Kullanılmış Fliegl Tps 100 satın al (8.191)

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2015, renk: diğer, Üretim yılı: 2015, = Diğer seçenekler ve donanımlar = - Kaldırılabilir dingil - Yönlendirilebilir dingil = Notlar = Vliegen, 2015, BPW dingilleri, Nsdpfxeym Dchs Ak Sela Dingil 1 kaldırılabilir, 3 kişi yolu yönlendirdiğinde, Kayar duvar ile boşaltma = Diğer bilgiler = Arka dingil 1: Yönlendirilebilir = Firma bilgileri = Banka bilgileri: Rabobank Hesap: 39.33.10.655 IBAN: NL73RABO0393310655 Swift Kodu: RABONL2U - İşlemden önce banka bilgilerimizi her zaman kontrol edin! - Araç rezervasyonu depozito olmadan mümkün değildir. - Sunulan tüm araçlarda yazım ve metin hataları saklıdır.

Koşul: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t Nlodpfotrizksx Ak Sea 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Koşul: ikinci el, azami yük ağırlığı: 31.410 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2021, bir sonraki muayene (TÜV): 08/2026, yükleme alanı hacmi: 92 m³, toplam genişlik: 2.550 mm, Üretim yılı: 2020, Donanım: ABS, Acil ve kısa sürede teslim edilebilen tüm araç stoklarımızı web sitemizde bulabilirsiniz. Donanımdan bir alıntı. Tam donanım listesi talep üzerine sunulur. - 3 x SAF aks - Disk frenler - 1. aks otomatik kaldırma aksı - Havalı süspansiyon - 24 t, 2 kademeli destek ayağı, tek taraflı kumanda - Arkada uzatılabilir merdiven - Plastik alet kutusu, çekmeceli ve raflı - 2 hatlı basınçlı hava fren sistemi, EBS/ABS - Lastikler 385/55 R22.5 - Kayar taban Cargo Floor, yaklaşık 10 mm taban profili - Alüminyum boş profillerden arka kapak, çift kanatlı kapı - LED çalışma farları - Şasi rengi DB 7350 Novagrau - Kasa rengi RAL 7035 açık gri - Rulo brandası RAL 3002 karmen kırmızıya yakın Nsdjw Tpr Uspfx Ak Sela

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802011324, boş ağırlık: 5.340 kg, azami yük ağırlığı: 29.660 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2021, yükleme alanı uzunluğu: 10.000 mm, süspansiyon: hava, lastik boyutu: 385 / 65 R 22,5", renk: gri, Üretim yılı: 2021, The images are archive photos; the vehicle may still be in use! Chassis: Semi-trailer for containers Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight mounting plate, with sliding compensation, 2 wheel chocks with holders, aluminum side underrun protection, foldable steel rear underrun protection, half-shell mudguards with anti-spray flaps behind each axle 8 timber bolster frames (manufacturer's choice), each with 16 lashing eye-hook combinations, bolted to the frame, each with 2 telescopic timber stakes, extendable from approx. 2,000 to 2,800 mm, load capacity per pair 7 t Axles & Suspension SAF disc brake axles with 430 mm disc diameter, air suspension with raise & lower valve 1st axle automatic lift axle, additionally manually lowerable, can be operated via push button on the vehicle Wheels and Tires 385/65 R 22.5", Athos drop-forged steel rims, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the ABS functions correctly! Vehicle Stability System, EBS 2S/2M Electrics Nsdpfewk Hcgsx Ak Sola 24 Volt, multi-chamber lights, side yellow LED lighting, 2 x 7-pin non-interchangeable sockets at the front, without connecting cable, 2 x reversing lights at the rear Front wall Steel/mesh front wall, approx. 2,300 mm high Approval / Plates Country of registration: Spain, type approval according to EC 2007/46, prepared for double single-line number plate holder 1 x plastic, 1 x stainless steel (interchangeable)

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Nledpfexrx Nlsx Ak Ssa Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Koşul: ikinci el, azami yük ağırlığı: 33.520 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2011, Donanım: ABS, Vehicle identification no.: WFDFLT33502005191 REAR TIPPER – Steel chassis – ALU body German MOT (HU) valid until 04/2026 – Safety inspection (SP) until 10/2025 Unladen weight: 5,480 kg Body dimensions: 8,350 / 7,500 x 2,460 x 2,200 mm – Capacity: approx. 43 m³ BPW Eco Plus axles with drum brakes Nlodpfxswpbg De Ak Ssa 1 x aluminum landing leg Combination – swing doors – pendulum tailgate with 2 x sliders Rolling tarpaulin Platform Adjustable underrun protection Tyres: 385/65 R 22.5 Aluminum wheels Subject to alterations, prior sale, and errors excepted. The description is for general vehicle identification only and does not constitute a warranty in the legal sense. The specification according to the purchase contract is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops! Vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions for delivery and payment apply.

Koşul: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Total weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: approx. 10,410mm total, gooseneck approx. 2,490mm, loading platform including rear incline approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information Plus pre-shipping / handling from stock location 26639 Wiesmoor: €1,280.00 net Hire purchase offer: Term 48 months, down payment only VAT, residual value 40% Monthly rate EUR 759.00 Chassis, Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for axles 1 and 2 with anti-splash mudflaps behind each axle, Anti-splash mudflaps before and after axles 3 and 4 Excavator arm recess over rear axles extending to rear, approx. 1,800mm long, approx. 650mm wide and approx. 150mm deep 2 pairs of lashing holes rated to 5t each, in the excavator arm recess on the side of the longitudinal frame approx. 300mm from the front and approx. 200mm before rear incline 1 lockable plastic toolbox, w=600 / h=425 / d=460mm Recessed storage box in the gooseneck with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not in the rear incline) (Note: track width of machines or vehicles to be transported must not exceed external frame width of 2,550mm) Storage compartment for timber planks under the low-bed area 70mm timber planks for widening to 3,000mm Low loader lashing points 1 pair of lashing recesses in the front longitudinal member within the gooseneck, each rated to 10t 4 pairs of lashing holes on the outer frame, rated to 5t each (for securing straps) 9 pairs of recessed lashing mushrooms (above and side of outer frame), each rated to 10t 2 x at the front on the gooseneck 7 x on the low-bed deck First lashing point 250mm from the front and last max. 250mm from the rear, distance between lashing points max. 1,100mm 3 additional pairs of folding lashing points, each rated to 10t 1 x on the gooseneck (protruding) 1 x at the start of the low-bed deck, recessed inside the longitudinal beams 1 x recessed in the floor behind the last axle Drawbar assembly, turntable trailer Drawbar with certified 50mm towing eye Drawbar height adjustment via spring Axles and Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels & tyres 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be appropriately pre-equipped, not installed in this trailer; not a calibrated scale) Vehicle stability control system 2 fail-safe coupling heads at the front, with connecting lines to tractor unit, 12-24 Volt EBS, electronic braking system with EBS plug at the front, including connection cable Knorr make Note: This trailer may only be towed by vehicles that guarantee effective ABS operation! Nlsdpfx Ajvv D Ixek Sea Electrical system 12-24 Volt, multi-chamber LED lights, side yellow LED lighting, LED number plate lighting, (Note: Certain tractor units may show fault codes even though functionality is correct) 2 white front position lights, LED 2 red/white lane marker ligh

Koşul: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Chassis: low-bed trailer Steel welded construction Turntable with robust ball bearing race Foldable rear supports Wheel chocks with holder Full-width rear mudflaps 1 plastic toolbox Prepared for extensions to 3,000mm (holes in outer frame with covers, not in the rear taper) Tie-down eyes for low-bed 1 pair of lashing slots embedded in the front longitudinal member with cranking, each 10t 7 pairs of lashing pins, recessed in the top and sides of the outer frame, each 10t 1x at the front in the cranked area 5x in the low-bed 1x in the rear taper 12 pairs of lashing holes in the outer frame, each 5t (for tie-down straps) 5x cranked area, 6x low-bed, 1x rear taper Drawbar configuration – turntable trailer Drawbar with tested 40mm towing eye Drawbar height adjustable via spring Axles & suspension Drum brake axles (manufacturer’s choice) "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker balance) Wheels and tires 235/75 R 17.5" Manufacturer’s choice Steel rims, twin configuration, factory silver Braking system 2-line air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle Connection lines extended by approx. 60cm Without ABS, but with mechanical load-sensing valve; maximum approval for 60km/h Electrics 12 Volt, multi-chamber taillights, no side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red lane marker lights at rear 1x 7-pin 12V plug at front, with connection cable extended by approx. 60cm 1 LED beacon with holder, switched via parking lights (removable lamp) 2 pairs of warning boards, double, LED illuminated and extendable to 3,000mm Floor Cranked front area with steel/tread plate covering Storage box recessed in the drive-over slope towards the cranked section Then 70mm softwood floor, with steel/tread plate covering in wheel arch areas Rear taper with 70mm softwood floor Low-bed loading area incl. rear taper: 5,900mm Nlsdpjwlmr Dsfx Ak Soa Ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Wood-covered (tip area with steel/tread plate) Hydraulically operated, via tractor auxiliary drive with restrictor, controlled from left front side Hydraulic connection with SVK coupling NW 10/3, incl. connecting hose Operating instructions For axle loads of 10,000kg, a special permit is required; only indivisible loads permitted! The specified total weight is technically possible, but depending on the cargo, the admissible total weight may not be achieved while observing permissible axle, support, and saddle loads (poor driving or tracking may result from incorrect load distribution). Country of registration / registration plates Country of registration: Germany With Dekra inspection and certificate for max. 60 km/h approval, towing vehicle LoF (With Swiss registration, max. 40 km/h approval possible) Prepared for two-line license plate holder No contour marking / reflective strips according to ECE R 048 Paintwork Frame: RAL 7021 black grey "10-year anti-corrosion warranty" Drawbar: galvanized Ramps: hot-dip galvanize

