports with four pads per side and one roller at the rear on each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 mechanical drop-down supports at the rear * Rated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable the remote. The brake lines must remain connected to allow the hydraulically/pneumatically controlled valves to open. * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, and front landing leg painted in black * Palfinger hooklift painted in black/yellow ----Infos: * Errors and prior sale excepted * Vehicle is in very good / like-new condition Hodpsyfy Rrofx Actjl ----Container: Dimensions: * Load length: 5,500 mm * Load width: 2,300 mm * Load height: 1,000 mm Infos: * Mountings for hook systems avail...

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * Wabco EBS (Electronic Braking System) * RDÜ Tire Pressure Monitoring System * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Suspension with Tandem Equalizer Unit * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at front * 2 mechanical, hot-dip galvanized folding supports at rear * 15-pin electrical connector * LED tail lights * Hot-dip galvanized, bolted underrun protection * Galvanized steel toolbox, mounted right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous side walls with top inner tube reinforcement (without center stanchions), foldable with drop-side assist springs * Tailgate, foldable and pendulum-type, with manual central locking * Hot-dip galvanized, bolted rear stanchions * In each corner: 1 x 5 t lashing point; each side: 4 x 3 t lashing rings recessed in the outer frame Hsdpfxsl Th A Es Actol * 4 mm fine-grain steel floor plate * Mesh hooks, ramp take-up rail at rear * Prepared for subsequent installation of drop-side extensions * Superstructure reinforced, with load-securing certificate per EN 12642 XL * Two-step access on left side for easier entry * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at rear, recessed below the load platform in the chassis * Axles, springs, air tank, and landing gear painted in black * Chassis, drawbar, floor, front wall, folding supports hot-dip galvanized * New vehicle, unregistered, with manufacturer’s warranty * Tires: 385/55 R 22.5 * Drop side panel surfaces painted RAL 9010 pure white * Side panel surfaces paintable in any RAL color at extra cost * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanized folding supports * 15-pin power connector * LED tail lights * Hot-dip galvanized bolted underrun protection * Tool box made of galvanized sheet steel, right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel pallet three-way tipping body Hedov Dz N Nopfx Actsl * Continuous side walls at the top with internal tubular reinforcement without center stanchions, foldable with drop side spring lifters * Tailgate foldable and pendulum-mounted with manual central locking * Hot-dip galvanized, bolted rear stanchions * In each corner: 1 x 5 t lashing point, and each side features 4 x 3 t lashing rings recessed in the outer frame * 4 mm fine-grained steel floor plate * Net hooks, mounting rail at the rear for loading ramps * Preparation for later retrofit of side wall extensions * Reinforced superstructure with load securing certificate according to EN 12642 XL * Two-step entry on the left side as boarding aid * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear under the loading area, recessed into the chassis * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * New vehicle, unregistered, supplied with manufacturer's warranty * Tyres 385/55 R 22.5 * Side boards painted RAL 9010 pure white * Painting of side walls in any RAL color available for a surcharge * Subject to errors and prior sale * Immediately available ex works Egestorf

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via actuator cylinder * Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V Hjdpfex Dp Atox Actel * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Radio remote power supply 12+24 V via tail light ----General Attachments: * BPW landing gear front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium rims * Drop-in-pin towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the bulkhead, left side * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side * Enclosed side underrun protection can be used as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of the hooklift device via remote control * Remote control with fast function when unloading but not when loading * Emergency stop buttons on both left and right sides * Container saddle with 4 supports per side and 1 roller at the rear per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with main arm lifting * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized * Axles, air tanks, front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x SAF axles, rated at required tonnage * First axle configured as a lift axle (fully automatic) * Lift axle with ride height +30 mm via control cylinder * Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering via radio remote control ----Drawbar / Flange Towing Eye: * 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load ----Electric / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, actuated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12V + 24V via tail light circuit ----General Attachments: * BPW support winch at the front * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead, left side (direction of travel) * Shovel and broom holder in front of the bulkhead * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right * Enclosed side impact protection, usable as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Main frame constructed from high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift operation controlled by radio remote * Remote with fast function for unloading, but not for loading * Emergency stop switches on both left and right sides * Container supports: 4 lateral supports per side and 1 rear roller each side * Hydraulic rear internal locking Hsdpfxox Dp Agj Actel * 2 additional hydraulic cylinders to assist main arm lifting * 2 mechanical drop supports at the rear * Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open * Monitoring system for underride guard to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized * Axles, air tank, and front support winch painted in black * Palfinger hooklift painted in black / yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles, rated for high load * First axle configured as lift axle (fully automatic) * Lift axle travel height +30 mm via height-adjustment cylinder * Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flanged Eye: * 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light circuit ----General Equipment: * BPW manual landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel guards * Double access step, front left of the bulkhead * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side * Enclosed side underrun protection, suitable for use as advertising space ----Hydraulics: * Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation) * Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control ----Hooklift: Hedpfx Acox Dp Ametjl * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed from high-tensile fine-grained steel * 20,000 kg traction force * Hook height: 1,570 mm * Hooklift controls via radio remote * Quick function available for discharging, not for loading * Emergency stop button on both left and right sides * Container mounts: each side with 4 supports plus 1 rear roller each * Hydraulically operated rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at rear * Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves * Monitoring system ensuring underrun protection is retracted before tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized * Axles, air reservoirs, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Information: * Mounting brackets for hook s

Koşul: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Inquiry number: 11599 * NEW VEHICLE now immediately available in stock at Alsdorf * Versatile use: construction, landscaping, agriculture and forestry – can be used as tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * Tyres: 385/55 R19.5, (4 units), BPW axles, parabolic springs, drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload 8,750 kg. * EBS multi-voltage system for towing vehicles with 12 and 24 volt electrics (e.g., agricultural and forestry vehicles) * Side marking lights with integrated turn signal function * LED lighting system for 12+24 volts, with 1x 15-pin connection cable and an additional connection cable as standard, configuration 12 volt 13-pin with empty sockets for both electrical connectors * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded sidewalls, swinging, folding and removable, pre-fitted for later installation of sidewall extensions * Lockable compartment under the tipping body for loading ramps * Includes aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment beneath the tipper body * Front wall hot-dip galvanised * 4 UVV tie-down rings LC 5000daN front and rear + 8 recessed, folding tie-down lugs LC 3000daN in the tipper floor (centred) * Continuously height-adjustable tow bar, hot-dip galvanised, towing eye 40mm * Net hooks * Bolted, galvanised rear stanchions * ---- * We are a Müller-Mitteltal distributor! Request a quote from us! * Example: €519 net per month for 60 months, no down payment, no residual value. An offer from our finance partner FM LeasingPartner Hjdpeyhtwwofx Actjl ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Available outside business hours by appointment We speak German, we speak English, mowimy po polsku, on parle francais, WhatsApp Leasing, financing, trade-in possible----

Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: Hsdpfx Acjl Th Eyotol * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, front right side of chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks in the positions of the central locking mechanism plus 2 on the front bulkhead * Chassis made from fine-grained steel * Steel pallet 3-way tipper superstructure, continuous side panels with internal tube reinforcement – without intermediate posts, folding with drop-side spring lift * Removable bolted rear stanchions * Combined steel double-wing rear doors, asymmetrically split, can swing and lock up to 270° – not foldable – with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary latch at the rear and central locking, deactivation function for automatic tailgate operation when tipping backwards with open door * Each corner with 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes integrated in the outer frame on each side * 4 mm steel floor plate (fine grain steel) * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable rear compartment under the loading deck, built into the chassis for the ramps * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted in black tone * Tires 285/70 R19.5 * Side board paintwork RAL 9010 pure white Hodpfxel Th Hto Actel * Side wall paintwork available in RAL color of choice at additional cost * Vehicle is registered for one-day registration (never used) * Subject to errors and prior sale * Available immediately ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes Hodpfsl Th Dmsx Actsl ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right side at the front of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Screw-fastened underrun protection * Plastic quarter fenders * Net hooks located at the central locking housing and 2 pieces on the front wall * Chassis made of high-tensile fine-grain steel * Steel pallet tri-sided tipping body with continuous side walls reinforced at the top with internal pipes, without middle stakes, foldable with drop-side spring cylinders * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270° (non-drop-down), with additional swing frame for automatic tailgate opening when tipping, rear locking by galvanized rotary latch and central locking, deactivation function for automatic tailgate when tipping backwards with opened wing doors * 1 x 5 t lashing ring in each corner, plus 4 x 3 t lashing points recessed in the outer frame on each side * 4 mm steel floor made from high-tensile fine-grain steel * Rear mounting rail for loading ramps * Reinforced superstructure with cargo securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable compartment for ramps, accessible from the rear and recessed under the loading area in the chassis * Chassis, drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black Hedpfel Th Dusx Actjl * Tyres 285/70 R19.5 * Body painted RAL 9010 pure white * Side walls can be painted in any RAL color for an extra charge * Vehicle comes with day registration (without actual use) * Errors and prior sale reserved * Immediately available ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, 300 mm range, with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Plastic toolbox, approx. 750 x 350 x 300 mm, right-hand side * Bolted underrun protection * Plastic quarter mudguards Hedpfx Acotr Sucotel ----Chassis: * Main frame made of high-strength fine-grain steel ----Tipping Body: * Net hooks on the sides and rear in the central locking mounts plus 2 pieces on the front wall * 2-way pallet steel tipper body, fixed front wall of smooth sheet, continuous drop sides (without center stanchions, fold-down with sideboard spring assist) and swinging via manual central locking * Rear stanchions bolted * Steel rear wall inserted in front of the ramps * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings each side, recessed in the outer frame * 4 mm fine-grain steel floor ----Ramps: * Two-part mechanical steel grid access ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (can be manually telescoped to 80 mm overlap) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Drop sides and platform painted RAL 9010 pure white * Side wall and tipping body paintwork in any RAL color available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 07/2026

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026 Hedpfxotr St Uj Actjl

Koşul: yeni, azami yük ağırlığı: 8.620 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, *KA-TA-R 11.9:* Brakes: - Electronic Braking System (EBS) - Emergency release device for spring brake cylinders - Drum brakes Axle: - 2 x 5.5 t Gigant axles Suspension: - Parabolic springs with tandem equalizer unit Drawbar / Drawbar Eye: - Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange drawbar eye Electrics / Lighting: - Tire Pressure Monitoring System (TPMS) - 15-pin electrical connector - LED tail lights General Attachments: - Jost mechanical landing gear, front - 2 mechanical hot-dip galvanized folding supports, rear - Toolbox made of galvanized sheet steel, right side - Hot-dip galvanized bolted underrun protection - Toolbox made of galvanized sheet steel, right side - Plastic quarter mudguards Tipper Platform: - Mesh hooks on the sides and rear at the central locking mounts, plus 3 on the front wall - Hot-dip galvanized chassis - Steel pallet 3-way tipper body - Continuous side walls, foldable without center stanchions, with drop side spring assist - Tailgate foldable and swingable via manual central locking - Bolted hot-dip galvanized rear stanchions - 4 mm steel floor plate - Preparation for later retrofit of side wall extensions - Platform length: 5.5 meters Load Securing: - Each corner with 1 x 5 t lashing point - Each side with 4 x 3 t lashing rings recessed in the outer frame Ramps: - Mounting rail at rear for loading ramps - 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles - Lockable storage compartment under the load platform, integrated into the chassis from the rear Wheelbase: - Wheelbase: 990 mm Tyres: - Tyres: 235/75R17.5 Paintwork: - Axles, springs, air tank, drawbar, and landing gear painted in black - Platform body color: RAL 9010 pure white - Painting of side walls and tipper platform in a different RAL color possible at extra cost Hedpfxjm Angvj Actsl Information: - Reinforced body with EN 12642 XL load securing certificate - New vehicle without initial registration with manufacturer’s warranty - Subject to errors and prior sale Delivery Time: - Available immediately ex stock Egestorf (A7)

Koşul: yeni, azami yük ağırlığı: 8.620 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9: ----Brakes: Hsdpfjl Thx Esx Actsl * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem balance unit ----Drawbar / Flange Eye: * Hot-dip galvanized, height-adjustable drawbar (300 mm adjustment) with 40 mm flange towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General attachments: * Jost mechanical landing leg at the front * Two rear mechanical, hot-dip galvanized folding supports * Tool box made of galvanized sheet steel, mounted on the right side * Bolted hot-dip galvanized underrun guard * Plastic quarter mudguards ----Tipper body: * Mesh hooks on the sides and rear in the central locking mounts, plus three on the front wall * Hot-dip galvanized chassis * Steel pallet – 3-way tipper body * Continuous, fold-down side walls without central stanchions, fitted with drop-side spring lifts * Tailgate foldable and swinging, controlled via manual central locking * Hot-dip galvanized bolted rear stanchions * 4 mm steel floor plate * Preparation for subsequent installation of side wall extensions * 5.5-meter-long body ----Load securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * Rear ramp rails for loading ramps * 1 pair of aluminum ramps, approx. 3,310 x 400 mm (8 t capacity per pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the platform, integrated into the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Body paintwork: RAL 9010 pure white * Painting of side walls and tipper body in any other RAL colour available at extra cost ----Additional information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle without first registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf on the A7

Koşul: ikinci el, azami yük ağırlığı: 4.500 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/1979, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.900 mm, yükleme alanı yüksekliği: 380 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.000 mm, Üretim yılı: 1979,