Kullanılmış Meusburger 3-Achs-Tele-Semi Mit 1 Paar Radmulden satın al (62.679)

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: Kjdpfxoxnnk De Akqsdp - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durum: ikinci el, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: Ksdpfx Akoywv Ixsqodp - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps.

Durum: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: Kodowu A Sljpfx Akqodp - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Durum: ikinci el, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2024, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, Üretim yılı: 2024, Donanım: ABS, For every used semitrailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: Kdedpfsypb Akox Akqop - Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading area: - Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° - A recess in the loading platform, including into the chamfer, for accommodating the excavator bucket arm - Pneumatic locking system with conical locking pins and reinforced locking positions - Hardwood flooring on the loading platform chamfer Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps laminated with hardwood - Hydraulically foldable ramp tips - Ramps can be hydraulically moved individually approx. 235 mm outward and approx. 215 mm inward - Square serrated crossbars 20 x 30 mm, every approx. 200 mm on the outer frame of the ramp Axles and suspension: - BPW axles and suspension, first axle self-steering, all other axles hydromechanically forced steering - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre sensors Accessories included: - Removable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for hydraulic operations - 1 spare wheel - External beams of the gooseneck with mounting holes for bolt-on lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU sidewalls, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear wall, approx. 400 mm high, anodized - 2" king pin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, foldable lashing rings in the outer frame of the loading area - Expandable (galvanized) extensions up to approx. 230 mm per side - Wheel recesses with square serrated strips, 15 x 15 mm, continuously open ahead of the axles up to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel recesses - ALU elements lockable on the extension tubes of the width extensions - Expandable U-profiles for ALU covers - Wheel recesses with square serrated strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU elements lockable on the extension tubes of the width extensions - 1 pair of mechanical rear supports - Rear steering operable from front and rear via cable remote control, with axle tracking control - 1st axle with automatic lift axle function and starting aid in accordance with EU Directive 2021/535 - Under the gooseneck and at the rear crossbar left and right, each with a 7-pin socket with holder for warning boards - Square serrated strips 20 x 30 mm, every approx. 200 mm on the outer frame of the loading platform chamfer - Central lubrication system with 1 pump, brand BEKAMAX - Radio remote control for rear steering, in addition to cable remote - Wabco Smart Board system - 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm

Durum: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long - Rear gooseneck with bevel, approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood flooring on the bevel of the loading platform Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide - Ramps with hardwood covering - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Kjdsk Aht Ujpfx Akqjdp - Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually - Air suspension with lift and lower valve - Tires: 235/75 R 17.5 twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS tire sensors installed in all wheels, including spare wheels Accessories included: - Detachable front wall, steel, approx. 400 mm high - 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch - Parking bracket for warning signs on gooseneck when not in use - 1 spare wheel - On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized - On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized - Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin - 2'' king pin - Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with two-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Telescopic width extensions (galvanized) approx. 230 mm per side - Wheel recesses with square climbing strips - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering from front and rear via cable remote control, with single track axle monitoring - 1st axle with automatic lifting axle function - Central lubrication system with 1 pump, BEKAMAX brand - Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon

Durum: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring Floor: - 35 mm larch wood floor with aluminum omega profiles Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Kdodexnym Djpfx Akqep Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Durum: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame Kdodpfx Akjxgm S Djqep - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, Her kullanılmış treyler için güncel ve eksiksiz bir denetim ve fonksiyon raporu alırsınız. Şasi: - Sağlam çelik şasi kaynak konstrüksiyonu, ön çerçeve kıvrımı ve arka kısmında yaklaşık 500x100 mm eğimli düz yükleme alanı - 200 mm çerçeve boynu, köşeleri eğimli - Kaz boynunun sonu eğimli, yaklaşık 500 x 100 mm (arka eğim alanında dış çerçeve üzerinde tırmanma dişleri) - Değiştirilebilir 2'' king pimli çift king pim pozisyonu - Dış çerçeve dışa kapalı, sabitleme kayışları ile yük bağlamaya uygun delikli dış çerçeve (zincir ile kullanılamaz) - Güçlendirilmiş şasi yapısı / ağırlık merkezinde noktasal yük taşıma - Yükleme alanında uzatılabilir genişletmeler için hazırlık - Ekskavatör çukuru (kapaksız), derinlik yaklaşık 220 mm, genişlik yaklaşık 600 mm, yaklaşık 2. aks sonrasında araç sonuna kadar - Aks önünde çelik kapaklı 1 çift teker çukuru - (Kapaklarda Körapur kaplama), derinlik yaklaşık 400 mm, ayrıca 1. ve 2. aks arasında çelik kapaklı 1 çift teker çukuru - Alt koruma = uzatılmış arka sac - Arka düşme ayakları Rampalar: - Özel üretim, mekanik uzatmalı 2 parçalı yükleme rampaları - Yaklaşık 2.850 mm + 1.850 mm uzunluk, hidrolik rampalı kaldırma sistemi (sadece elektro hidrolik ünite ile birlikte) - Genişlik yaklaşık 800 mm - Ahşap kaplama - Rampalarda tırmanma dişleri dahil - Sürüş pozisyonunda sabitleme kayışları ile kitlenebilir - Kumanda koluyla arka sağda kullanım - Yanlara hidrolik olarak kaydırılabilir Zemin: - 35 mm lâriç ahşap zemin, alüminyum omega profillerle Destek Ayakları: - Mekanik 24 ton destek ayakları, tek taraflı çalıştırma ve itme dengesiyle Akslar, Direksiyon ve Lastikler: - BPW havalı süspansiyon aksları, her biri 10 ton aks yükü, körük çapı 360 mm - S-kam fren 300/200 mm, asbestsiz fren balataları - Otomatik çubuk ayarlayıcı - Kaldırma ve indirme mekanizması, toplam kaldırma yüksekliği yaklaşık 200 mm - 2. sürüş pozisyonu, küresel vana ile +50 mm - 1. aks kaldırılabilir aks (EBS kablolu), otomatik onaylama, treylerde düğme ile mekanik acil onaylama - 3. aks kaymalı yönlendirmeli takip aksı, elektrikli ve mekanik kilitleme - 12 çelik jant, 10 delikli, merkezden presli - 12 lastik 245/70 R 17,5 143/141J, tubsuz - Lastik basınç kontrol sistemi dahil Kdedpfxozdzrte Akqsp Aksesuarlar: - Kaz boynunda takılabilir yan ve arka paneller, yaklaşık 400 mm yüksekliğinde - Stepne tutucu - Yan alüminyum çarpma koruması - 4 adet takoz ve aparatı - Uzun plaka tutucu arka sacda - 1 adet arkada takılabilir ECE levhası - Yandan 11 çift ZK modül 10t: - 2x kaz boynunda - 9x yükleme alanında - Uyarı levhaları uzatılabilir, her biri 3 konum lambası, ön yükleme ayaklarında ve arka arka sac önünde, yükleme genişliği 4.500 mm'ye kadar kademesiz uzatılabilir - Yükleme alanında takılabilir uyarı levhaları için 4 yuva - Yanlarda 100x50 mm takmatik dikme için 6 çift yuva - Kaz boynunda dış çerçeveden ana şasiye kadar 2 adet 100x50 mm dikme sırası (1x king pin öncesi, 1x sonrası) - Yükleme alanında dış çerçeveden ana şasiye kadar 3 adet 100x50 mm dikme sırası (1x ön, 1x 1. aks öncesi, 1x 3. aks sonrası) - Yük platformunda konteyner kilidi için 2 çift çelik plaka, 1x 20ft konteyner alacak şekilde - Alt korumada monte edilmiş kauçuk etek

Durum: ikinci el, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Robust steel frame welded construction with front frame cranking and a flat loading area featuring a rear taper approximately 500x100 mm - Frame neck 200 mm with beveled corners - Sloped end at gooseneck approx. 500 x 100 mm (anti-slip ribs on the outer frame at the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as perforated outer frame for securing with lashing straps (chains not possible) - Reinforced frame design / point load at the center of gravity - Preparation for extendable load area widenings - With excavator trough (uncovered), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle up to the end of the vehicle - 1 pair of wheel recesses in front of the axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair of wheel recesses between the 1st and 2nd axles with steel covers - Underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Special two-part loading ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Including anti-slip ribs on the ramps - Secured in transport position with lashing straps - Operation via control lever mounted at the rear on the right in driving direction - Hydraulically adjustable sideways Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing legs with single-sided operation and stroke compensation Axles, Steering, and Tires: - BPW air suspension axles, each with a 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle lift axle (wired through EBS), automatic confirmation with mechanical emergency activation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, mid-centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Kdodpfszabnbjx Akqop Accessories: - Removable side and rear boards on the gooseneck approx. 400 mm high - Spare wheel carrier - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs of ZK-modules 10t on the sides: - 2x on the gooseneck - 9x on the loading area - Extendable warning boards, each with 3 position lamps, at the front on landing gear and at the rear before the end plate, steplessly extendable up to a loading width of 4,500 mm - 4 mountings for warning boards that can be inserted into stake pockets on the loading area - 6 pairs of side stake pockets for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inward up to main frame (1x before and 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward up to main frame (1x in the front area, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks for accommodation of 1x 20ft container - Rubber apron mounted on underrun p

Durum: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting Kdjdowviwkspfx Akqep - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durum: yeni, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: gri, Donanım: ABS, Kaz boynu, sabit, orta boru tipinde: - Ön köşeler 90° - Spanzıırtlar için kesiklere sahip kapalı dış çerçeve - Alüminyum rampa bağlantı rayları için delikli şerit - 2" kral pimi - Sağ tarafta mekanik çalıştırılan BPW yer desteği - Kaz boynu sonunda 550 mm uzunluğunda, 8° eğim - Kaz boynu yükleme yüzeyinde 3 çift gömme yük bağlama halkası - Kaz boynu yükleme yüzeyinde 2 çift 100 x 50 mm yük cepi Yükleme alanı: - Spanzıırtlar için kesiklere sahip kapalı dış çerçeve - Ön kısım sabit parça 360 mm - Kaymaz kaplamalı sac zemin - Yük güvenliği için uzun delikli ekskavatör çukuru - Birinci aks önünde sabit entegre 1 çift tekerlek yuvası (390 mm derinlik, eğimde tırmanma çıtaları dahil) - Birinci ve ikinci aks arasında sabit entegre 1 çift tekerlek yuvası (390 mm derinlik, eğimde tırmanma çıtaları dahil) - Teknik olarak maksimum uzama 3.740 mm - 600 mm tam genişlikte, 3.000 mm'ye kadar genişletilebilir, 8 ton tekerlek yüküne dayanıklı 'Premium' alüminyum tekerlek yuvası kaplaması - Tekerlek yuvası kaplaması ile farklı derinlikler (yaklaşık 390 mm ve 260 mm) - Araç arka kısmı 8° eğimli, uzunluk 550 mm - Rampaların kolay monte ve demontajı için kayar yapı - Yükleme sırasında destek için mekanik, yay destekli konforlu arka destekler - Arka bölümde tam kaplı çamurluk - Yükleme alanının başında ortada 1 çift 10.000 daN LC bağlama noktası - Yükleme alanının arka kısmında ortada 1 çift 10.000 daN LC bağlama noktası - Yükleme alanı dış çerçevesinde 7 çift 10.000 daN LC bağlama noktası 3 dingilli şasi: - BPW ECO Max marka, havalı süspansiyonlu akslar - 245/70 R17.5 çift lastik, 12 ton aks yükü - Jantlara entegre lastik basınç sensörü ile lastik basınç kontrol sistemi (RDKS) - 2x hidroforik zorunlu yönlendirmeli aks ve 1x sabit aks - Knorr marka fren sistemi (AB yönetmeliklerine uygun EBS-E ile) - Knorr TIM G2 (Treyler Bilgi Modülü) - RSS (Roll Stabilite Desteği) sürüş denge kontrolü - Standart olarak ikinci yükseklik: 895 mm (-100/+100) - Radyo kumanda veya kaz boynunda düğme ile arka tekerlek yönlendirme kontrolü; tek iz fonksiyonu dahil - İlk aksda yük bağımlı yükseltilebilir aks ve kalkış yardımı (TIM üzerinden yükseltilebilir aksın zorunlu indirimi mümkün) İki parçalı rampalar: - UxG: 4.300 x 800 mm - Taşıma kapasitesi: 38t; zemin kaplaması: ladin ağacı - Taşıma pozisyonunda rampayı sabitlemek için entegre mekanik kilitli kaldırma silindiri - Rampa işlemleri: kaldırma ve kaydırma hidrolik - Arka işlevlerin kontrolü için de kullanılabilen uzaktan kumanda - Rampa kontrolü için elektro-hidrolik ünite Dahil olan aksesuarlar: - Yaklaşık 400 mm yüksekliğinde ön duvar (arka duvar için park konumlu) Ksdpfxezdz Iuj Akqjdp - Kaz boynu önünde dik yedek lastik tutucu ve yedek lastik - Takoz ve tutucu - 3.000 mm'ye kadar genişletecek barlar - 400 mm yüksekliğinde alüminyum tak-çıkar yan paneller (2x yan panel 3.150 mm, arka panel runganlı / galvanizli) - 2 çift 423 x 423 mm uyarı levhası, 2 pozisyon lambası ve döner ikaz lambası soketli - Ekskavatör çukuru sonunda tak-çıkar bölme sacı - Dış yükleme alanında ve arka eğim dahil 8 mm kalınlığında, kumlu Traffideckgo kauçuk zemin kaplaması (ön sabit yükleme alanı hariç) - Arka eğime yan tırmanma çıtaları - Arka kısımda kırmızı şerit işaretleme - Yanlarda beyaz şerit işaretleme - Merkezi yağlama sistemi (yönlendirme ve şasi)

Durum: yeni, boş ağırlık: 11.800 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: gri, Donanım: ABS, Sabit, orta boru tasarımlı kuğu boynu: - Ön köşeler 90° - Germe kayışı için kesiklerle kapalı dış çerçeve - Alüminyum yükleme rampaları için delikli şerit - 2" - Kral pimi - Sürüş yönünde sağda mekanik olarak çalışan BPW destek ayakları - Kuğu boynu sonunda 550 mm uzunluğunda, 8° eğim - Kuğu boynu platformunda gömülü 3 çift yük sabitleme halkası - Kuğu boynu platformunda 100 x 50 mm boyutunda 2 çift kazık yuvası Yükleme alanı: - Germe kayışı için kesikli, kapalı dış çerçeve - Ön sabit bölüm 360 mm - Kaymaz kaplamalı sac zemin - Yük emniyeti için uzun delikli ekskavatör çukuru - 1. dingil önünde sabit monte edilmiş, 390 mm derinliğinde, eğimde tırmanma çıtalı 1 çift tekerlek çukuru - 1. ve 2. dingil arasında sabit monte edilmiş, 390 mm derinliğinde, eğimde tırmanma çıtalı 1 çift tekerlek çukuru - 3.740 mm teknik maksimum uzatma - "Premium" alüminyum tekerlek çukuru kapakları, 600 mm tam genişlikte, 3.000 mm'ye kadar genişletilebilir, 8 t teker yükü - Kapak kullanımıyla farklı teker çukuru derinlikleri (yaklaşık 390 mm ve 260 mm) - 8° eğimli ve 550 mm uzunluğunda arka uç - Rampaların kolay montajı/sökümü için kızaklı yapı - Yükleme sırasında destek için mekanik, yay destekli konforlu destek ayakları - Arka kısımda tam boy çamur koruyucu - Yükleme alanı başlangıcında ortada 1 çift 10.000 daN yükleme noktası - Yükleme alanı arka bölümünde ortada 1 çift 10.000 daN yükleme noktası - Yükleme alanı dış çerçevesinde 7 çift 10.000 daN yükleme noktası 3 akslı şasi: - BPW ECO Max marka, havalı süspansiyonlu aks - 245/70 R17.5 çift lastikli, 12 t aks kapasitesi - Jant üzeri lastik basınç sensörlü Lastik Basıncı İzleme Sistemi (RDKS) - 2x hidrolik zorunlu yönlendirmeli aks ve 1x sabit aks - Knorr marka (AB yönetmeliklerine uygun, EBS-E) fren sistemi - Knorr TIM G2 (Treyler Bilgi Modülü) - RSS (Devrilme Stabilite Desteği) - Standart ikinci yükseklik 895 mm (-100/+100) - Yönlendirme kontrolü; kablosuz uzaktan kumanda veya kuğu boynundaki düğme ile, tek izleme fonksiyonu dahil - 1. aks üzerinde yük bağımlı kaldırma aksı ve ilk kalkış yardımı (Zorunlu aks indirme fonksiyonu TIM üzerinden mümkün) 2 parçalı rampalar: - LxG 4.300 x 800 mm - 38t taşıma kapasitesi; zeminde ladin ağacı kaplama - Taşıma pozisyonunda güvenlik için rampanın kaldırma silindirinde entegre mekanik kilitleme - Rampa işlemleri: kaldırma ve yana kaydırma hidrolik - Uzaktan kumanda hem yönlendirme hem de arka fonksiyonları kontrol edebilir - Rampa kullanımı için elektro-hidrolik ünite Dahil olan aksesuarlar: - Arka duvar için park yeri dahil, yaklaşık 400 mm yüksekliğinde ön duvar - Kuğu boynu önünde dik yedek lastik tutucu, yedek lastik dahil - Takozlar ve tutucuları - 3.000 mm’ye kadar genişletme için traversler - 400 mm yüksekliğinde alüminyum takma yan paneller, 2x yan panel (yaklaşık 3.150 mm uzunluğunda) ve rünlü, galvanizli arka panel Kdedozdzunopfx Akqjp - 2 çift 423 mm x 423 mm uyarı levhası, 2 konum lambası ve uyarı lambası için soket yeriyle - Ekskavatör çukuru sonunda takılabilir bir bent sacı - Traffideckgo kauçuk kaplama, yükleme alanı dış bölümünde 8 mm yükseklikte, arka eğim dahil, ön sabit bölüm hariç, kumlamalı - Arka eğimde yan tırmanma çıtaları - Arkada kırmızı kontur işareti - Yanda beyaz kontur işareti - Merkezi yağlama sistemi (yönlendirme ve şasi)

Durum: ikinci el, azami yük ağırlığı: 36.540 kg, toplam ağırlık: 48.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2020, bir sonraki muayene (TÜV): 07/2028, Üretim yılı: 2020, Donanım: ABS, Dahili Araç No: G400133 Araç hemen Kaufungen’daki sahamızda mevcuttur Daha fazla bilgi için: * Golec Nutzfahrzeuge GmbH (Almanca, İngilizce, Bulgarca, Rusça) * Viktoria Sologubova (Lehçe, Rusça, Ukraynaca, İngilizce) LANGENDORF SATÜ 30 Uzun Düşük Yükleyici – 10,0 m Tekerlek yuvalı Model yılı: 2020 Kablosuz uzaktan kumanda 3 dingil – 2’si yönlendirmeli, 1’i kaldırılabilir Uzunluk: 13.900 mm Yükleme alanı: 10.000 mm Maksimum teknik toplam ağırlık: 48.500 kg Boş ağırlık: 11.960 kg Finansman örneği: * Dahili Numara: G400133 * Satış fiyatı: 59.900,00 € Kdjdpfxjy A Uxae Akqsp * Peşinat: %10 * Vade: 60 ay * Aylık taksit: 925,02 € * Kalan değer: 11.380,00 € Eğer teklifimizi beğendiyseniz ya da teklifimizi ihtiyaçlarınıza göre uyarlamak isterseniz, lütfen Bay Enchev ile iletişime geçiniz. Aramanızı bekliyoruz. Hatalar olabilir. Kullanılmış aracınızı memnuniyetle takas alıyoruz. Finansman doğrudan firmamızda mümkündür. GOLEC NUTZFAHRZEUGE GMBH Konuştuğumuz diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Durum: ikinci el, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2010, Donanım: ABS, Dorse - Araç Kimlik No.: W09PG3009A0M49815 - İlk tescil: 25.08.2010 DOLLY - Araç Kimlik No.: W09PG3009A0M49816 - İlk tescil: 25.08.2010 ELEKTRİKLİ HİDROLİK SİSTEM Almanya'da muayene zamanı gelmiş Boş ağırlık: Dorse: 16.850 kg -- DOLLY: 2.240 kg Kdedpswxi Nrefx Akqep Çeki yüksekliği: 1.280 mm - Değiştirilebilir king pimi - 3,5 " Ön dönme mesafesi yaklaşık 1.640 mm ----hidrolik olarak alçaltılıp yükseklik ayarlanabilen kuğu boynu - Uzunluk 3.750 mm Alçak yatak: Uzunluk 6.850 mm Genişlik 2.750 mm - Yükleme yüksekliği: yaklaşık 350 mm TELESKOPİK olarak 4.000 mm uzatılabilir Genişletilebilir: 3.210 mm’ye kadar Şasi: Uzunluk: 4.100 mm Genişlik: 2.750 mm - Yükleme yüksekliği: yaklaşık 1.035 mm Toplam uzunluk: 14.700 mm Ekskavatör çukuru - Arm çukuru Merkezi yağlama sistemi GIGANT akslar - SALINCAK AKSLAR, davlumbaz frenli Uzaktan kumanda ile çalışır 3 x hidrolik süspansiyonlu ve zorunlu yönlendirmeli aks Aks yükleri 3 x 12.000 kg treylere uygulanan king pin yükü maksimum 25.000 kg Lastikler: 245/70 R 17,5 Uygun DOLLY 1 aks BPW Eco aks, davlumbaz frenli Havalı süspansiyonlu Değişiklik, ara satış ve hata yapma hakkı saklıdır. Tanımlama aracı genel tanıtımı için yapılmıştır ve satış hukuku anlamında bir garanti teşkil etmez. Satış sözleşmesindeki açıklama esas alınır. Teklifimiz genel olarak yeni TÜV muayenesi (Alman muayene) olmadan geçerlidir. Yeni TÜV muayenesi isterseniz, ortak servislerimizden teklif sunmaktan memnuniyet duyarız! Araç reklam kaplamalı ve/veya yazılı olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir.

Durum: ikinci el, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2011, Donanım: ABS, Vehicle Identification Number: W09TS300990M49248 Telescopic extension: 4,300 mm Sliding bed Wheel recesses Unladen weight: 9,000 kg Kodeyx N Eyepfx Akqsdp German MOT (HU) due Gooseneck: 3,650 mm - Fifth wheel height: 1,250 mm Low bed: Length: 9,430 mm (of which 1,830 mm tapered) -- Width: 2,540 mm -- Loading height: 890 mm Removable rails Support legs Width extension lighting Front fifth wheel load: max. 19,000 kg Axle loads (technical): 3 x 10,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable 2 x toolboxes Tyres: 235/75 R 17.5 Spare wheel carrier WITH spare wheel Modifications, prior sale, and errors expressly reserved. The description is for general identification purposes only and does not constitute a warranty in the legal sense of the term. The purchase contract description is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we are glad to provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Durum: ikinci el, azami yük ağırlığı: 34.440 kg, toplam ağırlık: 46.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/1999, yükleme alanı uzunluğu: 13.550 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 46.500 kg Boş ağırlık: 12.060 kg Yük kapasitesi: 34.440 kg Toplam uzunluk: 13.550 mm - 26.550 mm Genişlik: 2.550 mm Kdodpfx Aoycpbnokqep Diğer bilgiler: - 3 akslı, hidrolik olarak zorlanmış direksiyonlu - Aşırı yükleme için yönlendirme takozu - Rampa bağlantı çubuğu - Yükleme alanında takılabilir kenar çıtaları - 2 kademeli teleskopik, 26.550 mm'ye kadar uzatılabilir - Kuğu boynu üzerinde alet kutusu - Elektrikli tekerlek - Genişletme panelleri için ön hazırlık - Hidrolik takip fonksiyonu, elektrikli uzaktan kumanda - Geniş sabitleme seti - Kendi hidrolik pompa ünitesi Diğer yeni ve kullanılmış dorse tipi düşük platformlu römorklar mevcuttur. Daha fazla bilgi için:

Durum: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset Kdedpfowu Agiex Akqjp - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durum: ikinci el, boş ağırlık: 11.130 kg, azami yük ağırlığı: 36.870 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, süspansiyon: hava, lastik boyutu: 235/75 R 17,5 140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5 140J, arka lastik boyutu: 235/75 R 17,5 140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni,

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: Kjdpfeq Euakjx Akqsdp * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: Ksdpeykx Nkjfx Akqodp * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: Kdodpfx Aoykx Nqskqep * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durum: yeni, azami yük ağırlığı: 26.500 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.450 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, WIESE 3-axle low-loader with ramps and wheel recesses – NEW Availability approx. 4 months from order ---Vehicle Data--- Manufacturer: WIESE Type: WSA 3-36 TL Year of manufacture: 2025 Axles: 3 Gross vehicle weight: 39,000 kg Fifth wheel load: 12,000 kg Axle group max load: 27,000 kg Kdodpfoyuq Igsx Akqop Unladen weight: approx. 9,500 kg Tyres: 235/70 R17.5 Brakes: WABCO EBS with RSS ---Dimensions--- Loading platform length: 13,450 mm Low-bed length: approx. 9,550 mm Gooseneck length: approx. 3,640 mm Overall width: 2,550 mm Loading height low-bed: approx. 920 mm Fifth wheel height: approx. 1,250 mm ---Equipment--- 3 x SAF axles (9 t) with air suspension 1st axle: Lift axle 3rd axle: Follower axle with steering (lockable) Electronic air suspension E-TASC WABCO EBS braking system with Roll Stability Support Tire pressure monitoring system for 12 tyres Complete LED lighting 4 x LED work lights 15-pin socket + 2x 7-pin sockets ---Body--- Robust steel frame 28 mm hardwood floor / omega floor 13 pairs of lashing rings (8,000 kg) Additional lashing points (5,000 daN) 2 pairs of wheel recesses Excavator arm recess Aluminium plug-in side boards on the raised platform Front-mounted toolbox ---Ramps--- 2 x aluminium drive-on ramps Dimensions: approx. 2,800 x 600 mm Load capacity: 27,460 kg Spring lift assistance Sideways adjustable ---Other Features--- Warning plates for overwidth up to 3 m Contour marking as per ECE-R48 Technical documentation and TÜV report For further information, please do not hesitate to contact us.

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: Kodpfotpta Dox Akqsdp * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck: Gooseneck with rear bevel approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Load area: Extendable load area with rear bevel approx. 500 mm x 8° 8 pairs of outward folding lashing rings 1 pair of flat-fitted lashing rings at the front of the load area Recesses in the outer frame of the loading area for attaching tie-down straps Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Two-piece steel ramps: One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg. Landing legs: • JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tires: BPW axles and suspension, 4th and 5th axles steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually Tires 235/75 R 17.5 3PMSF Braking system: Braking system according to EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin Connection compliant with ISO: 24N ISO-1185 Kedol Sl Izopfx Akqsdp 24S ISO-3731 15 pin ISO-12098 Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau Rear part metalized and painted in RAL 9010 (pure white) No metallic paint possible Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Accessories: One spare wheel with holder in front of bulkhead 2" kingpin One galvanized steel front wall, approx. 400 mm high Yellow-red air couplings mounted on the galvanized connector rail at the front 2 wheel chocks with holder on the front wall Bracket at rear of gooseneck for ALU drive-on ramps One holder for a rotating beacon at the rear of the trailer Galvanized supports beneath the rear bevel of the loading area White reflector tape according to EU regulations on the sides, extension, and rear in red Electro-hydraulic unit at rear under the loading area Mounts for warning signs with socket at the gooseneck and rear plate left and right Ramp control valves fitted to right-hand side of the trailer One mud flap at the rear of the trailer Manual and documentation on USB stick 3.5" kingpin supplied loose Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH) Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container 6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area Galvanized extensions, extendable by approx. 230 mm per side Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel On the checker plates, above the kingpin and the loa...

Durum: yeni, boş ağırlık: 10.700 kg, azami yük ağırlığı: 38.800 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 r 17,5, renk: gri-siyah, Donanım: ABS, Gooseneck: • Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood floor Extendable loading platform: • Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° • Cut-outs in the outer frame of the loading platform for securing straps • Approx. 48 mm thick hardwood covering, checker plate covering over the axles Two-part steel ramps: • One pair of galvanized, two-part steel ramps with approx. 48 mm thick hardwood covering • Ramp sections fold in and out hydraulically, with hydraulic lifting system and hydraulic lateral adjustment • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reversing lock, activation via reverse gear and manual operation • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Painting: • First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component zinc-rich primer • High-quality 2-component top coat, single color in MB 7350 Novagrey • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lift capacity (50t test load) Steel construction: • Steel construction made of high-strength fine grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system according to EU requirements, 24 Volt lighting • ASPÖCK UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets Included accessories: • One spare wheel with holder • One galvanized steel headboard approx. 400 mm high • Yellow-red air couplings on the galvanized connection panel at the front • 4 wheel chocks • Bracket for rotating beacon at the rear of the trailer • Holder at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the rear chamfer of the loading platform • Cover plates for bridging the gap between ramps and loading platform • White reflector tape to EU specifications on the sides, extension, and red at rear • Electro-hydraulic unit mounted at the rear, under the loading platform • On both sides of the gooseneck and ramps, holders for warning panels with socket • Control valves for the ramps mounted on the right trailer side • ALU sideboards and tailboard on the gooseneck approx. 2,440 x 400 mm • Rear, galvanized removable stakes (body length approx. 2,560 mm) • Four approx. 400 mm extendable warning boards with position light • 3 pairs of WADER container locks in deck for 20ft, 30ft, or 40ft container • 6 pairs of stake pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the rear chamfer of the loading platform • Anti-slip sand coating on checker plate surfaces above kingpin and loading platform • Load pressure gauge for axle load measurement including load chart Kdjdpfehlz S Njx Akqep • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) and hot finished.