Kullanılmış Eggers Hpt 18Zl / Tiefbett !!!! satın al (135)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLE3-Achs-Tiefbett 3x10 t Außenträger
Ara
Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Equipment excerpt. Full specification upon request.
Gooseneck:
* Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long
* Gooseneck hydraulically lift/lowerable and detachable
* For tractor units: 6x4 or 8x4
Lowbed:
* Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long
* Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking
* Supply lines are protected within the extendable beams and automatically adjust to the lowbed length
* 7 pairs of lashing rings foldable outward (LC 10,000 daN)
* 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings
Rear Undercarriage:
* Rear chassis with closed outer frame and checker plate cover
* Chassis with excavator trough, closed in the rear half to accommodate air tanks
* 3 pairs of lashing rings foldable outward (LC 5,000 daN)
* 1 pair of lashing rings foldable outward (LC 10,000 daN)
* 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN)
Axles:
* BPW axles and suspension, all axles hydromechanically forced steered
* Technical axle load: 12,000 kg each
Kjdpsy Uwu Iofx Ad Iolu
* Air suspension with lift and lower valve
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F)
Brake System:
* WABCO braking system in accordance with EU regulations with EBS-E (2S2M)
Paintwork:
* HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
* Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL
Including accessories:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanized connection bar at the front
* Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit)
* Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks
* Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings
* Electro-hydraulic power unit
* Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO)
* Yellow reflective tape to EU regulations on sides, extension and rear of the trailer
* At the gooseneck and rear, left and right, a bracket for warning signs including a socket
* Manual and description on USB stick
* Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps
* 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4
* 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
* On the gooseneck, a separate air connection with air gun
* 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally
Küçük ilan
Petershagen
2.512 km
Alçak şasi dorse
KÄSSBOHRERSLAR3 Tele Tiefbett Radmulden metallisiert
Ara
Durum: yeni, azami yük ağırlığı: 29.260 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.200 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.570 mm, Üretim yılı: 2025, Donanım: ABS, Kässbohrer SLAR3 Tele Lowbed with Wheel Recesses
Technical Data:
Model and Manufacturer:
* Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30
* Manufacturer: Kässbohrer
* Type: Extendable lowbed semi-trailer with wheel recesses, suitable for transporting vehicles and heavy machinery.
Dimensions:
* Overall length: 13,190 mm
* Gooseneck length: 3,950 mm
* Platform length: 9,240 mm
* Extension: 3,500 mm (Pe)
* Overall width: 2,550 mm (expandable by 600 mm via side extensions)
* Fifth wheel height: 1,250 mm
* Platform height: 875 mm
* Ramp length: 2,750 mm
* Ramp width: 850 mm
* Wheelbase: 7,800 mm
* Axle spacing: 2,260 mm
Weights and Load Capacities:
* Permissible total weight:
- 52,800 kg at 60 km/h
- 48,000 kg at 80 km/h
* Unladen weight: 12,744 kg ±3%
* Axle load capacity: 30,000 kg (10 tons per axle)
* King pin capacity: 18,000 kg
Axle Equipment:
* Number of axles: 3 (2 rigid front axles, 1 trailing rear axle)
* Lift axle: Manually adjustable, load-dependent (1st axle)
* Axle material: BPW axles with drum brakes
Tyres and Rims:
* Tyre size: 245/70 R17.5
* Tyre brand: GOODYEAR
* Tyre markings: M+S label and 3PMSF marking
* Tyre pressure monitoring system: Increases fuel efficiency and prolongs tyre life
* Number of rims: 12 steel rims with ET120 offset
Chassis and Suspension:
* Suspension: Air suspension with load gauge
* Brake system: Dual line air brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability control)
Lighting and Electrics:
* Lighting system: 24V, ASPÖCK multi-chamber lamps, LED side and rear marker lights
* Coupling type: Standard yellow/red for air supply connection
* Connections: NATO socket with 2 x 50mm² intermediate cables (3 m length)
Ramps:
* Ramp type: Foldable hydraulic loading ramps with sliding mechanism
* Capacity: 40 tons
* Ramp surface: Made from hardwood
* Safety: Ramp locking chain included
Load Securing:
* Lashing rings:
- 2 x 2 rings, each with 5,000 daN load capacity
- 1 x 2 rings with 10,000 daN load capacity on the gooseneck
- 4 x 2 lashing rings with 6,000 daN capacity in the well area
* Container lock housings: Suitable for transporting 1 x 20 FT or 1 x 30 FT container
* Plug-in stakes: 5 x 2 stakes (50 mm x 100 mm)
Special Features:
* Gooseneck: Equipped with 90° vertical corners, robust and durable
* Flooring: 45 mm thick hardwood and steel floor with chequered plate
* Wheel recess bridge: Bridges made from sectional hardwood with steel supports for covering the wheel recesses
* Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm
Colours:
* Chassis: Traffic red (RAL 3020) / also available in black
* Partial metallisation of contact surfaces
Condition: New and immediately ready for use.
* Perfectly suited for heavy haulage, construction applications, or machinery relocation.
Ksdpex Epaqsfx Ad Iolu
Küçük ilan
Eltmann
2.290 km
Diğer
ClarkHPT eco Handhubwagen
Ara
Durum: yeni, Üretim yılı: 2023, yük kapasitesi: 2.500 kg, renk: yeşil, Donanım: UVV güvenlik kontrolü, * Tandem rollers
* Rubber-polyurethane
The robust CLARK hand pallet truck HPT Eco is easy to operate and extremely reliable in use. With load capacities of up to 2,500 kg, these pallet trucks offer versatile applications in production, trade, and warehousing as well as in workshops. Thanks to their sturdy steel construction, the hand pallet trucks prove themselves even in demanding operations. The proportional valve allows the forks to be lowered smoothly and precisely, even with heavy loads. Additionally, the pallet trucks stand out due to their low unladen weight and high maneuverability, which is especially advantageous in confined spaces.
Kodpfxeyzm Hgs Ad Ijlu
All prices are subject to 19% VAT. Errors and prior sale excepted.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMegamax Tiefbett 2x12 t PA
Ara
Durum: ikinci el, azami yük ağırlığı: 36.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of vehicles, available immediately and at short notice, on our website.
Partial list of features. Full equipment details upon request.
Gooseneck:
* Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable
* Technical kingpin load: 25,000 kg
* Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Lowbed:
* Lowbed designed as a telescopic vessel bridge in low-profile construction, extendable at the front with mechanical locking
* Length x width approx. 6,850 mm x 2,540 mm
* Supply lines run protected in the extendable beams and automatically adjust to the current lowbed length
Axles and Suspension:
* PENDLE-AXLE
* All axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation
* Cylinders with automatic RESET function
* Hydraulic cylinders with shut-off valves and preload pins for securing in raised position
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* Tires: 245/70 R 17.5
* Rear chassis with closed external frame, checker plate cover, and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Brake System:
* Brake system: WABCO EBS-E in accordance with EU regulations, without connecting cables to the tractor unit
Paintwork:
* Trailer color: RAL 3002 Carmine Red
Kledpfex Uvllox Ad Iju
Included Accessories:
* Removable steel front wall, approx. 400 mm high
* 3 kW electric-hydraulic power pack for hydraulic operations (except hydraulic winches), supply line installation on the tractor unit not included
* Outer beams on the gooseneck with mounting holes for bolt-on lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring each left and right on the rear slope of the gooseneck (LC 6,000 daN)
* 2" king pin
* Locking point approx. every 500 mm on the extension
* 1 pair of steel ramps with climbing slats and locking pins for bridging the lowbed receiving hooks
* 1 lashing ring each left and right on the front crossmember (LC 10,000 daN)
* Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading deck
* Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading deck (LC 10,000 daN) on the top flange of the outer beams
* Cutouts above the lashing rings
* 1 hanging lashing ring each left and right outside on the rear crossmember (LC 10,000 daN) on the outer beams of the loading deck
* Preparation for removable loading floor
* Hanging bar at the front of the rear chassis for loose access ramps to the lowbed
* Chassis with beveled rear corners
* Hanging bar for loose aluminium ramps on the rear end traverse of the vehicle
* Remote steering from front and rear via cable remote control with push-buttons, with axle tracking control, without installation in the tractor unit
* Mechanical pin-latch coupling from lowbed to chassis for swapping loading platforms or installing extension beams, with electrical, pneumatic, and hydraulic couplings
* Round NATO socket at the front connector bar (Maeler & Kaege VG 96 917)
* 2 axle load gauges mounted on the left side
Including special accessories:
* 1 pair of removable aluminium side walls on the gooseneck, approx. 400 mm high, anodized finish
* A
Küçük ilan
Petershagen
2.512 km
Alçak şasi dorse
KÄSSBOHRERSLL 2/2H 2-Achs Tiefbett Hydraulische Lenkung
Ara
Durum: ikinci el, azami yük ağırlığı: 21.130 kg, toplam ağırlık: 34.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 11/2026, toplam genişlik: 2.540 mm, toplam yükseklik: 1.980 mm, Donanım: ABS, Kässbohrer SLL 2-axle low bed trailer with hydraulic steering
Highlight:
Optionally available for rent as a complete combination together with the truck shown.
Manufacturer: Kässbohrer
Model / Vehicle code: K.SLL 2 / 2H ? 18 / 20
Vehicle type: Low-bed semi-trailer
Country of registration: Germany
Brand: Kässbohrer
Chassis color: RAL 3020 Traffic Red
Dimensions & Weights
Overall length: 13,210 mm
* Total width: 2,540 mm
* Fifth wheel height (H5): 1,250 mm
* Platform height (unladen): 910 mm
* Platform height (laden): 300 mm
* Platform length: 6,810 mm
* Extension: 5,550 mm
* Gooseneck length: 3,600 mm
* Rear swing door: 2,100 mm
* Platform thickness: 200 mm
* Wheelbase: 10,530 mm
* Axle spacing: 1,360 mm
* Unladen weight: approx. 12,873 kg (±3%)
* Gross weight (40 / 60 / 80 km/h): 42,000 kg
* Total axle load: 24,000 kg
* Permissible kingpin load: 18,000 kg (40 / 60 / 80 km/h)
----Chassis & Axles
• 2 axles
• 2 hydraulically steered axles
• Axles: BPW
• Suspension: Air suspension
• Suspension travel: 260 mm (190 mm / -70 mm)
• Additional lifting of driving level by 40 mm available
• Load gauge for axle load display
• Semi-automatic centering of steered axles with warning light sensor
----Braking System
• WABCO EBS 2S/2M
• ABS (Anti-lock Braking System)
• RSS (Roll Stability Support)
• Brake system in compliance with UN ECE R13
----Electrical & Lighting
• 24V LED lighting system
• 2 × 7-pin + 1 × 15-pin socket
• LED brake lights
• LED rear and fog lights
• Electrical system according to UN ECE R48 & ADR
• LED work lights at the rear (2 pcs, reverse-dependent)
• LED beacon (1 pc)
----Tires & Rims
• Tire size: 245/70 R17.5
• Tires: M+S
• 3PMSF (suitable for winter)
• Tire pressure monitoring system as per R141
• Number of wheels: 9 complete wheels
• Rims: Steel rims (Kässbohrer selection)
• Spare wheel holder: 1 pc on gooseneck
----Steering & Operation
• Hydraulic steering for both axles
• Control panel inside vehicle
• Wireless remote control for external steering operation
• Multifunctional WABCO Smartboard
Kodpfx Adjycnbaj Ielu
• Axle load indicator
• Suspension control
• Tire and brake wear monitoring
• Breakdown & system monitoring
----Chassis & Frame
• High-tensile steel S700 MC (ISO 1726)
• Welded bogie-bed connection
• Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck
• Adjustable and detachable gooseneck
• 1 × 2 hydraulic cylinders, 220 bar operating pressure
• Kingpin: 2 inch, bolted
• Kingpin position: single position
----Platform & Body
• 3 removable platforms with hardwood flooring
• Dimensions per platform: 100 × 1,300 × 2,115 mm
• Weight per platform: 225 kg
• 2 lashing rings per platform with 8,000 kg tensile strength each
• Platform widening: 225 mm, galvanized
• Extension brackets: 12 × 2 pieces, galvanized
----Load securing
Lashing rings:
• 1 × 2 pcs, 13.4 t on gooseneck
• 7 × 2 pcs, 13.4 t
• 4 × 2 pcs, 8 t in the low bed
• 2 × 2 pcs, 13.4 t
• 3 × 2 pcs, 8 t on rear platform
Stake pockets:
• 6 × 2 pcs in pool (50 × 100 mm)
• 3 × 2 pcs at rear (50 × 100 mm)
----Attachments & Accessories
• Aluminum front panel gooseneck: 360 × 1,550 mm
• Aluminum side walls: 360 × 1,900 mm
• Aluminum rear wall: 360 × 2,480 mm
• Toolboxes right & left (500 × 350 × 400 mm)
• Central lubrication system
• Side underrun protection according to ECE R73
• Warn...
[Text truncated, please provide the remaining text for completion if needed.]
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Meusburger2-Achs-Jumbo-Tiefbett mit Planenaufbau
Ara
Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 27.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 235/75 R17.5, renk: gri, işletme ağırlığı: 11.000 kg, Donanım: ABS, Chassis:
- Welded steel frame construction with front and rear frame cranking and drop deck without rear bevel
- Frame neck + fifth wheel plate 225 mm
- Drop deck designed for a point load of 25 t over 5 m
- Outer frame closed outward with welded-in lashing rings for securing loads
- Interchangeable 2" kingpin
- Rear mounting rail for aluminum ramps
Axles and Tyres:
- BPW low-bed trailer axles, each with a 10 t axle load, air bag diameter 360 mm
- Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm)
- Wabco SmartBoard with ECAS function for two coupling heights +100 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- IVTM tire pressure monitoring system
- 9 tires 235/75 R 17.5, tubeless
Steering:
- 1st and 2nd axle hydraulically forced steered via fifth wheel coupling
Floor:
- Multi-layer bonded flooring, 27 mm thick, flush with outer frame and longitudinal beams
- Underside reinforced with GRP coating
- 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the drop deck as well as 1 pair each on the gooseneck and at the beginning of the rear unit – 2 pairs of 4 t lashing rings on both gooseneck and rear unit)
- 6 pairs of mushroom-type lashing points in the outer frame in the drop deck
- Storage compartment with lid in the front left and right of the drop deck floor
Front Wall:
- 25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning system
Sliding Tarpaulins:
- Sliding curtain both sides with welded-in vertical and horizontal straps (approx. 600 mm spacing) and stainless-steel tension locks
- Adjustable curtain straps (over-center) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener
- Curtain extension in driving direction: 300 mm, in height: 750 mm
- Incl. eyelets for loose curtain extension part
- 1 pair of vertical curtain pockets approx. 1,000 mm length, positioned in the drop deck at the front cranking
- With belt pockets
Rear Wall:
- Steel rear portal frame with side tarpaulin hook-in device
- Aluminum double-wing door, 25 mm thick
- Both door wings fully foldable with door retainer
- One aluminum double-joint hinge and two recessed grip recesses per door wing
Front Corner Posts:
- At roof height, bolted at the front end
Central Posts:
- 3 pairs of continuously adjustable folding stanchions
- Stanchions can be moved along the entire length via trolleys
- Central stanchions in the drop deck can also be fixed at the rear platform
Roof:
- EDSCHA sliding roof (galvanized) with crossbeams that can be shifted in both directions (pushed together to the front in the cargo area)
Klodpfx Adoiu Eu Ns Iou
- Rear portal cross member can be swiveled away
- PVC tarpaulin roof without customs seal
- Hand-operated hydraulic lifting roof on both sides, lift 450 mm
- Raised roof movable to the front (9x50) and rear (9x50) positions
- Including rear curtain extension and curtain skirt
- Roof can be cranked out at the very front on the bulkhead by 900 mm each
Accessories:
- Extendable warning boards (removable front and rear with socket) incl. position lights up to 4,000 mm loading width
- Storage for 4 warning boards on the front wall, top right and left inside
- 1 aluminum ladder with bracket, 2,500 mm long, mounted on the front wall
- 2 rows of self-locking aluminum slats
- Sheet metal fenders with mud flaps
- 1 night parking sign and 1 ADR panel on the rear wall
- Central lub
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMT 6-2+4-Achs-Tiefbett-Kombination
Ara
Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck:
- Gooseneck hydraulically liftable/lowerable and detachable
- Length approx. 3,650 mm
- For tractor units: 6 x 4 or 8 x 4
2-Axle Front Bogie:
- Hook pick-up at front and rear
- Chassis length x chassis width approx. 2,200 mm x 2,850 mm
Excavator Deck 'BB-A':
- Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width approx. 6,650 mm x 2,850 mm
- Beam height x beam width approx. 400 mm x 1,350 mm
- Loading height 550 mm with ground clearance 150 mm
4-Axle Rear Bogie:
- Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back
Ksdpfxowcmhaj Ad Iolu
- Bogie length x bogie width approx. 5,480 mm x 2,850 mm
- Numerous lashing points
Pendulum Axle and Tyres (Front and Rear Bogie):
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Burst hose valve on axle compensation cylinders with automatic reset function
- Hydraulic cylinders with shut-off valves and locking pins to secure in raised position
- Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres: 285/70 R19.5
Remote Steering:
- Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring
- Socket for remote steering operation on the gooseneck
- Cable remote control with push-buttons including single-track alignment monitoring
Included Accessories:
- At the galvanized connection bar at the front: yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks
- 3.5" kingpin
- One 7-pin socket at left and right rear of the gooseneck for warning signs
- Support bracket with winch for spare wheel at the front of the gooseneck
- Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings
- Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized
- Control lever on the gooseneck protected by a fold-down cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie
- Variomax tool kit
- Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up
- 2 spare wheels
- One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign
- Front bogie with separate air connection for air tools
- Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm
- Steel deck inserts can be placed in 2 positions to create a lowered loading area
- Steel mats with 12 mm thick rubber surface
- Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings
- One locking position every approx. 500 mm at the extension with mechanical lock
- Socket for cable remote control of the remote steering at the rear bogie
- 2 reversing lights on the rear panel
- Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light
- 1 work light left/right on the rear panel of the gooseneck with separate on/off switch
- Two INOX toolboxes approx. 855 x 340 x 390 mm
- 1-cylinder Hatz diesel engine (Silent Pack)
- Wireless remote control for the remote steering
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Kodpfx Adeh Hm Thj Ielu
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville3-Achs-Tiefbett-Pendelachsen-Bolzen-Laschenkupp.
Ara
Durum: yeni, boş ağırlık: 17.250 kg, azami yük ağırlığı: 48.700 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 17.250 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load platform length, approximately 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Suitable for tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly)
Low bed:
- Low bed with external beams, configured as a telescopic vessel bridge in low construction with extension at the front
- Length x width approx. 7,550 mm x 2,740 mm
- Mechanical locking of the extension
Chassis:
- Rear chassis with closed outer frame
- Tread plate covering and continuous prismatic excavator recess approx. 1,450/900 x 505 mm, open at the rear
Axles, Suspension, and Tyres:
- “PENDEL-AXLE”, all axles hydromechanically forced steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Final coating of axles with 2 layers of single-colour 2-component paint in "FAY-Grey-34-0260"
- Technical axle load 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres
Accessories:
- Detachable steel front wall, approx. 400 mm high
Ksdpfeh Hm Tzjx Ad Iolu
- 4 wheel chocks
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps with climbing strips and fixing bolts for bridging the low bed uptake hooks
- Ramps can be placed over or between the hooks
- Mounting points for steel loading ramps at the rear between the external beams of the gooseneck
- One locking position approximately every 1,000 mm on the extension
- 1 lashing ring each left and right on the front cross member
