Alçak yükleyici yarı römork

MAX Trailer 2-Achs-Tiefbett mit Pendelachsen

A current and comprehensive inspection and function report is provided with every used trailer.

Gooseneck:
- Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractor units: 4 x 2, 6 x 2, and 6 x 4

Loading platform:
- Low bed with external longitudinal beams in extendable "SUPER LOW" design, length approx. 6,850 mm
- Low bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking
- 5 pairs of fold-out lashing rings on the outside
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings

Rear chassis:
- Rear chassis with closed external frame, checker plate covering, and continuous prism excavator recess approx. 1,250/700 x 505 mm, open at the rear

Pendulum axles and tires:
- "PENDULUM AXLE," all axles hydromechanically forcibly steered
- Hose rupture valves on axle compensation cylinders with automatic RESET function
- Hydraulic cylinders with shut-off valves and safety pins for securing in lifted position
- Axles finished with two coats of single-color 2-component paint in grey
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tires: 245/70 R 17.5

Included accessories:
- Preparation for bolt-on container locks for 1x 20ft or 1x 40ft container on the outer beams
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- One spare wheel with holder
- Yellow-red air couplings on the galvanized connection bar at the front
- 4 wheel chocks with holders
Bsdpfjw S Tt Hsx Ah Holp
- Remote steering of front and rear axles via cable remote control with push-buttons and single-track axle monitoring
- Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings
- Electro-hydraulic power unit
- 2 wooden blocks 500x250x200 mm
- Mount for beacon at the rear
- Mudflap at the rear
- European reflective panels (red-yellow) at the rear of the trailer
- Bracket for warning signs with socket on each side of the gooseneck and rear plate
- Central lubrication system with 2 BEKAMAX pumps
- Load gauge for determining axle loads, including load diagram
- 6 pairs of threaded blocks between lashing rings under the top flange on outer beam for mounting bolted RUD rings VLBG-4
- 2 pairs of bolted container locks on the outer beams, incl. 2 pairs of container twist locks for 1x 20ft or 1x 40ft container
- On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm
- One INOX toolbox 1,350 x 400 x 400 mm on the gooseneck
- 5 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading platform
- Foldable extensions, approx. 230 mm per side
- Extension boards made of hardwood
- Maximum load permitted on an area of 200 x 200 mm up to 3.5 t
- 1 pair of steel ramps to bridge the hook mounts of the low bed
- Sand coating painted on the loading surface for slip resistance
- 2 reversing lights on the rear plate
- Excavator boom recess of the rear chassis closed at front and rear with a plug-in plate
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, with position light
- HRM metalization (High Resistance Metallization) of the external frame

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.