Kullanılmış Faymonville Max Trailer 3-Achs-Tele-Semi-Nachlaufg. satın al (53.543)

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment details. Complete specification available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45°, with rear bevel approx. 750 mm x 10° * 3 pairs lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform: * Loading area aft of the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs outward-folding lashing rings (LC 5,000 daN) * 2 pairs outward-folding lashing rings (LC 10,000 daN) * 1 pair inward-folding lashing rings at the central beam front (LC 10,000 daN) * Cutouts in the external frame of the loading area for securing strap hooks (LC 2,000 daN) * Grating floor covering C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), checker plate floor covering above the axles Two-piece steel ramps: * One pair galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections * Hydraulic lifting unit, hydraulically adjustable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steered axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * Tire Pressure Monitoring System (TPMS) according to ECE R 141 Lhodpfx Agjyhkrrj Nef Paintwork: * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K top coat, single color in RAL 3002 Carmine Red in accordance with RAL System 841GL * Wheels in silver grey Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating floor covering in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating floor covering in the loading platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electro-hydraulic unit at the rear beneath the loading area * On the gooseneck – plug-in aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * One electric cable winch with remote control, approx. 5,400 kg pulling force, incl. wire rope approx. 9.5 mm thick, approx. 24 m long, with guide roller * Bolted approx. 5t ring for winch cable insertion on the gooseneck without deflection roller * One galvanized toolbox, integrated in the gooseneck bevel with an opening for a winch * Grating floor covering on the gooseneck C30/3 (point load approx. 2t over an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the external frame of the loading area * Lift axle on the front axle, controlled via TEBS E in accordance with current axle load and loading condition * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs at the r

Durumu: yeni, azami yük ağırlığı: 37.075 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Lsdpeyhkqzofx Ag Nohf Extract from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, approx. 2,800 mm long, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of fold-in lashing rings on the central beam at the front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp sections. Hydraulic lifting, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Gear: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Brake System: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Tires: * Tires 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) ensuring optimal corrosion protection * Final paint with 2 layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL System 841GL * Wheels in silver-gray Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Grating surface in the gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the loading platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Painted sand layer as anti-slip on the checker plates above the kingpin and platform * Electro-hydraulic unit at rear beneath the loading platform * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable. (Body length approx. 2,560 mm) * Electric cable winch with radio remote control, lifting force approx. 5,400 kg, incl. approx. 9.5 mm thick wire cable, approx. 24 m long, with cable guiding roller * Bolted approx. 5 t ring for redirecting the winch cable on the gooseneck without guide pulley * One galvanized toolbox integrated in the chamfered gooseneck with an opening for a cable winch * Grating surface on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * Lift axle on the front axle, controlled via TEBS E based on current axle load and loading status * 7 pairs inst...

Durumu: yeni, boş ağırlık: 10.000 kg, azami yük ağırlığı: 41.600 kg, toplam ağırlık: 51.600 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, Cargo area: - Gooseneck, length approx. 4,100 mm with central beam - Cargo area in extendable design, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum loading ramps - Pneumatic locking with conical locking pins and reinforced locking positions - Supply lines are protected within the extendable beams and automatically adapt to the respective cargo area length Axles, suspension, and tires: - BPW axles and suspension, all axles hydro-mechanically forcibly steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tires: 235/75 R17.5 twin tires Paintwork: - 6-coat final treatment - Entire steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paint with two coats of 2-component acrylic paint, single color in MB 7350 Novagrau, then hollow sections sealed with special wax Steel construction: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - MAG welding process according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket on the front connection bar - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets recessed in the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 cross stake pocket bar mounted in the gooseneck cargo floor for stakes approx. 100x50 mm (1x at the rear of the gooseneck) - 2" kingpin - Mechanical landing legs with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Approx. 32 mm wooden floor encased in aluminum omega profiles on the gooseneck and cargo area - One locking position per extension, approx. every 500 mm - 10 pairs of recessed horizontal lashing rings in the outer frame of the cargo area, foldable outward - 6 pairs of stake pockets recessed in the outer frame of the cargo area for stakes approx. 100x50 mm - 2 cross stake pocket bars installed in the cargo floor of the cargo area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Rear cross member with a bevel approx. 350 mm at 10° - Integrated mounting rail for loose aluminum loading ramps at the rear cross member - 1 pair of drop-leg supports at the rear cross member - Fenders on all axles - Central lubrication system with 1 pump - Remote axle steering operated from front and rear via cable remote control with pushbuttons and single-track monitoring of the axles - Under the gooseneck and on the left and right at the rear cross member, one 7-pin socket each for warning boards - One 7-pin socket at the rear cross member Lhedpfsiuy Nlox Ag Nsf - Container locks "TWIST-LOCKS" in the cargo area for transporting 2x 20ft and 1x 40ft containers - Radio remote control for axle steering in addition to cable remote control, with 2 indicator lights at the receiver for single-track monitoring - 2 axle load gauges + axle load chart - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then the defined visible areas metallized with ZINACOR 850 (zinc 85% - aluminum 15%) by hot finis

Durumu: yeni, boş ağırlık: 14.350 kg, azami yük ağırlığı: 53.450 kg, toplam ağırlık: 67.800 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - Suitable for tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Loading platform with extendable design, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° - Recess in the loading platform as well as extending into the chamfer for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, each approx. 4,350 mm long and approx. 900 mm wide - Ramps with rubber covering - Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 215 mm inward - "Super Grip" rubber flooring 25 mm and steel plate flooring approx. 5 mm as additional reinforcement on the chamfer of the platform - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension, and tires: - BPW axles and suspension, 1st axle steered, all other axles forced steered hydromechanically - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, can be activated via reverse gear and manually - Air suspension with lifting and lowering valve - Tires 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R141 - TPMS tire pressure sensors fitted on all wheels including spare wheels Surface Treatment: - Complete steel construction automatically shot-blasted with blasting machine after welding - Second blasting process with corundum for optimal adhesion of the coating system - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure best possible corrosion protection - Final coating with 2 layers of single-color 2-component topcoat in MB 7350 Novagrau Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - 3kW electric-hydraulic power unit for hydraulic controls, except for hydraulic winches - 1 spare wheel - External beam on gooseneck with mounting holes for screwable lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor on the gooseneck, checker plate at the king pin area - 2" king pin - Round NATO socket at the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross beam - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outward - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, continuously open in front of the axles up to the cross beam of the gooseneck, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm, between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, also usable as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Remote control (radio and cable) - Lifting axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system Lhjdpjya E A Nsfx Ag Njf - 4 warning boards, approx. 423 x 423 mm

Durumu: yeni, boş ağırlık: 22.700 kg, azami yük ağırlığı: 79.300 kg, toplam ağırlık: 102.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 11.000 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 920 mm, lastik boyutu: 245/70 R 17.5, renk: gri, işletme ağırlığı: 22.700 kg, Donanım: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approximately 3,750 mm long, with rear tapering of about 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6x4 and 8x4 Loading Platform: - Extendable loading platform, length approx. 11,000 mm with rear taper approx. 500 mm x 10° - A recess in the platform and into the taper for accommodating the excavator bucket arm, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected in the extendable beams and automatically adapt to the respective platform length Ramps: - One pair of two-part steel ramps, approx. 4,650 mm long and approx. 900 mm wide - Hydraulically folding ramp tips Ljdpfx Aok Af Svjg Nohf - Ramps individually hydraulically adjustable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" rubber flooring 25 mm and approx. 5 mm steel flooring as additional reinforcement on the tapered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension and Tyres: - PA-X axle system, all axles forced steered hydro-mechanically - Steering behavior of the first two axles can be optimally adjusted to the platform length both mechanically and hydraulically - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pilot pin for securing in raised position - 245/70 R 17.5 3PMSF Accessories Included: - Removable steel front wall, approx. 400 mm high - Supply line connection strip to tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of the gooseneck with mounting holes for screwable lashing rings - The first hole approx. 200 mm from the front, then spaced approx. every 400 mm - 2 pairs of screw-in lashing rings included - Checker plate covering over the gooseneck - 1 pair of removable ALU sideboards approx. 400 mm high, anodized, mounted on the gooseneck - Removable rear ALU wall on the gooseneck, approx. 400 mm high, anodized - 3.5" king pin / 2" king pin fitted - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - 4 wheel chocks - 4 axle load gauges - Mechanical fixed support legs at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical fixed support legs at the front - Continuous steel sheet flooring with painted-in sand layer on the platform for anti-slip protection - 1 intermediate table, approx. 500 mm wide, for the extending section, with elongated holes for suspended and adjustable bridging elements - Painted sand coating on the supporting surfaces of the intermediate table - Mechanical locking for securing the intermediate table in the extended position - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widening units approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing light each left and right at the rear of the vehicle - 3 kW electro-hydraulic power unit - Widening boards, loose, in reinforced steel U-frame - Radio and cable remote control - 4 warning panels, approx. 423 x 423 mm

Durumu: yeni, boş ağırlık: 15.900 kg, azami yük ağırlığı: 63.500 kg, toplam ağırlık: 68.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 12.700 mm, yükleme alanı genişliği: 2.740 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75/r17,5, renk: gri, işletme ağırlığı: 52.100 kg, Donanım: ABS, Gooseneck: Gooseneck in SNT design to optimize loading platform length, approx. 3,300 mm long, with rear taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4 and 8x4 Loading Platform: Telescopic loading platform, length approx. 9,400 mm, with rear taper approx. 500 mm x 10° A recess integrated into the platform and extending into the incline to accommodate the excavator bucket stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with tapered locking pins and reinforced locking positions; supply lines are routed safely inside the extendable beams and automatically adapt to the current platform length Axles and Tyres: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tyres Load index 143/141J (144/144F) Two-part Steel Ramps: One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide Hardwood covering Hydraulically folding ramp tips Ramps hydraulically adjustable individually: approx. 235 mm outward, approx. 215 mm inward Braking System: WABCO EBS-E brake system in compliance with EU regulations Sockets and Lighting: 24-volt lighting system Full Metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface Treatment: Entire steel structure shot-blasted automatically after welding using a blast wheel Second blasting with corundum for optimal coating adhesion Final coating with two layers of two-component paint (single colour, Nova grey), then cavity sealing with special wax Rims in silver grey Lhsdpsmfqi Iofx Ag Nsf Steel Structure: Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC, S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection strip for supply lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit with plug for electro-hydraulic unit for hydraulic control functions, except hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, then every approx. 400 mm One mounting hole at the upper rear portion of gooseneck outer beam for a bolted lashing ring Approx. 40 mm thick hardwood flooring above the gooseneck, chequer plate over kingpin area Gooseneck guide plate for the saddle plate, approx. 500 mm wide Continuous hardwood flooring (approx. 50 mm thick) over the loading platform, interrupted between the axles Locking of the loading platform using welded conical locking profiles every 250 mm, including pre-tension plate Oblong holes for insertable and repositionable bridging elements: on the fixed section behind the gooseneck at the front of the platform 1 sliding intermediate table for the telescopic tube with large cross-section Operating valves for hydraulic ramps on right side of vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering override operation, in addition to cable remote, with 2 indicator lights on receiver for one-track monitoring

Durumu: kullanılmış, azami yük ağırlığı: 39.780 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2023, bir sonraki muayene (TÜV): 01/2027, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our entire stock of vehicles, including those available for immediate or short-term delivery, on our website. Lhodpfx Agjx Uvlre Njf Extract from the equipment list. Complete specification upon request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading bed * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading bed (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyre size 205/65 R 17.5, twin-mounted Axles: * BPW axles, two fixed axles, two air-suspended self-steering axles, with drum brakes and lift/lower function * The self-steering axles have an electromagnetically controlled reverse lock, operable via reverse gear or manually Brake system: * Brake system compliant with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Steel structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer * High-quality single-colour 2-component (2K) top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 Pure White * Rims in silver Electrical system: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: * 2-inch kingpin * Galvanised steel front wall approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings mounted on the galvanised connection rail at the front * 4 wheel chocks with holders on the front wall * Mountings at the rear of the gooseneck for aluminium loading ramps * Galvanised folding supports under the rear slope of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape as per EU regulations at sides, extension, and rear * Mounts for warning plates, left and right on the gooseneck and rear panel, including socket * Mudflap at the rear of the trailer * Manual and documentation on USB stick * European reflective plates (Red-Yellow) at the rear * 80 km/h speed stickers at the rear and both sides * Audible reverse warning signal * Load pressure gauge for axle load determination, including load chart

Durumu: yeni, boş ağırlık: 12.300 kg, azami yük ağırlığı: 37.200 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 30 mm thick hardwood flooring - 3 pairs of lashing rings Lsdpfx Aotvfkfsg Nehf Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading platform with rear chamfer approx. 1,000 mm x 8° - Approx. 48 mm hardwood flooring, over the axles with checker plate surface Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering axle - Air suspension with lift and lower valve - Self-steering axle with electro-magnetic reverse lockout, activated via reverse gear or manually - Tires 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tire pressure monitoring system according to ECE R 141 - 2" king pin - One galvanized steel headboard - Yellow-red air couplings on the galvanized connection rail at the front - 4 chocks with holders on the headboard - Mounting at the rear of the gooseneck for ALU drive-on ramps - 3 height levels of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - Height-adjustable tarpaulin frame (3,960 mm) - Galvanized headboard with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - Roof brand "EDSCHA" sliding forward on ALU roof rail profiles, bolted to front and rear wall - 3 pairs of sliding stakes in the loading platform - Body rear left and right hydraulically extendable by approx. 750 mm - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm reserve length, with tension belts at spacing approx. 600 mm - Upper edge of structure approx. 3,960 mm high - Driving with open sliding roof is not permitted and will cause damage to the curtain - Cover plates for bridging the gap between ramps and loading platform - Electro-hydraulic unit at the rear, beneath the loading platform - At the gooseneck and at the ramps left and right each a bracket for warning panels incl. socket - Control valves for the ramps positioned on the right trailer side - 6 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform - Lift axle at the front axle - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in driving direction between the axles - On the checker plate on the gooseneck and loading platform, a painted sand layer for slip resistance - Central lubrication system BEKAMAX (Pico) with standard lubricant NLGI-2 and removable guard around the pump - Four warning panels extendable by approx. 400 mm, each approx. 423 x 423 mm, with position light - Load pressure gauge for determining axle loads including load chart - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then visible defined surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Durumu: yeni, azami yük ağırlığı: 37.820 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory with immediately or short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and widenings at the lower section * Between the 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) Lhedpfsw Tpqwex Ag Njf * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) - max. point load approx. 5 t/each * Recess in the beveled area and extending into the load platform for accommodating the excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontally mounted lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of outward foldable lashing rings (LC 5,000 daN) * 3 pairs of outward foldable lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN) One-piece steel ramps: * 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not have to be included in the vehicle length when in driving position Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 axles rigid, 1 axle self-steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, can be engaged via reverse gear and manually * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – Brand of our choice * TPMS tyre pressure monitoring system as per ECE R 141. Data transfer to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of both receiving and displaying this data Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system as per EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Coating: * Complete steel structure automatically shot-blasted with turbine system after welding * Second sandblasting with corundum for optimum adhesion of the coating system * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final coating with two layers of 2K topcoat, plain color RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver * Rear section metalliz

Durumu: yeni, azami yük ağırlığı: 91.640 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment specification. Complete equipment details available on request. Gooseneck * Hydraulically lift/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4. 3-Axle Compact Front Bogie * Hook mounts at front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over bridge hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm Length: approx. 7,150 mm Beam height: approx. 430 mm Beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-eye coupling for mounting a lowbed at the front, end crossmember at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendle axle Front Bogie * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position * Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres on front bogie: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J pendle axle 5-Axle Rear Bogie * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-lock pins for securing in raised position * Final axle paint finish with 2 coats of 2-component paint, solid in MB7350 Nova Gray * Technical axle load: 14,640 kg each (62 km/h) Lhodpfxsuvbdte Ag Nof * Hydraulic axle compensation * Tyres on rear bogie: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimum corrosion protection * Final coating with 2 coats of 2K topcoat, solid in RAL 3002 Carmine Red in accordance with RAL System 841GL. Rims in silver-grey Including Accessories * Steel front wall, approx. 400 mm high * Removable ALU side walls and rear wall on gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connectors on gooseneck * BEKA-MAX central lubrication for one 3-axle bogie * One 7-pin socket left and right at rear of the front bogie for warning panels * Thread insert option (ø approx. 40 mm) every approx. 500 mm on the outer top chord of the excavator deck's outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * The steel mattresses can be inserted in 2 positions to provide a lowered loading area. Please refer to the respective load diagram for permissible payload depending on width extension * Steel mattresses with rubber flooring, approx. 12 mm thick * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * Socket on rear bogie for cable remote control of rear steering * Rear bogie with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck, left and right *

Durumu: yeni, azami yük ağırlığı: 38.140 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial equipment list. Full specifications available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and a rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - Between the 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable, galvanized wheel recess covers (approx. 670 mm wide - max. point load 5 t each) - 1 pair of recessed lashing rings at the front of the loading deck (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: Tyres 235/75 R17.5 3PMSF, brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to the truck via the standardised EBS interface per ISO 11992 - For correct display, the truck must be capable of transmitting and displaying this data. Axles: - BPW axles and suspension, 2 fixed axles, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Brake system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: Steel frame made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel structure is automatically blasted after welding using a turbine blasting system - Second blasting with corundum for optimal coating adhesion - HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure top corrosion protection - Final painting with two coats of 2K paint, solid colour in RAL 3002 Carmine Red, rear section metallised and painted in RAL 9010 Pure White - No metallic paint possible - Paint finish tested in salt spray test per ISO 9227-NSS Lhodpow Tpq Dsfx Ag Nsf - Sealing of cavities with special wax Including the following accessories: - Mounts for warning signs on both sides at the gooseneck and at the rear, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - Galvanized steel front bulkhead, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - Galvanized folding supports under the loading area bevel - Hardwood impact protection on the rear wall from gooseneck to loading platform - 1 pair of recessed lashing rings along the central frame at the rear on the bevel (LC 10,000 daN) - Aluminium side walls and tailboard on the gooseneck

Durumu: yeni, azami yük ağırlığı: 33.865 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Platform * Double extendable version with rear chamfer approx. 500 mm x 8° * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 4 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of recess-mounted lashing rings at the front of the loading area (LC 10,000 daN) * 1 cross table approx. 250 mm * Hardwood flooring approx. 48 mm thick, with checker plate coverage over the axles * Cutouts in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lift and lower valve * Axle tool kit Tyres: * Tyres 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: High-quality, durable corrosion protection * High-quality 2-component (2K) topcoat painted in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Steel Construction: Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Lhodpfx Aew Tprzsg Nef Including the following additional equipment: * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front wiring panel * Spare wheel carrier in front of the front wall * Electro-hydraulic power unit * Remote steering from the front and rear via cable remote control with push buttons, with single-track axle alignment (without installation in the tractor unit) * Rear gooseneck mounting point for aluminum loading ramps * Rear hanging rail for aluminum loading ramps * Galvanized folding supports under the rear chamfer of the load platform * On the gooseneck: removable aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * Removable galvanized rear stanchions (body length approx. 2,560 mm) * Tool box, galvanized, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the load area for 1x 20', 2x 20', 40', or 45' containers * 8 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the cargo area * Galvanized wideners, extendable by approx. 230 mm per side * Movable hanging rails for aluminum loading ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps using NLGI-2 standard grease and removable protection around the pump * 2 LED reversing lamps mounted on the rear panel * HRM Metallization (High Resistance Metallisation). Complete steel structure sh

Durumu: yeni, azami yük ağırlığı: 37.680 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You will find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment features. Full equipment list available on request. Gooseneck * With approx. 30 mm hardwood flooring. Straight design at the rear of the gooseneck * 3 pairs of lashing rings (LC 5,000 daN) Load Platform * Extendable version * 5 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the load platform (LC 10,000 daN) * Cut-outs in the outer frame of the load platform for attaching tie-down straps (LC 2,000 daN) * Approx. 48 mm hardwood flooring, over the axles with checker plate covering Landing Gear * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Air suspension with lift/lower valve Braking System Lhjdpfov Etx Eex Ag Nsf * In accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction * Manufactured from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection on the standard shot-blasted welded chassis via a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-colour topcoat in RAL 3002 carmine red * Rims in silver Included Accessories * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * At the galvanized front connection rail: yellow-red air couplings * 4 chocks with holders at the front wall * Spare wheel carrier in front of the front wall * Electro-hydraulic power pack * Remote steerable axles from front and rear via cable remote control with push buttons, with single-track monitoring (installation in tractor unit not included) * European reflective plates (red/yellow) at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mounts for warning signs with socket at both the gooseneck and rear panel, both left and right * Mount for a beacon at the rear of the trailer * Galvanized folding supports under the inclined portion of the load platform * Load gauge to determine axle loads, including load chart * 7 pairs of WADER container locks for: 1x 20' or 1x 40' container on the load platform, 1x 40' container over the gooseneck or 2x 20' containers * Support block with 1 pair of WADER container locks, load capacity approx.: 20,000 kg * 7 pairs of pocket stakes for 100 x 50 mm plug-in stakes in the outer frame of the load platform * Galvanized, extendable widening brackets by approx. 230 mm per side * Adjustable hook-in rails for aluminium drive-up ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable pump protection * 2 LED reversing lights mounted at the rear * Acoustic warning signal when reversing * HRM Metallisation (High Resistance Metallisation)

Durumu: yeni, azami yük ağırlığı: 39.720 kg, toplam ağırlık: 50.960 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck * With approx. 45° chamfered front corners and rear bevel measuring approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform Loading platform in extendable design * 5 pairs of fold-out lashing rings on the sides (LC 5,000 daN) * 3 pairs of fold-out lashing rings on the sides (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles fitted with checker plate Landing legs * JOST (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles * BPW axles, two rigid, two self-steering trailing axles, with drum brakes * Air suspension with lifting/lowering function * Self-steering axle with electromagnetically operated reversing lock, activated via reverse gear or manually Lhsdju Sd U Ujpfx Ag Njf * Tyres: 205/65 R 17.5 Brake system * Wabco braking system in accordance with EU regulations, equipped with EBS-E (4S3M), without connection lines to the tractor unit Steel construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-color finishing coat in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver Included accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holder set on the front wall * Mount at the rear of the gooseneck for aluminum loading ramps * Galvanized folding supports under the loading platform bevel * Holder for beacon light at the rear of the trailer * Yellow reflector tape on the sides, extension and rear of the trailer, in accordance with EU regulations * On both sides of the gooseneck and rear panel, holder for warning plates including socket * TPMS tire pressure monitoring system in accordance with ECE R 141. Data transmission to the truck via the standardized EBS interface (ISO 11992); for correct display, the truck must be able to receive and display this data * On the gooseneck: removable aluminum side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stanchions are removable. (Body length approx. 2,560 mm) * Galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in the loading platform for accommodating 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding mounting rails for aluminum loading ramps at the rear of the vehicle * 7 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Galvanized crosswise holder under the loading platform * Galvanized extendable wideners, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control, depending on the current axle load and load condition * 5 pairs of rec

Durumu: kullanılmış, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 09/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, With every used semi-trailer, you receive a current and complete inspection and functional report. Chassis: - Robust steel frame welded construction with front frame neck and flat loading area with rear taper approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Inclined goose neck end approx. 500 x 100 mm (climbing ribs along the outer frame in the rear taper area) - Two kingpin positions with exchangeable 2” kingpin - Outer frame closed outward, constructed as a slotted outer frame - Loading platform with extendable central beam, can be extended by approx. 2,000 mm, pneumatically lockable at 500 mm intervals - Frame before and after division with 80x80 mm step - Reinforced frame design / point load in retracted position at the center of gravity - No extendable load bed wideners, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), approx. 400 mm deep - Underrun protection = extended end plate - Drop leg supports at rear Floor: - 35 mm larch timber flooring with aluminum omega profiles Lsdpfx Asywv Ixeg Nshf Axles, steering, and tires: - BPW air suspension axles, 10 to axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering system with total stroke approx. 200 mm - Second driving position via ball valve +50 mm - First axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via push button on the trailer - Third axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-bolt, hub-centered - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side boards and rear board on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum impact protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 ECE insertable reflector board at rear - 11 pairs of 10t side ZK lashing modules: - 2x on the gooseneck - 2x on the platform before extension - 7x after extension - No rear towing eyes - Extendable warning boards including 3 position lamps each at the front at the landing gear and rear before the end plate, steplessly extendable to loading width of 4,500 mm - 4 insertable sockets for warning boards in stakes pockets on the platform - 6 pairs of side stake pockets for 100x50 mm stake inserts - 2 rows of cross stake pockets for 100x50 mm stakes on the gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on the load platform from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate one 20ft container - Rubber apron mounted on underrun protection - Preparation (= cable routing for NATO cable and drilling pattern for later installation of NATO socket at the front end plate, as well as holder on the vehicle) for retrofitting electrohydraulic power unit on the right rear, for possible control of loading ramps Optional: The trailer is available with aluminum approach ramps.

Durumu: yeni, boş ağırlık: 8.900 kg, azami yük ağırlığı: 40.100 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame downturn and flat loading area, rear chamfer approx. 500x100 mm - Neck of the frame: 200 mm with beveled front corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed on the outside as a perforated outer frame - Loading platform with extendable central beam, extendable by approx. 2,000 mm, lockable pneumatically in steps of 500 mm - Frame before and after extension section with 80x80 mm step - Reinforced frame design / point load optimized in retracted state at the center of gravity - No extendable widening elements in the loading area, but prepared for retrofitting (guide tubes welded in frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle and extending to the rear end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection: extended end plate - Drop down support legs at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), automatic confirmation with manual emergency operation via button on the trailer - 3rd axle is a friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with hub-centred offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tire pressure monitoring included Accessories: - Removable side and rear boards on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underride protection - 4 wheel chocks with holders - Elongated license plate bracket on end plate - 1 removable ECE sign at the rear - 11 pairs of ZK modules 10t at the sides: - 2x on the gooseneck - 2x on the loading area in front of the extension Ledpfx Agsxnnk Do Nshf - 7x after the extension - Extendable warning panels incl. 3 position lamps each, at front on landing gears and rear before end plate, steplessly extendable to a load width of 4,500 mm - 4 holders for warning panels, mountable in stake pockets on the loading area - 6 pairs of side stake pockets for stakes 100x50 mm - 2 rows of transverse stake pockets for stakes 100x50 mm on gooseneck, from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for stakes 100x50 mm on loading area, from outer frame inwards to main frame (1x before the extension, 1x after the extension, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks suitable for 1x 20ft container - Rubber skirt fitted to underrun protection The trailer is optionally available with ramps.

Durumu: yeni, boş ağırlık: 9.800 kg, azami yük ağırlığı: 39.200 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.800 kg, Donanım: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and level loading area with rear chamfer approx. 500x100 mm Lodexgm S Dopfx Ag Nshf - Neck of frame 200 mm with beveled corners at the front - Slanted end goose neck approx. 500 x 100 mm (traction cleats on outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as a perforated outer frame - Load floor with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame in front of and after separation with 80x80 mm step - Reinforced frame design / point load in retracted state at center of gravity - Without extendable load area wideners, but prepared for subsequent installation (guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting about at the 2nd axle to the rear of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports at the rear Ramps: - 2 pcs. 2-part special-design drive-on ramps with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electrohydraulic unit) - Width approx. 800 mm - Wooden deck - Incl. traction cleats on ramps - Secured in driving position with lashing straps - Operated via control lever mounted at rear right in FR - Lateral hydraulic displacement Floor: - 35 mm larch timber floor with aluminum omega profiles Landing Gears: - Mechanical support legs, 24 t, with single-sided operation and push-balanced Axles, Steering and Tyres: - BPW air suspension axles, 10 t axle load each, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), automatic actuation with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-mount offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tire pressure monitoring Accessories: - Removable side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum collision protection - 4 wheel chocks - 1 ECE board at the rear, plug-in - 11 pairs of ZK modules 10 t side-mounted: - 2x on the gooseneck - 2x on the loading area before the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, at the front on the landing legs and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm - 4 holders for warning panels, plug-in, in stake pockets on loading area - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on loading area from outer frame to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates on the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection

Durumu: yeni, boş ağırlık: 9.400 kg, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, işletme ağırlığı: 9.400 kg, Donanım: ABS, Chassis: - Robust welded steel frame structure with a front frame offset and flat loading platform with rear bevel, approx. 500x100 mm - Neck of frame 200 mm with chamfered front corners - Beveled end swan neck approx. 500 x 100 mm (tread ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame before and after partition with 80x80 mm step - Reinforced frame version / point load in retracted position at the center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to the end of the vehicle - 1 pair wheel wells between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop legs at the rear Ramps: - 2 single-piece aluminum loading ramps, special design with spring lift system - Length x width approx. 2,500 mm x 600 mm - Can be secured for transport with lashing straps - Laterally manually adjustable Axles, steering, and tires: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total stroke approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency activation via push button on the trailer - 3rd axle as friction-steered trailing axle with electrical and mechanical lock - 12 steel disc wheels, 10-hole, with center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Includes tire pressure monitoring Lhedpexnym Djfx Ag Nof Floor: - 35 mm larch wood floor with aluminum omega profiles Landing gears: - Mechanical 24 t landing gears with one-sided operation and thrust compensation Paintwork: - Steel shot blasting, sprayed zinc coating and priming of the chassis - Painting of chassis/wheel hubs/outer frame in DB 7350 Nova Grey - Reflective tape on sides and rear in yellow Accessories: - Removable sideboards and rear wall on the swan neck, approx. 400 mm high - Spare wheel holder - Lateral aluminum side impact protection - 4 wheel chocks with holder - Long license plate holder on the end plate - 1 ECE sign at the rear, plug-in type - 11 pairs of ZK modules 10 t on the side: - 2x on the swan neck - 2x on the platform before extension - 7x after extension - Extendable warning boards incl. 3 position lights each, at the front at landing gears and at the rear in front of the end plate, steplessly extendable up to loading width of 4,500 mm - 4 plug-in warning board holders in stanchion pockets on the loading platform - 6 pairs of stanchion pockets on the side for plug-in stanchions 100x50 mm - 2 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the swan neck from the outer frame to the main frame (1x before and 1x after the king pin positions) - 3 cross rows of stanchion pockets for plug-in stanchions 100x50 mm on the loading platform from the outer frame to the main frame (1x before extension, 1x after extension, and 1x behind the 3rd axle) - 2 pairs of steel plates in the platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Durumu: kullanılmış, boş ağırlık: 10.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2025, yükleme alanı uzunluğu: 9.200 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Donanım: ABS, hidrolik arka platform, For every used semi-trailer, you receive a current and complete inspection and function report. Chassis: - Robust steel frame welded construction with front frame step-down and level loading area, rear taper approx. 500x100 mm - Frame neck 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward as perforated side member - Loading area with extendable central frame, extendable by approx. 2,000 mm in 500 mm increments, pneumatically lockable - Frame before and after division with step 80x80 mm - Reinforced frame version / point load at the center of gravity in retracted position - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle up to end of vehicle - 1 pair of wheel recesses between 1st and 2nd axle steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces, 2-part loading ramps special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting system (only in conjunction with electro-hydraulic unit) - Width approx. 800 mm - Wooden flooring - Inclined ribs on ramps - Fixable in driving position with tension belts - Operated by control lever, mounted at the rear right in the control box - Hydraulically laterally adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, steering, and tires: - BPW air suspension axles, each 10 t axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lower device with total stroke approx. 200 mm - 2nd driving level via ball valve +50 mm - 1st axle: lift axle (wired via EBS), confirmation fully automatic with mechanical emergency control via push button on the trailer - 3rd axle as steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with mid-offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear walls on the gooseneck, approx. 400 mm high - Spare wheel holder Ledpfx Agoxxl E Hj Nohf - Side aluminum underrun protection - 4 wheel chocks including holders - Elongated license plate holder in the rear panel - 1 removable ECE plate at rear - 11 pairs ZK-modules 10t on the side: - 2x on the gooseneck - 2x on the loading platform before the extending frame - 7x after the extending frame - Extendable warning boards including 3 position lamps each, at the front on landing gear and rear before rear panel; steplessly extendable up to a loading width of 4,500 mm - 4 holders for plug-in warning boards in stake pockets on the loading platform - 6 pairs of side stake pockets for 100x50 mm stakes - 2 rows of cross stake pockets for 100x50 mm stakes on gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of cross stake pockets for 100x50 mm stakes on loading platform from outer frame inwards to main frame (1x before the extension, 1x after the extension, and 1x behind 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container

Durumu: kullanılmış, toplam ağırlık: 39.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2022, yükleme alanı uzunluğu: 13.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 890 mm, Üretim yılı: 2022, Donanım: ABS, running no. 12389 LOW LOADER MAX TRAILER 3-axle F-S43-1AAF / Extendable 4500 mm / STEERING AXLE Manufacturer: MAX TRAILERS First registration: 07.2022 Dimensions: 13,400 x 2,540 x 890 mm Gross vehicle weight: 49,500 kg Unladen weight: 10,284 kg Payload: approx. 38,000 kg Fifth wheel load: 18,000 kg Air suspension with raise/lower function Drum brakes ABS EBS Mileage: 142,000 km Axle make: BPW 10.5 t Lift axle Steering axle Trailing steering axle Lashing rings Superstructure paint: red Chassis paint: GALVANIZED / RED Tyres: 12-fold Lhedpfxoy Ag Ade Ag Nsf Tyre condition: 7 - 10 mm tread Rear axle tyres: 235/75 R 17.5 MAX = FAYMONVILLE MAX 100 Ideal for concrete slabs / timber walls / concrete prefabricated parts etc. ASH 1200 mm / hardwood floor Rear loading edge: 890 mm When lowered: 840 mm Container locks for: 1 x 40/30 and 20 foot Incl. 4 x twistlocks Stanchion pockets + 5 t lashing rings on the loading area EXTENDABLE by 4500 mm in 500 mm increments Intermediate table can also be removed TRAILING STEERING AXLE Aluminium tank / HOT-DIP GALVANIZED TOP CONDITION! Currently sample images dated 06.2025 All information supplied without liability. Subject to prior sale! If you have any questions about this or other vehicles, please call us.

Durumu: kullanılmış, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2011, yükleme alanı uzunluğu: 9.400 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, toplam uzunluk: 12.700 mm, toplam genişlik: 2.540 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: mavi, Üretim yılı: 2011, Donanım: ABS, = Additional Options and Equipment = - Lift axle = Remarks = SAF axle with drum brakes. 1 x lift axle. 1 x steering axle – self-tracking / trailing steering. = Further Information = Axle configuration Tire size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Rear axle 2: Twin tires; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70% Rear axle 3: Twin tires; Steered; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Weights Unladen weight: 10,500 kg Lhjdpfx Aoy Daxzeg Njf Payload: 44,500 kg Gross vehicle weight: 55,000 kg Identification Type number: STN-3U / HYDRAULIC RAMP / LIFT A = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from the published texts.

Durumu: yeni, toplam ağırlık: 78.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 850 mm, lastik boyutu: 245/70 R 17.5, renk: gri, Donanım: ABS, Gooseneck: • Gooseneck in SNT design to optimize the load floor length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° • For tractor units: 4x2, 6x2, and 6x4 Load Floor: • Extendable load floor, approx. 8,800 mm long with rear taper approx. 500 mm x 10° • Recess in the load floor, extending into the taper, for receiving the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward • Hardwood covering on the sloped portion of the load floor • Ramp with hardwood cladding • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent suspension with BPW stub axles, 1st axle steered ahead, all other axles forcibly steered via hydromechanics • 1st axle fitted with electro-magnetic reverse lockout, engaged via reverse gear or manually • Technical axle load: 12,000 kg • Hydraulic axle compensation, hydraulic cylinders with shut-off valves • Tyres: 245/70 R 17.5 • TPMS tyre pressure monitoring system compliant with ECE R 141 Accessories included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holders • Yellow-red air couplings on the front connection plate • 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches • 1 spare wheel • 2 pairs of screwin lashing rings • 1 pair of horizontal lashing rings at the rear of the gooseneck • Removable ALU side panels on the gooseneck, approx. 400 mm high, anodized • Removable ALU rear panel on the gooseneck, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking over the gooseneck, over the king pin tread plate decking • 3.5" king pin Lodpfx Aervw U Seg Nohf • Guide plate from gooseneck for fifth wheel, approx. 500 mm wide • Load floor locking with conically welded locking profiles every 250 mm • Includes pre-stress plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the external frame of the load floor • Extendable galvanized widenings, approx. 230 mm per side • 1 pair of fixed wheel wells, open to extension, approx. 700 x 410 mm, in the load floor ahead of the 1st axle • Wheel wells with sheet metal cover and 15 x 15 mm square climb strips, approx. every 200 mm • 1 pair of fixed wheel wells, approx. 1,480 x 700 x 410 mm, in the load floor between the 1st and 2nd axles • Wheel wells with 15 x 15 mm square climb strips and extensions in the lower section • ALU covers for the wheel wells between the 1st and 2nd axles, can also be used as widening boards • 1 pair of mechanical rear supports • Square climb strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the load floor taper • Central lubrication system with 1 pump, BEKAMAX brand, using standard NLGI-2 grease • Radio and cable remote control, with 2 control lights on the receiver for single-channel monitoring • WABCO Smart Board system • Smart Board equipped with an odometer • 4 warning panels, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mountings for rotating beacon

Durumu: kullanılmış, boş ağırlık: 16.500 kg, azami yük ağırlığı: 67.500 kg, toplam ağırlık: 84.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 02/2025, yükleme alanı uzunluğu: 8.800 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 925 mm, süspansiyon: hava, lastik boyutu: 235/75 R 17.5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For each used trailer, you receive a current and complete inspection and functional report. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 10° taper - Suitable for tractor units: 6x2, 6x4, and 8x4 short Extendable bed: - Loading platform in double-extendable version, approx. 8,800 mm length with approx. 500 mm x 10° taper at the rear - A support plate approx. 300 mm wide is welded to the middle beam, with elongated slots at the front and rear for hook-in and adjustable bridging elements Hydraulic loading ramps: - Detachable ramp bar with mounts for EU reflectors, warning panels, and speed stickers - Hardwood covering on the tapered section of the loading platform - Control valves for the hydraulic ramps located on the right-hand side of the vehicle Axles and tires: - BPW axles and suspension, 1st axle steered ahead, all other axles hydro-mechanically forced steered - 1st axle with electromagnetic reverse lock, activated via reverse gear or manually - Technical axle load: 12,000 kg Ledpfxsyvrvcs Ag Nshf - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS pressure sensors mounted in all wheels including spare wheels Accessories included: - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the connection bar - 3 kW electro-hydraulic unit for hydraulic functions, except hydraulic winches - 1 spare wheel - Outer beams of the gooseneck with fixing bores for bolted lashing rings - The first bore approx. 200 mm from the front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of horizontal lashing rings in the rear section of the gooseneck (LC 10,000 daN) - On the gooseneck, 1 pair of removable ALU sideboards, approx. 400 mm high, anodized - On the gooseneck, a removable ALU rear wall, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood flooring above the gooseneck - 3.5" king pin - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - Round NATO socket on the connection bar at the front - One-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical landing gear with 2-speed transmission and crank - JOST Modul B – static test load = 50,000 kg - Continuous 50 mm thick hardwood floor on the bed and between the axles discontinuous - Securing of the bed with conically welded locking profiles; for the first 3,000 mm extraction of the extension tube with large cross-section, a locking point every 500 mm, then every 1,000 mm - On the extension tube with small cross-section, a locking point approx. every 3,000 mm and at max extension - Elongated holes for hook-in and movable bridging elements: at the front of the load bed - 1 pair of lashing rings on the transverse beam at the front (LC 10,000 daN) - 7 pairs of recessed, fold-out lashing rings in the outer frame of the load floor (LC 10,000 daN) - Extendable widenings, approx. 230 mm per side - 1 pair of mechanical rear supports - Central lubrication system with 2 pumps, brand BEKAMAX - Radio and cable remote control - 2 axle load gauges mounted on the left side including axle load diagram - 1st axle with automatic lift axle function - 4 warning panels, approx. 423 x 423 mm, extendable by approx. 1,000 mm

Durumu: kullanılmış, makine/araç numarası: YAFTL4005F0017017, dingil konfigürasyonu: 3 aks, ilk tescil: 01/2015, toplam uzunluk: 13.900 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 3.300 mm, süspansiyon: hava, lastik boyutu: 245/70 R17.5, renk: diğer, Üretim yılı: 2015, = Additional Options and Accessories = - Drum brakes = Notes = Chassis Kingpin / fifth wheel diameter: 2 inches Kingpin / drawbar height: 120 cm Drum brake: ✓ Structure Year of manufacture: 2015 Special transport Hydraulic ramps: ✓ Length over axles: 880 cm Load floor length: 880 cm (extends to 660 cm) Gooseneck length: 420 cm Low loader: ✓ Maximum width: 3 cm (275 cm) Maximum length: 1540 cm (880 + 660 cm) Extendable: ✓ Telescopic: ✓ = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; left inner tread: 45%; right inner tread: 60% Middle axle 1: Twin tyres; left inner tread: 20%; right inner tread: 30% Lhjdpfxjxyffps Ag Njf Middle axle 2: Twin tyres; steered; left inner tread: 55%; right inner tread: 40% Rear axle: Twin tyres; steered; left inner tread: 40%; right inner tread: 50% Weights Unladen weight: 11,750 kg Payload: 61.0 kg gross vehicle weight (GVW): 73,000 kg Functional Body manufacturer: Faymonville F-S44-1ALN Loading height: 85 cm = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Durumu: yeni, boş ağırlık: 9.450 kg, azami yük ağırlığı: 35.550 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.500 mm, yükleme alanı genişliği: 1.560 mm, toplam genişlik: 2.550 mm, lastik boyutu: 385/65 R 22,5, renk: gri, Donanım: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate surface - Front bevel approx. 45° - Hydraulic lifting rocker, lifting and lowering range approx. -280/+250 mm - Two kingpin positions at 2,300 and 2,000 mm - For tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, approx. 9,500 mm long, with angle profiles underneath for pallet accommodation (distance kingpin to axle centre approx. 8,000 mm) Axles, Suspension, and Tyres: - BPW stub axles, with drum brakes, independent wheel suspension, hydraulic axle equalisation with lift and lower function - Lowering lock on axles in case of suspension airbag rupture, designed for max. pallet height of 150 mm - Tyres: 385/65 R 22.5 - TPMS tyre pressure monitoring sensors mounted on all wheels including spare wheels - TPMS system in accordance with ECE R 141 Ljdjygvc Hspfx Ag Nshf Surface Treatment: - Complete steel structure automatically shot-blasted with blast wheel unit after welding - Second blasting with corundum for optimal coating adhesion - HRM metallisation of entire chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimum corrosion protection - Final coating: 2 coats of 2K topcoat, single colour in Novagrau (DB 7350) - Paint structure tested in salt spray test according to ISO 9227-NSS, cavities sealed with special wax Standard Accessories: - Removable steel front wall, approx. 400 mm high - Tool box with lid recessed at rear of gooseneck, approx. 640 x 700 x 215 mm - Plug-in ALU rear wall on gooseneck, approx. 400 mm high, anodised - One pair foldable ALU side walls on gooseneck, approx. 400 mm high, anodised - 2" kingpin - 3 pairs recessed lashing rings on gooseneck (LC 6,300 daN) - At the front connection rail, yellow-red air couplings, lighting for operating gooseneck, suspension and hydraulic bracing with on/off switch - Mechanical drop tube supports for approx. 48,000 kg support load - Boarding ladder mounted on front right with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN) - On the longitudinal beams, grating inserts level with guide rails of cargo restraints - Hydraulic pre-installation incl. control unit for mounting 3 pairs of our hydraulic cargo restraints - First and last axle liftable manually left and right - Storage boxes behind the axle unit left and right, splash-proof - Rear taper for easier pallet insertion - Rear cross member with lugs for mechanical bracing - 7-pin socket at the rear cross member - Electro-hydraulic unit - 4 wheel chocks with holder - 2 axle load gauges mounted on the left incl. axle load chart - 3 pairs of hydraulic cargo restraints with swivel arms, slideable on longitudinal beams - Rear door with cross bracing, hinged left, hydraulically locked right, can be latched horizontally at 90°, 105°, and 270° - Fold-up underride guard for transporting up to 4 empty standard pallets - 1 spare wheel - Number plate with bracket incl. lighting, rear left on trailer - Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, for standard grease