- Supply line connection strip to the tractor unit, fitted at the height of the outer frame profile
- 6 pairs of threaded blocks on the outside of the inner beams of the load platform for mounting screw-on M24 rings
- 6 pairs of recessed lashing rings on the outside of the outer beams of the load platform, foldable inwards and outwards
- 1 pair of threaded blocks at the front and rear of the outer beams of the load platform for mounting screw-on M24 rings
- Insertion strip for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps, brand BEKAMAX
- Remote steering from front and rear, operable via cable remote control, with single-track control of axles
- 3 kW electro-hydraulic power pack for operating hydraulic functions, except hydraulic winches
- Removable load floor (galvanised), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Loose widening boards, framed in steel
- 4 warning panels approx. 423 x 423 mm
- Radio remote control for remote steering operation
- 3.5" kingpin
- Anti-slip stickers on the left bevel of the gooseneck
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- Guiding plate from gooseneck for the fifth wheel plate, approx. 800 mm wide
- 1 spare wheel with mounting adapter
- Parking position on the gooseneck for warning panels when not in use
- 2 pairs of stanchion pockets recessed in the outer frame of the chassis for insertable stanchions approx. 100 x 50 mm
- Rear section of the chassis with a detachable plate closing the bucket arm recess at the rear
- Trailer colour MB 7350 Novagrau
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 2-Achs-Tiefbett mit Pendelachsen
Ara
Durum: yeni, boş ağırlık: 12.900 kg, azami yük ağırlığı: 34.100 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 350 mm, süspansiyon: diğer, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 12.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,750 mm long
- Gooseneck hydraulically height-adjustable and detachable
- Technical fifth wheel load: 23,000 kg
- Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
Loading Platform:
- Low bed with external beams in extendable "SUPER LOW" design, length approx. 6,850 mm
- Low bed with fixed hardwood floor approx. 40 mm thick and mechanical locking
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings foldable outward
- 1 pair of lashing rings lying in the trough
- 2 pairs of stake pockets for plug-in stakes (100 x 50 mm) in the outer frame
Pendulum Axle and Tires:
- "PENDULUM AXLE", all axles hydromechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and pre-insert to secure in lifted position
- Final coating of axles with 2 layers of single-color 2K paint, painted in "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires 245/70 R17.5
- TPMS (Tire Pressure Monitoring System) compliant with ECE R 141
Accessories:
- Prepared for fitting of bolted container locking positions for 1x 20ft or 1x 40ft container on the external beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel
- On the galvanized connection strip at the front: yellow-red air couplings
- 4 wheel chocks
- Remote steering front and rear operable via cable remote control with push buttons, including single-track monitoring of the axles
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of threaded couplings
- Electro-hydraulic unit
- White reflector tape on sides, extension and rear, according to EU regulations
- European reflector panels (red-yellow) at the rear of the trailer
- At the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket
- 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting of bolt-on RUD rings VLBG-4
- Removable ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized plug-in posts are removable (body length approx. 2,560 mm)
- Gooseneck at the upper rear area closed with a removable cover
Kledpfxohlz R Sj Ad Iju
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Fold-out extensions, approx. 230 mm per side
- 2 pairs of bolt-on RUD rings VLBG-4 M24 (LC 8,000 daN)
- 1 pair of steel ramps for bridging the low bed’s mounting hooks
- Sanded layer painted on the loading platform as an anti-slip coating
- Speed stickers 80 km/h on rear and both sides
- Rear chassis’ bucket recess at the rear closed with a plug-in plate
- Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm
- Radio remote control for the rear steering, in addition to the cable remote control, with indicator lights on the receiver as single-track monitoring
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determining axle loads
- HRM (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then all defined visible surfaces hot-finished in metallization with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 8-(3+5)-Achs-Tiefbett-Kombi.
Ara
Durum: yeni, boş ağırlık: 34.500 kg, azami yük ağırlığı: 106.700 kg, toplam ağırlık: 141.200 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 580 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 34.500 kg, Donanım: ABS, Gooseneck:
- Hydraulic gooseneck, height-adjustable and detachable
- Length approx. 3,650 mm
- Numerous lashing points
- For tractor units: 6x4 or 8x4
3-Axle Compact Front Bogie:
- Hook mounts at the front and rear
- Bogie length x width: approx. 3,560 mm x 2,850 mm
- Numerous lashing points
Excavator Deck "BB-A":
- Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and bolt-eye coupling at the rear
- Length x base width: approx. 7,150 mm x 2,850 mm
- Beam height x width: approx. 430 mm x 1,350 mm
- Loading height 580 mm with ground clearance of 150 mm
- 5 pairs of drop-forged lashing rings (LC 10,600 daN)
- 4 pairs of M30 threaded inserts on the inner beam for mounting bolt-on rings
5-Axle Rear Bogie:
- Mechanical bolt-eye coupling for mounting a lowbed at the front, rear cross member at the back
- Bogie length x width: approx. 6,840 mm x 2,850 mm
- Numerous lashing points
Pendulum Axles and Tires (Front and Rear Bogies):
- "PENDEL-AXLE", all axles with hydromechanical forced steering
- Hose rupture valve on equalizing cylinder with automatic reset
- Hydraulic cylinders with shut-off valves and safety lock pins for securing in raised position
- Axles finished with two coats of 2K paint, single-color MB 7350 Novagrau
- Technical axle load: 14,640 kg (62 km/h)
- Hydraulic axle compensation
Klodpfx Aewhywfod Iju
- Axle tools
- Tires: 285/70 R19.5
Remote Steering:
- Remote steering operational from front and rear via cable remote control with push-buttons, including axle tracking monitoring
- Socket for operating the remote steering on the gooseneck
- Cable remote control with push-buttons and axle tracking monitoring included
Accessories Included:
- Galvanized front connector bar with yellow-red air couplings
- Steel front wall approx. 400 mm high
- 4 wheel chocks with brackets
- 2 spare wheels 285/70 R19.5
- 3.5" king pin
- Gantry with winch for spare wheel on the front of the gooseneck
- Truck hydraulic connection with flow regulator (40 l/min), including gantry for suspending supply lines; tractor tank must have minimum capacity of 80 liters, complete with couplings
- White reflective tape to EU specs on the sides and extensions, red at the rear
- Plug-in ALU side and rear panels on the gooseneck, approx. 400 mm high, anodized
- Gooseneck operating lever protected by a folding cover
- Separate air connection with air gun on the gooseneck
- Central lubrication system BEKAMAX with multipurpose grease NLGI-2, 1x at the gooseneck, 1x at the 3-axle bogie, 1x at the 5-axle bogie
- Variomax tool kit
- Multi-couplings for hydraulics in the area of the lowbed hook mounts
- Front bogie with separate air connection for pneumatic tools
- Thread inserts (ø 40 mm) every approx. 500 mm on the external upper flange of the excavator deck for bolt-on rings
- Foldable extensions with steel decks, adjustable in width from approx. 2,850 mm to 3,250 mm
- Steel decks with approx. 12 mm thick rubber surface
- Two INOX toolboxes 855 x 340 x 390 mm
- Wireless remote control for remote steering in addition to cable control
- Slip-resistant sanded surface coating
- Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
Faymonville2-Achs-Tiefbett-Pendelach.-Bolzen-Lasch.
