Kullanılmış Müller-Mitteltal T4, Luftfed., Hydr. Klapprampe, Baggerstiel. satın al (3.795)

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system Cgsdpfx Alsx Ipa Njdst * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Koşul: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED rear lights Cgedex Ipavspfx Aldst * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2025, * T3 Profi 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Rear swing-out supports mounted to chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight galvanized steel skirts, each with spray guards * Reflective contour marking tape on sides and rear * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Towing bracket with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power plug * 4 stake pockets per side (no stakes included), with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed into the outer frame – rated at 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not on the rear slope) * Widening planks stored in the center of the loading area * Hot-dip galvanized monobloc hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-way control block for retrofit of hydraulic side ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires Cedpfel Th I Asx Aldjgt * Approx. 5,980 kg unladen weight * Technically permissible total weight: 30,000 kg * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from calendar week 11/2026

Koşul: yeni, azami yük ağırlığı: 23.940 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle compensation * Side underrun protection * Swing-type supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel sheet skirts, each with spray protection * Reflective contour tape on sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Foldable lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage electrical system * LED tail lights * Rear removable beacon * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and integrated in the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a 3 m overall width (not at the rear taper) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Four-way control block for retrofitting hydraulic lateral ramp displacement * Platform over fifth wheel: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires Cgedpfxjl Th Nns Aldst * Approx. 5,980 kg unladen weight * Technically permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 11/2026

Koşul: ikinci el, azami yük ağırlığı: 17.500 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2005, bir sonraki muayene (TÜV): 01/2027, yükleme alanı genişliği: 2.500 mm, ? Hidrolik rampalar ? Genişletilebilir Csdpfx Asytz Hwsldogt ? Her iki tarafta 8 adet yük bağlama halkası ? Stepne tutucu ? Yükleme yüksekliği: yaklaşık 930 mm ? Kampanalı fren ? Duomatic bağlantı ? Yaprak yaylı süspansiyon ? Çift tekerlekli lastik Tüm bilgiler garanti verilmeden sunulmuştur / Ara satış hakkı saklıdır.

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including return-to-ride (RtR) valve * Smart-Board installed on the trailer as an infotool (for displaying axle loads – separate display for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign sets at front and rear * Front axle with plastic quarter mudguards and spray protection * Rear axle with straight, galvanized steel apron and spray protection * Reflective contour tape on the side and rear * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Drawbar 1,200 mm long with 40 mm draw eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Compartment in the turntable for accessories with folding lid, 2 fixed container locks (directly after the turntable platform) * ROBOT-welded anti-slip covering on the steel plate of the turntable platform (with protruding weld seams) Cgedpjtplwiofx Aldjt * Load securing package consisting of: 2 lashing eyes (13.4 t) at the front left & right at the bulkhead support, one pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs of swing- and lowerable UVV lashing rings (10 t each) per side, loadable in all directions and integrated into the outer frame, plus 3 stake pockets per side, each with additional 2 t lashing possibility * 6 pairs of mechanical folding outriggers for up to 3 meters total width (not in the rear taper) * Widening planks stored in the center of the cargo area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanical lateral adjustment * 4-section control block prepared for future retrofit of hydraulic ramp shift * Excavator stick support over rear axle, extending to rear cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator stick support, mounted on the side in the longitudinal frame * 2 galvanized steps at the turntable, left & right * Profifix lashing rail along the center longitudinal axis, in flat area, with lashing points up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and loading ramps hot-dip galvanized * Axles, slewing ring, air reservoirs, and drawbar painted in black * Loading edge height laden approx. 910 mm +/- 20 mm (air suspension) * New vehicle with manufacturer’s warranty * Subject to error and prior sale * Available approx. from calendar week 22/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.380 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * PT 30 Profile: Cedpsxptn Refx Aldjgt * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function and return-to-ride (RtR) valve * Smart-board mounted on trailer as info tool (for axle load display – separately for front and rear) * Tyre pressure monitoring with in-cab display via EBS signal, no truck-side installation required * Side underrun protection * Swivel support legs at rear of chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized sheet metal skirts with spray protection * Reflective contour tape on sides and rear * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) mounted at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 container locks permanently installed (immediately after the turntable platform) * ROBOT-WELDED ANTI-SLIP coating to steel turntable platform (protruding weld seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on bulkhead carrier, 1 pair each of UVV lashing rings (13.4 t) front & rear, 3 pairs each of UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and integrated into the outer frame, 3 stake pockets per side, each with 2 t lashing capability * 6 pairs of mechanical folding outriggers for 3 m total width (not at rear taper) * Extension planks stored in the center of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm recess over rear axle, continuous up to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in excavator arm recess, integrated in the side longitudinal frame * 2 galvanized steps at turntable left + right * Profifix lashing rail in longitudinal axis, centered in level area, for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports and loading ramps hot-dip galvanized * Axles, slewing ring, air tank, towing bar painted in black tone * Loading height loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 22/2026 * Sample images

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Cgodpsqpgtmofx Aldet Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: ikinci el, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2004, bir sonraki muayene (TÜV): 08/2026, * Müller Mitteltal TS3 alçak şasi treyler (dorseli) * İlk tescil: 11/2004 * 3 aks * Havali süspansiyon Cgjdpfsw Tgkbsx Aldet * Gigant akslar * Hidrolik uzun rampalar, kaydırılabilir ve katlanabilir * Yatak genişliği 2,50 m'den 3,0 m'ye kadar artırılabilir * Yükleme uzunluğu: 8,50 m, yükseklik: 0,85 m * Boyun kısmında yükleme uzunluğu: 3,40 m, yükseklik: 1,50 m * Destek ayakları * Boş ağırlık: 10.260 kg * Teknik toplam ağırlık: 47.000 kg * Muayene geçerlilik: 08/2026'ya kadar * Genel muayene: 02/2026'ya kadar geçerli

Koşul: ikinci el, azami yük ağırlığı: 29.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2010, bir sonraki muayene (TÜV): 05/2026, Ölçü-B 11.750 mm Boş ağırlık 10.250 kg Cgedpfexpmmmsx Aldjt Aks yükü 2 x 10.000 kg Döner tabla üzerinden yükleme uzunluğu 2.400 mm (350 mm eğimli dahil) Yükleme uzunluğu 7.700 mm (900 mm eğimli dahil) Yükleme yüksekliği 880 mm Genişlik 2.550 mm, 3.000 mm'ye kadar genişletilebilir Ekskavatör kolu için havuz (UxGxY yaklaşık 2.500 x 740 x 180 mm) SAF akslar, havalı süspansiyonlu 2 parçalı hidrolik rampalar, 2.100 mm + 2.000 mm uzunluğunda, 650 mm genişliğinde dahil Rampalar hidrolik olarak ayarlanabilir Arkada hidrolik destek 2. akstan sonra tekerlek boşluğu Önde tekerlek boşluğu, üst uzunluk yaklaşık 2.000 mm x 1.100 mm, alt derinlik yaklaşık 350 mm 3. ve 4. aks arasında tekerlek boşlukları Arkada tekerlek boşluğu, üst uzunluk yaklaşık 1.300 mm x 550 mm, alt derinlik yaklaşık 220 mm

Koşul: ikinci el, makine/araç numarası: 110, boş ağırlık: 8.320 kg, azami yük ağırlığı: 31.680 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/2008, yükleme alanı uzunluğu: 10.300 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: çelik, lastik boyutu: 235/75 r17,5, dingil mesafesi: 6.500 mm, renk: mavi, Donanım: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm – width 650 mm * Loading edge height 920 mm * Extendable to 3 m wide Cjdpslpav Ujfx Aldjgt Subject to errors and omissions.

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Towing Bar / Flange Towing Eye: * Towing bar height adjustable by 300 mm * Towing bar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for tractors with 12 and 24 V electrical systems ----General Attachments: * Landing gear at the front * Fold-out rear support legs externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofit container lock fittings * 400 mm screwed flat steel front wall * Bolt-on stanchions at the rear * Drop sides with spring assistors ----Load Securing: * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner, front and rear * Various drilled holes in the front and rear crossmembers for 1.2 t lashing points * Profifix lashing rail in the middle longitudinal axis, lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-up ramps approx. 2,750 x 600 mm (can be pushed together to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, towing bar, bulkhead, mechanical drop legs, and drive-up ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Drop sides painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Cgsdperwc R Rsfx Aldot ----Delivery time: * Available from approx. week 16/2026

Koşul: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking system: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General attachments: * Front landing gear (support winch) * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: Cgjdpfx Alerwc R Aodet * 50 mm softwood flooring * Pre-installation in front of the bulkhead for retrofitting container locks * 400 mm bolted smooth sheet steel bulkhead * Bolt-on rear stanchions * Sideboards with spring-assisted lifting ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings at 600 mm intervals * One 6.3 t lashing ring in each corner front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options * Profifix lashing rail along the central longitudinal axis for lashing up to LC 3000 daN ----Ramps: * Single-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible down to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of over 40 litres/min up to max. 140 litres/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports and ramps hot-dip galvanised * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Sideboards painted RAL 9010 pure white * Side panels can be painted in a RAL colour of your choice for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 16/2026

Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku Cjdpfx Alowmpbdedogt - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalizing unit with 100 mm wide parabolic springs * Landing gear at front * Mechanical drop-down jacks at rear * Fixed welded drawbar with low-maintenance K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate), with raised bracket for connecting lines * 12 V, 7 + 4 pin electrical connection * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, operable from the towing vehicle without need for vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, side-mounted on the right * Chassis made of fine-grain steel * Steel three-way tipper body with M-Strong drop sides (fixed front panel, continuous side panels without intermediate stanchions, pendulum-mounted via manual central locking and mechanically foldable with drop side spring assist) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute, 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner (recessed and foldable), 4 x 3 t on each side * Two-step hot-dip galvanized access ladder at the front left * 1 pair aluminum loading ramps (10 t/pair, axle spacing > 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 sockets for aluminum loading ramps, rear-mounted in chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm * Superstructure paintwork in RAL 9010 pure white Cgsdpfx Aor Dpzusldst * Chassis, drawbar, rear drop-down jacks, underride guard hot-dip galvanized * Axles, air tanks, front landing gear * K80 coupling painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately from Egestorf

Koşul: yeni, azami yük ağırlığı: 16.000 kg, toplam ağırlık: 21.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalization system with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed, welded-in drawbar with a low-maintenance K80 ball hitch (adjustable by +77 mm / 33 mm via head plate), with raised bracket for connection lines * 12 V 7 + 4 pin electrical wiring * LED lighting system 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel * Steel pallet 3-way tipping body with M-Strong side walls (fixed front wall, continuous side walls - without central stanchions - swinging on mechanical central locking and mechanically foldable with drop-side spring lift) * Hydraulic tailgate, 500 mm high, acts as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * Lashing rings: 1 x 7 t in each corner, plus 4 x 3 t each side, recessed and foldable * Hot-dip galvanized 2-step access in front of the front wall (on driver’s side left) * 1 pair aluminum loading ramps (10 t / pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 ramp storage compartments at the rear, integrated into chassis; load securing according to EN 12642 XL * Coupling height loaded approx. 530 mm, unloaded approx. 590 mm * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear drop-down supports and underride protection all hot-dip galvanized * Axles, air tanks, front support winch * K80 hitch painted in black * New vehicle with manufacturer’s warranty Codpfer Dpz Hsx Aldsgt * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, ilk tescil: 09/2018, toplam uzunluk: 11.830 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.720 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: diğer, Üretim yılı: 2018, Donanım: ABS, hidrolik arka platform, = Additional options and accessories = - EBS - Hydraulic system - Tail lift = Remarks = Number of axles: 4, Net weight: 9,900 kg, Gross weight: 40,000 kg, Chassis type: Full chassis, Chassis material: Steel, Suspension type: Full air suspension, ABS, EBS, Hydraulic system, Body year: 2018, Body material: Steel, Ramps: Hydraulically controlled, Axle make: BPW, Tail lift, Tail lift version: Rear flap, Tail lift material: Steel, Wheel recess / Double hydraulic ramps / 40t technical / Galvanised / Extendable = More information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steered; Tyre tread left inner: 10 mm; Tyre tread left outer: 10 mm; Tyre tread right inner: 11 mm; Tyre tread right outer: 10 mm Axle 2: Twin tyres; Tyre tread left inner: 8 mm; Tyre tread left outer: 7 mm; Tyre tread right inner: 7 mm; Tyre tread right outer: 7 mm Axle 3: Twin tyres; Tyre tread left inner: 7 mm; Tyre tread left outer: 7 mm; Tyre tread right inner: 10 mm; Tyre tread right outer: 10 mm Cgsdjyqp Tmspfx Aldst Axle 4: Twin tyres; Tyre tread left inner: 7 mm; Tyre tread left outer: 6 mm; Tyre tread right inner: 4 mm; Tyre tread right outer: 6 mm Weights Unladen weight: 9,900 kg Payload: 30,100 kg Gross vehicle weight: 40,000 kg Functional Tail lift: Rear flap Loading floor height: 89 cm Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, fast-changing inventory • Recognisable quality • Attractive pricing • Professional business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration quickly arranged • Expert technical services • The security of 'recognisable quality' • And more... Please visit our website for special offers and the full stock list: Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an enquiry via our website. Ask directly about our European warranty package.

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW axles * Traction aid for shunting purposes, activated on the first axle via EBS (no truck-side installation required) * The last axle as a self-steering trailing axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes, controlled from the driver's cab via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function as well as Ride height control valve ----Electrical / Lighting: * Smart-Board mounted as an info tool on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED rotating beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for extended length lighting * Side marker lights with indicator function * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swiveling supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection lines from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 mm x H = 500 mm x L = 665 mm with hinged lid * 400 mm high aluminium drop and removable side walls (in RAL color of choice) on the fifth wheel platform * Rear wall —150 mm— plugged in high * Rear slope on the fifth wheel platform to the low-bed, approx. 700 mm long with checker plate covering and a perforated strip at the end for attaching aluminium drive-on ramps Cedsykx Nkopfx Aldogt * Fifth wheel platform with 50 mm clamped wooden floorboards, low bed platform with 60 mm clamped wooden floorboards * Checker plate over the axles * 9 mechanical folding wideners to 3 m overall width (excluding rear slope); widening planks available with closed transverse storage compartment underneath the load platform * Preparation for 3 insertion shafts under the fifth wheel platform to store either aluminium drive-on ramps or wooden planks for covering wheel recesses * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated external frame, 45° bent, with hole pattern for lashing devices (2 t lashing capacity per point at a minimum distance of 480 mm) * 3 x 13.4 ton lashing rings recessed to the side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the step, 1 x above the middle axle next to the longitudinal beam) Low Loader Platform: * 3 x 13.4 ton lashing rings on each side of the external frame (1 x at the start of the fifth wheel step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and first axle, 1 x between 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to each side of the external frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last

Koşul: yeni, azami yük ağırlığı: 37.560 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for shunting purposes on the first axle, activated via EBS (no truck-side installation required) * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for the trailing axle, operated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function and RTR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for length extension lighting * Side marker lamps with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Support winds at the front and swiveling supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swivel arm as a carrier for connection cables from the truck to the semi-trailer ----Lowbed Deck: * 2nd kingpin position * Fifth wheel platform with 45° chamfered front corners and tool box at the front made of galvanized, powder-coated steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high drop-side aluminium boards on the sides of the fifth wheel platform (in RAL color of choice), foldable and removable * Rear wall insertable, 150 mm high * Rear slope on the fifth wheel platform, approx. 700 mm long with chequer plate surface and at the end a perforated bar for hooking in aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 x mechanical fold-out extensions to 3 m total width, except on the rear slope (extension boards available with closed storage compartment crosswise under the loading area) * Preparation for 3 mounting shafts under the fifth wheel platform to store either aluminium loading ramps or wooden planks for wheel well covers * Preparation for container locks on the swan neck Codsykx Nqjpfx Aldsgt ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame, 45° angled with hole pattern for lashing points (2 t lashing force per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor on each side (1 x on the fifth wheel platform, 1 x on the longitudinal beams after necking, and 1 x above the center axle next to the longitudinal beam) Lowbed platform: * 3 x 13.4 t lashing rings on each side of the outer frame (1 x start of the fifth wheel platform neck, 1 x start of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle, and 1 x between 2nd and 3rd axles) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel well (2 on the front wheel well, 1 on the rear wheel well) ----Excavator boom support: * Extended excavator boom support from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforceme

Koşul: ikinci el, dingil konfigürasyonu: 3 aks, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2008, 4 dingilli alçak şasi römork, üzerinden geçilebilir. Azami toplam ağırlık 40.000 kg, taşıma kapasitesi 31.820 kg. Yükleme yüzeyi yaklaşık 9.800 mm (2.400+7.400 mm) x 2.550 mm, katlanabilir genişletmelerle 3.000 mm'ye kadar, aşırı genişlik uyarı paketi, döner tepe lambası, kepçe kolu desteği, yükseklik yaklaşık 900 mm. 12 bağlama halkası, dış şasede 12 bağlama köprüsü. Hidrolik rampalar yaklaşık 3.000 x 650 mm. SAF akslar, EBS, dengeleyicili parabolik süspansiyon, lastik ölçüsü 235-75R17.5. Takım sandığı. Arka hidrolik ayaklar. Çeki oku 50 mm. 2 hat hidrolik, 2 hat hava (duomatik), 24 volt. Sarı boya. Mevcut durumda satılık. = Daha fazla bilgi = Lastik ölçüsü: 235-75R17.5 Süspansiyon: Parabolik süspansiyon Boş ağırlık: 8.180 kg Yük kapasitesi: 31.820 kg Codpjuuxg Nsfx Aldegt Azami toplam ağırlık: 40.000 kg Üretim ülkesi: DE Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin.

Koşul: ikinci el, boş ağırlık: 9.300 kg, azami yük ağırlığı: 14.700 kg, ilk tescil: 02/2001, bir sonraki muayene (TÜV): 10/2024, toplam genişlik: 25.500 mm, süspansiyon: çelik, lastik boyutu: 235 / 75 R 17.5 / 10mm, ön lastik ölçüsü: 235 / 75 R 17.5 / 10mm, işletme ağırlığı: 24.000 kg,

Koşul: ikinci el, azami yük ağırlığı: 30.700 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 11/2002, Donanım: ABS, * MüllerMitteltal alçak şasi 4 dingilli T40 Cgjdpfxeyuri Eo Aldjt * 2X yönlendirilebilir döner tabla aksı * Alman römorku * Direk * Hidrolik olarak yana kaydırılabilen rampalar (sol-sağ) * Katlanabilir, bölünmüş rampalar * Genişletilebilir * ABS * BPW akslar * 40 ton * Boş ağırlık: 9.300 kg * Dingil başına yük kapasitesi: 10 ton * Tam çalışır durumda * Lastikler iyi durumda

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting on the first axle, activated via EBS (no truck-side installation required) * Rearmost axle as a self-steering trailing axle with electro-pneumatic steering lock * Lock for the trailing axle can be activated from the cab for shunting purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with lift and lower function, including ride height control valve ----Electrics / Lighting: Cedpfxeq Euake Aldegt * Smart-Board mounted as infotool on trailer with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12/24 V * Removable LED rotating beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tyre pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel wheel arches * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection cables from truck to trailer ----Low Loader Platform: * 2nd kingpin position * Fifth wheel platform with front edges chamfered at 45°, front toolbox made of galvanised, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides on the platform (in RAL colour of choice), fold-down and removable * Rear board plugged in, 150 mm high * Rear chamfer at the platform leading to the lowbed, approx. 700 mm long with checker plate covering and a perforated strip at the end for hooking in aluminium approach ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over axles * 9 mechanical folding widenings to 3 m total width (excluding rear chamfer), widening planks included, with lockable transverse storage compartment under the loading area * 3 storage compartments under the platform for optional aluminium approach ramps or wooden planks for wheel well covering ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum spacing 480 mm) * Each side equipped with 3 sunken 13.4 t lashing rings in the floor (1 on the platform, 1 on the longitudinal beams after the gooseneck, 1 above the middle axle next to the longitudinal beam) Low Loader Platform: * Each side equipped with 3 x 13.4 t lashing rings on the outer frame (1 at start of gooseneck, 1 at start of drive-on chamfer, 1 at end of drive-on chamfer) * Each side with 2 x 10 t lashing rings (1 between front wheel well and 1st axle, 1 between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 at the front and 1 at the rear wheel well) ----Excavator Arm Rest: * Extended excavator arm rest from end of last fixed axle across the steering axle to rear crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * Each side with 2 x 6.4 t lashing rings

Koşul: yeni, azami yük ağırlığı: 37.390 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Üretim yılı: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for shunting operations activated on the first axle via EBS (no installation required on the truck side) * Rear axle configured as a trailing steering axle with electro-pneumatic steering lock * Trailing axle lock for shunting, controlled from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with raising and lowering function and ride height control valve ----Electrics / Lighting: * Smart-board info tool mounted on the trailer with pressure sensors for total axle load display * 15-pin power socket * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display capability in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Support legs at the front and swivel jacks at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning board kits at front and rear * Pivoting arm as carrier for connection lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Semi-trailer platform with 45° beveled front corners and a front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with hinged lid * Removable and fold-down 400 mm high aluminum sideboards on the semi-trailer platform (in custom RAL color) * 150 mm high inserted rear panel * Rear bevel on the semi-trailer platform to the low-bed area, approx. 700 mm in length, with checker plate covering and a perforated strip at the end for hooking on aluminum drive-up ramps * Semi-trailer platform with 50 mm clamped wooden planks; low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, not in the rear bevel (extension planks available with enclosed transverse storage compartment under the loading area) * 3 storage compartments under the semi-trailer platform for optional storage of aluminum ramps or planks for covering wheel recesses ----Load Securing (LaSi package): Semi-trailer platform: * Perforated outer frame angled at 45° with hole pattern for lashing equipment (2 t lashing capacity per lashing point, minimum 480 mm spacing) * 3 x 13.4 t recessed lashing rings per side in the floor (1 on the semi-trailer platform, 1 on the longitudinal member after the step-down, and 1 above the center axle next to the longitudinal member) Low-bed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 at the start of the step-down, 1 at the start of the ramp, 1 at the end of the ramp) * 2 x 10 t lashing rings per side (1 between the front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel recesses (2 on the front, 1 on the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, running from the end of the last rigid axle over the steering axle to the rear cross member, continuous, with internal reinforcement profile, approx. width 770 mm, rear depth 270 / front depth 170 mm * 2 x Cjdpfxstpta De Aldegt

Koşul: ikinci el, makine/araç numarası: 39500, boş ağırlık: 8.250 kg, azami yük ağırlığı: 31.750 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 05/1995, lastik boyutu: 235/75 r17,5 zwilling, Üretim yılı: 1995, Further information Main and outer frame constructed from high-strength double-T profiles, grade ST 52.3, profiled longitudinally in four sections, with high-webbed front and rear end plates as well as crossmembers; frame features a flat-contoured offset drop and rear loading ramp slope (0.8 m in length) behind the bogie passage; lowest possible floor height achieved by recessed wheel wells above the rear wheels; bogie platform's front corners are chamfered at 45 degrees. Two recessed UVV lashing rings each located on the bogie platform and on the loading ramp slope for attaching tensioning devices. Rear end equipped with wide bearings for a sixfold-supported ramp shaft. Side safety guard with protective bar compliant with EC regulations, wheel chocks with clamp safety feature. Low-maintenance inclined roller bearing axles with automatic brake adjusters, dual-line compressed air brake system in accordance with EC standards, and parking brake. Bogie and towing drawbar: Manufactured from double-T profiles in a welded construction with a slewing ring connection, standard drawbar length 1500 mm, fitted with 8 drawbar eyes (50 mm diameter), support leg with threaded spindle height adjustment; vehicle does not have axle load compensation! 24 Volt electrical system, two interchangeable 7-pin connection cables, large rectangular four-chamber taillights including rear fog light and reversing spotlight, front distribution box, rear outline marker lights, side marker reflectors, as well as bracket for single-line license plate. Undercarriage made of 40 mm thick pressure-impregnated pine wood. Low-bed platform and ramp slope feature crossed upper decking, 30 mm thick, laid lengthwise; total floor thickness is 70 mm. Bogie platform features a longitudinal simple floor with a recessed, open tool box, dimensions L 700 x W 800 x D 180 mm. Ramps: Welded construction with tray sheet, cross beams, longitudinally-laid wooden decking (50 mm thick), ramp ends reinforced, ramp holding rods with turnbuckle and lock, ramps can be shifted 470 mm to each side, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with external and internal springs for easy single-person operation, with automatic ground supports. Cjdpfxei Rixgj Aldogt Steel shot blasted, zinc phosphate primed, single-colour acrylic finish in RAL colours, wheels painted silver, available in standard, light, and metallic colours as well as two-tone paint finishes; wood surfaces stained.