Kullanılmış Meusburger Semirimorchio Centinato Ribassato Buche Usato satın al (301)

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 12.100 kg, azami yük ağırlığı: 35.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 07/2015, yükleme alanı uzunluğu: 13.760 mm, yükleme alanı genişliği: 2.550 mm, toplam uzunluk: 14.180 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.630 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, dingil mesafesi: 1.310 mm, azami hız: 90 km/s, renk: turuncu, römork freni: frenli römork, Üretim yılı: 2015, Donanım: ABS, MEUSBURGER MTS-3 Low loader from first owner, regularly serviced and in very good condition! Less than 400,000 km. New general inspection (TÜV), Available with MAN TGX 18.440 BLS tractor unit, first registration 07/2015, 400,000 km, for an additional charge. 3x BPW ECO axles with air suspension, 1st axle liftable, 3rd axle as friction steered trailing axle with electric and mechanical lock. Rear axle steering via two hydraulic cylinders for maneuvering, controlled by remote control. Gross weight (2-axle tractor): 48,000 kg, Gross weight (3-axle tractor): 57,000 kg, Fifth wheel load: 18,000 kg, Payload (2-axle tractor): 28,500 kg, Payload (3-axle tractor): 36,000 kg, Rear axle load: 30,000 kg, Unladen weight: 12,100 kg, Overall width: 2,550 mm, Neck deck length approx. 4,015 mm, front taper approx. 500 x 56 mm, Lowered deck length approx. 9,750 mm, rear taper approx. 1,000 x 100 mm, Loading height approx. 920 mm, Fifth wheel height approx. 1,120 mm, Front drop-leg supports, Hydraulic rear supports powered by electro-hydraulic unit for the ramps, Wheelbase: 1,310 / 1,410 mm, Centralized grease lubrication system with electric pump, Iaodpoyigq Rjfx Ag Nsr LED work lights, Deck: Hot-dip galvanized pressed grating, 30/30/5 mm, over full load area in the lowered bed, ramps, and upper deck, Ramps: Special 2-piece ramps with mechanical extension, approx. 2,850 + 1,850 mm length, max. 8° slope. Ramp width approx. 800 mm, center adjustable down to approx. 50 mm. Hydraulically adjustable sideways to overall width of 2,750 mm. Load capacity 25 t. Ramp operation via hydraulic power pack, power supply via NATO socket. Hydraulically liftable ramp on the neck, approx. 3,450 mm long, enabling loading of the upper deck across the vehicle width, passable up to 10 t. 5x PVC toolboxes 600/450/400 mm, Electric winch ALPHA 17.5, 24 Volt, 8.0 t pulling force, with 25 m x 12 mm steel cable, hook, cable guide window, and remote control (wireless and wired), Total of 64 heavy-duty lashing rings (8 t), Paintwork in RAL 2002 blood orange, Tyres 235/75R17.5 with tread depths: 10/10/11/11 mm, 6/7/7/7 mm, 9/7/8/9 mm, Leasing/financing available on request – immediate processing, even without down payment! Further details and requirements on request. This vehicle specification serves only for general identification. The details, images, and descriptions are provided without guarantee! Equipment must be verified separately where applicable. The seller assumes no liability for errors in typing or data transmission. Subject to prior sale and errors. Thank you for your interest! We look forward to your visit. Our SERVICE We are happy to accept your used vehicle as a trade-in, 30-day export plates incl. insurance, EUR-1 + all customs documents for export, TÜV / Safety test / Accident prevention regulation / Tacho check / OBU installation, Professional transfer to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location by arrangement, Retrofitting of additional attachments and other individual customer requests possible upon agreement.

Durumu: kullanılmış, renk: mavi, Üretim yılı: 2012, Meusburger MPS-3. Baujahr: 2012. BPW-Achsen, 10 Tonnen Achslast. Eigengewicht: 12.500 kg. Nutzlast: 32.500 kg. Zulässiges Gesamtgewicht: 45.000 kg. Sattellast: 15.000 kg. 7 m ausziehbar (verlängerbar). Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug. Zentralschmieranlage. Funkfernbedienung. ABS, EBS, ALB vorhanden. Dach in der Höhe verstellbar. Servolenkung, 3 gelenkte Achsen. Luftfederung. Twistlocks. Schiebedach. Innenmaße: Länge: 13.590 mm. Breite: 2.490 mm. Höhe innen: 2.900 mm. Höhe Ladefläche: 1.120 mm. Bereifung: 235/75R17,5, Profil 60%. Sehr gepflegter Auflieger! ID-Nr. 614. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Offerten sowie für alle von Heinhuis geschlossenen Verträge und die ihnen vorausgehenden Verhandlungen. Mit jeder Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 12.500 kg Zuladung: 32.500 kg zulässiges Gesamtgewicht: 45.000 kg Ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für weitere Informationen: Iedpfoynaf Uex Ag Njar WhatsApp:

Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.380 kg, azami yük ağırlığı: 29.620 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2007, Üretim yılı: 2007, Donanım: ABS, hidrolik arka platform, vinç, Meusburger, MPS-2 Vinç Palfinger 23002 Araç, çalışır durumdadır. Vinçte uzaktan kumanda ve ayrıca bir joystickli kumanda mevcut. Römork uzatılabilir ve 2 yönlendirilebilir aksa sahiptir. İlgileniyorsanız lütfen bize e-posta gönderin veya bizi arayın. Alemi Trucks Gottfried Vajan Straße 7 2442 Unterwaltersdorf Avusturya Iajdpfox Dy Igex Ag Nor T +43 (Almanca) M +43 (Almanca - İngilizce) E Tüm bilgiler taahhüt edilmeksizin verilmiştir!!!

Durumu: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear Iajdpfx Agjxnnk Do Nor - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durumu: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Iaodpfxjxgm S Ds Ag Nor Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Durumu: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) Iajdpfxjwviwko Ag Nsr - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durumu: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin Iodpfowu Agijx Ag Near - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durumu: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection Iasdpfxowu A Slj Ag Njr - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Durumu: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless Ijdpfexnym Djx Ag Nsar - Includes tire pressure monitoring Floor: - 35 mm larch wood floor with aluminum omega profiles Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Durumu: kullanılmış, azami yük ağırlığı: 29.690 kg, toplam ağırlık: 37.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2002, Üretim yılı: 2002, Donanım: ABS, Curtain-sided low-loader Meusburger MPG 3 Dimensions: Length 13.90 m, Width 2.55 m - 3.50 m (rear stanchions), Height 4 m Loading dimensions: Platform height 80 cm, inner height of recessed deck 3.20 m, recessed deck to gooseneck 67 cm, inner height gooseneck 2.53 m Iasdpfxjwrvubo Ag Ner Condition: Good for its age Tyres: 205/65R17.5, 50-70% tread remaining

Durumu: kullanılmış, azami yük ağırlığı: 26.040 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2010, Üretim yılı: 2010, Donanım: ABS, Semi-trailer Meusburger MPS-2, steered axles, Palfinger PK 26002 crane, radio control, 3 extensions, 4 m lifting capacity: 5,700 kg, 10 m lifting capacity: 2,250 kg Iederbf Uhjpfx Ag Noar Tractor unit: MAN TGS 26.440 6x2, Euro 5 EEV, retarder, dual-circuit hydraulics Condition: Minor rust spots, otherwise good; technically very good Tires: 80-90%

Durumu: kullanılmış, azami yük ağırlığı: 26.520 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2012, Üretim yılı: 2012, Donanım: ABS, Semi-trailer Meusburger MPS-2, steered axles, crane Palfinger PK 26002 with radio control, 4 extensions incl. rotator, 4m 5,500 kg, 12m 1,700 kg Tractor unit: MAN TGS 26.440 6X2 Euro 5 EEV, retarder, dual-circuit hydraulics Condition: very good, TÜV approved Ijdpjrcz Izjfx Ag Njar Tyres: 65-95%

Durumu: kullanılmış, makine/araç numarası: W09TS300870M49625, boş ağırlık: 12.400 kg, azami yük ağırlığı: 32.600 kg, toplam ağırlık: 450.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 14.340 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.780 mm, lastik boyutu: 235/75R17.5, renk: mavi, Üretim yılı: 2008, The Meusburger MTS 3 low-loader is the perfect solution for anyone seeking a reliable, robust, and versatile semi-trailer. Its high-quality workmanship and sturdy construction ensure long service life and maximum safety during every operation. Thanks to its generously sized deck, the MTS 3 offers ample space for a wide variety of loads, whether in construction or heavy haulage applications. The superior build quality and durable design make it a sound investment for any business, guaranteeing longevity and reliability. If you are interested, we are happy to provide further information or a consultation upon request. Performance Features / Basic Data: - Number of axles: 3 - Length: 14.34 m - Width: 2,550 mm - Height: 3,780 mm - Tare weight: 12,400 kg - Fifth wheel load: 18,000 kg - Gross permissible weight: 45,000 kg - Maximum axle load: 10,000 kg - Tyres: 235/75R17.5 Iedpsygxb Sjfx Ag Near Equipment: - Two-part hydraulic rear ramp - Axle spacing 1/2: 1.41 m - Axle spacing 2/3: 1.31 m - First axle: liftable - Axles 2 and 3: hydraulically forced steering - NATO socket

