Alçak şasi dorse

MÜLLER-MITTELTAL 3-achs mit Radmulden, 2 Ladehöhen, Klapprampen

Durumu: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear Lhsdpsq Euakjfx Af Ded * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Durumu: kullanılmış, kilometre: 219.000 km, güç: 353 kW (479,95 bg), ilk tescil: 09/2021, yakıt türü: dizel, boş ağırlık: 8.734 kg, azami yük ağırlığı: 17.466 kg, toplam ağırlık: 26.200 kg, lastik boyutu: 385/55R22,5 154G, dingil konfigürasyonu: 6x2, dingil mesafesi: 4.200 mm, bir sonraki muayene (TÜV): 10/2025, yakıt: dizel, frenler: motor freni, renk: beyaz, şoför kabini: yataklı kabin, vites türü: otomatik, emisyon sınıfı: hiçbiri, süspansiyon: çelik-hava, koltuk sayısı: 2, ön lastik ölçüsü: 385/55R22,5 154G, arka lastik boyutu: 315/70R22,5 154G, azami hız: 90 km/s, yatak sayısı: 2, Donanım: ABS, araç içi bilgisayar, diferansiyel kilidi, düşük ses seviyesi, elektronik denge programı (ESP), hız sabitleyici, immobilizer sistemi, kabin, kamyon kaydı, klima, merkezi kilitleme, navigasyon sistemi, park ısıtıcısı, soğutma ünitesi, çekiş kontrolü, Satış için irtibat kişisi: Frank Rau / Rusça / İngilizce / Almanca - Bachar Ibrahim / Arapça / İngilizce / Almanca - Tescil hizmeti, muayene (HU/SP/UVV), limana taşıma 12 vitesli, çevre etiketi: 4 (yeşil), otomatik şanzıman, dizel, Euro6d, arka aks tahriki, klima, ana renk: beyaz Donanımda ekstra özellikler ABS, Adaptif hız sabitleyici, hava yastığı, yol bilgisayarı, diferansiyel kilidi, EBS, ESP, kullanıma hazır, sürücü için uyuma alanı, kabin, soğutma ünitesi, kamyon ruhsatı, alaşım jantlar, düşük gürültülü, navigasyon sistemi, fiyat sorunuz (Mobile), park ısıtıcısı, sabit klima, hız sabitleyici, çekiş kontrolü, video, immobilizer, merkezi kilit, süspansiyon: yaprak-hava, taşıma kapasitesi (kg): 17466, sürekli fren (Börse): motor freni Üst yapı tipi: ACTROS 2548 2021 6x2 kaldırma akslı Euro 6d 68 ton push-pull, 219.000 km, Alman aracı, ilk el, HSN/TSN: 7070/000 Hatalar mümkündür. Lhodpfjxch S Dex Af Dsd

Durumu: yeni, azami yük ağırlığı: 36.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform Lsdpfeykx Nksx Af Djhd * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Durumu: yeni, azami yük ağırlığı: 36.900 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear Lhedpeykx Nqjfx Af Dod * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Durumu: kullanılmış, boş ağırlık: 10.900 kg, azami yük ağırlığı: 43.600 kg, toplam ağırlık: 54.500 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2025, yükleme alanı uzunluğu: 8.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 855 mm, lastik boyutu: 245/70 r17.5, renk: gri, Üretim yılı: 2025, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck, rigid, central tube design: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Steel floor covering with anti-slip coating - Including perforated rail for aluminium approach ramps - 2" king pin - Mechanically operated BPW landing legs - 550 mm long, 8° incline at the gooseneck end - Front wall including storage position for rear wall, 400 mm high - Spare wheel holder mounted upright at the front of the gooseneck - 3 pairs of recessed lashing rings LC 5,000 daN in the loading area of the gooseneck - Aluminium drop-in side walls, 400 mm high, consisting of 2x side walls (3,150 mm length) and rear wall with stanchions (galvanised) - Storage box rectangular, aluminium, folding lid, lockable, approx. 400 x 800 mm, centre - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, left - Storage box 45’, aluminium, folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single extendable: - Enclosed outer frame with cut-outs for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Sheet metal floor covering with anti-slip coating - Angled interface between fixed section and loading platform for bridging rails and wheel recesses - Excavator recess including longitudinal slots for cargo securing (LC 1,500 daN), approx. 3,850 mm length - Preparation for hydraulic ramp (electrical supply) - Outriggers for widening to 3,000 mm - Angled vehicle rear, 8°, 550 mm long - Sled design for easy installation and removal of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally located on loading platform behind gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally at the rear of the loading platform - 1 pair of stanchion pocket rails approx. in the centre of the loading platform - 1 pair of stanchion pocket rails on the fixed section - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic split folding ramps, 2,750+1,500x800 mm - Larch wood covering - Remote control operation (wired and wireless options) - Ramps with quick-change (dismantling) system Chassis: - Axle make: BPW ECO Max - 2 ride heights - 4 axles at 10 t each (technically 12 t) - Twin tyres 245/70 R17.5 - 2 x rigid axle and 2 x friction-steered axle - Reverse steering lock for friction-steered axle by engaging reverse gear - Brake system: Knorr brand (according to EU regulations with EBS-E) - TIM G2 from Knorr (Trailer Information Module) - RSS (Roll Stability Support) - Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM possible) Accessories: - 4 wheel chocks with holders - 2 pairs of warning boards 423 mm x 423 mm, with 2 position lights and socket for beacon, infinitely adjustable up to 3,950 mm - Lashing options at gooseneck and on loading platform (alternatively on ramp, if present) included - Removable splash plate at the end of the excavator recess - Electro-hydraulic unit for ramp operation - Wireless remote control for ramp operation Lhjdpfxoi Ai E Re Af Dod - Hydraulic support legs at vehicle rear for support during loading - 1 pair additional reversing lights at rear, activated with reverse gear - Wooden broadening planks – larch (option)

Durumu: kullanılmış, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2017, * SAF akslar Lhjdswta Alspfx Af Dod * Teker havuzları * Genişliği ayarlanabilir hidrolik yükleme rampaları * Havalı süspansiyon * Genişletilebilir * Boş ağırlık: 11.020 kg -----Dahili araç numarası: 11010----Hatalar ve ara satış hakkı saklıdır. WhatsApp desteği mevcut! Araçla ilgili sorularınız veya daha fazla bilgi için bize rahatça WhatsApp üzerinden yazabilirsiniz. WhatsApp Almanca, İngilizce -- WhatsApp Almanca, İngilizce, Arapça

Durumu: kullanılmış, azami yük ağırlığı: 42.500 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2022, with 12 axles, split, hydraulically suspended, hydromechanical forced steering, with rear bevel and drive-on ramps STZ-L gooseneck - robust steel welded construction Lhedpfx Afjw Etd Tj Dod - designed loading area: 3,950 x 2,480 mm including bevel - hydromechanical forced steering (dual circuit steering) - turntable-mounted saddle plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load: 24 t - steering radius to rear: 2,600 mm Loading Area - recessed outer sections: 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decks installed - extendable by 2,053 mm - including aluminium bridging ramps for creating a level platform - excavator arm trough at rear chassis: 4,900 mm long, 880 mm wide, 480 mm deep - rear chassis length: 4,900 mm incl. 500 mm bevel, loading height 890 mm - one pair of wheel recesses in the lower loading area - hydraulically suspended 3-axle chassis - split Gigant axles with 600 mm lift Rear of vehicle - design: “Beveled” 500 mm - hydraulic rear support Drive-on ramps - two-piece drive-on ramps, length 2,850 + 1,850 mm, width 800 mm - rubber coating with climbing strips Braking System - two-line all-wheel pneumatic brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic linkage plates (AGS) - parking brake via spring-loaded cylinders - ABS/ABV brake Special equipment Radio remote control for steering and ramp control Central lubrication system Technical data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Saddle height loaded: 1,300 mm Loading area Loading platform (LxW): 10,030 mm x 2,850 mm, extendable by 2,053 mm recessed outer sections 4,630 mm long plus 2,053 mm extension center beam 980 mm excavator arm trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st axle to 3rd axle: hydromechanically forced steering (dual circuit steering)

Durumu: kullanılmış, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli) * İlk tescil: 11/2004 * 3 aks * Havali süspansiyon * Gigant akslar * Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir * Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir * Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m * Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m * Destek ayakları * Boş ağırlık: 10.260 kg * Teknik toplam ağırlık: 47.000 kg Lhsdsw Tgkbepfx Af Dod * Muayene geçerlilik: 08/2026'ya kadar * Genel muayene: 02/2026'ya kadar geçerli

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, güç: 205 kW (278,72 bg), yakıt türü: dizel, toplam ağırlık: 20.000 kg, Üretim yılı: 2025, çalışma saatleri: 400 h, Donanım: UVV güvenlik kontrolü, araç içi bilgisayar, ayarlanabilir bom, We are pleased to offer you a WERT Phantom two-shaft shredder. - used machine - Drive – Engine: CAT-C7 – 285 HP Hydraulics: Bosch-Rexroth Torque / Gearbox: 240,000 Nm Discharge Height: 3,100 mm Discharge Conveyor: 1,000 mm wide Diesel Tank: 380 l Hydraulic Tank: 120 l Shaft Length: 1,500 mm Shaft Diameter: 650 mm Magnet Weight: 1.1 t Total Weight: 18.5 t Dimensions (L x W x H): 9.2 x 2.3 x 2.55 m Two-shaft shredder – ready for the future of recycling technology. A true innovation in the shredding industry. Driven by the vision to create a shredder capable of processing stone, minerals, concrete, as well as waste wood, green waste, root wood, municipal and industrial waste, paper, or light scrap, we succeeded in developing the PHANTOM. This multifunctional shredder features a revolutionary quick-change shaft system and a tool changing system. These innovative systems allow fast, simple, and low-maintenance replacement of shredder shafts to suit your application. Manufactured to the highest quality standards – “Made in Germany” – and designed for straightforward, user-friendly operation to ensure maximum performance and optimal cost-effectiveness. Feel free to contact us for further questions! Our listings are prepared with the utmost care. Ljdpow T Stbsfx Af Dohd However, we cannot guarantee the accuracy, completeness, or current validity of the information and prices provided.

Durumu: kullanılmış, azami yük ağırlığı: 23.000 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2025, Donanım: ABS, GVN 3GVN29 OVERSIZED PLATFORM *KOC*LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES TECHNICAL DATA AND EQUIPMENT SHEET, VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL TRADE NAME: * 3GVN29 ----WEIGHT SPECIFICATIONS UNLADEN WEIGHT * 13,000 kg AXLE LOAD DISTRIBUTION 1st axle: 3,653 kg 2nd axle: 3,653 kg 3rd axle: 3,653 kg ACTUAL VEHICLE WEIGHT * 13,000 kg TECHNICALLY PERMISSIBLE MAXIMUM TOTAL WEIGHT * 58,000 kg Lsdjw Dlqispfx Af Dehd TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1st axle: 12,000 kg 2nd axle: 12,000 kg 3rd axle: 12,000 kg TECHNICALLY PERMISSIBLE MAXIMUM WEIGHT FOR AXLE GROUPS 1st group: 36,000 kg MAXIMUM TOTAL WEIGHT FOR REGISTRATION * 35,500 kg MAXIMUM AXLE LOADS FOR REGISTRATION 1st axle: 8,000 kg 2nd axle: 8,000 kg 3rd axle: 8,000 kg MAXIMUM WEIGHT FOR AXLE GROUPS FOR REGISTRATION 1st group: 24,000 kg TECHNICALLY PERMISSIBLE MAXIMUM STATIC LOAD ON KINGPIN * 22,000 kg MAIN TECHNICAL DIMENSIONS (COC) • OVERALL LENGTH: 13,050 mm • CARGO BED LENGTH: 9,200 mm • VEHICLE WIDTH: 2,550 mm • OVERALL HEIGHT: 3,000 mm • PLATFORM HEIGHT: approx. 910 mm • NUMBER OF AXLES: 3 • TYRE SIZE: 235/75 R17.5 • SUSPENSION: AIR SUSPENSION • COLOUR: RAL 5011 ----EQUIPMENT LIST • EXTENDED GOOSENECK • FIXED GOOSENECK • STEEL FRONT WALL • 2 DETACHABLE STEEL SIDE DOORS • 1 DETACHABLE STEEL REAR FLAP • FRONT TOOLBOX • FRONT TOOLBOX UNDER THE CATWALK • LOADING PLATFORM ABOVE THE CATWALK LOADING PLATFORM • HIGH-STRENGTH S355 STEEL • PLATFORM EDGES CLAD WITH WOOD • PLATFORM SURFACE COVERED WITH STEEL SHEET • 14 SIDE EXTENSIONS EACH +230 mm • 14 FORGED STEEL LASHING RINGS, 16 TON EACH • EXTENDABLE OVERSIZE BOARDS • WIDE LOAD THRESHOLDS • WARNING SIGN FOR OVERSIZE LOAD • ATTACHMENT POINTS • ADDITIONAL SUPPORTS • PRESSURE INDICATOR AXLES AND SUSPENSION • 3 AXLES • OSMAN KOC AXLES, BPW-COMPATIBLE • 3RD AXLE STEERABLE • 1ST AXLE LIFTABLE • TWIN TYRES ON ALL AXLES • FULL AIR SUSPENSION ON ALL AXLES • 1ST LIFT AXLE WITH DRUM BRAKES BRAKE SYSTEM • WABCO EBS ELECTROPNEUMATIC SYSTEM, EC STANDARD • AUTOMATIC REVERSE ALIGNMENT OF STEERED AXLE • DRUM BRAKES ON ALL AXLES TYRES AND RIMS • TYRES: 235/75 R17.5 • SPARE TYRE: YES • WHEELS: 12 • MAX SPEED: 80 km/h • RIMS: 6.75x17.5, STEEL, SILVER-GREY • SPARE WHEEL INCLUDED PAINTWORK • 2 COATS OF EPOXY PRIMER, EACH 100 MICRON • MINIMUM 100 MICRON 2K ACRYLIC PAINT • COLOUR: RAL 5011 ELECTRICAL SYSTEM AND LIGHTING • 24-VOLT SYSTEM, EC STANDARD • WATERPROOF AND FROST-PROOF CONNECTIONS • SIDE AND POSITION LIGHTS • 6 REAR LIGHTS, 3-FUNCTION • 2 REVERSING AND WORK LIGHTS • 2 INDICATORS • 2 NUMBER PLATE LIGHTS • 1 ROTATING BEACON • 2 TRIANGULAR REFLECTORS • REFLECTIVE STRIPS AND E-MARKING • TRAILER LIGHT SYSTEMS • ROTATABLE REAR WORK LIGHTS RAMP • FIXED HYDRAULIC ACCESS RAMPS • HYDRAULIC SIDE SHIFT LEFT/RIGHT • SUPPORT LEGS: 24 TONS DYNAMIC, 50 TONS STATIC (OMS) • MANUAL RAMP SUPPORT LEGS • POWER SUPPLY FOR HYDRAULICS