Kullanılmış Müller-Mitteltal Ka-Ta-R 11,9 Rampen 3-S Kipper Verzinkt satın al (67.120)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Alaka düzeyi
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Üretici
- Üretici Z'den A'ya
- Üretici
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Modeli
- Modelden Z'den A'ya
- Modeli
- En düşük referans
- Başvuru
- En yüksek referans
- Başvuru
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Alaka düzeyi
- Alaka düzeyi
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
Godpfxsl Thxdj Acteub
* 3 x 11 ton BPW Eco axles
* Parabolic leaf springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning panel sets at front and rear
* VA closed plastic mudguards and HA straight galvanized steel skirts, each with spray protection
* Contour marking tape, reflective on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED rear lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical plug
* Four socket pockets on each side (no stakes included) with integrated lashing options
* Load securing package consisting of: 2 lashing rings (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for 3 m total width (not in the rear chamfer)
* Widening planks stored in the center of the loading area
* Digger arm rest above the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the digger arm rest area)
* Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm)
* 4-way control valve block for the later retrofitting of hydraulic ramp shift
* Mechanically operated lateral ramp shifting
* Loading platform above the turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading platform: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg tare weight
* --Permissible gross weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex works Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (tire pressure monitoring system)
Gjdpfx Ajx Ipbgocteub
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray guards
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not supplied), also usable as lashing points
* Load securing package consisting of: 2 lashing rings (6.4 t) at front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions, integrated into the outer frame — corners rated for 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not fitted at the rear slope)
* Widening planks stored in the middle of the loading area
* Digger stick rest above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the digger stick rest)
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic side-shifting of ramps
* Load area over the turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (including 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in a black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from approx. calendar week 36/2026
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Swing-out supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with spray guards
* Lateral and rear reflective contour tape
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin electrical plug
* Four stake pockets on each side (no stakes included) with simultaneous lashing possibility
* Load securing package (La-Si package) consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t.
* 6 pairs of mechanical fold-out outriggers for 3-meter total width (except at the rear incline)
* Widening planks stored in the center of the loading area
* Excavator arm rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest)
Gusdpfxox Ipb Hs Actsb
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm)
* Hydraulic lateral ramp displacement
* Load area above the turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible total weight of 30,000 kg technically possible--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and intermediate sale reserved
* Available from approx. week 36/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.750 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* LED lighting
----General Attachments:
* Support winch at the front
* Fold-out external support legs at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
Godpfxev D Tcbj Acteub
----Low Loader Platform:
* 50 mm softwood floor
* Preparation for retrofitting container locks in front of bulkhead and rear slope for transporting 20" containers
* Bolted smooth steel bulkhead
* Side walls made of trapezoidal steel sheet, split and foldable once in the center
* Rear wall made of steel, can be slid and stored between the ramp holders when not in use, inside in front of the bulkhead
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t folding lashing eyes at 600 mm intervals
* In each front and rear corner: one 6.3 t lashing ring
* Multiple holes for 1.2 t lashing options in front and rear crossmember
* Profifix lashing rail along centerline for lashing up to LC 3,000 daN
----Ramps:
* One-piece mechanical grating ramps with spring assist for one-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness)
* Rear approach angle approximately 860 mm on chassis
----Wheelbase:
* Wheelbase 1,140 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, support legs, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and support winch painted in black
* Side walls painted in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced and certified body according to EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 30 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTALRA-T 18,0 Außenroller, feuerverzinkt, Neu
Çağrı
Koşul: yeni, azami yük ağırlığı: 14.620 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RA-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
* Tire pressure monitoring system (RDÜ)
* Emergency release device for spring-loaded cylinders
* Disc brakes
* 2 x 10 t BPW wide-track axles
* Air suspension (automatic lowering when brake is uncoupled)
* Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* Plastic tool box 450 x 470 mm, mounted on the right side
* Side-mounted storage box 1,000 x 500 x 500 mm
* Closed plastic mudguards, front and rear
* Closed lateral underride protection, usable as advertising surface
* Rear underrun protection
* Rear plastic bumper pads
* Rear hazardous goods placard
* 15-pin electrical connector
* LED rear lights
* Rollway length approx. 6,830 mm
* Pneumatic 4-point container lock
* Mechanically adjustable stop brackets (2 positions) front left and right on the tracks
* 265/70 R 19.5 twin tires
* Unladen weight 3,220 kg
* --Permissible total weight up to 20,000 kg technically possible--
* Approx. 1,130 mm ride height when loaded
* Suitable for container lengths from 5,500 to 7,000 mm
* Hot-dip galvanized chassis
* Air tanks, axles, slewing ring, and drawbar
Guedev Nulzopfx Actob
* New vehicle with manufacturer’s warranty
* Errors and prior sale reserved
* Available from approx. week 29 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1 = for roll-off containers and as a low-bed trailer
Gjdpfx Acel Tq Nmstoub
----Braking system:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10 t axles
----Suspension:
* Air suspension with lifting and lowering system as well as RTR valve
----Drawbar:
* Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device
----Electrics / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required)
* LED rear lights 12 / 24 V
* 15-pin electrical connector
----General attachments:
* Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm
* Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm
* Reflective contour marking tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with spray suppression
* Plastic rear bumper buffer
* Folding A-sign at rear
----Loading platform:
* Main frame with raised outer rails for guiding roll-off containers
* Steel floor plate with recesses for rollers in the bogie area
* Container length possible from 5,500 - 7,000 mm
* Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1
* Weld bead as anti-slip surface in the inclined running track area
* Mechanical drop-down rear supports
----Load securing:
* 1 pair 10 t UVV lashing rings at the front bulkhead support
* 3 pairs 10 t UVV lashing rings at the lateral outer frame
* On each side, 4 x 2 t lashing eyes in cloverleaf design
* 4 x 8 t recessed lashing brackets in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized
* But the drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer's warranty
* Subject to errors and prior sale
* Reference images
----Delivery time:
* Available approx. from CW 43 / 2026
Küçük ilan
Egestorf
2.485 km
Roll-off dorse
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Çağrı
Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0:
* 2-in-1: For hook lift containers and as a low-loader trailer
----Braking System:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 10 ton axles
Godpsl Tpc Aofx Actjub
----Suspension:
* Air suspension with lifting/lowering system and RTR valve
----Drawbar:
* Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment
----Electrics / Lighting:
* Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* LED rear lights, 12 / 24 V
* 15-pin power plug
----General Attachments:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm
* Reflective contour tape on sides & rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Plastic rear impact buffers
* Folding A-board at the rear
----Loading Platform:
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container lengths from 5,500 – 7,000 mm possible
* Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1
* Weld seam as non-slip coating in the ramp area
* Mechanical falling supports at rear
----Load Securing:
* 1 pair 10 t UVV lashing rings at the front wall carrier
* 3 pairs of 10 t UVV lashing rings on the sides in the outer frame
* 4 x 2 t cloverleaf-type lashing eyes per side
* 4 x 8 t lashing brackets set into the outer frame
----Ramps:
* 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear)
----Paintwork:
* Chassis, bogie, locking parts, and rear supports hot-dip galvanized
* Drawbar, axles, and air tanks painted in a black tone
----Information:
* New vehicle, never registered, with full manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery Time:
* Available from approx. week 43 / 2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle compensation at the rear
* Side underrun protection
* Swivel supports at the rear on the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front closed plastic fenders as well as rear straight galvanized steel mudguards, each with splash protection
* Side and rear conspicuity tape, reflective
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment by means of tension spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets per side (stakes not included) with simultaneous lashing capability
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of swivel- and retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – with 13.4 t in the corners and 10 t elsewhere
* 6 pairs of mechanical folding supports for a total width of 3 meters (not in the rear slope)
* Widening boards stored in the center of the loading area
* Digger arm rest from the rear axle to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the digger arm rest)
* Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm)
* 4-way control block for later retrofitting of hydraulic ramp shifting
* Mechanically adjustable lateral ramp movement
* Load area above slewing ring: approx. 1,960 x 2,520 mm
* Load height unladen approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Load height unladen approx. 910 mm (incl. 860 mm approach slope)
* Chassis, bogie, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black
* 235/75 R 17.5 twin tires
Godpfx Acol Th Adetoub
* 5,900 kg empty weight
* -- technically permissible gross weight of 30,000 kg --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Luftfed.
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.700 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profi 30.0:
* Wabco EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with raise/lower function and RtR valve
* Smart-Board as infotool
* Side underrun protection
* Rear swing-out supports on chassis frame
* Mechanically adjustable warning sign sets front and rear
* Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender panels, each with splash guards
* Reflective contour tape on sides and rear
* Hinged (hot-dip galvanized) toolbox lid on turntable platform
* LED tail lights
* Removable beacon at the rear
* Towing bar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets per side, each with integrated 2 t lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame (13.4 t at corners, otherwise 10 t)
* 6 pairs of mechanical folding outriggers for 3 m overall width (except at the rear chamfer)
* Widening planks stored in the center of the loading platform
* Hydraulic, one-piece loading ramps (approx. 3,000 x 720 mm), adjustable laterally
* Excavator boom trough above the rear axle up to the end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted on the sides of the trough)
* Loading area above turntable: approx. 1,960 x 2,520 mm
Gujdpfx Asl Tq Euectsb
* Unloaded loading height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unloaded loading height: approx. 910 mm (including 860 mm rear approach slope)
* Chassis, turntable, towing bar, folding extensions & ramps hot-dip galvanized
* Axles, turntable, air reservoir etc. painted in black
* Tires: 235/75 R 17.5
* Payload approx. 24,000 kg at 30,000 kg gross weight
* New vehicle with manufacturer’s warranty
* Errors and prior sale reserved
* Available from approx. week 32 / 2026
* Sample images
Küçük ilan
Thalgau
2.028 km
Üç yöne devirmeli römork
SCHWARZMÜLLER2 ACHS TANDEM 3 SEITENKIPPER LUFT ABS
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 13.850 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/1995, bir sonraki muayene (TÜV): 05/2026, Üretim yılı: 1995, Donanım: ABS, Tam çalışır durumda
Gsdpsy Dmupsfx Actsub
Küçük ilan
Alsdorf
2.622 km
Römork
MÜLLER-MITTELTALKWH 8,8 ML Kabeltransport mit Separatmotor
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 6.000 kg, toplam ağırlık: 8.800 kg, dingil konfigürasyonu: 1 dingil, ilk tescil: 05/2026, Donanım: ABS, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer
* AS NEW and available
* Reference number for inquiries: 11652
* RDÜ tire pressure monitoring system
* EBS brake system, drum brakes, BPW axles, parabolic springs
* Front support winch, rear spring-assisted square tube supports with base plate, safety lock pins for various support heights
* Tow bar with 40 mm towing eye (height-adjustable mm)
* 15-pin electrical connector
* LED lighting
Guedey Rb Tyjpfx Actob
* 315/80 R 22.5 tires, fully covered steel mudguards
* Swiveling cable drum superstructure
* Steel drum shaft with 76 mm diameter, with centering and rotating ends
* 1 pair of stepped polyamide centering cones
* Suitable for drums Ø 800-3,000 x (1,700 mm width between drum arms)
* With tension lock for securing the drum at the carrier arm ends, and a locking device between the cable drum superstructure and the chassis with a centrally positioned claw lock
* Motor-hydraulically operated pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic system connectors, hoses, and pipes in NW 13.
* Drum drive is motor-hydraulic with oil motor, valves, and rubber-lined drive rollers (adjustable). Hydraulic speed regulator and drum drive brake.
* Also includes a hydraulic power unit: Hatz 1B30 Silent diesel engine with hand starter, 6.5 HP (150 bar), pressure supply selectable either via truck hydraulics or the power unit by swapping connection lines
* Toolbox approx. 500 x 350 x 400 mm
* Chassis and drawbar hot-dip galvanized
* Advertising space integrated into the side guard, exterior polyester-coated in RAL white
* ----as-new condition (used for only 1 project)
* ----
* Financing is possible through our partners with or without down payment and final value, and with various terms. Contact us for a quote!
* We are an official Müller Mitteltal dealer!
* Example hire-purchase from our partner FM LeasingPartner starting from only €515/month (net) for a 72-month term (no down payment and €0 final value).
* Request your quotation now!
----
* Our Opening Hours
* Monday – Thursday: 08:00 – 17:00
* Friday: 08:00 – 15:00
* Outside these hours, appointments can be arranged as needed
* We speak German, English, Russian, Polish and French
----
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Braking System:
* Drum brakes
* Electronic brake system (EBS)
* Emergency release device for spring-actuated cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange drawbar eye
----Lighting / Electrics:
* Tire pressure monitoring system (TPMS)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox, front right exterior on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Lowbed Platform:
* 50 mm softwood floor
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted smooth steel front wall
* Drop sidewalls made of trapezoidal profiled steel, foldable with drop-side spring assist
* Steel rear wall, retractable between the ramps (storage bracket in front of the front wall when not in use)
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option for installing 3 t folding lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drill holes in the front and rear crossmember for 1.2 t lashing options
Guodpexglibefx Acteb
----Ramps:
* One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, drive-on ramps, and rear wall
* Drop sidewall color in RAL 9010 pure white
* Custom sidewall color in any RAL shade available at extra charge
----Information:
* --Reinforced and certified body to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery Time:
* Available from approx. CW 27/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Draw Eye:
Guodpfxoxglh Rj Actjb
* Height-adjustable drawbar by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange draw eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Outward-facing hot-dip galvanized foldable support legs at the rear
* Plastic toolbox front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Fold-down trapezoidal-profiled steel side walls with drop-side spring assist
* Steel rear wall insertable between the ramps, holder for non-use inside in front of the bulkhead
* Rear stakes bolted
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* 1 x 6.3 t lashing ring in each of the front and rear corners
* Various bores in the front and rear crossmember for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grid ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Rear drive-on slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side walls in a RAL color available at extra charge
----Information:
* --Reinforced and certified body to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery Time:
* Available from approx. week 27/2026
Küçük ilan
Thalgau
2.028 km
Damperli yarı römork
SCHWARZMÜLLER3 SEITENKIPPER LUFT LIFT ABS
Çağrı
Koşul: ikinci el, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2006, bir sonraki muayene (TÜV): 04/2026, Üretim yılı: 2006, Donanım: ABS, Her şey XXL çalışıyor
Gsdpfx Acjy Ag Nwjtsub
Küçük ilan
Winterswijk
2.630 km
Düşük yükleyici
Müller-MitteltalTTS-VLL 30.0 Profi.
Çağrı
Koşul: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 10/2013, toplam genişlik: 2.750 mm, Üretim yılı: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Low Loader | 3-axle | Hydraulic Low-Bed Platform | 48 t GVW | 275 cm wide
Gjdjy I Si Topfx Acteub
The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi low loader is ideally suited for the transport of machinery, construction equipment, and heavy-duty devices. It is renowned for its sturdy construction and reliability.
Technical data:
- Manufacturer: Müller Mitteltal
- Model: ITS-VLL 30.0 Profi
- Chassis no. (VIN): WMM00000D0057250
- Gross vehicle weight rating (GVWR): 48,000 kg
- Axle configuration: 3-axle
- Axle loads:
- Axle 1: 10,000 kg
- Axle 2: 10,000 kg
- Axle 3: 10,000 kg
- Permissible rolling load: 18,000 kg
- Loading platform: low-bed design
- Loading ramps: hydraulically operated
- Lower platform: hydraulically adjustable (up/down)
- Tyres: good condition
- Construction: all-steel chassis
- Maximum speed: 80 km/h
Specification & Options:
- Heavy-duty low-bed configuration
- Hydraulically adjustable lowered loading platform (up/down)
- Hydraulic rear loading ramps
- Wide (275 cm) and stable loading area
- Suitable for excavators, rollers, cranes, etc.
Robust construction, immediately operational
Condition:
The trailer is used but fully functional, with age- and use-related signs of wear. Technically a reliable and robust equipment transporter.
Immediately ready for use – ideal for transport and construction companies.
For more information or to arrange a viewing, please contact us.
= Further Information =
Axle configuration
- Rear axle 1: twin tyres; max. axle load: 10,000 kg; steered
- Rear axle 2: twin tyres; max. axle load: 10,000 kg; steered
- Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered
Weights
- Unladen weight: 14,500 kg
- Payload: 33,500 kg
- GVW: 48,000 kg
Maintenance, Inspection, and Condition
- Technical inspection (APK): valid until 02/2027
- Technical condition: very good
- Visual condition: very good
Financial information
- Price: On request
For further information, please contact Klaas Gerrits or Henk Gerrits.
Küçük ilan
Riederich
2.330 km
Frigofrik römork
MÜLLER-MITTELTAL2-Achs Tandemkühlanhänger 7 m LBW*THERMOKING
Çağrı
Koşul: ikinci el, azami yük ağırlığı: 4.960 kg, toplam ağırlık: 10.500 kg, ilk tescil: 04/1993, bir sonraki muayene (TÜV): 01/2026, yükleme alanı uzunluğu: 6.260 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 2.430 mm, yükleme alanı hacmi: 37 m³, Donanım: ABS, hidrolik arka platform, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift
* THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC
* Vehicle no. for customer inquiries: 4593
* Tail lift
* Air suspension
* EBS (Electronic Braking System)
* Anti-lock Braking System (ABS)
No liability for printing or typing errors
Sale exclusively to business customers
Subject to prior sale and errors. Changes, prior sale and errors expressly reserved. The description serves only as vehicle identification and does not constitute a warranty in the legal sense of a purchase. The description in the purchase contract is binding.
* TOP SERVICE + QUALITY
* We can provide a LEASING-FINANCING-HIRE PURCHASE offer
* Warranty insurance available on request from the insurer
* TÜV / UVV tail lift inspection / Tachograph testing and fitting of OBU unit by our local partners
* 30-day export license plates available
All export documents possible, but must be requested separately individually
Guodpfsykxfljx Acteb
* TOLL booking for Toll-Collect can be arranged in-house
* Free transfer from Stuttgart Airport or Metzingen train station (Württ)
* TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT.
* FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas
WHATSAPP Number * *
---- Visit us on our website at
* over 200 vehicles in stock at all times
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar
Çağrı
Koşul: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 flatbed:
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 9 t BPW Eco axles
* Air suspension with lifting and lowering system with RTR function
* 1st axle liftable
Gsdsr Dpzxspfx Actjub
* Last axle as self-steering trailing axle with electro-pneumatic steering lock via PIN reverse gear (lock of trailing axle from the tractor for maneuvering purposes – without any truck-side installation – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use in public road traffic)
* SmartBoard control box as an infotool with pressure sensors for total axle load display
* Tire pressure monitoring with in-cab display via EBS signal, without need for truck-side installation
* Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, adjustable height at head plate)
* Mechanical landing leg at the front, mechanical swing-down support legs at the rear of the chassis
* Hydraulic flow divider
* Continuous side walls (without center posts) up to the drive-on slope
* Folding rear stanchions
* Steel rear wall inserted in front of the rear stanchions
* Mechanically adjustable warning sign package at front and rear
* Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, mounted right side
* 15-pin power connector
* LED rear lights
* LED revolving beacon (removable), including bracket and installation
* 2 x LED reversing lights at the rear of the vehicle (activated via reverse gear)
* Flashing LED side marker lights
* 60 mm larch/Douglas fir timber flooring
* 400 mm steel front wall, plug-in
* Perforated outer frame, approx. 45 degrees bent, with fixture for fitting 3 t lashing brackets
* In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side
* In front and end crossmembers, various holes for 1.2 t lashing options
* Hydraulic, one-piece ramps approx. 3,000 x 720 mm, mechanically adjustable sideways
* 4-section hydraulic control block for possible later retrofit of hydraulic ramp displacement
* Chassis, drawbar, front wall, rear mechanical supports, and ramps hot-dip galvanized
* Axles, air tanks, flange towing eye, and front landing leg painted in black
* Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min to 120 l/min)
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALTridem, 7mtr., Nachlauf- Lenkachse, Liftbar,
Çağrı
Koşul: yeni, azami yük ağırlığı: 20.500 kg, toplam ağırlık: 27.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TR 27.0 Flatbed:
* EBS (electronic braking system)
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 3 x 9 t BPW Eco axles
* Air suspension with lift and lowering function featuring RTR function
* 1st axle liftable
* Last axle as a trailing steering axle with electro-pneumatic steering lock via reverse gear pin (trailing axle lock for shunting purposes from the towing vehicle side - without any vehicle-side installation - assigned to PIN 10 in the 15-pin connector, only for shunting, not for use on public roads)
* SmartBoard control unit as an info tool with pressure sensors for total axle load display
* Tire pressure monitoring with in-cab display possible via EBS signal without any vehicle-side installation
* Fixed central drawbar with 50 mm flanged towing eye (loaded height 900 mm, adjustable headplate height)
* Mechanical landing gear in front, mechanical swiveling supports at the rear of the chassis
* Mechanically adjustable warning signage package front and rear
* Toolboxes made of galvanized sheet steel – black powder coated – approx. 650 x 300 x 600 mm, located right side
Gsdpsr Dpz Aefx Acteub
* Hydraulic flow divider
* Continuous side walls (without central stanchion) up to the drive-on slope
* Rear stanchions foldable
* Steel rear wall inserted in front of the rear stanchions
* 15-pin electrical connector
* LED tail lights
* Removable LED beacon including holder and installation
* 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear)
* Flashing LED side marker lights
* 60 mm larch/Douglas fir wooden floor
* 400 mm steel front wall, slotted in
* Perforated external frame approx. 45° bent, equipped for the installation of 3 t lashing brackets
* One 10 t lashing ring in each corner; additionally, two 10 t and three 6.3 t lashing rings on each side
* Various drill holes in the front and rear cross members for 1.2 t lashing options
* Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways
* Four-way hydraulic valve block for possible retrofit of hydraulic ramp shifting
* Chassis, drawbar, front wall, mechanical rear support legs, loading ramps, tailgate hot-dip galvanized
* Axles, air tanks, flanged towing eye, and front landing gear painted in a black tone
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to 120 liters/min.)
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Tiefl., Luft., Schwarzdeckentransporte
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS-E (electronic braking system)
* TPM Tire Pressure Monitoring
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11-ton BPW Eco axles
* Air suspension with lifting and lowering system
Godjq Dyvcepfx Acteub
* SmartBoard as an information tool on the trailer, with pressure sensors for display of total axle load per axle group
* Lateral underrun protection
* Mechanically adjustable warning panel packages front and rear
* Front: closed plastic mudguards, Rear: straight galvanized steel skirts, each with spray guards
* Hinged (hot-dip galvanized) lid for the toolbox on the turntable platform
* Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted on the right side
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED rotating beacon at the rear
* Side marker lights with indicator control
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* Tire pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck)
* Rubber covering on folding ramps and on the entry slope left and right (approx. 860 mm long)
* Rubber covering on longitudinal beams from front to rear crossmember
* Hardwood flooring on running surfaces of the low-bed platform
* Four stake pockets on each side, with simultaneous 2-ton lashing capability per pocket
* Load securing package comprising: 5 pairs UVV lashing rings, swiveling and retractable, loadable from all directions and recessed in the external frame - in the corners 13.4 tons, otherwise 10 tons
* 6 pairs of mechanical folding outriggers for total width of 3 meters (not on the rear slope)
* Plank holders under the loading area, longitudinal alignment
* Raised roller stop in front of the front crossmember, with 1 x 6.4-ton lashing ring on each side
* Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves
* Hydraulic lateral ramp displacement
* Hydraulic rear support (single-stage cylinder)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 up to max. 140 l/min)
* Hydraulic control block, splash-proof
* Two-line hydraulic system
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm entry slope)
* Loaded platform height: approx. 890 mm +/- 20 mm (with air suspension)
* Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized
* Axles, turntable, drawbar, air tanks etc. painted in black
* Loaded platform height: approx. 890 mm +/- 20 mm
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 20/2026
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Tiefl., Luft., Schwarzdeckentransporte
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.400 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS-E (electronic braking system)
* TPMS (tire pressure monitoring system)
Guedpstplv Nsfx Actob
* Emergency release for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with lift and lower system
* SmartBoard as an info tool on the trailer with pressure sensors to display axle loads per axle group
* Side underrun protection
* Mechanically adjustable warning sign packages at front and rear
* Front axle fully enclosed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards
* Foldable (hot-dip galvanized) lid for the toolbox on the turntable platform
* Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated) mounted on the right side
* 15-pin power connector
* LED lighting 12/24 V
* Removable LED beacon at the rear
* Side marker lights with indicator activation
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation)
* Rubber covering on folding ramps and on the approach slope left and right (approx. 860 mm)
* Rubber covering on longitudinal beams from front bulkhead to rear cross member
* Hardwood flooring on the running surfaces of the low-bed platform
* Four stake pockets each side with integrated 2 t lashing points
* Load security package consisting of: 5 pairs of UVV lashing rings, swivel-mounted and retractable, loadable in all directions and embedded in the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers up to 3 m overall width (not on the rear slope)
* Plank holder under the loading area in longitudinal direction
* Raised roller stop in front of bulkhead with 1 x 6.4 t lashing ring each side
* Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves
* Hydraulic lateral ramp shift
* Rear support hydraulically operated (single-stage cylinder)
* Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 l/min up to max. 140 l/min)
* Hydraulic control block splash-proof
* Two-line hydraulic system
* Turntable area loading deck: approx. 1,960 x 2,520 mm
* Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope)
* Loaded loading height: approx. 890 mm +/- 20 mm air suspension
* Chassis, turntable, roller stop, folding extensions, and ramps hot-dip galvanized
* Axles, turntable, drawbar, air tank, etc. painted in a black tone
* Loaded loading height: approx. 890 mm +/- 20 mm
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from calendar week 20/2026
Küçük ilan
Egestorf
2.484 km
Çalışma platformlu römork
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Çağrı
Koşul: yeni, azami yük ağırlığı: 16.750 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering function
Gsdpfxjl Tihxs Actsub
* Fixture in front of the bulkhead and rear slant for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange tow eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21 ton GVW design with reinforced frame and reinforced axles
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture on the front bulkhead for optional retrofitting of container locks
* Bolted smooth steel sheet front wall
* Split, trapezoid-profiled steel side walls, foldable with middle drop-in stanchion
* Steel rear wall, can be inserted between the ramps – storage bracket inside the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 ton lashing capacity every 480 mm
* Option for installing 3 ton folding lashing brackets every 600 mm
* Profifix lashing rail centrally along vehicle axis for lashing up to LC 3000 daN
* In each corner front and rear: 1 x 10 ton lashing ring
* Lashing package with 2 x 8 ton retractable lashing rings per side in the outer frame, various drillings in the front and rear crossmember for 1.2 ton lashing options
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (collapsible down to 20 mm)
* Rear ramp angle approx. 860 mm chassis height
* Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black tone
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall paintwork in a RAL color of your choice (no special or metallic colors), changeable up to approx. 6 weeks before completion
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from week 29 / 2026
Güven mührü
TruckScout24 tarafından sertifikalandırılmış bayiler

Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height increases by +30 mm when lifted)
* Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads.
* Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as info tool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation)
* LED lighting system 12/24 V
* Removable LED beacon at the rear
----General Attachments:
* Mechanical warning sign package for 3 m total width
* Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side
* Front plastic mudguards and rear galvanized steel mudflaps
----Low Loader Deck:
* Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening)
* Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward
* Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform
* Bamboo wood between the longitudinal beams in front of the excavator stick recess
----Load Securing (LaSi package):
* 2 x 6.4 t lashing rings at the front corners
* 2 x 13.4 t UVV lashing points per side (front & rear corners)
* 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions)
* 4 stake pockets per side, also providing 2 t lashing capability each
* 1 x 16 t UVV lashing point on the rear traverse
----Widening:
* Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side)
----Excavator Stick Recess:
* Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Platform Dimensions:
* Load area above turntable: 2,600 + 390 x 2,520 mm
* Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope
----Paintwork:
* Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized
* Tow bar, axles, hydraulic axle supports, and air tanks painted in black
Gujdpel Tihuofx Actjb
----Notes:
* New vehicle with manufacturer’s warranty
* Subject to prior sale and errors
----Delivery Time:
Immediately available*
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Çağrı
Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (Electronic Braking System)
* Emergency release device for spring brake chambers
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm with axle lifted)
* Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads.
* Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as an infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required)
* LED lighting system 12/24 V
* Removable LED beacon at rear
----General Attachments:
* Mechanical warning sign kit for 3 m overall width
* Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side
* Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle
----Low Loader Platform:
* Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear)
* Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front
* Rubber coating on folding frame, approach slope, and running surface of low loader platform
* Bamboo timber between longitudinal beams in front of excavator stick rest
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing rings in the front corners
* 2 x 13.4 t UVV lashing points front and rear on each side
* 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions)
* 4 stake pockets per side, each with 2 t lashing option
* 1 x 16 t UVV lashing point at rear cross member
----Widening:
* Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side)
----Excavator Stick Rest:
* Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Deck Dimensions:
* Platform over turntable: 2,600 + 390 x 2,520 mm
* Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized
* Drawbar, axles, hydraulic axle supports and air tanks painted in black
----Information:
Gedsxptn Djpfx Acteub
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery Time:
Available immediately*
Küçük ilan
Egestorf
2.485 km
Çalışma platformlu römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage electrical system
* LED tail lights
* Removable beacon at the rear
* Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (stakes not included), with simultaneous lashing facility
Godpfox Ipa Nsx Actoub
* Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant)
* Widening planks stored at the center of the loading area
* Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest)
* Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp positioning
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, bogie, towing bar, and access ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* Dead weight 5,900 kg
* --Technically possible gross vehicle weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available from Egestorf
Küçük ilan
Egestorf
2.485 km
Alçak şasi römork
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Çağrı
Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0:
* EBS braking system
* TPMS tire pressure monitoring
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization (rear)
* Side underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection
* Reflective contour tape on sides and rear
* Folding lid (hot-dip galvanized) for toolbox on the bogie platform
* Multi-voltage system
* LED rear lights
* Detachable rotating beacon (rear)
* Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle
* 15-pin electrical connector
* 4 stake pockets per side (stakes not included) with integrated lashing points
* Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal)
* Widening planks stowed in the center of the loading area
* Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough)
* Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Load area above turntable: approx. 1,960 x 2,520 mm
* Unladen load height: approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Unladen load height: approx. 910 mm (incl. 860 mm approach angle)
* Chassis, bogie, towing bar, and ramps hot-dip galvanized
* Axles, springs, air reservoir, etc. painted in black shade
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* Technically permissible gross weight of 30,000 kg
* Vehicle is hot-dip galvanized
* Brand new vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Guodpsx Ipavofx Acteb
Sizin için aramayı kolaylaştırıyoruz: "müller-mitteltal ka-ta-r 11,9 rampen 3-s kipper verzinkt"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.










































































































































































































































































































































































































































