Ara
Durum: yeni, boş ağırlık: 12.800 kg, azami yük ağırlığı: 36.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.850 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 375 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 12.800 kg, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimized load bed length, approx. 3,750 mm long
- Gooseneck hydraulically lift/lowerable and detachable
- Technical fifth wheel load: 25,000 kg
- Suitable for tractor units: 4x2, 6x2, and 6x4
Load bed:
- Low bed with external beams, designed as a telescopic boiler bridge in low-profile construction with front extension
- Length 6,850 mm x width 2,540 mm
- One locking point approximately every 1,000 mm on the extension
Rear running gear:
- Rear running gear with closed outer frame with chequer plate cover and continuous prism-shaped excavator recess approx. 1,250/700 x 505 mm, open at the rear
Axles, Suspension, and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically steered
- Hose rupture valve on axle compensation cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and securing pin for safe retention in raised position
- Final coat of axles in 2-layer acrylic paint (2K), single color "FAY-Grey-34-0260"
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires: 245/70 R 17.5
- TPMS tire pressure monitoring system according to ECE R 14
- TPMS pressure sensors mounted in all wheels, including spares
Included accessories:
- Plug-in steel front wall, approx. 400 mm high
- 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches
- One spare wheel with mounting adapter
- Gooseneck outer beams with mounting holes for bolt-on lashing rings
- Removable ALU side panels, approx. 400 mm high, anodized, on the gooseneck
- One removable ALU rear panel, approx. 400 mm high, anodized, on the gooseneck
- Chequer plate cover over the gooseneck
- Gooseneck guide plate for the fifth wheel, approx. 500 mm wide
- Gooseneck operation lighting with on/off switch
- Hydraulic crossbeam to support the gooseneck on the tractor unit or a dolly
- 2" king pin
- Anti-slip sticker on the left chamfer of the gooseneck
- Gooseneck closed at the rear upper area with a removable cover
- 4 chocks with holders
Kljdpsvy Edcsfx Ad Iju
- Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings
- 1 pair of steel ramps with climbing strips and retaining bolts for bridging the reception hooks of the low bed
- The ramps can be placed above or between the hooks
- Mounting facility for steel drive-on ramps at the rear between the outer beams of the gooseneck
- Prepared for bolt-on container supports for 1x20ft on the outer beams
- Mechanical pin and strap connection from low bed to running gear for load bed exchange or installation of extension beams
- With electro-pneumatic-hydraulic couplings
- Outer beams of the low bed with integrated sand coating as anti-slip protection
- Removable loading floor (galvanized), can be inserted in 3 elements between the outer beams, with hardwood covering
- Folding extensions, approx. 230 mm per side
- Hook-in rail at the front of the rear running gear to the low bed for loose approach ramps
- 2 pairs of stake pockets recessed in the external frame of the running gear, for plug-in stakes approx. 100 x 50 mm
- Hook-in rail for loose ALU approach ramps on the rear cross member of the vehicle
- Central lubrication system with 2 pumps
- Remote control (radio and cable)
- 4 extensible warning signs approx. 423 mm x 423 mm
- Extensive lashing positions
Küçük ilan
Dortmund
2.568 km
Alçak şasi dorse
Doll2-Achs-Tiefbett-tera-Pendelachsfahrwerk
Ara
Durum: yeni, boş ağırlık: 13.850 kg, azami yük ağırlığı: 31.150 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, yükleme alanı uzunluğu: 6.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 300 mm, lastik boyutu: 245/70 R 17,5, renk: siyah, Donanım: ABS, Gooseneck:
- Hydraulically detachable gooseneck with external main frame, integrated steering disengagement, and individually operable push-off cylinders
- Integrated hydraulic cylinders and support arms for picking up and setting down the lowbed
- Line connections to the lowbed mounted inside the main frame in the offset section
- Mounting bracket for locking pins
Klodpfjy Dqkhsx Ad Iou
Lowbed, extendable:
- Frame pre-tensioned to match max. payload, reduced payload in telescopic extensions
- Prepared for the installation of load area widening devices
- Telescopic stages approx. every 500 mm + container positions
- 7 pairs of swiveling lashing rings, 13,400 daN lashing capacity
- 5 pairs of stake pockets 100x50 mm in the outer frame
- 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screw-in lashing shackles
- 1 pair of M36 threaded bushings inside the telescopic frame for screw-in lashing shackles
- Prepared for mounting container locks
- Adapter without bolt-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outside of the adapter; 1 pair on the inside
- 45 mm spruce timber floor between the flatbed frames
Running gear, drive-over design:
- Steel welded construction in short build design with open excavator trough at the rear
- Offset to the lowbed 90° with 2 pairs of holes at the front and rear of the running gear platform for attaching access ramps using securing pins
- Different track widths achievable via 2 different sets of holes
- Steel smooth plate with anti-slip finish welded over the axles, max. 5,000 kg axle load
- End beam with cut-outs for lighting, designed as underrun protection according to ECE R58-003
- Valves and electrical distribution installed protected in the intermediate floor
Axles, suspension and tires:
- Doll tera pendle axle technology with hydraulically suspended GIGANT pendle axles
- All axles 12 t, with ABS, AGS (automatic slack adjuster)
- All axles hydraulically forced-steered, max. 60° steering angle on the last axle
- Use of low-maintenance bearing points in the steering area
- All lubrication points connected to the central lubrication system
- Lift axle / jack function, all axles supplied with a locking pin enabling the axle to be lifted
- DOLL tera pendle axle with hydraulic suspension and damping elements
- Lift and lowering system with 600 mm total stroke (-70/+530)
- Hydraulic dual-circuit displacement steering
- Steering control mounted on a turntable at the fifth wheel
- Transfer of steering angles via a push-pull rod to the front sender cylinders
- The rear receiver cylinders transfer the front steering angles via solid steering rods to the steering axles
- All valves centrally mounted on a control block
- Axle load display via side-mounted manometer
- Steering pressure monitoring display
- Tire pressure monitoring system
- Tires: 245/70 R 17.5
Accessories included:
- Front wall made of steel with spare wheel holder, bolted, height 520 mm, hot-dip galvanized
- Side walls incl. rear wall, removable, approx. 400 mm high, anodized
- Two BEKAMAX central lubrication units
- DOLL Tronic CAN-Bus system
- Support arms for picking up and setting down the lowbed
- Fifth wheel plate with integrated steering disengagement, steering wedge, and 2'' kingpin for semi-trailer coupling
- Gooseneck cylinders for picking up and setting down the lowbed
- 6-way hydraulic coupling with relief valve for easy disconnection of hydraulic lines
- Duomatic air
Küçük ilan
Lübbecke
2.526 km
Konteyner taşımacılığı
Meiller18ZL 5,0 Abrollanhänger
Ara
Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2004, renk: gri, Üretim yılı: 2004, Donanım: ABS, - EBS
Kedpfoxukicox Ad Ielu
- Merkezi yağlama
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett Kombination ATX
Ara
Durum: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website.
Excerpt from the equipment list. Complete specification available on request.
Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4
Kjdpfx Adjw Tgp De Ielu
3-axle compact front bogie:
* Hook coupling at the front and rear. Length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Low bed:
* ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick
* Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear
* Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm
* Loading height approx. 480 mm with ground clearance of approx. 150 mm
5-axle rear bogie:
* Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* Pendulum axle
3-axle front bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
5-axle rear bogie:
* PENDULUM AXLE, all axles hydro-mechanically steered
* Hose rupture valve on the axle equalizer cylinder with automatic RESET function
* Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position
* Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paint finish:
* HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection
* Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system
Includes accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version
* 3.5" king pin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with a separate air connection for pneumatic tools
* BEKA-MAX central lubrication for a 3-axle bogie
* Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams
* Without container locks
* Brackets on the outer beams of the loading platform for attaching foldable extensions
* One 7-pin socket left and right, front and rear, on the rear bogie for warning signs
* BEKA-MAX central lubrication for a 5-axle bogie
* Socket on the rear bogie for the cable remote control for rear axle steering
* Rear bogie with trough
* 2 LED reversing lights mounted on the rear plate
* European reflective signs (red-yellow) at the rear
* One mudflap at the rear
* One LED beacon with bracket left and right on the end cross member
* Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck
* 1-cycle
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEGigamax Tiefbett 1+3
Ara
Durum: yeni, azami yük ağırlığı: 48.300 kg, toplam ağırlık: 71.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Excerpt from the equipment list. Complete specifications available upon request.
