İkinci El Fliegl Vts 400 4-Achs Tieflader Parabel Hydraulik Satın Al (42.389)

Durum: ikinci el, azami yük ağırlığı: 31.700 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 08/2022, yükleme alanı uzunluğu: 7.920 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 11.940 mm, toplam genişlik: 2.520 mm, Toplam ağırlık: 24.000 kg / 40.000 kg Boş ağırlık: 8.300 kg Yük kapasitesi: 15.700 kg / 31.700 kg Toplam uzunluk: 11.940 mm Yükleme uzunluğu: Toplam yaklaşık 7.920 mm Genişlik: 2.520 mm Yükleme yüksekliği: 900 mm Diğer bilgiler - Galvanizli - Paralel yaylı süspansiyon - Hidrolik rampalar, çelik, ahşap kaplama, yana doğru hareket ettirilebilir - Alet kutusu - Geniş sabitleme seti - Ön ve arka uyarı levhaları - Plastik alet kutusu - Katlanabilir arka destek - Kazıcı kolu boşluğu, arka akslardan başlayarak arka kısma kadar, yaklaşık Ibedpfx Ajz Am U Djdqeb 1.800 mm x 650 mm, yaklaşık 150 mm derinlik - 3 m genişletme - Yükleme alanının altında ahşap levhalarla donatılmış saklama bölmesi

Durum: yeni, azami yük ağırlığı: 31.100 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,900 kg Payload: 15,100 kg / 31,100 kg Total length: 11,940 mm Loading length: 10,410 mm total, 2,490 mm gooseneck, 7,920 mm loading platform including rear bevel Width: 2,520 mm Loading height: 900 mm Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 / net Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holder Aluminium side underrun protection Rear mud flap across entire width (not available with forklift holder) Half-shell mudguards 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps before and after 3rd and 4th axle Digger boom recess over rear axles extending to rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep 2 pairs of lashing holes, each 5 t, in the digger boom recess at the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm 1 storage box recessed into the floor of the gooseneck with lid, W=720 mm/ L=520 mm / D=170 mm Extendable widening to 3,000 mm (not on rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden boards under the lowbed surface 70 mm wooden boards for widening to 3,000 mm Low loader lashing points 1 pair of lashing cut-outs recessed in main longitudinal beam at the front on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame, each with 5 t (for tensioning strap hooks) 9 pairs of lashing mushrooms on top and side of the outer frame, each 10 t 2 x at the front on the gooseneck 7 x in the lowbed first lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 additional pairs of folding lashing points, each 10 t 1 x on the gooseneck (protrudes) 1 x beginning of the lowbed recessed into longitudinal beams 1 x behind the last axle recessed in the floor Drawbar coupling turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axles/chassis laser-aligned" – reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation front and rear (rocker compensation) Wheels and tyres 235/75 R 17.5" as per manufacturer’s choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connection hoses to towing vehicle, 24 volt ABS and ALB, with ABS connector at front, with connecting cable Ibedperducpefx Adqsb Note: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! Electrics 12-24 volt, multi-chamber LED rear lights, side yellow LED lights, number plate lighting in LED (Note: certain towing vehicles may show malfunction warnings despite functioning) 2 white front position lights in LED 2 white/red rear marker lights in LED 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/checker plate surface, then approx. 70 mm softwood floor, in w

