Kaessbohrer3 KONTEYNER ŞASİ, ÇOK FONKSİYONLU, TÜM BAĞLANTILAR MEVCUT, LİXT AKS

Kässbohrer 3 AS CONTAINERCHASSIS, MULTI FUNCTIONAL ALL CON...

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2024, süspansiyon: hava, lastik boyutu: 385/55/22.5, renk: diğer, Üretim yılı: 2024, Donanım: ABS, = Ek Seçenekler ve Aksesuarlar = - Hava süspansiyonu = Ek Bilgiler = Lastik ölçüsü: 385/55/22.5 Frenler: Disk frenler Süspansiyon: Hava süspansiyonu Arka aks 1: Kaldırma aksı Boş ağırlık: 5.450 kg Yük kapasitesi: 37.550 kg Toplam ağırlık: 43.000 kg Hasar: Yok Bodpfjz Dpkujx Ab Nodi Plaka: OV-48-HS

Durum: yeni, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, 3-axle MULTIMAX PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h legal Gross weight: 49,500 kg or 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin turning radius to rear approx.: 2,100 mm Coupling height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: (value not specified) Loading area width approx.: 2,540 mm Loading height at max load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if country-specific legal limits are exceeded. Technical Description Gooseneck: SNT design gooseneck to optimize loading platform length, approx. 3,900 mm length, with rear chamfer approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading area: Loading platform approx. 9,600 mm length with rear chamfer approx. 900 mm x 6°. Section after the gooseneck is hydraulically raisable/lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS Pair of two-section AXS steel ramps, approx. 4,920 mm long and 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically shiftable approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle as per technical datasheet: C470319. Maximum gradient at lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift/lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F). Braking system: WABCO EBS-E braking system per EU regulations. No cables to the tractor unit. Lighting system: 24V "ASPÖCK-NORDIK full LED" lighting per EU regulations (ASS 3). Metallisation: Complete HRM (High Resistance Metallisation). Full steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc / 15% aluminium). Painting – 6-stage finish: - Complete steel structure shot-blasted after welding - 1 coat zinc-based primer, 1 coat adhesion primer - Top coat with 2 coats 2K acrylic paint, single colour in RAL shade of choice - Cavity sealing with special wax - Rims in silver - Multicolour & special paint available at extra cost Steel structure: High-tensile fine-grain steels Types: S355J2+N/S355MC (yield stress 355 MPa), S690QL/S700MC (yield stress 690 MPa) Welders certified to DIN-EN 287-1, MAG welding per EN ISO 4063, M21 shielding gas as per EN ISO 14175. Front wall: Removable steel front wall, approx. 400 mm high. Supply connection strip for connections to tractor unit, fitted at outer frame profile height. Bdsdeizu Ntjpfx Ab Nei ASPÖCK-UNIBOX at the front supply strip with 24N, 24S & 15-pin sockets. - 24N connection per ISO-1185 - 24S connection per ISO-3731 - 15-pin connection per ISO-12098 If your pin assignment deviates from the ISO standard, please inform us. "Anderson" socket on front supply strip: Rema 78051-00 & Amp. 150 V. Cable for the supply of the electro-hydraulic power pack and/or electric winch (35 mm²,

Durum: yeni, boş ağırlık: 10.350 kg, azami yük ağırlığı: 39.150 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed built-in wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses equipped with 15 x 15 mm square climbing strips and lower-section extensions - 1 pair of fixed wheel recesses between the 1st and 2nd axle, approx. 1,610 x 970 x 400 mm - 3-part removable galvanized covers over wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the ramp and extending into the load area to accommodate an excavator bucket arm approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm depression (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Bedpfsiu Er Ajx Ab Nedi One-piece ALU ramps: - One pair of single-piece ALU ramps approx. 2,500 x 600 mm - Ramps with spring assist and manual lateral adjustment - Maximum load per pair: 24,000 kg Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 - TPMS (Tire Pressure Monitoring System) in compliance with ECE R 141 Accessories included: - One spare wheel with bracket in front of the bulkhead - 2" kingpin - One galvanized steel bulkhead ca. 400 mm high - Yellow-red air couplings at the galvanized front coupling strip - 4 chocks with bracket at the bulkhead - Accommodation at the rear of the gooseneck for ALU approach ramps - Galvanized extensions, extendable approx. 230 mm per side - Galvanized folding supports under the rear incline of the loading area - Bracket for a rotating beacon at the rear of the trailer - White reflector tape in accordance with EU requirements on sides, red on extension and rear - On the gooseneck and rear panel, bracket for warning boards including socket, left and right - On the gooseneck, plug-in ALU side walls and rear wall approx. 2,440 x 400 mm - Removable rear galvanized stanchions (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the load area for a 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area - One removable galvanized intermediate table with 1 pair WADER container pockets - 20 x 20 mm square climbing strips every 200 mm along the outer frame of the loading area's rear incline - Non-slip sand coating painted onto the checker plate on the gooseneck and loading area - Four warning boards extendable by approx. 400 mm each, approx. 423 x 423 mm with position light - Bracket for rotating beacon on warning boards - 80 km/h speed stickers on the rear and both sides - Load gauge for axle load determination including load chart - HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces metallically finished with ZINACOR 850 (Zinc 85% - Alu 15%) hot metalized

Durum: yeni, kilometre: 4 km, güç: 355 kW (482,67 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, frenler: retarder, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, Üretim yılı: 2026, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, park ısıtıcısı, Specifications: * FAN XG 480 multi-change system 1120-1320 with tail lift * Front chassis design: Aero floor plate * Air-suspended cab * Laminated glass with sun protection film * Central locking system, 3 keys, 2 remote controls * Windscreen with sun protection film * Exterior sun visor * Two LED headlights for cab rear wall * Reversing camera with pre-wiring for 2nd camera * DAF Corner View * Grab handle, surround, and side panel in cab color * LED headlights, cornering and fog lights * Fixed cab entry * XG cab * LED skylights * LED daytime running lights * Adjustable roof spoiler for XG cab * Lower cab step: Crystal White * Mirror housing in black for cab color Crystal White * Chassis color anthracite grey * CRYSTAL WHITE * Headlamp surround color: Crystal White * Bumper color: Crystal White * Roof spoiler color: Crystal White * Electrically operated roof hatch * Integrated auxiliary air-conditioning system * Driver’s seat: Luxury Air * Preparation for compressed air device * Passenger seat: cinema & table, fabric upholstery * Driver’s seat, swivel base * Xtra Comfort mattress for lower bunk * Upper bunk * Automatic cab climate control * Refrigerator and drawer * Armrests on both sides of the driver’s seat * Storage compartment with drawer in centre console * LED interior lighting: luxury * ECAS remote control with extended functions * Interior trim color: Exclusive * Dashboard table * Steering wheel with silver accents * Cab interior decor: Hexagon * Safety net on both bunks * Curtains, without divider curtain * Dashboard design: Plateau * Auxiliary heater with heat pump and timer * Wireless charger * Speakers: Exclusive * Digital tachograph, VDO version G2V2A * Speed limiter setting 90 km/h * PACCAR Connect with navigation * Antennas: radio, 2x mobile, GNSS Extra: CB * FMS connector, extended and pre-installed * Infotainment including DAF Truck Navigation * Adaptive Cruise Control with FCW and AEBS-3 * Predictive Cruise Control * Preparation for toll collection * Driver Performance Assistant * Reversing warning system * Lane change warning system * Hill start assistant * DAF Side and Turn Assist * Electronic stability control (VSC) * Speed limit detection * DAF drowsiness & distraction detection * Standard immobiliser * Automatic lift device operation * Front air suspension: medium * Front axle: 8.00 t, air suspension, 161 N * Rear axle load capacity 13.00 t * Trailing axle load 8.0 t * Load limiter 11.5 t * Axle load ratio 11.5/7.5 * Lifting device * Rear: 20.00 t, air suspension, SR1344 * Continental * F1, 315/70R22.5CGW CEPS5 158/150 L Steering ABA 3P * R1, 315/70R22.5CGW CEPD5 154/150 L Traction ACA 3P * R2, 315/70R22.5CGW CEPS5 158/150 L Steering ABA 3P * Wheel trim rings silver grey * Tire pressure monitoring system * Steel disc wheels, silver grey * Urge-to-move function * Mechanical differential lock * Traction aid 15.0 t * MX-13 engine, 355kW/483hp, cab badge: 480 * Emission standard Euro 6 * Standard transport, full version * Eco-fuel * Idle shutdown automatic, 5 minutes Bjdpoy A Uvfsfx Ab Nodi * Automated gearbox, TraXon, 12 speeds * Automated gearbox with manual shift – full version * Rear axle ratio 2.21 * Traction control system (ASR) * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 * ZF Intarder * 2-cylinder compressor with clutch * Driven rear axle with disc brakes * Pneumatic control for parking brake * Wheels

Durum: yeni, Üretim yılı: 2023, Donanım: her tahrikli, Haulotte Compact 10DX – New Machine Delivery time: on request Color: Haulotte Standard (RAL1006) Delivery to your desired address is possible. Working height: 10.28 m Platform height: 8.28 m Maximum load capacity: 565 kg Bdjdpfx Abemv Natj Nsi Platform length: 2.45 m Platform length with extension: 3.7 m Platform extension: 1.2 m Platform width: 1.45 m Transport height: 1.59 m Height when retracted: 2.44 m Width: 1.78 m Length: 3.17 m Wheelbase: 1.84 m Standard features: * Four-wheel drive, steerable front wheels * Free-wheel function on drive motors * Foam-filled all-terrain tires * One-sided platform extension 1.2 m * Removable control panel on the platform * 3° inclination sensor * Automatic outrigger levelling * Horn * Hour meter * Batteries 12 V – 74 Ah * Hydraulic brakes * Manual emergency lowering * Lashing points for fall protection * Towing and lifting eyes * Side guards Additional options: * Non-marking tires * Power outlet on the work platform * Swing door * Hydraulic generator 3.5 kW * Biodegradable hydraulic oil * Cold climate kit * Telematics preparation* * Audible drive alarm * Drive warning signal * Rotating beacon * Work lights * Foldable guard rails* * Custom paint (RAL) *Only available ex works, cannot be retrofitted to stock machines. 24 months manufacturer’s warranty on labour and spare parts.