Kullanılmış Müller-Mitteltal Ts2 Kompakt Tieflader 2 Achse Hydr. Rampen satın al (50.930)

Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2-in-1 = for roll-off containers and as a low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles ----Suspension: * Air suspension with lifting and lowering system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: Itedpfxol Tq Nmj Akqoi * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin electrical connector ----General attachments: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper buffer * Folding A-sign at rear ----Loading platform: * Main frame with raised outer rails for guiding roll-off containers * Steel floor plate with recesses for rollers in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1 * Weld bead as anti-slip surface in the inclined running track area * Mechanical drop-down rear supports ----Load securing: * 1 pair 10 t UVV lashing rings at the front bulkhead support * 3 pairs 10 t UVV lashing rings at the lateral outer frame * On each side, 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * But the drawbar, axles, and air tanks painted in a black tone ----Information: * New vehicle, never registered, with full manufacturer's warranty * Subject to errors and prior sale * Reference images ----Delivery time: * Available approx. from CW 43 / 2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): Itedpfx Ajy Ngzyekqoi * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Fren: * Wabco EBS-E (elektrikli fren sistemi) * Yaylı akümülatör silindirleri için acil serbest bırakma sistemi * Kampana frenler ----Akslar: * 4 x 11 tonluk Gigant akslar ----Süspansiyon: * Kaldırma ve alçaltma sistemi ve RtR vanası ile hava süspansiyonu ----Çeki Demiri: * 50 mm çeki borusu ve kademesiz yükseklik ayarı olan düz çeki demiri ----Elektrik / Aydınlatma: * EBS sinyali üzerinden kamyon ekranında görüntüleme imkanı olan lastik basıncı izleme sistemi -kamyon tarafında herhangi bir kurulum gerektirmez- * Aks yükü göstergesi için basınç sensörlü, bilgi aracı olarak kullanılan SmartBoard, her aks grubuna göre * 15 kutuplu elektrik fişi * LED arka stop lambaları * LED yanıp sönen lambalar (çıkarılabilir) arka kısımda ----Genel Ek Parçalar: * Ön ve arka kısımda uyarı levhası takımları * Yaklaşık 650 x 300 x 600 mm boyutlarında, galvanizli ve elektrostatik boyalı çelik sacdan yapılmış 2 x alet kutusu, sağ tarafta * Ön kısımda kapalı, plastik, tek çamurluk * Arka kısımda düz çelik çamurluk korumaları, her birinde sıçrama önleyici (püskürtme sisi azaltma) * Yan çarpma koruması ----Alçak Yatak Platformu: * 45° açılı köşeler ve 3 adet kapaklı, kilitlenebilir, gömülü saklama bölmeleri ile birlikte döner tabla platformunun ön kısmı 520 mm uzatılmıştır. * Döner tabla platformu üzerinde 50 mm, alçak yatak platformunda ise 60 mm kalınlığında iğne çam ağacı * Rampa alanında, 6.780 mm toplam alçak yatak uzunluğu dahil olmak üzere, ahşap zemin yerine 20 mm kalınlığında kauçuk kaplama * Sol ve sağ taraftaki rampa üzerinde, yaklaşık 860 mm uzunluğunda kauçuk kaplama * Her iki tarafta 4 adet bağlama noktası (ancak bağlama çubukları bulunmamaktadır), aynı zamanda 2 tonluk bağlama imkanı ----Şasi: * Yüksek mukavemetli ince taneli çelikten yapılmış şasi ----Yük Sabitleme (Lasi - Paket): Döner Tabla Platformu: * Döner tabla platformunun dış çerçevesinde 2 çift 13,4 tonluk bağlama noktası Alçak Yatak: * Her iki tarafta, dış çerçevede, aşağı indirilebilen ve her yönde yüke dayanabilen 4 çift 10 tonluk bağlama noktası * Arka kısımda, her iki tarafta, dönebilen 2 çift 13,4 tonluk bağlama noktası ----Rampalar: * Katlanabilir rampaların üzerinde kauçuk kaplama * Hidrolik olarak katlanabilen rampalar, hidrolik olarak açılabilen uç kısmı, yaklaşık 4.650 x 720 mm boyutlarında * Hidrolik yan rampa kaydırma ve yük tutma vanaları Iodpfx Aksylfvmoqsti ----Arka Destek: * Hidrolik arka destek ----Genişletme: * 3 metre toplam genişlik için 8 çift galvanizli katlanabilir destek ayağı (ancak arka rampada bulunmamaktadır) * Genişletme panoları, sol tarafta bir saklama bölmesinde saklanır ----Kazıcı Kolu Tutucu: * Arka aksın üzerinden, rampa sonuna kadar, yaklaşık L=2.100 mm x G=740 x D=190 mm boyutlarında kazıcı kolu tutucu * Kazıcı kolu tutucusunun her iki yanında 2 çift 6,4 tonluk bağlama noktası ----Hidrolik: * Römork üzerinde hidrolik debi ayırıcı (kamyondaki hidrolik pompa gücü 40 - maksimum 120 litre/dakika olduğunda) ----Yükleme Ölçüleri: * Arka yükleme alanı: yaklaşık 6.780 x 2.520 mm (860 mm'lik rampayı içerir) * Döner tabla üzerinde yükleme alanı: yaklaşık 2.990 x 2.520 mm ----Yükleme Yüksekliği: * Yük altında yaklaşık 890 mm, +/- 20 mm ----Boya: * Yan ve arka kısımda yansıtıcı şeritler, * Şasi, döner tabla, rampalar ve katlanabilir destek ayakları sıcak daldırma galvanizli * Akslar, çeki demiri, hava tankı ve döner tabla, siyah tonunda boyalı ----Bilgiler: * Üretici garantili yeni araç * Hatalar ve ön satış mahfuzdur ----

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lowering system and return-to-ride (RtR) valve ----Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted to trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front, mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder on the right side under the chassis ----Low Loader Platform: * Fifth wheel platform with 45° chamfered front corners and a front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable, on the side of the platform * Rear board – 150 mm high, slotted in place * Rear bevel on the fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks; lowbed area with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 x mechanical swing-out extensions to achieve a total width of 3 m (not on the rear bevel). Widening boards available, stored on the fifth wheel platform * Mechanically adjustable warning sign assemblies front and rear ----Load Securing (lashing package): * On the fifth wheel platform: 2 x 6.3 t lashing rings per side; 3 x 5 t lashing bars per side in the outer frame * On the lowbed platform sides: 2 x 13.4 t lashing rings per side; 4 x 10 t lashing rings, swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side; 1 lashing ring at the rear in the excavator stick support * 2 x container locks immediately after the goose-neck in the lowbed area ----Excavator Stick Support: * Continuous excavator stick support from end of last rigid axle over steering axle to rear crossmember, internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable side-to-side) * 4-way valve block for future customer upgrade of hydraulic ramp shifting * The outer plank of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach bevel ----Hydraulics: Itodpfjl Tnvgex Akqji * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 l up to 120 l/min) ----Payload Dimensions: * Fifth wheel loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unloaded loading height: approx. 910 mm (including 860 mm approach bevel) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from CW 38/2026

Durum: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2-in-1: For hook lift containers and as a low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lifting/lowering system and RTR valve ----Drawbar: * Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * LED rear lights, 12 / 24 V * 15-pin power plug ----General Attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm Ijdjl Tpc Aspfx Akqeti * Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Folding A-board at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll-off containers * Steel floor plate with roller recesses in the bogie area * Container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1 * Weld seam as non-slip coating in the ramp area * Mechanical falling supports at rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs of 10 t UVV lashing rings on the sides in the outer frame * 4 x 2 t cloverleaf-type lashing eyes per side * 4 x 8 t lashing brackets set into the outer frame ----Ramps: * 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, and rear supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black tone ----Information: * New vehicle, never registered, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 43 / 2026

Durum: yeni, azami yük ağırlığı: 30.440 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Fren Sistemi: * Wabco EBS-E (elektronik fren sistemi) Isdpfeylfvgex Akqjti * Yaylı akümülatör silindiri için acil serbest bırakma mekanizması * Kampana frenler ----Akslar: * 4 x 11 tonluk Gigant akslar ----Süspansiyon: * Kaldırma ve alçaltma sistemi ve RtR valfi ile hava süspansiyonu ----Çekme Çubuğu: * 50 mm çekme pimli ve kademesiz yükseklik ayarına sahip düz çekme çubuğu ----Elektrik / Aydınlatma: * EBS sinyali üzerinden kamyonun ekranında görüntüleme imkanı olan lastik basıncı izleme sistemi -kamyon tarafında herhangi bir kurulum gerektirmez- * Aks yükü göstergesi için basınç sensörleri içeren SmartBoard bilgi aracı (her aks grubu için) * 15 kutuplu elektrik fişi * LED arka stop lambaları * LED çok yönlü aydınlatma lambaları (çıkarılabilir), arka kısımda ----Genel Montaj Parçaları: * Ön ve arka kısımda uyarı tabelası takımları * Sağ tarafta, yaklaşık 650 x 300 x 600 mm boyutlarında, galvanizli ve toz boyalı çelik sacdan yapılmış 2 adet alet kutusu * Ön kısımda kapalı, plastik tek çamurluk * Arka kısımda düz çelik çamurluklar, her biri sıçratma koruması ile (püskürtme önleme) * Yan yana çarpma koruması ----Alçak Yatak Platformu: * Döner platformun ön kısmı 45°'lik köşeler ve 3 adet gömülü depolama bölmesiyle (kapak dahil) 520 mm uzatılmıştır ve kilitlenebilir * Döner platformun üzerindeki zemin, 50 mm kalınlığında iğne yapraklı ağaçtan, alçak yatak platformu ise 60 mm kalınlığında iğne yapraklı ağaçtan yapılmıştır. * Rampa alanında, ahşap zeminin yerine 20 mm kalınlığında kauçuk kaplama, toplam 6.780 mm uzunluğunda bir alçak yatak ve rampa eğimi dahil * Rampa eğiminin sol ve sağ tarafında yaklaşık 860 mm uzunluğunda kauçuk kaplama * Her iki yanda 4 adet tutma yuvası (ancak tutma çubukları mevcut değildir) ve aynı zamanda 2 tonluk sabitleme imkanı ----Şasi: * Yüksek mukavemetli, ince taneli çelikten yapılmış şasi ----Yük Sabitleme (Lasi - Paketi): Döner Platform: * Döner platformun dış çerçevesinde 2 çift 13,4 tonluk sabitleme halkası Alçak Yatak: * Her iki yanda, dış çerçevede, aşağı indirilebilen ve her yönden yüke dayanabilen 4 çift 10 tonluk sabitleme halkası * Arka kısımda her iki yanda, dönebilen 2 çift 13,4 tonluk sabitleme halkası ----Rampalar: * Katlanabilir rampalarda kauçuk kaplama * Hidrolik olarak katlanabilir rampalar, hidrolik olarak açılabilen bir uç bölümle yaklaşık 4.650 x 720 mm * Hidrolik yan rampa kaydırma ve yük tutma vanaları ----Arka Destek: * Hidrolik arka destek ----Genişletme: * 3 metre toplam genişlik için 8 çift galvanizli katlanabilir destek ayağı (ancak arka eğimde değildir) * Genişletme tahtaları, sol tarafta bir depolama bölmesinde saklanır. ----Kazıcı Kolu Rafı: * Arka aksın üzerinde, rampa eğiminin sonuna kadar, yaklaşık L=2.100 mm x B=740 x T=190 mm boyutlarında kazıcı kolu rafı * Kazıcı kolu rafında her iki yanda 2 çift 6,4 tonluk sabitleme halkası ----Hidrolik: * Treylerde hidrolik debi ayırıcı (kamyondaki hidrolik pompa kapasitesi 40 - maksimum 120 ltr./dakika'dan fazla ise) ----Yükleme Ölçüleri: * Arka yükleme alanı: yaklaşık 6.780 x 2.520 mm (860 mm rampa eğimi dahil) * Döner platform üzerindeki yükleme alanı: yaklaşık 2.990 x 2.520 mm ----Yükseklik: * Yüklenmiş halde yaklaşık 890 mm, +/- 20 mm ----Boya: * Yanlarda ve arkada yansıtıcı şerit * Şasi, döner platform, rampalar ve katlanabilir destek ayakları sıcak daldırma galvanizli * Akslar, çekme çubuğu, hava tankı ve döner platform koyu renk boyayla boyanmıştır. ----Bilgiler: * Üreticinin garanti kapsamındak

Durum: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Platform: * Mesh hooks on the sides and rear within the central locking mounts, plus 2 hooks on the front wall * Steel pallet three-way tipper body (continuous sidewalls – without intermediate stanchions – foldable, with tailgate spring assist) * Bolted rear stanchions * Combination steel double rear wing doors, asymmetrically split, 270° swing and lockable but not foldable, plus additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized locking bar and central locking. * Deactivation feature for automatic rear tailgate when tipping backward with an open wing door * 4 mm steel floor plate * Ramp rack at rear for drive-up ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes on each side, integrated in the outer frame ----Ramps: * 1 pair of aluminum drive-up ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment fitted underneath the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical drop legs: hot-dip galvanized * Sidewalls and tailgate: painted RAL 9010 pure white * Other RAL colors for sidewalls available at extra cost * Axles, springs, flange towing eye, air reservoirs, and landing leg: painted in black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, sold with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: Iedpfsl Thymox Akqjti * Available immediately from Egestorf at the A7

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing aggregate ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights 12/24 V * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Jost mechanical landing gear front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks at the central locking positions as well as 2 on the front wall * Steel pallet three-way tipper body with reinforced strong side walls (continuous upper side walls with internal pipe reinforcement - without center stanchions - foldable with side wall spring lifter) * Rear stanchions bolted * Combined steel swing doors at rear, asymmetrically split, two-leaf design, can be pivoted and locked at 270° (not foldable) and with additional pendulum frame for automatic rear wall opening during tipping process; locking by galvanized rotating bar lock at the back and central locking. Deactivation function for automatic rear wall feature when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * Each corner with 1 x 5 t lashing point * 4 x 3 t recessed lashing rings per side on the outer frame ----Chassis: Itjdex Hm Rcepfx Akqoi * Chassis made from fine-grain steel ----Ramps: * Rear mounting rail for access ramps * 1 pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment for ramps installed below the loading area in the chassis, accessible from the rear ----Tires: * Tire size: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Side walls painted in a desired RAL color (special or metallic paints excluded) – color can be changed up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Subject to prior sale and errors * Sample images ----Delivery Time: * Available immediately from calendar week 29/2026

Durum: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange-type Drawbar Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights, 12/24 V * Tire pressure monitoring system with display capability in the truck via EBS signal – no installation required on truck side ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on front right side of chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Mesh hooks installed at the central locking bearings and 2 units on the bulkhead * Steel pallet-drop, 3-way tipper superstructure with reinforced Strong sideboards (continuous upper side panels with internal reinforcement tube – without intermediate stanchions – foldable using board catch spring lifter) * Rear stanchions bolted * Combination steel double rear wing doors – asymmetrically split, swingable and lockable up to 270° (not foldable) – with additional pendulum frame for automatic tailgate opening during tipping; locking via galvanized rotary bolt at the rear and central locking system; deactivation function for the automatic rear wall function when tipping backwards with the wing door open * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point at each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Chassis: * Chassis constructed of fine-grain steel ----Ramps: * Rear fitting track for loading ramps * 1 pair of aluminium loading ramps approx. 3570 x 410 mm (load capacity 10 t per pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps embedded underneath the loading area at the rear of the chassis ----Tyres: * Tyres: 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir and landing leg painted in a black tone * Body side boards painted in a RAL colour of your choice (excluding special or metallic finishes), changeable up to approx. 6 weeks prior to completion ----Information: * Reinforced superstructure with load securing certificate * Subject to errors and prior sale Itodpox Hm Rijfx Akqoi * Sample images ----Delivery Time: * Ready for immediate delivery ex works from week 29/2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection Iedpfey Ngz Hjx Akqoti * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 3 Profil 30.0: Product Description (English, for professional trade platforms) ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with electro-pneumatic steering lock (trailing axle) ----Suspension: * Air suspension with lifting/lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support jacks at the front plus mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder, side right under the chassis ----Low Loader Platform: * Saddle platform with 45° chamfered front corners and integrated toolbox at the front made of galvanized sheet steel, B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white), foldable and removable, fitted on the sides of the saddle platform * 150 mm high removable rear drop-in board * Tapered rear section on the saddle platform towards the low-bed area, approx. 700 mm long * Saddle platform with 50 mm hardwood planking and low-bed platform with 60 mm hardwood planking * Tread plate above the axles ----Widenings: * 8x mechanical folding extensions to 3 meters total width, except for the tapered rear section (extension planks available and stowed on the saddle platform) * Mechanical adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform, 2x 6.3 t lashing rings per side, and 3x 5 t lashing stakes per side in the outer frame * On the low-bed platform, 2x 13.4 t lashing rings per side and 4x 10 t swiveling, retractable lashing rings set into the outer frame * On the sides, 2x 6.4 t lashing points per side, plus 1 lashing ring at the rear in the excavator arm rest * 2x container locks directly after the goose-neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm trough from end of the last rigid axle across the steering axle up to the end plate, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: Iedpjpk D I Aofx Akqeti * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates over 40 l/min up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth-wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support jacks, and air tanks painted in black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images

Durum: yeni, azami yük ağırlığı: 27.940 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t axles * Air suspension with raise/lower function and RtR valve * Start-assist for maneuvering via EBS to the first axle (no truck-side installation) with lifted lift axle +30 mm ride height * Smart-Board information tool mounted on trailer with pressure sensors for total axle load display * Last axle configured as self-steering axle with electro-pneumatic steering lock * Steering lock for the self-steering axle can be activated from the tractor for maneuvering via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop legs and rear swinging supports on chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 2 LED work lights on trailer sides (no truck-side installation) * 7-pin socket at rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with in-cab display option via EBS signal (without truck-side installation) * Mechanically adjustable warning sign holder packages front and rear * Straight steel fenders * Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 mm x H = 500 mm x L = 665 mm) with top folding lid and side doors in the chamfered corners * On each side of the fifth-wheel platform, 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable * Rear drop-in wall, 150 mm high * Rear slant on the fifth-wheel platform to the lowbed, approx. 700 mm long with checker plate and perforated strip for attaching aluminum loading ramps * Fifth-wheel and lowbed platforms with 50 mm clamped wooden planks * Tread plate above axles * Preparation for 3 receptacle shafts under the fifth-wheel platform for storing optional aluminum ramps * Swivel arm as a carrier for connecting lines from the truck to the trailer * Load securing package consisting of: perforated outer frame on the fifth-wheel platform, 45° bent with hole pattern for lashing equipment (2 t lashing force per point with min. 480 mm spacing), 2 x 6.3 t recessed lashing rings on each side, 1 x 16.5 t lashing ring per side on the slope from lowbed platform to fifth-wheel platform, 2 pairs of 16.5 t lashing rings in the lowbed platform (1 pair on the longitudinal beams after the step, 1 pair over the middle axle next to the longitudinal beam), 3 x 13.4 t lashing rings per side on the outer frame (1 at beginning of fifth-wheel frame step, 1 at start of ramp slope, 1 at end of ramp slope), 3 x 10 t lashing rings each side (2 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle), 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear) Itjdpfx Ajwh Hdxjkqsi * Extended excavator arm resting area from the end of the last rigid axle over the steering axle to the rear cross member, continuous with internal reinforcement profile approx. W = 770 mm x Depth rear = 270 mm / Depth front 170 mm; 2 x 6.4 t lashing rings per side in the excavator arm rest * 2 wheel recesses per side, 390 mm deep and 640 mm wide, for transporting wheel loaders with a wheelbase of 3,000 – 3,590 mm and a tire diameter of 1,760 mm – with sliding covers * 2nd sliding cover...

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Ijdpox Ipbgjfx Akqsti * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Durum: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not supplied), also usable as lashing points * Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope) * Widening planks stored in the middle of the loading area * Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic side-shifting of ramps * Load area over the turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Itjdpfxsx Ipb He Akqji * Unladen load height: approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from approx. calendar week 36/2026

Durum: yeni, azami yük ağırlığı: 9.070 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.010 mm, yükleme alanı yüksekliği: 325 mm, Üretim yılı: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronik fren sistemi) * RDÜ (lastik basıncı izleme) * Kampanalı frenler, 2 x 5,5 ton Gigant dingil * Parabol yaylar ve denge tertibatı * Yaklaşık 300 mm yükseklik ayarlı çekme kolu * BPW destek ayağı * Arka mekanik düşme destekleri * Ön sağda yan duvara monte plastik alet kutusu * Yan darbe koruması * LED aydınlatma * 50 mm iğne ağacı zemin * Ön duvar ve arka travers köşelerinde her biri 1 x 6,3 ton sabitleme halkası, yanlarda ise her biri 2 x 6,3 tonluk UVV sabitleme halkası dış çerçeveye entegre * Tek parça mekanik ızgara rampa, yay mekanizmalı, tek kişiyle kullanım için yaklaşık 2.350 x 870 mm (iç mesafe 20 mm, rampalar kaydırılamaz) * Ön duvar, yan duvarlar, çamurluklar ve çekme kolu sıcak daldırma galvanizli * Dingiller, yaylar, hava tankı, ön destek ayağı siyah renkte boyalı Isdpjwyhzpofx Akqoti * Tam üretici garantisine sahip yeni araç * Hatalar ve ara satış hakkı saklıdır * Yaklaşık 35. hafta / 2026'dan itibaren teslim edilebilir

Durum: yeni, azami yük ağırlığı: 13.490 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2025, TRA-Kombi 18.0: * 3-in-1 – suitable for hooklift, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System), displayable in truck via EBS signal (no truck-side installation required) * LED tail lights 12/24 V * 15-pin electrical connector ----General Attachments: * Tool box made of powder-coated steel plate * Spare wheel carrier in basket design on right-hand side * Enclosed side underrun protection * Quarter mudguards with splash guards made of plastic * Plastic rear impact protection buffers * Folding A-board at rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame to guide roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for hook lift container transport, container lengths from 5,500 – 7,000 mm * Pneumatic four-point clamping lock and mechanically inserted front stops in the guide rails * Transport of up to 2 skip containers with max. 10 m³ possible * Eight repositionable skip stops for side centering. The front four can be inserted and are pivotable. * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop-down supports ----Load Securing: * 3 pairs of 10-ton UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; each side with 4 cloverleaf lashing brackets * 1 pair of 13.4-ton UVV lashing rings facing towards the front * Four 8-ton lashing eyes per side integrated into the outer frame Isdpfx Aowb Rakekqjti ----Ramps: * Aluminium loading ramps (10.6 ton/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Painting: * Reflective contour tape, sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle, unregistered, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf

Durum: ikinci el, azami yük ağırlığı: 10.080 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2017, bir sonraki muayene (TÜV): 08/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, yükleme alanı hacmi: 6 m³, Üretim yılı: 2017, Donanım: ABS, Stok No: 5820 Müller-Mitteltal 3 Yönlü Çelik Tandem Damperli Römork / Alüminyum Rampalar / Galvanizli Şasi / Geniş Lastikler! ---- * Üretici: Müller-Mitteltal * Model: KA-TA-R 13,5 * İlk Tescil: 08/2017 * Azami Yüklü Ağırlık: 13.500 kg * Boş Ağırlık (Ruhsata Göre): 3.420 kg * Faydalı Yük: 10.080 kg * Dingil: 2 x Gigant / Kampanalı Frenler * Süspansiyon: Yaprak yaylı * Lastikler: 385/55 R 19.5, yaklaşık %50, çelik jantlı * Muayene (TÜV): 08/2026 * EBS (Elektronik Fren Sistemi) * Renk: Şasi galvanizli, damper gövdesi mavi * Damper Hacmi: Yaklaşık 6 m³ (5,00m uzunluk x 2,42m genişlik x 0,50m yükseklik) * Çekilebilir alüminyum rampalar Itjdpfx Ajzdm S Sokqji * 50 mm halka, yükseklik ayarlı çekme çatalı * Yerde 4 çift menteşeli bağlama halkalı damper gövdesi * Ön tarafta tam yük destek ayağı * Arka tarafta ek destek ayakları (katlanabilir) * Sağ ön köşede paslanmaz çelik alet kutusu * Çeyrek çamurluklar * Yük emniyeti sertifikası * İlk sahip Alman üretimi römork! Alman belgeleri ile! Tek elden! İlan Hakkında Olası Hatalara Dair Not: İlan büyük bir özenle hazırlanmış olmasına rağmen, metin ya da verilen bilgilerde tek tük hatalar olabilir. Hatalar, değişiklikler veya ara satışlardan dolayı hiçbir sorumluluk kabul edilmez. Tüm bilgiler taahhüt dışıdır. Bilgilerinizi kontrol etmek veya ek sorular için lütfen bizimle iletişime geçin.

Durum: yeni, azami yük ağırlığı: 8.770 kg, Üretim yılı: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Numerous Extras Equipment: - 2 spring-assisted lifts for 400mm high steel drop sides - Reinforced and certified superstructure in accordance with EN 12642 XL load securing certification - 10 UVV lashing rings in pre-existing lashing point grid in the outer frame - Additional wooden flooring in clamped design - Tyres 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm to a total length of 6,270 mm Isdpfx Ajxcxmfskqsti - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with a load capacity of 45 kg Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stakes/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or dispatch available upon request. We always have a selection of new units in stock as well as demo units. Contact us! We rent vehicles and machinery with or without drivers. A wide range of used machines and devices always available. Technical changes, errors, and prior sale reserved.

Durum: ikinci el, azami yük ağırlığı: 7.950 kg, toplam ağırlık: 11.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2010, bir sonraki muayene (TÜV): 02/2026, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 11.000 kg Boş ağırlık: 3.050 kg Yük kapasitesi: 7.950 kg Toplam uzunluk: 8.100 mm Itedpfjx E I Utjx Akqoi Yükleme uzunluğu: toplam yaklaşık 6.000 mm Genişlik: 2.550 mm / yükleme genişliği yaklaşık 2.470 mm Yükleme yüksekliği: 900 mm Diğer bilgiler - Yüksekliği ayarlanabilir çekiş kolu - Destek ayağı - 400 mm yan duvarlar, yaylı - E-tekerlek - BPW akslar - Yaylı rampa, ızgara tipi, yandan kaydırılabilir - Tırmanma çıtaları, arka destek - Büyük bağlama paketi

Durum: ikinci el, azami yük ağırlığı: 10.100 kg, toplam ağırlık: 13.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/2001, bir sonraki muayene (TÜV): 11/2025, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 13.500 kg Boş ağırlık: 3.400 kg Yük kapasitesi: 10.100 kg Toplam uzunluk: 8.100 mm Yükleme uzunluğu: 6.000 mm Genişlik: Toplam genişlik 2.550 mm / Kasaboyu genişlik 2.460 mm Yükleme yüksekliği: yaklaşık 1.000 mm Diğer bilgiler: - Lastik ebadı 285/70R19,5 - Yan paneller 400 mm, 1x bölmeli Iedjw Nu I Tepfx Akqoti

Durum: ikinci el, azami yük ağırlığı: 8.900 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2011, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 6.000 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Further information: - Ramps covered with grating - Spring-assisted ramps - Folding support legs - LED reversing lights - Tailgate springs - BPW axles Itsdpfezb Ua Tex Akqji - Side walls 400 mm - Load length 6,000 mm including rear extension approx. 1,100 mm