Durum: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Total weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Overall length: 11,940mm Loading length: approx. 10,410mm total, gooseneck approx. 2,490mm, loading platform including rear incline approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information Plus pre-shipping / handling from stock location 26639 Wiesmoor: €1,280.00 net Hire purchase offer: Term 48 months, down payment only VAT, residual value 40% Monthly rate EUR 759.00 Chassis, Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for axles 1 and 2 with anti-splash mudflaps behind each axle, Anti-splash mudflaps before and after axles 3 and 4 Excavator arm recess over rear axles extending to rear, approx. 1,800mm long, approx. 650mm wide and approx. 150mm deep 2 pairs of lashing holes rated to 5t each, in the excavator arm recess on the side of the longitudinal frame approx. 300mm from the front and approx. 200mm before rear incline 1 lockable plastic toolbox, w=600 / h=425 / d=460mm Recessed storage box in the gooseneck with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not in the rear incline) (Note: track width of machines or vehicles to be transported must not exceed external frame width of 2,550mm) Storage compartment for timber planks under the low-bed area 70mm timber planks for widening to 3,000mm Low loader lashing points 1 pair of lashing recesses in the front longitudinal member within the gooseneck, each rated to 10t 4 pairs of lashing holes on the outer frame, rated to 5t each (for securing straps) 9 pairs of recessed lashing mushrooms (above and side of outer frame), each rated to 10t 2 x at the front on the gooseneck 7 x on the low-bed deck First lashing point 250mm from the front and last max. 250mm from the rear, distance between lashing points max. 1,100mm 3 additional pairs of folding lashing points, each rated to 10t 1 x on the gooseneck (protruding) 1 x at the start of the low-bed deck, recessed inside the longitudinal beams 1 x recessed in the floor behind the last axle Drawbar assembly, turntable trailer Drawbar with certified 50mm towing eye Drawbar height adjustment via spring Axles and Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tire wear and fuel consumption Air suspension with raise & lower valve + auto-reset function Wheels & tyres 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Ijdpfx Adovv D Ixoqebb Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be appropriately pre-equipped, not installed in this trailer; not a calibrated scale) Vehicle stability control system 2 fail-safe coupling heads at the front, with connecting lines to tractor unit, 12-24 Volt EBS, electronic braking system with EBS plug at the front, including connection cable Knorr make Note: This trailer may only be towed by vehicles that guarantee effective ABS operation! Electrical system 12-24 Volt, multi-chamber LED lights, side yellow LED lighting, LED number plate lighting, (Note: Certain tractor units may show fault codes even though functionality is correct) 2 white front position lights, LED 2 red/white lane marker ligh

Durum: yeni, azami yük ağırlığı: 31.920 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 10.410 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New Fliegl 4-axle low loader trailer with ramps, model VTS 400 Gross vehicle weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm, gooseneck approx. 2,490 mm, loading platform incl. rear bevel approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information Plus delivery / provision from stock location 26639 Wiesmoor: €1,280.00 net Chassis – Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-race ring Folding rear supports 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mud flap Half shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles extending to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing points, each rated at 5 t, in the excavator arm recess on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w = 600 mm / h = 425 mm / d = 460 mm, lockable Storage box recessed in the gooseneck floor with lid, W = 720 mm / L = 520 mm / D = 170 mm Extendable width to 3,000 mm (not in rear bevel area) (Track width of transported construction machines or vehicles must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low loader deck 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, each rated at 10 t Iodpsxrx Nlefx Adqsbb 4 pairs of lashing holes in the outer frame, each rated at 5 t (for ratchet strap attachment) 9 pairs of lashing mushrooms recessed on top and side of the outer frame, each rated at 10 t - 2 at the front on the gooseneck - 7 in the low-bed section First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not more than 1,100 mm 3 pairs of additional folding lashing eyes, each rated at 10 t - 1 on the gooseneck (protruding) - 1 at the beginning of the low-bed section recessed in the inner longitudinal beams - 1 behind the last axle recessed in the floor Towing gear for turntable trailer Drawbar with certified 50 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and tyres 235 / 75 R 17.5” – manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS-CAN bus signal for cockpit display (truck must be appropriately equipped, not truck-installed, not a calibrated scale) Vehicle stability control system 2 non-interchangeable coupling heads at the front with connecting lines to the towing vehicle 12-24 volt EBS (Electronic Braking System), plug at the front, with connecting cable (Knorr brand) Note: The trailer may only be towed by vehicles which ensure full ABS functionality! Electrics 12-24 volt, multi-chamber LED lights, side LED marker lights, LED number plate light (Note: On certain towing vehicles, incorrect diagnostics may occur, despite functional lighting) 2 white LED position lights at the front 2 white/red LED lane departure lights at the rear 2 x 7-pin non-interchangeab

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT44001000966, boş ağırlık: 9.400 kg, azami yük ağırlığı: 30.600 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 10/2010, yükleme alanı uzunluğu: 7.145 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 12.120 mm, toplam genişlik: 27.500 mm, toplam yükseklik: 900 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17,5", renk: kırmızı, The images are archive photos! Permissible / technical total weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Maximum overall width: 2,750 mm Gooseneck length approx.: 2,850 mm Low bed platform length in the drive-aisle area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed, laden, approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis – Low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium 1 plastic toolbox Extendable side extensions to 3,250 mm (not on the rear bevel) (Track width of the construction machinery or vehicles to be transported must not exceed external frame width of 2,750 mm) Storage compartment for timber planks at the center of the loading area 70 mm timber planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, recessed in the longitudinal beams of the floor Lashing rings low-loader: 2 pairs of lashing rings on the gooseneck, each 5t 1 pair of lashing rings in the rear bevel 4 lashing rings recessed centrally in the floor 2 pairs of keyhole profiles in the drive aisle for inserting longitudinal guide rails and for load securing 6 pairs of lashing mushrooms embedded in the low bed external frame, each 10t 5 pairs of stake pockets embedded in the low bed external frame 4 additional pairs of 10t lashing rings: Ibodpfxsyxq A Ho Adqob 1x on the gooseneck 3x recessed in the low bed floor Drawbar and towing equipment: Turntable-type trailer drawbar with certified 50 mm towing eye Axles + Suspension: Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker balancing) Wheels and tyres: 235 / 75 R 17.5" Steel twin wheels, factory silver Brake system: 2-line compressed air braking system Spring-actuated parking brake 2 unmistakable coupling heads at front with connecting lines to towing vehicle ABS and ALB, with ABS plug at the front, with connection cable Note: This trailer may only be towed by vehicles that ensure ABS functionality! Floor: Front gooseneck with steel / chequer plate covering then 70 mm softwood flooring, steel / chequer plate in the wheel arch area Rear bevel with 70 mm softwood flooring Loading ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, wood-covered Hydraulically operated via tractor PTO Operational notes: An exemption permit is required for 10,000 kg axle load, only indivisible loads permitted!!! Note! Excessive length and width require a permanent special permit. When applying for an exemption in regulated heavy transport, axle load monitoring is mandatory for air-suspended vehicles!!! This applies to all deviations from § 34 German Road Traffic Licensing Regulations (StVZO) (axle and permissible total weight exceedance) requiring a § 70 exception permit. The specified total weight is technically feasible; however, depending on the cargo, the total weight may not be reached while observing permissible axle/support/king pin loads. (Poor driving and tracking characteristics may occur with improper load distribution) The images are archive photos!

Durum: yeni, azami yük ağırlığı: 30.010 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 10.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, New vehicle: Fliegl 4-axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: 48-month term, down payment only VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Load length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, loading deck including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information: Chassis: Low loader trailer Steel welded construction Turntable with heavy-duty ball race Rear support foldable Wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st & 2nd axle with anti-spray flaps behind each axle, anti-spray flaps behind the 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes, each rated 5 t, in the excavator arm recess at approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel holder for 1 spare wheel, mounted vertically on the front center of the gooseneck. Spare wheel manufacturer as base tires, steel rim Storage box sunken into the floor of the gooseneck with cover, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel recesses behind gooseneck, fitted in low-bed lane area, ramped entrance, bottom length approx. 1,600 mm, approx. 400 mm deep. Note: Main frame is 400 mm higher than wheel recess in this area. 2nd pair of wheel recesses between axles, fitted in low-bed lane area, ramped entrance, bottom length approx. 600 mm, approx. 300 mm deep. Note: Main frame is 300 mm higher than wheel recess in this area. Extendable width up to 3,000 mm (extension not available at the rear bevel or inside wheel recesses). (Track width of machines/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for timbers under the low bed deck 70 mm timbers for extension to 3,000 mm Ijdpfxotrizke Adqjbb Lashing points low loader: 1 pair of recessed ring lashing points at front of gooseneck, each 5 t 4 pairs of lashing holes in external frame, each 5 t (for hook-in ratchet straps) 8 pairs of welded-on lashing mushrooms, top and sides of the external frame, each 10 t 2x at front on gooseneck 6x in the low bed First lashing point 250 mm from the front, last max. 250 mm from rear; distance between lashing points not greater than 1,100 mm 5 pairs of stanchion pockets recessed in the external frame, internal 70 x 40 mm (can be converted to 5 t ring lashing points, not included) 1 pair of additional folding lashing points recessed in the floor, each 10 t 1x inside next to main frame at start of low bed 2 pairs of additional folding lashing points, each 10 t 1x on gooseneck (protrudes) 1x recessed in floor behind rearmost axle Drawbar coupling for turntable trailer: Drawbar with tested 50 mm coupling eye, coupling eye angled at 8° D-value min. 160 kN Axles + Suspension: BPW drum brake axles Laser-aligned axles/chassis; reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at front (rocker compensation) Wheels and tires: 235/75 R 17.5" Manufacturer’s choice, with M+S marking Steel rims in twin-wheel configuration, factory silver Braking system: 2-line compressed air brake system Spring-loa

Durum: yeni, azami yük ağırlığı: 30.310 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Load bed: 7,150 mm including 850 mm drive-up slope Loading height: 900 mm 1st pair of wheel recesses after drop in the load bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, beacon, Comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator boom recess 1,800 mm long, 150 mm deep Ibodjnzlg Dspfx Adqsb Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic lateral shifting Hire-purchase offer: 48-month term, residual value 40%, down payment only VAT on the rental instalments, monthly instalment EUR 970.00 net Vehicle available from 11/09/2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Other 3-, 4- and 5-axle low loaders new and used available immediately.

Durum: yeni, azami yük ağırlığı: 18.400 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 5.900 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear taper Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision from stock at 26639 Wiesmoor, €1,280.00 / net Low-bed trailer chassis Steel welded construction Turntable with heavy-duty ball race Foldable rear support 2 wheel chocks with holders Full-width rear mudflap (not with forklift mounting) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with cover, not in rear taper) Lashing points low-loader: 1 pair tiedown recesses in the longitudinal beam, front, recessed in the cranking, each 10t 7 pairs of lashing mushroom points, fitted on top and side of the outer frame, each 10t: 1x front on cranking 5x in the lowered bed 1x in rear taper 12 pairs of lashing holes in the outer frame, each 5t (for ratchet strap hooks): 5x cranking, 6x lowered bed, 1x rear taper Drawbar arrangement for turntable trailer: Drawbar with certified 40mm towing eye Drawbar height adjustable via spring Axles and suspension: Drum brake axles, manufacturer’s choice Laser-aligned axle/chassis: reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensator) Wheels and tyres: 235/75 R17.5” (manufacturer’s choice) Ibsdpfjynvrwsx Adqob Steel twin rims, factory silver Braking system: 2-line air brake system Spring-loaded parking brake 2 fail-safe coupling heads at front, with connecting lines to the truck, connecting lines approx. 60cm extended without ABS, with mechanical ALB, thus max. 60 km/h approval Electrics: 12 volt, multi-chamber lights, without side yellow LED lighting, with side reflectors 2 white position lights front 2 white/red contour marker lights rear 1x 7-pin 12V plug at front, with connecting cable, approx. 60cm extended 1 LED beacon with bracket, controlled via sidelight (removable) 2 pairs of illuminated warning boards, extendable to 3,000mm Floor: Front cranking with steel/chequer plate covering Storage box recessed in the transition to cranking Then approx. 70mm softwood floor, over wheel arches with steel/chequer plate covering Rear taper with 70mm softwood floor Low-bed area incl. rear taper 5900mm Access ramps: Steel ramps approx. 3000mm long, 750mm wide, laterally adjustable Wooden planked (tip area with steel/chequer plate) Hydraulic via tractor auxiliary drive with throttle, operated on LH side Hydraulic connection with SVK plug NW 10/3, including hose Operating instructions: With 10,000kg axle load, special permit required; only indivisible load possible! The stated gross vehicle weight is technically feasible; depending on the load, the GVW may not be achievable due to permitted axle/support/saddle loads. (Poor driving and tracking behaviour may result from incorrect load distribution) Country of registration / Plates: Country of registration: Germany With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (Registration in Switzerland max. 40 km/h possible) Prepared for two-line registration plate holder Without contour markings / reflective strips according to ECE R 048 Paint finish: Frame hot-dip galvanised incl. passivation “15-year warranty against thr

