Kullanılmış Wörmann Bauhl119.62/247 Rampen satın al (489)

Koşul: ikinci el, azami yük ağırlığı: 11.000 kg, toplam ağırlık: 11.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2013, yükleme alanı uzunluğu: 5.000 mm, Int.-No.: B - 08 Müşteri adına Obermeier * ECO Tip 100 * Üç taraflı damperli römork * 2 akslı * Geniş lastik * Ayarlanabilir çekme oku * Azami toplam ağırlık 11.000 kg * İyi durumda Takas mümkün %3,99'dan başlayan finansman seçenekleri Gedpfoxvf U Asx Actjit Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı değildir ve garanti edilmiş özellikler olarak kabul edilmez. Satıcı, yazım ve veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. Tüm bilgiler bağlayıcı değildir! Tüm Almanya'ya teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00, Cuma 09:00-14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 2.300 kg, toplam ağırlık: 3.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2015, İnt. No.: B - 06 Müşteri talimatıyla satılık Fliegl * TTS 30-30 Gsdpexvf U Njfx Actsit * Alçak şasi dorse * Rampa * 2 dingilli * Azami toplam ağırlık 3.000 kg * Çok iyi durumda, az kullanılmış Takas mümkün Finansman %3,99'dan başlayan oranlarla Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler taahhüt edici değildir ve garantili özellikler olarak kabul edilmemelidir. Satıcı, yazım ve veri iletim hatalarından sorumlu değildir. Belirtilen donanım ayrı olarak kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Talep üzerine Almanya genelinde teslimat mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00 - 17:00 Cuma 09:00 - 14:00 ve randevu ile!

Koşul: ikinci el, azami yük ağırlığı: 9.000 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2013, yükleme alanı uzunluğu: 6.000 mm, Int.-No.: B - 09 Gsdpjxvf Ucofx Actoit Müşteri adına Obermeier * Düşük yükleyici römork * 2 dingilli * Ayarlanabilir çekme kolu * Azami toplam ağırlık 11.900 kg * Durum, görsel olarak resimlerde görülebilir Takas mümkündür Finansman %3,99’dan başlayan oranlarla Hatalar ve ara satışlar saklıdır! Bu ilandaki bilgiler bağlayıcı değildir ve taahhüt edilmiş özellikler olarak kabul edilmez. Satıcı, yazım ve veri iletim hatalarından sorumlu değildir. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlandaki tüm bilgiler bağlayıcı değildir! Tüm Almanya'da teslimat talep üzerine mümkündür Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevuya göre!

Koşul: ikinci el, azami yük ağırlığı: 5.250 kg, toplam ağırlık: 5.250 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2018, yükleme alanı uzunluğu: 4.000 mm, Int.-Nr.: B - 10 Müşteri adına Blohmenröhr Gedpfx Acoxvf Szjteit * 3 yönlü damper * 2 dingilli * Rampa * Ayarlanabilir çekme kolu * Azami toplam ağırlık 5.250 kg * Yük kapasitesi yaklaşık 2.250 kg * Çok iyi durumda Takas mümkündür %3,99'dan başlayan finansman Hatalar ve ara satışlar saklıdır! Bu ilanda verilen bilgiler bağlayıcı olmayan tanımlamalardır ve garanti edilen özellikler değildir. Satıcı yazım ve veri aktarım hatalarından sorumlu değildir. Listelenen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir! Talep üzerine Almanya genelinde teslimat Çalışma saatleri: Pazartesi - Perşembe 09:00-17:00 Cuma 09:00-14:00 ve randevu ile!!!

Koşul: yeni, * AVAILABLE IMMEDIATELY * Includes tiltable loading platform / front and rear support stands / loading ramps Technical Data: • Brand: Martz • Model: SMART KARGO 235 • Vehicle type: box trailer • Condition: new vehicle • First registration: none • TÜV/roadworthiness certificate: 3 years from first registration • Interior dimensions (LxWxH): 223 x 147 x 146 cm • External dimensions (LxWxH): 340 x 190 x 196 cm • Permissible total weight: 750 kg • Unladen weight: 439 kg • Payload: 311 kg • Chassis: low-loader (wheels alongside the frame) • Tyres: 155/70R13 • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h homologation: Yes DESCRIPTION • Wooden floor and multiplex walls • Reinforced, stable bolted V-drawbar, foldable • Very stable welded steel frame • Frame fully hot-dip galvanized by immersion • 2x handy loading ramps, can be mounted and stowed on the inside of the door during transport • Continuous longitudinal beams • Frame is highly torsion-resistant due to stable construction • 4 recessed lashing rings in the floor • 2-wing rear door with lockable rotary bolt lock • 2x manoeuvring handles at the front • Maintenance-free KNOTT rubber suspension axle • 100 km/h manufacturer approval • 13-pin connector • Reverse light • Large, safety-rated lighting • Integrated rear fog lamp • Rear lighting recessed in frame • 2x rear support stands Giodpfx Asx Tiytsctot • 2x front support stands • Jockey wheel installed Optional Accessories (available upon request): • Motorcycle wheel chocks • Motorcycle lashing straps • Lashing straps • Additional lashing rings • Lashing rails on walls and floor for tension belts & cargo bars • Cargo bars • Interior lighting • Reverse light • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance; export license plates (Germany) can be provided if required - Export plates incl. customs declaration possible Descriptions and images are protected by copyright!! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you at our site! For over 30 years, we have been your specialist dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Subject to errors, changes, and prior sale -

Koşul: yeni, including ramp channel with ramps / enclosed loading platform with numerous lashing points / manual cable winch Technical Data: • Brand: Martz • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: not registered • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible gross weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: High loader (wheels underneath the body) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Phenolic plywood flooring, anti-slip and waterproof • incl. hand cable winch with brake • ramp storage compartment under the loading area • 2x steel ramps included • very robust welded steel frame • fully hot-dip galvanized frame (immersion bath) • 10x lashing eyes in the side frame profile (600 daN/kg) • side panels can be retrofitted anytime • auto-reverse system • KNOTT overrun coupling and parking brake • highly reinforced bolted V-drawbar Godpfxex S Rm So Acteit • 13-pin plug • reversing light • heavy-duty safety lighting • integrated rear fog light • recessed lighting in rear frame • LED outline marker lights, rear left and right • automatic jockey wheel installed Retrofittable accessories - inquiries welcome: • 100 km/h approval with shock absorbers • wheel chocks • side panels • anti-theft device • spare wheel • toolbox • reversing light • lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT. - Vehicle registration documents can be shipped in advance or export plates (Germany) can be provided. - Export plates incl. customs declaration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been specialist dealers and repair workshops for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands for over 30 years. - Subject to errors, changes and prior sale -

Koşul: ikinci el, ilk tescil: 08/1998, toplam uzunluk: 16.000 mm, toplam genişlik: 2.550 mm, Üretim yılı: 1998, GOLDHOFER STZ -TL 3 -33/80 3 dingilli alçaltılmış (kuğu boyunlu) semi treyler, 3 yönlendirilebilir dingil, alçaltılabilir platform ve hidrolik rampalı DORSE KUMLANMIŞ VE BOYANMIŞTIR!! • ABS • 3 x BPW ECO-Plus havalı süspansiyonlu dingil • 3 x yönlendirilebilir dingil • Kaldırma / indirme sistemi • Hidrolik, 2 parçalı yükleme rampası Gsdpfswpknwox Actoit • Hidrolik olarak alçaltılabilen platform • 3 m'ye kadar genişletilebilir • Uyarı levhaları • Elektrik/hidrolik pompa için NATO fişi • Toplam uzunluk: 16.000 mm • Boş ağırlık: 15.900 kg • Azami toplam ağırlık: 48.000 kg (teknik olarak mümkün olan 48.000 kg) • Taşıma kapasitesi: 32.100 kg • 4 x dingil yük göstergesi • Çift lastik: 235/75 R17,5 - TÜV / Araç muayenesi ve özel denetim: !! yeni !! - Alman aracı! Hatalar ve ara satış hakkı saklıdır!

Koşul: ikinci el, azami yük ağırlığı: 4.500 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/1979, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.900 mm, yükleme alanı yüksekliği: 380 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.000 mm, Üretim yılı: 1979,

Koşul: yeni, azami yük ağırlığı: 2.100 kg, toplam ağırlık: 3.000 kg, yükleme alanı uzunluğu: 3.100 mm, yükleme alanı genişliği: 1.760 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, Buy online and save at trailer-shop Many models available online at ANHÄNGERWIRTZ Convenient and round-the-clock shopping 24/7 online Pick up your trailer yourself or have it delivered. The online pick-up market for your new trailer features top brand manufacturers! Over 850 new trailers in stock Over 130 used trailers constantly on offer. Giedpfxsw H D Ixj Actjt Non-binding example: order and collect directly from our showroom Saris Tipper 3 SKS 310 176 40cm steel sides HD electric emergency pump aluminium ramps supports 3000kg 100km/h Three-way tipper heavy duty series, steel floor, 310x176x40cm, 3000kg tandem high loader chassis with shock absorbers, 100km/h rated, with V-drawbar, 40cm galvanized steel sides with lever fastener, drop tailgate, electrically operated tipping with emergency pump, 4 lashing brackets left and right, aluminium drive-on ramps 250cm with hook profile, telescopic rear supports, heavy duty automatic jockey wheel... only while stocks last! Invoice incl. VAT. Guarantee – trailer dealer for over 34 years Sales and telephone order acceptance at the following times: MON. – FRI. 08:00 – 12:30 & 14:00 – 18:00 or round the clock through our online shop at trailer-shop.com Colour and tail ramp may differ Copyright – trademark protection 08/25 Article No.: 99K3HDS0206

Koşul: ikinci el, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/1991, yükleme alanı uzunluğu: 8.200 mm, yükleme alanı genişliği: 2.500 mm, Donanım: ABS, * ABS Gedswdb Ttopfx Acteit * BPW axles ----Body: Low-bed trailer (2200 + 6000 mm), loading height approx. 900 mm, rear sloped, drive-on height approx. 750 mm, steel/wooden floor, extendable to 3 m, spring-assisted loading ramps, lashing rings. Sale exclusively to businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. Our General Terms and Conditions (see legal notice) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Koşul: ikinci el, azami yük ağırlığı: 24.640 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/1993, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.500 mm, ? Hidrolik destek ayakları ? Teker havuzları ? Her tarafta 3 yük direği yuvası ? Her tarafta 4 yük bağlama halkası ? Hidrolik rampalar ? Kampanalı fren Giodpfx Ajxuykijctot ? Havalı süspansiyon ? İkiz lastikler ? SAF akslar Tüm bilgiler taahhüt olmaksızın verilmiştir / Önceden satılma hakkı saklıdır.

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) Gsdpfx Asl Tlhroctoit * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower system and RtR valve * Pressure gauge scale for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight, galvanized steel sheet skirts with splash protection * Reflective contour tape on the sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12/24 V * Removable LED rotating beacon at the rear * 2 LED reversing lights (activated by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized, black powder-coated steel sheet, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOT-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye on left and right in front of the front wall support, 4 holes on each side of the turntable platform with 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the rear support, 4 pairs of UVV lashing rings (10 t) per side, pivoting and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing option * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not at the rear bevel) * Beam holder for extensions under the chassis on the left, longitudinally * Excavator arm holder above the rear axle up to the end beam, approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t lashing eyes per side in the excavator arm holder * Hardwood floor on the running surfaces of the low-loader platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) mechanically adjustable laterally * Outer beams of the loading ramps made of hardwood * Steel construction prepared for 6-control valve block * Loading edge unloaded approx. 950 mm +/- 20 mm chassis * Turntable, folding outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tank, drawbar painted in a black tone-- * Tyres 235/75 R 17.5 * Vehicle has a one-day registration in 07/2024 due to missing tire pressure monitoring system and was never loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering system, including RtR valve * Manometer pressure gauge for load weight determination (axles separated into two air suspension circuits) * Side underrun protection * Swing-out support legs at the rear of the chassis frame * Mechanically adjustable warning sign kits at front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel mud flaps with splash protection * Reflective contour tape on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (activated via reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of the turntable platform, approx. 490 mm long with 45° corners Gsdpfx Ael Tnu Aectsit * Robot-welded anti-slip covering on the steel plate of the turntable platform * Load securing package consisting of: in front of the bulkhead carrier left & right each 1 x 13.4 t UVV lashing ring, on each side 4 holes in the turntable platform with 2 t lashing force each, 1 pair of lashing rings (13.4 t) suspended at the rear left & right in front of the rear cross member, on each side 4 pairs of swiveling and lowerable UVV lashing rings (10 t), loadable in all directions and recessed in the outer frame, on each side 3 stake pockets with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out extensions for 3 m overall width (not in the rear slope area) * Plank holder for extensions under the chassis left, longitudinal orientation * Excavator stick rest, from rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, on each side 2 pairs of 6.4 t lashing rings in the excavator stick rest * Hardwood flooring on the running surfaces of the low loader platform * Hydraulically operated single-piece loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * Outer planks of the loading ramps made of hardwood * Steel structure pre-manufactured for 6-way control valve * Loading edge height unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out extensions, mechanical supports, loading ramps all hot-dip galvanized * --Axles, air tanks, drawbar painted in black-- * Tyres: 235/75 R 17.5 * The vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 2.000 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 08/2016, bir sonraki muayene (TÜV): 11/2025, Üretim yılı: 2016, Donanım: ABS, SARIS TRAILER WITH 2-AXLE LOW LOADER AND RAMP, MOT 11/2025 ----VEHICLE EQUIPMENT * TYPE: C2C * 2 AXLES * DRUM BRAKES * ADJUSTABLE RAMP * IDEALLY SUITED FOR MINI-EXCAVATORS, FORKLIFTS, ETC. * 4 M LONG * GROSS VEHICLE WEIGHT: 3,500 KG * UNLADEN WEIGHT: 1,500 KG * PAYLOAD: 2,000 KG * TIRE SIZE: 185 / 70 R13 * MOT: 11 / 2025 * EXPORT SALE ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS PLATES AND 17 - 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500 / €1,000 will be charged. Changes, errors, and prior sale reserved! More vehicles can be found on our homepage. Sales only in accordance with our terms and conditions – see homepage. Important note – Important information: Despite careful review of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of various platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. The details provided here are without guarantee and do not represent warranted characteristics. Gsdpfxjuidc Ro Acteit

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes Gjdpfx Acjrczm Dsteit * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour marking tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connector lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed single mudguard at the front (plastic) * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm forwards * Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable * Chassis made of high-strength fine-grained steel * Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored sideways left in storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring system with cab display option via EBS signal – no installation required on the truck side * Warning sign package front & rear * Reflective contour tape, side and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additional 12 V – 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and basket-type spare wheel holder, right side * Closed single plastic mudguard front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Extended offset by 500 mm to the front * Extended turntable platform at the front by 520 mm with 45° corners and three recessed storage compartments incl. lid, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, low-bed platform floor made of 60 mm softwood * Outer planks of ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes supplied), each with 2 t lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; one pair of 13.4 t lashing rings at the front and rear outer frames; four pairs of 10 t swivel and retractable lashing rings per side, loadable in all directions and integrated into the outer frame; two pairs of 6.4 t lashing rings on the side in the excavator stick rest; eight pairs of galvanized folding outriggers for 3 m overall width (not on rear incline) * Widening planks stored left side in storage compartment * Excavator stick rest over rear axle to end of rear incline, approx. 2,300 x 740 x 190 mm Gedel Th Evjpfx Acteit * Mechanical rear support legs * Hydraulic, hot-dip galvanized ramps, approx. 3,000 x 720 mm * Hydraulic side ramp displacement on guide tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Laden loading height approx. 860 mm (incl. 860 mm rear incline) * Chassis, turntable, ramps, and rear mechanical support legs hot-dip galvanized * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 21 / 2026

Koşul: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, vites türü: otomatik, dingil konfigürasyonu: 3 aks, toplam ağırlık: 32.000 kg, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, emisyon sınıfı: Euro 6, renk: beyaz, Üretim yılı: 2026, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machine transporter / work platform transporter FH 500 8x2R Gisdpfx Acow Itmrotot - Trailing axle, electro-hydraulically steered, single wheels - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - Safety long-distance driver's cab FH - Cab parking heater, 2 kW - 33 l cool box with freezer compartment under the bunk - Air suspension on front axle(s) - Gearbox / I-Shift controls via driver's seat control unit - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco-cruise control (cruise control), including brake cruise control - Manual shifting in automatic mode possible (including kickdown) - Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking function - Lane keeping assistant - Side collision avoidance system and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for work platform and construction machine transport with hydraulic access ramps With 2 pairs of wheel recesses including covers Body dimensions: - Length approx. 9,050 mm usable length - Outer width 2,550 mm - Loading height from top of floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, high-volume design - Short crossmember spacing for high point loads - Rear end angled for low ramp angle - Outer frame profile 90° - Front wall in reinforced design - Storage box inside below the front wall - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet toolboxes and exterior frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams each with Multi-X contour along entire length with numerous lashing points, 2.5 t - 4 lashing eyes 8 t recessed at rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front of front wall (left/right/center/center) - Outer frame profile 90° Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/stretch ramps, both ramps are laterally adjustable - Ramp can be used as a loading ramp as well as a drive-through ramp for warehouse equipment (stretch section remains closed), fixed ramp part is placed onto the hall ramp - Sturdy tension bar as transport lock (optionally with strap tensioning) - 2 hydraulic rear supports with pads and warning sound & indicator in cab - Ramp and support operation via electro-hydraulics - Control via radio remote as well as emergency control at the control block - Control block installed in stainless steel toolbox on frame side - Superwinch 8.2 t with steel cable approx. 20 m - Entry handles right and left for access to the loading area - 5 stainless steel drawer-type toolboxes, incl. lighting (optional, extra charge) - Side panelling per sample pictures (green vehicle) optional, extra charge - KTL coating for superstructure - Ball-type trailer coupling at rear, 3.3 t - 4 LED work lights - 2 LED tail lights mounted at top of front wall - 4 LED work lights on outside of frame as ambient lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is supplied with cab in white and body in nova grey. (Painting of outer frame in RAL color as requested is possible)

Koşul: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machine transporter / aerial work platform transporter Model: FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - High-roof sleeper cab FH for long-distance safety - Cab parking heater, 2 kW - 33 l refrigerator with freezer compartment, mounted under bunk - Air suspension on front axle(s) - Gearbox / I-Shift operation via control unit at driver's seat - I-Shift drive modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco-Cruise Control (cruise control), including brake cruise - Manual shifting possible in automatic mode (incl. kickdown); Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency brake function - Lane Keeping Assist - Side Collision Avoidance and Turn Assist (both sides) - Driver alert system for fatigue warning - VEB Volvo Engine Brake - etc. WIESE superstructure for aerial platform and construction machinery transport with hydraulic loading ramps With 2 pairs of wheel recesses incl. wheel recess covers Superstructure dimensions: - Length: usable approx. 9,050 mm - Outer width: 2,550 mm - Loading height (top edge floor): approx. 1,050 mm unladen - Robust, weight-optimized welded steel construction, box-type design - Short crossmember spacing for high point loads - Tapered rear for low ramp angle - Outer frame profile 90° - Frontwall in reinforced version - Storage box inside, below frontwall - Grating floor - Suitable for 5,000 daN wheel load - Steel sheet boxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame - Longitudinal beams with Multi-X contour along the entire length, with numerous lashing points rated up to 2.5 t - 4 x lashing eyes 8 t, recessed at rear (left/right/center/center) - 4 x lashing eyes 8 t, recessed in frontwall (left/right/center/center) - Outer frame profile 90° Loading Ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width: 850 mm per ramp - Ramp design as 2 single/drive-over ramps, both laterally adjustable - Ramps can be used as access ramps or drive-over ramps for warehouse operations (drive-over section remains closed); fixed ramp section can be placed onto loading bay - Sturdy tension bar for transport safety (optionally with belt tension) - 2 hydraulic rear supports with plates, audible warning, and cab indicator lamp - Ramp and support operated via electro-hydraulics Godpfow Itl Ujx Acteit - Controls via radio remote and emergency operation at control block - Control block mounted in stainless-steel storage box, side of frame - Superwinch 8.2 t with approx. 20 m steel cable - Access with handles right and left for loading area inspection - 5 stainless steel drawer-type storage boxes, incl. lighting optional at extra cost - Side paneling as per example photos (green vehicle), available as an option at extra cost - KTL coating for superstructure - Trailer coupling with ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high on frontwall - 4 LED work lights mounted outside on frame for area illumination - 2 LED work lights at the rear - 1 removable beacon at the rear The stock vehicle comes with a white cab and novagrau superstructure (external frame color in RAL as requested).

Koşul: yeni, kilometre: 100 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 32.000 kg, dingil konfigürasyonu: 3 aks, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 9.000 mm, yükleme alanı genişliği: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, klima, navigasyon sistemi, park ısıtıcısı, 4-axle Volvo machinery transporter / aerial work platform transporter ? FH 500 8x2R ? Trailing axle, electro-hydraulically steered, single tires ? Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ? Safety long-distance cab FH ? Cab auxiliary heater, 2 kW ? 33 L cool box with freezer compartment, under the bunk ? Air suspension on front axle(s) ? Transmission / I-Shift operation via driver's seat control unit ? I-Shift driving modes: Standard, Performance, and Economy ? I-See with map-based topography and traffic information ? Eco cruise control (cruise control), including brake cruise control ? Manual shifting possible in automatic mode (including kickdown) ? Adaptive traction control ? Adaptive cruise control (ACC) with collision warning and emergency braking ? Lane keeping assist ? Side collision avoidance and turn assist (both sides) ? Driver alert system (fatigue warning) * VEB Volvo Engine Brake * etc. WIESE superstructure for aerial platform and construction machinery transport, with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Superstructure dimensions: - Length usable approx. 9,050 mm - External width 2,550 mm - Loading height upper edge of floor approx. 1,050 mm unladen - Sturdy, weight-optimized steel welded construction, box-type design - Short crossmember distances for high point loads - Sloped rear for low drive-up angle - Outer frame profile 90° - Bulkhead reinforced version - Storage box inside, below, in front of the bulkhead - Grating floor - Design suitable for 5,000 daN wheel load - Above the axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with Multi-X contour along the entire length, numerous lashing points 2.5 t - 4 lashing eyes 8 t recessed at the rear (left/right/center/center) - 4 lashing eyes 8 t recessed in front of the bulkhead (left/right/center/center) Giedpfxow Itmle Actst - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 individual, sliding ramps; both ramps are laterally adjustable - Ramp can be used as a drive-up ramp or as a crossover ramp for warehouse equipment (extension part remains closed), the fixed ramp part is placed onto the building ramp - Sturdy tension bar for transport locking (alternative with strap tension) - 2 hydraulic rear supports with pads, including warning tone and indicator light in the cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency controls on the control block - Control block mounted in stainless steel storage box on the frame side - Superwinch 8.2 t winch with approx. 20 m steel cable - Access to load area via steps with handrails right and left - 5 stainless steel storage boxes in pull-out design, incl. lighting as option for an extra charge - Side paneling see example images (green vehicle) as option for an extra charge - KTL coating of superstructure - Ball head trailer coupling at the rear, 3.3 t - 4 LED work lights - 2 LED tail lights mounted high on the bulkhead - 4 exterior-frame LED work lights as area illumination - 2 LED work lights at the rear - 1 revolving beacon at the rear, removable The stock vehicle is supplied with cab in white and superstructure in novagrau; (external frame pain

Koşul: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Gijdeya E A Nepfx Actjt Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning boards, approx. 423 x 423 mm

Koşul: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck: Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4 and 8x4 Loading Platform: Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10° A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Godpfx Acsmfqi Istjit Two-part Steel Ramps: One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide Hardwood covering Hydraulically folding ramp tips Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward Braking System: WABCO EBS-E brake system in compliance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface Treatment: Entire steel structure shot-blasted automatically after welding using a blast wheel Second blasting with corundum for optimal coating adhesion Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax Rims in silver grey Steel Structure: Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC, S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection strip for supply lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, then every approx. 400 mm One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area Gooseneck guide plate for the saddle plate, approx. 500 mm wide Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform 1 sliding intermediate table for the telescopic tube with large cross-section Operating valves for hydraulic ramps on right side of vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring

Koşul: yeni, boş ağırlık: 757 kg, azami yük ağırlığı: 2.743 kg, toplam ağırlık: 3.500 kg, yükleme alanı uzunluğu: 3.300 mm, yükleme alanı genişliği: 1.800 mm, yükleme alanı yüksekliği: 300 mm, 3.30 m x 1.80 m x 0.30 m 3500 kg gross weight, 757 kg unladen weight, 2743 kg payload capacity Commercial jockey wheel Ramps & supports Gjdpfewwv Tzjx Acteit

Koşul: yeni, boş ağırlık: 1.020 kg, azami yük ağırlığı: 2.480 kg, toplam ağırlık: 3.500 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 406 mm, yükleme alanı genişliği: 200 mm, yükleme alanı yüksekliği: 30 mm, EDUARD 3-way tipper 406x200x30 cm, 3500 kg, electric & manual pump, incl. ramps & supports, 4020-4-3O3-3563-P Gsdpfxewwv Avo Actoit

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: Giodpfel Thyxsx Actot * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7