Alçak şasi dorse

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

Durumu: kullanılmış, azami yük ağırlığı: 37.575 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2022, bir sonraki muayene (TÜV): 10/2025, toplam genişlik: 2.540 mm, Donanım: ABS, More vehicles available at Excerpt from the equipment. Full specifications on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Load Area: - Telescopic load area with rear chamfer approx. 1,000 mm x 8° - Between the 1st and 2nd axles, one pair of fixed wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) - 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN) - 4 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching lashing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t per piece Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle with trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools Tyres: - Tyres 235/75 R 17.5 Landing Gear: - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Braking System: - Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Paintwork: - HRM Metallization (High Resistance Metallisation), complete steel structure shot-blasted to SA2.5-SA3. Then hot refined with ZINACOR 850 (zinc 85% - aluminium 15%) - High-quality 2-component (2K) top coat, single color RAL 3002 carmine red Accessories Included: Rcedoxfx R Aopfx Agysh - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Galvanized, extendable side extensions approx. 230 mm per side - Galvanized folding supports underneath the chamfered load area - Bracket for a rotating beacon at the rear of the trailer - Plug-in aluminum side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H), rear galvanized stanchions removable (body length approx. 2,560 mm) - 1 galvanized toolbox integrated into the chamfered gooseneck - Hardwood rear bumper between gooseneck and load area - 3 pairs of WADER container locks in the load area for 20' (30') or 40' containers - 5 pairs of sockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the load area - Hardwood extension planks, max. load on an area of approx. 200 x 200 mm up to approx. 3.5 t - Galvanized holders for extension planks left and right under the load area - Non-skid sand coating painted on checker plate over the king pin and load area - 2 LED reversing lights mounted on the rear panel - 2 pairs of ferry rings under the gooseneck, 2 pairs at the rear - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load pressure gauge to monitor axle loads, including load chart - 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high - Storage for max. 7 pairs of plug-in stanchions approx. 100 x 50 mm on the front wall - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with hardwood beamed approx. 48 mm thick, incl. electro-hydraulic unit. Ramp with hydraulic folding ramp sections. Hydraulic lifting mechanism and hydraulically adjustable, maximum load ...

Durumu: yeni, azami yük ağırlığı: 37.710 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: - Gooseneck with front beveled corners approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading platform: - Telescopic loading platform with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable and galvanized covers over the wheel recesses (width = approx. 670 mm; max. point load 5 t/unit) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg each - Electro-magnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve. Axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – brand of our choice Landing legs: - JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Braking system: - Wabco braking system as per EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Rcodpfx Aew Tpq Rjgyjh Steel construction: - Steel structure made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system per EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paint finish: - Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) topcoat single-color in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - 2” kingpin - One galvanized steel front wall, approx. 400 mm high - Spare wheel bracket in front of the front wall - Yellow-red air couplings at the galvanized connection bar at the front - 4 wheel chocks with holder at the front wall - Mounting at the rear of the gooseneck for aluminum drive-on ramps - Galvanized folding supports under the rear bevel of the loading platform - Bracket for a beacon at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Yellow reflective tape to EU regulations at the sides, on the extension, and rear of the trailer - On the gooseneck and rear panel left and right, each with a holder for warning boards including socket - 1 hardwood buffer on the rear wall from gooseneck to loading platform - One galvanized holder for extension timbers on left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H) - The rear galvanized stakes are removable (length of superstructure approx. 2,560 mm) - A tool box ...

Durumu: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° Rcodpjw Tpq Defx Agysh - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durumu: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpts from the equipment list. Complete specifications available upon request. Gooseneck: Gooseneck with beveled front corners approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widened lower sections * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) * Including 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t each * Recess in the bevel as well as in the loading area for accommodation of the excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Redpfsw Tpqwex Agyjch One-piece Steel Ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting gear, hydraulically movable * Maximum load capacity per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in driving position are not counted in the total vehicle length Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg per axle * Electromagnetic reverse lock activated by reverse gear and manually * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardized EBS interface in accordance with ISO 11992. For correct display, the truck must be capable of receiving and displaying this data. Brake System: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel Structure: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front distribution board with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Entire steel structure is automatically shot-blasted after welding using a blast wheel system * Second blasting with corundum for optimum coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for maximum corrosion protection * Final topcoat with 2 layers of 2K paint, single-color, RAL 3002 Carmine Red, according to RAL System 841GL * Wheel rims in silver * Rear end metallized and in RAL 901