Kullanılmış Es-Ge Çalışma Platformlu Römork satın al (29.193)

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash guards * Contour marking tape on sides and rear, reflective * Folding lid (hot-dip galvanized) for tool box on the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electric plug * Four stake pockets on each side (no stakes present), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swiveling and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame; in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not on rear chamfer) Iaedpfx Aajx Ipb Hjaor * Widening planks stored in the middle of the loading area * Excavator arm storage above rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm storage) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable lateral ramp shift * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf on the A7

Durumu: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Iodpjv D Tbkefx Aaasar * Available from week 22/2026

Durumu: kullanılmış, azami yük ağırlığı: 30.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, Donanım: ABS, Kögel S24 Standart Platform Dorsesi, takılabilir dikme ve dikme yuvaları ile Iedsylfiyspfx Aaasar 3 dingil, havalı süspansiyonlu ve bir kaldırılabilir dingil, SAF dingiller, disk frenler, ABS. Taşıma kapasitesi: 30.240 kg Lastikler: 385/65R22.5

Durumu: kullanılmış, azami yük ağırlığı: 29.400 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2021, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 1.150 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.278 mm, Donanım: ABS, KRONE SDP 27 Building Materials Semi-Trailer – flawless, well-maintained, immediately available Vehicle Data * Vehicle type: SDP 27 eLSTB3-BS semi-trailer * Chassis number: WKESD00000959326 * Equipment number: F0959326 * Quantity: 2 units Weights * Permissible total weight: 36,000 kg * Technically permissible total weight: 39,000 kg * Permissible axle load: 24,000 kg Iajdpfjyq Ufhsx Aaaer * Technical axle load: 27,000 kg * Fifth wheel load: 12,000 kg * Unladen weight: approx. 6,600 kg Dimensions * Internal length: approx. 13,620 mm * Internal width: approx. 2,480 mm * Unladen coupling height: approx. 1,150 mm Chassis * 3 axles, each rated at 9,000 kg load capacity * Air suspension with disc brakes * Lift axle (1st axle), automatic control Tyres * 6 tyres, 385/65 R22.5 * 1 spare wheel available * Tread: M+S Superstructure * Steel front wall, 2,000 mm high * Aluminium side boards, 750 mm high, foldable/removable * Rear wall 750 mm high, foldable/removable * 30 mm waterproof floor (forklift axle load up to 7,000 kg) Equipment * LED lighting * Toolbox and storage box * Lashing rings and stanchions for load securing * Wide load plates and warning signs

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/1998, yükleme alanı uzunluğu: 4.300 mm, yükleme alanı genişliği: 2.400 mm, yükleme alanı yüksekliği: 850 mm, 2 Dingilli BlomenRöhr Platform Römork SDAH 8,5T İlk tescil: 06.1998 Üretici: BlomenRöhr Yaprak yay süspansiyon Lastik: 215/75 R17 Uzunluk: 6240 mm / Yükseklik: 2360 mm Muayenesiz (TÜV yok) Ekstra donanım, teknik veriler veya görseller talep üzerine sağlanabilir! Bilgiler taahhütsüzdür/hatalara açıktır! İnternette verilen bilgiler bağlayıcı olmayan açıklamalardır ve garanti edilmiş özellikler teşkil etmez. Satıcı, hata, giriş ya da veri iletim hatalarından sorumlu değildir. Değişiklik hakkı saklıdır. Sürekli alım-satım ile takas ve kiralama yapılır Iajdpsv Ridhefx Aaajr Belediye teknolojisi ile kanal temizliği için atık yönetimi ve temizlik araçları, sıvı ve tehlikeli madde taşımacılığı

Durumu: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Platform Bed: * EBS (Electronic Braking System) * Emergency release unit for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lowering system featuring RTR function * 1st axle liftable * Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (lockable from the tractor unit for shunting purposes—no installation required on the truck—allocated to pin 10 in the 15-pin connector, exclusively for maneuvering, not for public road use) * SmartBoard control box as info tool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, no installation required on the truck side * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate) * Mechanical support winch at the front, mechanical swing supports at the rear of the chassis * Hydraulic flow divider * Continuous side panels (without central stanchion) up to the approach slope * Folding rear stakes * Steel rear wall inserted in front of the rear stakes * Mechanically adjustable warning board package front and rear * Tool box made of galvanized steel sheet—black powder-coated—approx. 650 x 300 x 600 mm, right side * 15-pin power connector * LED taillights * Removable LED beacon including bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/douglas fir wood flooring * 400 mm steel front wall plugged in * Perforated outer frame, approx. 45 degrees angled with provision to fit 3 t lashing bracket Iaedpsr Dpzxjfx Aaaor * In each corner 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings mounted on each side * Various holes in front and rear crossmembers for 1.2 t lashing points * Hydraulic one-piece access ramps approx. 3000 x 720 mm, mechanically adjustable sideways * 4-way hydraulic control block for possible retrofit of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, and access ramps hot-dip galvanized * Axles, air tanks, flange towing eye, and front support winch painted black * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Subject to error and prior sale * Available from KW 13/2026 * Sample images (vehicle images may differ due to special equipment)

Durumu: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPM Tire Pressure Monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning panel packages front and rear * Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards * Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED rotating beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck) * Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to rear crossmember * Hardwood flooring on running surfaces of the low-bed platform * Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket * Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope) * Plank holders under the loading area, longitudinal alignment * Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp displacement * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof Iaedpfx Aajq Dyvcjaer * Two-line hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope) * Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension) * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 20/2026

Durumu: yeni, azami yük ağırlığı: 34.815 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 15.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.040 mm, Üretim yılı: 2026, Donanım: ABS, Kässbohrer SPA Mega Extendable HD Platform Trailer Immediately Available TECHNICAL INFORMATION: - Saddle height: 950 mm - Total length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm platform extension - Extension locking positions: every 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Overall width: 2,550 mm - Technical gross weight (80 km/h): 45,000 kg - Technical gross weight (60 km/h): 46,000 kg - Unladen weight: 10,185 kg RUNNING GEAR: - BPW axles with air suspension and disc brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension incl. load gauge - 1st axle liftable Iajdpfxsl N Syvj Aaaer - Wabco braking system - Tyres: 445/45 R19.5 - 1x spare wheel holder CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm hardwood flooring - 8x2 side extensions, extendable up to 300 mm - Telescopic landing legs at front with 50 t capacity - Mechanically folding support legs at rear with 45 t capacity RAMPS: - Ramp receptacles at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Container locks suitable for 1x20 ft, 2x20 ft, 1x40 ft, 1x45 ft - Front wall made of steel material, 1,700 mm with Code-XL certificate ACCESSORIES: - 1x stainless steel toolbox - Stake box at front wall - 2 x 2 over-width signs with LED lighting - Rotating beacon Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Durumu: kullanılmış, azami yük ağırlığı: 31.640 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2012, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 750 mm, Donanım: ABS, Krone SD Standard Platform with drop sides Stake pockets / suitable for telescopic stakes Payload: 31,640 kg Tyres: 385/65 R22.5 Iedju Dd Rmspfx Aaaoar SAF axles SAF Tire Pilot tyre inflation system Drum brakes Pallet box Loading area: 13,620 x 2,480 x 750 mm

Durumu: kullanılmış, toplam ağırlık: 2.000 kg, ilk tescil: 08/1995, Reklam brandaları için çerçeveli veya eşya taşımak için uygun römork Iedpfx Aoynvdmeaaoar Konum: Im Erlenkamp 15

Durumu: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem • Lowloader • Platform Trailer Immediate availability No. for inquiries: 11611 Delivery possible free to your address * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, dual wheels 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized headboard 400mm * Excavator bucket platform made from hardwood, bolted to the headboard * Deck height unladen 930mm / laden 870mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifters with upright, adjustable springs for single-person operation * 4 UVV drop lashing rings (LC 6300daN) * Perforated outer frame (45°-folded with hole pattern for lashing equipment, lashing capacity per point LC 2000 daN at a minimum distance of 480 mm; fitting drop lashing rings LC 3000 daN at approx. 600 mm possible) with tight cross-members, high-profile head and tail sections, and rear entry slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN flush-mounted in the existing hole matrix in the outer frame, additionally * Additional lashing options through holes (Ø 50 mm, LC 1200 daN) in the head and end beams Ijdpfxjyndh Hs Aaaear * Toolbox in front of the headboard * Side marker lights with indicator pulse * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable landing gear at front, folding supports at rear * Retrofitting of 2 container locks possible * Drawbar with 40 mm eye (hot-dip galvanized), height-adjustable; optionally with 50 mm eye available * 1 removable LED warning light at the rear---- * Leasing, hire purchase, financing, part exchange possible * e.g. 510 euros for 60 months term, no down payment, no final installment * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Fridays: 08:00 - 15:00 Outside business hours by appointment We speak German, English, Polish, French Leasing, financing, part exchange available

Durumu: kullanılmış, azami yük ağırlığı: 29.330 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2011, Donanım: ABS, Vehicle identification number: WMP2S0630BCBL4246 Unladen weight: 8,670 kg German MOT (HU) due Technical fifth wheel load (front): 18,000 kg King pin 2 inch – front swing clearance: 1,900 mm / rear swing clearance: 2,000 mm Technical axle loads rear: 2 x 10,000 kg BPW Eco Plus axles with disc brakes Axle 2 = STEERING AXLE (FORCED STEERING) Iedpfx Aaomn Ni Hjajar Dimensions: 13,800 x 2,550 mm Loading height: approx. 1,500 mm Width marker lights Container locks Stake pockets, including stakes Support legs Central lubrication system 4 x toolboxes 1 x steel storage compartment 1 x front storage box Central lubrication system Tyres: 425/65 R 22.5 Spare wheel holder WITH spare wheel Modifications, prior sale and errors excepted. The description serves for general vehicle identification and does not constitute a warranty in the legal sense of the purchase contract. Binding is the description in the purchase contract. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system Iaedpjq Dyvyefx Aaaor * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durumu: kullanılmış, azami yük ağırlığı: 28.050 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2006, bir sonraki muayene (TÜV): 02/2027, yükleme alanı uzunluğu: 13.630 mm, yükleme alanı genişliği: 2.480 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2006, Donanım: ABS, 3-axle Schmitz Cargobull SCS 24/L platform semi-trailer VIN: 040199 Chassis / Attachments: * Air suspension // raising and lowering * 3 x SAF axles with disc brakes * Tyres: 445/45 R19.5 * Remaining tread depth: F.~50% M.~90% R.~40% * 1x PVC box * Pallet box * Extension boards * Hot-dip galvanized Body: * Platform * Stake pockets on both sides * Heavy-duty lashing rings * L x W: 13.63m x 2.48m Weights: * Gross weight: 35,000 kg * Unladen weight: 6,950 kg * Payload: 28,050 kg Ijdpfsykfp Djx Aaajar Other information: * German vehicle * General inspection (HU)/Safety inspection (SP): 08/26 ---- New main inspections/safety checks or weight reductions/increases available on request. We are happy to assist you in obtaining export/temporary license plates, and can also arrange the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the marketing of new and used commercial vehicles. On 11,000 m² you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person to assist them throughout the process of buying or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you with organizing special transports. Day plates / export license plates We are happy to assist you in obtaining export/short-term license plates.

Durumu: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: Iaodpfxjq Euakj Aaaor ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durumu: yeni, azami yük ağırlığı: 36.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) Iaodpfeykx Nkex Aaasr * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Durumu: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: Isdpfoykx I Hex Aaajar * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durumu: kullanılmış, boş ağırlık: 8.450 kg, azami yük ağırlığı: 26.550 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2007, süspansiyon: hava, lastik boyutu: 385/65 R22,5, Donanım: ABS, Hangler platform dorse 3 dingilli | Yönlendirilebilir dingil | BPW dingiller disk frenli | Azami yüklü ağırlık 35.000 kg | Stepne tutuculu + stepne | Takım sandığı | 3 metre uzatılabilir | Lastikler: 385/65 R22,5 | Hata, yazım hatası ve ön satış hakkı saklıdır. Iodowz Ekkopfx Aaaear

Durumu: kullanılmış, azami yük ağırlığı: 22.450 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2008, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 12.620 mm, yükleme alanı genişliği: 2.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.710 mm, Donanım: ABS, Araç yolda. Yakında daha fazla fotoğraf ve detay paylaşılacaktır. * Baba cepli * 2. aks yönlendirmeli * Lastik ebatı: 385/65R22,5 * Tek. toplam ağırlık: 29.000 kg * Boş ağırlık: 6.550 kg * Toplam uzunluk: 12.870 mm * Dingil mesafeleri: 1.900 mm * SP süresi dolmuş * Araç numarası: 11807 * Hatalar ve ara satış hakkı saklıdır Iaodpeyl Rg Refx Aaaer * Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır Araç alımında ortaya çıkan tüm formalitelerde size memnuniyetle destek oluruz. Taleplerinizi ilettiğiniz takdirde, ihtiyaçlarınızla ilgileniyoruz. Ek ücret karşılığında aşağıdaki hizmetleri sunabiliriz: * Eski aracınızın takası * TÜV/SP muayenesi * Komple ihracat işlemleri * Finansman desteği sağlama * İhracat plakası temini * Araç nakliyesi * Araç tescili * Kurtarma ve araç taşıma VTS Ekibiniz

