Kullanılmış Meusburger 3-Achs-Tele-Semi Mit 1 Paar Radmulden satın al (61.693)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Çağrı
Koşul: yeni, boş ağırlık: 17.500 kg, azami yük ağırlığı: 43.500 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.550 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 400 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing the loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and removable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, “SUPER LOW” design, length approx. 7,550 mm
Hedpeh Hm Thsfx Ai Eon
- Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- Supply lines routed protected inside the extendable beams and automatically adjust to the respective lowbed length
Rear running gear:
- Rear running gear with closed outer frame, chequer plate covering, and continuous prism-shaped excavator recess, approx. 1,450/900 x 505 mm, open at rear
- 2 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame
Axles and tyres:
- “PENDLE-AXLE”, all axles forced-steered by hydromechanics
- Burst protection valve on axle compensation cylinder with automatic RESET feature
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- 245/70 R 17.5 tyres / 3PMSF
Accessories included:
- Prepared for mounting attachable container positions for 1x 20ft or 1x 40ft container on the outer beams
- 2'' king pin
- One galvanized steel front wall approx. 400 mm high
- One spare wheel with bracket
- At the galvanized front connection strip: yellow-red air couplings
- 4 wheel chocks
- Remote steering from front and rear by cable remote control with push buttons, including track alignment monitoring for the axles
- Hydraulic couplings from gooseneck to lowbed with multi-coupling system instead of screw couplings
- Electro-hydraulic unit
- White reflector tape according to EU regulations on the sides, extension, and red at the rear
- 2 wooden blocks 500x250x200 mm
- European reflector plates (red-yellow) at the rear of the trailer
- On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps for NLGI-2 standard grease
- Load pressure gauge to determine axle loads, including load chart
- On the gooseneck, plug-in ALU side and rear walls approx. 2,000 x 400 mm
- The rear galvanized plug-in posts are removable (body length approx. 2,120 mm)
- Separate air connection with air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Gooseneck closed at the rear upper section with a removable cover
- 1 pair of steel ramps to bridge the mountings of the lowbed
- Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm
- Radio remote control for the steering in addition to the cable remote, with indicator lights on receiver for track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the loading platform
- Folding extensions, approx. 230 mm per side
- Anti-slip sand layer painted on the loading platform
- Dipper recess on the rear running gear closed at the front and rear with plug-in plates
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (Zinc 85% - Alu 15%)
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-zwangsgel.
Çağrı
Koşul: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 35.400 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 940 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Loading platform:
- Loading platform with extendable design
- Loading platform with hardwood planks, approx. 500 mm x 8° rear chamfer
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- Cut-outs in the outer frame of the loading platform for attaching tension straps
Brake system:
- Brake system compliant with EU regulations with EBS-E (2S2M)
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) topcoat, single-color in Novagrau (Nova grey)
- Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not available
Hjdjl Ux Rwopfx Ai Eon
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel construction:
- Steel construction made of high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
Electrical system:
- Electrical system according to EU regulations, LED lighting 24 Volt
- Sockets: 2x 7-pin & 1x 15-pin
Axles and tires:
- BPW axles, air-suspended, with disc brakes (377 mm), with lift/lower function
- Hydro-mechanically forced steering
- Axle tool kit
- Twin tires 235/75 R 17.5
Included accessories:
- Yellow-red air couplings on the galvanized front connection rail
- 4 chocks with holders
- 2" king pin
- Galvanized steel front wall approx. 1600 mm high
- White reflective tape as per EU regulations on sides, extension, and rear in red
- Loading platform with heavy-duty hardwood floor
- Steering from front and rear via cable
- Remote control via push buttons with single-track axle monitoring
- Radio remote control for auxiliary steering
- 9 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
- Galvanized folding supports under the loading platform chamfer
- Sliding hook-in rail for ALU ramps at the rear of the vehicle
- European reflective signs (red-yellow) at the rear of the trailer
- One mudflap at the rear of the trailer
- One bracket for a rotating beacon at the rear of the trailer
- On the gooseneck and on the left/right rear panel each: one holder for warning signs including socket
- INOX toolbox 1,500 x 390 x 810 under the loading platform on the right (direction of travel)
- BEKAMAX (Pico) central lubrication system with standard grease NLHI-2 and removable guard for the pump
- 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft container, or 1x 40ft container, with additional locking point in the extension for a 45ft container
- 4 pairs of cross-mounted stake pocket rails in the loading platform, for plug-in stanchions 100 x 50 mm
- Lift axle at the front axle with TEBS-controlled adjustment, depending on current axle load and loading status
- Speed stickers 80 km/h at rear and both sides
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light
- Holder for rotating beacon on warning signs
- Load pressure gauge for axle load determination, including load diagram
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel construction shot-blasted, then defined visible areas hot-finished metallized with ZINACOR 850 (Zinc 85% - Alu 15%)
Küçük ilan
Bakum
2.574 km
Alçak şasi dorse
NOOTEBOOMES-GE 3 Achs Tele, SAF
Çağrı
Koşul: ikinci el, boş ağırlık: 14.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/1999, süspansiyon: hava, lastik boyutu: 235/75 17,5, lastik durumu: 50 yüzde, renk: yeşil, Üretim yılı: 1999, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 68575
Nooteboom, Euro norm
* Year of manufacture: 1999
* ABS (Anti-lock Braking System)
* Air suspension
* Suspension type: Air
* Gross vehicle weight: 48,000 kg
* Unladen weight: 14,100 kg
* Payload: 33,900 kg
* Permissible total weight: 48,000 kg
* Axle manufacturer: SAF
* Tire condition 1st axle: 50% / 50% - Tire dimension: 235/75 R17.5
* Tire condition 2nd axle: 40% / 40% - Tire dimension: 235/75 R17.5
* Tire condition 3rd axle: 50% / 50% - Tire dimension: 235/75 R17.5
* Tire size: 235/75 R17.5
Hsdpfxsyibz Re Ai Esn
* Manufacturer: ES-GE
* 3rd axle hydraulically forced-steered
* Extendable up to 9,950 mm
* Telescope extension defective
* Loading area: 10,990 mm
Disclaimer:
Specifications subject to change without notice, prior sale, and errors excepted.
More pictures and videos are available on our website.
Our comprehensive service includes, for example:
* Purchase / sale / rental of commercial vehicles
* Fast and straightforward financing
* Processing of all (export) documentation
* Arrangement of export / customs number plates
* Vehicle preparation: new tarpaulins, signwriting, painting, etc.
* Professional loading / load securing
* TÜV inspections, registration service
* Transportation of commercial vehicles
Please contact our trained staff—we are happy to advise you.
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
KÄSSBOHRERMega Tele HD Plattform Auflieger mit Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.581 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 15.850 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Kässbohrer Mega Tele HD platform trailer with wheel recesses
TECHNICAL INFORMATION:
- Fifth wheel height: 950 mm
- Overall length: 13,535 mm
- Gooseneck length: 4,285 mm
- Platform length: 8,950 mm
- Extension: 6,900 mm
- Extension locking positions: 500 mm
- Gooseneck height: 120 mm
- Platform height (loaded): 1,040 mm
- Wheelbase: 7,700 mm
- Axle load: 10 tonnes
- Overall width: 2,550 mm
- Technical gross weight (80 km/h): 48,000 kg
- Technical gross weight (60 km/h): 50,000 kg
- Unladen weight: 10,419 kg
RUNNING GEAR:
- BPW axles with air suspension and drum brakes
- 2x rigid front axles, 1x rear trailing steering axle
- Air suspension incl. load gauge
- Wabco braking system
- Tyres: 12 x 245/70 R17.5
CHASSIS:
- High-quality, high-strength S700 MC steel chassis
- 30 mm thick hardwood floor
- 9x2 side extensions, extendable up to 300 mm
- Telescopic rear support winch with 50 tonne capacity
- Mechanically folding rear supports with 45 tonne capacity
- Wheel recesses: 420 mm deep, 800 mm wide, suitable for tyre diameters up to 1,800 mm
RAMP:
- Mountings for ramps at the rear of the vehicle
Hsdotn Hlmepfx Ai Ejn
LOAD SECURING:
- Lashing rings
- Stake pockets
- Stakes
- Container locks suitable for 1x20 ft, 1x40 ft or 1x45 ft containers + 4 twist locks
- Steel front wall, height 1,500 mm, with Code XL certificate
ACCESSORIES:
- 1x plastic toolbox
- Stake box with space for 18 stakes
- 1x beacon
- Bridge for wheel recesses to cover the recesses
- Ramp box
Chassis colour: Novagrau (New Grey)
For further information, feel free to contact us.
Küçük ilan
Petershagen
2.512 km
Çalışma platformlu yarı römork
KÄSSBOHRERMega Tele HD Plattform Auflieger mit Radmulden
Çağrı
Koşul: yeni, azami yük ağırlığı: 37.581 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 15.850 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, Brand new Kässbohrer Mega Tele HD platform trailer with wheel recesses
TECHNICAL INFORMATION:
* Fifth-wheel height: 950 mm
* Overall length: 13,535 mm
* Gooseneck length: 4,285 mm
* Platform length: 8,950 mm
* Extension: 6,900 mm
* Extension locking positions: 500 mm
* Gooseneck height: 120 mm
* Platform height (loaded): 1,040 mm
* Wheelbase: 7,700 mm
* Axle load: 10 tonnes
* Overall width: 2,550 mm
* Technical gross weight (80 km/h): 48,000 kg
* Technical gross weight (60 km/h): 50,000 kg
* Unladen weight: 10,419 kg
RUNNING GEAR:
* BPW axles with air suspension and drum brakes
* 2x fixed axles at the front, 1x self-steering axle at the rear
* Air suspension including load gauge
* Wabco braking system
* Tyres: 12 pieces 245/70 R17.5
CHASSIS:
* Chassis made of high-quality, high-strength S700 MC steel
* 30 mm thick hardwood floor
* 9x2 side extensions, extendable up to 300 mm
* Telescopic support winch at the rear with 50 tonne capacity
* Mechanically folding supports at the rear with 45 tonne capacity
* Wheel recesses measuring 420 mm deep, 800 mm wide,
suitable for tyre diameters up to max 1,800 mm
RAMP:
* Ramp mounts at the rear of the vehicle
Hjdpfomtwypsx Ai Een
LOAD SECURING:
* Lashing rings
* Stake pockets
* Stakes
* Container locks suitable for 1x20 ft, 1x40 ft or 1x45 ft + 4 twist locks
* Front wall made of steel, 1,500 mm high with Code-XL certificate
ACCESSORIES:
* 1x plastic toolbox
* Stake box with space for 18 stakes
* 1x beacon
* Wheel recess cover bridges for closing the wheel recesses
Chassis colour: RAL 3020 traffic red
For further information, we are at your disposal.
Küçük ilan
Dortmund
2.568 km
Platform
FaymonvilleMAX Trailer 3-Achs-Mega-Tele-Plateau-nachlaufgel.
Çağrı
Koşul: yeni, boş ağırlık: 8.300 kg, azami yük ağırlığı: 36.700 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.080 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22.5, renk: gri, Donanım: ABS, hidrolik arka platform, Loading Area:
Loading area, extendable design with pneumatically operated locking mechanism
Cut-outs in the outer frame of the loading area for securing straps to be hooked in
Landing Gear:
JOST landing gear (mechanical) with 2-speed gearbox for 24t lifting capacity
Axles and Tyres:
BPW axles, air-suspended, with disc brakes (430 mm), equipped with raise/lower function
Trailing steering axle with electro-magnetic reversing lock, activated via reverse gear or manually
Axle tool kit
Tyres: 385/65 R 22.5
Brake System:
Hsdpfxeikyh Ho Ai Eon
WABCO brake system compliant with EU regulations, with EBS-E
Paintwork:
Superior and durable corrosion protection for the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc-rich primer
High-quality two-component top coat, single-tone in MB 7350 Novagrau
tail section metallized and painted in RAL 9010
Metallic paint not possible
Steel Construction:
Steel construction made from high-strength fine-grained steels
Steel grades:
S355J2+N / S355MC
S690QL / S700MC
Electrical System:
Electrical system according to EU regulations
24 Volt ASPÖCK-NORDIK lighting
ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
Connections according to ISO
Accessories Included:
Front galvanized connection strip with yellow-red air couplings
Galvanized steel front bulkhead approx. 1,600 mm high, EN12642-XL
4 wheel chocks with brackets
White reflective tape on the sides, on the extension, and rear red tape according to EU regulations
European reflector plates at the rear of the trailer
Approx. 30 mm thick hardwood floor, enclosed in omega profiles
10 pairs of stake pockets for 100 x 50 mm insert stakes in the outer frame
1 spare wheel carrier beneath the loading area, right side (in driving direction)
Manual and operating instructions
Bracket for rotating beacon at the rear of the trailer
On the gooseneck and rear plate, left and right: bracket for warning signs including socket outlets
Central chassis with painted sand coating as anti-slip protection
6 pairs of WADER container pockets in the loading area: for 1x 20ft container, 2x 20ft containers, or for 1x 40ft container in the extension, an additional locking point is provided for a 45ft container
4 pairs of crosswise stake pocket strips mounted in the loading area, for insert stakes 100 x 50 mm
One galvanized crosswise bracket underneath the loading area, 2,390 x 720 x 400 mm
Access ladder mounted on the right (in driving direction)
Lifting axle on the front axle with TEBS E control, depending on the current axle load and current loading status
Load gauge for determining axle loads, including load chart
HRM metallization of the outer frame: Complete steel construction blasted, then defined visible areas metallized with ZINACOR 850 hot finish
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
Faymonville3-Achs-Mega-Tele-Plateau zwangsgelenkt
Çağrı
Koşul: yeni, boş ağırlık: 10.000 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 51.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Cargo area:
- Gooseneck, length approx. 4,100 mm with central beam
- Cargo area in extendable design, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps
- Pneumatic locking with conical locking pins and reinforced locking positions
- Supply lines are protected within the extendable beams and automatically adapt to the respective cargo area length
Axles, suspension, and tires:
- BPW axles and suspension, all axles hydro-mechanically forcibly steered
- Mounted on turntable
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- Tires: 235/75 R17.5 twin tires
Paintwork:
- 6-coat final treatment
- Entire steel structure shot-blasted after welding
- One coat of zinc-based primer, one coat of adhesion primer
- Final paint with two coats of 2-component acrylic paint, single color in MB 7350 Novagrau, then hollow sections sealed with special wax
Steel construction:
- Steel construction made from high-strength fine-grained steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355MPa)
- S690QL/S700MC (yield strength 690MPa)
- Welders certified according to DIN-EN 287-1
- MAG welding process according to EN ISO 4063, shielding gas M21 according to EN ISO 14175
Accessories:
- Steel front wall, approx. 1,600 mm high
- Round NATO socket on the front connection bar
- 3 kW electro-hydraulic unit for controlling hydraulic functions
- 4 pairs of recessed lashing rings in the outer frame of the gooseneck
- 4 pairs of stake pockets recessed in the outer frame of the gooseneck for stakes approx. 100x50 mm
- 1 cross stake pocket bar mounted in the gooseneck cargo floor for stakes approx. 100x50 mm (1x at the rear of the gooseneck)
- 2" kingpin
- Mechanical landing legs with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- Approx. 32 mm wooden floor encased in aluminum omega profiles on the gooseneck and cargo area
- One locking position per extension, approx. every 500 mm
Hjdpfx Aijiuy Nle Ejn
- 10 pairs of recessed horizontal lashing rings in the outer frame of the cargo area, foldable outward
- 6 pairs of stake pockets recessed in the outer frame of the cargo area for stakes approx. 100x50 mm
- 2 cross stake pocket bars installed in the cargo floor of the cargo area for stakes approx. 100x50 mm
- INOX toolbox approx. 1,250 x 500 x 550 mm
- Rear cross member with a bevel approx. 350 mm at 10°
- Integrated mounting rail for loose aluminum loading ramps at the rear cross member
- 1 pair of drop-leg supports at the rear cross member
- Fenders on all axles
- Central lubrication system with 1 pump
- Remote axle steering operated from front and rear via cable remote control with pushbuttons and single-track monitoring of the axles
- Under the gooseneck and on the left and right at the rear cross member, one 7-pin socket each for warning boards
- One 7-pin socket at the rear cross member
- Container locks "TWIST-LOCKS" in the cargo area for transporting 2x 20ft and 1x 40ft containers
- Radio remote control for axle steering in addition to cable remote control, with 2 indicator lights at the receiver for single-track monitoring
- 2 axle load gauges + axle load chart
- 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm
- Standard HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminum 15%) by hot finis
Küçük ilan
Dortmund
2.568 km
Platform yarı römork
FaymonvilleMAX Trailer-3-Achs-Mega-Tele-Plateau-nachlaufgel.
Çağrı
Koşul: yeni, azami yük ağırlığı: 36.020 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 435/50 R 19.5, renk: gri, Donanım: ABS, Cargo Area:
- Extendable cargo area design with pneumatically actuated locking
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of fold-out lashing rings (LC 5,000 daN)
- 2 pairs of fold-out lashing rings (LC 10,000 daN)
- Cut-outs in the external frame of the cargo area for securing belts
Axles and Tyres:
- BPW axles, air-suspended, with disc brakes (377 mm), height adjustment function (raise/lower)
- Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually
- Axle tools included
- Tyres: 435/50 R 19.5
Brake System:
- Brake system compliant with EU regulations, with EBS-E (2S2M)
Paintwork:
- First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component zinc dust primer (2K)
- High-quality single-tone two-component topcoat (2K) in Novagrau
- Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not possible
Landing Gear:
- JOST landing gears (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)
Steel Construction:
- Steel construction from high-tensile fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical System:
- Electrical system compliant with EU regulations, 24 V ASPÖCK-NORDICK (ASS3) lighting
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S and 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Accessories Included:
- Yellow-red air couplings on the galvanized front connection panel
- 2 wheel chocks with brackets
- 2" king pin
- Galvanized steel front wall approx. 1,600 mm high
- Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer
- European reflective plates (red-yellow) at the rear of the trailer
- Cargo floor made of approx. 38 mm thick hardwood
- 10 pairs of stake pockets for 100 x 50 mm plug-in stakes integrated in the external frame of the cargo area
- 1 spare wheel holder under the cargo area on the right in driving direction
- Manual and documentation on USB stick
- 1 mud flap at the rear of the trailer
- 1 bracket for a beacon at the rear of the trailer
- At the goose neck and on each side of the rear panel, 1 bracket for warning signs incl. socket
- 1 INOX toolbox, crosswise under the cargo area (1,000 x 400 x 2,500 mm)
- 6 pairs of WADER container locks in the cargo area for 1 x 20ft container, 2 x 20ft containers or 1 x 40ft container; an additional locking position in the extension for one 45ft container
Hjdei Dwlwspfx Ai Esn
- 3 pairs of transverse stake pocket rails installed across the cargo area for 100 x 50 mm plug-in stakes
- 60 km/h speed sticker at the rear
- 2 reversing lights mounted on the rear panel
- Four warning signs, extendable by approx. 400 mm (approx. 423 x 423 mm), with position light
- Mounting bracket for beacon on the warning signs
- HRM metalization (High Resistance Metallisation) of the external frame
- Complete steel structure shot-blasted; then, the defined visible surfaces are metal-coated with ZINACOR 850 (zinc 85% - aluminum 15%) by thermal spraying
Küçük ilan
Dortmund
2.568 km
Platform
FaymonvilleMAX Trailer 3-Achs-Tele-Plateau-zwangsg.
Çağrı
Koşul: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 38.700 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.200 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5, renk: gri-siyah, Donanım: ABS, Loading Platform:
• Loading platform in extendable design with pneumatically operated locking mechanism
• Loading platform with approx. 30 mm thick wooden floor
• 7 pairs of outward-folding lashing rings (LC 5,000 daN)
• 3 pairs of outward-folding lashing rings (LC 10,000 daN)
• Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)
Axles and Tyres:
• BPW axles and suspension, all axles hydro-mechanically forced steered
• Equipped with disc brakes
• Technical axle load: 10,000 kg
• Air suspension with raise/lower valve
• Axle tools
• Tyres: 385/65 R 22.5
• TPMS (Tyre Pressure Monitoring System) according to ECE R 141
Brake System:
• WABCO brake system compliant with EU regulations, with EBS-E (2S2M)
Electrical System:
• Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
• ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin
• Connections according to ISO standards
• 24N ISO-1185
• 24S ISO-3731
• 15-pin ISO-12098
Accessories Included:
• Remote-controlled steering from front and rear via cable remote with push-button operation, including single-track monitoring of axles
• 4 wheel chocks with holders mounted on the front wall
• 2" kingpin
• One galvanized steel front wall approx. 1,600 mm high
• Yellow-red air couplings mounted on the galvanized front connection bar
• White reflective tape according to EU regulations on the sides, at extension and at the rear of the trailer in red
• European reflective plates (red-yellow) on the rear of the trailer
• One mudflap at the rear of the trailer
• Manual and description
• Mounting bracket for a beacon at the rear of the trailer
• Loading platform with approx. 30 mm thick wooden floor enclosed in omega profiles
• 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform
Hedpfx Aijiu Etrs Esn
• 1 spare wheel holder under the right side of the loading platform in the direction of travel
• Electro-hydraulic unit
• On the gooseneck and rear apron left and right, each with a bracket for warning boards including socket
• Painted sand layer for anti-slip protection on the main beam
• 6 pairs of WADER container locks on the loading platform, for 1x20ft, 2x 20ft, or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container
• 4 pairs of crosswise mounted stake pocket bars on the loading platform for plug-in stanchions 100 x 50 mm
• Access ladder mounted on the right in the direction of travel
• One HDPE toolbox approx. 1,200 x 500 x 480 mm in front under the loading platform on the left in the direction of travel
• BEKAMAX central lubrication system (Pico) with removable pump guard
• Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition
• Wireless remote control for the rear steering in addition to the cable remote, with indicator lights on the receiver for single-track monitoring
• Four extendable warning plates approx. 400 mm extension, size approx. 423 x 423 mm with position light
• Bracket for beacon on the warning plates
• 80 km/h speed stickers on the rear and both sides
• Load pressure gauge to determine axle loads, including load diagram
• HRM metallization (High Resistance Metallisation) of the outer frame
• Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-finished
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 4-Achs-Mega-Tele-Semi-niedri
Çağrı
Koşul: yeni, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, işletme ağırlığı: 10.600 kg, Donanım: ABS, Swan-neck:
- Swan-neck with 30 mm thick hardwood flooring
- Swan-neck at the rear in straight design
- 3 pairs of lashing rings (LC 5,000 daN)
Extendable loading platform:
- Loading platform in extendable version
- 5 pairs of fold-out lashing rings
- 3 pairs of fold-out lashing rings
- 1 pair of horizontal lashing rings at the front of the loading platform
- Cut-outs in the outer frame of the loading platform for attaching tension belts
- Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Landing legs:
- JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Hedpfxst Ag Uwo Ai Ejn
Axles and tyres:
- BPW axles, two fixed and two steering axles
- Air suspension, drum brakes, with lift/lower function
- The steering axles can be locked electro-magnetically via reverse gear or manually
- Axle tools
- Tyres: 205/65 R17.5
Brake system:
- Brake system according to EU regulations with EBS-E (4S3M)
Steel construction:
- Steel structure made of high-strength fine-grain steels
- Steel grades:
- S355J2+N/S355MC (yield strength 355 MPa)
- S690QL/S700MC (yield strength 690 MPa)
Electrical system:
- Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX at the front connection strip, with 24N, 24S & 15-pin sockets
- Connections according to ISO:
- 24N ISO-1185
- 24S ISO-3731
- 15-pin ISO-12098
Paintwork:
- First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
- High-quality 2-component (2K) top coat, single colour in Nova grey
- Rear section metallized and painted in RAL 9010 (pure white)
Included accessories:
- One spare wheel with holder located in front of the bulkhead
- 2" king pin
- Galvanized steel front wall approx. 400 mm high
- Yellow-red air couplings on the front galvanized connection strip
- 4 wheel chocks with holder at the bulkhead
- Galvanized folding supports under the sloped part of the loading platform
- Holder for rotating beacon at the rear of the trailer
- Galvanized, extendable width extensions approx. 230 mm per side
- White reflective tape according to EU regulations on sides, at extension section, and red at rear
- On swan-neck and rear panel: one mount each for warning panels including socket (left and right)
- European reflective warning boards (red-yellow) at the rear of the trailer
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- On the swan-neck: removable ALU side panels and tailboard approx. 2,440 x 400 mm
- The rear, galvanized stanchions are removable (length of superstructure approx. 2,560 mm)
- 7 pairs of WADER container locks
- 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the swan-neck; 2x 20ft containers
- 7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the loading platform
- Lift axle at the front axle, controlled by TEBS E in relation to current axle load and loading status
- Sliding hook-in rail for ALU loading ramps at the rear of the vehicle
- Sanded, anti-slip coating painted onto checker plate on swan-neck and loading platform
- Four warning panels extendable by approx. 400 mm each, approx. 423 x 423 mm, with a position lamp
- Mount for rotating beacon on warning panels
- Speed stickers 80 km/h at the rear and on both sides
- Load gauge to determine axle loads, including load chart
Küçük ilan
Dortmund
2.568 km
Düşük yükleyici
Faymonville5-Achs-Tele-Semi m. hydr. Rampen
Çağrı
Koşul: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck:
Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10°
Technical fifth wheel load: 23,000 kg
For tractor units: 6x2, 6x4 and 8x4
Loading Platform:
Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10°
A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm
Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length
Axles and Tyres:
BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered
Technical axle load: 12,000 kg
Air suspension with lift and lower valve
Axle tool
235/75 R 17.5 3PMSF twin tyres
Hsdpfxjmfqi Is Ai Ejn
Load index 143/141J (144/144F)
Two-part Steel Ramps:
One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
Hardwood covering
Hydraulically folding ramp tips
Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward
Braking System:
WABCO EBS-E brake system in compliance with EU regulations
Sockets and Lighting:
24-volt lighting system
Full Metallization:
Complete HRM metallization with ZINACOR 850 for optimal corrosion protection
Surface Treatment:
Entire steel structure shot-blasted automatically after welding using a blast wheel
Second blasting with corundum for optimal coating adhesion
Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax
Rims in silver grey
Steel Structure:
Steel structure made from high-tensile fine-grained steels
Steel grades: S355J2+N/S355MC, S690QL/S700MC
Accessories:
Plug-in steel front wall, approx. 400 mm high
Connection strip for supply lines to the tractor unit
Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches
Outer beam of gooseneck with mounting holes for bolted lashing rings
First hole approx. 200 mm from the front, then every approx. 400 mm
One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring
Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area
Gooseneck guide plate for the saddle plate, approx. 500 mm wide
Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles
Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate
Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform
1 sliding intermediate table for the telescopic tube with large cross-section
Operating valves for hydraulic ramps on right side of vehicle
Central lubrication system with 1 pump, standard grease according to NLGI-2
Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici yarı römork
FaymonvilleMAX Trailer 3-Achs-Semi-nachlaufgelenkt
Çağrı
Koşul: yeni, boş ağırlık: 7.900 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, işletme ağırlığı: 7.900 kg, Donanım: ABS, Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring
Loading Area:
- Loading area with rear bevel approx. 1,000 mm x 8°
- Recess in the bevel and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm
- Cut-outs in the outer frame of the loading area for attaching tensioning straps
- Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Gear:
- JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity 24 t (test load 50 t)
Hodpfx Aieunraps Een
Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reversing lock, activated via reverse gear and manually
- Air suspension with lift and lower valve
- TPMS tyre pressure monitoring system as per ECE R 141
- Tyres: 235/75 R 17.5
Paintwork:
- Complete steel structure automatically blasted with shot blasting machine after welding
- Second blasting with corundum for optimal coating adhesion
- Final painting with 2 coats of 2K topcoat, single colour RAL MB 7350 Novagrau
- Rims painted silver
- Rear section metallised and painted RAL 9010 (Pure White)
- Cavities sealed with special wax
Electrical System:
- Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
- ASPÖCK-UNIBOX on the front connection bar with sockets: 2 x 7-pin & 1 x 15-pin
Accessories Included:
- Numerous lashing positions
- 2" king pin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised front connection bar
- 4 wheel chocks with holder on the front wall
- Holder at the rear of the gooseneck for ALU loading ramps
- Galvanised folding support legs under the rear bevel of the loading area
- Holder for rotating beacon at the rear of the trailer
- Galvanised, extendable widenings approx. 230 mm per side
- White reflective tape to EU regulations on the sides, red at the rear
- Holders for warning panels with socket at the gooseneck and rear crossmember, left and right
- Removable ALU sideboards and rear board on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanised stakes
- 2 pairs of WADER container pockets in the loading area for a 20ft container
- 6 pairs of post pockets (for 100 x 50 mm stakes) in the outer frame of the loading area
- Movable mounting bar for ALU loading ramps at the rear of the vehicle
- 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area bevel
- Anti-slip sand coating applied to checker plates on gooseneck and loading area
- Four extendable warning signs, approx. 400 mm extension, size 423 x 423 mm, each with a position light
- Bracket for rotating beacon on the warning signs
- 80 km/h speed stickers at rear and on both sides
- European reflector panels (red/yellow) at rear of trailer
- Manual and operating instructions on USB stick
- HRM metallisation (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then all defined visible surfaces hot-finish metallised with ZINACOR 850 (zinc 85% - alu 15%)
Küçük ilan
Dortmund
2.568 km
Açık kasa ve brandalı treyler
FaymonvilleMT 3-Achs-Jumbo-Semi-Rampen-Planenaufb.
Çağrı
Koşul: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 30 mm thick hardwood flooring
- 3 pairs of lashing rings
Two-part steel ramps:
- One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface
- Ramps with hydraulically foldable ramp sections and hydraulic lifting system
- Maximum load per pair: 30,000 kg
Loading platform:
- Loading platform with rear chamfer approx. 1,000 mm x 8°
- Approx. 48 mm hardwood flooring, over the axles with checker plate surface
Axles and tires:
- BPW axles and suspension, two rigid axles, one self-steering axle
- Air suspension with lift and lower valve
- Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually
- Tires 235/75 R17.5 3PMSF
Accessories included:
- 1 spare wheel with holder
- TPMS tire pressure monitoring system according to ECE R 141
- 2" king pin
- One galvanized steel headboard
- Yellow-red air couplings on the galvanized connection rail at the front
- 4 chocks with holders on the headboard
- Mounting at the rear of the gooseneck for ALU drive-on ramps
- 3 height levels of aluminum planks
- Galvanized folding supports under the chamfer of the loading platform
- Height-adjustable tarpaulin frame (3,960 mm)
- Galvanized headboard with tensioning mechanism for sliding curtain
- Height adjustable by approx. 400 mm
- Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall
- 3 pairs of sliding stakes in the loading platform
Hsdpfx Aijtvfkfo Ejn
- Body rear left and right hydraulically extendable by approx. 750 mm
- Sliding roof with pivotable portal beam
- Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm
- Upper edge of structure approx. 3,960 mm high
- Driving with open sliding roof is not permitted and will cause damage to the curtain
- Cover plates for bridging the gap between ramps and loading platform
- Electro-hydraulic unit at the rear, beneath the loading platform
- At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket
- Control valves for the ramps positioned on the right trailer side
- 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform
- Lift axle at the front axle
- Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm)
- One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles
- On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance
- Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump
- Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light
- Load pressure gauge for determining axle loads including load chart
- HRM metallization (High Resistance Metallization) of the outer frame
- Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL2achs, 21to,Agrar, Stahl,3 Seitenkip. -Bordmatik
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0:
----Axles:
* Gigant axles
* Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS)
Hjdpoy Tr Hiofx Ai Ejn
* 1st axle as lift axle (fully automatic)
* Forced lowering and lifting of the lift axle via an additional switch in the tractor
* Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab)
----Brakes:
* EBS (electronic braking system with RSS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Tyres:
* 600/55 R 22.5
----Suspension:
* Air suspension with level control during tipping operation
----Electrics / Lighting:
* 13-pin 12V power connector
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* LED rear lights 12 / 24 V with galvanized protective housing
----Drawbar / Flange eye:
* Drawbar with adjustable K80 ball coupling
----Coupling height:
* Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines
----General attachments:
* Support winch at the front
* Bolt-on steel underrun protection
* Plastic quarter mudguards before the first and after the last axle
* Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads)
----Chassis:
* Chassis made of fine-grained steel
----Tipping body:
* Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking)
* 5mm steel floor made of HARDOX-450 or equivalent
----Load securing:
* 4 x 3 t UVV lashing rings recessed in the outer frame on each side
----Paintwork:
* Axles, air tank, support winch, flange eye painted in black tone
* Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion
* Chassis, protective grille for rear lights, hot-dip galvanized
----Info:
* Sample images
----Delivery time:
* The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.
Küçük ilan
Egestorf
2.485 km
Üç yöne devirmeli römork
MÜLLER-MITTELTAL2achs, 21to,Agrar, Stahl,3 Seitenkip. -Bordmatik
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0:
----Axles:
* Gigant axles
* Start-up aid for maneuvering on the 1st axle (activated via EBS)
* 1st axle as lift axle (fully automatic)
* Forced lowering and raising of the lift axle via an additional switch in the tractor unit
* Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab)
----Brakes:
* EBS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Tyres:
* 600/55 R 22.5
----Suspension:
* Air suspension with level control during tipping process
----Electrics / Lighting:
* 13-pin 12V power connector
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* LED rear lights 12 / 24V with galvanized protective housing
----Drawbar / Flange Tow Eye:
* Drawbar with K80 ball coupling, adjustable mm (dimensions not specified)
----Coupling Height:
* Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines
----General Attachments:
* Landing leg at the front
Hsdpfx Aey Tr Hcei Esn
* Bolted steel underrun protection
* Plastic quarter mudguards before the first and after the last axle
* Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads)
----Chassis:
* Chassis made of fine-grained steel
----Tipping Platform:
* 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter)
* Left side wall foldable with drop-side hydromat
* Tailgate swinging via automatic hook lock
* 5mm steel floor made of HARDOX-450 or equivalent
----Load Securing:
* 4 x 3 ton UVV lashing rings recessed on each side in the outer frame
----Painting:
* Axles, air tanks, landing leg, flange tow eye painted in black
* Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion
* Chassis, protective grilles for rear lights, hot-dip galvanized
----Notes:
* Sample images
----Delivery Time:
* The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026
Küçük ilan
Tilburg
2.718 km
Bavul
Schmitz CargobullSKO 24/L-13.62 FP25 EXPRESS-2 SKO 24, 3 Achsen,...
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 05/2009, toplam uzunluk: 13.900 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65/22.5, dingil mesafesi: 9.000 mm, renk: beyaz, Üretim yılı: 2009, Donanım: ABS, = Diğer opsiyonlar ve aksesuarlar =
- Disk frenler
= Diğer bilgiler =
Aks konfigürasyonu
Lastik ölçüsü: 385/65/22.5
Frenler: Disk frenler
Süspansiyon: Havalı süspansiyon
Arka aks 1: Maks. aks yükü: 9.000 kg; Sol lastik diş derinliği: %20; Sağ lastik diş derinliği: %20
Arka aks 2: Maks. aks yükü: 9.000 kg; Sol lastik diş derinliği: %10; Sağ lastik diş derinliği: %10
Arka aks 3: Maks. aks yükü: 9.000 kg; Sol lastik diş derinliği: %30; Sağ lastik diş derinliği: %30
Ağırlıklar
Boş ağırlık: 7.596 kg
Yük kapasitesi: 31.404 kg
Azami yüklü ağırlık: 39.000 kg
Durum
Teknik durumu: çok iyi
Görsel durumu: çok iyi
Hjdpoy Dftwefx Ai Ejn
Diğer bilgiler
Daha fazla bilgi için Bas Wolfs ile iletişime geçebilirsiniz.
Küçük ilan
Landsberg am Lech
2.201 km
Alçak şasi dorse
MEUSBURGERMTS3 12 t Achsen ,ausziehbar, gelenkt ,
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps
STZ-L gooseneck
- robust steel welded construction
- designed loading area: 3,950 x 2,480 mm including bevel
- hydromechanical forced steering (dual circuit steering)
- turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge
- fifth wheel load: 24 t
- steering radius to rear: 2,600 mm
Loading Area
- recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed
- extendable by 2,053 mm
- including aluminium bridging ramps for creating a level platform
- excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep
- rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm
- one pair of wheel recesses in the lower loading area
- hydraulically suspended 3-axle chassis
- split Gigant axles with 600 mm lift
Hodpfx Aiow Etd Ts Esn
Rear of vehicle
- design: “Beveled” 500 mm
- hydraulic rear support
Drive-on ramps
- two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm
- rubber coating with climbing strips
Braking System
- two-line all-wheel pneumatic brake system with diaphragm brake cylinders
- automatic load-dependent brake (ALB)
- automatic linkage plates (AGS)
- parking brake via spring-loaded cylinders
- ABS/ABV brake
Special equipment
Radio remote control for steering and ramp control
Central lubrication system
Technical data
Gooseneck
Loading area (LxW): 3,950 x 2,480 mm
Saddle height loaded: 1,300 mm
Loading area
Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm
recessed outer sections 4,630 mm long plus 2,053 mm extension
center beam 980 mm
excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep
Steering
1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)
Küçük ilan
Riederich
2.330 km
Kutu dorse
SCHMITZ CARGOBULLKRONE 2-Achs ISOLIER-Koffer 13,40 m*29 T zGG
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 7.390 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2004, bir sonraki muayene (TÜV): 12/2025, yükleme alanı uzunluğu: 13.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 89 m³, Üretim yılı: 2004, Donanım: ABS, KRONE 2-axle INSULATED box body 13.40 m with swing doors
* Gross vehicle weight rating 29,000 kg = payload approx. 21,840 kg
* New TÜV inspection available at extra cost
* Vehicle No. for customer enquiries: 3271
* ABS
* Eberspächer cargo area heating
* BPW axles
* 2-axle version
Hjdpekf Snqsfx Ai Ejn
* EBS by Wabco
No liability for printing and typing errors
Sale only to commercial customers
Subject to prior sale and error. Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the sense of sales law. The description in the sales contract is binding.
* TOP SERVICE + QUALITY
* We can provide you with a LEASING-FINANCING-HIRE PURCHASE offer
Guarantee insurance available on request from the insurer
* TÜV / UVV tail lift inspection / tachograph testing and installation of OBU device can be arranged locally through our partners
* Zoll (export) license plate valid for 30 days
All export customs documents are possible, but need to be requested individually
* TOLL for Toll-Collect bookings available in-house
* Free transfer from Stuttgart airport or Metzingen railway station (Württ)
* ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH * Andreas Pittas * Thomas Pittas
* Alexander Pittas * Robin Pittas
WHATSAPP number * *
---- Visit us on our website at
* over 200 vehicles in stock at all times
Küçük ilan
Riederich
2.330 km
Kutu dorse
SCHMITZ CARGOBULL2 Achs Isolierkoffer13.40 m LBW
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 7.390 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2004, bir sonraki muayene (TÜV): 10/2024, yükleme alanı uzunluğu: 13.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 89 m³, toplam genişlik: 2.600 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2004, Donanım: ABS, * SCHMITZ 2-axle insulated box body, 13.40 m, with rear portal doors
* Permissible gross weight: 29,000 kg – payload approx. 21,840 kg
* New TÜV (roadworthiness inspection) possible at extra cost
* Vehicle reference number for customer inquiries: 3271
* Tail lift
Hedeq U Nqgspfx Ai Esn
* ABS
* Eberspächer cargo area heater
* BPW axles
* 2-axle configuration
* EBS (Wabco)
No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and changes. All information is non-binding; only the description in the sales contract is legally binding.
?TOP SERVICE & QUALITY
* We are happy to provide a leasing, financing, or hire purchase offer
* Warranty insurance available upon request from the insurer
* TÜV / UVV tail lift inspection / tachograph check and installation of OBU device by our local partners
* Customs license plates available for 30 days
* All export customs documents can be arranged individually on request
* Toll booking via Toll-Collect available in house
* Free transfer from Stuttgart Airport or Metzingen train station
* ARRIVAL STATION: 72555 METZINGEN (WÜRTT)
* FOR ENGLISH CONTACT: Andreas Pittas, Thomas Pittas, Alexander Pittas, Robin Pittas
WHATSAPP NUMBER*
----* Visit our website at
* Always over 150 vehicles in stock
Küçük ilan
Riederich
2.330 km
Kutu dorse
SCHMITZ CARGOBULL2 Achs Isolierkoffer13.40 m LBW Heizung
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 7.390 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2004, bir sonraki muayene (TÜV): 07/2024, yükleme alanı uzunluğu: 13.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 89 m³, toplam genişlik: 2.600 mm, toplam yükseklik: 3.800 mm, Üretim yılı: 2004, Donanım: ABS, * Schmitz 2-axle insulated box body 13.40 m with rear portal doors
* Permissible total weight: 29,000 kg = payload approx. 21,840 kg
New TÜV inspection available at extra cost
* Vehicle no. for customer inquiries: 3271
* Tail lift
* ABS
* Eberspächer cargo compartment heater
* BPW axles
* 2-axle unit
* EBS by Wabco
Hjdpfeq U Nqkjx Ai Eon
No liability for typographical or transcription errors. Sale to commercial customers only. Subject to prior sale and errors. Changes, prior sale, and errors expressly reserved. The description serves for vehicle identification and does not constitute a warranty in the legal sense. The decisive description is the one stated in the purchase contract.
TOP SERVICE + QUALITY
* We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer
* Warranty insurance available on request from the insurance provider
* TÜV / UVV tail lift / tachograph inspection and installation of an OBU device by our on-site partners
* Export license plates valid for 30 days
* All customs export documents are available upon request (to be requested individually)
* Toll payment for Toll-Collect can be arranged in-house
* Free transfer from Stuttgart Airport or Metzingen Train Station (Württ)
* ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH: Andreas Pittas, Thomas Pittas,
* Alexander Pittas, Robin Pittas
WHATSAPP number*
----* Visit our website at
* Constant stock of over 150 vehicles available
Küçük ilan
Riederich
2.330 km
Frigorifik yarı römork
SCHMITZ CARGOBULLKRONE 2-Achs ISOLIER-Koffer 13,40 m*29 T zGG
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 7.390 kg, toplam ağırlık: 29.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2004, bir sonraki muayene (TÜV): 12/2025, yükleme alanı uzunluğu: 13.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 2.640 mm, yükleme alanı hacmi: 89 m³, Üretim yılı: 2004, Donanım: ABS, KRONE 2-Axle INSULATED Box Body 13.40 m with Rear Portal Doors
* Permissible total weight: 29,000 kg = Payload approx. 21,840 kg
* New TÜV inspection available at extra cost
* Vehicle no. for customer inquiries: 3271
* ABS
* Eberspächer cargo compartment heating
* BPW axles
* 2-axle
* EBS by Wabco
No liability for printing or typographical errors
Sale to trade customers only
Subject to prior sale and errors* Changes, prior sale, and errors are expressly reserved. The description serves for vehicle identification and does not constitute a guarantee in terms of sales law. The agreement in the purchase contract is binding.
* TOP SERVICE + QUALITY
* We can provide you with a LEASING, FINANCING, or HIRE PURCHASE offer
* Warranty insurance available from insurer on request
* TÜV / UVV tail lift / tachometer tests and installation of OBU-unit by our local partners
Hodpjkf Snxsfx Ai Esn
* 30-day export plates available
* All export customs documents can be provided if requested individually
* Toll-Collect for MAUT can be booked with us
* Free transfer from Stuttgart airport or Metzingen (Württ) railway station
* ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH: Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas
WHATSAPP number * *
---- Visit us on our website at
* Over 200 vehicles always in stock
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT 3 3 Achs Tieflader- Anhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: !
Hjdpfx Aijzai Dds Esn
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Çağrı
Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Hedpfx Aozacl Iji Ejn
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalT3 3 Achs Tiefladeranhänger
Çağrı
Koşul: ikinci el, boş ağırlık: 6.200 kg, azami yük ağırlığı: 23.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2006, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: !
Hodpfxjy T E Dnj Ai Eon
Küçük ilan
Schwebheim
2.317 km
Alçak şasi römork
Müller MitteltalPT 30 3 Achs Tieflader 9,20 m Ladefläche
Çağrı
Koşul: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: !
Hodpfxey Tln Te Ai Esn
Sizin için aramayı kolaylaştırıyoruz: "meusburger 3-achs-tele-semi mit 1 paar radmulden"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.





































































































































































































































