Kullanılmış Hoet Trailers Yarı Alçak Yükleyici satın al (33.630)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka
- Alaka
Küçük ilan
Grevenbroich
2.599 km
Alçak yükleyici inşaat makineleri
MartzBuilder BAU-3 260/2 S 2,7T Heckklappe
Ara
Durum: yeni, boş ağırlık: 525 kg, azami yük ağırlığı: 2.125 kg, toplam ağırlık: 2.700 kg, yükleme alanı uzunluğu: 2.600 mm, yükleme alanı genişliği: 1.500 mm, yükleme alanı yüksekliği: 200 mm, Buy online at trailer-shop.de
At ANHÄNGERWIRTZ, many models available online
Fgjdpfxjy Evubo Abvsc
Convenient and 24/7 online purchasing
Pick up yourself or have it delivered 😊
The online pickup market for your new trailer offers top brand models!
Over 850 new trailers in stock
More than 130 used trailers always available
Non-binding example: Many versions immediately available
Martz Machine Transporter BUILDER Bau 3 260/2 S 260x150cm (S) 2700kg
Machine transport trailer Builder BAU-3 260/2 S 2.7T Loading area: 260 x 150 x 20 cm GVW: 2700 kg
Tandem axle, V-drawbar, galvanized steel side walls, phenolic resin anti-slip flooring, six lashing rings (250 daN each) on the loading floor, bucket storage, ramp with supports and air-permeable surface, automatic jockey wheel, 13-pin plug, online exclusive offer
Invoice with itemized VAT, warranty – trailer dealer for over 35 years
Sales and order acceptance by phone during our opening hours Monday–Friday
or 24/7 through our online shop
at trailer-shop.de
Copyright – Trademark protection 04.26 BUILDER2700260PRO+AK
Küçük ilan
Lääne-Harju vald
2.388 km
Alçak yükleyici
FaymonvilleSTBZ-4VA DOLLY D-2 / low platform L=8143-13173 ...
Ara
Durum: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2012, toplam uzunluk: 17.800 mm, toplam genişlik: 2.750 mm, süspansiyon: hava, Üretim yılı: 2012, Ek bilgi:
Marka: FAYMONVILLE
Model: STBZ-4VA + dolly D-2
Yapı: alçak şasi (düşük platform L=8143-13173 mm / G=2750 mm / Y=510 mm)
Yıl: 07.2012
Süspansiyon: hava süspansiyonu
Frenler: kampana
Boyutlar: U/G: 17800 mm / 2750 mm
Ağırlıklar: tam/boş: 80000 kg / 22250 kg (dolly hariç)
UZATILABİLİR / TÜM AKSLAR DİREKSİYONLU
Model yılı: 2012
Süspansiyon tipi: hava süspansiyonu
Frenler: kampana
Direksiyon: yönlendirilebilir
Fjdpfxoy Nlc Aj Abvogc
= Daha fazla bilgi =
Süspansiyon: hava süspansiyonu
Orta aks 1: yönlendirilebilir
Orta aks 2: yönlendirilebilir
Arka aks: yönlendirilebilir
Boş ağırlık: 22.250 kg
Taşıma kapasitesi: 57.750 kg
Azami yüklü ağırlık (GVW): 80.000 kg
Küçük ilan
Warstein
2.511 km
İnşaat makineleri için alçak yükleyici römorklar
Ifor WilliamsGH1054
Ara
Durum: yeni, boş ağırlık: 680 kg, azami yük ağırlığı: 2.820 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 3.045 mm, yükleme alanı genişliği: 1.630 mm, süspansiyon: parabolik yaprak (yay), lastik boyutu: 185/70R13C, römork freni: frenli römork, Üretim yılı: 2026, Ifor Williams iş makinesi römorku
- Tandem / 2 dingilli
- Daha düz bir yükleme açısı için kıvrımlı arka kısım
- Tam genişlikte rampa, 120 cm uzunluğunda
- İç kasa ölçüsü yaklaşık: UxG 304 x 163 cm
- Azami toplam ağırlık: 3500 kg
Fgjdpfx Absxcaiuevoc
- Boş ağırlık yaklaşık: 680 kg
- Yüksek noktasal yüklere dayanıklı 24 mm film kaplı kontrplak zemin
- 10 adet bağlama halkası (800kg)
- Ön tarafta kepçe desteği
- Üzerinde yürünebilir çelik çamurluklar
- Lastik: 185/70R13C
Fotoğraflar, standart aydınlatmalı modeli göstermektedir. Burada sunulan model ise 12/24V LED aydınlatma ile donatılmıştır
Fiyata dahil olan ekstralar:
- Sol arka tarafta araç sandığı
- Zeminde 4 ek bağlama halkası
- Tutuculu yedek lastik
Küçük ilan
Parma
2.155 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
bertojasemirimorchio culla allunagabile 2 assi
Ara
Durum: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 11.200 kg, azami yük ağırlığı: 25.600 kg, toplam ağırlık: 36.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2007, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 500 mm, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, renk: açık gri, römork freni: frenli römork, Üretim yılı: 2007, Donanım: ABS, Kullanılmış Bertoja uzatılabilir havuz tipi yarı römork, 2007 model, 2 adet hidrolik kontrollü döner dingil, merkezi kirişten 4,0 m ek uzatılabilir havuz, kapalı havuz uzunluğu 6,20 m, yerden yükseklik 50 cm, ayarlanabilir ve sökülebilir ön boyun, biçerdöverler için ideal yan platform genişletici, havalı süspansiyon, ABS, seviye ayar valfi, muayenesi 31.10.2026’ya kadar geçerli. BAYİ: INTERDRIVE SRL - PARMA.
Fgodpfjy A Ih Isx Abvoc
Küçük ilan
Lonato del Garda
2.155 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
CTCZA90SRT47 Tieflader 11.87m+hydr. Rampen
Ara
Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 8.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 13.000 kg, izin verilen dingil yükü (dingil 2): 13.000 kg, izin verilen aks yükü (aks 3): 13.000 kg, ilk tescil: 07/1983, yükleme alanı uzunluğu: 11.870 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: parabolik yaprak (yay), renk: beyaz, Üretim yılı: 1983, CTC ZA90SRT47 Dorse
Fsdpfx Absy Axufsvsgc
Alçak Şasi 11,87 m, hidrolik rampalar ve vinçli (4,10 m + 7,35 m)
3 dingil
Parabolik süspansiyon
Azami toplam ağırlık 47.000 kg – taşıma kapasitesi 39.000 kg
Özel taşımalar için, izin verilen toplam çekici+dorse ağırlığı 56.000 kg
İhracat net fiyatı 18.000,00 Euro
Tüm bilgiler taahhüt edilmeksizin / hata ve değişiklik hakkı saklıdır
Küçük ilan
Caivano
1.796 km
Alçak yataklı yarı römork inşaat makinesi taşımak için
DE ANGELIS3S425
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, Donanım: hidrolik arka platform, DE ANGELIS 3S425 semi-trailer, maximum mass 42,500 kg, 13 tyres, size 245/70R17.5''.
Vehicle equipped with:
- Hydraulic loading ramps, 4.00m x 0.85m, wood covered (fixed position)
- Electro-hydraulic control unit
- 1 stainless steel toolbox 600x600x300 mm (ditch side)
- Gigant axles
- Air suspension
- 3rd self-steering axle
- Lashing ring kit
- 200 mm high aluminium sideboards on the gooseneck
POSSIBILITY OF FINANCING OR CUSTOM LEASING AVAILABLE ON SITE.
FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT.
OTHER LOCATIONS IN OUR GROUP:
DOMENICO TRUCK SRL NAPLES HEADQUARTERS
DOMENICO ESPOSITO S.P.A. EBOLI (SA) – OFFICIAL DEALER
MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS
CONTACTS:
0823 1686306
335 6713062
BRANCH OPENING HOURS:
MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00
WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES:
Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer – Lamberet - Schmitz - Isuzu - Fixed flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway-T-Way-540-460 HP - Xway-X-Way-Three-way tipper - V8 - Scania - Frost Edition Curtain Sider - Box - Boarding platform - Refrigerated Cell - Insulated with fridge - Van
Domenico Truck srl declines any responsibility for technical data, optional equipment, and characteristics that may differ from those stated in the description. We kindly ask you to check the specifications of the specific vehicle.
Fgedoydcyyjpfx Abvec
Küçük ilan
Caivano
1.796 km
Inşaat makineleri taşımak için alçak yarı römork
BERTOJABERTOJA
Ara
Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, BERTOJA SEMI-TRAILER 13.80m
BRAND NEW, READY FOR REGISTRATION
Double galvanized hydraulic ramp
Raised edge on gooseneck
Winch pre-equipment
Self-steering axle
CONTACTS:
0823 1686306
335 6713062
OFFICE OPENING HOURS:
MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM
WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES:
Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder-770s – Limited Edition – 660 S Semitrailer – Refrigerated Tanker Semi-Trailer – Lamberet – Schmitz – Isuzu – Fixed Flatbed – Crane – Tipper – 4 Axles – Rear Four Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Trilateral – V8 – Scania – Frost Edition Curtain Side – Box – Tail-lift Box – Refrigerated Cell – Insulated with Fridge – Van
Fgsdpfxjxpi A Re Abvoc
Domenico Truck srl declines all responsibility for any discrepancies regarding equipment, optional extras, and vehicle features, which may in some cases differ from those stated in the description. We invite you to verify the specifications of each specific vehicle.
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200 P
Ara
Durum: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-loader Trailer
Welded steel construction
Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame
Foldable rear support
Wheel chocks with holders
Aluminium side underrun protection
Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle
with anti-spray mudflaps behind each axle
1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included)
Extendable deck widenings to 3,000 mm (not in rear chamfer)
(the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm
Lashing Points Low-loader
3 pairs of 10 t lashing points integrated in the floor at the front
6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame
1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm
1 x rear chamfer
5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets)
Trailer Drawbar Assembly - Turntable trailer
Drawbar with tested 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axles/chassis laser measured to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings
Wheels and Tyres
235 / 75 R 17.5
As per manufacturer's choice
Steel rims in twin arrangement, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS plug at the front, with connecting cable
Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber lights, yellow LED side markers
2 white/red lane marker lights at the rear
2 white position lights at the front
1 revolving beacon with holder, switchable via parking light (beacon removable)
2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm
2 x 7-pin interchange-proof plugs at the front, with connecting cable
Deck
Front section with steel floor,
then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering
Rear chamfer with 70 mm softwood floor
Low-loading area incl. rear chamfer 8,200 mm
Access Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment)
Wood covering
Assisted by spring lifters
Operating Notes
Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility.
The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions.
Registration / Plates
Country of registration: Germany
Test approval according to EC 2007/46
24/7-Service Hotline
Prepared for two-line number plate holder
Contour marking with reflective strips according to ECE R 048, white on sides and red at rear
Warning sign according to ECE - 70
Paintwork
Frame: DB Novagrau
Ramps: hot-dip galvanised
Fgjdji Ri N Hjpfx Abvec
Note: Archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 mit Radmulden
Ara
Durum: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis low-loader trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Aluminum side underrun protection
Full-width rear mudflap
Quarter-shell mudguards in front of the 1st axle
1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess.
2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess.
Extensions telescopic to 3,000 mm (not at rear taper)
(The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm)
Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper)
(The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Wooden planks 70 mm for widening to 3000 mm
Lashing eyes low-loader
1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t
4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps)
7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t
1 x front in the step
6 x in the deep bed
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm
Drawgear - Turntable trailer drawbar
Drawbar with tested 40 mm drawbar eye
Axles + Suspension
SAF drum braked axles
Axles/chassis laser-aligned to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mountings
Wheels and tyres
235/75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front
2 white/red lane marker lights at rear
2 x 7-pin foolproof plugs at front with connecting cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Front step with steel/chequer plate covering
Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering
Fjdpfxsi Ri Rvj Abvjgc
Rear slope with 70 mm softwood floor
Low-loader area including rear slope 6500 mm
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
with wooden covering
with spring-assist lifting
Operating notes
For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P
Ara
Durum: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Fodpfx Aboi Riy Eovogc
Full-width rear spray flaps
Extendable widening sections up to 3,000 mm (not including rear taper)
(The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Central storage compartment for timber boards on the loading platform
70 mm timber boards for widening up to 3,000 mm
Lashing eyes for low loader
3 pairs of 10 t lashing points integrated into the front floor
6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame
1x in the neck area
The remainder are distributed in between, distance not greater than 1,200 mm
1x rear taper
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Towing Device Trailer Turntable
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation)
Brake System
2-line compressed air brake system
Colored line routing for easy servicing.
Spring-loaded parking brake included.
2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit
ABS and ALB with ABS connector at the front, with connecting cable
Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS!
Wheels and Tires
235 / 75 R 17.5
Manufacturer's choice
Twin steel rims, factory silver
Electrics
24 Volt, multi-chamber tail lights, side yellow LED lighting
2 white position lights at the front
2 white/red lane marker lights at the rear
2x 7-pin non-interchangeable connectors at the front, with connecting cable
1 LED beacon with holder, operated via parking light (removable lamp)
2 pairs of warning signs, double LED illuminated and extendable to 3,000mm
Floor
Front area steel floor,
then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area
Rear taper with 70 mm softwood floor
Low-bed area incl. rear taper: 8,200 mm
Loading Ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Timber deck included
With spring-assisted lifting
Operating Notes
At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted!
The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution)
Country of Registration / Plates
Country of registration: Germany
With Dekra inspection and certificate (in accordance with §13 EC-FGV)
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips as per ECE R 048, side white and rear red
Paint finish
Frame DB 7350 Nova grey
10-year corrosion warranty
Drawbar galvanized or black,
manufacturer’s choice
Steel loading ramps hot-dip galvanized
Please note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400 RR
Ara
Durum: yeni, makine/araç numarası: ee3256d63dd23b3ad1bdf9ab0, boş ağırlık: 10.280 kg, azami yük ağırlığı: 13.720 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Rear spray guards across the entire width
Quarter-circle mudguard in front of the 1st axle
Excavator arm recess starting above rear axles and running to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t in the excavator arm recess, located on the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear chamfer
1 storage box recessed in the kink of the floor with lid, W=720 mm / L=520 mm / D=170 mm
1st pair of wheel wells recessed after the frame drop in the low-bed running gear area, with ramped entry, length at the bottom approx. 1,600 mm, approx. 400 mm deep. Note! The main frame is 400 mm higher in this area than the wheel well. 2nd pair of wheel wells between the axles in the low-bed section, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The main frame is 300 mm higher in this area than the wheel well.
Removable wheel well covers, insertable from main frame, with timber inserts.
Distance from outside main frame beam to beam in wheel well area approx. 1,280 mm
Extendable widenings to 3,000 mm, folding at the wheel well extensions (widening not at the rear chamfer and not at the bottom of the wheel wells) (Track width of machinery/vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for timber planks, centrally on or under the loading surface as per technical feasibility
Timber planks 70 mm for widening to 3,000 mm
Lashing points for low-bed trailer
1 pair of ring lashing eyes recessed at the front on the frame drop, each rated 5 t
8 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated 10 t
2 x front on frame drop
Fodei Ri I Njpfx Abvsgc
6 x in the low-bed first lashing eye 250 mm from front and last max. 250 mm from rear, spacing between lashing eyes no greater than 1,100 mm
5 pairs of ring lashing eyes recessed into the outer frame, each rated 5 t (convertible to stake pockets)
Drawbar and turntable for trailer
Drawbar with certified 50 mm towing eye, towing eye inclined at 8°
Axles + Suspension
SAF drum brake axles
Axles/chassis laser alignment to reduce tyre wear and fuel consumption
Air suspension with independently controllable raise & lower valves at front and rear
Wheels and tyres
235/75 R 17.5
Manufacturer’s choice
Steel rims, twin-wheel arrangement, factory silver
Braking system
2-line compressed air braking system
Spring-actuated parking brake
Trailer Info Center, displays vehicle data such as axle load (not calibrated) and odometer
Axle load detection via EBS-CAN bus signal, display in cab (truck must be pre-equipped accordingly, no truck installation, not a calibrated scale)
Vehicle stability system
Duomatic coupling at front, with connecting line to tractor vehicle
EBS (Electronic Braking System) with EBS connector at front, with connection cable
Note: The trailer must only be towed by vehicles that guarantee the effectiveness of the ABS!
Electrics
24 Volt, multi-chamber LED taillights with resistor, lateral amber LED lights, licence plate LED illumination (Note: with certain towing vehicles false diagnostics may occur even though functionality is guaranteed)
2 front position lights in LED
2 rear lane marking lights in white/red
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200
Ara
Durum: yeni, makine/araç numarası: 2b58968e34fac93b429a256e9, boş ağırlık: 5 kg, azami yük ağırlığı: 12 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis – Low-bed Trailer
- Steel welded construction
- Turntable with heavy-duty ball race, storage box recessed in turntable front section
- Foldable rear support
- Wheel chocks with holders
- Aluminum side underrun protection
- Full-width rear spray flap
- Quarter shell mudguards in front of 1st axle
- Spare wheel carrier for 1 spare wheel, with attachment kit
- Spare wheel, same brand and specification as base tires, steel rim
- Plastic toolbox with insert shelf, dimensions: width=620 / height=360 / depth=440 mm, lockable with a padlock (lock not included)
Tie-down Points Low-bed
- 3 pairs of lashing points, each rated for 10 tons, integrated into the floor at the front
- 6 pairs of lashing studs, inserted in the upper and side outer frame, each for 10 tons; 1 in the gooseneck area, remaining distributed with max spacing of 1200 mm; 1 at rear incline
- 5 pairs of ring-type lashing eyes recessed into the outer frame, each rated for 5 tons (convertible to stake pockets)
Trailer Drawbar/Turntable
- Drawbar with tested 40 mm towing eye
Axles & Suspension
- SAF drum brake axles
- Axles/chassis laser aligned to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings
Wheels and Tires
- 235/75 R17.5
- Tire brand at manufacturer’s discretion
- Steel twin-mounted rims, factory silver
Braking System
- 2-line air brake system
- Spring-loaded parking brake
- 2 reverse-polarity-proof coupling heads at the front, with connecting lines to the towing vehicle
- ABS and ALB, with ABS plug at the front, connection cable, voltage converter for 12/24 volt operation
Note: A 7-pin 12V socket on the tractor/hauler is required (required for electrics with voltage converter!)