Durumu: kullanılmış, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2023, yükleme alanı uzunluğu: 13.590 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 1.200 mm, Donanım: ABS, VIN: W09SPLB2ZPEN10219 2-Axle Semi-Trailer HRD Type: SPLB2Z Platform semi-trailer with container locks Fifth Wheel Load: 12,000 kg Aggregate Load: 20,000 kg Warning signs for overwidth, extendable Steering: System: VSE ETS II, on both axles Axles / Suspension: Number / Capacity / Manufacturer: 2 x 10,000 kg, SAF Brakes: 17.5" drum brakes Suspension: Pneumatic with lift and lower function Axle lift: Not included Axle distance: 2,100 mm Wheel size: 235/75 R17.5" mounted on 10-hole steel rims Quantity: 8 Stainless steel storage boxes Locking positions: 6 pairs, suitable for the following positions: • 11,000 mm bridge rear-aligned • 11,000 mm bridge front-aligned • 2,400 mm bridge rear-aligned • 2,400 mm bridge front-aligned Load securing Lashing eye type: 50kN Vario (see appendix) Quantity + position: 11 pairs in the outer frame Lashing holes: Ø 32 mm in the outer frame, c:c approx. 400 mm Stake pocket positions: 8 pairs for stakes 81 mm x 51 mm in the outer frame Stake rows crosswise: 4 rows (positions to follow) Tyres Axle | Position | Dimension | Manufacturer | Model | Type | Rim | Tread Depth 1 | Left Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Left Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Right Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 1 | Right Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 11.0 mm 2 | Left Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Left Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Right Inner | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm 2 | Right Outer | 235/75R17.5 143/141K | Continental | HTR2+ | Steel | 10.0 mm Iasdpfx Aov T Hyfsaaor Export documents and insurance can be arranged on request for an additional charge! For export transactions, we can prepare the export declaration and registration for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding (mobile/WhatsApp) or Mr. Rohe! Please always make an appointment for inspection/test drive! Come and see us. We look forward to your visit. Disclaimer: The information provided on the internet is for information purposes only and does not constitute guaranteed properties. The seller is not liable for typing or data transmission errors, changes, input errors, or mistakes. Subject to prior sale!

Durumu: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment Isdpfx Astplwisaajar * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * Front: closed plastic mudguards; rear: straight galvanized steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Foldable (hot-dip galvanized) cover for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated in black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets on each side (stakes not included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions, recessed into the external frame at the corners (13.4 t), otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at rear chamfer) * Extension planks stored in a compartment under the loading area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) Iaedpfxjq Dyv Is Aaasr * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 ltr. up to max. 140 ltr./min.), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded deck height approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding outriggers, drop-down rear supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Durumu: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system Isdpfxol Th Hwj Aaaear * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalizer assembly * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at front * Rear foldable external support legs * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on flat steel bulkhead * Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist * Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Option to fit 3 t fold-down lashing rings every 600 mm * In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points * Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach wedge approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized * Body side walls painted RAL 9010 pure white * Side walls can be painted in any RAL color for an additional charge * Axles, springs, air tanks, flange eye and landing gear painted in black * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection Iedpfxel Thxde Aaasar * Swing-down supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each equipped with spray protection * Contour tape on the sides and rear, reflective * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets on each side (no stakes included) with lashing points * Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and recessed, loadable in all directions and integrated into the outer frame – 13.4 t load capacity in the corners, otherwise 10 t * Six pairs of mechanical folding outriggers for a total width of 3 m (not on the rear slope) * Extension planks stored in the center of the loading bed * Excavator boom support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom support) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * Four-section control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 18/2026

Durumu: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum stands ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck display via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (controlled via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Side-mounted stainless steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed Structure: * Zurr-fix outer frame, 45° bent with hole pattern for lashing means; lashing capacity per lashing point 2,000 kg with a spacing of 480 mm * Option to install 3,000 kg drop-down lashing brackets at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side in the outer frame for stakes 100 x 50 mm – stakes are not included in the delivery * 30 mm phenolic plywood floor ----Cable Drum Stands: * 3 galvanized cable drum stands secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * 6,000 kg drum weight per drum stand * Without drive and drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 locating rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of drums against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm Iodpox Nli Nsfx Aaajar ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Technical upgrade to 30 t gross vehicle weight possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 28 / 2026