GOOSENECK:
* Gooseneck with integrated single-axle running gear (pendulum axle), removable design
* Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles
* Length: approx. 5,200 mm, with front chamfer approx. 60°
* Fifth-wheel load according to data sheet: W25-DSR2700-12/22.7
* For tractor units: 6x4 or 8x4
* Detachable steel front wall, approx. 400 mm high, with chamfered design
* 1 pair of mechanical supports at the front of the gooseneck
* ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets
* 1 spare wheel mount inside on the front wall of the gooseneck with bracket
* 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN)
* 2 pairs of recessed folding lashing rings in the outer frame of the front undercarriage (LC 10,000 daN)
* 1 pair of lashing rings at the transition from running gear to loading area (LC 10,600 daN)
* On the gooseneck, 1 pair of removable aluminium side walls, approx. 400 mm high, anodized finish
* On the gooseneck, one removable aluminium rear wall, approx. 400 mm high, anodized finish
* 3.5 inch kingpin
* TPMS tyre pressure monitoring system according to ECE R 141
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 1 INOX toolbox with single lid, mounted on the right in the direction of travel on the gooseneck next to the aluminium side wall, approx. 1,350 x 400 x 400 mm (L x W x H)
LOADING DECK:
* Low-bed with external beams, designed as a telescopic loading deck in low-profile design with a front extension, includes solid hardwood floor approx. 50 mm thick
* Length x width approx. 8,000 mm x 2,740 mm
* Mechanical bolt-lug coupling between low-bed and running gear for swapping loading decks or installing extension beams
* One locking position approx. every 500 mm in the extension
* 4 pairs of recessed lashing rings lying within the loading area, distributed along the outer frame/beams (LC 10,000 daN)
* 1 lashing ring each on the left and right of the rear cross member (LC 10,000 daN)
* Folding extensions, approx. 230 mm per side (WITHOUT wooden planks)
* Extension planks, loose, framed in steel
* Prepared for the installation of bolt-on container positions for 1x 20’ or 1x 40’ container on the outer beams. Container locks not included
* 6 pairs of threaded blocks between the lashing rings under the upper flange on the outer beam for mounting screw-on rings M24 (LC 8,000 daN)
* 2 pairs of screw rings M24 (LC 8,000 daN) included
REAR RUNNING GEAR:
* Rear undercarriage with closed outer frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear
* PENDULUM AXLE, all axles hydro-mechanically force-steered
Klsdpfx Aoyhkqnjd Iou
* Hose rupture valve on axle compensation cylinder with automatic reset function
* Hydraulic cylinder with shut-off valves and pre-locking pins for securing in raised position
* Final paint of axles in 2 coats of single-color 2K paint, DB 7350 Nova grey
* Technical axle load: 12,000 kg each
* Hydraulic axle compensation
* 245/70 R 17.5 3PMSF. Brand at our discretion
* Remote steering from front and rear via cable remote control, with single-track axle control, without installation in the tractor unit
* 4 pairs
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMegamax Tiefbett 2x10 t, Bolzen-Laschen-Kupplung
Ara
Durum: yeni, azami yük ağırlığı: 25.300 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment details available on request.
Gooseneck
* Gooseneck in SNT design for optimized deck length
* Length approx. 3,750 mm; gooseneck hydraulically liftable/lowerable and detachable
* Technical fifth wheel load: 25,000 kg. Suitable for tractors: 4 x 2 and 6 x 2
Tanker deck
* Low bed designed as extendable tanker deck in SUPER LOW design
* Length approx. 6,850 mm
* with mechanical locking
* Supply lines are protected in extendable beams and automatically adjust to the respective low bed length
Rear running gear
* In short version with closed outer frame and checker plate cover
* Running gear with excavator trough, this is closed in the rear section to house air tanks
Axles
* BPW axles and suspension, all axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
Tyres
* GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F)
Braking system
* Make: WABCO. EBS-E according to EU regulations, WITHOUT connection cable to the tractor unit
Kodov Sw E Aepfx Ad Ielu
Paintwork
* 6-coat treatment
* Complete steel structure shot-blasted after welding
* 1 layer zinc-based primer
* 1 layer adhesion primer. Final coating with 2 layers of 2K (acrylic) single-color paint, followed by cavity sealing with special wax
Trailer color
* RAL 3002 Carmine Red
* Rim color: Silver-grey
* Sidewall color: Natural Aluminum
Accessories included
* Plug-in steel front wall, approx. 400 mm high
* 3 kW electro-hydraulic unit for hydraulic operations, excluding hydraulic winches. Without installation of supply connections on the tractor unit
* Mounting adapter for 1 spare wheel in front of the gooseneck’s front wall
* Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm
* 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN)
* 2-inch king pin
* Hydraulic spreader beam for supporting the gooseneck on the tractor or a dolly
* Air connection with air gun on the gooseneck
* 1 pair of steel ramps with climbing strips and mounting bolts to bridge the low bed’s mounting hooks
* 1 lashing ring each left and right on the front cross member (LC 10,000 daN)
* On the outer beams of the loading area, provisions for removable load floor
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the inner beams of the loading area
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm outside on the outer beams of the loading area (LC 10,000 daN)
* Cutouts in the upper chord of the outer beams above the lashing rings
* Mechanical bolt-tab coupling from the low bed to the running gear, for deck replacement or installation of extension beams. With electro-pneumatic-hydraulic couplers
* Outer beams of the low bed coated with anti-slip sand layer
* 2nd driving height for upper driving position, max. ± 50 mm from normal driving position, without installation of controls from the tractor unit
* 1 pair of lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN)
* Chamfered front and rear a
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Ara
Durum: yeni, azami yük ağırlığı: 25.645 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of immediately and short-term available vehicles on our website.
Excerpt from the equipment - full specification upon request.
Loading area:
- Low-bed with central beam, extendable version, length approx. 6,750 mm
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the platform (LC 10,000 daN)
Gooseneck:
- Gooseneck hydraulically raisable/lowerable and detachable
Rear running gear:
- Rear running gear, short design, with closed outer frame and tread plate cover
- Running gear with excavator recess, rear half closed to accommodate air tanks
- 2 pairs of outward-folding lashing rings (LC 5,000 daN)
- 1 pair of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of horizontal lashing rings at the rear of the running gear (LC 10,000 daN)
Axles:
- BPW axles, hydro-mechanically forced-steered
- Air suspension with lift and lower valve
Tyres:
- Tyres 245/70 R 17.5 3PMSF
- TPMS: Tyre Pressure Monitoring System according to ECE R 141
Braking system:
- Wabco braking system according to EU regulations, with EBS-E (2S2M)
Klodpfxjxf Silj Ad Ieu
Paintwork:
- High-quality single-tone 2-component (2K) topcoat in RAL 3000 flame red
Including the following additional equipment:
- 2 king pins
- Galvanized steel front wall, height approx. 400 mm
- Remote steering override (front and rear) via cable remote control with pushbuttons, with axle tracking control (no installation in the tractor unit)
- Electro-hydraulic power unit
- Load manometer for axle load determination, incl. load diagram
- On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm)
- Separate air connection with air gun on the gooseneck
- 2 work lights with switches on the trailer, mounted on the gooseneck platform left and right
- 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck
- 6 pairs of stanchion pockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the loading area, 2 pairs in the outer frame of the running gear
- Galvanized extensions, extendable by approx. 230 mm per side
- Hydraulic lines from gooseneck to low-bed with multi-coupling instead of screw couplings (no guarantee on seals)
- Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, with removable pump cover
- 2 pairs of WADER container pockets in the loading area, for 1 x 20' container
- 1 removable galvanized intermediate platform with 1 pair of WADER container pockets
- 1 pair of steel ramps to bridge the pick-up hooks of the low-bed
- Sand coating on the loading area as slip protection
- HRM metallization (High Resistance Metallization)
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer 3+5 Tiefbett (Baggerbett)
Ara
Durum: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment specification. Complete equipment details available on request.
Gooseneck
* Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4.
3-Axle Compact Front Bogie
* Hook mounts at front and rear, length: approx. 3,560 mm
* Chassis width: approx. 2,850 mm
Excavator Deck
* Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm
* Loading height approx. 580 mm with ground clearance approx. 150 mm
5-Axle Rear Bogie
* Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear
* Chassis width: approx. 2,850 mm
* Chassis length: approx. 6,840 mm
* 3-axle pendle axle
Front Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle
5-Axle Rear Bogie
* PENDLE-AXLE, all axles hydro-mechanically forced steered
* Hose rupture valve on axle compensation cylinder with automatic RESET function
* Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position
Ksdpfsuvbdtjx Ad Islu
* Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray
* Technical axle load: 14,640 kg each (62 km/h)
* Hydraulic axle compensation
* Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J
Paintwork
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection
* Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey
Including Accessories
* Steel front wall, approx. 400 mm high
* Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish
* 3.5 kingpin
* BEKA-MAX central lubrication for one gooseneck
* Multi-coupling hydraulic connectors on gooseneck
* BEKA-MAX central lubrication for one 3-axle bogie
* One 7-pin socket left and right at rear of the front bogie for warning panels
* Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN)
* Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension
* Steel mattresses with rubber flooring, approx. 12 mm thick
* One 7-pin socket left and right, front and rear on rear bogie for warning panels
* BEKA-MAX central lubrication for one 5-axle bogie
* Socket on rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right
*
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x12 t PA
Ara
Durum: yeni, azami yük ağırlığı: 33.750 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete vehicle inventory, including units immediately and short-term available, on our website.
Extract from the equipment list. Full specification available upon request.
Gooseneck:
- Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- Compatible with tractor units: 4x2, 6x2, and 6x4
Lowbed:
- Lowbed with external beams, extendable SUPER LOW design, approx. 6,850 mm length
- Lowbed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking
- Supply lines protected within the extendable beams, automatically adapting to the lowbed length
- 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Rear Chassis:
- Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator recess, approx. 1,250/700 x 505 mm, open at the rear
- 2 pairs of lashing rings, foldable to the outside (LC 10,000 daN)
- 1 pair of lashing rings recessed in the trough, LC 16,000 daN
- 1 pair of lashing rings recessed in the trough, LC 10,600 daN
- 2 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame
Pendel Axles:
- Pendel axles, all axles forced steered by hydro-mechanical linkage
- Hose rupture valve on axle leveling cylinder with automatic reset function
- Hydraulic cylinders with shut-off valves and pre-insert for securing in the lifted position
- Axles painted with 2 layers of single-color 2-component paint in FAY Grey 34-0260
- Technical axle load: 12,000 kg each, with hydraulic axle compensation
- Axle tools
- Tyres: 245/70 R 17.5 3PMSF (brand at our discretion), load index (146/146F)
TPMS:
- TPMS tyre pressure monitoring system compliant with ECE R 141
Brake System:
- Wabco braking system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit
Electrical System:
- Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK lighting (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets, according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel Construction:
- Steel structure made of high-strength fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Coating:
- Complete steel structure is automatically shot-blasted after welding using a turbine blasting machine
Klodpfjxbmn Uex Ad Isu
- Second blasting treatment with corundum for optimum coating adhesion
- Full chassis metallized by HRM process with ZINACOR 850 (85% Zinc/15% Aluminium) for superior corrosion protection
- Final coating: two layers of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL
Including the following additional features:
- 2-inch king pin
- One galvanized steel headboard, approx. 400 mm high
- Remote steering from front and rear via cable remote with pushbuttons, axle alignment control (without installation in the tractor unit)
- Electro-hydraulic power unit
- 2 pairs of bolted container locks on external beams, including 2 pairs of container locks for 1 x 20' or 1 x 40' container
- On the gooseneck: detachable aluminium drop sides and rear wall, approx. 2,440 x 400 mm (LxH)
- Rear galvanized removable stakes
Küçük ilan
Kraków
1.721 km
Alçak platform
KässbohrerLB2 TIEF-BETT low loader semi-trailer /
Ara
Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 11.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, renk: kırmızı, Üretim yılı: 2022, Low-bed semi-trailer Kässbohrer LB2 TIEF-BETT / 16.5 m / Extendable semi-trailer / steering axles / 2 units
Year: 2022
Technical data:
Gross weight: 42,000 kg
Registered GVW: 38,000 kg
Unladen weight: 12,500 kg
Payload capacity: 29,500 kg
2 steering axles
BWP axles
Air suspension
Disc brakes
Remote control
Detachable front
Klodpfezb H Amox Ad Iou
Main deck length: 660 cm
Extendable deck length: 460 cm
Total main deck length: 1,120 cm
Rear platform length: 270 cm
Ride height: 40 cm
Width with extensions: 255 cm
Core width: 130 cm
Extended: 25 cm on each side
Special permits:
Vehicle width: 3.20 m
Distance from kingpin to rear of semi-trailer: 16.525 m
GVW: 38,000 kg
Permitted axle group load: 20,000 kg (1st axle – 10,000 kg; 2nd axle – 10,000 kg)
The semi-trailer is in excellent technical and visual condition.
Complete documentation.
2 identical semi-trailers available.
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Kraków
1.721 km
Yataklı Kabin & Düşük Yataklı Yarı Römork
MANTGX 28.510 6×2/ Kässbohrer LB2 TIEF-BETT
Ara
Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, kilometre: 350.000 km, güç: 375,1 kW (509,99 bg), yakıt türü: dizel, lastik durumu: 100 yüzde, dingil konfigürasyonu: 6x2, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 6, süspansiyon: çelik-hava, Üretim yılı: 2022, Donanım: AdBlue, hız sabitleyici, klima, MAN TGX 28.510 6×2 / Sleeper cab / Kässbohrer LB2 Low-bed semi-trailer / 16.5 m / steering axles / GVW 65 t
MAN TGX 28.510 6×2 / Sleeper cab / NEW tyres / GVW 65 t
Year: 2022
Mileage: 350,000 km
Technical specifications:
Gross vehicle weight: 26,000 kg
Gross combination weight: 65,000 kg
Curb weight: 8,774 kg
Payload: 17,226 kg
Engine power: 510 hp
Displacement: 12,419 cc
6×2 configuration
JOST fifth wheel
New tyres
Liftable third axle
Additional fuel tank
Rear air suspension
Sleeper cab with 2 beds
Air conditioning
Webasto heater
Automatic gearbox
Sunroof
Axle lock
Radio
Tachograph
Vehicle purchased and serviced at a Polish MAN dealership.