Warning: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS!
Electrics
- 24 volts, multi-chamber lighting, yellow LED side markers
- 2 white/red track lights at the rear
- 2 white position lights at the front
- Additional LED work light at the rear, operated via reverse gear
- 2 x 7-pin reverse-polarity-proof plugs at the front, with connecting cable
- 1 x 7-pin agricultural plug
- Voltage converter 12/24 volt (for electrics only, not for ABS/EBS)
Floor
- Steel floor in the front area, followed by 70 mm softwood floor
- In the wheel arch area: steel / chequer plate covering
- Rear incline with 70 mm softwood floor
- Low-bed platform including rear incline: 8,200 mm
Access Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wooden overlay
- Spring-lift assisted
Operating Instructions
- A special permit is required for 10,000 kg axle load. The permit must be applied for separately in each federal state; approval for 20-ton GVW is at the discretion of the authorities – customer’s responsibility.
Country of Registration / License Plates
- Registration country: Germany
- With Dekra inspection and expert's report (according to §13 EC-FGV)
- 24/7 service hotline
- Prepared for two-line license plate holder
- Reflective contour marking as per ECE R 048, white on the sides and red at the rear
Paintwork
- Frame: DB 7350 Novagrau
- 10-year anti-perforation warranty
Fsdei Ri Nxjpfx Abvegc
- Drawbar: galvanized or painted black, depending on manufacturer's choice
- Ramps: hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S 400 Parab/Hydr.
Ara
Durum: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Lowbed Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear splash guard
Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles
Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included)
1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm
Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm)
Timber beams 70 mm for extension to 3,000 mm
Storage compartment for timber beams under loading area
Lashing rings lowbed (40 lashing points)
1 pair of lashing rings on gooseneck, each 5t
9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t
2 x on gooseneck in front
7 x in the lowbed area
6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps)
3 additional pairs of folding lashing rings, each 10 t
1 x inside next to main frame at start of lowbed
1 x on gooseneck (protrudes)
1 x recessed in the floor behind the last axle
Trailer drawbar assembly
Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation)
Wheels and Tires
235 / 75 R 17.5
as selected by manufacturer
Fjdpfoi Ri Daex Abvogc
Steel twin wheels, factory silver
Brake system
2-line air brake system
Spring-loaded parking brake
2 anti-mismatch coupling heads at front, with connection lines to truck
ABS and ALB, with ABS plug at front, with connection cable
Electrics
24 volt, multi-chamber lights, side yellow LED lighting
2 white position lights at front
2 white/red marker lights at rear
2 x 7-pin anti-mismatch plugs at front, with connection cable
1 LED rotating beacon with holder, controlled via parking light (beacon detachable)
2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm
Floor
Gooseneck at front with steel/aluminium chequer plate covering
followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells
Rear incline with 70 mm softwood floor
Access ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
with timber surfacing
Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left
Hydraulic connection with SVK plug NW 10/3, including connecting hose
Approval country / Plates
Approval country: Germany
24/7 service hotline
Prepared for two-line number plate holder
Contour marking with reflective tape as per ECE R 048, side white and rear red
Warning sign according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty
Drawbar galvanized or black, as per manufacturer’s choice
Access ramps hot-dip galvanized
Note: Images are for illustrative purposes (archive images)!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300 P mit Radmulde
Ara
Durum: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note!
The frame is 400 mm higher than the wheel recess in the main beam area.
If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer.
Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section
Rear support foldable
2 wheel chocks with holders
Side underrun protection in aluminium
Rear mudflaps across the full width
Extendable widening to 3,000 mm (not in rear bevel area)
(The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for wooden planks in the centre of the loading area
70 mm wooden planks for widening to 3,000 mm
Lashing points for low loader
3 pairs of lashing points integrated into the front floor, each 10 t Incl.
6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t
1 x in the gooseneck area
The rest distributed in between, distance not greater than 1200 mm
1 x rear bevel
5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included)
Drawbar for turntable trailer
Drawbar with certified 40 mm towing eye
Axles + Suspension
SAF drum brake axles
Axle/undercarriage laser measured for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber mounting
Brake System
2-line compressed air brake system
Colour-coded piping for easy servicing
Spring-actuated parking brake
2 non-interchangeable coupling heads at the front with connecting lines to the truck
ABS and ALB, with ABS socket at the front, including connection cable
Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS!
Wheels and Tyres
235 / 75 R 17.5
manufacturer's choice
Steel rims in twin arrangement, factory silver
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white front position lights
2 white/red rear marker lights
Fgsdpfx Abji Ri Ryjvsc
2 x 7-pin non-interchangeable plugs at the front, with connection cable
1 LED beacon with holder, switched via parking light (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Steel floor in the front section, incl.
followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering
Rear bevel with 70 mm softwood floor
Low loader platform incl. rear bevel 8,200 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
covered with wood
with spring lift assistance
Operating Instructions
With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!!
The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution)
Country of Approval / Plates
Country of approval: Germany Incl.
with Dekra approval and certificate (acco
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTL 300 Agrar
Ara
Durum: yeni, makine/araç numarası: b50cac2c60a813b0968994fa0, boş ağırlık: 5.700 kg, azami yük ağırlığı: 18.300 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
- Steel welded construction
- Turntable with robust ball-bearing slewing ring
- Foldable rear support
- 2 wheel chocks with holders
Fgsdpfx Asi Ri Agobvec
- Full-width rear mudguards
- Prepared for extension to 3,000 mm (holes in the outer frame, not in the rear bevel)
Lashing Points Low-bed
- 1 pair of lashing cutouts recessed at the front in the longitudinal beam at the gooseneck, each rated for 10t
- 7 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated for 10t
- 1x at the front on the gooseneck
- 5x in the low-bed area
- 1x in the rear bevel
- 12 pairs of lashing holes in the outer frame, each rated for 5t (for tensioning strap hooks)
- 5x gooseneck, 6x low-bed, 1x rear bevel
Drawbar Hitch Turntable Trailer
- Drawbar with tested 40 mm towing eye
Axles & Suspension
- Drum brake axles, manufacturer’s choice
- Laser-aligned axles/chassis to reduce tire wear and fuel consumption
- Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balance)
Wheels and Tires
- 235 / 75 R 17.5 Fulda
- Steel twin wheels, factory silver
Brake System
- 2-line compressed air brake system
- Spring-loaded parking brake
- 2 confusion-proof coupling heads at the front, connection lines to tractor vehicle
- Connection lines approx. 60 cm extended
- Without ABS, but with mechanical ALB, max. 60 km/h permissible
Electrics
- 12 volts, multi-chamber lights, no side yellow LED lights, side reflectors
- 2 white position lights front
- 2 white/red lane marker lights rear
- 1x 7-pole 12-volt plug at the front, with connection cable, extended by approx. 60 cm
- 1 LED beacon with bracket, switched via parking light (removable beacon)
- 2 pairs of illuminated, extendable warning boards up to 3,000 mm
Floor
- Gooseneck front with steel / checker plate covering
- Toolbox recessed into drive-over slope at gooseneck
- Then 70 mm softwood floor, with steel / checker plate covering in wheel arch area
- Rear bevel with 70 mm softwood floor
- Low-bed platform including rear bevel: 5,900 mm
Loading Ramps
- Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
- Wood covered
- Supported by spring assist
Operating Instructions
- For 10,000 kg axle load, a special permit is required; only indivisible loads permitted!
- The specified total weight is technically possible; depending on the load, the permissible axle/support/saddle loads may not be achieved (poor tracking and maneuverability possible due to improper load distribution)
Country of Registration/Plates
- Country of registration: Germany
- With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (for Switzerland, max. 40 km/h possible)
- Prepared for two-line license plate holder
- No ECE R 048 compliant contour marking / reflective strips
Paintwork
- Frame: DB 7350 Novagrau
- 10-year warranty against rust-through
- Drawbar galvanized or black, manufacturer’s choice
- Loading ramps hot-dip galvanized
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS S Parab/Feder
Ara
Durum: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction
Turntable with heavy-duty slewing ring
Foldable rear supports
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear mudflap
Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles
Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline
1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included)
1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm
Extendable widenings to 3,000 mm
70 mm wooden planks for widening to 3,000 mm
Storage compartment for wooden planks under the loading area
Low-bed trailer lashing points (40 lashing options)
1 pair of 5 t lashing eyes on gooseneck
9 pairs of 10 t lashing pins, recessed into the top and side of the external frame
2 x on the front gooseneck
7 x in the low-bed area
6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps)
3 additional pairs of foldable lashing eyes, each 10 t
1 x inside next to the main frame at the start of the low-bed
1 x on the gooseneck (overhanging)
1 x recessed in the floor behind the last axle
Trailer drawbar
Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation)
Wheels and tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin wheel configuration, factory silver
Brake system
Fgodpei Ri A Ssfx Abvjc
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle
ABS and ALB, with ABS socket at the front, with connecting cable
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white position lights at the front
2 white/red tracking lights at the rear
2 x 7-pin non-interchangeable plugs at the front, with connecting cable
1 LED beacon with holder, operated via parking lights (removable beacon)
2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm
Floor
Front gooseneck section with steel/chequer plate covering
Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area
Rear incline with 70 mm softwood flooring
Loading ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Wood-covered
With spring lift assistance
Registration/country plates
Country of registration: Germany
24/7-Service Hotline
Prepared for two-line license plate holder
Conspicuity markings with reflective strips according to ECE R 048, side white and rear red
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized incl. passivation—15-year corrosion warranty
Towing bar galvanized or black, at manufacturer’s option
Ramps hot-dip galvanized
Note: These are archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Hydr.
Ara
Durum: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis for Low-Loader Trailer
Steel welded construction
Turntable bogie with heavy-duty slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection, aluminium
Full-width rear spray flap
Half-shell fenders on 1st axle with anti-spray flaps
Additional anti-spray flaps behind 2nd and 3rd axle
1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock
Extendable width up to 3,000 mm
Central storage compartment for wooden planks in the loading area
70 mm wooden planks for extension to 3,000 mm
Lashing rings for low-loader (40 securing points)
1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t
4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps)
7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t
1 x at the front on the cranked zone
6 x in the low-bed
First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes
2 additional pairs of folding lashing rings, each rated for 10 t
1 x on the cranked zone (protruding)
1 x recessed in the floor behind the last axle
Drawbar / Turntable coupling
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice
Steel rims, twin arrangement, factory silver
Brake System
2-line compressed air brake system
Spring-loaded parking brake
2 anti-swap coupling heads at the front, with connecting lines to the tractor unit
ABS and ALB, with ABS socket at the front, including connecting cable
Make: Wabco, Knorr or Haldex
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
Fgedpji Ri Dljfx Abvjc
2 white position lights at the front
2 white/red lane marker lights at the rear
2 x 7-pin anti-swap plugs at the front, with connecting cable
1 LED beacon with bracket, switched via parking light (removable lamp)
2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm
Floor
Front cranked section with steel / tread plate surface
Storage box recessed in the ramp transition to cranked section
Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface
Rear bevel with 70 mm softwood floor
Low-loader area incl. rear bevel: 6,500 mm
Loading Ramps
Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable
Wooden inlay
Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR
Hydraulic connection with SVK coupling NW 10/3, including connecting hose
Registration / Plates
Country of registration: Germany
24/7 Service Hotline
Prepared for two-line plate holder
Contour marking with reflective tape according to ECE R 048, white on sides and red at rear
Warning panel according to ECE - 70
Paintwork
Frame hot-dip galvanized including passivation
15-year warranty against rust-through
Drawbar galvanized or black, manufacturer’s choice
Ramps hot-dip galvanized
Note! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS S 300 Parab/Feder
Ara
Durum: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Lowbed trailer chassis
Steel welded construction
Turntable with robust ball bearing ring
Foldable rear support
2 wheel chocks with holders
Aluminum side underrun protection
Full-width rear splash guards
Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3
1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included)
Extendable widenings up to 3,000 mm
Storage compartment for timber planks in the center of the loading area
70 mm timber planks for extension to 3,000 mm
Lashing eyes for low loader (40 lashing points)
1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t
4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps)
7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t
Fgodsi Ri Ddepfx Abvec
1 front cranked area
6 in the lowbed deck
First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
2 pairs of additional folding lashing eyes, each 10 t
1 located in the cranked area (protruding)
1 recessed in the floor behind the last axle
Towing equipment for turntable trailer
Drawbar with certified 40 mm towing eye
Axles & Suspension
Drum brake axles (manufacturer’s choice)
Axle/chassis laser alignment to reduce tire wear and fuel consumption
Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation)
Wheels and tires
235 / 75 R 17.5
(manufacturer’s choice)
Steel rims, dual configuration, factory silver
Braking system
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads front, with connecting lines to the tractor unit,
ABS and ALB, with ABS plug front, with connection cable
Brand: Wabco or Knorr
Electric system
24 volt, multi-chamber lights, yellow LED side marker lights
2 white front position lights
2 white/red lane marker lights rear
2 x 7-pin non-interchangeable plugs at front, with connecting cable
1 LED rotating beacon light with bracket, switched via parking light (removable lamp)
2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm
Floor
Front crank area with steel / chequer plate covering
Toolbox recessed in the ramp bevel to the crank
Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area
Rear ramp bevel with 70 mm softwood floor
Lowbed loading area incl. rear ramp bevel: 6,500 mm
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber-covered
With spring assist
Country of approval / Number plates
Country of registration: Germany
24/7 service hotline
Prepared for two-line license plate holder
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Warning board according to ECE-70
Painting
Frame hot-dip galvanized incl. passivation
15-year warranty against corrosion
Drawbar galvanized or black, as per manufacturer’s choice
Loading ramps hot-dip galvanized
Attention! These are archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400 P
Ara
Durum: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low Loader Trailer
Steel welded construction
Turntable with heavy-duty slewing ring, integrated storage box included.
Turntable drawbar
Foldable rear support
2 wheel chocks with holders
Aluminium side underrun protection
Full-width rear mudflap
Extendable widening to 3,000 mm (not at rear chamfer)
(Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm)
Central wooden plank storage compartment
70 mm wooden planks for widening to 3,000 mm
Low loader lashing rings
3 pairs of lashing points rated 10 tonnes each, integrated at the front
6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes
1 x in the neck area
The remaining pairs are spaced at intervals no greater than 1,200 mm
1 x at the rear chamfer
5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included)
Turntable trailer drawbar system
Drawbar with certified 40 mm towing eye
Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required.
Axles + Suspension
SAF drum brake axles
Laser-measured axles/chassis for reduced tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel rims, twin configuration, factory silver
Braking System
2-line pneumatic brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit
ABS and ALB, with ABS connector at front and connection cable
Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation!
Electrics
24 Volt, multi-chamber lights, side-mounted yellow LED lighting
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin non-interchangeable connectors at front, with connecting cable
1 LED beacon with bracket, operated via parking light (removable beacon)
2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm
Floor
Steel floor at front
Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area
Fjdpfxoi Ri I Ee Abvogc
Rear chamfer with 70 mm softwood floor
Ramps
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable
Timber-decked
With spring-assisted support
Operating Instructions
An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted!
The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution)
Registration/Country Signs
Country of registration: Germany
1 with Dekra inspection and report (according to §13 EC - FGV)
24/7 Service Hotline
Prepared for two-line licence plate holder
Contour markings with reflective strips to ECE R 048, white on sides and red at rear
Paintwork
Frame RAL 3002 Carmine Red
10-year anti-perforation warranty
Drawbar, galvanised or black, as per manufacturer specification
Access ramps hot-dip galvanised
Note: Archive photos!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglZTS 200 Mähdrescher
Ara
Durum: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-bed Trailer
Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle.
Lashing Eyes for Low-Bed
Over front axle:
2 pairs of ring lashing eyes at 5t each, front at the gooseneck
Low-bed:
4 pairs of lashing eyes, side-mounted in the low-bed at 6t each
5 pairs of lashing eyes at 5t between the longitudinal beams
Drawbar / Turntable Trailer Coupling
Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps
(Drawbar length 1,700 - 2,300 mm)
Axles & Suspension
BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality.
Air suspension with raise/lower valve
Wheels and Tyres
235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish
Braking System
2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable.
Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation!
Electrics
24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS)
Floor
Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible.
Operating Notes
Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk.
Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations.
The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads.
Observe BO-circle regulations!!!
Registration / Plates
Fodpfei Ri N Asx Abvjgc
Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048
Paintwork
Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black
Note: Archive images!
Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglDTS 300
Ara
Durum: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information
Chassis Low-bed Trailer
Fgjdpfx Aboi Riwfjvsc
Steel welded construction
Turntable with heavy-duty ball bearing race
Foldable rear support
2 wheel chocks with holder
Side underrun protection made of aluminium
Full-width rear spray flaps
Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles
1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included)
Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width)
Central storage compartment for wooden beams on the loading area
70 mm wooden beams for widening to 3,000 mm
Lashing points on low loader
1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t
7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t
1x at the front on the gooseneck
6x in the drop deck
First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm
5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included)
2 pairs of additional fold-down lashing eyes, each rated 10t
1x on the gooseneck (projecting)
1x recessed in the floor behind the last axle
Trailer turntable drawgear
Drawbar with certified 40 mm towing eye
Axles & Suspension
SAF drum brake axles
Axle/chassis laser alignment to reduce tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer's choice with M&S marking
Steel wheels in twin arrangement, factory silver
Brake System
2-line compressed air braking system
Spring-loaded parking brake
2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle
ABS and ALB, with ABS connector at front, with connection cable
Brand: Wabco or Knorr
Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS!
Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red rear outline marker lights
2 x 7-pin non-interchangeable plugs at front, with connection cable
1 LED rotating beacon with holder, switched via parking lights (removable beacon)
2 pairs of warning panels, double LED illuminated and extendable to 3,000mm
Floor
Gooseneck at front with steel/chequer plate covering
Storage box recessed on the transition slope to gooseneck
After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area
Rear slope with 70 mm softwood floor
Low-bed platform including rear slope 6,500 mm
Loading ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift)
Wooden inlay on ramps
Spring lifting assistance
Operating instructions
At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!!
The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution)
Country of registration/Plates
Country of registration: Germany
Approval according t
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Triptis
2.248 km
Alçak yükleyici
FlieglVTS 400
Ara
Durum: yeni, makine/araç numarası: f79a9f15e7131d57a512793ab, boş ağırlık: 8.900 kg, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information
Chassis Low-loader Trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear supports
2 wheel chocks with holders
Side underrun protection in aluminium
Rear spray flaps over the entire width
Quarter shell mudguard in front of the 1st axle
Extendable side extensions to 3,000 mm (not in rear chamfer area)
(The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm)
Storage compartment for timber planks in the middle of the loading platform
70 mm timber planks for extension to 3,000 mm
Lashing eyes low-loader
1 pair of lashing eyes on the gooseneck, each with 5 t capacity
9 pairs of lashing mushrooms recessed in top and side of outer frame, each with 10 t capacity
2 x on the gooseneck front
7 x in the low bed
6 pairs of lashing holes in the outer frame of the low bed, each with 5 t capacity
(for attaching tie-down straps)
Coupling Device for Turntable Trailer
Drawbar with certified 50 mm towing eye
Axles/Suspension
SAF drum brake axles
Laser-aligned axles/chassis - reduces tyre wear and fuel consumption
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical inclusion
Axle load compensation front and rear (rocker balance)
Wheels and Tyres
235 / 75 R 17.5
Manufacturer’s choice
Steel twin wheels, factory silver
Braking System
2-line compressed air braking system
Spring-loaded parking brake
2 fail-safe coupling heads at the front, with connection lines to the towing vehicle,
Fgsdpfxsi Ri Izo Abvjc
ABS and ALB, with ABS plug at the front, with connection cable
Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS!
Electrics
24 volt, multi-chamber lamps, yellow LED side lights
2 white position lights at the front
2 white/red lane marker lights at the rear
1 LED beacon with bracket, switched via parking lights (removable lamp)
2 pairs of double warning boards, LED illuminated, extendable to 3,000 mm
2 x 7-pin fail-safe plugs at the front, with connection cable
Floor
Gooseneck front with steel/checker plate
then with 70 mm softwood floor, in the wheel arch area with steel/checker plate
Rear ramp with 70 mm softwood floor
Loading Ramps
Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable
timber-covered
Hydraulically operated via tractor power take-off with throttle, control on the left side at the front
Hydraulic connection with SVK plug NW 10/3, incl. hose
Operating Instructions
For an axle load of 10,000 kg, a special permit is required, only indivisible loads allowed!!!
The specified total weight is technically possible, but depending on the cargo, the total weight may not be achieved within the permissible axle/support/saddle loads. (Poor driving and trailing behaviour possible due to incorrect load distribution)
Registration Country / Plates
Registration country: Germany
with Dekra acceptance and report (according to §13 EC - FGV)
24/7 service hotline included
prepared for double-line license plate holder
Contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear
Paintwork
Frame DB 7350 Novagrau
10 year warranty against rust-through
Drawbar galvanised or black, at manufacturer's discretion
Loading ramps hot-dip galvanised
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Faymonville4-1+3-Achs-Tele-Semi-Radmulden-Rampen zg
Ara
Durum: yeni, boş ağırlık: 15.550 kg, azami yük ağırlığı: 47.450 kg, toplam ağırlık: 63.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck:
- Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long
- Rear gooseneck with bevel, approx. 1,000 mm x 10°
Loading Platform:
- Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10°
- A recess in the loading platform as well as into the bevel for accommodating the excavator bucket arm
- Pneumatic locking with conical locking bolts and reinforced locking positions
- Hardwood flooring on the bevel of the loading platform
Ramps:
- 1 pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide
- Ramps with hardwood covering
- Hydraulically foldable ramp tips
- Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward
- Square climbing strips 20 x 30 mm, at approx. 200 mm intervals on the outer frame of the ramp
Axles and Suspension:
- BPW axles and suspension, first axle steerable, all other axles hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse lock, activated automatically in reverse gear and manually
- Air suspension with lift and lower valve
- Tires: 235/75 R 17.5 twin tires
- TPMS tire monitoring system compliant with ECE R141
- TPMS tire sensors installed in all wheels, including spare wheels
Accessories included:
- Detachable front wall, steel, approx. 400 mm high
- 3kW electro-hydraulic power unit for operating hydraulic functions, except hydraulic cable winch
- Parking bracket for warning signs on gooseneck when not in use
- 1 spare wheel
- On the gooseneck: 1 pair of detachable ALU side boards, approx. 400 mm high, anodized
- On the gooseneck: one detachable ALU rear board, approx. 400 mm high, anodized
Fodpsk Aht Ujfx Abvegc
- Over the gooseneck: approx. 40 mm thick hardwood covering, checker plate covering above king pin
- 2'' king pin
- Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing gear with two-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- 1 intermediate table, approx. 300 mm wide
- Telescopic width extensions (galvanized) approx. 230 mm per side
- Wheel recesses with square climbing strips
- ALU covers for the wheel recesses
- 1 pair of mechanical rear supports
- Remote steering from front and rear via cable remote control, with single track axle monitoring
- 1st axle with automatic lifting axle function
- Central lubrication system with 1 pump, BEKAMAX brand
- Wireless remote control for remote steering, in addition to cable remote, with 2 indicator lights on receiver for single track monitoring
- Wabco Smart Board System
- 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for beacon
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
FaymonvilleMAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen
Ara
Durum: yeni, boş ağırlık: 15.420 kg, azami yük ağırlığı: 61.080 kg, toplam ağırlık: 76.500 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, lastik boyutu: 235/75/r17,5, renk: gri, Donanım: ABS, Gooseneck:
Gooseneck with rear bevel approx. 750 mm x 10°
3 pairs of lashing rings
30 mm thick hardwood flooring
Load area:
Extendable load area with rear bevel approx. 500 mm x 8°
Fjdpfx Abjl Sl Izevjgc
8 pairs of outward folding lashing rings
1 pair of flat-fitted lashing rings at the front of the load area
Recesses in the outer frame of the loading area for attaching tie-down straps
Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Two-piece steel ramps:
One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramp sections hydraulically lift and fold, hydraulically height-adjustable, and hydraulically shiftable. Maximum load per pair: 50,000 kg.
Landing legs:
• JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Axles and tires:
BPW axles and suspension, 4th and 5th axles steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lockout, activated via reverse gear and manually
Tires 235/75 R 17.5 3PMSF
Braking system:
Braking system according to EU regulations with EBS-E (4S3M)
Sockets and lighting:
Electrical system in accordance with EU regulations, lighting 24 volts
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin
Connection compliant with ISO:
24N ISO-1185
24S ISO-3731
15 pin ISO-12098
Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single color MB 7350 Novagrau
Rear part metalized and painted in RAL 9010 (pure white)
No metallic paint possible
Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)
Accessories:
One spare wheel with holder in front of bulkhead
2" kingpin
One galvanized steel front wall, approx. 400 mm high
Yellow-red air couplings mounted on the galvanized connector rail at the front
2 wheel chocks with holder on the front wall
Bracket at rear of gooseneck for ALU drive-on ramps
One holder for a rotating beacon at the rear of the trailer
Galvanized supports beneath the rear bevel of the loading area
White reflector tape according to EU regulations on the sides, extension, and rear in red
Electro-hydraulic unit at rear under the loading area
Mounts for warning signs with socket at the gooseneck and rear plate left and right
Ramp control valves fitted to right-hand side of the trailer
One mud flap at the rear of the trailer
Manual and documentation on USB stick
3.5" kingpin supplied loose
Plug-in ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm (LxH)
Rear galvanized drop-in stakes are removable (structure length approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or 40' container
6 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area
Galvanized extensions, extendable by approx. 230 mm per side
Lifting axle on the front axle with control via TEBS E, depending on the current axle load and current loading condition
Square cleats 20 x 20 mm every 200 mm on the outer frame of the loading area's bevel
On the checker plates, above the kingpin and the loa...
Küçük ilan
Dortmund
2.568 km
Alçak yükleyici
Meusburger2-Achs-Jumbo-Tiefbett mit Planenaufbau
Ara
Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 27.000 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 235/75 R17.5, renk: gri, işletme ağırlığı: 11.000 kg, Donanım: ABS, Chassis:
- Welded steel frame construction with front and rear frame cranking and drop deck without rear bevel
- Frame neck + fifth wheel plate 225 mm
- Drop deck designed for a point load of 25 t over 5 m
Fsdpjiu Eu Njfx Abvsgc
- Outer frame closed outward with welded-in lashing rings for securing loads
- Interchangeable 2" kingpin
- Rear mounting rail for aluminum ramps
Axles and Tyres:
- BPW low-bed trailer axles, each with a 10 t axle load, air bag diameter 360 mm
- Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm)
- Wabco SmartBoard with ECAS function for two coupling heights +100 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- IVTM tire pressure monitoring system
- 9 tires 235/75 R 17.5, tubeless
Steering:
- 1st and 2nd axle hydraulically forced steered via fifth wheel coupling
Floor:
- Multi-layer bonded flooring, 27 mm thick, flush with outer frame and longitudinal beams
- Underside reinforced with GRP coating
- 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 t – 6 pairs in the drop deck as well as 1 pair each on the gooseneck and at the beginning of the rear unit – 2 pairs of 4 t lashing rings on both gooseneck and rear unit)
- 6 pairs of mushroom-type lashing points in the outer frame in the drop deck
- Storage compartment with lid in the front left and right of the drop deck floor
Front Wall:
- 25 mm aluminum hollow profiles raised to the lower edge of the roof with integrated tarpaulin tensioning system
Sliding Tarpaulins:
- Sliding curtain both sides with welded-in vertical and horizontal straps (approx. 600 mm spacing) and stainless-steel tension locks
- Adjustable curtain straps (over-center) for loading width up to 4,000 mm including curtain extension with press studs and Velcro fastener
- Curtain extension in driving direction: 300 mm, in height: 750 mm
- Incl. eyelets for loose curtain extension part
- 1 pair of vertical curtain pockets approx. 1,000 mm length, positioned in the drop deck at the front cranking
- With belt pockets
Rear Wall:
- Steel rear portal frame with side tarpaulin hook-in device
- Aluminum double-wing door, 25 mm thick
- Both door wings fully foldable with door retainer
- One aluminum double-joint hinge and two recessed grip recesses per door wing
Front Corner Posts:
- At roof height, bolted at the front end
Central Posts:
- 3 pairs of continuously adjustable folding stanchions
- Stanchions can be moved along the entire length via trolleys
- Central stanchions in the drop deck can also be fixed at the rear platform
Roof:
- EDSCHA sliding roof (galvanized) with crossbeams that can be shifted in both directions (pushed together to the front in the cargo area)
- Rear portal cross member can be swiveled away
- PVC tarpaulin roof without customs seal
- Hand-operated hydraulic lifting roof on both sides, lift 450 mm
- Raised roof movable to the front (9x50) and rear (9x50) positions
- Including rear curtain extension and curtain skirt
- Roof can be cranked out at the very front on the bulkhead by 900 mm each
Accessories:
- Extendable warning boards (removable front and rear with socket) incl. position lights up to 4,000 mm loading width
- Storage for 4 warning boards on the front wall, top right and left inside
- 1 aluminum ladder with bracket, 2,500 mm long, mounted on the front wall
- 2 rows of self-locking aluminum slats
- Sheet metal fenders with mud flaps
- 1 night parking sign and 1 ADR panel on the rear wall
- Central lub
Sizin için aramayı kolaylaştırıyoruz: "hoet trailers yarı alçak yükleyici"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.



















































































































































