Kullanılmış Fliegl Vts S Parab/Feder satın al (48.832)

Koşul: yeni, makine/araç numarası: ebf3f771e96394cd89e56bbb7, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the exterior floor/frame, each rated at 5t 2 additional pairs of lashing eyes bolted to the floor in the corners, each rated at 5t Front support leg, gearbox type Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mud flaps Quarter mudguards 1 plastic toolbox with shelf, dimensions b=620/h=360/d=440 mm, lockable with a padlock (padlock not included) Drawbar Central Axle Trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension Drum brake axles as per manufacturer's specification Axle/chassis laser alignment for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (balancing rocker) Wheels and Tyres 235 / 75 R 17.5 as per manufacturer's specification Factory silver steel rims Brake System 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connecting lines to the tractor ABS and ALB, with ABS socket at the front and connecting cable Electrics 24 Volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, with connecting cable Hnjdpfx Aji Rixrogrsl Floor Steel chequered plate floor for high point load capacity Note: Slight floor undulation due to welding distortion possible! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner posts 25 mm aluminium hollow profile, 400 mm high Side walls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner posts 1 pair steel posts fixed to the frame with holders to secure loading ramps, clear entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps Surfaced with 3 serrated steel tracks Gas strut support for single person operation Registration Country/ Plates Registration country: Germany 24/7 service hotline Prepared for single-line licence plate holder Contour marking with reflective tape as per ECE R 048, white at the sides and red at the rear Paintwork Frame hot-dip galvanised including passivation 15-year warranty against rust-through Front wall aluminium Side wall aluminium anodised Loading ramps hot-dip galvanised Note: These are archive images.

Koşul: yeni, makine/araç numarası: 207ad28f83705ed0d38a4f174, boş ağırlık: 3 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 14 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r17,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes) Telescopic support leg at the front 1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR) Wheel chocks with holder Aluminium side underrun protection Steel rear underrun guard Half-shell mudguards Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending Drawbar equipment for central axle trailers Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering) Undercoupler drawbar Drawbar without length adjustment Axles + Suspension SAF drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Hedpfx Agsi Ri Iaorjnl Air suspension Brake system 2-line compressed air brake system, colour-coded line routing for easier service Spring-loaded parking brake Duomatic connection at front, with connecting line to the tractor, on the left (FR) Duomatic connection at front, with connecting line to the tractor, connection on the right (FR) EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR) Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve, holding function in each lift/lower position Vehicle - Drive stability system Wheels and Tyres 235/75 R17.5, brand as per manufacturer's choice Steel twin wheels, factory silver Electrics 24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected! 2 white position lamps at the front 2 white/red lane marking lamps at the rear 1 x 15-pin connector at the front, with connecting cable, on the left (FR) 2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift 1 x 15-pin socket at the rear left (FR) for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reverse light) Additional LED work light at rear, switched via reverse light Approval / Plates Germany With Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear Painting Frame DB

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Hsdpfxji Ri Rys Agrjnl Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: d24246f092ae53c0e155d19dd, boş ağırlık: 2.400 kg, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 16.000 kg, Further information Chassis tandem trailer Steel welded construction with approx. 152 mm high floor section; load-oriented and torsion-resistant steel frame structure. Longitudinal floor beams with a load-resistant outer frame and a guide tunnel every 600 mm, tunnel with positioning aids at the top and sides; tunnel height approx. 45 mm. 4 interchangeable container corner fittings on 20ft basis. 4 jack legs for jumbo parking height 970 mm, extendable and foldable sideways by 90°, with short safety strut and securing mechanism, pin lock on the frame, sturdy spring bolt as additional transport lock, symmetrical arrangement of legs Form A 2 for CWB C 745 / 782, suitable for parking height approx. 970 mm. Reinforcement between support legs. 7 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t. Heavy-duty pallet stops on both sides, approx. 20–25 mm high, lashing option every 200 mm, loading height reduced by approx. 20–25 mm. Side-mounted door retainers. Rear underrun protection made of flat steel. Flooring Phenolic resin-coated plywood panels, approx. 27 or 30 mm thick (manufacturer's choice), designed for high point load capacity, suitable for forklift axle loads up to max. 4,400 kg. Front bulkhead/corner posts 2,800 mm high, remaining section covered with tarpaulin; volume-optimized steel corner posts; quick-release device for side curtain at front bulkhead. Central stanchions 1 pair of sliding stanchions, adjustable along the full length, with four pockets for insert slats and long lower pocket. Insert slats 3 rows of aluminum V-insert slats or wooden insert slats as per manufacturer, plus 1 additional row of aluminum V-insert slats. Hnodpfx Askt Ni Uegrel Rear wall/corner posts rear Rear steel corner posts up to underside of roof, curtain suspension with round tube and tensioning ratchet. Rear portal doors, double-wing, each with 2 internal locking rods. Curtain Tarpaulin with welded-in horizontal and vertical tension belts. Tension locks in stainless steel. Roof Sliding roof; rear Endlift, can be folded up high at the back, roof slides from rear to front; L-roof beam designed for the automotive industry; internal width between roof beams approx. 2,490 mm, curtain color: white. EcoLift – lifting roof, can be raised by approx. 380 mm, gas-strut assisted. Approval / Plates Country of registration: Germany. Manufacturer's certificate according to EN 12642 XL. Paintwork Chassis hot-dip galvanized. Front corner posts hot-dip galvanized. Front wall aluminum. Rear corner posts hot-dip galvanized. Rear wall white. Tarpaulin RAL 9005 jet black with advertising lettering. Attention! These are archive images.

Koşul: yeni, makine/araç numarası: dd98a7658922be8f2e25bcadb, boş ağırlık: 2 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 10 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r 17,5, Further Information Chassis Central Axle Low Loader Trailer Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel fenders over both wheels Central axle trailer coupling system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & Suspension Euro-axles of our choice, with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 as per manufacturer's selection Steel rims in factory silver Braking System Dual-circuit compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure the functionality of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin, non-interchangeable connectors at the front, with connecting cable Platform TTS Low-profile steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Hnsdoi Ri Ebjpfx Agrol Platform length 4500 mm Trough front and sides with load-lock profile for lashing strap attachment (8 points at the front, 12 per side) Note: Slight floor waviness due to welding distortion possible! 2 pairs of lashing rings, 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons 2 additional pairs of lashing rings in the floor, each rated to 5 tons Loading Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Wooden surfaces Gas spring assist for single-person operation Operating Instructions The specified total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permitted axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to improper load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame RAL 3002 Carmine Red Loading ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 8e6cf81e11b107f23f22f209a, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19.5, Further Information Fine-grained steel welded construction, with preload light pretensioning in the neck area, fifth wheel plate with interchangeable 2" kingpin, outer frame slightly bevelled, new version with load-lock profile for lashing strap attachment, 24 t two-speed landing gear, one-sided operation, with straight lower section, without thrust compensation. Note: Free support leg clearance or free pivot radius to the rear approx. 1930 mm, sliding ladder at the rear, lateral door retainers, 2 chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection, quarter-shell mudguards in front of the first axle and behind each axle, with anti-spray mud flaps according to EC standards, rear impact protection. SAF disc brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption, air suspension. 2-line compressed air braking system, colour-coded line installation for easy service, spring-type parking brake, 2 polarity-safe coupling heads at the front, without connecting line, EBS electronic braking system with EBS socket at the front, without connection cable. Note: The trailer may only be towed by tractor units which ensure the effectiveness of ABS! With lifting & lowering valve, vehicle driving stability system. 435/50 R19.5 tyres, make at manufacturer's discretion, steel rims finished in factory silver. 24 Volt, multi-chamber lights, side yellow LED lighting, 2 white position lights at front, 2 white/red lane-keep lights at rear, two 7-pin polarity-safe sockets at front, without cables. Floor: approx. 30 mm coated plywood, laid on longitudinal cross members for high point load capacity, suitable for fork lift axle load up to max. 7100 kg Front wall / corner stanchions at front: 2, 580 mm high, steel corner stanchions in volume design, release device for curtain at front wall, crash blocker, with lower internal steel impact protection at approx. 140 mm height. Centre stanchions: 3 pairs of sliding stanchions along the full length, with quadruple stake pockets and long bottom pocket, 3 pairs of stanchion positions Slats: 5 rows of wooden drop-in slats. Rear wall / corner stanchions at rear: Rear corner stanchions steel up to lower edge of roof, attachment for curtain with round tube and tensioning ratchet, two-wing rear portal doors with two internal lock rods each. Curtain: Curtain with welded-in horizontal and vertical straps, tensioning fasteners made of stainless steel Roof: Sliding roof, rear end-lift foldable, roof sliding from back to front, L-roof rail for automotive industry, internal width between roof rails approx. 2490 mm, curtain colour: white, 400 Roof non-elastic, minimal sagging of roof rail during loading/unloading, optimal rain gutter at the rear (on top of end stanchion, above doors), EcoLift - lift roof can be raised by approx. 380 mm, with gas strut assistance, 3 driving positions at the front: internal height front approx. 2900mm / 2950 mm / 3000 mm, set to approx. 3000 mm Germany, Type approval according to EC 2007/46, 24/7-service hotline, Fliegl manufacturer certificate for body stability according to EN 12642 XL, prepared for single-line number plate holder, warning sign according to ECE-70, reflective stripes: white, continuous on lower side curtain and in corners at the top (when visible side walls, stripe at the bottom on side wall), reflective stripes: red, surrounding the rear portal. Frame DB 7350 novagrau, 10 years corrosion warranty, landing l Hsdpfx Aji Ri E Hjgrjnl

Koşul: yeni, makine/araç numarası: a3b1347da4aa7f31dceb875db, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes bolted to the floor/outer frame, each rated for 5 tons Gear support leg at front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter-shell mudguards Central axle trailer drawbar Drawbar with certified 40 mm draw eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer's choice Steel rims, factory silver Brake System Hedpfoi Ri Ilsx Agrjnl 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connections to the towing vehicle ABS and ALB, with ABS connector at front, incl. connection cable Attention: The trailer may only be towed by traction vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side LED marker lights (amber) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connecting cables Floor Steel / checker plate for high point load capacity Note: Slight floor warping possible due to welding distortion! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner stanchions 25 mm aluminium hollow section, 320 mm high Side walls 25 mm aluminium hollow section, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame with bracket for securing the loading ramps, drive-on width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with carry handles Wooden surface With gas strut for one-man operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable due to permitted axle, support, and kingpin loads (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Front wall aluminium Sidewalls aluminium, anodised Loading ramps hot-dip galvanised Note: Archive images!

Koşul: yeni, makine/araç numarası: c1946328bb4efe26fccb128ee, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385 / 55 r 22,5, Further information Chassis, Turntable Trailer, Waste Disposal Fine-grain steel welded construction 2 longitudinal beams with cross members, upper side of the longitudinal beams designed as a container roller track in wear-resistant version, rear-loadable, with run-up ramp. Suitable for roll-off containers with 6.5/7.0 m length. Container locking: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking system is an internal 2-point design and does not allow locking of roll-off containers with internal web (intended for transport of roll-off containers with subframe according to DIN 30722). Turntable with heavy-duty ball-type slewing ring Wheel chocks with holders Side underrun protection made of aluminum Rear underrun protection made of steel Half-shell mudguards Drawbar system, turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Wheels and Tires 385/55 R 22.5 Manufacturer’s choice Steel rims in factory silver Brake system 2-line compressed air braking system Spring-actuated parking brake Immobilizer: with open container locking, the spring-actuated parking brake is activated Vehicle stability control system 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Lift and lower valve Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable Registration/Country plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: DB 7350 Novagrau, 10-year warranty against rust-through Drawbar: KTL black Hnjdpfx Aji Ri Nmjgrel Attention: Archive images!

Koşul: yeni, makine/araç numarası: b6e633155abf971a017e4b53b, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385 / 55 r 22,5, Further information Chassis turntable trailer waste disposal Fine-grained steel welded construction Slide: Container is placed onto the slide from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external rollers Container locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation. The container locking is of an internally acting 2-point design, making it impossible to lock roll-off containers with internal sills. Turntable with heavy-duty slewing ring Wheel chocks with holder Aluminium side underrun protection Steel underrun protection Half-shell mudguards Vertical rear collision protection left and right, with delta rubber on underrun protection holder Drawbar for turntable trailer Drawbar with tested 40 mm towing eye Hjdpji Ri Nqsfx Agrenl Axles + Suspension SAF disc-braked axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Steel rims, factory silver Braking system 2-line air pressure braking system Spring-actuated parking brake Immobilizer: With open container locking, the spring-actuated parking brake is activated Vehicle stability control system 2 non-interchangeable coupling heads at the front, with linkage to towing vehicle, EBS, electronic braking system with EBS connector at the front, with linking cable Attention: The trailer may only be towed by vehicles that can guarantee efficient ABS operation! Electrics 24 volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 additional LED work light at the rear, switched via reverse gear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable Approval / Plates Country of registration: Germany With Dekra inspection and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Koşul: yeni, makine/araç numarası: e8628b18bda6db44719c946e0, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis swap turntable Fine grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust struts on 20' base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holder Side underrun protection, aluminium Side underrun protection inset for optimal clearance to swap body supports Rear underrun protection, steel Rear underrun protection shortened for optimal clearance to swap body supports, lighting system mounted in protected position Half-shell mudguards Drawbar assembly trailer turntable Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system, color-coded line routing for easy servicing Air reservoir 208 liters Spring-actuated parking brake 2 fail-safe coupling heads at front with connecting lines to towing vehicle EBS, Electronic Braking System with EBS plug at front and connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve, hold function in drop/raise position Wheels and tires 385/65 R22.5, make according to manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin, fail-safe plugs at front, with connection cable 2 additional LED work lights at the rear, switched via reverse light Hedpfsi Rivlsx Agronl 1 LED work light at the front, centrally mounted between supports, shining to the rear, switched via reverse light Registration/country plates Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Painting Frame DB 7350 Nova grey, 10 years warranty against rust-through Attention! These are archive images!

Koşul: yeni, makine/araç numarası: f044065451f6d849ee7a5b9f8, boş ağırlık: 5 kg, azami yük ağırlığı: 29 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385 / 65 r 22,5, Further Information Chassis for Semitrailer, Freight Forwarder Specification Reinforced steel welded construction, only 2 longitudinal beams as double-T profiles with steel/chequer plate in between the beams, fifth wheel plate with replaceable 2'' kingpin. Protective cover for tail lights. 1 steel toolbox recessed between the longitudinal beams 8 pairs of lashing rings, bolted or welded to the frame as per manufacturer's choice 24 t 2-speed landing gear, single-sided operation, with straight base, without sliding compensation 2 wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Half shell mudguards With anti-spray flaps compliant with EU regulations 1 spare wheel holder for 1 spare wheel, including wheel fastening kit 8 timber post cradles as per manufacturer's specification, bolted to the frame, each with 2 telescopic wooden stakes extendable from 1,800 to 2,800 mm, 7 t per pair. Axles & Suspension SAF disc brake axles with 430 mm disc diameter Air suspension with raise & lower valve, safety cable on axles 1st axle automatic lift axle, including forced lowering and start assist, operated via 3x braking (start assist functions up to 30% axle load exceedance and up to a max speed of 25 km/h) Axle spacing offset (Combined Transport) up to 44 t gross combination weight Wheels and Tyres 385 / 65 R 22.5 Manufacturer’s choice Steel rims, factory silver Braking System Dual-line air pressure brake system Spring-loaded parking brake Axle load detection via EBS-Canbus signal, for display in the driver’s cab; truck must be pre-equipped accordingly, not installed on truck (not an approved scale) 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connector cable Attention: This trailer may only be towed by tractors that guarantee correct ABS performance! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connector cable Front Bulkhead/Corner Posts Steel/mesh front bulkhead, approx. 2,300 mm high, bolted to the frame Approval / Plates Country of Registration: Germany Approval as per EC 2007/46 Prepared for single-line number plate holder Contour marking with reflective tape as per ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Novagrau Landing legs coated black Bulkhead hot-dip galvanized Hnedpfxsi Rivwo Agrjl Note: Archive images!

Koşul: yeni, makine/araç numarası: d7a33d709a92cd60f18d010e8, boş ağırlık: 3 kg, azami yük ağırlığı: 14 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 385/65 r22.5, Further information Chassis Central Axle Swap Body Trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with robust outriggers based on 20-ft configuration for swap bodies 7.15 and 7.45 1 pair of landing gears at the front, with straight lower section and single-side operation on the right (FR) 2 wheel chocks with holders Aluminum side underrun protection Side underrun protection set inward for optimum clearance around swap body supports Steel rear underrun protection Half-shell mudguards Splash flaps Central axle trailer coupling equipment Drawbar with tested 50 mm towing eye, freight carrier version (not suitable for trucks with tail lifts, exact checking required for specific orders) Axles & Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system, color-coded lines for easy service Air reservoir 208 liters Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, connection on right side (FR) EBS, Electronic Braking System with EBS connector at the front, with connection cable, connection on right side (FR) Attention: The trailer may only be towed by vehicles that ensure effective ABS operation! With lift & lower valve, hold function in both lifted and lowered positions Wheels and Tires 385/65 R22.5—Brand: Athos Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at the front, with connection cable, connection on right side (FR) 2 additional LED work lights recessed into the rear, controlled via reverse gear 1 LED work light centrally mounted at the front between braces, rear-facing, controlled via reverse gear Operating Notes The specified gross weight is technically possible; depending on the cargo, the gross weight may not be achievable within the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior can result from incorrect load distribution.) Country of Approval / Plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with ECE R 048-compliant reflective tape, white on the sides and red at the rear Hsdpfx Agei Riwbsronl Paintwork Frame painted DB 7350 Novagrau 10-year anti-corrosion warranty Note: Archive images!

Koşul: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Hsdpfx Agei Riwijrenl Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Koşul: yeni, makine/araç numarası: 068983c41e44eb5660fa9100c, boş ağırlık: 6 kg, azami yük ağırlığı: 28 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 435/50 r19,5, Further Information Chassis Semi Logistics Fine-grained steel welded construction with preload slight pre-tension in the neck area, fifth wheel plate with replaceable 2" kingpin X-tra Long, with 15,030 mm internal length Slightly sloped new outer frame version with load-lock profile for attaching lashing straps 24 t 2-speed landing gear, single-side operation, with straight lower part, without compensating foot Note: Free support leg corner dimension or clear rear swing radius approx. 1,930 mm Pull-out ladder at the rear Side door holders 2 wheel chocks with bracket Side underrun protection aluminium Rear underrun protection galvanized steel Quarter mudguards in front of first axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser measured to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line arrangement for easy service. Spring-loaded parking brake 2 foolproof coupling heads at front, without connection line Hedpoi Riwujfx Agrjnl EBS, Electronic Braking System with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor vehicles that ensure the effectiveness of the ABS! with lift & lowering valve Vehicle - Driving Stability System AAC Basic, automatic axle lift on the last axle as a maneuvering aid, active up to 20 km/h, can be deactivated manually Axle load detection via EBS canbus signal, for display on the in-cab monitor, truck must be correspondingly equipped, no installation (not a calibrated scale) Wheels and Tires 435/50 R19.5, brand as selected by manufacturer Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights Yellow LED side marker lights with flashing function, connected with indicator 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin foolproof sockets at front, without connection cable Floor Antislip phenolic plywood floor approx. 30 mm thick, on long longitudinal beams for high point load capacity for fork-lift axle load up to max. 7,100 kg Front wall / front corner stanchions 2,580 mm high, steel corner stanchions, volume construction, release mechanism for side curtain at front wall, crash blocker, inner lower section with steel bumper at approx. 140 mm height Middle stanchions 3 pairs of sliding stanchions, fully adjustable lengthwise, with four insertion pockets and long pocket below. 3 pairs of stanchion positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner stanchions Rear steel corner stanchions up to lower edge of roof, hooks for curtain with round tube and tension ratchet Double-wing rear portal doors with 2 internal locking rods each Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, rear end-lift foldable, roof slides from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal roof beam sag during loading and unloading EcoLift - lifting roof can be raised approx. 380 mm on both sides, with gas pressure strut support, 3 ride heights at front: Internal height at front approx. 2,900 mm / 2,950 mm / 3,000 mm, adjusted to approx. 3,000 mm Optimized rain gutter at rear, at upper end cross member, above doors Operating Notes Special permit required if overall train length exceeds 16,500 mm. When arrangi

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Hnsdpfsi Ri Nujx Agrsl Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle. Lashing Eyes for Low-Bed Over front axle: 2 pairs of ring lashing eyes at 5t each, front at the gooseneck Low-bed: 4 pairs of lashing eyes, side-mounted in the low-bed at 6t each 5 pairs of lashing eyes at 5t between the longitudinal beams Drawbar / Turntable Trailer Coupling Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality. Air suspension with raise/lower valve Wheels and Tyres 235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish Braking System 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable. Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation! Electrics 24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS) Floor Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible. Operating Notes Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads. Observe BO-circle regulations!!! Registration / Plates Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048 Hnedpfx Aoi Ri N Ajgrjl Paintwork Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black Note: Archive images!

Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Hnjdpfxei Riwfs Agrsl Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Koşul: yeni, makine/araç numarası: f80f2330e1318ef03bc20755e, boş ağırlık: 3.200 kg, azami yük ağırlığı: 35.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, fifth-wheel plate with replaceable 2" kingpin, only 2 longitudinal members as double-T-beams for subsequent mounting of a headboard rack at the front in the new/current design, outer frame slightly angled with load-lock profile for lashing strap attachment. Note! In order to attach straps in conjunction with drop sides, the sides must be opened! 24 t, 2-speed landing gear with single-sided operation, straight base, without slide compensation, wheel chocks with holders, foldable aluminium side underrun protection, extendable galvanized steel rear underrun protection, half-shell mudguards - loose, not installed!, with anti-spray flaps behind each axle, 1 plastic water tank, capacity approx. 30 l, installed on the left (direction of travel). Hnedpfx Agji Riwqorjl BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tyre wear and fuel consumption, air suspension, first axle with automatic lift axle, additionally manually lowerable, operable via push button on the vehicle. 2-line air brake system, with 1 standard central air reservoir, spring-loaded parking brake, 2 interlock-safe coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable, EBS 2S/2M, test connection for brake cylinder pressure leading outside on the EBS module. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! With lifting and lowering valve, control unit + brakes integrated in the frame as with tipper semi-trailers, mounted in front of the axles. Brake lining wear indicator on disc brakes via ABS/EBS lamp on the truck. 385/65 R22.5 Continental make, steel rims, factory silver. 24-volt multi-chamber lights, side-mounted yellow LED lighting as on tipper semi-trailers, 3,000 mm width must be observed, 2 front white position lights in LED, loose, 2 white/red lane marker lights at the rear, 2 x 7-pin interlock-safe sockets at the front, without connecting cable. Germany, approval to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double one-line license plate holder: 1 x plastic and 1 x stainless steel interchangeable holder. Warning panel according to ECE-70, aluminium, loose, EBS, safe parking, without contour marking / reflective tape according to ECE R 048. Frame: DB 7350 Nova Grey, Landing legs: black coated. Immediately available!

Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis: Semitrailer for Forwarding Operators Hnjdpfsi Ri Hvex Agrjl Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea

Koşul: yeni, makine/araç numarası: d9c951d746f03c05bc5470f89, boş ağırlık: 5 kg, azami yük ağırlığı: 29.045 kg, toplam ağırlık: 35 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 385/65 r22.5, Further Information Chassis Semi-Trailer Forwarding Fine-grain steel welded construction, fifth-wheel plate with interchangeable 2-inch kingpin Vario stanchion system 4 pairs recessed into the loading area, collapsible to 2,100 mm and extendable to approx. 3,500 mm for loading. Stanchions can be locked at 100 mm intervals for an internal width of 2,100 mm to 3,000 mm, 4 pairs of divisible stanchions 600 mm + 1,200 mm, total height 1,800 mm, removable. For an internal stanchion width above approx. 2,350 mm, oversize width. Vario bulkheads Floor prepared for the installation of 3 bulkheads. 4 x 5 pairs of Vario stanchion pockets for plug-in bulkheads (front and rear respectively), and 1 x 3 pairs each in the center for transporting welded mesh of 2 x 5,000 mm or 2 x 6,000 mm 2 Vario bulkheads, each consisting of 1 pair of plug-in stanchions and 1 crossbeam at the top approx. 2,200 mm wide. Crossbeam extendable by 220 mm on each side, with lashing hole for securing. Height of Vario bulkhead approx. 1,900 mm, adjustable to 1,300 mm or 700 mm. 4 stanchion pockets recessed in the center of the floor for 80 x 80 mm plug-in stanchions 1 pair of supports at the bottom for front Vario bulkhead 1 pair of supports at the bottom for rear Vario bulkhead Outer frame with slight incline, with Load-Lock profile for lashing strap hooks 14 additional pairs of lashing eyes recessed in the outer frame, 5 tons each 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensating device Pull-out ladder at rear Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Quarter fenders in front of and behind the axle assembly With anti-spray mud flaps only on the last axle Rear impact guard 8 construction steel winches with wire rope and counter hooks, 4 left and 4 right, with wire rope routing through the outer frame, 1 removable plug-on transmission for construction steel winches – supplied loose (without frame mount) 1 spare wheel holder for 1 E-wheel, with wheel fastener set 1 plastic toolbox, with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 stanchion storage box closed, open at the top, below the loading area, doors on both sides, w=450 mm / h=400/420 mm / d=2460 mm 4 lashing/stanchion rails set transversely in the floor across the full width to the outer frame (max. usable internal width between the outer plug-in stanchions approx. 2,170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, spaced approx. 60 mm apart (of the round steel). Bottom finishes with angle steel, half open downwards. For lashing and plugging in 80 x 80 mm stanchions. Note: Stanchion pockets/plug-in stanchions are not designed solely for securing long loads, pipes, etc. without lashing Axles & Suspension SAF disc brake axles with 430 mm disc diameter Hodpfxei Ri R Ds Agrjnl Axle/chassis laser aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by braking 3x (starting aid works up to 30% axle overload and up to a max speed of 25 km/h) Axle lift below the recommended driving height, therefore no warranty for tire damages Brake system 2-line compressed air brake system, color-coded line routing for easy service Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at front, no c

Koşul: yeni, azami yük ağırlığı: 34.310 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Vehicle / Body: Trailer Container Chassis Semi-Trailer Unladen weight: 3,690 kg Total length: 13,500 mm Width: 2,520 mm Fifth wheel height approx.: 1,120 mm Further information: - 3-axle - Frame hot-dip galvanized incl. passivation - 1 x 45-foot container with extended gooseneck tunnel and slanted front corners - 24 t, 2-speed landing gear, single-sided operation - Side underrun protection in aluminum, underrun protection in galvanized steel, extendable underrun protection for 45-foot containers - Plastic toolbox - Air suspension - 1st axle with automatic lift axle - Tyres 385/55 R22.5 Hnedpfxek N Acus Agrsl - 2x 7-pin and 1x 15-pin sockets in front From current production

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2021, yükleme alanı uzunluğu: 7.150 mm, yükleme alanı genişliği: 2.460 mm, yükleme alanı yüksekliği: 1.750 mm, süspansiyon: hava, lastik boyutu: 385/65r22.5, dingil mesafesi: 1.310 mm, Üretim yılı: 2021, Tire size: 385/65R22.5 Suspension: Air suspension Drive: Wheel Hjdpfx Agsvxqu Rorenl GVW: 39,000 kg Tipping: Rear

Koşul: yeni, azami yük ağırlığı: 13.200 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.550 mm, Gross weight: 18,000kg / 21,000kg Unladen weight: 4,800kg Payload: 13,200kg / 16,200kg Overall length: 9,450mm Loading length: 7,500mm incl. rear bevel Width: 2,520mm Loading height: 860mm Hnodpfx Agsr Da Uverjl Additional information: - Frame painted in stock colour Nova grey - 70 mm wooden floor - Steel ramps, 2,800mm long x 750mm wide, laterally adjustable - With spring assist - Folding rear support - Aluminium side underrun protection - Plastic toolbox - 3m widening package - Large lashing package – 5 pairs of flush-mounted ring lashing eyes in the outer frame (can be converted to stake pockets), each rated to 5t, 7 pairs of lashing mushrooms flush-mounted at the top and side of the outer frame, each rated to 10t - 50mm towing eye - Air suspension - Lift & lower valve - Axle load detection via EBS CAN bus signal - Tyres: 235/75R17.5 - 2 x 7-pin connectors at the front - LED beacon - 2 pairs of warning boards, double LED illuminated, extendable to 3m Plus delivery/hand-over ex stock location 26639 Wiesmoor €1,280.00 net

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902028370, boş ağırlık: 6.015 kg, azami yük ağırlığı: 28.985 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 04/2021, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.030 mm, süspansiyon: hava, lastik boyutu: 435/50 R19,5", renk: siyah, Üretim yılı: 2021, Donanım: EBS (Elektronik Fren Sistemi), Chassis semi-trailer for haulage Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outward frame slightly inclined with “Load-Lock profile” for lashing strap attachment, if fitted to the frame. Note: To hook the straps in combination with side walls, the side walls must be opened! 24 t, 2-speed landing gear, one-sided operation, with straight lower section, without compensation for telescopic movement Note: Free landing gear foot corner dimension or free swing-through radius at the rear approx. 1930 mm, without supports. Extendable ladder at the rear, door retainer to the side 2x wheel chocks with holders Side underrun protection in aluminium Rear underrun guard, galvanized steel Quarter-shell mudguards in front of the 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear buffer, pallet stop on both sides approx. 15–20 mm high, bolted design, reduces loading height by approx. 15–20 mm Plastic toolbox with drawer and shelf, dimensions w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & Suspension SAF disc brake axles “Axle/chassis laser alignment”: Reduced tire wear and fuel consumption, air suspension, without lift axle Brake System 2-line compressed air brake system, colour-coded piping for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without coupling line EBS, electronic braking system with EBS socket at the front, no connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 435/50 R19.5”, tyre brand at manufacturer’s discretion, alternatively 385/55 R19.5 Steel rims, factory silver finish Electrics 24 Volt, multi-chamber lights, amber LED side marker lights 2 white position lights at the front 2 white/red demarcation lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cables Floor Resin-coated plywood panels approx. 30 mm thick, laid on longitudinal crossmembers for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Body Body mounted Front wall / front corner posts 2,580 mm high, corner posts made of steel in volume design, release mechanism for side curtain at front wall, “Crash blocker”, lower internal, with steel buffer at approx. 140 mm height Centre posts 3 pairs of sliding posts, adjustable along full length, with 4 pocket receptacles each and extended pocket at the bottom 3 pairs of post positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner posts Rear corner posts in steel, up to the lower edge of the roof, curtain rail with round tube and tensioning ratchet Rear portal doors, double-wing, each with two internal locking rods Curtain Curtain with welded horizontal and vertical straps Tensioners made of stainless steel Roof Sliding roof, rear end-lift hinged upwards, sliding from rear to front, L-roof rail for automotive industry, internal width between roof rails approx. 2,490 mm, curtain colour: white Non-elastic roof, minimal bending of roof rail during loading/unloading Hnjdox Sqmrjpfx Agrol EcoLift – roof raisable by approx. 380 mm, both sides, with gas strut assistance, 3 driving positions at the front: internal front height approx. 2,900 mm / 2,950 mm / 3,000 mm, factory set to approx. 3,000 mm Optimized rear rain gutter, at top of rear crossmember, above doors

Koşul: yeni, boş ağırlık: 6.000 kg, azami yük ağırlığı: 24.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.540 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, Üretim yılı: 2026, Donanım: ABS, merkez döner tabla, 3-AXLE HUMBAUR LOW-LOADER TRAILER INCLUDES: 3 PAIRS OF 6-TON LASHING POINTS IN THE OUTER FRAME => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED TURNTABLE FRAME => HOT-DIP GALVANIZED RAMPS => 10 UNITS 10-TON LASHING POINTS => 10 UNITS 3-TON LASHING POINTS, OUTER FRAME => 8 UNITS 2-TON LASHING POINTS, ABOVE WHEELS Hjdpfod U A Tgex Agrjnl => SPRING-LIFTING MECHANISM FOR RAMPS => 40 MM DIAMETER TOWING EYE => RAMPS APPROX. 2,700 MM LONG => RAMPS APPROX. 750 MM WIDE => TWIN TYRES 235/75 R17.5 => LOADING HEIGHT WHEN LOADED ONLY APPROX. 860 MM => COUPLING LENGTH / B-LENGTH APPROX. 10,720 MM => FRONT CORNERS BEVELLED => TWO FOLDING SUPPORT LEGS AT REAR => AND MUCH MORE => Delivery freight: EUR 2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn, Tel. DOLL Fahrzeugbau *Subject to prior sale and modifications!* *Price valid ex works D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general reference only => may contain/show optional accessories at additional cost*