100% accident-free, full documentation, 1 owner.
Klodpfszb Htrjx Ad Iju
Excellent technical and cosmetic condition.
Kässbohrer LB2 Low-bed extendable semi-trailer / 16.5 m / Extendable semi-trailer / steering axles / 2 units
Year: 2022
Technical data:
Gross weight: 42,000 kg
Registered GVM: 38,000 kg
Own weight: 12,500 kg
Load capacity: 29,500 kg
2 steering axles
BWP axles
Air suspension
Disc brakes
Remote control
Removable front
Main deck length: 660 cm
Extendable platform length: 460 cm
Total main bed length: 1120 cm
Rear platform length: 270 cm
Driving height: 40 cm
Width with extensions: 255 cm
Core width: 130 cm (extended by 25 cm each side)
Special permits:
Vehicle width: 3.20 m
King pin to rear of trailer: 16.525 m
GVM: 38,000 kg
Permissible axle group load: 20,000 kg (1st axle: 10,000 kg; 2nd axle: 10,000 kg)
The semi-trailers are in excellent technical and cosmetic condition.
Full documentation.
2 identical semi-trailers available.
Küçük ilan
Sittensen
2.523 km
Roll-off dorse
HKMK 18 ZL 5.0, Kombi, Absetz/Abrollcontainer
Ara
Durum: yeni, azami yük ağırlığı: 13.890 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.180 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.220 mm, Üretim yılı: 2025, Donanım: ABS, Trailer for combined transport of roll-off containers or for up to 2 x 10 m³ skip containers, total container lengths 5,000 - 7,000 mm, unladen ride height approx. 1,150 mm, loading of skip containers from the front via towing bar with pneumatic lowering device, pneumatic container locking, 3 lashing points per side, ABS, EBS, 'Gigant' axle(s), disc brake system, air suspension with lift/lower function, twin tires, multifunction lights partly LED, LED side marker lights, Duo-Matic coupling head, storage box, side underrun protection, vehicle may be stickered and/or lettered with advertising.
K2671
Kljdpfx Adowadr Ds Ieu
Our offer does not include a new technical inspection (TÜV) by default. If a new TÜV inspection is required, we will gladly provide you with a quote from our partner workshops! Vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.
We would be happy to provide you with a finance or leasing offer for this item. Please feel free to contact us!
Küçük ilan
Plankenfels
2.242 km
Roll-off dorse
MEILLERK 18 ZL 5.0 Kombi Abroll-/Absetzanhänger
Ara
Durum: ikinci el, azami yük ağırlığı: 14.020 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2005, HKM Meiller K 18 ZL 5.0
Combination trailer for skip containers (Absetzmulden) and roll-off containers (Abrollmulden)
Kodpfxju Dd Nij Ad Ijlu
Unladen weight: 3,980 kg
Payload: 14,020 kg
Tyres: 265/70 R 19.5
Duomatic coupling
Twin tyres
Total trailer length: 9,770 mm
Significant corrosion!
Küçük ilan
Plankenfels
2.242 km
Roll-off dorse
HKMA 18 ZL 3,4 Absetzanhänger LL 1 Container TOP !!
Ara
Durum: ikinci el, azami yük ağırlığı: 14.750 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 01/2016, yükleme alanı uzunluğu: 5.150 mm, yükleme alanı genişliği: 1.760 mm, yükleme alanı yüksekliği: 1.150 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.220 mm, Üretim yılı: 2015, Donanım: ABS, HKM Skip Loader Trailer HKM A 18 ZL 3.4 for 1 Container MINI-CARRIER TRAILER
* Pneumatic low-tensioning device on both sides for skip containers with 2 container lashing chains
---
Permissible total weight: 18,000 kg
Unladen weight: 3,250 kg
Payload: 14,750 kg
Axles: 2
BPW axles
Air suspension
Disc brakes
Mudguards on all axles
Side underrun protection left and right
Rear underrun protection
ABS
EBS
Rear splash guards
Loading area (LxW): approx. 5,150 x 1,760 mm
Container bearing height (in driving position): approx. 1,150 mm
External dimensions: approx. 7,800 x 2,550 mm
Length without drawbar/tow bar: 5,450 mm
Air suspension without lifting and lowering device
40 mm towing eye
Mesh box
1x work light rear left
1x toolbox right
2x pneumatic low-tensioning devices on both sides for skip containers with 2 container lashing chains
Tyres: 265/70R19.5
Tread depth front left outer: 10 mm
Tread depth front left inner: 11 mm
Tread depth rear left outer: 10 mm
Klsdpswqyq Rsfx Ad Ieu
Tread depth rear left inner: 11 mm
Tread depth front right outer: 9 mm
Tread depth front right inner: 13 mm
Tread depth rear right outer: 13 mm
Tread depth rear right inner: 13 mm
Further description:
Suitable for skip containers up to max. 20 m³ according to DIN 30720
Rear end with robust underrun protection construction including integrated protection for light system via rubber buffer
DIN 40 towing eye
2 pairs of lashing eyes on the outer frame
Form-fitting skip container stops, longitudinally adjustable in the direction of travel (two positions)
Per container position, 1 pair of movable safety locks per side for different container bottom widths from 1,600-1,750 mm
Steel construction with two longitudinal beams
Surface designed as a container standing area in wear-resistant finish
With side impact protection
Turntable with low-maintenance ball-bearing slewing ring center beam - towing arm
Container stops
Lashing eyes and lashing strips
Pneumatic low-tensioning device on both sides for skip containers with 2 container lashing chains 6300 daN according to EN 12195-3
Plastic mudguards
1 wheel chock with holder
Connector cable to motor vehicle
Air suspension unit with two 10 t disc brake axles, BPW make
Two-line air brake according to EC guidelines
Central alignment
Brake system according to EC guidelines with EBS/ABS, RSS
Membrane brake cylinder and spring-loaded parking brake
Automatic slack adjuster
Connector cable with Duomatic coupling
Wheels and tyres: steel disc wheels in twin arrangement
24 V to EC regulation, multifunction lights, 15-pin plug connection
Toolbox
Mesh box
Reversing lights
Parking plates
A-board
Sizin için aramayı kolaylaştırıyoruz: "eggers hpt 18zl / tiefbett !!!!"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.








































































































































































































































































































