Kullanılmış Müller-Mitteltal 3-Achs Mit Radmulden, 2 Ladehöhen, Klapprampen satın al (61.155)

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes Iedpjq Euaksfx Ad Reba ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis Isdeykx Nkjpfx Ad Roba * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Durum: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer Iedpfjykx Nqjx Ad Roba ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durum: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: Ibjdpfxstpta Dj Ad Rja * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking system: * Wabco ABS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Drawbar adjustable in height by approx. 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * JOST mechanical landing gear at front * Rear: 2 mechanical folding supports Isdpol Th Htefx Ad Rsba * Plastic toolbox approx. 650 x 350 x 320 mm mounted front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at the central locking locations and 2 on the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * Steel pallet 3-way tipper body with continuous side walls reinforced on top with inner tubing – without central stanchions, foldable with drop side spring assist * Removable bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be pivoted and locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate when tipping backwards with the wing doors open * 4 mm steel floor plate made of fine-grain steel * Mounting rail at rear for loading ramps ----Load securing: * 1 x 5 t lashing ring in each corner and 4 x 3 t recessed lashing eyes per side in the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for ramps integrated underneath cargo area in the chassis, accessible from the rear ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports galvanised * Axles, springs, air tank and landing gear painted in a shade of black * Sideboards painted RAL 9010 pure white * Other RAL colours for the sidewalls available at additional cost ----Information: * Reinforced body with load securing certificate * Vehicle has a one-day registration (not in use) * Subject to prior sale and errors excepted ----Delivery time: * Immediately available ex Egestorf

Durum: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar, approx. 300 mm, with 40 mm flange draw eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right front side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Net hooks positioned at the central locking latches and 2 hooks on the front wall Ibedpfsl Th Duex Ad Rja ----Chassis: * Chassis made from fine grain steel ----Tipping Platform: * Steel pallet tri-side tipper body with continuous side walls and internal tube reinforcement—without central stanchions, folding with drop side spring assist * Rear stanchions bolted * Combination steel swing doors at the rear, asymmetric 2-leaf design—swivels and lockable up to 270°, not foldable—with additional pendulum frame for automatic rear door opening during tipping, locking via galvanized rotary bolt lock and central locking, deactivation function for automatic rear door when tipping backwards with swing door open * 4 mm fine-grain steel floor plate * Rear ramp holder rails ----Load Securing: * One 5 t lash ring in each corner, plus four 3 t lashing eyes per side recessed in the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated under the platform at the rear of the chassis for the ramps ----Tyres: * Tyres: 285/70 R19.5 ----Coating: * Chassis, drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing leg painted in a black shade * Sideboard coating in RAL 9010 pure white * Side wall coating in other RAL colors available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle has a day registration (unused) * Subject to prior sale and errors excepted ----Delivery Time: Immediately available ex Egestorf

Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Ibsdpfxozr Uihj Ad Roa

Durum: ikinci el, boş ağırlık: 7.340 kg, azami yük ağırlığı: 22.660 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2012, yükleme alanı uzunluğu: 9.200 mm, süspansiyon: çelik, lastik boyutu: 235/75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75 R 17,5, arka lastik boyutu: 235/75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Yükleme alanı uzunluğu yaklaşık 9.200 mm, yükseklik yaklaşık 900 mm, 16 adet bağlama halkası, araç sipariş üzerine satılmaktadır, baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek resimler. Daha fazla bilgi için: !, More Details: ! Isdpfx Ajzrhqlod Rsba

Durum: ikinci el, ilk tescil: 10/2014, toplam ağırlık: 27.000 kg, boş ağırlık: 5.100 kg, renk: gri, vites türü: diğer, emisyon sınıfı: hiçbiri, Üretim yılı: 2014, azami yük ağırlığı: 21.900 kg, bir sonraki muayene (TÜV): 03/2027, süspansiyon: çelik, lastik boyutu: 265/70 R19.5, ön lastik ölçüsü: 265/70 R19.5, arka lastik boyutu: 265/70 R19.5, şoför kabini: diğer, Donanım: ABS, aydınlatma, basınçlı hava freni, ek farlar, elektronik denge programı (ESP), kamyon kaydı, sisal lambaları, şasi, Müller Mitteltal 3-axle trailer for skip containers TM 2 24.0 * Suitable for 2x 12 m³ containers/skips Iedpfszbbbdex Ad Rsba * Lowerable pneumatic drawbar for front loading * Adjustable stop point for container mounting * Manual lashing with ratchets * Sealed floor * BPW axles * Leaf suspension * Galvanised frame/chassis * Drum brakes * Wear plates * Additional auxiliary lights * 7 lashing rings per side, mounted externally * Large toolbox * Weights: GVW – 27,000 kg, Tare – 5,170 kg, Payload – 21,830 kg * German vehicle with German documentation! * 1st owner! * First registration: 21.10.2014 * Vehicle inspection (TÜV) valid until 03/2027 * Safety inspection (SP) valid until 09/2026 * VIN: WMM00000E0058208 Subject to prior sale, errors, and changes! Some company logos have been removed from the images – please ask if needed! No guarantee for the functionality of extra features! Your contact: Christoph Ott Tel. & WhatsApp:

Durum: ikinci el, azami yük ağırlığı: 38.230 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2026, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Müller-Mitteltal alçak yataklı römork, tekerlek yuvalı, TS 3 RM ML 30,0, 2 yükseklikte ve rampalı * Dingil yükü kapasitesi 12 t'den 18 t'ye yükseltildi (dahil). King pin, ikinci king pin pozisyonuna (2") monte edildi; king pin, maksimum 2.750 mm eğime kadar. Arka dönüş yarıçapı yaklaşık 2.400 mm (önerilen boşluk en az 150 mm). Ön dönüş yarıçapı 1.480 mm veya yedek tekerlekle birlikte 1.570 mm. Not: Çekiciye yeterli boşluğun sağlanması müşterinin sorumluluğundadır. * Ön ve arka taraftaki tekerlek yuvalarının alt kısmında (205 mm derinliğinde) açılır parçalar. 6 adet, tekerlek yuvalarının arkasına yerleştirilecek destek tabloları dahil. Destek tabloları tutucuları, 09.112 koduna göre yuva şeklinde. Çelik yerine alüminyum basınçlı hava tankı. * Akıllı kontrol paneli, römork üzerine monte edilmiş, basınç sensörleri içeren bilgi aracı olarak kullanılmakta ve yalnızca toplam dingil yükünü göstermek için tasarlanmıştır. Gösterim, kontrol paneli üzerinden veya kamyondaki EBS hava süspansiyon sistemi üzerinden (kamyon üreticisine bağlı olarak) seçilebilir şekilde yapılabilir. * ?SP Kombi Paketi: Galvanizli çelik sacdan yapılmış, 45° açılı köşelere sahip alet kutusu, RAL 9006 beyaz alüminyum renginde elektrostatik boya ile kaplanmış, dingil platformu üzerine monte edilmiş, üstte menteşeli kapaklı, yan kapıları ve eğimli köşeleri olan, B=2.480 x Y=500 mm boyutlarında. Dingil platformuna katlanabilen alüminyum yan duvarlar (500 mm yüksekliğinde), takılabilir alüminyum arka duvar (150 mm yüksekliğinde), iç ve dış yüzeyleri RAL 9006 beyaz alüminyum renginde boyanmış alüminyum kenar panelleri dahil. Katlanabilir ve çıkarılabilir arka destekler, galvanizli (üst kaplama yok). Vidalı ön yapı dahil. Ön destek kirişinin uzunluğu eğim noktasına kadar 3.935 mm. Ön dönüş yarıçapı, yedek tekerlek olmadan, 2.450 mm veya 2.750 mm eğim ölçüsünde yaklaşık 1.750 mm veya yaklaşık 1.480 mm. * Ön destek kirişinde gömülü olarak monte edilmiş 2 adet konteyner kilitleme mekanizması. * Dingil platformunun altında, seçilebilen alüminyum rampalar veya tekerlek yuvalarını kapatmak için kullanılacak ahşap tabloların saklanması için 3 adet yuva. * Katlanabilir/uzatılabilir destek (galvanizli) ve yükün genişliğini artırmak için ahşap tablolar dahil (arka eğimde değil). Destek tabloları tutucuları dingil platformu üzerinde (yükün genişliği maksimum 2.500 mm olabilir). * Uyarı paketiyle birlikte kullanılan ikinci LED konum lambası, ön ve arka tarafta (çift aydınlatma). * Römorkun arka tarafında, geri vitesle birlikte çalışan 2 adet LED geri marcha lambası (12 V ve 24 V için uygun), maksimum 2 adet ek olarak takılabilir. * Arka tarafta 7 kutuplu priz, geri marcha lambası (58 R) ve şasi bağlantısı için kablolanmış, uzun aşırı boyutlu yükler için aydınlatma. * Sol ve sağ taraftaki rampa üzerinde kauçuk kaplama (yaklaşık 860 mm uzunluğunda), 190 07644 kauçuk şerit, tek parça rampanın iç tablasında. * Tam otomatik merkezi yağlama sistemi, pompa (24V), yağ deposu ve entegre römork kontrol ünitesi ile birlikte (rampaların bağlantısı hariç). (Direksiyonda: dingil platformunun dağıtım ünitesinin bağlantısı dahil). Not: Yalnızca 24V aydınlatma sistemine sahip çekici araçlarda kullanılabilir! Ön satış ve hatalar saklıdır! Ibodpfx Adey R Ipuj Rsa Satış yalnızca genel satış koşullarımıza tabidir. Önemli Not: Teklifimizdeki tüm ayrıntıların dikkatlice incelenmesine rağmen, hataların meydana gelmesi mümkündür. Bu hataların bir kısmı, çeşitli platform sağlayıcılarının sistemlerindeki aktarım hatalarından

Durum: ikinci el, boş ağırlık: 5.750 kg, azami yük ağırlığı: 24.250 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/1993, süspansiyon: çelik, lastik boyutu: 235/75R17,5 141/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 141/140J, arka lastik boyutu: 235/75R17,5 141/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni,  ,  Müşteri aracı, , --  Baskı hataları, yanlışlıklar ve değişiklikler saklıdır, örnek görseller --, Daha fazla bilgi için: !, Daha fazla detay: ! Ibodpfx Aszr Sgksd Rja

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum mounts ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrical / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no installation required on truck side) * 15-pin electrical connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation pattern for load securing devices, lashing capacity per tie-down point 2,000 kg at a spacing of 480 mm * Option to install 3,000 kg drop-in lashing brackets at approx. 600 mm intervals – delivery includes 12 pieces of 3,000 kg lashing brackets per side * 5 pockets per side for pipe stakes, 100 x 50 mm, integrated in the outer frame (stakes not included in delivery) * 30 mm phenolic plywood floor ----Cable Drum Mounts: * 3 galvanized cable drum mounts, secured by container lockings with side forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width max. 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per mount: 6,000 kg * Without drive and drum brake * Support arm with tension latch for drum shaft securing * Steel drum shaft, 76 mm diameter with centering and rotatable ends * 2 spacer rings * 2 polyamide centering cones Ijdpfx Adjx Nli Ne Roba * 4 pieces of 3.2 t lashing eyes on support arms for customer’s own securing of the drum against rotation and unspooling ----Loading Height: * Loaded approx. 1,040 mm ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in a black tone ----Info: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 51 / 2026

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) Ibjdpsy Ngzyefx Ad Rsa * Smartboard control box mounted on the trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under chassis, right side ----Low Loader Platform: * Fifth wheel platform, front corners chamfered at 45°, with front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminium side walls (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * 150 mm high rear wall slotted in place * Rear chamfer on the fifth wheel platform to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm timber floorboards and low-bed platform with 60 mm timber floorboards * Checkered plate over the axles ----Widenings: * 8 x mechanical fold-out widenings to 3 meter overall width (except on the rear chamfer) (widening planks available, stored on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and three 5 t lashing bars on the outer frame * On the low-bed platform, each side 2 x 13.4 t lashing rings and 4 x 10 t swivel and lowerable lashing rings recessed into the outer frame * Each side 2 x 6.4 t lashing points and 1 lashing ring in the excavator stick recess at the rear * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Recess: * Excavator stick recess runs continuously from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer-side retrofitting of hydraulic ramp shifting * The outer board on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on bevel * Rubber on the ramp and drive-on bevel ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity over 40 l to 120 l/min) ----Loading Dimensions: * Fifth wheel loading platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm drive-on bevel) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Painting/Finish: * Chassis, ramps, rear folding supports, widening brackets hot-dip galvanized * Axles, support winches, air tanks painted in black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offering ----Delivery time: * available from c

Durum: yeni, azami yük ağırlığı: 38.290 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General attachments: * Side underrun protection * Landing legs at the front as well as mechanical swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low loader platform: * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high foldable and removable aluminum side boards (RAL 9010 pure white) on the saddle platform * Rear wall -150 mm- inserted * Rear slope on the saddle platform to the low-bed, approx. 700 mm long * Saddle platform with 50 mm wooden floor boards and low-bed platform with 60 mm wooden floor boards Isdpoy Ngz Hefx Ad Reba * Chequer plate over the axles ----Extensions: * 8 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lashing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side in the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, as well as 4 x 10 t lashing rings swiveling and retractable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side as well as 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck bend on the low-bed platform ----Excavator arm trough: * Excavator arm trough, continuous from the end of the last rigid axle through the steering axle up to the end crossmember, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading ramps: * Mechanically operated single-piece hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank on the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the approach slope * Rubber on the ramp and the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output from over 40 l/min up to 120 l/min) ----Loading dimensions: * Load area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension consoles are hot-dip galvanized * Axles, landing legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample pictures may contain equipment

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 Cable Drums (Cable Reel Mounts) ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with raise/lower control ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm towing eye ----Electrics / Lighting: Ibsdox Nlkaepfx Ad Rea * Tire pressure monitoring with display capability on the truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * "Zurr-fix" outer frame, 45° bent, with drilled hole pattern for lashing points, lashing capacity per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg folding lashing rings at approx. 600 mm spacing – 12 pcs 3,000 kg lashing rings included per side * 5 pockets per side for stake tubes 100 x 50 mm in the outer frame – stakes themselves not included in delivery * 30 mm phenolic resin-coated plywood floor ----Cable Drum Mounts (Drum Supports): * 3 galvanized cable drum mounts secured by container locks with lateral forklift pockets, center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbar * 6,000 kg drum weight per cable drum mount * Without drive system and drum brake * Support arm with clamping latch to secure drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 clamping rings * 2 centering cones made from polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided securing against drum rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Durum: yeni, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.230 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift/lowering device ----Tow Bar: * Tow bar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck cockpit via EBS signal (no installation required on truck side) * 15-pin power plug * 2 additional LED reversing lights (activated by reverse gear) * LED lighting Ibjdpox Nlkgofx Ad Roa ----General Attachments: * Aluminum air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Lateral underrun protection * Plastic quarter fenders * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° bent, with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm spacing * Option for 3,000 kg lashing rings at approximately 600 mm intervals – 12 units of 3,000 kg lashing rings included per side * 5 pockets per side in the outer frame for pipe stakes 100 x 50 mm (stakes not included) * 30 mm phenolic resin plywood flooring ----Drum Supports: * 3 galvanized drum supports secured by container locks with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm, maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm with cross-connection * Load capacity per cable drum support 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 units 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Loaded approx. 1,040 mm ----Coating: * Chassis, turntable, tow bar, outer frame, underrun guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical uprating to 30 t GVW possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 51 / 2026

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assistance for maneuvering purposes on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and lifting of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension during tipping (can be deactivated via control element in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange eye: * Drawbar with adjustable K80 ball coupling ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: * Support winch at the front * Bolt-on steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable protective grille for rear lights (not permitted under road traffic regulations – must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Three-way steel tipper body (fixed front wall, continuous side walls without central posts, right side wall swinging on central locking and foldable with sideboard spring raising, left side wall foldable with sideboard hydraulics, tailgate swinging with automatic hook locking) * 5mm steel floor made of HARDOX-450 or equivalent ----Load securing: * 4 x 3 t UVV lashing rings recessed in the outer frame on each side ----Paintwork: * Axles, air tank, support winch, flange eye painted in black tone * Tipping body painted in RAL color of choice (no special or metallic coatings), changes possible up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: Iodpfxjy Tr Hij Ad Roba * The vehicle is still under construction and will be completed in week 44 / 2026, assuming uninterrupted and continuous production.

Durum: yeni, azami yük ağırlığı: 16.500 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 1.000 mm, Üretim yılı: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering on the 1st axle (activated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (can be deactivated by a control element in the driver’s cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders Iedpfx Asy Tr Hcsd Rsba * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED rear lights 12 / 24V with galvanized protective housing ----Drawbar / Flange Tow Eye: * Drawbar with K80 ball coupling, adjustable mm (dimensions not specified) ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded with elevated support for connection lines ----General Attachments: * Landing leg at the front * Bolted steel underrun protection * Plastic quarter mudguards before the first and after the last axle * Removable tail light guards (not permitted under StVZO and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipping Platform: * 3-way steel tipper body (fixed front wall, continuous side walls—without intermediate posts—right side wall swinging via central locking as well as folding down with drop-side spring lifter) * Left side wall foldable with drop-side hydromat * Tailgate swinging via automatic hook lock * 5mm steel floor made of HARDOX-450 or equivalent ----Load Securing: * 4 x 3 ton UVV lashing rings recessed on each side in the outer frame ----Painting: * Axles, air tanks, landing leg, flange tow eye painted in black * Tipping body painted in one RAL color of your choice (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grilles for rear lights, hot-dip galvanized ----Notes: * Sample images ----Delivery Time: * The vehicle is still under construction and, barring any disruptions or changes in production, will be completed in calendar week 44 / 2026

Durum: yeni, boş ağırlık: 8.490 kg, azami yük ağırlığı: 40.510 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.490 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame drop and level loading area, rear taper approx. 500x100 mm - Neck height 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed on the outside as a perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at the center of gravity - Prepared for extendable load width extensions - With excavator recess (open type), depth approx. 220 mm, width approx. 600 mm, beginning just after 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-leg stabilizers at rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tires: - BPW air suspension axles, each with 10 t axle load, air bellow diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering mechanism, total travel approx. 200 mm - 2nd ride height setting via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via pushbutton on trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot blasting, chassis spray galvanizing and priming - Painting of chassis/hub/outer frame in DB 7350 Novagrau Accessories: - Removable drop sides and tailboard on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Metal mudguards with Clear-Pass - Long number plate holder integrated in end plate - 1 removable ECE plate at rear - 11 pairs of ZK-modules 10t side-mounted: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lamps each, at the front at landing gear and rear before end plate, infinitely extendable to a loading width of 4,500 mm - 4 holders for warning signs, insertable in stake pockets on loading area - 6 pairs of side stake pockets for insertable stanchions 100x50 mm - 2 cross rows of stake pockets for insertable stanchions 100x50 mm on gooseneck, from outer frame to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for insertable stanchions 100x50 mm on loading area, from outer frame to main frame (1x at the front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection Ibodpjwu A Slofx Ad Rsa - Preparation (wiring for NATO cable and hole pattern for retrofit installation of NATO socket at front of end plate and bracket on vehicle) for subsequent installation of an electrohydraulic unit on the right rear side for possible ramp operation - Mechanical landing legs 24t, single-sided operation with load compensation Optionally, the trailer is available with aluminum approach ramp

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Ibedpfxezrhlis Ad Rsa

Durum: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2010, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17,5, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235 / 75 R 17,5, arka lastik boyutu: 235 / 75 R 17,5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, yakıt: biyodizel, Donanım: ABS, basınçlı hava freni, Vehicle is being sold on behalf of a customer. Some wooden planks are damaged. 17 pairs of lashing rings. Loading height approx. 900 mm. -- Typographical errors, mistakes and alterations reserved, sample images -- More data at: !, More Details: ! Isdpfx Adjzqfr Dj Roba

Durum: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 Ibedewmpbdopfx Ad Rea - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead Ibedpfx Adjykx I Ho Roa ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function Ibodeykx I Topfx Ad Rja ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, Üretim yılı: 2026, RA-T 18,0: Önden ve arkadan yüklenebilir ----Fren: * Wabco EBS-E (elektronik fren sistemi) * Yaylı akümülatör silindirleri için acil serbest bırakma mekanizması * 19,5" disk frenler * Enine bağlantı üniteleri açıldığında otomatik frenleme ----Akslar: * 2 x 10 ton BPW geniş izli akslar ----Süspansiyon: * Hava süspansiyonu (fren serbest bırakıldığında otomatik alçalma) ----Elektrik / Aydınlatma: * Lastik basıncı izleme sistemi, EBS sinyali üzerinden kamyonda görüntüleme imkanı sağlar -kamyon tarafında herhangi bir kurulum gerektirmez- * 15 kutuplu elektrik fişi * Koruyucu kapaklı LED aydınlatma sistemi * 2 LED geri vites lambası (geri vitese göre devreye girer) ----Çekme Çubuğu: * Pnömatik olarak alçaltılabilen, 1.800 mm uzunluğunda, 40 mm çekme bağlantısı ve yay ve gerdirme kilidi aracılığıyla yüksek ayarlı çekme çubuğu ----Genel Montaj Parçaları: * 858 x 500 x 500 mm boyutlarında, sağ tarafta plastik alet kutusu * Galvanizli delikli sacdan yapılmış, 1.000 x 500 x 500 mm boyutlarında, yandan monte edilmiş konteyner ağı saklama kutusu * Kapalı plastik çamurluk (ön ve arka) * Kapalı, yandan çarpma koruması (RAL 9010 saf beyaz), reklam alanı olarak kullanılabilir * Arkada alt geçiş koruması * Arkada plastik tampon * Katlanabilir A tabelası * Tehlikeli madde etiketi, eşlik eden belge cebi ve arkada yansıtıcı park uyarı tabelası ----Konteyner Alanı: * Önden ek yükleme imkanı, arkada ray alçalması ve takılabilir durdurucu * Döner halka alanında, mekanik olarak ayarlanabilir durdurucu açılarla (2 pozisyon) ön sol ve sağ taraftaki raylarda çukurlaştırmalar * Ray uzunluğu yaklaşık 6.830 mm * Pnömatik 4'lü kelepçe kilidi * DIN 30722 Bölüm 1'e göre dış silindir kaplarının taşınması için -Dekra yük sabitleme sertifikası mevcuttur- ----Yükseklik: * Yüklü halde yaklaşık 1.130 mm ----Boya: * Şasi ve kilitleme parçaları sıcak daldırma galvanizli * Hava tankı, akslar, döner halka ve çekme çubuğu siyah renkte boyanmıştır Ijdpfx Ael Tn U Red Rsba ----Bilgiler: * --20.000 kg toplam ağırlık teknik olarak mümkündür-- * İlk tescilsiz yeni araç, üretici garantisi ile * Hatalar ve ön satışlar saklıdır * Örnek resimler ----Teslim Süresi: * Egestorf'tan hemen teslim edilebilir