Durum: ikinci el, ilk tescil: 06/2018, Üretim yılı: 2018, Fliegl ZWP 180 ZWP 2 Akslı Römork ∗SIFIR GİBİ∗ ! 4 adet mevcuttur ! ● İlk kayıt tarihi: 06/2018 ● Araç boyutları: 9.150 mm x 2.480 mm (U x G) ● Tamamen hava süspansiyonlu ● Kaldırma/Eğme sistemi ● ABS ● 2 x hava süspansiyonlu BPW – 9 tonluk akslar ● Toplam ağırlık: 18.000 kg ● Boş ağırlık: 2.610 kg ● Yük kapasitesi: 15.390 kg ● Ön/Arka lastikler: 385/65 R22.5 ● Lastik diş derinliği: 8/8 / 7/7 mm Isdpozlwpdofx Adqobb - Alman üretimi araç! - İlk sahibi! - Muayene / Periyodik bakım: istek üzerine ve ek ücret karşılığında yeni! Hatalar ve önceden satış saklıdır! = Ek bilgiler = Boş ağırlık: 2.610 kg Yükleme kapasitesi: 15.390 kg Toplam ağırlık: 18.000 kg

Durum: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, ilk tescil: 03/2026, lastik durumu: 100 yüzde, Üretim yılı: 2025, Römork neredeyse yeni gibi. Hidrolik rampalar, mekanik olarak hareket ettirilebilir. Tekerlek yuvaları. Iedjzrb Idepfx Adqobb

Durum: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Yanlarda dikme cepleri Iedsy Ercbspfx Adqebb Takma dikmeler için depo kutusu

Durum: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area Iedpout Idnsfx Adqobb 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Durum: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks Iodpfx Aowmpbdsdqobb - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Durum: yeni, boş ağırlık: 9.550 kg, azami yük ağırlığı: 30.450 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Air suspension with lift and lower function, axle load scales, total loading length approx. 9,100 mm, low-bed approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings (each for 10 t), 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, loading ramps adjustable sideways, wooden floor 68 mm thick, storage box with lid for lashing chains or straps, contour marking as per regulations, warning beacon, spring-loaded parking brake, including axle load indicators, chassis hot-dip galvanized, Surcharge for: hydraulic ramp shifting = Price: 1,000 € -- Subject to typesetting, typographical and prior sale errors; sample images -- Iodpfjz Dhv Nsx Adqebb For more data/info, see: !, More details: !

Durum: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Iodpsz Dhwmsfx Adqebb Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- More data at: ! More details: !

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, Gross vehicle weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm, gooseneck 2,170mm, loading deck 6,500mm Width: 2,520mm Loading height: 860mm Additional information plus pre-carriage / delivery ex-stock 26639 Wiesmoor €1,280.00 net Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball race Rear supports foldable 2 wheel chocks with holders Aluminium side impact protection Full-width rear spray flap (not in conjunction with forklift bracket) Quarter shell mudguards in front of 1st axle Anti-spray mud flaps behind 2nd and 3rd axle Isdpfx Aswlmr Redqobb 1 lockable plastic toolbox, w=600mm / h=425mm / d=460mm Extendable outriggers for widening to 3,000mm (not in rear bevel) (Track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550mm) Timber storage compartment centrally located on the loading area 70mm timber planks for extension to 3,000mm Lashing eyes low loader 1 pair of front lashing recesses in main beam at gooseneck, each 10t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5t (for attaching ratchet straps) 7 pairs of lashing points (studs) inset at top and side of outer frame, each 10t 1x at front on gooseneck 6x in well deck First lashing eye 250mm from front, last max. 250mm from rear, distance between lashing eyes max. 1,100mm 5 pairs of recessed ring lashing eyes in outer frame, each 5t (convertible to stake pockets) 2 pairs of additional folding lashing eyes, each 10t 1x on gooseneck (protruding) 1x recessed in floor behind last axle Towing gear Turntable trailer Drawbar with certified 40mm towing eye Drawbar height adjustment by spring Axles and suspension BPW drum braked axles "Chassis/axle alignment with laser" to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (walking beam equalizer) Wheels and tyres 235/75 R 17.5" Manufacturer's choice Steel rims twin configuration, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 fail-safe couplings at front, connection lines to tractor unit 24V ABS and ALB, ABS socket at front, with connection cable Note: This trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 2x 7-pin fail-safe plugs at front, with connecting cable 1 LED beacon with bracket, controlled via sidelights (beacon removable) 2 pairs of warning panels, each LED illuminated and extendable to 3,000mm Floor Gooseneck clad with steel/chequer plate Storage box inset in transition to gooseneck Subsequent area fitted with approx. 70mm softwood floor, in wheel arch areas with steel/chequer plate Rear incline with 70mm softwood flooring Lowbed area incl. rear incline 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, laterally adjustable Additional lower ramp locks folding (to prevent lateral slipping of ramps, not in conjunction with hydraulic side ramp shift) Planked with timber (ends with steel/chequer plates) With spring assist Operating instructions For a 10,000kg axle load, a special permit is required, only indivisible loads permitted! For application of a sp...

Durum: ikinci el, boş ağırlık: 15.900 kg, azami yük ağırlığı: 48.100 kg, toplam ağırlık: 62.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 01/2023, süspansiyon: hava, lastik boyutu: 235/75R17,5, Donanım: ABS, | BODEX Düşük Platformlu Römork | Tekerlek yuvaları | Son 2 aksında yönlendirilebilir bağlantı | 1 aksı kaldırılabilir | Maksimum 6 metreye kadar uzatılabilir | Yükleme alanının uzunluğu 13200 mm | SAF akslar, tamburlu fren sistemi | Kendi ağırlığı: 15900 kg | Toplam ağırlık: 62000 kg | 245/70R17,5 çift lastik | Hidrolik rampalar, ağır hizmet tipi, 3800 mm uzunluğunda ve 800 mm genişliğinde. Iodpfxezzdfke Adqjbb

Durum: ikinci el, ilk tescil: 04/2016, Üretim yılı: 2016, MEUSBURGER - Perdeler / Kuğu Boynu - Makine Taşımacılığı için Özel Yarı Römork Isdpfezy Adpjx Adqjbb 5 metreye kadar hidrolik olarak genişletilebilir!! 3,5 metre iç yüksekliğe kadar mümkündür!! • Üretim Yılı: 2016 • Yarı römork, 5 metreye kadar elektro-pnömatik olarak genişletilebilir • Araç hidroliğine gerek yoktur - Araçta elektro-pnömatik bir pompa bulunur! • İç yüksekliği: 3.250 mm (3.730 mm'ye kadar mümkündür!) • Dış boyutlar: 13.810 x 2.550 x 4.000 mm • İç boyutlar: 13.480 (Kuğu boynu 3.480 mm + Alçak platform 10.000 mm) x 2.490 x 3.250 mm • EDSCHA branda • Elektrikli/hidrolik açılır tavan • Eloksallı/galvanizli çerçeve! • Kaydırılabilir kızaklar • 2 x Yanlarda sabitleme rayı • 2 x Ortada sabitleme rayı • 2 x 9 adet katlanabilir sabitleme halkası (yanlarda, alçak platformda) • 2 x 4 adet sabitleme halkası (kuğu boynunda) • 4 x Çift lastikli ve hava süspansiyonlu BPW - ECO PLUS akslar • Elektrikli tek izli direksiyon • Disk frenler • ALU jantlar • 1. aks kaldırılabilir • 3. + 4. aks yönlendirilebilir - sürtünmeli mafsallı! • Lastik ölçüsü: 205/65 R 17.5 • Lastik diş derinlikleri (aksa göre): 10/10/11/10; 10/7/11/10; 6/6/10/11; 9/10/8/7 mm • BEKA - Merkezi yağlama sistemi • Azami toplam ağırlık: 38.800 kg • Boş ağırlık: 11.250 kg • 42.000 kg taşıma kapasitesi - Alman yapımı yarı römork! - BAKIM DEFTERİNE KAYITLI: Tüm periyodik bakım ve onarımlar yetkili serviste yapılmıştır!! - İlk sahibi! - İsteğe bağlı olarak ve ek ücret karşılığında TÜV/ARAÇ MUAYENESİ yeni! Hatalar ve ön satışlar mahfuzdur! = Ek Bilgiler = Boş ağırlık: 11.250 kg

Durum: yeni, boş ağırlık: 10.500 kg, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, 2 adet kapaklı tekerlek yuvası, ABS, hava süspansiyonlu (yükseltme ve alçaltma özellikli), toplam yük alanı uzunluğu yaklaşık: 10.250 mm, düşük platform yaklaşık: 7.150 mm uzunluğunda, yüklü durumdaki yükseklik yaklaşık: 890 mm, 24 x 10 ton kapasiteli bağlama halkası, 40 x 3 ton kapasiteli bağlama halkası, yükleme rampaları (yaklaşık 3.100 x 760 mm), rampaların ve arka eğimin dış tarafında tırmanma çıtası, yana doğru ayarlanabilir yükleme rampaları, 68 mm kalınlığında ahşap zemin, bağlama zincirleri veya gergi bantları için kapaklı saklama kutusu, yönetmeliğe uygun kontur işaretlemesi, döner lamba, yaylı akümülatörlü park freni, aks yükü göstergesi dahil, araç daldırma banyosu ile sıcak daldırma galvaniz kaplama, ek ücret karşılığında: rampaların hidrolik olarak hareket ettirilmesi = fiyat: 1.000 €, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler, daha fazla bilgi için: ! Ijdpfx Adsz A Uyxjqebb

Durum: ikinci el, kilometre: 343.870 km, güç: 257 kW (349,42 bg), ilk tescil: 02/2006, yakıt türü: dizel, boş ağırlık: 11.200 kg, azami yük ağırlığı: 14.800 kg, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.500 mm, frenler: sabit gaz kelebeği, renk: turuncu, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: Euro 4, süspansiyon: çelik-hava, koltuk sayısı: 2, ön lastik ölçüsü: 385/65R22.5, arka lastik boyutu: 315/80R22.5, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, ek farlar, hidrolik direksiyon, hız sabitleyici, kabin, klima, koltuk ısıtıcı, merkezi kilitleme, sisal lambaları, tır çekici bağlantısı, çekiş kontrolü, Vehicle location: Bovenden, main depot, 2x comfort seats, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO (power take-off), AS-Tronic automatic transmission, central lubrication system, differential lock, work lights, rotating beacon, leaf and air suspension, last axle liftable and steerable, trailer coupling with air and electrical connections, low-noise G1, underride protection, side aluminium guard, hydraulic transverse locking, roof hatch, space for crane behind the cab, green environmental sticker. Wheelbase: 4,500 mm. Bodywork: Palfinger Palift T18 hooklift system for containers up to 6.5 m, roller height approximately 1,290 mm. EURO 4 emission standard. Disc brakes (3 axles). Leaf suspension: 1st axle / air suspension: 2nd+3rd axle. Analogue tachograph, turn assist (Preco PreView Side Defender II), air conditioning. Ibodpfx Adovhixmsqjb The engine power can be increased to 400 HP! Spare wheel available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Durum: ikinci el, azami yük ağırlığı: 31.400 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 10/2011, bir sonraki muayene (TÜV): 09/2026, yükleme alanı uzunluğu: 9.750 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 11.750 mm, toplam genişlik: 2.500 mm, Araç Numarası: 26885 Araç Tipi / Üst Yapı: Düşük Yataklı Dorse İlk Kayıt: 10/11 Periyodik Muayene: 09/26 Toplam Ağırlık: 24.000 kg / 40.000 kg Boş Ağırlık: 8.600 kg Yük Kapasitesi: 15.400 kg / 31.400 kg Toplam Uzunluk: 11.750 mm Yükleme Uzunluğu: Toplam yaklaşık 9.750 mm / yaklaşık 7.350 mm, arka çıkıntı dahil düşük yatak Genişlik: 2.500 mm - 3.000 mm Ijdpezz Ezmsfx Adqsbb Yükseklik: 900 mm Diğer Bilgiler: - Galvanizli - Döner çekme çubuğu 40/50 - 3 m genişletme - Hidrolik rampalar - Yanlara doğru kaydırılabilir rampalar - Hidrolik destek ayakları (arka) - Rampalarda ve arka kısımda tırmanma çıtaları - Paralel yaylı süspansiyon - Çift lastikli - Ön ve arka uyarı levhaları - Depolama bölmesi (kavisli) - Geniş emniyet kemeri seti - Destek çubukları için cepler - Kazıcı kolu çukuru - Elektrikli tekerlek - LED geri vites farları - Döner lamba

Durum: yeni, boş ağırlık: 9.150 kg, azami yük ağırlığı: 30.850 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.100 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, ABS, air suspension with lifting and lowering function, axle load scales, total loading area length approx. 9,100 mm, low-bed section approx. 6,900 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable loading ramps, 68 mm thick timber floor, storage box with lid for lashing chains or tension belts, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, chassis completely hot-dip galvanized, subject to errors, misprints and changes, sample pictures—, More data at: !, More details: ! Ibsdjz A Uyrjpfx Adqob

Durum: ikinci el, Üretim yılı: 1986, çalışma saatleri: 6.400 h, Talep üzerine lütfen referans numarasını belirtin: 24445 Genel Bilgiler: Üretim Yılı: Yaklaşık 1986 Marka ve Model: Mitsubishi SM120-8 Çalışma Saati: Yaklaşık 6.400 Ağırlık: Yaklaşık 12.000 kg Bilgiler: Palet sistemi (resimlere bakın) Palet genişliği: Yaklaşık 70 cm Toplam genişlik: Yaklaşık 270 cm Donanım: 2 adet derin kazma kovası Dar derin kazma kovası Greifer, ek ücrete tabi olarak temin edilebilir. Açıklama: Sadece 6.400 çalışma saatine sahip Mitsubishi SM120 paletli ekskavatör. Ekskavatörün sadece bir sahibi olmuştur ve satın alındığından beri plastik atıkların temizlenmesi için kullanılmıştır. Sahibinin belirttiğine göre, ekskavatör kusursuz bir şekilde çalışmaktadır. Şu anda monte edilmiş olan greifer, ek ücrete tabi olarak birlikte verilebilir. Hemen teslim edilebilir. Isdpfxoz A Rhfj Adqjbb Çalışma saati: 6400 Kendi ağırlığı: 12000 Genişlik: 270 Model: SM120-8 Kazıcı - 3 kova - 6400 saat. = Ek Bilgiler = Seri numarası: Seri No: xxxx Daha fazla bilgi için ATS Norway ile iletişime geçin.

Durum: ikinci el, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: > 3 aks, ilk tescil: 12/2010, bir sonraki muayene (TÜV): 11/2025, * SAF akslar Ibjdevav U Sopfx Adqjb * Tekerlek yuvaları * 4. aks * Hidrolik yükleme rampaları * 50 mm çekme çubuğu * Boş ağırlık: 9.650 kg * İzin verilen toplam ağırlık: 24.000 kg * TÜV: 11.2025 * SP: 05.2025 -----İç araç numarası: 10093----Hatalar ve önceden satış mahfuzdur. WhatsApp üzerinden destek mevcuttur! Araçla ilgili sorularınız veya daha fazla bilgi için lütfen WhatsApp üzerinden bize kolayca ulaşın. WhatsApp WhatsApp

Durum: yeni, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: > 3 aks, yükleme alanı uzunluğu: 9.350 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Flatbed, ABS, air suspension with lift and lower functions, axle load scales, overall platform length approx. 9,350 mm, 32 lashing rings, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing strip on the outside of ramps and rear slope, laterally adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, contour marking as per regulations, rotating beacon, spring-loaded parking brake, incl. axle load indicators, vehicle fully hot-dip galvanized, Surcharge for: hydraulic ramp adjustment = Price: 1,000 €, -- subject to errors, omissions, and modifications, sample images --, More data available at: !, More details: ! Ibsdoz A Uzcjpfx Adqsb