Kullanılmış Langendorf Low-Bed Semi-Trailer / 2024 / 46 T Load satın al (63.692)

Durum: ikinci el, makine/araç numarası: XMR0SD00080000675, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, toplam uzunluk: 13.100 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 1.400 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2008, Özel taşımacılık Alçak şasi (Dorseli): ✓ Uzayabilir: ✓ Depo Yakıt: ✓ = Daha fazla bilgi = Lastik ölçüsü: 245/70 R17.5 Tedpfsu H Ai Hox Ad Nja Aks markası: Saf Frenler: Kampanalı frenler Süspansiyon: Havalı süspansiyon 1. Aks: İkili lastik; Sol dış lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %70 2. Aks: İkili lastik; Sol dış lastik diş derinliği: %90; Sağ dış lastik diş derinliği: %85 3. Aks: İkili lastik; Direksiyonlu; Sol dış lastik diş derinliği: %50; Sağ dış lastik diş derinliği: %70 Azami toplam ağırlık: 45.000 kg Plaka: C270710 = Firma bilgileri = Bu araç hakkında daha fazla bilgi için lütfen arayın: veya e-posta gönderin: . Tüm stoklarımızın genel görünümü için: . Her hafta stok güncellemelerimiz için bültenimize abone olmayı unutmayın.

Durum: ikinci el, makine/araç numarası: ***YAMT13XX6K0104043, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2019, toplam uzunluk: 13.800 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.410 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: diğer, Üretim yılı: 2019, Chassis Chassis height: 87 cm Kingpin / Fifth wheel diameter: 2 inch Kingpin / Drawbar height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading deck length: 930 cm Ramp length: 395 cm Gooseneck length: 415 cm Low-loader: ✓ Maximum width: 300 cm (25 cm per side) Maximum length: 1380 cm Extendable: ✓ Tank Fuel: ✓ = Further information = Axle configuration Tyre size: 235/75 R17.5 Axle brand: SAF Tsdju H D R Ejpfx Ad Nsa Brakes: drum brakes Suspension: air suspension Axle 1: twin tyres; left outer tyre tread: 60%; right outer tyre tread: 60% Axle 2: twin tyres; left outer tyre tread: 20%; right outer tyre tread: 30% Axle 3: twin tyres; steering; left outer tyre tread: 55%; right outer tyre tread: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Functional Body manufacturer: Faymonville Loading platform height: 87 cm Identification Registration number: C505325 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, makine/araç numarası: ***XMROVB00090000123, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2009, toplam uzunluk: 16.750 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 2.600 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2009, Chassis King Pin Diameter / Fifth Wheel: 2 inch Structure Coupling Height: 120 cm Special Transport Length Over Axles: 1185 cm Loading Floor Length: 1185 cm Gooseneck Length: 420 cm Low Loader: ✓ Maximum Width: 250 cm Maximum Length: 4315 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle Configuration Tjdpou H Itqsfx Ad Noa Tyre Size: 245/70 R17.5 Axle Manufacturer: BPW Eco Brakes: Drum Brakes Suspension: Air Suspension Axle 1: Twin Tyres; Steering; Left Outer Tyre Tread: 30%; Right Outer Tyre Tread: 35% Axle 2: Twin Tyres; Steering; Left Outer Tyre Tread: 60%; Right Outer Tyre Tread: 60% Axle 3: Twin Tyres; Steering; Left Outer Tyre Tread: 55%; Right Outer Tyre Tread: 65% Axle 4: Twin Tyres; Steering; Left Outer Tyre Tread: 40%; Right Outer Tyre Tread: 30% Weights Gross Vehicle Weight (GVW): 65,000 kg Functional Body Manufacturer: Nooteboom Loading Platform Height: 125 cm = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durum: ikinci el, makine/araç numarası: WSM0000000525xxxx, Üretim yılı: 2021, Lütfen talep üzerine referans numarasını belirtiniz: 23840 Teknik Bilgiler: 3 dingil 9 tonluk dingiller Maksimum faydalı yük: 32.955 kg 1. dingilde kaldırılabilir dingil Yükleme kirişleri Havalı süspansiyon Thermo King soğutucu/dondurucu ünitesi Toplam çalışma saati: 20.314 Motor çalışma saati: 19.892 Lastikler iyi durumda İç uzunluk: 13,3 m İç genişlik: 2,5 m İç yükseklik: 2,8 m Hemen teslim Açıklama: Thermo King soğutucu/dondurucu ünitesi ile Schmitz soğutuculu dorse. Hemen teslim. TÜV: Evet AB onaylı: 13.10.2026'ya kadar Boş ağırlık: 9045 kg Toplam ağırlık: 42000 kg Yük kapasitesi: 32955 kg Genişlik: 260 cm Tedpszqqwfefx Ad Nja Uzunluk: 1404 cm Model: Cargobull Skapsemi soğutucu/dondurucu ünitesi ve yükleme kirişleriyle! = Daha fazla bilgi = Daha fazla bilgi için lütfen ATS Norway ile iletişime geçin.

Durum: ikinci el, makine/araç numarası: WSM0000000513xxxx, Üretim yılı: 2014, Please quote the reference number upon request: 23284 Specifications: - 3 axles - Lift axle on the 1st axle - For 33 pallets - Load securing bars - Carrier refrigeration/freezer unit - Air suspension Tedpezqpgrofx Ad Noa - Good tires - 9-ton axles - Available immediately Description: Schmitz box semi-trailer from year 2014. The trailer is equipped with a refrigeration/freezer unit and load securing bars. Available for immediate delivery. Technical Inspection (TÜV): Yes EU-approved until: 31.05.2027 Unladen weight: 9,476 kg Gross weight: 42,000 kg Payload: 32,524 kg Width: 2,600 mm Length: 14,000 mm Model: Skapsemi with cooling/freezing unit – Bommer = Further Information = Please contact ATS Norway for more information.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 13.000 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 50.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/1995, yükleme alanı uzunluğu: 13.300 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, renk: mavi, Üretim yılı: 1995, Donanım: ABS, Extendable low-bed De Angelis trailer, year 1995, payload up to 37 tons, 3 axles with air suspension, ABS, 2nd and 3rd axles steering, extendable chassis with a central extension of an additional 3.50 m, closed well of 5.0 m, ground clearance of 44 cm, removable axle cover, manual rear ramps, good condition, DEALER: INTERDRIVE SRL - PARMA Tjdpfxswa T T Rj Ad Nea

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 11.800 kg, azami yük ağırlığı: 25.500 kg, toplam ağırlık: 36.800 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/1998, yükleme alanı uzunluğu: 13.300 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: hava, lastik boyutu: 245.70 R 17.5, renk: kırmızı, Üretim yılı: 1998, Donanım: ABS, extendable low bed semi-trailer, 3 axles with 2nd and 3rd steering axles, air suspension, ABS, year 1998, low bed length 5.30 m with an additional 3.50 m extension, ground clearance 45 cm, removable module above the axles, adjustable detachable gooseneck, cable control for self-steering axles, good condition, DEALER INTERDRIVE SRL-PARMA Todowg E Rbjpfx Ad Nsa

Durum: ikinci el, boş ağırlık: 10.600 kg, azami yük ağırlığı: 39.400 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2024, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 760 mm, süspansiyon: hava, lastik boyutu: 205/65 R17.5, renk: gri, Üretim yılı: 2024, işletme ağırlığı: 10.600 kg, Donanım: ABS, Kuğu boynu: -30 mm kalınlığında sert ahşap kaplamalı kuğu boynu -Arka kısımda düz tasarımlı kuğu boynu -3 çift sabitleme halkası (LC 5.000 daN) Çekilebilir tasarımlı yükleme alanı: -Çekilebilir tasarımlı yükleme alanı -Dışa doğru katlanabilen 5 çift sabitleme halkası (LC 5.000 daN) -Dışa doğru katlanabilen 3 çift sabitleme halkası (LC 10.000 daN) Tjdpjw Adkxefx Ad Nea -Yükleme alanının önünde yatay konumda bulunan 1 çift sabitleme halkası (LC 10.000 daN) -Yükleme alanının dış çerçevesindeki, germe bantlarının takılması için oyuklar (LC 2.000 daN) -Yaklaşık 48 mm kalınlığında sert ahşap kaplama, aksların üzerinde tırtıklı sac kaplama Dingil destekleri: -24 ton kaldırma kapasitesi (50 ton test yükü) için 2 vitesli şanzımana sahip JOST dingil destekleri (mekanik) Dingiller ve lastikler: -BPW dingiller, iki dingil sabit, iki dingil takip direksiyonlu -Hava süspansiyonlu, tambur frenli, kaldırma/indirme fonksiyonlu -Takip direksiyonlu dingiller, elektro-manyetik geri vites kilidi ile geri vites veya manuel olarak etkinleştirilebilir -Lastikler 205/65 R17.5 Fren sistemi: -AB yönetmeliklerine uygun, EBS-E (4S3M) özellikli fren sistemi Çelik konstrüksiyon: -Yüksek mukavemetli, ince taneli çeliklerden yapılmış çelik konstrüksiyon -Çelik kaliteleri: -S355J2+N/S355MC (Akma dayanımı 355 MPa) -S690QL/S700MC (Akma dayanımı 690 MPa) Elektrik sistemi: -AB yönetmeliklerine uygun elektrik sistemi, aydınlatma 24 volt, ASPÖCK-NORDIK (ASS3) -Ön bağlantı çubuğundaki ASPÖCK-UNIBOX, 24N, 24S ve 15 kutuplu prizler Boya: -Standart olarak bilye ile püskürtülmüş kaynaklı şasiye uygulanan, iki bileşenli (2K) çinko tozlu astar ile garanti edilen, birinci sınıf ve dayanıklı korozyon koruması -Yüksek kaliteli, tek renkli (Novagrau) iki bileşenli (2K) üst kat boya Pakete dahil aksesuarlar: -Ön duvarın önünde bulunan, bir adet yedek lastik ve taşıyıcı -2" Kral pimi -Yaklaşık 400 mm yüksekliğinde, galvanizli çelik ön duvar -Ön galvanizli bağlantı çubuğunda sarı-kırmızı hava bağlantı elemanları -Ön duvarda bulunan, 4 adet tekerlek takozu ve taşıyıcı -Yükleme alanının eğiminin altında bulunan, galvanizli katlanır destekler -Römorkun arka kısmında, döner lamba için bir tutucu -Galvanizli, her iki tarafta yaklaşık 230 mm kadar uzatılabilen genişleticiler -AB yönetmeliklerine uygun, beyaz reflektör şeridi yanlarda, çekilebilir kısımda ve arkada kırmızı -Kuğu boynunda ve arka sacında, sol ve sağ tarafta, priz dahil olmak üzere uyarı levhaları için birer tutucu -Römorkun arkasında bir çamurluk -Römorkun arkasında, Avrupa reflektör levhaları (Kırmızı-Sarı) -USB bellekte kullanım kılavuzu ve açıklamalar -ECE R 141'e uygun TPMS lastik basıncı kontrol sistemi -Kuğu boynunda, yaklaşık 2.440 x 400 mm boyutlarında, takılabilir ALU yan paneller ve arka panel -Arka, galvanizli takılabilir çerçeveler çıkarılabilir, gövdenin uzunluğu yaklaşık 2.560 mm -7 çift WADER konteyner cebi -Yükleme alanında 1 adet 20 ft konteyner; yükleme alanında 1 adet 40 ft konteyner; kuğu boynunun üzerinde 1 adet 40 ft konteyner; 2 adet 20 ft konteyner -Yükleme alanının dış çerçevesinde, 100 x 50 mm boyutlarında, takılabilir çerçeveler için 7 çift çerçeve cebi -Ön dingilde, mevcut dingil yüküne ve mevcut yük durumuna bağlı olarak TEBS E aracılığıyla kontrol edilen, kaldırma aksı -Aracın arka kısmında, ALU dayama rampaları için kaydırılabilir bir takma çubuğu -Kuğu boynundaki ve yükleme alanındaki tırtıklı sacların üzerinde, kaymayı önleyici bir güvenlik önlemi olarak, boyanmış bir kum tabakası -Yaklaşık 400 mm kadar uzatılab

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 9.000 kg, azami yük ağırlığı: 29.000 kg, toplam ağırlık: 38.000 kg, ilk tescil: 08/2020, renk: kırmızı, Üretim yılı: 2020, ES-GE 2-Axle Lowbed, non-extendable, Tridec Steering Gross weight: 38,000 kg Axle load (2 x 10,000 kg): 20,000 kg Fifth-wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Loading platform length: approx. 13,200 mm Loading platform width: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing radius (tractor unit): approx. 2,100 mm Coupling height: approx. 1,150 mm B-dimension: approx. 12,000 mm Raised bed length: approx. 3,700 mm Raised bed loading height: approx. 1,480 mm Lowbed length: approx. 6,500 mm Lowbed loading height: approx. 250 mm Lowbed ground clearance: approx. 100 mm Loading height above axle assembly: approx. 3,000 mm Tractor unit details A-dimension: approx. 4,500 mm Coupling height: approx. 1,150 mm Swing radius: approx. 2,100 mm Chassis: - Chassis manufactured from high-quality fine-grain steels - Lowbed in rigid construction - Axle assembly not detachable - Without excavator trough Kingpin - 2" kingpin Landing legs - Without front landing gear Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each – brand: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, centralizing device - Axle spacing approx. 1,360 mm Suspension - Air suspension with lift and lower system - Second ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle steering - All axles steered, make "Tridec" Tyres - 9 tyres 245/70 R 17.5, load index 146/146 F – tyre brand: Continental - Steel rims Brakes - Dual-line air brake system according to EC directive, make "Knorr" - Automatic load-dependent brake force regulator - Operated via standard air couplings, red/yellow, acc. ISO 1726 - Electronic brake system (EBS), 7-pin socket acc. to ISO 7638, mounted at the front, acc. to EU regulations. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake with spring-loaded cylinder - 4 wheel chocks with holders - Without connecting hoses (Wendeflex) to tractor - Aluminium air tanks - TIMG2 (Trailer Information Module) installed for current axle load readout Rear underrun protection - Integrated into the rear end plate Side frame - Side frames made of UNP steel, approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, foldable outwards, mounted on the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing capacity in the rear area of the gooseneck, approx. 400 mm above the ground - 1 pair of lashing rings with approx. 13,400 kg tensile force at the rear of the lowbed at the vertical neck - 7 stake pockets per side on the inside of the outer frame for bolsters approx. 80x50x4 mm, evenly distributed along the loading platform - 6 stake pockets per side welded externally onto the longitudinal beam Floor Tjdpfx Adou U Np Tj Nsa - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Chequer plate (approx. 8/10 mm) above axle assembly Bulkhead - Designed as a toolbox with lid, approx. D 400 x H 450 mm, spanning the full width of the loading platform, corners chamfered Side panels - 3 removable, anodised side panels on the gooseneck, approx. 2,440 x 400 mm - Removable stanchions at rear, galvanized Finishing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and single-color coating in RAL 3002 flame red - Axles and landing gear KTL-c

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 4.100 kg, azami yük ağırlığı: 34.900 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2019, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: siyah, Üretim yılı: 2019, Multicont ATL Mega container body suitable for 40-foot and 45-foot containers, 45-foot swap body interchangeable platform, rear underrun protection extendable for 45-foot, chassis available in 91161 Hilpoltstein. Tsdsvrz Nxspfx Ad Noa

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, BERTOJA SEMI-TRAILER 13.80m BRAND NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Raised edge on gooseneck Winch pre-equipment Self-steering axle CONTACTS: 0823 1686306 335 6713062 Todpfxsxpi A Rs Ad Nea OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30 AM / 7:00 PM - SATURDAY 8:30 AM / 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder-770s – Limited Edition – 660 S Semitrailer – Refrigerated Tanker Semi-Trailer – Lamberet – Schmitz – Isuzu – Fixed Flatbed – Crane – Tipper – 4 Axles – Rear Four Axles – Tway-T-Way-540-460 HP – Xway-X-Way-Trilateral – V8 – Scania – Frost Edition Curtain Side – Box – Tail-lift Box – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies regarding equipment, optional extras, and vehicle features, which may in some cases differ from those stated in the description. We invite you to verify the specifications of each specific vehicle.

Durum: ikinci el, boş ağırlık: 14.995 kg, azami yük ağırlığı: 50.805 kg, toplam ağırlık: 65.800 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2023, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 900 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Üretim yılı: 2023, işletme ağırlığı: 14.995 kg, Donanım: ABS, With every used semi-trailer, you receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Loading Platform: - Extendable loading platform with rear bevel approx. 500 mm x 8° - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 4 pairs of outward-folding lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - 1 intermediate table 250 mm - Cut-outs in the outer frame of the loading platform for fastening straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, checker plate over the axles Axles and Tyres: - BPW axles, hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lifting/lowering valve - Axle tool kit - Tyres: 235/75 R17.5 Braking System: - Braking system compliant with EU regulations, EBS-E (4S3M) Included Accessories: - 2" king pin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Spare wheel with holder in front of the front wall - Electro-hydraulic unit - Remote steering from front and rear via wired remote control, with push buttons and single-track axle monitoring Todpfx Aov Hr Axed Nea - Recess at rear of gooseneck to accommodate ALU loading ramps - Galvanized, extendable widening by approx. 230 mm per side - European reflector panels (red-yellow) at the rear of the trailer - White reflective stripe compliant with EU regulations on the sides, on the extension, with red reflective stripe at the rear - Holders for warning signs on both the gooseneck and rear plate, including sockets left and right - Galvanized folding supports under the rear bevel of the loading platform - Mounting bracket for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard grease NLGI-2, removable pump guard - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: Removable ALU side walls and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container locks in the loading platform for one 20ft, two 20ft, 40ft, or one 45ft container - 8 pairs of stake pockets for 100 x 50 mm plug-in stakes in the external frame of the loading platform - Adjustable plug-in rails for ALU loading ramps at the rear of the vehicle - Lift axle on the front axle with control via TEBS E according to current axle load and loading condition - Four approximately 400 mm extendable warning signs, approx. 423 x 423 mm, each with a position light - Beacon bracket on the warning signs - Wireless remote control for rear steering in addition to cable remote, with indicator lights on receiver for single-track monitoring - Painted sand layer on checker plate above king pin and loading platform for slip resistance - 80 km/h speed sticker at the rear - Load gauge for determining axle loads including load chart

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 57.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.240 mm, yükleme alanı genişliği: 2.750 mm, yükleme alanı yüksekliği: 945 mm, renk: mavi, Üretim yılı: 2008, Bu düşük yataklı treylerden iki adet mevcut Üretici: Goldhofer Tip: STZ-VKL 3-34/80 A Yıl: 2008 Toplam ağırlık: 54.000 kg Boş ağırlık: 21.000 kg Yük kapasitesi: 33.000 kg Toplam tren uzunluğu: 20.000 mm (maks. teleskopik 24.200 mm) Tedpfx Adjxc U Nvs Noa Yükleme alanı (uzxgen): 7.300 mm x 2.750 mm (teleskopik olarak 4.200 mm’ye kadar) Lastikler: 235/75 R 17,5 Ekstra: Uzatma kirişi: 2x 6.000 mm

Durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 7.200 kg, azami yük ağırlığı: 31.800 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 10/2019, yükleme alanı uzunluğu: 13.700 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 800 mm, süspansiyon: hava, lastik boyutu: 235.75 r 17.5, renk: trafik turuncu, Üretim yılı: 2019, Donanım: ABS, Kullanılmış Moeslin alçak şasi treyler, kuğu boynu, rampalı, 3 dingilli (3. dingil yönlendirmeli), havalı süspansiyon, EBS, çıkarılabilir arka rampalar için hazırlık, 120 cm ön kafa, yanlarda 5 ton kapasiteli Rud halka kancaları, 20+20, 40 ve 45 feet konteyner taşıyabilen twist lock yuvaları, dikme yerleri için 3 adet geçişli travers, 2 adet PVC alet kutusu, yerden yükseklik 84 cm, model yılı 2019. Bayi: INTERDRIVE SRL - PARMA. Todpfx Aexnqvcod Nea

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WGOTHPE4560028329, toplam ağırlık: 102.000 kg, süspansiyon: hidrolik, renk: sarı, Üretim yılı: 2006, Goldhofer STHP-XLE 6 (2+4) with Excavator Bridge / Lowbed Location: D - 73230 Kirchheim unter Teck Technical data according to original TÜV inspection report: - Maximum speed: 80 km/h - Fifth wheel load: 30,000 kg Tsdpfx Adswzl Nme Noa - Front axle load: 2 x 12,000 kg - Rear axle load: 4 x 12,000 kg - Total trailer weight: 102,000 kg (with 30,000 kg fifth wheel load) - Unladen weight STHP-XLE 4 (0+4): 21.30 t / 23.50 t (incl. accessories) - Unladen weight STHP-XLE 6 (2+4): 26.70 t / 28.90 t (incl. accessories) Combination consisting of: GOOSENECK - Type XLE (Universal) - Weight: 4,500 kg - Max. fifth wheel load: 30,000 kg - King pin: 3.5" - Configuration for direct mounting of the excavator bridge or coupling of the 2-axle bogie - Central lubrication Beka-Max 2-AXLE BOGIE - Type XLE - Weight: 5,300 kg - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Loaded loading height approx. 1,240 mm (+/- 300 mm) - Central lubrication Beka-Max EXCAVATOR BRIDGE / LOWBED DECK - Payload: 67.75 t - Extendable from 6,000 to 14,000 mm - Central tube fixed to rear 4-axle bogie - Claw coupling at the front - Central tube width: 1,350 mm - Inner tube width: 600 mm - Construction height: 440 mm - Loaded deck height: 650 mm (ground clearance 210 mm) - Adjustable width from 2,750 to 3,250 mm - Sliding tables (weight 405 kg) - Folding widening panels (weight 1,955 kg) 4-AXLE BOGIE - Type XLE - Weight: 16,110 kg incl. excavator bridge - Axle load per line: 12,000 kg (80 km/h) - Axle manufacturer: BPW - Tyres: 285/70 R19.5 - Chassis width: 2,750 mm - Excavator arm recess: 700 mm - Loaded loading height approx. 1,140 mm (+400/-200 mm) - Central lubrication Beka-Max Good condition - German vehicle from first owner - Immediately available from stock in Kirchheim unter Teck - Further details on request.

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 15.900 kg, azami yük ağırlığı: 42.100 kg, toplam ağırlık: 58.000 kg, dingil konfigürasyonu: 3 aks, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2001, yükleme alanı uzunluğu: 8.960 mm, yükleme alanı genişliği: 2.520 mm, toplam uzunluk: 12.950 mm, toplam genişlik: 2.520 mm, toplam yükseklik: 3.800 mm, süspansiyon: hidrolik, lastik boyutu: 245/70R17,5, dingil mesafesi: 1.360 mm, azami hız: 90 km/s, renk: mavi, römork freni: frenli römork, Üretim yılı: 2001, Donanım: ABS, Nooteboom MCO-73-04V Top trailer from first owner, first registration: 21.11.2001, Refurbished in 2014, Brakes renewed in 12/2025! 66,000 kg total train weight with 3-axle tractor, Gross weight: 58,000 kg, Fifth wheel load: 18,000 kg, Axles 1-4: 10,000/10,000/10,000/10,000 kg, Unladen weight: 15,900 kg, Exact dimensions can be found in the technical data sheet, Lowbed: 8.96 m + 5.50 m telescopic extension, Hydraulic supports front and rear allow lifting the trailer including 30 t load completely, e.g., for side ramp unloading, Hydraulic suspension (also allows leveling for uneven load distribution), 1st axle liftable, 4 steerable axles, either automatic or remote-controlled as desired (also countersteering possible), Hydraulic ramps + hydraulically extendable up to 3,000 mm, Loading platform extendable up to 3,000 mm, Tyres: 245/70R17.5 1A=6/6/6/6mm 2A=11/11/8/8mm 3A=9/9/7/7mm 4A=11/11/7/5mm, spare wheel 6mm, Further details on request. Sale only to businesses or for export. Leasing/financing available on request – immediate processing, also without down payment! More information and requirements on request. Vehicle description is for general identification only. All information, images, and descriptions are provided without guarantee! Equipment details should be verified separately if required. The seller assumes no liability for any errors in typing or data transmission. Subject to error and prior sale. Thank you very much for your interest! We look forward to your visit. Our SERVICE We will gladly consider your used vehicle as part exchange, 30-day export license plates incl. insurance, EUR-1 and all customs export documents, TÜV / SP / UVV / tachograph inspection / OBU installation, Todjyqm I Uopfx Ad Nea Professional delivery to the customer, Transfer from Stuttgart Airport / Sindelfingen train station to our location possible by arrangement, Installation of additional components or other individual customer requests possible by arrangement.

Durum: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder Tedpfjxnnk Dox Ad Nea - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durum: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Tjdpfxjxnym Ds Ad Nja Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring Floor: - 35 mm larch wood floor with aluminum omega profiles Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Durum: yeni, boş ağırlık: 10.100 kg, azami yük ağırlığı: 38.900 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, işletme ağırlığı: 10.100 kg, Donanım: ABS, Chassis: - Robust steel frame weldment with front frame cranking and flat loading surface with rear tapering approx. 500x100 mm - Neck of frame 200 mm with chamfered corners - Tapered end of gooseneck approx. 500 x 100 mm (anti-slip ribs on outer frame in the rear taper area) - 2 king pin positions with replaceable 2" king pin - Outer frame closed on the outside, perforated profile for lashing with tension straps (chains not possible) - Reinforced frame version / point load at centre of gravity - Provisions for extendable widening devices in the loading area - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle up to rear end - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underrun protection = extended end plate - Drop-down supports at the rear Ramps: - Two-part loading ramps, special version with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only in combination with electro-hydraulic power pack) - Width approx. 800 mm - Timber surface - Incl. anti-slip ribs on the loading ramps - Secured in travel position with tension straps - Operation via control lever mounted at the rear, right in direction of travel - Laterally hydraulically adjustable Floor: - 35 mm larch floorboards with aluminium omega profiles Landing Gear: - Mechanical 24t landing legs with single-side operation and push compensation Axles, Steering and Tyres: - BPW air suspension axles, each with 10t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering mechanism with total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset centering - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel mounting - Lateral aluminium side impact protection - 4 wheel chocks - Elongated number plate holder in the end plate - 1 ECE panel insertable at the rear - 11 pairs of ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading surface - Steel mudguards with clear-pass - Slidable warning panels including 3 position lamps each, at the landing legs in front and behind the end plate, continuously extendable up to loading width of 4,500 mm - 4 removable holders for warning panels plug-in into stake pockets on the loading surface - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of transverse stake pockets for 100x50 mm stakes on the gooseneck from outer frame to the main frame (1x in front of and 1x behind king pin positions) - 3 rows of transverse stake pockets for 100x50 mm stakes on the loading surface from outer frame to main frame (1x front area, 1x in front of 1st axle, 1x behind 3rd axle) - 2 pairs of steel plates in loading surface for container locks to accommodate 1 x 20ft container - Rubber flap fitted on underrun protection Tsdpfx Adjwviwko Nsa - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted DB 7

Durum: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: Tjdpfxoxgm S Do Ad Nja - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Durum: yeni, boş ağırlık: 11.000 kg, azami yük ağırlığı: 38.500 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Telescopic loading platform with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and lower section widenings - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel and extending into loading platform for excavator stick approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in excavator stick recess (LC 5,000 daN) - Cut-outs in outer frame of loading platform for securing straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over wheel recesses – max. point load 3.5 t / each Two-Piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm hardwood covering - Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulically shiftable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tools - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Brackets for warning panels left and right on gooseneck and rear, incl. socket - One spare wheel - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on galvanized connection rail at front - 4 wheel chocks - Galvanized, extendable widenings by approx. 230 mm per side - Galvanized folding supports under rear bevel of platform Todeup U Hzspfx Ad Nsa - Bracket for beacon at rear of trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape to EU regulations on sides and extension, red at the rear - Electro-hydraulic unit at rear, under loading platform - Control valves for ramps positioned on right side of trailer - European reflector signs (red-yellow) on rear of trailer - Four extendable warning panels by approx. 400 mm, approx. 423 x 423 mm, with a position light - Mount for beacon on warning panels - Removable ALU sideboards and tailgate on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading platform for one 20ft or 30ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm on the outer frame of the platform - One removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the platform bevel - Anti-slip coated sand layer on tread plates of gooseneck and platform - 80 km/h speed limit stickers on the rear and on both sides - Load gauge for determining axle loads, including load diagram

Durum: yeni, boş ağırlık: 8.950 kg, azami yük ağırlığı: 40.050 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.950 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with a cranked front section and level loading area, with rear tapering approx. 500x100 mm - Neck height 200 mm with chamfered corners - Tapered end swan-neck approx. 500 x 100 mm (anti-slip ribs on outer frame in area of rear taper) - 2 king pin positions, replaceable 2" king pin - Closed outer frame with perforated outer profile for lashing with tension straps - Reinforced frame design / point load in center of gravity - Preparations for extendable loading area wideners - With excavator trough, approx. 220 mm deep, approx. 600 mm wide, extending approx. from after second axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers coated with Körapur), approx. 400 mm deep, and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Rear underride guard = extended end plate - Drop supports at rear Ramps: - 2 single-piece aluminum drive-on ramps with spring-assisted lifting function - Length x width approx. 2,500 mm x 600 mm - Lockable in transport position using tension straps - Manually sideways adjustable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24t landing gears, one-side operation with load compensation Todpfx Adswu Agij Noa Axles, Steering and Tires: - BPW air suspension axles, 10t axle load each, air bag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device, total stroke approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle with lift function (wired via EBS), fully automatic confirmation with mechanical emergency actuation via push button on trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, centered offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Brake System: - Dual-circuit brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Painting: - Steel shot blasting, spray galvanizing of frame and primer - Painting chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Plastic parts black, unpainted - Rims: factory silver - Reflective tape side and rear in yellow Accessories: - Plug-in side and rear boards on the swan neck, approx. 400 mm high - Spare wheel holder - Aluminum docking protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in end plate - 1 plug-in ECE panel at rear - 11 pairs of ZK modules 10t side: - 2x on the swan neck - 9x on the loading platform - Without rear tow rings - Extendable warning signs incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning signs, insertable into stake pockets on loading platform - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on swan neck from outer frame towards main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on the loading platform from outer frame towards main frame (1x front, 1x before 1st axle, and 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber apron mounted on underride guard

Durum: yeni, boş ağırlık: 29.600 kg, azami yük ağırlığı: 72.400 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 6.650 mm, yükleme alanı genişliği: 2.840 mm, yükleme alanı yüksekliği: 550 mm, lastik boyutu: 285/70 R19.5, renk: gri, işletme ağırlığı: 29.600 kg, Donanım: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: - Hook pick-up at front and rear - Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator Deck 'BB-A': - Telescopic excavator deck 'BB-A' with drive-over bridge hooks at the front and bolt-eye coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with ground clearance 150 mm 4-Axle Rear Bogie: - Mechanical bolt-eye coupling for connecting a low-bed at the front, rear cross member at the back - Bogie length x bogie width approx. 5,480 mm x 2,850 mm - Numerous lashing points Pendulum Axle and Tyres (Front and Rear Bogie): - "PENDULUM AXLE", all axles hydromechanically forced-steered - Burst hose valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and locking pins to secure in raised position - Final paint of axles with double-layer 2-component paint in MB 7350 Novagrau, single-color finish - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres: 285/70 R19.5 Remote Steering: - Steering from front and rear via cable remote control with push-buttons, including single-track alignment monitoring - Socket for remote steering operation on the gooseneck - Cable remote control with push-buttons including single-track alignment monitoring Included Accessories: - At the galvanized connection bar at the front: yellow-red air couplings - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" kingpin - One 7-pin socket at left and right rear of the gooseneck for warning signs - Support bracket with winch for spare wheel at the front of the gooseneck - Truck hydraulic connection with flow controller (40 l/min), including bracket for suspension of supply lines; tractor unit tank must be at least 80 liters with couplings - Plug-in ALU side and tail boards on the gooseneck, approx. 400 mm high, anodized - Control lever on the gooseneck protected by a fold-down cover - Separate air connection with air gun on the gooseneck - Central lubrication system BEKAMAX, 1x on the gooseneck, 1x on the 2-axle bogie, and 1x on the 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-bed hook-up - 2 spare wheels - One 7-pin socket left and right, at the front and rear end of the rear bogie for the warning sign - Front bogie with separate air connection for air tools - Foldable extensions with steel deck inserts, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel deck inserts can be placed in 2 positions to create a lowered loading area - Steel mats with 12 mm thick rubber surface - Screw-in option (⌀ 40 mm) every approx. 500 mm on the outside flange of the outer tube of the excavator deck for lashing rings - One locking position every approx. 500 mm at the extension with mechanical lock - Socket for cable remote control of the remote steering at the rear bogie Tedpfx Adowcmhas Noa - 2 reversing lights on the rear panel - Four warning signs extendable by approx. 2,000 mm approx. 423 x 423 mm with a position light - 1 work light left/right on the rear panel of the gooseneck with separate on/off switch - Two INOX toolboxes approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Wireless remote control for the remote steering

Durum: yeni, boş ağırlık: 10.300 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Loading area after the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading area for securing tension straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Two-part Steel Ramps: - One pair of galvanized, two-part steel ramps approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding and unfolding ramp sections, hydraulic lifting mechanism, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle trailing steer - Technical axle load: 12,000 kg - Electro-magnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tools - Tyres 235/75 R 17.5 3PMSF - TPMS tyre pressure monitoring system according to ECE R 141 Included Accessories: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks - Galvanized folding supports under the chamfer of the loading area - One holder for a beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and the loading area - White reflective tape according to EU regulations on the sides of the trailer and red on the rear - Electro-hydraulic unit at the rear, under the loading area - Holder for warning signs left and right on the gooseneck and ramps, including socket - Control valves for the ramps located on the right side of the trailer - European reflective boards (red-yellow) at the rear of the trailer - Manual and description on USB stick - On the gooseneck, ALU drop-in side boards and rear wall approx. 2,440 x 400 mm Tedpfx Aeu Hp Hred Noa - The rear, galvanized drop-in stakes are removable (length of superstructure approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm thick steel cable, 24 m long with cable guide roller - Bolted 5t ring for running the winch cable on the gooseneck without pulley - 2 pairs of WADER container pockets in the loading area for one 20ft container - 6 pairs of stake pockets for drop-in stakes 100 x 50 mm in the outer frame of the loading area - Lift axle on the front axle controlled by TEBS E depending on the current axle load and load status - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear in the chamfer (LC 10,000 daN) - On the chequer plates on the gooseneck and the loading area, painted sand layer as slip resistance - BEKAMAX centralized lubrication system (Pico) with standard grease NLGI-2 and removable guard for the pump - Four warning boards extendable by approx. 400 mm, size approx. 423 x 423 mm - 80 km/h speed stickers at the rear and on both sides - Load gauge to determine axle loads, including load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot blasted, then defined visible surfaces hot-coated in metallization with ZINACOR 850 (85% zinc - 15% aluminium)

Durum: yeni, boş ağırlık: 10.900 kg, azami yük ağırlığı: 37.100 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, işletme ağırlığı: 10.900 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° chamfer - Technical fifth wheel load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading Platform: - Loading area, approx. 9,600 mm long, with chamfer at the rear approx. 900 mm x 6° - Loading area behind the gooseneck hydraulically raiseable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg Tedpfx Asuadk Nsd Noa - Grating surface and approx. 5 mm steel plate as additional reinforcement on the chamfered section of the loading area Ramps: - One pair of two-piece AXS steel ramps, approx. 4,675 mm long, approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 365 mm inwards - Painted sand coating on the outer frame of the ramp as well as on the ramp tip - Flashing lights on the outer side of the ramp tips with switch next to the ramp control - Ramp locking in transport position with quick-release fastener Axles, Suspension and Tyres: - BPW axles and suspension, 1st and 2nd axle fixed, 3rd axle self-steering - 1st axle with starting aid - Operated via the brake pedal of the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 - TPMS tyre pressure sensors fitted on all wheels including spares Brake System: - WABCO EBS-E braking system according to EU regulations Paintwork: - Trailer painted MB 7350 Novagrau grey Accessories Included: - Plug-in steel front wall, approx. 400 mm high - 3 kW electric hydraulic power pack for controlling hydraulic operations, except hydraulic winches - Guide plate from gooseneck for the fifth wheel plate, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating surface with 5 mm steel plate underneath as additional reinforcement - Painted sand coating - Cut-outs in the outer frame of the loading platform and lifting bed for attaching hydraulic ramp control valves on the right side of the vehicle - 2" king pin - Central lubrication system with one pump, brand BEKAMAX - On gooseneck, 1 pair of plug-in side ALU folding walls, approx. 400 mm high, anodized - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm