Kullanılmış itme yarı römork satın al (1)

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, süspansiyon: hava, Üretim yılı: 2014, iç yükseklik: 2.650 mm, iç uzunluk: 11.050 mm, makine/araç numarası: WSJPRS218ETC25551/58, Donanım: hidrolik arka platform, Dimensions and legally permitted weights: Internal length: 11,105 mm Internal width: 2,480 mm Overall width: 2,550 mm Turning circle: 2,040 mm Neck beam height: 160 mm Coupling height: 1,135 mm Total height: 4,040 mm Internal height: 2,650 mm Side insertion height: 2,600 mm Fifth wheel load: 12,000 kg Axle load: 18,000 kg Total permitted weight: 30,000 kg Hodpfxewy Nc Us Aacsfn Chassis frame: Flat chassis frame with 2 main beams from single profile, connected by through-going U-profile cross members approximately every 430 mm. Rear cross member reinforced for forklift loading, positioned 200 mm from the rear. Edges made from U-profile 140.100.3 mm, with V-groove. Coupling section: Detachable 2" kingpin in 8 mm thick coupling plate. Welded-on sliding plate, extended forward to protect light/air connectors. Trailer supports: Maintenance-free trailer support legs, Jost type Modul, with 2 speeds and footplates. Axle and suspension: Tridex steering SAF air suspension system with 2 rigid, low-maintenance Modul axles, and 1 steered Tridex axle. Technical capacity 9,000 kg per axle, with disc brakes, automatic brake adjusters, and raise/lower valve. Braking system: Wabco load-dependent dual-circuit braking system with 2 ISO connections and spring brake cylinders. Wabco 2-channel electronic EBS type 2S/2M with integrated RSS. Wheels: 4 steel rims 22.5 x 7.50 (hub-centric) with 385/65 R 22.5 tires. Lighting and marking: 24V 7-pin electrical system with Aspöck wiring and lighting: - 2 Ecopoint combination rear lights (7-chamber) - 2 white Flatpoint width lights mounted at the front - 2 x 3 yellow LED side marker lights, Flatpoint type - 2 red/white/orange wide marker lights, Superpoint II type on rubber stalks at the rear - 2 license plate lights, Regpoint type - 1 ISO-N and 1 ISO-S 7-pin sockets - 1 ISO 12098 15-pin socket - 1 ISO 7638 7-pin EBS socket - 2 work lights Wheel protection: Equipped with 4 semi-circular plastic mudguards with ExSpray anti-spray mudflaps with logo. Floor: 30 mm thick anti-slip floor. Front bulkhead: Detachable steel front bulkhead frame. 300 x 4 mm steel collision plate welded inside on the front cross member. Rear portal: Steel rear portal with 2 foam-core rear doors, each with 2 integrated locking rods (handles under the doors) and a sliding rear header, 120 mm high. Door retainer on both sides. Stakes: Two freely movable sliding stakes with plank holders and 4 rows of wooden planks on each side. Sliding roof: Fixed roof Sliding curtains: Freight-type sliding curtains made from high-quality PVC tarpaulin, 900 g/m². Vertical tensioning strap every approx. 600 mm with stainless steel buckle and galvanized hook. The curtains can be tensioned horizontally at the front and rear by a tensioning device. The curtains run on nylon rollers in the aluminum roof rails. Accessories: Fixed steel rear bumper. Aluminum side underrun protection. Steel impact strips at the rear. B-sticker. 60 km/h sticker Lift axle Included: D'hollandia tail lift, 2,000 kg platform, 2,000 mm