Durumu: kullanılmış, azami yük ağırlığı: 37.040 kg, toplam ağırlık: 47.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2006, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.750 mm, Meusburger MPS-4 Brandalı Kapaklı Dorse 4 dingilli Son dingil: yönlendirilebilir Kaldırılabilir dingil Genişletilebilir brandalı üst yapı Edscha – kayar tavan Mekanik kaldırılabilir tavan Kaldırma yüksekliği: yaklaşık 300 mm Taşıma kapasitesi: 37.040 kg Lastikler: 385/65R22,5 Disk frenler Havalı süspansiyon 1. dingil: kaldırılabilir dar 4. dingil: sürtünme ile yönlendirilmiş takip dingili Portal kapılar Önde sökülebilir genişletme ekipmanı, 2 adet uzatmalı tabela ile Arkada sökülebilir genişletme ekipmanı, 2 adet uzatmalı tabela ile 12 çift ağır yük sabitleme halkası (katlanabilir), her biri 5 ton çekme gücünde Yan dış şasiye sahip 12 çift mantar bağlantı noktası Her yöne 16x3 yan ceplik Her iki kapak tam olarak açılabilir ve kapak sabitleyicilere sahiptir. Her kapakta bir alüminyum çift menteşe ve içte iki adet tutacak cebi vardır. Iaedpfxeu T Ulqe Ag Njr Arka portal her iki tarafta 900 mm dışa gösterilebilir Üst arka portal kiriş yanlara dönebilir 3 m'de 33 ton noktasal yük için şasi güçlendirmesi Taşıyıcı dış şasi Yükleme alanı: 13.620 x 2.480 x 2.750 mm Dış ölçüler: 13.900 x 2.550 x 4.000 mm Değiştirilebilir king pin

Durumu: kullanılmış, renk: yeşil, Üretim yılı: 2017, Meusburger MTS-4 Isdpsyhfw Njfx Ag Njar Baujahr: 2017 8 t BPW Achsen Eigengewicht: 10.510 kg Nutzlast: 39.490 kg Zulässiges Gesamtgewicht: 50.000 kg Sattellast: 18.000 kg 4 m ausziehbar 1. Achse Liftachse 3. und 4. Achse Nachlauf-/Lenkachse Verzinkt Twistlocks Luftfederung EBS, ABS, ALB Abmessungen Ladefläche: Schwanenhals: L: 3.900 mm B: 2.540 mm H: 1.100 mm Sattelhöhe: 1.000 mm Ladefläche: L: 9.620 mm B: 2.540 mm H: 800 mm Bereifung: 205/65 R17,5, Profil ca. 80% Deutscher Auflieger! ID-Nr.: 623 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Offerten, alle von Heinhuis geschlossenen Verträge sowie für die diesen vorausgehenden Verhandlungen. Mit jeglicher Form der Rückmeldung erkennen Sie die Geltung dieser Allgemeinen Geschäftsbedingungen an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Alle Preise verstehen sich als netto Exportpreise. = Weitere Informationen = Baujahr: 2017 Leergewicht: 10.510 kg Zuladung: 39.490 kg Zulässiges Gesamtgewicht: 50.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für mehr Informationen: WhatsApp:

Durumu: kullanılmış, azami yük ağırlığı: 21.700 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2009, Donanım: ABS, Araç Kimlik No.: W09PJ300980M49179 Meusburger MPJ-3 - İlk tescil: 03.03.2009 DE HU 03.2026 - SP 09.2025 BPW Eco akslar, kampanalı frenler Ayarlanabilir römork çeki oku - halka 40 mm - bağlantı yüksekliği yaklaşık 350 mm TEKERLEK YATAKLI PLATFORM YAPISI - Alüminyum rampalar için askı raylı, RAMPASIZ!!! Platform uzunluğu: 2.850 + 5.000 mm Genişlik: 2.550 mm Alçak yatakta yükseklik: 870 mm Merkezi yağlama sistemi Alet kutusu Lastikler: 235/75 R 17,5 Isdpfx Ajw Nt T Uog Nsar Değişiklikler, ara satış ve yazım hataları açıkça saklıdır. Açıklama, aracın genel tanımlamasına hizmet eder ve alım hukuku anlamında bir garanti teşkil etmez. Satış sözleşmesindeki açıklama esas alınır. Teklifimiz genel olarak yeni TÜV muayenesi olmadan geçerlidir. Yeni TÜV muayenesi istenirse, partner atölyelerimizin teklifini memnuniyetle sunarız! Araç reklamla kaplanmış ve/veya yazılı olabilir. Genel teslimat ve ödeme koşullarımız geçerlidir.

Durumu: kullanılmış, azami yük ağırlığı: 17.120 kg, toplam ağırlık: 24.200 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2007, Donanım: ABS, Vehicle Identification No.: W09PT300770M49892 Curb weight: 7,080 kg German MOT (HU) due BPW Eco axles with drum brakes Axle 1: LIFT-AXLE Axle 3: FRICTION-STEERED Ijdow Hilpopfx Ag Noar Air suspension Platform dimensions: 7,900 x 2,540 mm – Loading height: 800 mm Total length as per registration: 9,195 – 11,195 mm 2 pairs of wheel recesses incl. extendable cover and loose wooden planks 2 pairs of wheel recesses incl. cover, each between 1st and 2nd axle and 2nd and 3rd axle Towing drawbar, hydraulically extendable – 50 mm eye Hydraulic rear extension Tyres: 205/65 R 17.5 Spare wheel carrier WITH spare wheel Modifications, prior sale, and errors excepted. This description is intended for general identification of the vehicle and does not constitute a warranty in the legal sense of the term. The definitive specification is that contained in the purchase contract. Our offer is generally without a new MOT (TÜV) certificate. If a new MOT is required, we would be pleased to provide an offer from our partner workshops. The vehicle may be furnished with advertising decals and/or lettering. Our standard terms and conditions of delivery and payment apply.

Durumu: kullanılmış, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps STZ-L gooseneck - robust steel welded construction - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Iasdpfsw Etd Tex Ag Nor Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)

Durumu: kullanılmış, Üretim yılı: 2013, Meusburger MTS-5+2+2. Baujahr: 2013. Gigant-Achsen 12 t. Eigengewicht: 19.860 kg. Zulässiges Gesamtgewicht: 84.000-108.000 kg. Sattellast: 18.000-24.000 kg. Hydraulisches Schwanenhals. Hydraulik kompatibel mit NATO. EBS ABS ALB. Werkzeugkasten am Schwanenhals. Zentralschmieranlage. 2 x 6 Meter ausziehbar. Insgesamt 12 Meter Auszug! 2 x 25 cm verbreiterbar. Hydraulische Federung. 1. Achse Liftachse. Powersteering – alle Achsen lenkbar. Abmessungen: Schwanenhals: L: 3.900 mm. B: 2.550 mm. H: 1.500 mm. Sattelhöhe: 1.250 mm. Ladefläche (5 Achsen): Iajdpfxex T Ahwo Ag Njr L: 9.500 mm. B: 2.550 mm. H: 900 mm. 2 x Meusburger MUA-2. Gigant-Achsen 12 t. Zulässiges Gesamtgewicht: 24.000 kg. Ladeflächenlänge: 3.200 mm (x2). Bereifung: 245/70R17,5 80 % Profil. ID-Nr.: 450. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle von Heinhuis geschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Mit jeglicher Rückmeldung akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind reine Netto-Exportpreise. = Weitere Informationen = Baujahr: 2013 Leergewicht: 19.860 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durumu: kullanılmış, boş ağırlık: 4.200 kg, azami yük ağırlığı: 13.800 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2009, bir sonraki muayene (TÜV): 05/2020, yükleme alanı uzunluğu: 7.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 385/65R22.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable trailer, air suspension, lifting and lowering function, ABS (anti-lock braking system), lashing rings, underride guard, extendable drawbar, side aluminum underrun protection, storage box, pendulum flaps Body: 2-axle flatbed trailer with forklift mounting, 2x 9t BPW axles, disc brakes, 25mm aluminum hollow profiles, equipment for truck-mounted forklift, extendable drawbar, lashing rings on the outer frame! Tyres approx. 80–90% remaining! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Iaedsupidhepfx Ag Nsr

