Alçak şasi dorse

Doll Panther S3E Tele / Swiss-Vehicle

Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: Dwjdpjk Af Svsfx Aiwjb - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, yükleme alanı uzunluğu: 16.200 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 960 mm, toplam uzunluk: 16.200 mm, toplam genişlik: 2.750 mm, süspansiyon: hidrolik, lastik boyutu: 235 / 75 R17.5, renk: mavi, Üretim yılı: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailer Year of manufacture: 2009 Make: Goldhofer Additional Information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg Gross vehicle weight (GVW): 106,000 kg Unladen weight: 23,480 kg Payload: 82,520 kg Axles Axle brand: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steered 2nd axle rigid Axles 3 to 8 with hydraulic steering Axle 1 & 2 liftable Tyres: 235/75 R17.5 Dimensions Length: 16,200 mm Extension: 8,300 mm Max. extended length: 24,500 mm Loading bed length: 12,300 mm to 20,600 mm Loading bed width: 2,750 mm Loading bed height: 955 mm King pin height: +/- 1,280 mm Dwsdewwkrlopfx Aiweb Additional Equipment Operated via truck hydraulics Hydraulically operated gooseneck Lashing rings Stake pockets Wooden floor Mechanical landing gear Toolbox in gooseneck King pin diameter: 3.5” Central lubrication system Marker boards for oversize load Radio remote control = Further information = General information Year of manufacture: 2009 Axle configuration Tyre size: 235/75 R17.5 Axle make: BPW Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tyres; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tyres; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tyres; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 23,480 kg Payload: 82,520 kg Gross vehicle weight: 106,000 kg Features Loading bed height: 96 cm Extendable frame: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: Upon request

Durum: yeni, azami yük ağırlığı: 36.156 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Tare weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Platform length: 13,600 mm Loaded fifth wheel height: 950–1,050 mm Swing clearance at rear: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360 / 1,405 mm Overall width: 2,540 mm Dwsdpfx Aeg Sk Tvjiwjb Technical Description Load platform: Load platform in extendable design with pneumatically operated locking mechanism. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of fold-out lashing rings (LC 5,000 daN). 2 pairs of fold-out lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN). Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load). Axles: SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120). Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually. Axle tools (± 80 kg). Brake system: Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel construction: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Paintwork: Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice. Rear section metallised and painted in RAL 9010 (pure white). Metallic paint not available. Electrical system: Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin. Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Standard accessories included: Yellow-red air couplings on the galvanised front connector panel. 2 wheel chocks with holders. 2" kingpin. Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant. Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer. European reflective warning plates (red-yellow) at the rear of the trailer. Platform with approx. 38 mm hardwood floor (± 320 kg). 10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg). 1 spare wheel holder under the platform, right-hand side in direction of travel. Tyres 435/50 R 19.5, manufacturer’s choice. One mud flap at the rear of the trailer. Manual and documentation on USB stick. Bracket for rotating beacon at the rear of the trailer. At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket. One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg). 6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg). Storage for 1,000 mm plug-in stakes (± 45 kg). 1 spare wh

Durum: yeni, azami yük ağırlığı: 31.500 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Donanım: ABS, Wiese 3-axle semi-trailer with lift table and foldable tail section. Ideal for transporting forklifts and/or aerial work platforms. Technical Specifications: - 3 x 10 t axles - Lift axle - Steering axle with Smart Steering (steers forward and reverse) - Outer beam chassis with incline - Gooseneck design rated for 18 t, suitable for 2- and 3-axle tractor units - Hydraulic lift table adjustable in 3 positions - Rear in tailgate version including hydraulic extensions, usable as loading ramps, drive-over ramp or loading area (total length reduced when tailgate is upright) - Remote control for ramps and lift table - Front wall - Grated floor - Numerous lashing points - SmartBoard - Central lubrication system - Steel construction, hot-dip galvanized and painted A wide range of options available on request, for example: - Winch Dwjdpfxjvw Hmts Aiweb - Toolbox on the fifth wheel step - Aluminium rims Further information available upon request.

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 06/2018, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.550 mm, toplam uzunluk: 11.000 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 265/70/19.5, renk: mavi, Üretim yılı: 2018, Donanım: ABS, = Diğer opsiyonlar ve aksesuarlar = - Kaldırma aksı - Havalı süspansiyon = Diğer bilgiler = Aks konfigürasyonu Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon Dedswifrdopfx Aiwowb Arka aks 1: Lastik ölçüsü: 265/70/19.5; Çift lastikli; Kaldırma aksı; Maks. aks yükü: 10.000 kg; Yönlendirilebilir Arka aks 2: Lastik ölçüsü: 265/70/19.5; Çift lastikli; Maks. aks yükü: 10.000 kg; Yönlendirilebilir Arka aks 3: Lastik ölçüsü: 165/70/19.5; Çift lastikli; Maks. aks yükü: 10.000 kg; Yönlendirilebilir Ağırlıklar Boş ağırlık: 12.000 kg Yük kapasitesi: 36.000 kg Azami toplam ağırlık: 48.000 kg Fonksiyonel Yükleme alanı yüksekliği: 95 cm Durum Teknik durum: çok iyi Görsel durum: çok iyi EMTECH 3 AKSLI ALÇAK DORSE SAF AKSLAR TRIDEC DİREKSİYON SİSTEMİ HAVA SÜSPANSİYONLU, DİREKSİYONLU, 1 AKS KALDIRMA AKSIDIR 10.000 KG/Aks TEKNİK OLARAK MÜSAADE EDİLEN AZAMİ TOPLAM AĞIRLIK 48.000 KG LASTİK ÖLÇÜSÜ 265/70 R19.5 YÜKLEME ALANI BOYU 700 CM TELESKOPİK (UZATILABİLİR) 515 CM YÜKLEME ALANI GENİŞLİĞİ 255 CM YÜKLEME ALANI YÜKSEKLİĞİ +/- 95 CM KANCALI GÖZLER VE STAKET YUVALARI

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2001, toplam uzunluk: 13.350 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, renk: kırmızı, Üretim yılı: 2001, Toplam uzunluk: 1334 cm + 1950 cm. Yükleme platformu uzunluğu: 915 cm + 1950 cm. Yükleme yüksekliği: 100 cm. = Ek Bilgiler = Aks Konfigürasyonu Lastik Ebadı: 245/70R17.5 Frenler: Kampana frenler Süspansiyon: Hava süspansiyonu Arka Aks 1: Çift lastikli; Direksiyonlu; Lastik diş derinliği (sol, iç taraf): %30; Lastik diş derinliği (sol, dış taraf): %30; Lastik diş derinliği (sağ, iç taraf): %30; Lastik diş derinliği (sağ, dış taraf): %30 Arka Aks 2: Çift lastikli; Direksiyonlu; Lastik diş derinliği (sol, iç taraf): %50; Lastik diş derinliği (sol, dış taraf): %50; Lastik diş derinliği (sağ, iç taraf): %50; Lastik diş derinliği (sağ, dış taraf): %50 Dodsycf Htepfx Aiwewb Arka Aks 3: Çift lastikli; Direksiyonlu; Lastik diş derinliği (sol, iç taraf): %30; Lastik diş derinliği (sol, dış taraf): %30; Lastik diş derinliği (sağ, iç taraf): %30; Lastik diş derinliği (sağ, dış taraf): %30 Ağırlıklar Boş ağırlık: 15.650 kg Yük kapasitesi: 29.350 kg Toplam ağırlık: 45.000 kg Tanımlama Model numarası: 3 ABSD-48/3 / 3 x UZATILABİLİR / 3 = Şirket Bilgileri = TÜM FİYATLAR, İHRACAT İÇİN NET FİYATLARDIR. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Rusça biliyorum) Elimizden gelenin en iyisini yaparak doğru bilgiler sunmaya çalışıyoruz; ancak, yayınlanan metinlerden herhangi bir hak talebinde bulunulamaz.

Durum: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm Dodpfeyxc Eysx Aiwjwb - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart

Durum: ikinci el, kilometre: 214.314 km, güç: 427 kW (580,56 bg), ilk tescil: 09/2020, yakıt türü: dizel, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, frenler: retarder, renk: gümüş, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2020, Donanım: ABS, elektronik denge programı (ESP), klima, navigasyon sistemi, park ısıtıcısı, * Scania S580 * V8 580 hp * Tam havalı süspansiyon Djdpfoy Rbxijx Aiwjwb * Alüminyum jantlar * Retarder * Model yılı 2020 * 214314 km * Park kliması * Park ısıtıcısı * Otomatik klima * Üst düzey donanım * Araç çok iyi durumdadır * Araç hâlen kullanılmaktadır * YS2S4X200055978 * Çalışma saatleri: Pazartesi-Cuma 07:30-12:00, 13:00-18:00; Cumartesi 07:30-17:00 * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber İngilizce: Mladen Ilic

Durum: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.700 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with a 1,000 mm x 6° taper - Suitable for tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading platform, approx. 9,700 mm in length, with hydraulically folding and lowering rear, as well as hydraulically raisable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axes rigid, 3rd axle self-steering - 3rd axle equipped with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tires - TPMS tire pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electro-hydraulic auxiliary steering for the self-steering axle of a 3-axle assembly - Automatic control of the trailing steering axle during reversing via gyroscope sensor - Manual steering operation in forward and reverse via separate wireless remote control - Manual operation enabled up to 10 km/h - System powered by a separate electro-hydraulic unit Accessories Included: - Removable steel headboard, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every approx. 400 mm - Additional mounting hole at the rear upper section of the outer beams for a bolted lashing ring - Grating platform with 5 mm sheet metal reinforcement on gooseneck and rear taper - 2" kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Round NATO socket at the front terminal strip (Maeler & Kaege VG 96 917) - 1 pair of removable, anodized ALU side walls on the gooseneck, approx. 400 mm high - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - Winch mounting located at the front inside the gooseneck - Continuous grating floor with 5 mm sheet base as additional reinforcement, rated for point load: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted anti-slip sand coating on the gooseneck’s cover plates, as well as in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, loadable in raised driving position: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cut-outs in the outer frame of the platform and the lift bed for attaching tension belts - Extensive lashing points - Hydraulic rear section can be lowered for loading/unloading and raised to reduce total train length - Loadable in driving operation in horizontal position: 10,000 kg - Reduction of overall train length when raised: 2,350 mm - Painted anti-slip sand coating on the entire ramp, except for the extendable galvanized ramp section - Hydraulically extendable rear extensions for loading/unloading - Wireless remote: - Operation of hydraulic lift bed - Operation of hydraulic lifting device for rear extension - Operation of hydraulic extension for rear extension Dodpfxeyw Sako Aiwjwb - 1st axle with traction assist - Central lubrication system with 1 pump - 4 warning panels, approx. 423 x 423 mm, extendable

Durum: ikinci el, boş ağırlık: 12.400 kg, azami yük ağırlığı: 39.500 kg, ilk tescil: 10/2006, bir sonraki muayene (TÜV): 10/2025, toplam uzunluk: 13.500 mm, toplam genişlik: 25.500 mm, toplam yükseklik: 10.000 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17.5/7mm, dingil mesafesi: 1.300 mm, ön lastik ölçüsü: 245/70 R 17.5/7mm, işletme ağırlığı: 51.900 kg,