Kullanılmış Fliegl 3-Achs Schubbodenauflieger 92M³ satın al (40.779)

Durum: yeni, azami yük ağırlığı: 26.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Vehicle / Body: Low-bed semi-trailer First registration: New vehicle Gross weight: 35,000 kg / 47,000 kg Unladen weight: 8,900 kg Payload: 26,100 kg / 38,100 kg Overall length: 13,300 mm Loading length: 9,200 mm Width: 2,520 mm Loading height: 900 mm Nlodpfxsut Idnj Aidef Further information: Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions (not in combination with forced steering) 24 t 2-speed landing gear, single-side operation, straight base, without load equalizer Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width mudflap at rear Mudflaps with antispray in front of the 1st axle and behind each axle, in accordance with EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable widening to 3,000 mm (not applicable to rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks on neck, transverse at front 70 mm wooden planks for extension to 3,000 mm Excavator arm recess starting over rear axles up to the rear, approx. 3,000 mm long, approx. 650 mm wide, approx. 230 mm deep 2 pairs of lashing holes rated to 5 t each in the excavator arm recess, lateral on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear slope Lashing points low-bed trailer: 11 pairs of lashing mushrooms recessed on top and side of external frame, each rated to 10 t 2 x on gooseneck 9 x distributed on low-bed area 2 pairs of lashing eyes front on gooseneck, each rated to 5 t 3 pairs of swivel lashing eyes on the gooseneck, each 5 t 2 pairs of folding lashing eyes additionally recessed in low-bed area, each 10 t 1 x at the start of low-bed area 1 x at the end of the rear slope 1 pair prepped on gooseneck slope for 6.7 t bolt lashing eye (JDT) 8 pairs of ring lashing eyes recessed in the external frame, each 5 t (convertible to stanchion pockets) 1 pair of bolt lashing eyes each 6.7 t (JDT), with large flange plate incl. thread as counterholder Axles & Suspension: SAF or BPW drum brake axles, at manufacturer's discretion "Axle/chassis laser alignment" reduces tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light and additional locking function on vehicle via push button Air suspension Wheels and tires: 235/75 R 17.5" At manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system: 2-line air brake system Color-coded hose layout for easy servicing Spring-actuated parking brake 24 Volt EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractor units that ensure functioning ABS! 2 mistake-proof coupling heads at front, without connecting line With lift & lower valve Axle load detection via EBS-CAN bus signal, for display in cab, truck must be pre-equipped, not installed on truck (not a calibrated scale) Vehicle stability control system Tire pressure monitoring system to ECE R 141, display via tractor unit display, via EBS, not installed on truck (requirements must be met by the truck) Electrics: 24 Volt, multi-chamber lamps, lateral yellow LED lighting Side yellow LED lights linked to indicator "flashing side marker lights" 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mistake-proof sockets at front, without conn

Durum: ikinci el, azami yük ağırlığı: 28.560 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2023, bir sonraki muayene (TÜV): 03/2026, yükleme alanı uzunluğu: 12.032 mm, yükleme alanı genişliği: 2.352 mm, yükleme alanı yüksekliği: 2.698 mm, yükleme alanı hacmi: 68 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2023, Donanım: ABS, FLIEGL 3-Axle Fixed Container Chassis with High-Cube 40 FT Container First registration: 2023 Permissible total weight (technical): 38,000 kg Nlodpfsvzk Najx Aidsf Chassis tare weight: 3,640 kg High-Cube container tare weight: 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with traction aid Equipped with vehicle driving stability system Axle load detection 6x 385/55 R 22.5 tyres 40 FT high-cube container with the right side wall designed as doors (multi-wing), door dimensions L 2,340 x W 2,585 mm Rear portal doors Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm Volume: 68 cbm Fits 25 Euro pallets Accessible with pallet truck and forklift Condition: A1 RENTING is the new BUYING – also available from us as full-service rental.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 5.100 kg, azami yük ağırlığı: 33.900 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 12.000 kg, izin verilen dingil yükü (dingil 2): 12.000 kg, izin verilen aks yükü (aks 3): 12.000 kg, yükleme alanı uzunluğu: 9.325 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.750 mm, yükleme alanı hacmi: 40 m³, toplam uzunluk: 10.300 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.230 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Özel Taşıma Çözümü Fliegl aracınızı taleplerinize göre yapılandırın. Görüntülenen araç bir örnektir. Üretim ve donanım müşterinin isteklerine göre bireysel olarak gerçekleşir. *Şasi Treyler Kipper* İnce taneli çelikten, kaynaklı yapı, Temel hafif yapı, Değiştirilebilir 2" kral pimi bulunan treyler plakası Kavisli ön panel "Patentli" 24 tonluk, 2 kademeli destek vinci, tek taraflı kullanım, yarım dairesel alt parçalı ve düz bağlantı plakalısı, yük dengeleyicili Teker takozları ve tutucu Yan çarpma koruması alüminyum Alt koruma, katlanabilir Yarım kabuk çamurluklar Entegre "çamurluk tutucu", taşları geri püskürten yüzey Sadece son aks üzerinde antispray çamurluk 1 yedek lastik için tekerlek tutucu, jant sabitleme setli Yedek lastik, ana lastikle aynı marka, çelik jant Plastik alet kutusu, çekmeceli ve raflı, b=650 / y=520 / d=670 mm, asma kilit ile kilitlenebilir Branda çubuğu ve tutucusu Arka çekme kancası *Aksonlar ve Süspansiyon* 430 mm disk çapında disk fren aksları Off-road tipte akslar "Aks/şasi lazer ölçümü" - Lastik aşınması ve yakıt tüketiminde azalma Havalı süspansiyon 1. aks otomatik kaldırma aksı, zorunlu indirme ve kalkış desteği dahil, "3x frenle" devreye girer (Kalkış desteği, aks yükü %30 aşılana kadar ve max. 25 km/sa hıza kadar çalışır) "Sıcak daldırma galvanizli kaldırma aksı mekanizması" - Paslanmaya karşı 10 yıl garanti *Fren Sistemi* 2 hatlı basınçlı hava fren sistemi Kolay bakım için renk kodlu tesisat Yay depolu el freni Önde 2 karıştırılamaz bağlantı başlığı Elektronik fren sistemi EBS, ön tarafta EBS soketi Kaldırma ve indirme valfi ile Araç denge kontrol sistemi Otomatik devrilme alçaltması, kesme vanalı *Tekerlekler ve Lastikler* 385/65 R22.5" çelik jant, fabrika gümüşü *Elektrik* 24 Volt, çok odacıklı LED arka stop lambaları, yanlarda sarı LED aydınlatma, LED plaka aydınlatması (Not: bazı çekici araçlarda fonksiyon doğru olsa da arıza uyarısı çıkabilir) 2 adet önde beyaz pozisyon lambası LED 2 adet arkada beyaz/kırmızı hat lambası LED Önde 2 x 7 pin ve 1 x 15 pin karıştırılamaz soket, bağlantı kablosuz Ekstra LED çalışma lambaları arka kısımda gömme *Hidrolik* Düşük basınçlı silindir max. 170 bar, en küçük kademe sert krom kaplama, HDK vidalı soketli sabit parça, NW 48 mm Kamyona bağlı yan tahrik ile hidrolik kumanda Njdpfx Aijzhgp Sodjlf Hidrolik bağlantı hortumu ve HDK vidalı bağlantı (NW = 48 mm), tırtıllı somunlu *Damlalar* Yüksek kaliteli, aşınmaya dayanıklı alüminyum kasa damper Eğimli ön panel 5 mm kalınlığında, dıştan silindir bağlantısı Yan paneller 30 mm boşluk profilli, düzgün kaynaklı, dökme malzeme tutmayan üst profil. İçte ön bölümde tırmanma Kürek ve fırça tutucu ön dış duvarda Greenline - konik ve aerodinamik damper şekli "Membran" tip arka kapak Arka kapak - Çift menteşeli sarkaç kapak, dışta, çift kancalı kilitleme Arka kapak lastik conta Orta taneli kapak Taban 6 mm kalınlıkta, yekpare Yükselme platformu ve tırmanma, hava/elektrik ve fren bağlantısı için geniş ulaşım alanı Yan doğru sağa katlanan tek taraflı rulo branda

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 8.000 kg, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.330 mm, yükleme alanı yüksekliği: 1.950 mm, yükleme alanı hacmi: 50 m³, toplam uzunluk: 11.200 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.470 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, Özelleştirilmiş Taşıma Çözümü Fliegl aracınızı gereksinimlerinize göre yapılandırın. Görseldeki araç bir örnektir. Üretim ve donanım, müşterinin isteğine göre bireysel olarak gerçekleştirilir. *Şasi Çekici Damper İnce taneli çelikten kaynaklı hafif yapı, hafif bükümlü gövde, değiştirilebilir 2" kral pimi bulunan kingpin plakası 24 tonluk, 2 kademeli destek ayakları, tek taraftan kumandalı, yarım dairesel alt parça ve düz bağlantı plakası 2 adet takoz ve tutucu Alüminyum yan koruma Katlanabilir alt koruma Yarım kabuk çamurluklar Entegre "çamurluk braketi", taş tutmayan yüzey Sadece son aks üzerinde antisprey çamurluk 1 branda borusu ve tutucu Yaklaşık 3.550 mm alüminyum merdiven, yan braketli Arka tarafta 2 çekme halkası Şasiye yanda tente kirişi tutucu *Akstanlar + Süspansiyon SAF disk frenli akslar, 430 mm disk çapı "Aks/şasi lazer ölçümü" ile lastik aşınması ve yakıt tüketimi azaltılır Havalı süspansiyon 1. aks otomatik kaldırılabilir, ek olarak kamyondan elektrikli kontrol edilebilir, zorunlu indirme ve kalkış yardımcısı dahil "Ateşe dayanıklı galvanizli kaldırılabilir aks mekanizması" - Paslanmaya karşı 10 yıl garanti *Fren Sistemi 2 hatlı basınçlı hava fren sistemi Kolay servis için renkli boru döşemesi Yay tipi park freni Ön tarafta 2 karıştırılamaz bağlantı başlığı, bağlantı hattı yok 24 Volt EBS, Elektronik Fren Sistemi (önde EBS soketi, bağlantı kablosu olmadan) Dikkat: Römork yalnızca ABS işlevini sağlayan çekici araçla çekilmelidir! Kaldırma & indirme valfiyle Aracın sürüş stabilite sistemi Otomatik eğim indirme valfiyle Aks yükü algılama EBS-Canbus sinyali ile, sürücü kabininde ekranda gösterim için, kamyon buna uygun olmalıdır *Lastikler ve Jantlar 385/65 R22.5" lastikler, üreticiye göre marka Çelik jantlar, fabrika gümüşü "TPMS" ECE R 141'e uygun lastik basınç izleme sistemi, çekici aracın ekranında gösterim, EBS üzerinden *Elektrik 24 Volt, çok bölmeli lambalar, yanlarda sarı LED aydınlatma Yanda sinyalle bağlantılı sarı LED aydınlatma, "yan sinyal lambaları" Önde 2 beyaz LED pozisyon lambası Arkada 2 beyaz/kırmızı şerit takip lambası Önde 2 x 7 pinli ve 1 x 15 pinli karıştırılamaz priz Arkada entegre edilmiş 2 ek LED çalışma farı *Hidrolik Düşük basınç silindiri maks. 170 bar, en küçük kademe sert kromajlı, HDK vidalı manşon, sabit kısım, NW 48 mm Hidrolik kumanda: kamyonun PTO (yardımcı tahrik) üzerinden Hidrolik bağlantı hortumu ve HDK vidalı fiş NW = 48 mm, tırtıllı somunlu *Dumper/Kasa Yüksek aşınma dayanımlı HB 400 çelikten çelik kutu kasa, eğimli ön duvar, dıştan hidrolik silindir yuvası. Sağda rulo branda için katlanır alüminyum koruma sacı. Ön duvarda dışta kürek ve süpürge tutucu. İçte önde çıkış yeri. Yan duvarlar sürekli 4 mm kalınlıkta, taban sürekli 5 mm kalınlıkta Nedpfx Aezhgkieidslf "Membran" arka duvar Arka duvar 2 kanatlı kapı bölümü 1/2'ye 1/2, sağ kanatta 1 kaydırıcı Dışta döner çubuk kilit ve altta mekanik kilitleme ile Basamaklı platform, hava/elektrik ve fren için bağlantı sacı, maksimum çalışma alanı için geniş boşluk Sağda katlanabilir tek taraflı rulo branda, solda merkezi kilitli

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902037031, boş ağırlık: 4.795 kg, azami yük ağırlığı: 30.320 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.040 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, renk: gri, These images are sample archive photos! Vehicle may still be in operation! Fine-grained steel welded construction, in Basic lightweight design, fifth wheel plate with replaceable 2" king pin, Curved front wall – patented 24-ton 2-speed landing gear, operable from one side, with semi-circular lower part and straight mounting plate, with load compensation Wheel chocks with holder Foldable underrun protection Semi-shell mudguards Integrated 'mudguard bracket', stone-repellent surface With anti-spray splash guards only on the last axle Tarpaulin rod with holder Tow hook at the rear (not with Revolution) Axles & Suspension SAF disc brake axles with 430 mm disc diameter Nodpfsy Rrpljx Aidelf 'Axles/chassis laser-aligned' – reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation ``3x braking'' (starting aid works up to 30% axle overload and at speeds up to max. 25 km/h) 'Hot dip galvanized lift axle mechanism' Braking System 2-line compressed air braking system Color-coded line arrangement for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting lines 24 Volt EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: This trailer may only be towed by towing vehicles that ensure ABS effectiveness! With lift & lowering valve Vehicle stability system Automatic tipping lowering with shut-off valve 'TPMS' Tire Pressure Monitoring System, display via monitor in towing vehicle, via EBS, not installed in the truck (requirement must be present in the truck. Only for standard tires) Wheels and Tires 385/65 R22.5 Steel rims Electrics 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED (Note! Certain towing vehicles may show error messages, even though the lighting functions correctly) Side yellow LEDs integrated with indicators ('flashing side markers') 2 front white position lights in LED 2 rear white/red lane markers in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Additional LED work light integrated in the rear, switched via reverse light Hydraulics Low-pressure cylinder max. 170 bar Operated hydraulically via truck PTO Tipping Body Aluminum box-type tipper body made from high-quality, wear-resistant material Sloping front wall, 5 mm thick, with external cylinder mount Side walls made from 30 mm hollow chamber profiles, cleanly welded, with top rail profile designed to repel bulk material. Interior with climb assist at the front wall (not in conjunction with Cramaro cover) Shovel and broom holder on the outside at the front wall Greenline – conical and aerodynamic tipper body design 'Membrane' rear wall Rear wall as swing tailgate with 'double-hinge', externally mounted with double hook lock Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, mounting plate for air/electrics and brakes, with ample free space for best possible operability Roll tarp, stowable on passenger side, with central locking on driver’s side Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard-chromed piston rod to prevent damage and rust caused by materials.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902027997, boş ağırlık: 6.832 kg, azami yük ağırlığı: 28.168 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2021, yükleme alanı uzunluğu: 13.460 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.740 mm, toplam uzunluk: 15.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, renk: siyah, The images are archival photos; the vehicle may still be in use. Nedswk Dg Nepfx Aidolf Equipment details available on request.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902024321, boş ağırlık: 5.765 kg, azami yük ağırlığı: 29.235 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2018, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.470 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, renk: siyah, The images are archive photos; the vehicle may still be in use! Specifications available upon request! Nsdpfxowk Dk Ij Aidolf

Durum: ikinci el, boş ağırlık: 5.905 kg, azami yük ağırlığı: 33.095 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2024, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 13.620 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.800 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, Üretim yılı: 2024, Donanım: ABS, Alman aracı Neredeyse yeni, sadece yaklaşık 30.000 km. İlk tescil: 06.05.2024 Fliegl SDS 390 Roadrunner Azami toplam ağırlık: 39.000 kg Boş ağırlık: 5.905 kg Net taşıma kapasitesi: 33.095 kg BPW akslar I-Lock Blitz tente Lastik ölçüsü: 385/65 R 22,5 Branda yazılı, fotoğraflar rötuşlanmıştır Ek hizmetler mümkün! İhracat plakası (Kırmızı / 30 gün) Almanya Kısa süreli plaka (Sarı / 5 gün) Almanya Avusturya sevkiyat plakaları temin edilebilir Nedpfjynkikjx Aidjlf Araç teslimatı (ücrete tabidir) İnternette verilen bilgiler bağlayıcı olmayan açıklamalardır ve garanti edilmiş özellikler değildir. Satıcı, yanlışlıklar, yazım hataları veya veri iletim hatalarından sorumlu değildir. Ara satış hakkı saklıdır. Satış sadece ticari müşterilere yöneliktir. Yalnızca genel satış şartlarımız geçerlidir.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: Produktpalette, boş ağırlık: 5.400 kg, azami yük ağırlığı: 33.600 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.960 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5", lastik durumu: 100 yüzde, Özel Taşıma Çözümü Fliegl aracınızı ihtiyaçlarınıza göre yapılandırın. Gösterilen araç bir örnektir. Üretim ve donanım müşteri talebine göre bireysel olarak gerçekleştirilir. *Şasi İnce taneli çelik kaynaklı yapı, hafif inşaat, değiştirilebilir 2. king pimi ile yarı römork tablası Kavisli ön panel, patentli Orta teleskopik destek, yükleme ile birlikte park etmek mümkün değildir, park halinde araç geriye doğru eğimli olmalıdır. Takozlar + tutucu Katlanabilir arka alt koruma Yarım kabuk çamurluklar Entegre çamurluk tutucu, taş sıçramasını önleyici yüzey Asfalt tipi, son aksın arkasında sıçrama lastiği; menteşeyle çamurluğa bağlı, üstte çamurlukta asma imkanı, çamurluk kısaltılmış Arka çekme kancası *Dingiller & Süspansiyon 430 mm disk çapına sahip disk fren aksları Dingil/şasi lazer ölçümü ile lastik aşınmasının ve yakıt tüketiminin azaltılması Arazide kullanım için akslar Hava süspansiyonu 1. aks otomatik kaldırma aksı, zorunlu alçaltma ve kalkış yardımı dahil Alevle galvanizlenmiş kaldırma aksı mekanizması *Fren sistemi 2 hatlı pnömatik fren sistemi, kolay servis için renkli boru döşemesi Yaylı park freni Önde 2 karıştırmaya karşı emniyetli bağlantı başı, bağlantı hortumu olmadan EBS (Elektronik Fren Sistemi) ile önde EBS soketi, bağlantı kablosu olmadan Dikkat: Römork, sadece ABS etkinliği sağlayan çekiciyle çekilmelidir! Kaldırma & indirme valfi ile Araç sürüş stabilite sistemi *Jant & Lastikler 385/65R22.5 Çelik jant, fabrika gümüşü ECE R 141'e uygun TPMS, gösterge çekicide display üzerinden, EBS üzerinden, kamyon kurulumu olmadan *Elektrik 24 Volt, çok odacıklı lambalar, yanlarda sarı LED aydınlatma sinyalle entegre, 'yan sinyal lambaları' Önde 2 beyaz pozisyon lambası Arkada 2 beyaz/kırmızı şerit takip lambası Önde 2 adet 7 pinli karıştırmaya karşı emniyetli priz, bağlantı kablosu olmadan *Hidrolik Maks. 250 bar yüksek basınç silindiri, HDK vidalı bağlantı, sabit parça, NW 48 mm Kamyon PTO üzerinden hidrolik kumanda *Dampers HB 400/450 yüksek aşınma dayanımlı çelikten Stone Master tasarımlı dairesel çelik dampa. Dıştan bağlı hidrolik ile eğik ön duvar, ön duvarda çıkış ve yükseliş erişimi Membran arka kapak Arka kapak sarkaç kapak olarak, dışarıda 2 kancalı kilit ile. Kenarlarda altta iki mandallı kelepçe. Yan duvarlar tüm uzunlukta 4 mm kalınlıkta, taban 4/5 mm kalınlıkta, aşınma ve ağırlığa göre optimize edilmiş yapı Dampa izolasyonlu olarak, Fliegl Asphalt Profi Thermo modeli, ön, yan, alt ve arka izolasyonlu, Fliegl Isotherm ile. BASIC kapak, branda kaplama. Platform ve çıkış merdiveni, havalandırma/elektrik ve fren için büyük kullanım kolaylığı sağlayan bağlantı plakası. Sağ tarafta tek taraflı açılır rulo branda, sol tarafta merkezi kilitleme *Kayıt Ülkesi / Plakalar Almanya Nodpfx Aoi Rix Ieidelf EC 2007/46'ya göre onay EN 12642'ye göre üstyapı dayanıklılığı 7/24 servis hattı RS 10 - 2013'e uygun termal araç üretici sertifikası Tek satır plaka tutucu için hazırlanmış ECE - 70'e uygun uyarı tabelası *Boya Şasi: DB 7350 Novagrau '10 yıl paslanmazlık garantisi' Destek ayakları: galvanizli Dampa/yan branda: talebe göre RAL tek renk Rulo branda: RAL 7035 açık gri Termoizolasyon ayrıca BASICplus (sac kaplama) ve Premium (paslanmaz çelik kaplama) olarak da mevcut!

Durum: ikinci el, Fonksiyonellik: sınırlı işlevsellik, boş ağırlık: 6.575 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 9.000 kg, izin verilen dingil yükü (dingil 2): 9.000 kg, izin verilen aks yükü (aks 3): 9.000 kg, ilk tescil: 07/2011, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.300 mm, toplam uzunluk: 13.650 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5, lastik durumu: 30 yüzde, dingil mesafesi: 1.360 mm, Üretim yılı: 2011, Donanım: ABS, Kullanılmış açık yarı römork Nledpfxoy Ercbj Aidsf Uzun demirler için çentikli çelik ön duvar Taban çelik profillerle güçlendirilmiş Yanlarda dikme cepleri Takma dikmeler için depo kutusu

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34002026856, boş ağırlık: 5.592 kg, azami yük ağırlığı: 29.408 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: beyaz, The images are archive photos! The vehicle may currently be in use! Chassis semi-trailer for forwarding companies Fine-grain steel welded construction in reinforced Scandic design, fifth wheel plate with interchangeable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for attachment of lashing straps Lashing rings for use in the "Load-Lock profile", each rated at 6 t, loose 24 t 2-speed landing gear, one-sided operation, with straight base, without compensation Free swing radius to landing leg approx. 2200 mm, landing leg dimensions approx. 2350 mm 2 wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of galvanized steel Quarter-shell mudguards before and after axle assembly with anti-spray mudflaps only on the last axle 1 plastic toolbox, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 1 pair of stanchion pockets integrated into the outer frame/floor right at the front, 83 x 83 mm internal dimensions 2 plug-in stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Notice: Stanchion pockets/plug-in stanchions are not designed to solely secure long materials, pipes, etc. without lashing around cargo 4 pairs of ferry lashing rings, marked yellow Axles & Suspension 3x BPW drum brake axles "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 reverse polarity-proof coupling heads at front, no interconnecting pipe EBS by Wabco Premium, electronic braking system with EBS socket at the front, no connection cable, Wabco Premium incl. open CAN BUS for telematics Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of ABS! with Raise & Lower valve Vehicle stability system Electrics 24 Volt, multi-chamber LED lights with resistors, yellow LED side marker lights, license plate lighting in LED (Note! With certain towing vehicles, diagnostic errors may occur, even if functionality is assured) 2 white position lights at the front 2 white/red boundary marker lights at the rear Nlsdpfox Rq Sljx Aidjf 2 x 7-pin reverse polarity-proof sockets at the front, no connection cable Front bulkhead / front corner posts 2 steel corner posts, 580 mm high, volume version, release device for side curtain at front bulkhead "Crash-blocker", inner lower steel impact guard at about 140 mm height Plug-in slats Rows of wooden plug-in slats Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Floor Birch plywood approx. 30 mm thick, fitted on longitudinal crossmembers for high point load capacity, forklift axle load up to max. 7100 kg Note: Floor warping due to weather exposure possible (no warranty)! Rear wall / rear corner posts Rear corner posts up to underside of roof, provision for curtain mounting with round tube and curtain tension ratchet Swing doors at the rear, double wing, each with 2 internal locking rods Roof Sliding roof, rear high-lift end flap, sliding from rear to front, tarpaulin color: white Optimal rain gutter at the rear, at the end bow above the doors Registration country / plates Germany Approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, sides white and rear red

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT34202036640, boş ağırlık: 6.213 kg, azami yük ağırlığı: 35.787 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2025, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.600 mm, yükleme alanı hacmi: 27 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.310 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", renk: sarı, The images are archive photos; the vehicle may still be in use! Fifth Wheel Height approx.: 1200 mm Chassis - Tipper Semi-Trailer Basic lightweight design, fifth wheel plate with replaceable 2" kingpin, patented curved front section. Foldable underrun protection with spring assistance for easier operation. Integrated mudguard bracket with stone-repellent surface. Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axles/chassis laser measured, reducing tire wear and fuel consumption. Air suspension. First axle is a self-lifting axle with forced lowering and starting aid, activated by pressing the brake three times (starting aid operational with axle overload up to 30% and max. 25 km/h). Braking System 24 Volt EBS electronic braking system with front EBS socket (without connecting cable), external test port for brake cylinder pressure at EBS module, with lift & lower valve. Paver brake, electric control from the truck without truck installation. Automatic tipper lowering with shut-off valve. TPMS (Tire Pressure Monitoring System) according to ECE R 141, display in tractor unit via EBS (truck must be pre-equipped, only monitors standard tires). Axle load detection via EBS CAN-bus signal, display in cab (truck must be pre-equipped, no installation required). Wheels and Tires 385/65 R22.5 steel rims Electrics Side yellow LED lights linked to indicators (flashing side marker lights). Two front white position lights in LED, two rear white/red lane marker lights in LED. Side-mounted LED work lamps on both sides, two additional LED work lights recessed in rear section. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection). Operation hydraulically via truck PTO. Bodies Steel round body with "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior access at the front wall. Greenline – conical and aerodynamic body shape. "Membrane" tailgate – hydraulic rear flap with large upward opening, approx. 2200 mm clearance height. Side walls continuous 5 mm thick; floor continuous 8 mm thick. Insulated body version – Fliegl Asphalt Profi Thermo, front, side, bottom, and rear insulated with Fliegl Isotherm. "Flip Top sliding cover" with automatic rear closure (folding framework). Cover is pre-assembled forward, electrically operated with 7-pin plug at front (charging socket) without connecting cable, no truck installation. Operable on the trailer and via remote control. Operating Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible but may not be achievable depending on cargo while observing legal axle, support, and fifth-wheel loads (poor driving and tracking may occur due to incorrect weight distribution). Paintwork Frame – DB 7350 Nova Grey "10 years corrosion warranty" Nledpfx Aisyylapsdsf Support legs – Black coated Body – RAL 1007 Narcissus Yellow Tarpaulin – RAL 7038 Agate Grey

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33802032235, boş ağırlık: 4.983 kg, azami yük ağırlığı: 33.017 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2022, yükleme alanı uzunluğu: 13.990 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1.120 mm, toplam uzunluk: 13.990 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 385/55 R22.5", lastik durumu: 100 yüzde, renk: açık yeşil, Note: The images are archive photos! The vehicle may still be in use! Chassis for Container Semi-trailer Njdpfeww Iczjx Aidelf Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin and two kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush with rear Locking positions in new design for improved fifth wheel load on 20 ft flush at rear Rear lighting system protected and integrated into the rear end Central telescopic beam, 1st stage, rear extension extended 1st stage: 2 x 20 ft or 1 x 40 ft without gooseneck tunnel Central telescopic beam, 1st stage, rear extension extended 1st stage: 1 x 40 ft with gooseneck tunnel Central telescopic beam, 2nd stage, rear extension extended 2nd stage: 1 x 45 ft with gooseneck tunnel and rear overhang Central telescopic beam, 2nd stage, front extension extended 1st stage, rear extension extended 2nd stage: 1 x 45 ft with long gooseneck tunnel and beveled corners, central telescopic beam as an interlocking central tube frame with bolt locking Transport of filled tank containers is excluded. With rear height adjustment in galvanised version and folding central supports for containers without tunnel Detachable front container guides Front crossmember with latest Vario V3+ New Generation locking system Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t, 2-speed landing gear, single-sided operation, straight base, without compensating stroke 2 wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Rear underrun protection extendable for 45 ft containers Rear splash guards, full width (not in combination with forklift holder) Half-shell mudguards With anti-spray splash guards according to EU regulations Rear impact protection Spare wheel holder for 1 wheel with fastening kit 1 toolbox for fire extinguisher up to 6 kg 1 fire extinguisher (ABC powder 6 kg)

Durum: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902032084, boş ağırlık: 4.140 kg, azami yük ağırlığı: 33.860 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam uzunluk: 8.600 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.240 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, renk: beyaz, Attention: The images shown are archive photos; the vehicle may still be in use! Alcoa Dura-Bright aluminium rims Nodpfxewhfiyo Aidolf Air suspension 1st axle with automatic lift axle function, including forced lowering and auxiliary lift function, actuation via “3x braking” (auxiliary lift is operational up to 30% axle overload and up to a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" with a 10-year warranty against rust-through. Electrics 24 Volt, multi-chamber tail lights, lateral yellow LED lighting 2 white front position lights 2 white/red rear marker lights 1 x 15-pin socket at the front, without connection cable 2 additional LED work lights, recessed and integrated at the rear, activated via the reverse gear signal Hydraulics High-pressure cylinder, max. 250 bar; smallest stage hard-chromed; with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Removed from the vehicle to be claimed Hydraulic actuation via truck PTO Hydraulic connection with hose and HDK screw coupling NW = 48 mm with knurled nut Bodies / Tipping Body Aluminium box body made of premium, abrasion-resistant material. Slanted front wall, 5 mm thick, with external cylinder mount. Sidewalls constructed from 30 mm hollow-chamber profiles, precisely welded, featuring a bulk material-repelling upper edge profile. Interior access at the front wall (not in combination with Cramaro). Shovel and broom holder mounted externally on front wall. Greenline – tapered and aerodynamic body shape "Membrane" rear wall Rear wall as swinging tailgate with “double-joint hinge”, externally mounted with dual hook locking system. Tailgate with rubber sealing. Note: Heat resistant up to max. 170°C! Continuous 6 mm thick floor Standing platform with access ladder, connector plate for air/electrics and brakes with ample free space for optimal accessibility. Roll tarp, stowable on the passenger side, with central locking on the driver’s side.

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014232, boş ağırlık: 5.900 kg, azami yük ağırlığı: 29.100 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2025, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.638 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", renk: gümüş, The images shown are archive photos! The vehicle may currently be in use! Chassis: Semi-Trailer for Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Drive-over and loadable with construction/agricultural machinery up to a maximum gross weight of 24,000 kg and up to a maximum machine width of 2,480 mm (the track width of machines or vehicles to be transported must not exceed 2,200 mm); hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame slightly angled, new design with "Load-Lock profile" for lashing strap attachment 14 pairs of lashing eyes additionally recessed into the outer frame, each rated at 2.5 t 6 pairs of lashing eyes recessed into the outer frame, each rated at 5 t 24 t, 2-speed landing gear, operated from one side, with straight base, without force equalizer Clear support foot dimension or free swing radius to the rear approx. 1920 mm Folding rear support 2x wheel chocks with holders Aluminium side underrun protection Steel rear underrun guard Quarter shell mudguards in front of and behind each axle With anti-spray mudflaps behind each axle 1x spare wheel holder for 1 spare wheel, incl. wheel fixing kit 1x spare wheel, same make as main tire set, steel rim Axles and Suspension SAF drum brake axles "Axle/chassis laser aligned" reduces tire wear and fuel consumption Air suspension 1st axle is a self-lifting axle, also operated electrically from the truck, incl. forced lowering and start assist, without truck installation (start assist operational up to axle load limit of 30% and up to a speed of 25 km/h max.) Brake System 2-line compressed air braking system Color-coded routing for easy servicing Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line 24 Volt EBS (Electronic Braking System) with EBS socket at the front, no connection cable Note: This trailer must only be towed by vehicles that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System as per ECE R 141, display in the towing vehicle via the EBS, without truck installation (requirement must be met in the truck, only fits main tire set) Nlsdpfx Aijxb D Swjdef Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volts, multi-chamber tail lights, LED side marker lights (yellow) LED yellow side marker lights synchronized with turn signals (flashing side markers) 2 white position marker LEDs at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, no connection cable Floor Approx. 30 mm phenolic resin plywood, for high point loads, rated for forklift axle loads up to max. 5,600 kg Front wall / Corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts in high-volume steel version Front wall additionally lined on the inside with 1,250 mm high phenolic resin plywood Chassis hot-dip galvanized The images shown are archive photos! The vehicle may currently be in use!

Durum: yeni, azami yük ağırlığı: 16.920 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.200 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 900 mm, toplam genişlik: 2.550 mm, Toplam ağırlık: 24.000kg/ 30.000kg Boş ağırlık: 7.080kg Taşıma kapasitesi: 16.920kg/ 22.920kg Toplam uzunluk: 10.825mm Yükleme uzunluğu: toplam 8.200mm Genişlik: 2.5250mm Yükleme yüksekliği: 900mm Njdpfxjzhhw De Aidjlf Ek bilgiler Nakliye ve depo teslim hazırlık ücreti ayrıca alınır, Wiesmoor 26639 adresinden; 1.280,00 € / Net Şasi Alçak Yataklı Römork Çelik kaynaklı konstrüksiyon Kuvvetli döner tabla ve bilyalı döner halka ile, depolama kutusu döner tabla önünde gömülü Katlanabilir arka destek 2 takoz ve tutucu Yandan çarpmaya karşı koruma, alüminyum Tüm genişlik boyunca arka çamurluk (forklift tutucu ile birlikte değil) 1. aks önünde ve arkasında çeyrek kabuk çamurluklar, ikinci ve üçüncü akslar için anti-sprey çamurluklar 1 stepne tutucu, 1 yedek lastik için, lastik montaj seti ile 1 plastik alet kutusu, b=600 / y=425 / d=460 mm, kilitlenebilir Genleşme; arka kısım hariç toplamda 3.000 mm'ye çekilebilir. (Taşınacak iş makinesi veya aracın iz genişliği dış çerçeve genişliği 2.550 mm'yi geçmemelidir) Yükleme alanı ortasında ahşap takoz bölmesi Genişletme için 70 mm ahşap takoz, 3000 mm'ye uzatılabilir Alçak yatak sabitleme halkaları Önde zemine entegre 3 çift (her biri 10 ton) bağlama noktası Dış çerçeveye gömülü üstte ve yanda 6 çift (her biri 10 ton) bağlama mantarı 1x boyun bölgesinde Diğerleri aralarında dağılmış 1x arka eğim dış çerçeveye gömülü 5 çift halka tipi bağlama gözü, her biri 5 ton (direklere dönüştürülebilir) 3. aksın arkasındaki alçak yatak zeminine gömülü ek 1 çift katlanır bağlama gözü, her biri 10 ton Öndeki köşelerde 1 çift vidalı bağlama gözü, her biri 6,7 ton, geniş flanş plakası ve dişli karşı tutucuyla birlikte Döner tabla bağlantı mekanizmalı römork çekişi Test edilmiş 40 mm çekme halkalı çeki kirişi Akslar + Süspansiyon Üretici tercihe göre kampanalı fren aksları “Aks / Şasi lazer ölçümü” Lastik aşınması ve yakıt tüketimini azaltır Kaldırma ve indirme valfli havalı süspansiyon Fren sistemi 2 hatlı basınçlı hava fren sistemi Kolay servis için renkli boru döşemesi. Yay depolu park freni Önde yanlış bağlantıya karşı korumalı 2 bağlantı başlığı, çekiciye bağlanır 24 Volt EBS, Elektronik Fren Sistemi, önde EBS fişi ile, bağlantı kablosu dahil Dikkat: Römorklu taşıt yalnızca ABS işlevini sağlayabilen çekicilerde kullanılmalıdır! EBS-Canbus sinyali ile aks yükü tanıma, sürücü kabini ekranında gösterim için, uygun donanımlı kamyon gereklidir, kurulu ağırlık ölçer yoktur Araç - Sürüş Stabilite Sistemi 'EBS üzerinden ekranda gösterim, yalnızca ana lastik ile' ECE R 141'e göre 'RDKS' lastik basınç izleme sistemi, LKW’de gerekli altyapı olmalıdır Tekerlekler ve Lastikler 235 / 75 R 17,5" Lastik tercihi üreticiden Çelik jantlar ikili düzende, fabrika gümüşü Elektrik aksamı 24 Volt, çok odacıklı lambalar, yanda sarı LED aydınlatma Yanda sinyalle entegre sarı LED sinyal lambaları Önde 2 beyaz pozisyon lambası Arkada 2 beyaz/kırmızı şerit lambalar 2 x 7 pinli yanlış bağlantıya karşı korumalı fiş önde, bağlantı kabloları dahil 1 LED döner tepe lambası, park lambası ile devreye girer (lamba çıkarılabilir) 2 çift uyarı tabelası, çift LED ışıklı ve 3.000mm'ye uzatılabilir Taban Ön bölüm çelik taban Daha sonrasında yaklaşık 70 mm yumuşak ağaç zemin, tekerlek yuvası alanında çelik tırtıklı sac kaplama Arka eğim kısmında 70 mm yumuşak ağaç zemin Alçak yataklı alan dahil arka eğim toplamda 8.200 mm Rampa Çelik rampalar, 3.000 mm uzunluğunda, 750 mm genişliğinde, yana kaydırılabilir Ek...