Durumu: kullanılmış, boş ağırlık: 6.780 kg, azami yük ağırlığı: 28.720 kg, toplam ağırlık: 35.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/1999, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.910 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385 / 55 R 22,5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 3 aks, BPW aksları, havalı süspansiyon, 1. aks kaldırılabilir, kaldırma ve indirme, ABS (anti blokaj sistemi), Edscha tavan, brandalı yan perdeler, portal kapılar, sabitleme halkaları, takım sandığı. Üst yapı: EDSCHA / BRANDA. AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve hata yapma hakkı saklıdır! Isdpfxexmawaj Ag Noar

Durumu: kullanılmış, boş ağırlık: 12.450 kg, azami yük ağırlığı: 32.550 kg, toplam ağırlık: 45.000 kg, ilk tescil: 11/2008, yükleme alanı uzunluğu: 9.730 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, renk: turuncu, işletme ağırlığı: 12.450 kg, Very well-maintained vehicle from first owner: Meusburger MTS 3 - 45T Tri-axle low-loader trailer with drive-on ramp Heavy-duty transport Type: MTS 3 Gross vehicle weight: 45,000 kg Payload: 32,550 kg Length: 13,900 mm Iaodpfxjwb Sh As Ag Nsr Width: 2,500 mm Air suspension

Durumu: kullanılmış, boş ağırlık: 5.780 kg, azami yük ağırlığı: 20.920 kg, toplam ağırlık: 26.700 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2011, bir sonraki muayene (TÜV): 06/2024, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 3.200 mm, süspansiyon: hava, dingil mesafesi: 1.300 mm, Üretim yılı: 2011, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, * German semi-trailer * 1st owner * Special low-loader semi-trailer from premium manufacturer Meusburger * Model: MPG-2 * Body with sliding roof system * This allows for side loading * As well as loading from the top and rear * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * 21t payload * 3x 4.2t capacity Altec drive-on ramps * Ramp compartment * Sliding tarpaulin left and right with Edscha sliding roof * Platform dimensions: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Front platform loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW Eco Plus axles * Air suspension + lift/lowering function * 2 x extendable toolboxes * ABS/EBS * Gross vehicle weight: 26,700 kg * Unladen weight: 5,780 kg * Payload: 20,920 kg * Kingpin to front dimension: 1.45 m * Diagonal kingpin to front: 1.75 m * Kingpin to rear: 9.35 m If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, and without new UVV certification. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misunderstandings about their condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly encouraged. Iodpfjrkn R Tex Ag Near All information is provided without guarantee. We accept no liability for errors or incorrect information in this listing. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Durumu: kullanılmış, azami yük ağırlığı: 29.660 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2011, yükleme alanı uzunluğu: 16.900 mm, Üretim yılı: 2011, Donanım: ABS, Meusburger 2-axle bolster trailer, model MP-2, extendable from 11,835 mm to 16,935 mm, twin tires, fitted with 315/80 R22.5 tires, 1st and 2nd axles hydraulically forced-steered, axle distance 1.81 m, BPW axles, drum brakes, EBS, ABS. Iajdpfxjv U Iace Ag Nsr Permissible total weight: 38,000 kg / unladen weight: 8,340 kg / payload: 29,660 kg

Durumu: kullanılmış, boş ağırlık: 9.050 kg, azami yük ağırlığı: 29.450 kg, toplam ağırlık: 38.500 kg, ilk tescil: 10/2006, bir sonraki muayene (TÜV): 12/2023, süspansiyon: hava, lastik boyutu: 385/65R22.5, renk: gri, vites türü: diğer, ön lastik ölçüsü: 385/65R22.5, arka lastik boyutu: 385/65R22.5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Registration service, MOT (HU)/safety inspection (SP)/accident prevention inspection (UVV), transfer to port. Languages: German, Russian, English, Arabic. Iasdpoww Dquofx Ag Nor Base color: grey Equipment extras: ABS, air brakes, EBS, air suspension, suspension type: air, payload (kg): 29,450. Body type: hydraulic inclined loader, ready for operation, HSN/TSN: Video available, own 24V hydraulic system (NATO plug). Subject to errors and omissions.