Durum: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Reference Number: 31943-O * NEW VEHICLE soon available in your preferred color. Müller-Mitteltal KA-TA-R 11.9 Tandem Low-loader Three-way Tipper Trailer with Ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic suspension, drum brakes * Gross weight: 11,900 kg, payload: 8,750 kg * Tire pressure monitoring with in-cab display via EBS signal * EBS instead of ABS, 24 Volt * EBS multi-voltage system for 24V and 12V vehicles (e.g., tractors) * Side marker lights with indicator control * LED lighting system for 12V and 24V * 2 additional LED reversing lights * Galvanized floor, dimensions: 5m x 2.42m, 0.5m high laser-welded side panels, swinging, foldable, and removable * Prepared for the later installation of side panel extensions * Lockable compartment under the tipping platform for loading ramp * Includes aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment beneath the tipping body * Floor galvanized, front panel galvanized * 4 UVV-certified lashing rings LC 5000daN at front and rear + 8 recessed, foldable lashing eyes LC 3000daN mounted flush in tipper floor (centered) * Continuously height-adjustable tow bar, hot-dip galvanized, 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on front panel * One plastic toolbox on the right-hand chassis frame Itodpfx Aozbfmkokqji * Access step in front of the front panel ---- * We are an official Müller-Mitteltal dealer ---- * Request your personal quote from us! * Example: 545 EUR net per month, 60 months, no down payment, no final installment. Financing offer from our partner FM LeasingPartner ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, appointments can be arranged. We speak German, English, Polish, French. Whatsapp Leasing, financing, and trade-ins possible----

Durum: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform | Trailer Available in 37th week of 2026. Inquiry no.: 31941. Delivery to your address possible. * We are happy to provide a tailored offer. * ----- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized 400 mm front wall * Digger bucket rest made of hardwood bolted to the front wall * Unladen deck height: 930 mm / Laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, adjustable to approx. 20 mm width, secured by holding rods and diagonal supports * Ramp lift with vertically mounted, adjustable springs for convenient single-operator use * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, with lashing holes; lashing point load capacity LC 2000 daN at minimum 480 mm spacing). Installation of drop lashing rings LC 3000 daN approx. 600 mm apart possible. Tight crossmember spacing, high-profile front & rear ends with rear loading slope, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN, retractable in the existing hole pattern on the outer frame, in addition * Additional lashing options via drilled holes (Ø 50 mm, LC 1200 daN) in front and rear beams * Toolbox mounted in front of the front wall Itodpfszbfmqjx Akqei * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-dip galvanized * Height-adjustable landing gear at the front, folding supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable. 50 mm towing eye available on request * 1 removable LED beacon at the rear ----- * Leasing, hire purchase, financing, trade-in available * Example: €525 per month, 60-month term, no down payment, no final installment ----- * Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 Outside of opening hours, appointments are possible by arrangement. We speak German, English, Polish, French. Leasing, financing, and trade-in available.

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, Üretim yılı: 2026, RA-T 18.0: Loadable from front and rear ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-tension units ----Axles: * 2 x 10 t BPW wide-track axles ----Suspension: * Air suspension (automatic lowering when uncoupling brakes) ----Electrics / Lighting: * Tire pressure monitoring system with display in truck via EBS signal (no installation required on truck side) * 15-pin power connector * LED lighting system with protective canopy * 2 LED reversing lights (activated via reverse gear) ----Drawbar: * Pneumatically lowerable drawbar, 1,800 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox 858 x 500 x 500 mm, right side * Storage box for container net made of galvanized perforated sheet, 1,000 x 500 x 500 mm, on the side * Enclosed plastic mudguards front & rear axle * Enclosed side underrun protection (RAL 9010 pure white) suitable as advertising space * Rear underrun protection * Rear plastic bumpers * Foldable A-sign * Hazardous goods placard with document pocket and reflective rear parking warning sign ----Container Area: * Additional front loading with rear runway lowering and removable stops * Roller depressions in the turntable area with mechanically adjustable stop angles (2 positions) front left and right on the runways * Roller track length approx. 6,830 mm * Pneumatic 4-point clamp locking * Suitable for transporting external roll containers according to DIN 30722 Part 1 - Dekra load securing certificate available - ----Loading Height: * Loaded approx. 1,130 mm ----Paintwork: * Chassis and locking parts hot-dip galvanized * Air reservoir, axles, turntable and drawbar painted in black ----Info: * --Permissible gross weight technically up to 20,000 kg-- * New vehicle without first registration with manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery Time: Ijdpjl Tn U Refx Akqjti * Available approx. from week 21/2026

Durum: ikinci el, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/1993, Üretim yılı: 1993, Donanım: ABS, - EBS Itedpfxext Rw Rs Akqoi Daha fazla bilgi için lütfen bizimle iletişime geçin.