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014072, boş ağırlık: 7.300 kg, azami yük ağırlığı: 27.700 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.530 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.330 mm, süspansiyon: hava, lastik boyutu: 385/65 R 22,5", lastik durumu: 100 yüzde, renk: gümüş, Chassis, Semi-Trailer, for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, main frame reinforced for a central load of 25 tons over 3 m loading length when retracted. 13 pairs of hooks, welded to crossmembers for lashing strap attachment 23 pairs of recessed lashing rings in outer frame, each rated for 3.5 tons 24-ton, 2-speed support winch in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel carrier for 1 spare wheel 1 storage compartment for insert stakes, open, with a socket option behind front wall for storage / or compartment for storage between the extended longitudinal beams 4 pairs of stake pockets recessed in the outer frame, for box section stakes 80x80 mm 5 stake pockets recessed centrally in the floor, for box section stakes 80x80 mm, with reinforcement beams, installed between the outer stake pockets except one 6 lashing/stake rails recessed transversely in the floor, over the full width up to the outer frame (max. usable inside width between the outer insert stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing approx. 60 mm (of the round steel). Bottom features angle bracket closure, half open downward. For lashing and staking 80 x 80 mm posts Rear pull-out ladder, passenger side 5 x 3 pairs of stake pockets recessed in longitudinal beams outside, for 80x80 mm box sections, including reinforcement beams 10 lightweight insert stakes, 80 x 80 mm, usable height approx. 1850 mm, hot dip galvanized, with welded-on lashing rings on both sides at the bottom 2 plastic toolboxes, W=600 mm / H=425 mm / D=460 mm, lockable Nsdpfeza Dyyex Aidolf Telescoping: Extendable by max. 4000 mm and lockable every approx. 500 mm Main frame telescopic Locking with pneumatic pin locking system + frame locking status indicators on both sides, activation via manual button, operation for brake/locking and suspension on left side in front of axles Storage compartment between longitudinal beams when extended Axles & Suspension: SAF disc brake axles, 430 mm brake disc diameter Rear axle self-steering, with automatic reversing lock via reverse light and additional manual lock on the vehicle via push button Axle spacing staggered 1310/1410 mm Air suspension 1st axle with automatic lift axle, also electrically controllable from the truck, with traction aid Brake system: 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front Wabco EBS, Electronic Brake System with EBS socket at the front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be pre-equipped) Wheels and Tyres: 385/65 R 22.5" steel rims Electrical System: 24-volt, multi-chamber lights, yellow LED side marker lights 2 white front position LEDs 2 white/red rear marker LEDs 2 x 7-pin and 1 x 15-pin mistake-proof sockets at the front 1 revolving beacon with holder, controlled via parking light 2 pairs of LED warning boards illuminated and extendable to 3500 mm Flashing side marker lights Side 7-pin sockets: 2x at front wall, 2x at landing gear, 2x at rear end plate 1 additional 7-pin socket in rear underrun guard 2 additional LED work lights mounted inside at the front wall, with external switch on left front side Anti-slip phenolic plywood flooring approx. 30 mm thick 25 mm aluminium hollow section, 1950 mm high, corner posts i

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33901014200, boş ağırlık: 6.700 kg, azami yük ağırlığı: 28.300 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı yüksekliği: 900 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.500 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, renk: gri-siyah, Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with exchangeable 2" kingpin Outer frame in a new, slightly angled design with “Load-Lock profile” for lashing strap attachment 24 t. 2-speed landing gear, single-side operation, with straight lower part, without compensating slide Free landing gear foot distance or free rear swing radius approx. 1,920 mm 2 wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter shell mudguards in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-spray, EU-compliant 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable. (Lock not included) Axles & Suspension SAF drum brake axles "Laser measured axles/chassis": reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle including forced lowering and starting aid, operation via "3x braking" (starting aid function active up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tire damage Braking system 2-line compressed air braking system Color-coded line routing for easy service Spring-actuated parking brake 2 anti-mix coupling heads at the front, without connecting line EBS, electronic braking system with front EBS socket, without connecting line Attention: The trailer may only be towed by tractors which ensure effective ABS operation! Nsdpfx Aoza A Txoidjlf With raise & lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin anti-mix sockets at the front, without connecting lines Floor Approx. 30 mm thick phenolic resin-coated plywood, high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, steel corner posts in volume design Country of registration / plates Germany With Dekra inspection certificate (in accordance with §13 EG – FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paint Frame: DB 7350 Nova grey Front corner posts: hot-dip galvanized Front wall: aluminum

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33902028859, boş ağırlık: 5.660 kg, azami yük ağırlığı: 29.340 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, toplam uzunluk: 13.700 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.700 mm, süspansiyon: hava, lastik boyutu: 385/65 R22,5", lastik durumu: 100 yüzde, renk: kırmızı, Chassis semi-trailer for forwarding/logistics Steel welded construction in reinforced design, only 2 longitudinal beams as double-T beams with steel/chequer plate between the beams, fifth wheel plate with replaceable 2" king pin. Rear light protection fender. 8 pairs of lashing eyes bolted or welded to the frame, at the manufacturer’s discretion 24-ton, 2-speed landing gear, single-side operation, with straight base, no sliding compensation Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, hot-dip galvanized steel Half-shell mudguards with anti-spray flaps according to EC regulations 1 spare wheel holder for 1 spare wheel, with wheel mounting kit 1 toolbox recessed between the longitudinal beams 8 timber stakes as per manufacturer’s choice, bolted to the frame, each with 2 telescopic timber uprights extendable from 1800 mm to 2800 mm, 7 tons per pair Axles & Suspension BPW disc brake axles with 430 mm disc diameter Air suspension with lift & lower valve, safety cable on the axles 1st axle is an automatic lift axle including forced-lowering and starting aid, operated by “3x brake application” (the starting aid functions up to 30% axle overload and up to max. 25 km/h) Axle spacing offset 1410/1310 mm (suitable for combined transport), up to 44 tons gross train weight Wheels and Tyres 385 / 65 R 22.5" Manufacturer’s choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Axle load detection via EBS CAN bus signal, display in cab (the truck must be pre-equipped, not installed on the truck, not a calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer must only be towed by vehicles that ensure the effectiveness of the ABS! "Safe Parking" Nedpoza Anvofx Aidslf Electrical System 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable Front bulkhead/corner stanchions Steel/mesh bulkhead, approx. 2,300 mm high, bolted to frame Approval / Plates Country of registration: Germany Approval in accordance with EC 2007/46 Prepared for single-line number plate holder Outline marking with reflective tape as per ECE R 048, white on the side, red at the rear Warning signs as per ECE-70 Paintwork Frame: DB 7350 Nova grey Landing legs: black coated Front bulkhead: hot-dip galvanized

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33801013475, boş ağırlık: 7.180 kg, azami yük ağırlığı: 28.820 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.850 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", lastik durumu: 100 yüzde, renk: gümüş, multiple units available. Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, additional spray guard as sheet metal riveted underneath the floor, at the neck area above the rear axle of the tractor unit as well as above the wheels on the vehicle, chassis in reinforced design for vehicle loading up to the outer frame, outer frame with 'Load-Lock profile' approx. every 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on the top/outside of the outer frame, each rated at 10 t, 24 t 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with transverse compensator, folding rear support, wheel chocks with holders, aluminium side underrun guard, steel rear underrun protection, quarter shell fenders before and after each axle, with additional sheet metal spray guard above the wheels, EG-compliant anti-spray mud flaps, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locks, 4 pairs of lock recesses integrated into the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container lock adapters (additional cross supports at the front and rear of the container are required, the container must rest evenly along its width in conjunction with the locks, cross supports are not included in the delivery), loading edge for approach ramps at the full width of the rear extension, mechanical hand-crank rear extension extendable by approx. 1,500 mm, lockable every 500 mm, incl. extendable rear underrun protection with lighting. Lane area fitted with Lohr anti-slip grating, steel chequer plate in the center, integrated storage compartment for ramps in rear extension (usable only when rear extension is extended by approx. 1,000 mm); for transporting ramps with the rear extension retracted – ramp storage compartment in FR-right located in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approx. 8,165 kg, mounted centrally at the very front, operated via radio remote control, cable length 35 m x approx. 10 mm, with roller fairlead and removable guide rollers. Axles & Suspension: SAF/BPW drum brake axles, manufacturer’s choice, air suspension, first axle lift axle, additionally electrically operated from the truck, including forced lowering and starting aid. Braking system: 2-line compressed air braking system, color-coded line installation for easy service, spring-actuated parking brake, 2 foolproof coupling heads at the front, EBS (Electronic Braking System) with front EBS socket, without connecting cable, with raise & lower valve with quick release, holding function in lowered position + auto-reset function, vehicle stability control system, axle load detection via EBS CAN bus signal. Nlodpfx Aioza Aiyedsf Wheels and tyres: 235/75 R 17.5" manufacturer’s choice, steel twin wheels. Electrics: 24 volts, multi-chamber LED lights, side yellow LED lighting, LED license plate lighting, 2 white LED position lights at the front, 2 white/red LED lane marking lights at rear, 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with bracket, operated via parking light, 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, 1 additional 7-pin socket (according to ISO 1724) in the rear underrun protection, 2 LED work lights at the sides (1 FR-left, 1 FR-right). Floor: Lohr anti-slip flo

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT33903000364, boş ağırlık: 6.120 kg, azami yük ağırlığı: 28.880 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2022, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5", renk: gümüş, Attention, the photos shown are archive images! The vehicle may currently be in use! Weights and Dimensions: Permissible / Technical gross weight: 35,000 / 39,000 kg Permissible / Technical payload approx.: 28,880 / 32,880 kg Permissible / Technical aggregate load: 24,000 / 27,000 kg Permissible / Technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (base version) approx.: 6,120 kg +/- production tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, Fifth-Wheel Haulage: Fine-grained steel welded construction, fifth-wheel plate with replaceable 2" king pin Low bed telescopic extension by approx. 1,500 mm, lockable every 500 mm Slightly sloped new version of outer frame with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for lashing strap attachment, integrated into the cross member below the outer frame 24 t 2-speed landing gear, single side operation, straight base, without load equalizer Clear support foot corner or free rear swing radius approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/ stake pockets recessed transversely in the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, vertical distance approx. 60 mm. Bottom with angle plate as stopper, half open downwards. For lashing and inserting 80 x 80 mm stakes (3 pairs in the neck, 6 pairs in the low bed area). 3 pairs of stake pockets integrated in the outer frame, approx. 72 x 42 mm internal measurement Axles & Suspension: Drum brake axles per manufacturer's choice "Laser-measured axles/chassis" for reduced tire wear and fuel consumption Air suspension Brake System: 2-line compressed air brake system Color-coded lines for easy servicing Spring-type parking brake 2 foolproof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting lead Note: The trailer may only be towed by tractor units that ensure effective ABS operation! With raise & lower valve Vehicle driving stability system Wheels and Tires: 235/75 R17.5, brand at manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side-mounted yellow LED lighting (inset) 2 white front position lights 2 white/red lane marker lights at the rear Nedpfxsy Slhqe Aidslf 2 x 7-pin foolproof sockets at front, without connecting lead 1 additional LED work light at the rear, controlled via reversing light Floor: Phenolic plywood, approx. 30 mm thick, high point load capacity for forklift axle load up to max. 5,600 kg Front wall / front corner posts: 25 mm aluminum hollow section, 1,350 mm high Country of Registration / Plates: Germany Inspection and certificate in Bosnia 24/7 Service hotline Prepared for single-line license plate holder Contour marking with ECE R 048 reflective tape, white on the sides and red at the rear Warning plate as per ECE - 70 Paintwork: Frame: hot-dip galvanized incl. passivation "15-year anti-corrosion warranty against rust-through" Front corner posts: hot-dip galvanized Front wall: aluminum

Durum: ikinci el, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 13.650 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly tapered with 'Load-Lock profile' for attaching tie-down straps 24 t 2-speed landing gear, single-sided operation Aluminum side underrun protection Galvanized steel rear underrun guard Quarter shell mudguards in front of and behind the axle assembly With anti-spray mud flaps according to EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fastener kit Axles & Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser alignment" reduces tire wear and fuel consumption 1st axle with automatic lift, additionally electronically controllable from the truck cab Includes forced lowering and start aid, no truck installation required Brake System 2-line compressed air brake system Spring-loaded parking brake Wabco EBS electronic braking system with EBS socket at the front, without connection cable With lift & lower valve plus auto-reset function Vehicle stability control system Axle load detection via EBS can-bus signal, output to display Wheels and Tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red track marker lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable-proof sockets at the front, no connection cable 2 additional LED work lights at the rear, switched via reverse gear Nlsdpfxsri Hihs Aidjf Floor Approx. 30 mm phenolic plywood floor, on longitudinal cross-members for high point load resistance, suitable for forklift axle loads up to 7100 kg at the front wall Stakes 5 rows of aluminum V-stakes 2 pairs of Vario steel stakes, in combination with Vario beams for forward and backward load securing; the aluminum stakes are omitted in the area of the steel stakes Rear portal doors, double-leaf with 2 internal rod locks each Tarpaulin with welded horizontal and vertical straps Unladen weight: 5,960 kg Offer and images non-binding

Durum: yeni, azami yük ağırlığı: 29.500 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.200 mm, yükleme alanı genişliği: 2.350 mm, yükleme alanı yüksekliği: 1.450 mm, yükleme alanı hacmi: 25 m³, toplam genişlik: 2.550 mm, Vehicle is from ongoing production – available in approx. 2 weeks Vehicle / Body: Tipper body Gross weight: 35,000 kg / 39,000 kg Unladen weight: 5,500 kg!!! Payload: 29,500 kg / 33,500 kg Overall length: 8,600 mm Volume: 25 cbm Further information: - Overall height approx. 3,160 mm - Internal width approx. 2,350 mm - Fifth wheel height approx. 1,200 mm Chassis for tipping semi-trailer: - Fine-grain steel welded construction, basic lightweight design - 1 central landing leg - Folding underrun protection - Underrun protection with 'spring assistance' for easier operation - Half-shell mudguards - Integrated 'mudguard bracket', stone-repellent surface - Antispray mudflaps only on rearmost axle - 2 towing eyes at the rear Axles and Suspension: - SAF disc brake axles with 430 mm disc diameter - 'Axles/chassis laser alignment' to reduce tire wear and fuel consumption - Axles in off-road specification Nljdpfx Aiovhyf Redef - Air suspension - Air spring pressure gauge mounted at front on curved chassis - 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, without truck installation (starting aid operates up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Braking System: - 2-line compressed air brake system, color-coded piping for easy servicing - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting lines - 24-volt EBS electronic braking system with EBS socket at front, no connecting cable - With lift and lower valve - Vehicle stability control system - Automatic tipper lowering with shut-off valve Wheels and Tires: - 6 x 385/65 R22.5", European brand, manufacturer’s choice Electrics: - 24-volt, multi-chamber lights in LED, amber side LED lighting, license plate LED lighting (Note: certain towing vehicles may display diagnostic errors despite proper function) - Amber side LED lighting linked with the indicator, 'flashing side marker lamps' - Premium LED side marker lamps, each with 20 LED diodes - 2 white front position lamps (LED) included - 2 rear white/red lane marker lamps (LED) included - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cables - Side LED work lights, both sides (switched via reverse light) - 2 additional LED work lights recessed at the rear Hydraulics: - High-pressure cylinder, max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm - Brand: Hyva - Hydraulic operation via truck PTO - Hydraulic connection with hose and vehicle screw connector NW = 54 mm with large wing nut Body: HARDOX steel round body in 'Stone Master Design' made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Integrated access at the front wall. - Greenline – conical and aerodynamic body shape - Shovel and broom holder on external front wall - 'Membrane' rear wall - Rear wall as pendulum tailgate with 'double-joint hinge', external mounting with double hook locking. 2 clamping screws with toggle fasteners at lower sides - Rear wall with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous 4 mm side walls, 4/5 mm floor, wear and weight-optimized design - Fliegl S.T.E.P. – swiveling front standing platform with foldable access ladder for side entry on front-left

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, From ongoing production Total weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900kg / 23,900kg Overall length: 10,890mm Loading length: 8,670mm total, 2,520mm gooseneck, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information: - Steel welded construction - Turntable with robust slewing ring - Folding rear support - Chocks with holder - Aluminium side underrun protection - Full-width rear mudflap (not in combination with forklift bracket) - Half-shell mudguards on 1st axle with anti-spray mudflaps - Anti-spray mudflaps behind 2nd and 3rd axles - Plastic toolbox - Extendable width to 3,000mm - Central storage compartment for wooden planks on the loading area - 70mm wooden planks for extension to 3,000mm - Lashing eyes low bed - 1 pair of lashing cutouts recessed in the front longitudinal beam on the gooseneck, each rated at 10 tons - 4 pairs of lashing holes in the external frame of the gooseneck, each rated at 5 tons (for attaching lashing straps) - 7 pairs of lashing mushrooms inserted on top and side of the external frame, each rated at 10 tons - 1x on the gooseneck, 6x in the low bed - Pair of ring lashing eyes recessed in the external frame, each rated at 5 tons (convertible to stake pockets) - Additional pair of folding lashing eyes, each rated at 10 tons - 1x on the gooseneck - 1x recessed in the floor behind the last axle Towing device/trailer turntable: - Drawbar with certified 40mm eye - Drawbar height adjustable by spring Axles & suspension: - Drum brake axles, manufacturer’s choice - "Laser-measured axles/chassis": reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels & tyres: - 235/75 R 17.5'' - Manufacturer’s choice - Twin steel rims, factory silver Braking system: - Two-line air braking system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at the front, with connecting lines to towing vehicle - 24V ABS and ALB, with ABS plug at the front, incl. cable Electrics: - 24V, multi-chamber lights, yellow LED side lighting - 2 white position lights at the front - 2 white/red clearance marker lights at the rear - 2x 7-pin non-interchangeable plugs at the front, with cable Njdpfx Ajuytx Seidelf - LED beacon with bracket, operated via parking lights (removable beacon) - Pair of warning boards double LED-lit and extendable to 3,000mm Floor: - Gooseneck front with steel / checker plate covering - Storage compartment recessed in the transition slope to the gooseneck - Then approx. 70mm softwood floor, with steel/checker plate covering in wheel arch areas - Rear bevel with 70mm softwood floor - Low bed area including rear bevel 6,500mm Access ramps: - Steel ramps, 2,800mm long, 750mm wide, laterally adjustable - Additional ramp securing, foldable below (prevents lateral shifting of the ramps; not compatible with hydraulic ramp shifting) - Wood covered (tip portion with steel/checker plate) - Hydraulic via tractor PTO with throttle, operation at left front side - Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Painting: - Frame hot-dip galvanized incl. passivation - Ramps hot-dip galvanized Plus delivery/preparation from stockyard 26639 Wiesmoor: €1,280.00 net

Durum: yeni, azami yük ağırlığı: 17.900 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.670 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 860 mm, toplam genişlik: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle completely hot-dip galvanized Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 6,500 mm recessed deck incl. rear bevel / 2,170 mm step deck Width: 2,520 mm Loading height: 860 mm Further information Plus pre-carriage / handling ex stock 26639 Wiesmoor: €1,280.00 net Hire-purchase offer: Term 48 months, down payment VAT only, residual value 40% Monthly rate: €569.00 Steel welded construction Turntable with heavy-duty ball bearing ring Foldable rear support Chocks with bracket Aluminum side underrun protection Full-width rear spray flaps (not in combination with forklift holder) Half-shell mudguards on the 1st axle with anti-spray flaps Anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable width up to 3,000 mm (not in the rear bevel) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Tiedown points low-loader 1 pair of tiedown recesses in the main frame at the front of the step deck, each 10 t 4 pairs of lashing holes in the outer frame of the step deck, each 5 t (for lashing strap hooks) 7 pairs of lashing pins recessed in and on the side of the outer frame, each 10 t 1 at the front on the step deck 6 in the low-bed recessed deck First lashing point 250 mm from the front and the last max. 250 mm from the rear, spacing of lashing points not greater than 1,100 mm 5 pairs of ring lashing eyes recessed in the outer frame, each 5 t (convertible to stake pockets) 2 pairs of additional foldable lashing eyes, each 10 t 1 on the step deck (protruding) 1 recessed in the floor behind the last axle Drawbar/trailer running gear Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & suspension Drum brake axles, manufacturer’s choice "Laser-measured axles/running gear" for reduced tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235 / 75 R 17.5" tires, manufacturer’s choice Twinned steel rims, factory silver Braking system Two-line air brake system Spring-loaded parking brake Vehicle stability system Nlodpfx Aev D T R Eoidef Axle load detection via EBS CAN bus signal, for display in driver's cab—truck must be suitably equipped, no installation on truck (not a calibrated scale) 2 foolproof coupling heads at front, with connecting lines to tractor unit 24 V EBS, electronic braking system with EBS connector at front, with connecting cable Note: The trailer may only be towed by vehicles that guarantee the effectiveness of ABS! Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin foolproof connectors at front, with connecting cable 1 LED beacon with bracket, controlled via position light (removable beacon) 2 pairs of warning panels, double LED illuminated, extendable to 3,000 mm Floor Front step deck with steel/chequer plate surface Storage compartment recessed in transition to step deck Then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide,