Düşük yükleyici

Goldhofer Spinebed BB 450 A

Durumu: iyi (kullanılmış), ilk tescil: 03/2011, Üretim yılı: 2011, Unladen weight: 34,500 kg Body manufacturer: GOLDHOFER STHP/XLE 8 (3+5) Lowloader Extendable body: Yes Technical condition: Good Optical condition: Good Kodpfxevfnyqe Aggofa

Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WGOTHPE4560028329, toplam ağırlık: 102.000 kg, süspansiyon: hidrolik, renk: sarı, Üretim yılı: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical data according to original TÜV inspection report: - Maximum speed: 80 km/h - Fifth wheel load: 30,000 kg - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Total trailer weight: 102,000 kg (with 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Max. fifth wheel load: 30,000 kg - King pin: 3.5" - Configuration for direct mounting of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED DECK - Payload: 67.75 t - Extendable from 6,000 to 14,000 mm - Central tube fixed to rear 4-axle bogie - Claw coupling at the front - Central tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded deck height: 650 mm (ground clearance 210 mm) - Adjustable width from 2,750 to 3,250 mm - Sliding tables (weight 405 kg) - Folding widening panels (weight 1,955 kg) 4-AXLE BOGIE Kjdpewzl Nmsfx Aggofa - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height approx. 1,140 mm (+400/-200 mm) - Central lubrication Beka-Max Good condition - German vehicle from first owner - Immediately available from stock in Kirchheim unter Teck - Further details on request.

Durumu: kullanılmış, azami yük ağırlığı: 120.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/1993, Üretim yılı: 1993, Donanım: ABS, Üretici: GOLDHOFER Tip: THP-SL Yapım yılı: 1993 / 2010 aşağıdakilerden oluşur: - Hidrolik üniteli deveboynu (yıl: 1993 - hidrolik: 2003) - 2 akslı şasi modülü (yıl: 2010) - 3 akslı şasi modülü (yıl: 1993) - 4 akslı alt şasi modülü (yıl: 1993) - Ekskavatör yatağı 5,8 m rijit (yıl: 2010 - taşıma kapasitesi 100 ton) - Ekskavatör yatağı 8m + 5m uzatılabilir (yapım yılı: 1993 - taşıma kapasitesi 120 ton) Hemen temin edilebilir. Ksdpfx Aget Irxxogjfa Hatalara ve önceki satışa tabidir.

Durumu: yeni, azami yük ağırlığı: 48.180 kg, toplam ağırlık: 70.700 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.750 mm, Donanım: ABS, You can find our entire vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Complete equipment details available on request. GOOSENECK * Gooseneck with integrated single-axle chassis (pendle axle), detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front bevel approx. 60° * For tractor units: 6x4 or 8x4 * Front wall made of steel, removable, approx. 400 mm high, beveled version * 1 pair of mechanical supports at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of removable aluminium side walls, approx. 400 mm high, anodized version * 1 removable aluminium rear wall, approx. 400 mm high, anodized version * Anti-slip checker plate covering on the gooseneck * 3.5 inch king pin * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with single lid, mounted on the right in the direction of travel next to the ALU side wall on top of the gooseneck, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic connections from gooseneck to low-bed via multi-coupling * 1 LED work light left and right at the rear cross member of the gooseneck, wired to the connection strip to the tractor unit LOADING AREA * Low-bed with external beams, designed as a telescopic loading platform in low profile design with front extension, including fixed approx. 50 mm hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking position approx. every 1,000 mm on the extension * Fixed drive-on wedges at the front of the loading area with climbing strips * 1 lashing ring on the outside of the fixed drive-on wedges (LC 10,000 daN) * 1 hanging lashing ring on the outside left and right on the front cross member (LC 10,000 daN) * Lashing rings with retention spring approx. every 1,200–1,300 mm on the inner beams of the low-bed * Lashing rings with retention spring approx. every 1,200–1,300 mm on the outer beams of the low-bed (LC 10,000 daN) * Cut-outs above the lashing rings in the top flange of the outer beams * Mechanical bolt-tab coupling from the low-bed to the chassis, for changing the loading area or installing extension beams, with electro-pneumatic-hydraulic couplings * Outer beams of the low-bed with factory-applied sand coating for slip protection * 4 pairs of recessed lashing rings, horizontally installed in the loading platform, distributed along the outer frame/outer beams (LC 10,000 daN) * 1 lashing ring outside left and right on the rear cross member (LC 10,000 daN) * Folding width extensions, approx. 230 mm per side * Loose extension planks, steel-edged Kfsdowx Ddwepfx Aggsa * 6 pairs of threaded blocks between the lashing rings under the top flange of the outer beam, for mounting boltable M24 rings (LC 8,000 daN) * 2 pairs of M24 bolt rings (LC 8,000 daN) included REAR CHASSIS * Rear chassis with closed outer frame, checker plate covering and continuous prismatic excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear PENDLE AXLE * All axles are hydro-mechanically forced steered * Hose rupture valves on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins, for securing in raised position * Final paint of axles with two coats of two-component paint, single-tone in DB 7350 Novagrau * Hydraulic axle compensation *

Durumu: kullanılmış, dingil konfigürasyonu: 3 aks, renk: yeşil, Üretim yılı: 2013, Unladen weight: 25,200 kg Payload: 60,300 kg Kfsdpfx Ajwhl Sbjggea Gross vehicle weight (GVW): 85,500 kg

Durumu: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, ilk tescil: 07/1993, toplam uzunluk: 17.250 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 2.400 mm, süspansiyon: hava, lastik boyutu: 9.5R17.5, renk: kırmızı, Üretim yılı: 1993, Aks konfigürasyonu Lastik ölçüsü: 9.5R17.5 Aks markası: SAF Frenler: Kampana frenler Süspansiyon: Havalı süspansiyon Arka aks 1: Çift lastikli; Maks. aks yükü: 10.000 kg Arka aks 2: Çift lastikli; Maks. aks yükü: 10.000 kg Arka aks 3: Çift lastikli; Maks. aks yükü: 10.000 kg Arka aks 4: Çift lastikli; Maks. aks yükü: 1.000 kg Kjdpfx Aoutr Nusggjfa Ağırlıklar Boş ağırlık: 20.250 kg Yük kapasitesi: 43.000 kg Azami toplam ağırlık: 63.000 kg Durum Teknik durumu: iyi Görsel durumu: iyi Ek bilgi Daha fazla bilgi için Bart Mostert veya P. Mostert ile iletişime geçiniz.

Durumu: kullanılmış, Üretim yılı: 2024, Ashita Power AG3-70 * Emergency generator * New * Year of manufacture: 2024 * 70 kVA * Weight: 1,130 kg * Overall dimensions: 2.10 m x 0.83 m x 1.17 m * Generator output: 70 kVA * Voltage: 400 V * Diesel engine * Electric starter * 2x 230V outlet * 1x 360V outlet * CE and ISO certified * Forklift pockets * Sound-insulated Suitable trailers can be purchased at an additional cost. ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right of prior sale, as this item is also offered on other platforms. We strongly recommend an inspection and assessment to ensure the buyer has no misunderstandings about the condition or suitability. Inspections and assessments are possible at any time by appointment and are expressly encouraged!!! Images are similar and may show optional accessories subject to additional charges. All stated internal dimensions are approximate values. Kjdpjgamvvefx Aggofa TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock!!! Legal Notice: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: