Yarı alçak yükleyici

ES-GE 3.VOU-16-30.1N-MG 7M Extendable 3 x in stock !!

Durumu: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2025, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). Bcsdpfsg Sk Tvox Abkju 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh

Durumu: kullanılmış, boş ağırlık: 12.360 kg, azami yük ağırlığı: 32.640 kg, ilk tescil: 11/2010, bir sonraki muayene (TÜV): 09/2024, toplam uzunluk: 20.000 mm, toplam genişlik: 25.500 mm, toplam yükseklik: 7.000 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5 /10mm, dingil mesafesi: 1.035 mm, ön lastik ölçüsü: 245/70 R 17.5 /10mm, işletme ağırlığı: 45.000 kg,

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2001, toplam uzunluk: 13.350 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, renk: kırmızı, Üretim yılı: 2001, Total length: 1334 cm + 1950 cm. Loading bed length: 915 cm + 1950 cm. Loading height: 100 cm. Bcjdpfx Abjycf Htjkeu = Further information = Axle configuration Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Steerable; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Rear axle 2: Twin tyres; Steerable; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50% Rear axle 3: Twin tyres; Steerable; Tyre tread left inner: 30%; Tyre tread left outer: 30%; Tyre tread right inner: 30%; Tyre tread right outer: 30% Weights Unladen weight: 15,650 kg Payload: 29,350 kg Gross vehicle weight (GVW): 45,000 kg Financial information Price: On request Identification Model number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide accurate information; however, no rights may be derived from the information provided.

Durumu: kullanılmış, azami yük ağırlığı: 36.650 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2021, bir sonraki muayene (TÜV): 11/2025, Donanım: ABS, Extract from Equipment Specifications Loading Platform: • Telescopic loading platform with pneumatically operated locking mechanism. • 2 pairs of recessed lashing rings (LC 5,000 daN). • 1 pair of lashing rings in the gooseneck area (LC 10,000 daN). • 6 pairs of fold-out outer lashing rings (LC 5,000 daN). Bodpfsx Epznjx Abkscu • 3 pairs of fold-out outer lashing rings (LC 10,000 daN). • Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN). Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: • Tyres 245/70 R 17.5 – brand of our choice. • Load index (146/146F). Axles: • BPW axles with hydro-mechanical forced steering. • Air suspension with lift and lower valve. • Axle tools. Brake System: • Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: • Steel structure made from high-strength fine-grained steel. • Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa). Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame through a 2-component (2C) zinc dust primer. • High-quality single-colour 2-component (2C) topcoat in RAL 3002 Carmine Red. • Rear section metallised and painted RAL 9010 (Pure White). • Rims silver. • Metallic paint not possible. Electrical System: • Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3). • ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. • Connections as per ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Warning Panels: • Brackets for warning panels with socket on both the gooseneck and the rear plate, left and right. Including the following additional equipment: - Rear axle steering from the front and rear via cable remote control with pushbuttons, axle tracking control included (without installation in the tractor unit). - Electro-hydraulic unit (± 45kg). - 4 wheel chocks with holder on the front wall (± 5kg). - 2-inch king pin. - Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35kg). - Yellow-red air couplings on the galvanized front connection bar. - Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer. - European reflective plates (red-yellow) on the rear of the trailer. - One mud flap at the rear of the trailer. - Operating manual and description on USB stick. - Bracket for a beacon light at the rear of the trailer. - Heavy-duty hardwood flooring on the loading platform. - 9 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform (± 27kg). - Galvanized extensible side extensions of approx. 230 mm per side (± 230kg). - Spiral cable for the supply of the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO). - Galvanized supports under the sloped section of the loading platform. - Central beam with sand-coated paint finish for anti-slip protection. - 6 pairs of WADER container pockets in the loading platform for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90kg). - 4 pairs of transverse stake pocket strips mounted on the loading platform for plug-in stakes approx. 100 x 50 mm (± 145

Durumu: iyi (kullanılmış), dingil konfigürasyonu: 3 aks, ilk tescil: 03/2001, toplam uzunluk: 13.600 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 2.300 mm, süspansiyon: hidrolik, lastik boyutu: 205/65-22.5, dingil mesafesi: 86.300 mm, Üretim yılı: 2001, Donanım: ABS, = Additional Options and Accessories = - Spare wheel = Notes = - Nooteboom low-bed trailer (Type: MC0-50-04) - 4 x hydraulically steered axles - With wired remote control - Loading bed length: 880 cm - Extendable up to 2140 cm - Loading platform height: 87 cm - Fifth wheel load: 18,000 kg - Neck length: 310 cm - Storage box - Lashing rings along the entire length - 2 rows of stake pockets - Very good German trailer! = Further Information = Axle configuration Tyre size: 205/65-22.5 Bedpfjx Aiduox Abkjcu Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: twin tyres; max. axle load: 7,000 kg; steered; left inside tyre tread depth: 50%; left outside: 50%; right inside: 50%; right outside: 50% Rear axle 2: twin tyres; max. axle load: 7,000 kg; steered; left inside tyre tread depth: 50%; left outside: 50%; right inside: 50%; right outside: 50% Rear axle 3: twin tyres; max. axle load: 7,000 kg; steered; left inside tyre tread depth: 50%; left outside: 50%; right inside: 50%; right outside: 50% Rear axle 4: twin tyres; max. axle load: 7,000 kg; steered; left inside tyre tread depth: 50%; left outside: 50%; right inside: 50%; right outside: 50% Weights Unladen weight: 16,560 kg Payload capacity: 29,440 kg Gross vehicle weight: 46,000 kg Condition Technical condition: good Visual condition: good Product safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Durumu: kullanılmış, renk: kırmızı, Üretim yılı: 2020, Faymonville F-S43-1AAF Baujahr: 2020 12-Tonnen-SAF-Achsen Max. Gesamtgewicht: 61.000 kg Bcjdsygmk Iepfx Abkou Sattellast: 25.000 kg Servolenkung mit 3 gelenkten Achsen Hydraulikanlage kompatibel mit NATO-Anschluss EBS, ABS, ALB Zweifach ausziehbar: 1. Auszug: 8,15 Meter 2. Auszug: 8,45 Meter Gesamtlänge ausgezogen: 16,5 Meter Werkzeugkasten + Aluminium-Bordwände am Schwanenhals Beidseitig je 25 cm verbreiterbar Funkfernbedienung Reserverad Hydraulische Federung (links und rechts separat steuerbar) Zentralschmieranlage Feuerverzinkte Ausführung Zusätzlicher Zwischentisch: 50 cm Zweiseitig hydraulische Auffahrrampen: - Länge: 2.800 mm + 1.400 mm - Hydraulisch seitlich verschiebbar (links/rechts) Abmessungen: Schwanenhals: L: 3.650 mm B: 2.550 mm H: 1.550 mm Sattelhöhe: 1.300 mm Ladefläche: L: 12.000 mm B: 2.550 mm H: 950 mm Bereifung: 245/70R17,5, Profil 80 % Top-Zustand! ID-Nr.: 601 Die Allgemeinen Geschäftsbedingungen (AGB) der Firma Heinhuis gelten für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis sowie für alle von Heinhuis geschlossenen Verträge und den Verhandlungen, die diesen vorausgehen. Mit jeder Form der Kontaktaufnahme erkennen Sie die Geltung der AGB der Firma Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2020 zulässiges Gesamtgewicht: 61.000 kg Ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durumu: kullanılmış, renk: mavi, Üretim yılı: 2012, Meusburger MPS-3. Baujahr: 2012. BPW-Achsen, 10 Tonnen Achslast. Eigengewicht: 12.500 kg. Nutzlast: 32.500 kg. Zulässiges Gesamtgewicht: 45.000 kg. Sattellast: 15.000 kg. 7 m ausziehbar (verlängerbar). Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug. Zentralschmieranlage. Funkfernbedienung. ABS, EBS, ALB vorhanden. Dach in der Höhe verstellbar. Servolenkung, 3 gelenkte Achsen. Luftfederung. Twistlocks. Schiebedach. Innenmaße: Länge: 13.590 mm. Breite: 2.490 mm. Bsdpfx Abjx S Ic Rjkecu Höhe innen: 2.900 mm. Höhe Ladefläche: 1.120 mm. Bereifung: 235/75R17,5, Profil 60%. Sehr gepflegter Auflieger! ID-Nr. 614. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Offerten sowie für alle von Heinhuis geschlossenen Verträge und die ihnen vorausgehenden Verhandlungen. Mit jeder Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 12.500 kg Zuladung: 32.500 kg zulässiges Gesamtgewicht: 45.000 kg Ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Durumu: yeni, azami yük ağırlığı: 25.050 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 950 mm, toplam genişlik: 2.550 mm, Gross weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Total length: 21,000 mm Loading length: loading area inside approx. 13,500 mm / max. loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Further information: Brand new vehicle from current production, available from approx. calendar week 8/2026 Rear support telescopic 4 wheel chocks with holder 4 pairs of recessed container locks in the floor for 1x 40 ft. container or 2x 20 ft. containers 1 spare wheel holder for 1 spare wheel, with wheel fixing kit, basket design 11 pairs of stake pockets integrated into the outer frame, suitable for FR insertable stakes 80x50 mm, flush-mounted in the outer frame, with slot for lashing belt or chain hooks 20 plug-in stakes, W=80/T=50/L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each 3.5 t, integrated into the side frame - neck area 13 pairs of folding lashing rings, each 10,000 daN, freely swiveling in the side frame profile (also suitable for oversize lashing) 1 pair of folding lashing rings, each 10,000 daN, installed laterally in the intermediate support Air suspension with raise and lower function 1st axle automatic lift axle, additionally with forced lowering including traction aid, operated by control button on the semi-trailer, no cabin actuation with raise & lower valve and auto-reset function Wheels and tires: 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 volt, multi-chamber rear lights, side marker LEDs in yellow 2 white LED position lights front 2 white/red LED lane departure lamps rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at front, without connecting cable 2 additional LED work lights at rear, switched via reversing light 1 removable beacon mounted on underrun protection 1 x 7-pin socket at rear 6 side sockets, 2x front wall, 2x support legs, 2x rear (left + right), 7-pin 2 work lights, flush-mounted at top of front wall, including switch 2 pairs of oversize signs, each with 2 LED clearance lights per sign, extendable sideways to 3,500 mm, signs additionally attachable to loading area (width adjustable steplessly) Fixed steel front wall, 1,200 mm high, with robust steel corner posts without corner bevel, straight on the sides 2 lashing holes, top inside and outside, in the front wall corners Frame front hot-dip galvanized + visible outer frame final coating in RAL 3002 carmine red Frame rear hot-dip galvanized + visible outer frame Bcsdpfx Abjumha Noksu final coating in RAL 3002 carmine red Front wall in RAL 3002 carmine red