İkinci El Meusburger 3-Achs-Tele-Semi Mit 1 Paar Radmulden Satın Al (62.208)

Durum: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and removable - For tractor units: 6x4 or 8x4 Psdeh Hm Thepfx Amberb Lowbed: - Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking - Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length Rear running gear: - Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear - 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame Axles and tyres: - “PENDLE-AXLE”, all axles forced-steered by hydromechanics - Burst protection valve on axle compensation cylinder with automatic RESET feature - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - 245/70 R 17.5 tyres / 3PMSF Accessories included: - Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams - 2'' king pin - One galvanized steel front wall approx. 400 mm high - One spare wheel with bracket - At the galvanized front connection strip: yellow-red air couplings - 4 wheel chocks - Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles - Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings - Electro-hydraulic unit - White reflector tape according to EU regulations on the sides, extension, and red at the rear - 2 wooden blocks 500x250x200 mm - European reflector plates (red-yellow) at the rear of the trailer - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease - Load pressure gauge to determine axle loads, including load chart - On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm - The rear galvanized plug-in posts are removable (body length approx. 2,120 mm) - Separate air connection with air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Gooseneck closed at the rear upper section with a removable cover - 1 pair of steel ramps to bridge the mountings of the lowbed - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform - Folding extensions, approx. 230 mm per side - Anti-slip sand layer painted on the loading platform - Dipper recess on the rear running gear closed at the front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)

Durum: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area with rear bevel approx. 1,000 mm x 8° - Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - Cut-outs in the outer frame of the loading area for attaching tensioning straps - Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Gear: Psdsunrapopfx Ambjrb - JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t) Axles and Tyres: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - TPMS tyre pressure monitoring system as per ECE R 141 - Tyres: 235/75 R 17.5 Paintwork: - Complete steel structure automatically blasted with shot blasting machine after welding - Second blasting with corundum for optimal coating adhesion - Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and painted RAL 9010 (Pure White) - Cavities sealed with special wax Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin Accessories Included: - Numerous lashing positions - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised front connection bar - 4 wheel chocks with holder on the front wall - Holder at the rear of the gooseneck for ALU loading ramps - Galvanised folding support legs under the rear bevel of the loading area - Holder for rotating beacon at the rear of the trailer - Galvanised, extendable widenings approx. 230 mm per side - White reflective tape to EU regulations on the sides, red at the rear - Holders for warning panels with socket at the gooseneck and rear crossmember, left and right - Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised stakes - 2 pairs of WADER container pockets in the loading area for a 20ft container - 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area - Movable mounting bar for ALU loading ramps at the rear of the vehicle - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel - Anti-slip sand coating applied to checker plates on gooseneck and loading area - Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light - Bracket for rotating beacon on the warning signs - 80 km/h speed stickers at rear and on both sides - European reflector panels (red/yellow) at rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)

Durum: ikinci el, kilometre: 1.001 km, ilk tescil: 01/1997, toplam ağırlık: 15.600 kg, renk: yeşil, şoför kabini: diğer, vites türü: diğer, yükleme alanı hacmi: 11 m³, yükleme alanı uzunluğu: 4.800 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 1997, Araç konumu: Bovenden, çelik şasi, sol tarafta yükleme platformu sistemi Şasi: Yaklaşık 11 m³ kapasiteli, sol tarafta yükleme platformu sistemi olan üç taraflı yük boşaltma kasası. Pjdpfsz Hl Hwjx Ambsrb AKSESUARLAR HAKKINDA BİLGİLER GARANTİ KAPSAMINDA DEĞİLDİR, değişiklikler, ön satış ve hatalar mahfuzdur!

Durum: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.100 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading platform length: 8,100 mm, loading height (laden) approx. 900 mm, 20 lashing rings rated at 10 t each, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), ramps laterally adjustable, spring assist for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking as per regulations, spring-actuated parking brake, vehicle hot-dip galvanized, Pedpfx Aez Hak Rsmbsrb Surcharges for: - Warning panels with lighting and beacon = Price: €800 - Widening to 3 m = Price: €1,100 - Hydraulic one-piece ramps = €500 Also available with 9 m loading platform length and widening in stock. -- Subject to misprints, errors, and changes. Sample images -- More data at: ! More details: !

Durum: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Prjdow Tpq Depfx Ambeb - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durum: yeni, azami yük ağırlığı: 96.500 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 26.900 mm, toplam genişlik: 2.750 mm, Donanım: ABS, Our complete range of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * For tractors: 6 x 4 or 8 x 4 * Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspension of supply lines. The tractor's tank must have a minimum capacity of 80 L * With MAX Trailer couplings, otherwise coupling parts to be supplied ex works by the customer * Gallows with winch for spare wheel located at the front of the gooseneck * 3.5 inch kingpin * Steel front wall approx. 400 mm high * Plug-in aluminium side and rear boards for the gooseneck, approx. 400 mm high, anodized finish * Operating levers on the gooseneck protected by a foldable cover * Illuminated controls at the gooseneck, with on/off switch * One 7-pin socket left and right at the rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for a gooseneck using standard grease NLGI-2 * Hydraulic couplings from gooseneck to lowbed deck with screw-type couplers * Access steps to the gooseneck * Four warning panels extendable approx. 1,000 mm, approx. 423 x 423 mm, with one LED marker light and bracket for rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3,000 rpm * Hydraulic connection lines between the power pack and the connector plate at the gooseneck * One LED work light left and right at the rear plate of the gooseneck with separate on/off switches * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of steering, in addition to cable remote control, with 2 LED indicators on the receiver for single-track monitoring. - Operation of raising/lowering the gooseneck. - Operation of raising/lowering suspension of running gear. 2-Axle Front Bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm; bogie width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 (not connected to the tie rods) * One 7-pin socket left and right at the rear of the front bogie for warning panels * Bogie surface finished with painted-in sand coating for slip-resistance * Yellow reflective tape according to EU regulations on the side, at extension and at the rear of the trailer * One 7-pin socket for warning panels, left and right at the front bogie, in the axle area * Extendable extensions of approx. 230 mm per side for a 2-axle bogie * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for warning panels to be inserted into the stake pockets on the outer frame of the load bed Psdpfx Amozahp Sjbjrb Load Bed: * 6-axle, double telescopic load bed with pin-eye coupling at the front and a rear bevel of approx. 500 mm x 8° * Load bed length: approx. 11,000 mm * Technically extendable by approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Standard width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the load bed with standard grease NLGI-2 * Load bed surface finished with painted-in sand coating for slip-resistance * 11 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * Permanently welded intermediate platform, approx.

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 5.500 kg, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 23.000 kg, dingil konfigürasyonu: 1 dingil, yükleme alanı uzunluğu: 13.300 mm, süspansiyon: hava, renk: sarı, Üretim yılı: 2023, Donanım: ABS, Eroğlu Alçak Platform / 2023 / 13,3 m Model Yılı: 2023 Teknik Veriler Brüt Ağırlık: 23.000 kg Ağırlık: 5.500 kg Yük Kapasitesi: 17.500 kg Toplam Uzunluk: 13,3 m 1 adet SAF aks Pnömatik süspansiyon ABS Prsdpjz E Nv Hofx Ambjb Hidrolik olarak uzatılabilen rampa Hidrolik vinç Teknik ve görsel durumu çok iyi. Römork kayıtlıdır.

Durum: ikinci el, azami yük ağırlığı: 29.574 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2020, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 7.440 mm, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.500 mm, yükleme alanı hacmi: 26 m³, toplam uzunluk: 8.785 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.050 mm, Donanım: ABS, * 2 adet kaldırma aksı (1+3) Prodpfx Ajz Dzq Hembsb * Çelik kasa * Örtü brandasıyla birlikte platform * Geri görüş kamerası * Hava süspansiyonu * Disk frenli Schmitz akslar * Wabco SmartBoard ünitesi * Otomatik seviye ayarlaması * Alüminyum merdiven ----* Lastik ölçüsü: 385/65R22,5 * Teknik toplam ağırlık: 39000 kg * Boş ağırlık: 6426 kg * Toplam uzunluk: 8785 mm * Muayene geçerlilik tarihi: 06.2027 ----Araç numarası/Vehicle: 12499----Hatalar ve ön satış saklıdır----Reklamlar ve çeşitli yazılar dijital olarak kaldırılmıştır.-----Bir araç satın alırken ortaya çıkan tüm resmi işlemler için size her türlü konuda yardımcı olmaktan memnuniyet duyarız. İhtiyaçlarınızı ve önerilerinizi bize bildirin, biz de gerekenleri yaparız. Örneğin, ek ücrete karşılık size aşağıdaki hizmetleri sunabiliriz:----Eski aracınızın değerleme yoluyla alınmasıTÜV/Muayene işlemleriTamamen ihracat işlemleriFinansman sağlanmasıİhracat plakası başvurusunun yapılmasıAraçların taşınmasıAraçların ruhsat işlemlerinin yapılmasıAraç kurtarma ve nakliye hizmetleri----?SİZİN VTS EKİBİNİZ

Durum: yeni, boş ağırlık: 13.250 kg, azami yük ağırlığı: 47.550 kg, toplam ağırlık: 60.800 kg, dingil konfigürasyonu: > 3 aks, süspansiyon: hava, lastik boyutu: 245/70 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear taper approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Podpfxol Uxdko Ambjrb Extendable loading platform: Extendable loading platform with rear taper approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of horizontal lashing rings at the front of the loading platform Cutouts in the outer frame of the platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate over the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding ramp sections, hydraulic lift mechanism, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with two-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Brake system: Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel structure: Steel structure made of high-strength fine-grain steels Steel qualities: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer High-quality two-component (2K) topcoat in single-tone Nova Grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint possible Electrical system: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings at the galvanized front connection bar 4 wheel chocks with holder at the front wall One spare wheel with holder in front of the front wall Electro-hydraulic unit Remote steering front and rear via cable remote control with push buttons and single-track axle alignment control Mount for ALU loading ramps at rear section of the gooseneck European reflector boards (red-yellow) at the rear of the trailer White reflector tape as per EU regulations on the side, extension and rear Red at the rear At the gooseneck and ramps, one holder left and right for warning signs including socket Beacon holder at the rear of the trailer Galvanized folding support legs under the rear ramp of the loading area Control valves for ramps located on the right side of the trailer Cover plates to bridge the gap between ramp and loading platform One mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with standard NLGI-2 grease and removable protection for the pump Plug-in ALU side and rear walls on the gooseneck approx. 2,440 x 400 mm Rear galvanized plug-in posts are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil fill plug 4 pairs of WADER container locks in the loading area for a

Durum: yeni, azami yük ağırlığı: 38.100 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5 3PMSF, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: 5 pairs of fold-out lashing rings on the outside 3 pairs of fold-out lashing rings on the outside 1 pair of horizontal lashing rings at the front end of the platform Cut-outs in the outer frame of the loading platform for attaching tension straps Approx. 48 mm thick hardwood flooring, checker plate flooring above the axles Landing Gears: JOST landing legs with 2-speed gearbox, lifting capacity 24 t Axles and Tyres: BPW axles, two fixed axles, two steered trailing axles, air suspension, drum brakes, raise/lower function Trailing steering axles with electro-magnetic reverse lock, activated via reverse gear or manually Axle tool Tyres 205/65 R17.5 3PMSF Brake System: WABCO brake system according to EU regulations, with EBS-E Steel Construction: High-strength fine-grained steel construction Steel Grades: S355J2+N/S355MC S690QL/S700MC Electrical Equipment: Electrical system according to EU regulations, lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection panel, with 24N, 24S & 15 pin sockets Connections according to ISO Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component zinc-dust primer Premium 2-component topcoat, single colour in MB 7350 Novagrau No metallic finish possible Rear section metallized and painted RAL 9010 Accessories Included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system according to ECE R 141 Galvanized front connection bar with yellow-red air couplings 4 chocks with holder at the front wall Mounting at rear of gooseneck for ALU loading ramps Galvanized folding supports under the loading platform’s rear chamfer Holder for a warning beacon at the rear of the trailer Height-adjustable tarpaulin superstructure Galvanized front wall with tensioning mechanism for sliding curtains Height-adjustable by approx. 400 mm Roof brand "EDSCHA" sliding forward on ALU roof support profiles, screwed front and rear walls On platform: 3 pairs of adjustable stanchions Rear of superstructure can be hydraulically widened left and right by approx. 750 mm Sliding roof with upward swinging portal beam Sliding tarpaulin with 700 mm length reserve, securing straps at approx. 600 mm intervals Height upper edge of superstructure approx. 3,960 mm Driving with open sliding roof is not permitted and will damage the tarpaulin Suspension rail for ALU loading ramps at the rear of the vehicle At the gooseneck and at the left and right rear panel: each with a bracket for warning boards including socket Mudflap at the rear of the trailer European reflector boards at the rear of the trailer 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Lift axle on the front axle with TEBS E control, depending on current axle load and loading status Rear of superstructure with closed ALU wing doors Anti-slip sand finish painted on checker plates on gooseneck and platform Central lubrication system BEKAMAX, standard grease NLGI-2, removable protective cover for pump 80 km/h speed sticker at rear and on both sides Prodpstphtmsfx Ambsb Load gauge for axle load determination including load chart

Durum: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Prjdpfx Aowmpbdombsb Hata ve ön satış hakkı saklıdır!

Durum: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni,  ,  Müşteri aracı, , --  Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller --, Daha fazla bilgi için: !, Daha fazla detay: ! Prodpfsz E E Thox Ambob

Durum: yeni, boş ağırlık: 15.450 kg, azami yük ağırlığı: 65.550 kg, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 21.900 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimised load platform length, approx. 3,700 mm long, rear section with incline approx. 1,000 mm x 10°. Technical fifth wheel load: 30,000 kg. Compatible with tractor units: 4x2, 6x2, and 6x4. Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear incline approx. 500 mm x 10°. A central support beam features a welded-on support table approx. 300 mm wide, with elongated holes at the front and rear for optional bridging elements that can be hooked in and repositioned. Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective platform length. Axles and Tyres: BPW axles and suspension, first axle steered passively, all other axles with hydro-mechanical forced steering. The first axle is equipped with an electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Manufacturer at our discretion. Sockets and Lighting: 24-volt lighting system in accordance with EU regulations. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. Complete HRM metallisation. Entire steel construction shot-blasted, then hot-dip refined with ZINACOR 850. Paint Finish: 6-step final treatment: Complete steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of bonding primer. Final paint finish with two layers of single-colour 2-pack paint in DB 7350 Novagrey, followed by cavity sealing with special wax. Accessories: Plug-in steel front wall, approx. 400 mm high. Supply line connection bar to tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets. If your pin configuration differs from ISO standards, please notify us. 3 kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches. On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodised finish. 3.5" kingpin. Gooseneck guide plate for the fifth wheel, approx. 500 mm wide. Pjdpfx Ajrigw Rombjrb 2 wheel chocks with mounting bracket in front of the front wall. Mechanical landing legs with 2-speed gearbox and crank. Control valves for hydraulic ramps on the right side of the vehicle. 1 pair of mechanical rear supports. Central lubrication system with 1 pump (BEKAMAX brand) using normal grease (NLGI-2 standard). Removable protection for the central lubrication pump(s). Remote axle steering from the front and rear by cable remote control using push-buttons, with single-track control, without installation in the tractor unit. Under the gooseneck and at the rear end cross-member, left and right, one 7-pin socket with bracket for warning boards. One 7-pin socket at the rear end cross-member. Operating manual and documentation included. One one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm, straight version. Please note that special equipment and accessories will usually increase the unladen weight and accordingly reduce the payload capacity. Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and mounting brackets for beacon.

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.360 kg, azami yük ağırlığı: 29.640 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.100 mm, süspansiyon: hava, renk: gri, Üretim yılı: 2022, Wielton NW-3 model yarı römork, 45 m³ kapasiteli, açılır kapılı boşaltma aracı Üretim yılı: 2022 Teknik özellikler Brüt ağırlık: 36.000 kg Boş ağırlık: 6.360 kg Yük kapasitesi: 29.640 kg İç boyutlar Uzunluk: 870 cm Yükseklik: 210 cm Predpfezzn Trjx Ambsb Genişlik: 250 cm Pnömatik süspansiyon Yüksekliği ayarlanabilir aks Açılır kapı 45 m³ Teknik ve görsel durumu mükemmeldir. Belgeleri eksiksizdir.

Durum: ikinci el, boş ağırlık: 10.480 kg, azami yük ağırlığı: 37.920 kg, toplam ağırlık: 48.400 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 01/2011, bir sonraki muayene (TÜV): 06/2027, yükleme alanı uzunluğu: 10.100 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 205 / 65 R 17,5, renk: gri, vites türü: diğer, ön lastik ölçüsü: 205 / 65 R 17,5, arka lastik boyutu: 205 / 65 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, araç içi bilgisayar, Temel renk: gri Ek özellikler: ABS, yol bilgisayarı, hava süspansiyonu, süspansiyon: hava yükseltmeli, taşıma kapasitesi (kg): 37920 Psdpfx Aszwuzusmbjrb Üstyapı tipi: Meusburger 4 akslı, alçak platformlu römork, Uzunluk x Genişlik 10.100 + 3.495 mm x 2.550 mm, tekerlek yuvası uzunluğu 2.200 mm, 1. ve 4. akslar kaldırılabilir, 3. ve 4. akslar takipçili, tekerlek yuvaları, hidrolik çift rampalar 2.750 + 1.850 x 700 mm.

Durum: yeni, boş ağırlık: 13.500 kg, azami yük ağırlığı: 51.500 kg, toplam ağırlık: 69.500 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r17.5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck in SNT design for optimization of loading area length, length approx. 3,700 mm Gooseneck rear with bevel approx. 1,000 mm x 10° Loading Area: Telescopic loading area, length approx. 8,800 mm, with rear incline approx. 500 mm x 10° Prodpfx Aek Ahugjmbsb Recess in the incline and extending into the loading area for accommodating the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected within the extendable beam and adjust to the respective loading area length Ramps: 1 pair of two-piece steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically adjusted individually approx. 235 mm outwards and 215 mm inwards Axles and Suspension: BPW axles and suspension, two fixed axles, two steering trailing axles Electromagnetic reverse lock activated via reverse gear and manually Air suspension with lifting and lowering valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO brake system, EBS-E according to EU regulations Lighting System: 24-volt lighting system, “ASPÖCK-NORDIK full LED” Metallization: Standard HRM metallization of the external frame Complete steel structure shot blasted, subsequently visible defined surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished Steel Structure: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified according to DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Included accessories: Removable steel front wall, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 Round NATO socket on the front connection strip Cable for supplying the electro-hydraulic pump and/or electric winch (35 mm², 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations (except for hydraulic winches) 1 spare wheel with mounting adapter External beams on the gooseneck with mounting holes for bolt-on lashing rings, first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included Mounting hole on the upper rear of the gooseneck external beam for a screw-on lashing ring 1 pair screw-in lashing rings Approx. 40 mm thick hardwood floor above gooseneck On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized On the gooseneck, one plug-in aluminium rear wall, approx. 400 mm high, anodized 2" king pin Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 4 wheel chocks with holders Provision for aluminium approach ramps Mechanical landing gears with 2-speed gearbox and crank On the loading area, continuous hardwood floor approx. 50 mm thick, interrupted only between the axles Load area locking with conically welded positioning profiles every 250 mm including pre-tension plate Slotted holes at the front of the loading area for attachable and repositionable bridging plates 1 intermediate table with recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering Front and rear with longe...

Durum: ikinci el, boş ağırlık: 11.945 kg, azami yük ağırlığı: 36.055 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 01/2024, süspansiyon: hava, lastik boyutu: 235/75 17,5, lastik durumu: 50 yüzde, renk: turuncu, Üretim yılı: 2024, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Sorgu için araç numarası: 41742 Faymonville, Platform * Üretim yılı: 2024 * ABS, Kilitlenmeyi Önleyici Fren Sistemi * Hava süspansiyonu * Dönebilen aks * Arka yönde dönen aks * Hava bağlantısı, bağlantı başlığı (kırmızı + sarı) * 2x7 kutuplu bağlantı fişi * Kaldırma ve indirme mekanizması Prodpfx Amoz Enqpjbob * Teleskopik - Teleskopik dorse * Hidrolik rampa * Süspansiyon: Hava * Toplam ağırlık: 48.000 kg * Boş ağırlık: 11.945 kg * Yük kapasitesi: 36.055 kg * İzin verilen toplam ağırlık: 48.000 kg * Aks üreticisi: BPW * 1. Aks lastik durumu: %40 -- %40 - Lastik boyutu: 235/75 R17,5 * 2. Aks lastik durumu: %50 -- %50 - Lastik boyutu: 235/75 R17,5 * 3. Aks lastik durumu: %50 -- %50 - Lastik boyutu: 235/75 R17,5 * Lastik boyutları: 235/75 R17,5 * Yükleme alanı 9300mm + 4500mm uzatma * Rampa uzunluğu 4200mm * Hidrolik olarak katlanabilen ve yana hareket ettirilebilen rampalar * Tekerlek yuvası * Genişletilebilir * Aşırı genişlik işaretleri * Konteyner kilitleme sistemi * Alüminyum destek ayakları Sorumluluk reddi: Değişiklikler, ön satış ve hatalar saklıdır. Daha fazla fotoğraf ve videoyu web sitemizde bulabilirsiniz. Kapsamlı hizmetimizden bazı örnekler: * Ticari araçların alımı / satımı / kiralanması * Hızlı ve sorunsuz finansman * Tüm (ihracat) belgelerinin alınması * İhracat ruhsat plakası siparişi * Araç hazırlığı: yeni brandalar, etiketler, boyamalar vb. * Profesyonel yükleme / yük sabitleme * TÜV denetimi, ruhsatlandırma hizmeti * Ticari araçların nakliyesi Eğitimli uzman personelimize danışın, size memnuniyetle yardımcı oluruz. Sorgular için referans numarası: 41742 Faymonville, Platform * Üretim yılı: 2024 * ABS, Kilitlenmeyi Önleyici Fren Sistemi * Hava süspansiyonu * Dönebilen aks * Arka yönde dönen aks * Hava bağlantısı, bağlantı başlığı (kırmızı + sarı) * 2x7 kutuplu bağlantı fişi * Kaldırma ve indirme mekanizması * Teleskopik - Teleskopik dorse * Hidrolik rampa * Süspansiyon: Hava * Toplam ağırlık: 48.000 kg * Boş ağırlık: 11.945 kg * Yük kapasitesi: 36.055 kg * İzin verilen toplam ağırlık: 48.000 kg * Aks üreticisi: BPW * 1. Aks lastik durumu: %40 -- %40 - Lastik boyutu: 235/75 R17,5 * 2. Aks lastik durumu: %50 -- %50 - Lastik boyutu: 235/75 R17,5 * 3. Aks lastik durumu: %50 -- %50 - Lastik boyutu: 235/75 R17,5 * Lastik boyutları: 235/75 R17,5 * Yükleme alanı 9300mm + 4500mm uzatma * Rampa uzunluğu 4200mm * Hidrolik olarak katlanabilen ve yana hareket ettirilebilen rampalar * Tekerlek yuvası * Genişletilebilir * Aşırı genişlik işaretleri * Konteyner kilitleme sistemi * Alüminyum destek ayakları Sorumluluk reddi: Değişiklikler, ön satış ve hatalar saklıdır Daha fazla fotoğraf ve videoyu web sitemizde bulabilirsiniz. Kapsamlı hizmetimizden bazı örnekler: * Ticari araçların alımı / satımı / kiralanması * Hızlı ve sorunsuz finansman * Tüm (ihracat) belgelerinin alınması * İhracat ruhsat plakası siparişi * Araç hazırlığı: yeni brandalar, etiketler, boyamalar vb. * Profesyonel yükleme / yük sabitleme

Durum: ikinci el, azami yük ağırlığı: 27.199 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2013, yükleme alanı uzunluğu: 13.310 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 86 m³, Donanım: ABS, * 5412 - Telefonla yapılacak sorular için araç kimlik numarası * Tip: SKO 24/L - 13.4 FP 60 COOL * ABS, EBS, Schmitz akslar, disk frenler, havalı süspansiyon (kaldırma ve alçaltma), yükseltilebilir aks, alet kutusu, portal kapılar, çift katlı, kirişli * Carrier Maxima 1300, Dizel (Çalışma saati: 4.648 saat), Elektrik (Bekleme saati: 3.326 saat), -30°C / +30°C * 1. Aks lastikleri: 385/65R22,5 (4 / 7 mm) * 2. Aks lastikleri: 385/65R22,5 (3 / 8 mm) * 3. Aks lastikleri: 385/65R22,5 (9 / 3 mm) ----E-posta adresimiz:    Sizin için sunduğumuz hizmetler:      - Kısa süreli veya gümrük plakası temini      - AB genelinde nakliye / teslimat Psdpfx Amjxth R Ijbsrb      - Üçüncü bir ülkeye araçların gümrükleme işlemleri İngilizce, Almanca, Rusça ve diğer diller için WhatsApp:

Durum: ikinci el, kilometre: 470.425 km, güç: 257 kW (349,42 bg), ilk tescil: 01/2006, yakıt türü: dizel, boş ağırlık: 14.220 kg, azami yük ağırlığı: 11.780 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x4, dingil mesafesi: 4.200 mm, frenler: motor freni, renk: beyaz, şoför kabini: gündüz kabini, vites türü: mekanik, emisyon sınıfı: Euro 3, süspansiyon: çelik, koltuk sayısı: 2, toplam uzunluk: 8.200 mm, toplam yükseklik: 3.800 mm, Donanım: ABS, diferansiyel kilidi, düşük ses seviyesi, hidrolik, hız sabitleyici, kabin, klima, merkezi kilitleme, sisal lambaları, tır çekici bağlantısı, vinç, Vehicle location: Bovenden, company premises, 1x air-suspended seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, 16-speed manual transmission, ABS (anti-lock braking system), PTO (power take-off), central lubrication system, differential lock, fog lights, rotating beacon, leaf suspension, towing hitch air+light, crane behind cab, grab control, foldable, 2-point hydraulic outriggers, radio remote control, 3x hydraulic extensions, 2x mechanical extensions. Wheelbase: 4,200 mm Body: 17t roll-off system Hiab-Multilift for containers up to 5.5m & Hiab 166 E-3 Hiduo crane (year 2005), remote control. Engine: D2066LF03, gearbox: 00794123, front axle 1: VO-09-01, rear axle 1: HP-135206, rear axle 2: HPD-138206, cab: M. Crane lifting capacities: 2.6m - 6,300kg; 4.5m - 3,600kg; 6.3m - 2,500kg; 8.3m - 1,880kg; 10.3m - 1,500kg. Pjdpfx Asvhlqfjmberb Hook height approx. 1,470mm! Roll height approx. 1,360mm! Suitable containers available for an additional €3,000! Rotator available for an additional charge! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Durum: yeni, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Loading platform length: 9,000 mm, loading height (laden): approx. 900 mm, 20 lashing rings each rated at 10 t, 16 stake pockets in the outer frame, access ramps (approx. 3,000 x 750 mm), side-adjustable ramps, spring assist for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or tensioning straps, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, incl. axle load indicators. Additional charges for: Warning signs with lighting and beacon = Price: €800, widening to 3 m = Price: €1,100, hydraulic one-piece ramps €500. Also available with 8.10 m loading platform length + widening in stock. Psdjz E E Npjpfx Amberb -- Subject to errors, mistakes, and changes. Sample images. -- More data at: !, More details at: !

Durum: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal alçak yataklı römork, tekerlek yuvalı, TS 3 RM ML 30,0, 2 yükseklikte ve rampalı * Dingil yükü kapasitesi 12 t'den 18 t'ye yükseltildi (dahil). King pin, ikinci king pin pozisyonuna (2") monte edildi; king pin, maksimum 2.750 mm eğime kadar. Arka dönüş yarıçapı yaklaşık 2.400 mm (önerilen boşluk en az 150 mm). Ön dönüş yarıçapı 1.480 mm veya yedek tekerlekle birlikte 1.570 mm. Not: Çekiciye yeterli boşluğun sağlanması müşterinin sorumluluğundadır. * Ön ve arka taraftaki tekerlek yuvalarının alt kısmında (205 mm derinliğinde) açılır parçalar. 6 adet, tekerlek yuvalarının arkasına yerleştirilecek destek tabloları dahil. Destek tabloları tutucuları, 09.112 koduna göre yuva şeklinde. Çelik yerine alüminyum basınçlı hava tankı. * Akıllı kontrol paneli, römork üzerine monte edilmiş, basınç sensörleri içeren bilgi aracı olarak kullanılmakta ve yalnızca toplam dingil yükünü göstermek için tasarlanmıştır. Gösterim, kontrol paneli üzerinden veya kamyondaki EBS hava süspansiyon sistemi üzerinden (kamyon üreticisine bağlı olarak) seçilebilir şekilde yapılabilir. * ?SP Kombi Paketi: Galvanizli çelik sacdan yapılmış, 45° açılı köşelere sahip alet kutusu, RAL 9006 beyaz alüminyum renginde elektrostatik boya ile kaplanmış, dingil platformu üzerine monte edilmiş, üstte menteşeli kapaklı, yan kapıları ve eğimli köşeleri olan, B=2.480 x Y=500 mm boyutlarında. Dingil platformuna katlanabilen alüminyum yan duvarlar (500 mm yüksekliğinde), takılabilir alüminyum arka duvar (150 mm yüksekliğinde), iç ve dış yüzeyleri RAL 9006 beyaz alüminyum renginde boyanmış alüminyum kenar panelleri dahil. Katlanabilir ve çıkarılabilir arka destekler, galvanizli (üst kaplama yok). Vidalı ön yapı dahil. Ön destek kirişinin uzunluğu eğim noktasına kadar 3.935 mm. Ön dönüş yarıçapı, yedek tekerlek olmadan, 2.450 mm veya 2.750 mm eğim ölçüsünde yaklaşık 1.750 mm veya yaklaşık 1.480 mm. * Ön destek kirişinde gömülü olarak monte edilmiş 2 adet konteyner kilitleme mekanizması. * Dingil platformunun altında, seçilebilen alüminyum rampalar veya tekerlek yuvalarını kapatmak için kullanılacak ahşap tabloların saklanması için 3 adet yuva. * Katlanabilir/uzatılabilir destek (galvanizli) ve yükün genişliğini artırmak için ahşap tablolar dahil (arka eğimde değil). Destek tabloları tutucuları dingil platformu üzerinde (yükün genişliği maksimum 2.500 mm olabilir). * Uyarı paketiyle birlikte kullanılan ikinci LED konum lambası, ön ve arka tarafta (çift aydınlatma). * Römorkun arka tarafında, geri vitesle birlikte çalışan 2 adet LED geri marcha lambası (12 V ve 24 V için uygun), maksimum 2 adet ek olarak takılabilir. * Arka tarafta 7 kutuplu priz, geri marcha lambası (58 R) ve şasi bağlantısı için kablolanmış, uzun aşırı boyutlu yükler için aydınlatma. * Sol ve sağ taraftaki rampa üzerinde kauçuk kaplama (yaklaşık 860 mm uzunluğunda), 190 07644 kauçuk şerit, tek parça rampanın iç tablasında. * Tam otomatik merkezi yağlama sistemi, pompa (24V), yağ deposu ve entegre römork kontrol ünitesi ile birlikte (rampaların bağlantısı hariç). (Direksiyonda: dingil platformunun dağıtım ünitesinin bağlantısı dahil). Not: Yalnızca 24V aydınlatma sistemine sahip çekici araçlarda kullanılabilir! Ön satış ve hatalar saklıdır! Podpey R Ipujfx Ambjrb Satış yalnızca genel satış koşullarımıza tabidir. Önemli Not: Teklifimizdeki tüm ayrıntıların dikkatlice incelenmesine rağmen, hataların meydana gelmesi mümkündür. Bu hataların bir kısmı, çeşitli platform sağlayıcılarının sistemlerindeki aktarım hatalarından

Durum: ikinci el, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2019, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.320 mm, yükleme alanı yüksekliği: 1.400 mm, yükleme alanı hacmi: 24 m³, Schmitz Cargobull Gotha ALÜMİNYUM 3 Dingilli Damper Dorsesi 2 adet stokta (1 adet 04.2019 + 1 adet 01.2019) Tip: SKI 24 SL 7.2 Aks: SAF Fren: Kampana Yaklaşık 24 m³ Uzunluk: 7,20 m Genişlik: 2,32 m Yükseklik: 1,40 m Predpfsy Hyqcox Ambsb Finansman/leasing konusunda partnerlerimizle birlikte size memnuniyetle destek oluruz. Tüm bilgiler garanti verilmeden sunulmuştur. Hatalar ve ara satış hakkı saklıdır.

Durum: ikinci el, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Prodpfxsi Ai E Rj Ambjb Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durum: yeni, azami yük ağırlığı: 36.040 kg, toplam ağırlık: 53.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Equipment excerpt. Full specification upon request. Gooseneck: * Gooseneck in SNT design to optimize the loading area length, approx. 3,750 mm long * Gooseneck hydraulically lift/lowerable and detachable * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable in SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed length * 7 pairs of lashing rings foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner girder for mounting screw-on RUD rings Rear Undercarriage: * Rear chassis with closed outer frame and checker plate cover * Chassis with excavator trough, closed in the rear half to accommodate air tanks * 3 pairs of lashing rings foldable outward (LC 5,000 daN) * 1 pair of lashing rings foldable outward (LC 10,000 daN) * 1 pair of flat lashing rings, front and rear of the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles hydromechanically forced steered Pedpfx Ajy Uwu Ismbsrb * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of choice. Load index (146/146F) Brake System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red as per RAL system 841GL Including accessories: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection bar at the front * Remote steering from front and rear via cable remote control with push buttons, including single-track axle control (without installation in the tractor unit) * Prepared for bolt-on container positioning for 1 x 20', 1 x 40', or 1 x 45' container on the outer beams. No container locks * Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Spiral cable for supplying the electro-hydraulic power unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between semi-trailer and tractor unit with plug connection (NATO-NATO) * Yellow reflective tape to EU regulations on sides, extension and rear of the trailer * At the gooseneck and rear, left and right, a bracket for warning signs including a socket * Manual and description on USB stick * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable guard around the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer beam for mounting screw-on RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above normal ride height, adjustable by hand control * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * On the gooseneck, a separate air connection with air gun * 1 stainless steel toolbox, approx. 1,350 x 400 x 400 mm, mounted externally

Durum: yeni, azami yük ağırlığı: 28.660 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.600 mm, yükleme alanı genişliği: 2.300 mm, yükleme alanı yüksekliği: 1.500 mm, yükleme alanı hacmi: 25 m³, Üretim yılı: 2026, Donanım: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 3 x 9 t BPW axles * 1st lifting axle with traction aid ----Suspension: * Air suspension with automatic lowering during tipping operation (to increase stability; deactivatable for overhead paver operation) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective cover * 1 x additional LED work light * Flashing side marker lights ----General Equipment: Pedpor Exzmofx Amberb * Aluminum air tanks * Jost telescopic steel landing legs with base plate (detachable only when unloaded) * 4 m aluminum access ladder stowed laterally on the right above the mudguards * Closed individual plastic mudguards * Folding underrun protection * Rear towing eye * Folding access ladder at the front left side * Document box on the front wall ----Chassis: * Chassis made of high-strength fine-grained steel with Meiller-specific torsion crossmembers ----Tipping Body: * Half-shell rear tipping steel body (front hydraulic cylinder with medium working pressure) * Front wall with 600 mm roof extension as tarpaulin support * Side walls with strong all-round inward inclined top rails * Front & rear wall slanted * Overlapping tailgate with rubber seal and 2 additional toggle locks as well as automatic two-hook locking ----Thickness of floor, sides, front and rear wall: * Front wall: 4 mm made of BS 70 steel * Tailgate: 4 mm made of HBW 400 steel * Side walls: 4 mm made of HBW 450 steel * Tailored floor made of 5/6 mm Hardox 450 steel ----Tarpaulin: * Electric sliding tarpaulin (RAL 9006 white aluminum) with switch on chassis and radio remote control ----Load Volume: * Approximately 25 m³ ----Fifth Wheel Height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ----General Information: * --Technically permissible gross weight of 39,000 kg-- * Subject to prior sale and errors * New vehicle with manufacturer's warranty ----Delivery Time: * Immediately available from Egestorf on the A7