Koşul: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable Nlodpfx Ajrducpok Sea 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Koşul: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm drive-up slope Loading height: 900 mm 1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, beacon, Comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator boom recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Njdsnzlg Depfx Ak Sola Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral shifting Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net Vehicle available from 11/09/2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Other 3-, 4- and 5-axle low loaders new and used available immediately.

Koşul: ikinci el, HKL 22 (0011) Lindner ve Fischer HKL 22 (0020) Şasi No: W09400222B0L13631 Nodpfx Asx Uuh Eek Ssla (0030) ikinci el

Koşul: yeni, makine/araç numarası: 745183e095a8a43501797c66c, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/2022, lastik boyutu: -, Further Information Tandem Platform Trailer Type TPS 180 Standard Construction Material with Forklift Mounting Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 4,600 kg +/- manufacturing tolerance Payload approx.: 13,400 kg Drawbar load: 1,000 kg Overall length approx.: 9,925 mm Maximum overall width: 2,550 mm Overall height approx.: 3,150 mm Internal length approx.: 7,750 mm Internal width approx.: 2,480 mm Platform height approx.: 1,200 mm Coupling height approx.: 380 mm Drawbar length approx.: 2,150 mm Chassis Central Axle Trailer Fine-grain structural steel welded construction Outer frame, new version, slightly angled, with load-lock profile for attaching lashing straps 1 pair of landing gears at the front, with straight lower section, operated from the right side 2 wheel chocks with holders Aluminum lateral underrun protection Steel rear underrun protection Quarter-shell mudguards 2 plastic toolboxes, with drawer and shelf, width = 650 mm / height = 520 mm / depth = 670 mm, lockable with padlock (padlock not included) Mounting for truck-mounted forklift at the rear, incl. 2 fork pockets, 2 extendable support tubes, chain securing mount with locking pin. Rear underrun guard with lighting unit foldable. Includes 2 loose rubber bumpers for rear wall protection, counterweight recommended! Note! Reduced ground clearance with forklift possible, potentially poorer trailing performance – no warranty! (Forklift own weight up to max. 1,900 kg for trailers). (With proximity switch for forklift control in combination with lift axle) Due to the forklift mounting, the axles are shifted to the rear; be aware of load distribution when driving without the forklift. Customer responsibility! Note! Forklift mounting! Carrying a forklift can significantly reduce the drawbar load. Front counterweight required! On wet and slippery roads, an additional customer-provided ballast weight or a load at the front bulkhead of at least 2 t is necessary; in this case, reduce speed and adapt driving to road and vehicle conditions. The forklift must always be secured with chains during transport. Distance between mast and body max. 45 mm; forklift tines must rest at the end of the fork pockets. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Towing Device Central Axle Trailer Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lifts) Underrun coupling drawbar Foldable bracket with spring assist on the drawbar, for routing of connection cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tire wear and fuel consumption Nledondwdhspfx Ak Soa Air suspension with lift & lower valve 1st axle automatic lift axle with proximity switch, for lift axle (only for operation with forklift) Wheels and Tires 385/65 R 22.5 to manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Vehicle – Driving Stability System Duomatic connection at front, with connecting line to the tractor unit, connection on front right EBS, Electronic Braking System with EBS connector at front, including connection cable Attention: The trailer may only be towed by vehicles that guarantee effective ABS operation! Electrics 24 Volt, multi-chamber LED lights, lateral yellow LED lighting, license

Koşul: yeni, makine/araç numarası: 8af4af460e7016a96d927f8f6, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis Swap Central Axle Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of guide rollers, removable, front and rear 4 container locks with sturdy outriggers, 20-foot basis for swap bodies 7.15 / 7.45 and 7.82 1 pair gearbox support legs at front, with straight bottom part and single-side operation on FR right 2 wheel chocks with holders Side underrun protection, aluminum Side underrun protection set inward for optimal clearance for swap body supports Underrun guard, steel Half-shell mudguards Splash flaps Central axle trailer towing device Towing drawbar with tested 50 mm towing eye, forwarding version (not suitable for trucks with tail lift; exact check required for each order) Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Coupling height: 380 (Note! Not printed in the offer; please compare with the technical data on the first page) Folding holder with spring support on the drawbar for guiding the connection cables to the truck Axles + Suspension SAF disc brake axles Axle/chassis laser alignment, reduces tyre wear and fuel consumption Air suspension Brake System 2-line compressed air braking system, color-coded line installation for easy service Air reservoir 208 liters Spring-actuated parking brake 2 fool-proof coupling heads at the front with connection lines to motor vehicle, connection on FR-right EBS, Electronic Braking System with EBS plug at front, with connection cable, connection on FR-right Attention: The trailer vehicle may only be towed by towing vehicles that ensure the functionality of ABS! With lift and lower valve, retaining function in both lower and raised positions Vehicle – Driving Stability System Wheels and Tyres 385/55 R22.5 — Brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lighting, side yellow LED lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable, FR-right connection Additional LED work light recessed in rear, switched on via reverse light LED work light at the front, centered between supports, directed to the rear, switched on via reverse light Registration Country/ Plates Germany Njdpji Riw Ujfx Ak Sela With Dekra approval and inspection certification (according to §13 EG – FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paint Frame DB 7350 Novagrau 10-year corrosion warranty Attention: Archive images!

Koşul: yeni, makine/araç numarası: 06b624786df9f4b5c196a36b0, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 285 / 70 r 19,5, Further information Chassis Central-Axle Tipping Trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing 2-speed mechanical support leg at the front Foldable rear support Wheel chocks with holders Steel underrun protection Rear mudflaps along the entire width Quarter-shell mudguards Lockable storage compartment for loading ramps underneath the loading area Central axle drawbar system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axles/chassis laser aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 285 / 70 R 19.5, manufacturer’s choice Steel rims, factory silver Brake System 2-line pneumatic brake system Spring-loaded parking brake 2 misconnection-proof coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, including connecting cable Electrics 24 Volt, multi-chamber lamps, side-mounted yellow LED lighting 2 white position lamps at the front 2 white/red lane-keeping lamps at the rear All lighting in LED design (Note! With certain towing vehicles, malfunction warnings may occur even when lights are functioning correctly) 1 x 15-pin plug at the front with connecting cable Hydraulics Three-way tipping gear, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If necessary, this must be retrofitted to the truck. Operated hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper Bodies Robust tipping body with 4 mm steel floor, steel drop-side construction, continuous side walls, drop and swing-mounted with central locking at the bottom. Rear corner stanchions removable. Tailgate drop and swing-mounted, with central locking at the bottom. Load bed length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop-side return springs (not possible with split side walls) Rear wall swinging and as double-leaf door (non-folding), with door holder and side protection rubber Load bed width: 2,420 mm 5 pairs of lashing eyes in the floor, each for 5 tonnes Registration/Country Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation, 15-year warranty against rust-through Side wall/bodywork RAL 3002, Carmine Red Note: Bridge interior only primed! Note: Archive images! Njdpoi Ri Ipefx Ak Sjla

Koşul: yeni, makine/araç numarası: 5b4d5b70c0e4954373dd5bf0b, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 435/50 r19,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust supports on a 20-foot basis for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at the front, with straight base and single-sided operation on the right side (FR) 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Half-shell mudguards Splash flaps Central axle trailer drawbar Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, further verification required per order) Underslung drawbar, free drawbar length approx. 2200 mm Coupling height: 380 mm (Note! Value not shown in the offer, please compare with the technical data on the first page) Axles & Suspension SAF disc brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Brake System 2-line pneumatic brake system, colored line routing for easy servicing Air reservoir 208 liters Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the truck, connection on right (FR) EBS, electronic braking system with EBS connector at the front, with connection cable, connection on right (FR) Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With raise/lower valve, holding function in raised/lowered position Wheels and Tires 435/50 R19.5, manufacturer at supplier’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof connectors at the front, with connecting cable, connection on right (FR) 2 additional LED work lights at the rear, activated via reverse light 1 LED work light front center between the supports, facing to the rear, activated via reverse light Country of Registration / License Plates Nljdpfx Akei Ri Iwo Sea Germany With Dekra inspection and certificate (according to §13 EC Vehicle Approval Regulation) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year anti-corrosion warranty Note: Archive images!

Koşul: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Welded steel construction Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame Foldable rear support Wheel chocks with holders Aluminium side underrun protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray mudflaps behind each axle 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) Extendable deck widenings to 3,000 mm (not in rear chamfer) (the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm Lashing Points Low-loader 3 pairs of 10 t lashing points integrated in the floor at the front 6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame 1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm 1 x rear chamfer 5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets) Trailer Drawbar Assembly - Turntable trailer Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Nlodei Ri N Hopfx Ak Ssa Spring-loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white/red lane marker lights at the rear 2 white position lights at the front 1 revolving beacon with holder, switchable via parking light (beacon removable) 2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm 2 x 7-pin interchange-proof plugs at the front, with connecting cable Deck Front section with steel floor, then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering Rear chamfer with 70 mm softwood floor Low-loading area incl. rear chamfer 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment) Wood covering Assisted by spring lifters Operating Notes Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility. The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions. Registration / Plates Country of registration: Germany Test approval according to EC 2007/46 24/7-Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame: DB Novagrau Ramps: hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: d0373d7a64f0aead858df4eb5, boş ağırlık: 2.621 kg, azami yük ağırlığı: 15.379 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis with Swap Body Turntable Fine-grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable Pair of guide rollers removable, front and rear 4 container locks with solid outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring Wheel chocks with holder Side underrun protection aluminium (Fliegl standard) Nodoi Ri Rgjpfx Ak Ssla Side underrun protection fitted inward, for optimal clearance to swap body supports Rear underrun protection, steel (Fliegl standard) Rear underrun protection shortened for optimal clearance to swap body supports, light units mounted protected Half-shell mudguards (Front, where technically feasible, otherwise with sheet metal cover + quarter-shell mudguards) With anti-spray flaps behind each axle Rubber rear-end buffer Drawbar trailer turntable coupling Drawbar with certified 40 mm towing eye Parking sockets for electrics/ABS on drawbar Brake/electrics terminal plate on drawbar, EBS and electrics removable, all connection lines to towing vehicle as spiral flex hoses Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Coloured line routing for easier servicing Air reservoir 208 litres Spring-loaded parking brake Duomatic connection at front, with connecting line to truck, spiral cable EBS by Wabco, electronic braking system with EBS plug at front, with removable spiral connection cable Attention: The trailer may only be towed by vehicles that ensure the ABS function! With raise & lower valve, hold function in both raised/lowered positions + auto-reset function, quick release valves on all axles Vehicle Stability Control System Axle load detection via EBS CAN-bus signal, for display in the driver’s cab, truck must be pre-equipped accordingly, no calibration/legal weighing system installed Wheels and Tyres 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber LED tail lights with resistor, side yellow LED lights, LED licence plate illumination (note: on certain towing vehicles, fault diagnostics may occur despite function) 2 white LED position lights at front 2 white/red LED lane marker lights at rear 1 x 15-pin plug at front, with removable spiral connection Additional LED work lamps at the rear, switched via reverse light LED work lamp front centre between chassis beams, rear-facing, switched via reverse light Registration Country / Plates Germany With manufacturer’s confirmation + brake calculation 24/7 service hotline Prepared for single-line number plate holder Warning plate to ECE-70 Contour marking with reflective tape to ECE R048, white side and red at rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Attention: Archive pictures!

Koşul: yeni, makine/araç numarası: 9de849c07b4d917b8d8e1d037, boş ağırlık: 2.990 kg, azami yük ağırlığı: 15.010 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 265/70 r19,5, Further information Chassis Swap Turntable Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-foot base for swap bodies 7.15 and 7.45 meters Turntable featuring a robust ball bearing slewing ring Wheel chocks with holders Aluminum side underrun protection Side underrun protection set inward for optimal clearance to swap body supports Steel rear underrun protection Shortened rear underrun protection for optimum clearance to swap body supports, lighting system mounted in a protected position Quarter-shell mudguards at the front and half-shell mudguards at the rear Coupling device for turntable trailer Drawbar with tested 40 mm towing eye Drawbar mechanically length adjustable in 6 x 100 mm increments (approx. 1700 – 2300 mm), drawbar length currently set to 2200 mm Axles & Suspension SAF disc brake axles Geometry/alignment of axles and chassis by laser to minimize tire wear and reduce fuel consumption Air suspension Brake System 2-line compressed air braking system with color-coded lines for easy servicing Air reservoir 180 liters Spring-loaded parking brake Nedpfxji Ri Rns Ak Ssla 2 error-proof coupling heads at the front, with connecting lines to the truck EBS by Wabco, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer must only be towed by tractor units that ensure ABS functionality! With lift & lower valve, holding function in both raised and lowered positions Wheels and Tires 265/70 R19.5, manufacturer as specified by OEM Steel twin wheels, factory silver Electrical System 24 Volt, multi-chamber LED lights with resistor, side amber LED lighting, license plate illumination in LED (note: some tractor units may display error messages, although functionality is assured) 2 white LED position lights at the front 2 white/red lane marker LED lights at the rear 2 x 7-pin error-proof plugs at the front, with connecting cables Additional LED work lights on both sides of the rear, operated by the reversing light Central front-mounted LED work light between support beams, rear-facing, operated by the reversing light Registration/Country & Plates Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Incl. loading for 2/3 stack, loading racks against deposit Prepared for single-line license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Nova Grey 10-year anti-perforation warranty Note: Archive images!

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Njdsi Ri Rvjpfx Ak Sola Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: eca976917d325d4adc41b69e8, boş ağırlık: 7.200 kg, azami yük ağırlığı: 27.800 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r 22,5, Further information Chassis semi-trailer for freight forwarding High-strength fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m loading length when retracted. 13 pairs of hooks for lashing strap attachment welded to the crossmembers 23 pairs of lashing rings recessed into the outer frame, each rated for 3.5 t Outer frame with load-lock profile for lashing strap attachment Note! Not usable with side walls! 24 t 2-speed landing gear in reinforced version for unhitching while loaded, single-sided operation, with semi-circular lower section and straight mounting plate, with thrust compensation Wheel chocks with holders Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray mud flaps in accordance with EU regulations 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 stake storage box, closed at the sides, open at the top, below the loading area, doors on both sides, W=450 mm/H=400/420 mm/D=2460 mm 6 pairs of extendable stake pockets for square tube stanchions 80x80 mm, extendable from loading width 2000 mm to 3100 mm 4 pairs of stake pockets recessed in the outer frame for square tube stanchions 80x80 mm 11 stake pockets centrally recessed in the floor for square tube stanchions 80x80 mm, with reinforcement beams, installed between the outer stake pockets 5 x 3 pairs of stake pockets on the outer longitudinal beams for square tube stanchions 80x80 mm, including reinforcement beams – for load securing to the front and rear during transport of reinforcing steel mesh, 2x5000 mm or 2x6000 mm 6 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, top with cable guides for strap tensioning 12 lightweight plug-in stanchions W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized with lashing rings welded to both sides at the bottom Note: Stake pockets/plug-in stanchions are not designed for sole securement of long materials, pipes, etc. without additional lashing 2 plastic tool boxes, with drawer and shelf, W=650/H=520/D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire cable and counter hook, with cable feed-through in the outer frame, 1 removable plug-in gearbox for reinforcing steel winches supplied loose (without frame mounting) Telescoping Main frame telescopic, extendable by max. 4000 mm and lockable at approx. every 500 mm Locking with pneumatic bolt locking + frame locking indicator on both sides, operation via manual button, control for brake/locking and suspension on driver’s side, ahead of the axles Storage compartment between longitudinal beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Rear axle is self-steering, with automatic reverse lock via reversing light, with additional lock function on the trailer via hand button, and manual override in the tractor unit (pin 10), no truck installation required. Offset axle spacing mm Air suspension 1st axle with automatic lift, also electrically controllable from the truck, with starting aid, no truck installation required (starting aid functional up to 30% axle overload and max. speed of 25 km/h) Brake System 2-line compressed air brake system Nledpji Ri Szefx Ak Sea Color-coded line routing for easy servicing Spring-actuated parking brake 2 error-proof coupling heads at the front, without connectio

Koşul: yeni, makine/araç numarası: 1acf251a278ec5cde4067a7b1, boş ağırlık: 5.800 kg, azami yük ağırlığı: 22.200 kg, toplam ağırlık: 28.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2-inch kingpin Outer frame slightly inclined, new version with load-lock profile for lashing straps 24 t, 2-speed landing gear, operated from one side, straight base, without compensating mechanism Free landing gear corner dimension or rear swing clearance approx. 1920 mm 2 wheel chocks with holders Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620 / height=360 / depth=440 mm, lockable with padlock (padlock not included) Axles & Suspension Drum brake axles, as per manufacturer’s choice Axles/chassis laser-measured to reduce tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded line routing for easier servicing Spring-applied parking brake Duomatic coupling front, without connecting hose EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that can guarantee the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and tyres 235/75 R17.5, brand at manufacturer’s choice Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connection cable Floor Approx. 30 mm thick phenolic resin plywood for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front panel / corner posts front 25 mm aluminium hollow section, approx. 1,350 mm high, corner posts steel in volume version Country of registration / plates Germany With DEKRA inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Nsdpfxekv Uvzo Ak Sjla Prepared for single-line license plate holder Conspicuity marking with reflective tape in accordance with ECE R 048, white on the sides and red at the rear Paint Frame hot-dip galvanized including passivation, 15-year anti-perforation warranty Front wall aluminium Attention! Archive images shown!

Koşul: yeni, makine/araç numarası: 6650f95fd39bb5625662ee336, boş ağırlık: 7.550 kg, azami yük ağırlığı: 27.450 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further Information Chassis, Semi-Trailer, Long-Haul Transport Fine-grain structural steel welded construction in lightweight design, extending to the landing legs; fifth wheel plate with replaceable 2" kingpin. Side floor prepared for lashing rings (max. 13 pairs) 24 t, 2-speed landing gear, single-side operation, with straight lower section, without shear compensation Rear pull-out ladder Door retainer on the side 2 wheel chocks with holders Side underrun protection in aluminium Underrun guard in steel with wide Fliegl mud flaps; foldable splash guard for lighting units Quarter circle mudguards Rear collision protection bumper Aluminum ladder approx. 3,550 mm, with side holder Tarp pole with bracket 1 plastic toolbox with drawer and shelf, dimensions: w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, including wheel fixing kit Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, activation by braking 3x (start assist active up to 30% axle overload and a max. speed of 25 km/h) Braking System 2-line air pressure brake system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, no connecting cable supplied Note: The trailer may only be towed by vehicles that ensure proper ABS function! With lift and lower valve Vehicle Stability Control System Wheels and Tires 385/55 R22.5, manufacturer at the discretion of the producer Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connecting cable SB Hydraulic Hydraulic cylinder with sliding mechanism integrated in the floor. Dual-circuit hydraulics. Forward/reverse motion switching is electric via wired remote control. -Push-floor power supplied via parking lights- Hydraulic operation via truck PTO (power take-off) Hydraulic connection with hose at front wall and HDK screw connector NW = 48 mm Note: A dual-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 ltr/min Pressure: 250 bar Minimum oil tank capacity: 100 ltr SB Floor Moving floor with wear plate at rear Floorboards made of 8 mm ribbed aluminium profile SB Body Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made from aluminum hollow profiles, fully welded at the top with a wide special reinforcement profile, welded-in special frame at the base. Moving wall for improved discharge of cargo, with reinforced tarpaulin flaps at the bottom. With rail cleaner Nedpfx Akji Riwxe Sjla Rear wall made of aluminum hollow profiles, as double-door (split 1/2 to 1/2), all round fitted with special U-profile with stop and rubber seal, 2 external locking rods, locked at top and bottom. Rear wall has mechanical safety lock, operated at rear, left side in traveling direction. Equipped with swiveling top crossbar. Door locks can be secured by padlock. Standing platform with ladder access on both sides (left/right in direction of travel), with guardrail, for opening/maintenance.

Koşul: yeni, makine/araç numarası: 65c7289da24c6dbb3dde7c971, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 265/70 r19,5, Further Information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 1 pair of gearbox support legs at the front, with straight base, individually operable support leg left and right Wheel chocks with holders Side underrun protection in aluminium Rear underrun protection in steel Half-shell mudguards Central axle trailer coupling device Drawbar with certified 50 mm towing eye, forwarding version (not suitable for trucks with tail lift, or detailed inspection required upon order) without adjustable length drawbar Axles & Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system, colour-coded for easy servicing Spring-loaded parking brake Duomatic connection at the front, with interconnection cable to the towing vehicle, connection on front right EBS, Electronic Braking System with EBS plug at the front, with connecting cable, connection on front right Note: The towed trailer may only be towed by vehicles that ensure the effectiveness of the ABS system! with lift & lower valve Wheels and Tires 265/70 R19.5, manufacturer brand at manufacturer's discretion Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red contour marker lights at the rear 1 x 15-pin connector at the front, with connecting cable, connection on front right additional LED work light at the rear, activated by reverse light Front LED work spotlight, centrally mounted between the main beams, rearward facing, controlled by reverse light Operating Notes The specified gross weight is technically possible. Depending on the cargo, the permitted gross weight may not be achievable within the permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Approval Country / Plates Germany with Dekra inspection and report (according to §13 EC - FGV) Nlodpfxji Rixcj Ak Soa 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape according to ECE R 048, side white and rear red Paint Finish Frame DB 7350 Nova Grey, 10-year warranty against rust-through Attention: Archive images!

Koşul: yeni, makine/araç numarası: 562ca26c733cc91276e95b716, boş ağırlık: 6.700 kg, azami yük ağırlığı: 28.300 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/55 r22.5, Further information Chassis semi-trailer forwarder Fine-grain steel welded construction in lightweight design, up to the support legs, fifth wheel plate with replaceable 2" kingpin Lashing point preparation in the floor along the sides (max. 13 pairs) 24 t two-speed landing gear, single-sided operation, with straight base, without load equalization Pull-out ladder at rear Door hold-backs on the sides 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps, foldable splash guard for lighting unit Quarter shell mudguards Rear collision protection Aluminum ladder approx. 3,550 mm, with side mount Tarp pole with holder 1 plastic toolbox, with drawer and shelf insert, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) 1 spare wheel holder for 1 E-wheel, with wheel fastening kit Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle / chassis laser alignment to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activation by braking 3x (traction aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Brake System 2-line compressed air braking system, colored piping for easy servicing Spring-loaded parking brake 2 unmistakable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: This towed vehicle may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With raise & lower valve Vehicle - drive stability system Wheels and Tires 385/55 R22.5 tire brand at the manufacturer’s discretion Steel rims, factory silver Nledpfx Akoi Riywo Sea Electrics 24 volts, multi-chamber lights, yellow LED side lighting 2 white position lamps at front 2 white/red marker lights at rear 2 x 7-pin and 1 x 15-pin unmistakable sockets at front, without connection cable SB Hydraulics Hydraulic cylinder with sliding device installed in the floor. 2-circuit hydraulic system. Forward/reverse operation switching is performed electrically via cable remote control. Sliding floor power supply via parking lights Operation hydraulically via truck PTO Hydraulic connection with hose on front wall and HDK screw connector NW=48 mm Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow performance: 110 l/min Pressure: 250 bar Minimum oil tank capacity: 100 l SB Floor Moving floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, grooved version SB Body Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, all around welded with a wide special reinforcement profile at the top, and with a special welded-in frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. With rail cleaner Rear wall made of aluminum hollow profiles, as a two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, fitted with 2 externally mounted locking rods, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left-hand side in the direction of travel. With pivoting cross brace at the top. The door locks can be secured with a padlock. Standing platform with ladders on both sides (left/right in the direction of travel) and railing, for opening.

Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear spray flaps Extendable widening sections up to 3,000 mm (not including rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for widening up to 3,000 mm Lashing eyes for low loader 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame 1x in the neck area Njdpei Riy Ejfx Ak Ssla The remainder are distributed in between, distance not greater than 1,200 mm 1x rear taper 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Towing Device Trailer Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Brake System 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake included. 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit ABS and ALB with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Twin steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable 1 LED beacon with holder, operated via parking light (removable lamp) 2 pairs of warning signs, double LED illuminated and extendable to 3,000mm Floor Front area steel floor, then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area Rear taper with 70 mm softwood floor Low-bed area incl. rear taper: 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber deck included With spring-assisted lifting Operating Notes At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted! The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips as per ECE R 048, side white and rear red Paint finish Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer’s choice Steel loading ramps hot-dip galvanized Please note: Archive images!