Alçak şasi dorse

MAX Trailer 4-Achs-Tele-Semi-zwangsgelenkt

Gooseneck:
- Gooseneck with rear tapering approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring

Extendable loading platform:
- Extendable loading platform with rear tapering approx. 1,000 mm x 8°
- 5 pairs of foldable lashing rings (LC 5,000 daN)
- 3 pairs of foldable lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- Cut-outs in the outer frame of the platform for anchoring straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, over the axles checker plate

Landing gears:
- JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)

Brake system:
- WABCO braking system according to EU regulations with EBS-E (4S3M)

Steel construction:
- Steel structure made from high-strength fine-grained steel

Axles and tires:
- BPW axles and suspension, first axle rigid, all other axles hydro-mechanically steered
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- Axle toolbox
- TPMS tire pressure monitoring system according to ECE R 141
- Tires 245/70 R 17.5 3PMSF

Included accessories:
- 2" kingpin
- One galvanized steel front wall approx. 400 mm high
- At the front galvanized connection strip, yellow-red air couplings
- 4 wheel chocks with holders on the front wall
- One spare wheel with holder in front of the front wall
- Electro-hydraulic unit
- Rear steering, controllable from front and rear via cable remote control (push button), with axle alignment monitoring
- European reflective plates (red-yellow) at the rear of the trailer
- White reflective tape according to EU regulations on the sides and extension, red at the rear
- Bracket for warning signs on left and right of the gooseneck and at the rear, with socket included
- Galvanized, extendable side extensions approx. 230 mm per side
- Bracket for a revolving beacon at the rear of the trailer
- Galvanized drop down supports under the angled part of the loading platform
- One mudflap at the rear of the trailer
- Manual and description on USB stick
- BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable guard around the pump
- ALU plug-in sideboards and rear board on the gooseneck approx. 2,440 x 400 mm
- Rear, galvanized plug-in stanchions removable (superstructure length approx. 2,560 mm)
- One INOX toolbox 1,350x400x400 on the gooseneck
- Note: The box covers the oil filler cap
- 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container
- 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of loading platform
- Sliding plug-in rail for ALU drive-on ramps at the rear of the vehicle
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area bevel
- Lift axle on the front axle with control by TEBS-E in accordance with current axle load and loading condition
- Four warning panels, approx. 400 mm extendable, size approx. 423 x 423 mm, equipped with position lamps
- Bracket for revolving beacon on the warning panels
- Wireless remote for rear steering, in addition to cable remote, with indicator lights on the receiver for axle alignment monitoring
- Painted sand coating on the checker plate sections of the gooseneck and platform as anti-slip protection
- 80 km/h speed limit sticker at rear and on both sides
- Load gauge for determining axle loads, including load diagram
Kledpoykpbkefx Ahzsn

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.