Kullanılmış Müller-Mitteltal Tandem Tieflader Etü Ta R 11,9 satın al (55.664)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * EBS (Electronic Braking System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Height-adjustable drawbar, approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required)
* 15-pin power connector
* LED lighting
* Front support winch
* Rear external folding supports
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the front wall exterior
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood flooring
Kdsdpjl Thvxjfx Akqjp
* Fixtures in front of the bulkhead and rear for retrofitting 20" container locks
* Bolted smooth sheet metal front wall
* Side walls made of steel sheet – trapezoidal profile – center-folding, split 1x
* Steel rear wall, insertable between ramps, storage bracket inside front wall when not in use
* Bolted rear stakes
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t recessed lashing brackets every 600 mm – 4 lashing rings fitted on each side
* 1 x 6.3 t lashing ring fitted in each front and rear corner
* Profifix lashing rail, centrally aligned longitudinally for lashing up to LC 3,000 daN
* Various holes in front and end cross members for 1.2 t lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Rear ascent slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tank, drawbar eye, and support winch painted black
* Side wall paintwork in a customer-specified RAL color (excluding special or metallic paintwork), color changeable up to approx. 6 weeks before completion
* --Reinforced and certified body as per EN 12642 XL including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
* Available from approx. week 31 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, ETÜ-TA-R 19.0:
----Brake System:
* Wabco EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
2 x 10 t BPW Eco axles
----Suspension:
* Parabolic springs -110 mm wide- with tandem compensation unit
----Drawbar / Flange eye:
Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* 15-pin power connector
* LED tail lights
* RDÜ tyre pressure monitoring system
----General Attachments:
* Jost landing gear at the front
* Rear fold-out supports (external)
* Lateral underrun protection
* Quarter plastic mudguards
----Low-loader Platform:
Kdedpfx Ajl Th Hljkqjp
* 50 mm softwood floor
* Preparation in front of the front wall for retrofitting container locks
* Bolted smooth steel front wall
* Side panels made from trapezoidal-profiled steel, foldable with spring-assisted mechanism
* Rear steel wall, retractable between the ramps – holder provided inside in front of the front wall when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing rings every 600 mm
* In the corners at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear crossmembers for 1.2 t lashing points
* Central Profifix lashing rail along the longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Chassis, drawbar, front wall, rear wall, drive-on ramps and folding supports hot-dip galvanised
* Drop sides painted in RAL 9010 pure white
* Side panels can be painted in a RAL colour of your choice at extra cost
* Axles, springs, air tanks, flange towing eye and landing gear painted in black
----Information:
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0
----Brake System:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
Kdedpfx Aopk D Ncokqsp
* 2 x 11 t Gigant axles
----Suspension:
* Air suspension with manual lowering at the rear
----Drawbar / Flange Towing Eye:
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----General Fittings:
* Jost landing gear at front
* Fold-out stabilizer legs at rear
* Tool box made of galvanized sheet steel approx. 650 x 350 x 320 mm, mounted right side (powder-coated in black)
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis – loading height + 20 mm
* 50 mm softwood floor in clamped design
* Preparation in front of the front wall for later installation of container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal profile steel sheet, folding down with spring-assisted dropside lift
* Steel rear wall, insertable between ramps – storage bracket inside in front of the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* In the corners at the front and rear, 1 x 10 t lashing ring each; various holes for 1.2 t lashing options in the front and rear cross member
----Ramps:
* One-piece mechanical grating ramps with spring system for single-person operation approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
----Paintwork:
* Chassis, drawbar, front wall, tailgate, rear stabilizer legs, and ramps hot-dip galvanized
* Axles, springs, air tank, and landing gear painted in a shade of black
* Sideboard panels painted RAL 9010 pure white
* Painting of side walls in other RAL color available for surcharge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT3 3 Achs Tieflader mit ABS
Ara
Durum: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, , Müşteri aracı, , -- Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller --, Daha fazla bilgi için: !, Daha fazla detay: !
Kjdpfxszmd Rdo Akqjdp
Küçük ilan
Weißenfels
2.265 km
Açık dorseli römork
MÜLLER-MITTELTALZANDT TAT -B 110 Pritsche Tandem NL 9,4to
Ara
Durum: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT
Çok iyi bakılmış tandem platform dorse
ZANDT Cargo
* TAT B 110
* Platform
* Güçlendirilmiş ahşap taban
* Ağır hizmet tipi yük bağlama rayları
Kodpfjymuz Uex Akqedp
* 2 dingilli tandem
* Geniş lastikler
* Ayarlanabilir çekme oku
* Azami toplam ağırlık 11.900 kg
* Çok iyi durumda
Takas mümkün
%3,99'dan başlayan finansman
Hatalar ve ara satış hakkı saklıdır!
Bu ilandaki bilgiler bağlayıcı olmayan tanımlardır ve taahhüt edilmiş özellikler olarak kabul edilemez. Satıcı, yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir!
Almanya genelinde teslimat talep üzerine mümkündür
Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00
Cuma 09:00-14:00 ve randevu ile!
Küçük ilan
Weißenfels
2.265 km
Alçak şasi römork
MÜLLER-MITTELTALZANDT TAT -B 110 Pritsche Tandem NL 9,4to
Ara
Durum: ikinci el, azami yük ağırlığı: 9.400 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2020, yükleme alanı uzunluğu: 6.300 mm, yükleme alanı genişliği: 2.480 mm, Stok No.: ZANDT
Çok iyi bakımlı tandem platform römork
ZANDT Cargo
* TAT B 110
* Platform
Kdedjymuz Iopfx Akqjp
* Güçlendirilmiş ahşap zemin
* Ağır yük bağlama rayları
* 2 dingilli tandem
* Geniş lastikler
* Ayarlanabilir çekme oku
* Azami toplam ağırlık 11.900 kg
* Çok iyi durumda
Takas mümkündür
%3,99’dan başlayan finansman
Hatalar ve ara satış hakkı saklıdır!
Bu ilandaki bilgiler bağlayıcı olmayıp, taahhüt edilen özellikler değildir. Satıcı yazım veya veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir!
Tüm Almanya’ya teslimat talep üzerine mümkündür
Çalışma saatleri: Pazartesi-Perşembe 09:00-17:00
Cuma 09:00-14:00 ve randevu ile!
Küçük ilan
Reutlingen
2.331 km
Alçak şasi römork
MÜLLER-MITTELTALTandem Anhänger mit Rampen
Ara
Durum: ikinci el, azami yük ağırlığı: 4.500 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/1979, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.900 mm, yükleme alanı yüksekliği: 380 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.000 mm, Üretim yılı: 1979,
Küçük ilan
Bovenden
2.411 km
Alçak şasi römork
Müller-MitteltalETUE-TA 10, Ex Bundeswehr, wenig benutzt top
Ara
Durum: ikinci el, boş ağırlık: 2.700 kg, azami yük ağırlığı: 7.300 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2007, yükleme alanı uzunluğu: 5.020 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 400 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, mechanical ramps, front support legs, storage box, height-adjustable drawbar.
Ksdpfx Aowvikqokqodp
Body: Tandem low-bed trailer with mechanical drive-on ramps, 2 BPW axles, drum brakes!
Loading height approx. 930 mm!
Ramp length approx. 2,600 mm!
ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Küçük ilan
Bovenden
2.411 km
Brandalı açık römork
Müller-MitteltalMüller EAL-TA-P 10,5 Tandempritsche
Ara
Durum: ikinci el, boş ağırlık: 3.260 kg, azami yük ağırlığı: 7.240 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 2.600 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 3.750 mm, süspansiyon: hava, lastik boyutu: 245/70 R 19,5, renk: gri, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden. ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem, curtainsider, lashing rings, lift and lower function, through-loading system, height-adjustable towing bar.
Ksdpfji Rpxajx Akqjdp
Body: Through-loading via portal doors at the front, sliding mechanisms, tailgate with roller tarpaulin, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
Ara
Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9:
----Brakes:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assembly
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Towing Eye:
* Drawbar with 300 mm adjustable height
* 40 mm flanged towing eye
----General Attachments:
* Jost mechanical landing gear at front
* Externally mounted, hot-dip galvanized folding supports at rear
* Side underrun protection
* Plastic quarter mudguards
Ksdpfxol Thy Re Akqsdp
* Plastic toolbox, front right, mounted externally on the front wall
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED tail lights
----Cargo Area:
* 50 mm softwood floor
* 20" container locks mounted at front and rear
* Bolted smooth sheet steel front wall
* Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist
* Hot-dip galvanized, bolted rear stanchions
----Load Securing:
* Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side)
* One 6.3 t lashing ring in each of the four corners front and rear
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Rear access, storage compartment below loading platform integrated into the chassis
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall
* Dropside colour in RAL 9010 pure white
* Painting of sidewalls in an RAL colour at additional cost possible
----Information:
* New vehicle, unregistered
* Subject to errors and prior sale
----Delivery Time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 ton Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Eye:
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side
* 15-pin power plug
* LED lighting system 12 / 24 V
* EBS multivoltage system for towing vehicles with 12 and 24 V electrics
Kdsdpfxjrwc R Ro Akqep
----General Attachments:
* Support winch at the front
* Fold-out support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision for subsequent installation of container locks in front of the bulkhead
* Bolted 400 mm bulkhead made from smooth sheet
* Rear stakes bolted
* Side boards with spring-assist lifting
----Load Securing:
* Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm
* Installation of 3 tonne folding lashing rings possible every 600 mm
* Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring
* Various drillings in front and rear cross members for 1.2 tonne lashing option
* Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN
----Ramps:
* One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange-eye painted in black
* Side boards painted in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
----Info:
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brake System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flange Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12/24 V
* 15-pin socket
----General Attachments:
* Jost landing gear at front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Bed:
* 50 mm softwood flooring
* Fitting for retrofitting container locks in front of the front wall
* Bolted front wall made from smooth steel sheet
* Side walls made from profiled sheet steel, foldable with drop-side spring assistance
* Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use
* Rear stakes bolted
* Beveled rear drive-on angle approx. 860 mm
----Load Securing:
* Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 6.3 t lashing eye at each front and rear corner
* Various holes in front and rear cross-member for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm)
----Painting:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Drop-side color in RAL 9010 pure white
* Painting of side walls in a RAL color of choice available at extra charge
----Information:
* -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate --
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
Ksdeq Dyvyepfx Akqodp
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Ara
Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* RDÜ (Tire Pressure Monitoring System)
* LED taillights 12/24 V
* 15-pin electric connector
----General Attachments:
* Jost landing gear at front
* External hot-dip galvanized folding support legs at rear
* Plastic toolbox, front right outside on front wall
* Side underrun protection
* Plastic quarter mudguards
----Low-bed loading area:
* 50 mm softwood floor
* Preparation in front of bulkhead for later installation of container locks
* Bolt-on smooth steel front wall
* Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device
* Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead
* Bolt-on rear stanchions
* Rear approach angle approx. 860 mm
----Load securing:
Kdodpjpk Dv Rjfx Akqop
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Provision for fitting 3 t lashing rings every 600 mm
* In each corner at front and rear: 1 x 6.3 t lashing ring
* Various drilled holes for 1.2 t lashing points in front and rear crossmembers
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width)
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps
* Drop side color in RAL 9010 pure white
* Painting of side walls in a RAL color of your choice available at extra cost
----Info:
* --Reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Ara
Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Brakes:
* Wabco ABS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
Kdjdpfx Akjl Th Dmsqjp
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Tow Bar / Flange Drawbar Eye:
* Height-adjustable tow bar (+/- 150 mm)
* 40 mm bolted drawbar eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-plate
----Electrics / Lighting:
* 15-pin electrical connector
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made of 50 mm softwood
* 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions
* Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands
----Loading Edge:
* Unladen loading height approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized
* Axles, springs, landing gear, and air tanks painted in black
----General Information:
* Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Kdedpfox Dp Atjx Akqjp
* Duomatic brake coupling
----Axle:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via actuator cylinder
* Start-up assist for manoeuvring and forced lowering to the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, includes cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Towing Eye:
* 50 mm flanged towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary socket
* LED lighting system 12 / 24V
* 2 LED reversing lights, activated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connection cables for agricultural and forestry vehicles
* Radio remote power supply 12+24 V via tail light
----General Attachments:
* BPW landing gear front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium rims
* Drop-in-pin towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell individual mudguards
* Two-step access in front of the bulkhead, left side
* Shovel and broom holder in front of the bulkhead
* 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right-hand side
* Enclosed side underrun protection can be used as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right-hand side front) with operation via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023)
* Base frame made of high-tensile fine-grain steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Control of the hooklift device via remote control
* Remote control with fast function when unloading but not when loading
* Emergency stop buttons on both left and right sides
* Container saddle with 4 supports per side and 1 roller at the rear per side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with main arm lifting
* 2 x mechanical drop-down supports at the rear
* Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is outside the charging cradle, the service brake must be applied to enable wireless release. The brake connections must remain coupled in order to operate the hydraulically/pneumatically controlled valves.
* Monitoring system for underrun protection to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, step, underrun protection and drop supports hot-dip galvanized
* Axles, air tanks, front landing gear painted in black
* Palfinger hooklift painted black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Eye:
* Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye
----General Accessories:
* Jost mechanical support winch at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Body:
* Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall
* Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter)
* Rear stanchions bolted
* Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system
* Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing rings recessed into the outer frame on each side
Ksdpfol Thyxjx Akqedp
----Ramps:
* 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis
----Paintwork:
* Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized
* Side walls and tailgate painted in RAL 9010 pure white
* Painting of side walls in a different RAL color available at extra charge
* Axles, springs, flange eye, air tanks, and support winch painted black
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle, unregistered, with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Absetzcont.-Anh., Sonderpreis
Ara
Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4:
----Braking System:
* Wabco ABS braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar (+/- 150 mm)
* 40 mm bolted towing eye
----General Attachments:
* Jost landing gear at the front
* Side underrun protection
* Foldable rear A-shield
----Electrics / Lighting:
* 15-pin power connector
Kdjdpfsl Th Eysx Akqjp
* Multi-chamber tail lights
----Body:
* Fixed steel front and side walls
* Removable steel rear wall
* Floor made from 50 mm softwood
* 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each)
* Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear
----Loading Edge:
* Unladen loading edge approx. 710 mm
----Load Securing:
* 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs
* On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices
* 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg)
----Tyres:
* Tyres: 285/70R19.5
----Wheelbase:
* Wheelbase: 1,140 mm
----Paintwork:
* Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
* Axles, springs, landing gear, and air reservoir painted in black
----General Information:
* The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately ex Egestorf on the A7
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E brake system
Kjdox Dp Agspfx Akqjdp
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x SAF axles, rated at required tonnage
* First axle configured as a lift axle (fully automatic)
* Lift axle with ride height +30 mm via control cylinder
* Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering via radio remote control
----Drawbar / Flange Towing Eye:
* 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load
----Electric / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, actuated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12V + 24V via tail light circuit
----General Attachments:
* BPW support winch at the front
* Mechanically extendable underride guard for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Detachable pin-type towing coupling (use only with retracted underride guard)
* Enclosed plastic half-shell single mudguards
* Two-step access ladder in front of the bulkhead, left side (direction of travel)
* Shovel and broom holder in front of the bulkhead
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right
* Enclosed side impact protection, usable as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Main frame constructed from high-strength fine-grain steel
* 20,000 kg lifting capacity
* Hook height 1,570 mm
* Hooklift operation controlled by radio remote
* Remote with fast function for unloading, but not for loading
* Emergency stop switches on both left and right sides
* Container supports: 4 lateral supports per side and 1 rear roller each side
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist main arm lifting
* 2 mechanical drop supports at the rear
* Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open
* Monitoring system for underride guard to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized
* Axles, air tank, and front support winch painted in black
* Palfinger hooklift painted in black / yellow
----Information:
* Subject to errors and prior sale
* Vehicle is in very good / as-new condition
----Delivery Time:
* Vehicle is available immediately
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Ara
Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline"
Kdsdpfxsl Thyms Akqop
----Brakes:
* EBS braking system
* Emergency release mechanism for spring-actuated cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing leg at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS (Tire Pressure Monitoring System)
----Tipper Platform:
* Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall
* Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist)
* Bolted rear stanchions
* Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking.
* Deactivation feature for automatic rear tailgate when tipping backward with an open wing door
* 4 mm steel floor plate
* Ramp rack at rear for drive-up ramps
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame
----Ramps:
* 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment fitted underneath the loading area in the chassis
----Paintwork:
* Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized
* Sidewalls and tailgate: painted RAL 9010 pure white
* Other RAL colors for sidewalls available at extra cost
* Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, sold with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available immediately from Egestorf at the A7
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Ara
Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* 15-pin electrical connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General fittings:
* Support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm mounted externally to the right front bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fixture in front of bulkhead for subsequent installation of container locks
* 400 mm bolt-on smooth steel front bulkhead
* Bolt-on rear stanchions
* Drop sides with spring assist
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various holes in front and rear crossmember for 1.2 t lashing option
* Profifix lashing rail installed centrally in longitudinal axis for lashing up to LC 3000 daN
----Ramps:
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (can be collapsed to 20 mm gap)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front bulkhead, mechanical drop supports, and ramps galvanized
* Axles, springs, air tank, front support winch, and flange towing eye painted black
* Drop sides painted in RAL 9010 pure white
* Side walls painted in any RAL color at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Sample images
Kdsdpfx Aksrwc R Ajqsp
----Delivery time:
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALTandem- Stahl- 3- Seitenkipper mit Rollplane
Ara
Durum: yeni, azami yük ağırlığı: 13.410 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 11 m³, Üretim yılı: 2026, * KA-TA-R 18.0 ML
* Wabco EBS-E (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
* Tire pressure monitoring system with display capability in the truck’s dashboard via EBS signal (installation on the truck side not required)
* 2 x 9 t Gigant axles
* Air suspension with level control during tipping operation
* Drawbar with 50 mm flange eye (adjustable by +77 mm and -33 mm via offset plate)
* Jost landing gear at the front
* Foldable galvanized steel underrun protection for paver feeding
* Closed individual plastic fenders
* Standing platform at the front wall
* Manual roll-up tarpaulin
* 15-pin electrical connector
* LED tail lights with galvanized protective cover
* 2 LED reversing lights
* Chassis made of fine-grain steel
Kodpfx Ajxl Nkgjkqjdp
* Steel three-way tipper body (side walls with MM profile – continuous without central stanchion – side walls pendulum-mounted via manual central locking, left side foldable with wall spring assist)
* Roll tarp similar to RAL 7038 agate grey, with tarp tensioning by side ratchets and front and rear tensioning rubbers
* Front wall platform of grating with step at the drawbar and a hand grip on the front wall
* Tailgate made of HBW 400 steel, pendulum-mounted with automatic double claw lock
* 5 mm steel floor from HBW 450 steel
* Each side with 4 x 3 t recessed and foldable lashing rings – integrated in the steel floor
* Reinforced and certified structure according to EN 12642 XL including cargo securing certificate up to 19 t
* Side wall painting in a RAL color of your choice (excluding special or metallic paints) – color can be changed up to approx. 6 weeks before delivery
* Axles, air tanks, landing gear, flange towing eye painted in black tone
* Chassis, underrun protection and drawbar hot-dip galvanized
* New vehicle with full manufacturer’s warranty
* Errors and prior sale excepted
* Available from approx. week 44 / 2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.484 km
Skip loader römork
Müller-Mitteltal14,4 to. Tandem Absetzcont.-Anh., Sonder
Ara
Durum: yeni gibi (kullanılmış), azami yük ağırlığı: 14.400 kg, toplam ağırlık: 12.080 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 285/70R19.5, dingil mesafesi: 1.140 mm, römork freni: frenli römork, Üretim yılı: 2022, - ETM-TA 14.4:
- Wabco ABS braking system
- Emergency release mechanism for spring-loaded cylinders
- Drum brakes, 2 x 7 t Gigant axles
- Parabolic springs with tandem compensation unit
- Height-adjustable drawbar (+/- 150 mm) with 40 mm screwed towing eye
- Jost landing gear at the front, lateral underrun protection
- Foldable A-panel at the rear
- 15-pin electrical connector, multi-chamber tail lights
- Fixed steel front and side walls
- Removable steel rear wall
- Floor made of 50 mm softwood
- 1 sliding plate pad 750 x 1,000 mm in the front area incl. 2 removable skip stops at the front, each adjustable to 2 positions
- 4 interchangeable skip stops, adjustable to 2 positions each for lateral centering of the skips
Kedpfxoxvbcps Akqodp
- 1 UVV-compliant lashing point per side (13.5 t) for attaching tensioning elements
- 2 ratchet tensioners (spindle adjustment) with equalizer chain and quick shortener (tension force 6,300 kg)
- Rear crossmember for mounting aluminum loading ramps incl. 2 additional drop-down supports at the rear
- Unladen loading edge approx. 710 mm
- Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized
- Axles, springs, landing gear, air tanks painted black
- Tyres: 285/70R19.5
- Wheelbase: 1,140 mm
- Unladen loading edge: approx. 710 mm
- Hot-dip galvanized finish
- Vehicle has day registration from 06/2024, not loaded/used due to missing tire pressure monitoring system
- New vehicle with manufacturer's warranty
- Subject to errors and prior sale
- Immediately available from Egestorf off A7
Küçük ilan
Diespeck
2.278 km
üç yöne devirmeli römork
Müller-MitteltalKA-TA-R 18,0
Ara
Durum: ikinci el, boş ağırlık: 4.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 11/2009, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 980 mm, yükleme alanı hacmi: 12 m³, süspansiyon: hava, lastik boyutu: 385/65 R22,5, dingil mesafesi: 1.310 mm, renk: kırmızı, Donanım: ABS, Tamburlu fren
EBS (Elektronik Fren Sistemi)
Yük kapasitesi 13.300 kg
Çelik yan duvarlar
Sol tarafında menteşeli ve katlanabilir, kaldırma yaylı
BPW akslar
Kdedpfxszliu Ej Akqjp
Alt koruma, katlanabilir
Hatalar ve eksiklikler mahfuzdur.
Küçük ilan
Stuhr
2.555 km
Üç yöne devirmeli römork
MÜLLER-MITTELTALKA-TA-R 18,0 | Bordmatik*Stahl*1.Hand!*Trommel
Ara
Durum: ikinci el, azami yük ağırlığı: 13.450 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2014, bir sonraki muayene (TÜV): 05/2027, yükleme alanı uzunluğu: 4.950 mm, yükleme alanı genişliği: 2.370 mm, yükleme alanı yüksekliği: 900 mm, yükleme alanı hacmi: 10 m³, Donanım: ABS, * Üç taraflı boşaltma kasalı kamyon (Bordmatik sistemli)
* Gigant akslar
* Kampana fren
* ABS
* Hava süspansiyonu
* Destek ayağı
Kdsdpfx Aezkfguekqjp
Tüm bilgiler bağlayıcı değildir / Satışa sunulabilir.
Küçük ilan
Coppenbrügge
2.460 km
Damperli kamyon
Müller-MitteltalKA-TA-R 18.0
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2018, = Diğer seçenekler ve donanımlar =
- Arka havalı süspansiyon
- Ön havalı süspansiyon
= Açıklamalar =
Tandem damperli römork, 3 yönlü damper, iç ölçü yaklaşık 5.000 x 2.380 x 900 mm, gömme 8 bağlama halkası, yan paneller 900 mm alüminyum, sallanır ve katlanabilir merkezi kilitli, sol ve sağ yay asansörü, arka panel çelik, otomatik açılır şekilde sallanır. Ön panel platformu. SAF akslar, lastikler 385-65R22.5, EBS, havalı süspansiyon. Katlanabilir arka alt koruma, iki vitesli destek vinci, 50 mm çekme halkası, 1 hatlı hidrolik, 2 hatlı hava (Duomatik), 24 Volt. Azami toplam ağırlık 18.000 kg, taşıma kapasitesi 13.810 kg. Şasi gri, üst yapı yeşil. Muayenesi 06-2027 tarihine kadar geçerlidir. İyi durumda.
Kodpezh T Arjfx Akqjdp
= Diğer bilgiler =
Boş ağırlık: 4.190 kg
Yük kapasitesi: 13.810 kg
Toplam ağırlık: 18.000 kg
Ön lastikler: 385-65R22.5
Arka lastikler: 385-65R22.5
Üretim ülkesi: DE
Daha fazla bilgi için lütfen Jan-Marc Schwickert ile iletişime geçin.
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal tandem tieflader etü ta r 11,9"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.



























































































































































































































































































































































































































