Alçak şasi dorse

DOLL tera 2- Achs Tiefbett, Pendelachsen, MIETE?

Durum: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table Crjdpfok Af Svex Aiwsg - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durum: ikinci el, Üretim yılı: 2012, çalışma saatleri: 9.200 h, yakıt türü: dizel, ön lastik ölçüsü: 600/65R28, arka lastik boyutu: 650/65R42, Donanım: kabin, ref: 7292 1552 AutoPowr Transmission 2059 HCS Cab Suspension 2123 Comfort Air Seat D63 C 2511 Telescopic Mirrors Right & Left 2624 Panoramic Doors Right & Left 3240 155 l/min Hydraulic Pump 3326 2 Electro-hydraulic SCVs type 350 833H 3rd Electro-hydraulic SCV type 350 3832 PTO 540/540E/1000E rpm 4420 Stabilizers Right & Left 5031 Adjustable Rims 5273 Tyres 650/65R42 BKT 6254 Tyres 600/65R28 6067 TLS with brakes 8002 Toolbox 8012 Swinging Mudguards 8067 Autotrac Ready 8212 Automatic Air Conditioning 8216 HMS 8224 Interface Socket 8230 Interior Mirror Codpsva Itaofx Aiwsrg 8237 Ashtray & Cigarette Lighter 8240 3-pin Electrical Socket 8254 Passenger Seat 8264 Refrigerator 8276 Front & Rear Sunblind 8286 Camera Preparation 8325 405 l Fuel Tank 832C 3rd SCV Fender Control 832D Additional Hydraulic Oil Tank 14 l 832J Power Beyond 834N Front Hydraulic Outlet 840A / 841J 3-in-1 Drawbar Hitch 8725 2 Beacons 873B/873M/873O H4 Work Lights 8742 150 A Alternator 8747 850 A Battery 8751 Air Brake 878B Master Switch 878P Touchscreen Display 878R Bottle Holder Front Linkage Number of driven wheels: 4 Tyre/Track Information: 5273 Tyres 650/65R42 BKT 6254 Tyres 600/65R28 Transmission type: Continuously Variable (CVT) Engine hours: 9,200

Durum: ikinci el, Üretim yılı: 2014, çalışma saatleri: 2.650 h, güç: 316 kW (429,64 bg), azami hız: 30 km/s, Donanım: araç içi bilgisayar, kabin, klima, Çalışma saatleri: 2650, tambur/rotor saatleri: 1420, eğim dengeleme, hidrostatik tahrik_____Motor: John Deere 6 silindirli 9,0 L motor, 317 kW (yaklaşık 431 PS)Maksimum hız: 30 km/sTahıl tankı hacmi: 10.600 litreRotor: 762 mm çapındaBoşaltma hızı: yaklaşık 110 litre/saniyeYakıt deposu: 950 litreBiçerdöver tablası yokDonanım:Kabin: Büyük ekranlı, klima ve hands-free özellikli radyolu premium kabinGPS: Verim ve nem ölçümü dahilBord bilgisayarı: Tüm önemli makine parametrelerinin izlenmesiVerim kontrolü: Hasat performansının optimizasyonuZarar ölçümü: Hasat kayıplarının en aza indirilmesiHektar sayacı: Alan kontrolüGeri sarma sistemi: Tıkanıklıkların hızlı giderilmesi Salınım dengeleyici: Engebeli arazide stabilite Sap parçalayıcı: 100 bıçaklı ve radyal dağıtıcılı premium parçalayıcıDepolama yeri: Müşteri Cjdpfxjwgpf Aj Aiwjrg

Durum: yeni, azami yük ağırlığı: 44.000 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, Further information here: Codpfx Aijv D Abtewsrg

Durum: ikinci el, Üretim yılı: 2008, çalışma saatleri: 17.286 h, güç: 217 kW (295,04 bg), Donanım: her tahrikli, kabin, klima, VIN: 928231995 Speed: 40 km/h Automatic climate control Seat heating & seat ventilation Front axle hydraulically suspended Front: 1 double-acting spool valve Front linkage 7-pin socket Rear: Trailer hitch system (sliding), WITH hitch jaw K80 PTO shaft 1000/540E 4 double-acting spool valves Crodsvybyyspfx Aiweg Air pressure connectors (red & yellow) Power supply 7-pin IsoBus Load Sensing Tyres: Front: 650/65 R 34 Rear: 710/75 R 42 Subject to change, prior sale, and errors excepted. This description serves for general vehicle identification and does not constitute a guarantee in the legal sense of warranty law. The description in the sales contract is binding. Our offer is generally provided without a new roadworthiness (TÜV) inspection. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may feature advertising stickers and/or livery. Our general terms and conditions of delivery and payment apply.

Durum: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline Cedpjiu Er Aefx Aiwsrg - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durum: ikinci el, azami yük ağırlığı: 34.500 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2025, bir sonraki muayene (TÜV): 05/2026, yükleme alanı uzunluğu: 12.200 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 320 mm, Üretim yılı: 2025, Donanım: ABS, 2-axle low loader / low-bed trailer with full equipment First registration: 05/2025, new vehicle Overall length: 13,065 to 17,565 mm (single telescopic extension of 4,500 mm, extendable in 500 mm increments) Fifth wheel height: 1,200 mm Standard low-bed length: 6,650 mm Low-bed length extended: 11,150 mm Gooseneck length: 3,650 mm Rear axle assembly length: 2,765 mm Loading height at rear axle assembly only 845 mm LOADING HEIGHT LOW-BED only approx. 300 mm (loaded) Gross technical weight: 50,000 kg Technical fifth wheel load up to 26,000 kg Technical axle load: 24,000 kg Unladen weight: 15,500 kg Chassis: 3-coat paint finish Removable gooseneck with external main frame Central lubrication system for the front section plus one for rear section All axles forced hydraulic steering GIGANT axles with drum brakes WABCO trailer EBS with roll stability support RSS WABCO smartboard PENDLE AXLES with hydraulic suspension, 600 mm stroke RADIO REMOTE CONTROL Crjdsw A Ekmopfx Aiweg Tyres: 9x 245/70 R 17.5 Continental E-hydraulics 24 V Wide-load package 10 pairs of foldable loading platform extensions, each 225 mm 3 pairs of CONTAINER locking adapters, for accepting either a 40ft or 20ft container Drop side superstructure on saddle platform Drive-on ramps for the low-bed platform 5 pairs of pivoting lashing rings, 10,000 daN lashing capacity in the low-bed 4 pairs of stake pockets in external frame 3 pairs of pivoting lashing rings on rear assembly 1 pair of lashing rings in rear underrun bar, LC 6,000 daN RENTING is the new BUYING — available immediately for rental or full-service leasing.

Durum: ikinci el, yakıt türü: dizel, ön lastik ölçüsü: 6.00-19, arka lastik boyutu: 12.4R52, toplam yükseklik: 2.000 mm, toplam uzunluk: 3.000 mm, toplam genişlik: 1.000 mm, Kilometre sayacı: 999 km Lastik profili: %25 Ön aks: Lastik ölçüsü: 6.00-19; Yönlendirilir Arka lastik ebatları: 12.4R52 Dingil mesafesi: 180 cm = Firma Bilgileri = Sorularınızda her zaman depo numarasını belirtiniz (8 haneli) Smz Smeets & Zonen'da: - 1976'dan beri faaliyette, 65.000 adet satılmış/1700 adet yıllık/1000 adet stokta - A’dan Z’ye komple hizmet, taşıma desteği/ gümrük plakası organizasyonu (ekstra!) - En uygun fiyatla dünya çapında yükleme ve taşıma hizmeti Tüm yeni ve ikinci el parçalardan geniş stok: Csdpfx Ajv Ir T Hsiworg Her zaman en iyi fiyatlarımızla ilan veriyoruz Tam stok ve bilgi için bizi ziyaret edin 130.000 m2 arazi ve 20.000 m2 tam donanımlı depo ile sizi karşılıyoruz. Videomuzu izleyin

Durum: yeni, azami yük ağırlığı: 34.104 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, Further information here: Cjdpfx Aiov D Abgjwsrg

Durum: ikinci el, Üretim yılı: 1979, çalışma saatleri: 450 h, güç: 70 kW (95,17 bg), bir sonraki muayene (TÜV): 03/2027, Donanım: her tahrikli, kabin, ön bağlantı, * Deutz Intrac 2004 A-S * As-new condition * 1 previous owner * Classic vehicle with H registration (historic plate) * Tractor * Only 450 original operating hours * First registration: 10.05.1979 * TÜV valid until: 03/2027 * Gross vehicle weight: 5,100 kg * Unladen weight: 3,600 kg * Overall dimensions: 4,300 mm x 2,025 mm x 2,764 mm * Diesel engine * All-wheel drive * 51 kW / 70 HP * 3,744 ccm * 30 km/h top speed * Cab * Rear hydraulic system * Front hydraulic system * Rear PTO shaft 540/1000 rpm * Front PTO shaft 1000 rpm * Pneumatic brakes * Quick-attach triangle front + rear * Work lights front + rear * 3 double-acting hydraulic spool valves at the rear * 2 double-acting hydraulic spool valves at the front * Air suspension seat * Radio * 12 forward gears - 4 reverse gears * Heating * Full service history Cjdsvh Er Aepfx Aiwjrg ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We expressly reserve the right to prior sale, as this item is also being offered on other platforms. We strongly recommend viewing and inspection to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment, and are expressly desired!!! Images may show similar models and may include optional accessories available at additional cost. All stated internal measurements are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND TRADE DEALS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers permanently in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: