Kullanılmış Gigant G1230Gbr satın al (133)

Durum: ikinci el, azami yük ağırlığı: 46.300 kg, toplam ağırlık: 64.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2001, Complete braking system overhauled, including brake shafts, brake cylinders, etc. Truck is in good condition. All tyres Michelin 90%. Goldhofer STZ Gooseneck 24 t Load length: 3,500 x 2,480 mm Interchangeable 2" king pin Built-in hydromechanical steering Designed for a saddle load up to 24 tonnes Aluminium drop sides, 4-sided Steering angle: 2,700 mm for 4-axle tractor unit Low-bed bridge Low-bed with internal tube Low-bed length: 7,800 mm, telescopic by 4,800 mm Flatbed width: 2,550 mm Construction height: 350 mm Loaded platform height approx. 550 mm with 200 mm ground clearance Djdewn Awhopfx Al Rekr 4-axle chassis Air-suspended chassis (LxW) approx. 5,730 x 2,550 mm including lift and lower valve, with 4 forced-steered axles, Manufacturer: Gigant, axle spacing 3x 1,310 mm Ride heights: 925 mm (+/-100 mm) Braking system: two-line, all-wheel compressed air brake system Progressive central lubrication system, manufacturer: BEKA-MAX Coupling height when loaded: 1,290 mm All 4 axles with hydraulic forced steering Electrical power pack Radio remote control

Durum: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Front & rear warning panel sets * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V - 15-pin as well as additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, height infinitely adjustable * Tool box made of powder-coated steel sheet and basket-style spare wheel holder on the right * Front closed plastic mudguards (single), rear straight steel spray aprons each with spray suppression * Side underrun protection * 500 mm forward offset extension * Fifth wheel platform extended to the front by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor over the fifth wheel platform: 50 mm softwood, in the low-loader platform: 60 mm softwood * Outer boards of loading ramps: 50 mm bamboo wood * Four stake pockets per side (no stakes included), each also providing a 2 t lashing option * Load securing package (Lasi package) consisting of: 2 lashing eyes (6.4 t) front left and right on the main frame of the fifth wheel platform; 1 pair of 13.4 t lashing rings front and rear on the outer frame, 4 pairs of 10 t lashing rings per side—swiveling, lowerable, all-directional load, recessed in the frame; 2 pairs of 6.4 t lashing rings on the shovel recess, 8 pairs of galvanized folding extensions for 3 m overall width (not on rear slope) * Extension planks for widening, stored left side in the storage compartment * Shovel recess above the rear axles to the end of the approach slope: approx. 2,300 x 740 x 190 mm Djdpfx Ajrczm Djl Rskr * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized loading ramps: approx. 3,000 x 720 mm * Hydraulic side ramp shift on sliding pipe from the ramp shaft * Load platform above fifth wheel: approx. 2,990 x 2,520 mm, rear loading platform: approx. 6,280 x 2,520 mm * Loaded platform height: approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps, rear mechanical folding supports: hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2024, ETÜ-TA-R 19.0 ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Tool box made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted right side, black powder-coated * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drilling rig transport on the chassis – loading height + 20 mm * 50 mm softwood floor in clamped design * Preparation in front of front wall for retrofitting container locks * Front wall bolted, made from smooth sheet metal * Side walls made of profiled steel sheet – drop-down, with spring assistors * Rear wall, steel, slides between ramps – storage bracket in front of the front wall when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * In each corner at the front and rear: 1 x 10 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm ----Tyres: Dsdpfepk D D Hsx Al Rekr * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a shade of black * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork in a RAL color of your choice available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-ER 19.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering facility ----Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flange drawbar eye and 110 mm height adjustment via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing leg at front * External folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped design * Fittings in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet * Split steel side walls, trapezoidal-profiled, foldable with folding stake in the center * Steel rear wall, slide-in between ramps (storage bracket for non-use inside in front of bulkhead) * Rear stakes bolted ----Load securing: * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashings every 600 mm * Load securing package: in front and rear corners, each 1 x 10 t UVV-rated lashing point, each side 2 x 8 t UVV-rated lashing rings, retractable in outer frame; various holes for 1.2 t lashing option in front and rear cross members ----Ramps: * One-piece slide-in ramps, 12 t / pair, approx. 2,750 x 620 mm * Rear driving slope approx. 860 mm ----Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, bulkhead, rear gate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air tanks, flange drawbar eye, and landing leg painted in black shade--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted / subject to change Dedpemi Tmasfx Al Rskr ----Delivery time: * Immediately available from Egestorf

Durum: ikinci el, boş ağırlık: 7.800 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 07/2006, yükleme alanı uzunluğu: 9.100 mm, yükleme alanı genişliği: 2.750 mm, süspansiyon: hava, lastik boyutu: 235/75 R17,5, renk: gri, Donanım: ABS, Kampanalı fren Taşıma kapasitesi 22.200 kg Kauçuk zemin Hidrolik çift rampalar ve hidrolik kaydırma Gigant akslar Hatalar hariçtir Dksdpfx Alewh Rwve Rer

Durum: ikinci el, boş ağırlık: 5.660 kg, azami yük ağırlığı: 27.340 kg, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/1998, yükleme alanı uzunluğu: 12.200 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1 mm, toplam uzunluk: 2.500 mm, toplam genişlik: 1.850 mm, süspansiyon: hava, lastik boyutu: 385 / 65 R 22,5, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 3 axles, air suspension, first axle liftable, ABS (anti-lock braking system), lashing rings Dkodpfx Alsi Rm Uvj Ror Body: platform, loading height approx. 1300 mm, drum brakes, Gigant axles ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Durum: ikinci el, boş ağırlık: 3.500 kg, azami yük ağırlığı: 7.000 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2001, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.650 mm, toplam uzunluk: 2.550 mm, toplam genişlik: 3.850 mm, süspansiyon: hava, lastik boyutu: 235 / 75 R 17,5, dingil mesafesi: 990 mm, renk: kırmızı, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, kaza yaptı, Vehicle location: Bovenden, air suspension, curtain side and drop frame, tandem axle, raise/lower function, ABS (anti-lock braking system), front support, rear support. Dodpfx Aji Rqtmel Rekr Wheelbase: 990 mm Body: Curtain side with drop frame Height-adjustable towing device, Gigant axle (first axle missing!!!), 60 cm side panel height, front wall approx. 2m Price with defective axle, reconditioned: €5,900 net ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted.

Durum: ikinci el, boş ağırlık: 10.680 kg, azami yük ağırlığı: 29.320 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 08/2011, bir sonraki muayene (TÜV): 12/2026, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.510 mm, yükleme alanı yüksekliği: 970 mm, süspansiyon: hava, lastik boyutu: 245/70R17.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 4 dingilli, döner tabla, havalı süspansiyon, ABS (anti blokaj sistemi), 3 metreye kadar genişletilebilir, bağlama halkaları, hidrolik rampalar, arka destek, ikiz tekerlek, teker çukurları Üst yapı: Hidrolik çıkış rampalı 4 dingilli alçak şasi römork, 4x 10 ton Gigant dingil, kampanalı frenler! Rampa uzunluğu yaklaşık 2.850 mm! Yükleme yüksekliği yaklaşık 970 mm! Dodpfxjxx A H Is Al Rjkr Önde yaklaşık 600 mm ve arkada yaklaşık 670 mm teker çukuru yüksekliği! Römorka yeni bir döner tabla takılmıştır! AKSESUAR BİLGİLERİ GARANTİSİZ OLUP, değişiklik, ara satış ve yazım hataları saklıdır!

Durum: ikinci el, boş ağırlık: 3.240 kg, azami yük ağırlığı: 9.760 kg, toplam ağırlık: 13.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 10/2014, yükleme alanı uzunluğu: 5.100 mm, yükleme alanı genişliği: 2.410 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 245/70R17.5, renk: beyaz, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 2 aks, tandem, yaprak yaylı, ABS (anti blokaj sistemi), sabitleme halkaları, yan koruma, yerleştirilebilir yükleme rampaları, ön destek, arka destek, sarkaç kapaklar, yükseklik ayarlı çekme oku. Üst yapı: 3 tarafı devirmeli dorse, yükleme rampalı. Arşiv görselleri! 2x Gigant aks! Yükleme yüksekliği yaklaşık 950 mm! Yükleme rampaları, net 1.000,00 € ek ücret karşılığında mevcuttur! AKSESUAR BİLGİLERİ GARANTİSİZ, değişiklik, ara satış ve hatalar saklıdır! Dkodpfjy T Sfljx Al Rjr

Durum: ikinci el, boş ağırlık: 4.400 kg, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2012, yükleme alanı uzunluğu: 6.770 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.000 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5, renk: siyah, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, lift and lower function, ABS (anti-lock braking system), lashing eyes, container locking system, twin tires, storage box Body: 2-axle turntable flatbed trailer with removable stakes and twist-lock fastenings, twist-locks extendable to 3 m. 20 t, drum brakes, air suspension, 10 t Gigant axles, ramp recess 40x16 cm. Dodpjt Uq D Tofx Al Rjkr Loading ramps available for an additional €1,000! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted.

Durum: ikinci el, boş ağırlık: 11.000 kg, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2015, bir sonraki muayene (TÜV): 04/2027, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.720 mm, yükleme alanı yüksekliği: 950 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, 5 axles, turntable steering, air suspension, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, 2-part access ramps, hydraulic ramps, rear support, side aluminium underrun protection, twin tyres. Dkedpfxoy U N Nws Al Rer Body: 5-axle low-loader trailer with hydraulic 2-part loading ramps, 5x 10 t Gigant axles, drum brakes, last axle with trailing steering! The brake pads on the first 3 axles have been replaced with new ones! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Durum: ikinci el, boş ağırlık: 19.880 kg, azami yük ağırlığı: 40.120 kg, toplam ağırlık: 60.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 03/2021, yükleme alanı uzunluğu: 7.700 mm, yükleme alanı genişliği: 2.850 mm, yükleme alanı yüksekliği: 350 mm, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2021, Donanım: ABS, Şasi: - Ön ve arka şasi kıvrımlı, düz alçak platformlu, eğimsiz çelik çerçeve kaynak konstrüksiyonu - Ön köşeler 400 mm x 400 mm eğimli - Alçak platform, yaklaşık 5.400 mm uzatılabilir iki çekilebilir şasiye sahip, biri 400 mm, ardından her biri 500 mm’lik kademelerle pnömatik kilitlenebilir - 1.833 mm’de 30 ft konteyner için kilitleme - 4.900 mm’de 40 ft konteyner için kilitleme - Kayar ara destek yaklaşık 500 mm genişliğinde, sadece araç teleskopik haldeyken kullanılır (toplanmış durumda ara destek yoktur) - Değiştirilebilir 2" ve 3,5" king pinli beşik plakası - Maks. nokta yükü: Toplanmış durumda 4 m üzerinde 50 ton - Aks grubu üzerinde sürekli ekskavatör kanalına sahip, katlanabilir alüminyum kapaklı - 2 adet, her biri 1.500 mm uzunluğunda kilitlenebilir kapak. Arka bölüm sabit alüminyum kapaklı, elektro-hidrolik ve merkezi yağlama sistemi için - Alçak platform arka kısmında mekanik pim yastıklı kuplör, platformda ön gerilim için Boyun: - Hidrolik olarak eğilebilen ve yüksekliği ayarlanabilen boyun - Destekleme, çekici aracı üzerinde iki hidrolik silindir ile sağlanır. Kumanda elektro-hidrolik ünite üzerinden yapılır - Boyun üzerinde alçak platform yükleme yüzeyi ve ara dişli için kombine bağlantı - Boyun farklı king pin yükleri için anahtar ile (18/24 ton) Akslar, Direksiyon ve Lastikler: Dkedpfxezd Tdze Al Rsr - Gigant düşük şasili yarı römork akslar, her biri 12 ton aks yükü - Hidrolik süspansiyon, kaldırma mesafesi yaklaşık 300 mm, sürüş yükseklikleri hidrolik olarak ayarlanabilir - S-kam fren 300/150 mm, asbestsiz fren balataları - Otomatik bağlantı ayarlayıcı - İz genişliği 1.995 mm, dingil mesafesi 1.510 / 1.510 mm - Süspansiyon için arkada sağda ve solda kontrol kolu - 1. aks (ara dişli ünitesi), king pin bağlantısı üzerinden hidrolik zorunlu yönlendirilir - 2., 3. ve 4. akslar king pin bağlantısı ve dingil mili üzerinden hidrolik zorunlu yönlendirilir - Boyunun elektro-hidrolik ünitesi ve çekici araçtan NATO prizi ile beslenen elektrikli-hidrolik ünitesi ile elektro-hidrolik arka yönlendirme - Kumanda kablosu ve çıkış kutusu ön ve arka bitim levhasında - Kablolu uzaktan kumanda ve ayrıca radyo uzaktan kumanda - 13 / 17 lastik 245/70 R 17,5 146/146F, tubeless Ara Dişli Ünitesi: - 1 akslı, boyun ile alçak platform arasında monte edilebilir - 12 ton taşıma kapasiteli yarı aks, hidrolik süspansiyon - Dört adet lastik - Fren hortumları bağlantı başlıklarıyla, hidrolik hortumlar ise çoklu (6’lı) bağlantı ile birleştirilir - Aks, kesme vanası ve pim sayesinde kaldırılabilir Aksesuarlar: - Ön duvar = Komple genişlikte, 600 mm yüksekliğinde, 550 mm derinliğinde üstten kapaklı ve solda-sağda yan kapaklı çelik sac alet kutusu - Ön eğime göre uyarlanmış köşeler - Yan duvarlar 25 mm alüminyum profil, 600 mm yüksekliğinde, tek parça, alçak platformdan 500 mm önceye kadar, katlanabilir - Takılabilir alüminyum arka duvar ve arka köşe direkleri, yan duvar yüksekliğinde - Son levhada uzun plaka tutucu - Son levhada 2 adet ECE uyarı tabelası - Yüksek platformda, her biri 4 ton çekme kapasiteli gömülü 3 çift yük halkası, yaklaşık 1.500 mm önden montajlı - 3 çift ağır hizmet yük halkası, her biri 13,4 ton çekme kapasiteli; bunlardan 1 çift yüksek platformda, birer çift de yüksek platformun orta kısmının önünde ve arkasında boyuna kirişi üzerinde asılı monte edilmiş - Her iki tarafta alçak platformda katlanabilir genişletmeler, toplam genişlik 3.000 mm - Yük genişliği 5.000 mm'ye kadar sonsuz uzatılabilir uyarı levhaları - Ön taraftan alçak platforma çıkmak için y

Durum: ikinci el, Üretim yılı: 2022, Donanım: basınçlı hava freni, ASW 271 GIANT (0010) ikinci el Fliegl ASW 271 Gigant (0020) Tandem aks, yaprak yay, takipli yönlendirme (0030) K80, alt bağlantı, havalı fren, (0040) Lastikler: 560/60R22,5 BKT, Dkedpfx Alow Sftfo Rsr

Durum: ikinci el, azami yük ağırlığı: 5.900 kg, toplam ağırlık: 9.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2020, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, yükleme alanı hacmi: 5 m³, Donanım: ABS, * ABS Djdpfx Ajyncyhsl Rekr * 5 odacıklı arka stop lambaları * Yüksekliği ayarlanabilir çekici tertibatı * Gigant akslar * Ön destek makarası ---Üst yapı: Alçak platform römork, yaklaşık 870 mm yükleme yüksekliği, arkaya eğimli, yaklaşık 780 mm rampa yüksekliği, yay destekli çelik yan paneller (sağ ve sol), ahşap zemin, bağlama halkaları ve fiksatör halkaları. Yay destekli ve yana kaydırılabilir rampalar, kaymaz sıcak daldırma galvanizli kafes saclı (yaklaşık 2.600 mm uzunluğunda), arka destek rampanın kumandasıyla otomatik olarak entegre çalışır, plastik alet kutusu ön panelin önünde yer alır. Şasi, ön panel, çekme oku, arka panel, rampalar ve payandalar sıcak daldırma galvanizlidir. Satış sadece ticari işletmelere yapılır. İHRACATTA SADECE NET FİYAT ÖDENİR!!!!! TÜM BİLGİLER VE EKİPMAN+AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmeleri için genel satış şartlarımız geçerlidir (İmpressum'a bakınız).

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brake System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and adjustable height ----Lighting / Electrics: * EBS multi-voltage system with 12 & 24 V wiring * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) ----General Attachments: * Manometer – pressure gauge for payload determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: plastic quarter mudguards with splash protection * Rear axle: straight galvanized steel skirts with splash protection * Reflective contour tape on sides and rear * Tool box made of galvanized steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Platform: * Forepart in front of the turntable platform approx. 490 mm long with 45° corners * Robot-welded anti-slip coating on the turntable platform steel deck * Hardwood flooring on running surfaces of the low loader platform ----Load Securing (La-Si Package, consisting of): * In front of the bulkhead carrier left & right, each with 1 x 13.4 t UVV lashing ring * Four holes per side in the turntable platform, each with 2 t lashing capacity * 1 pair of 13.4 t lashing rings suspended at the rear left & right in front of the rear crossmember * Four pairs per side of 10 t foldable and lowerable UVV lashing rings, loadable in all directions, integrated into the outer frame * Three stake pockets per side, each with 2 t lashing option ----Widening Package: * Hot-dip galvanized mechanical folding outriggers for 3 m total width (not in the sloping rear) * Board holder for extensions mounted longitudinally under the chassis on the left ----Excavator Arm Rest: * Excavator arm rest from rear axle to end crossmember, approx. 2,100 mm long and approx. 190 mm deep * Two pairs per side of 6.4 t lashing rings in the excavator arm rest ----Ramps: * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable side-to-side * Outer boards of the loading ramps made of hardwood * Steel structure prepped for 6-way control valve Dksdel Tlhrspfx Al Rjr ----Loading Height: * Unladen loading height approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical drop-down supports, and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black ----Information: * Vehicle has a day registration dated 07/2024, due to the missing tire pressure monitoring system and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly Dkjdpsl Thy Refx Al Rsr ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.800 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Dedpfjrwc R Rex Al Rskr * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal - no installation required on truck side * 15-pin power plug * LED lighting system 12 / 24 V * EBS multivoltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Fold-out support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision for subsequent installation of container locks in front of the bulkhead * Bolted 400 mm bulkhead made from smooth sheet * Rear stakes bolted * Side boards with spring-assist lifting ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 tonne lashing force every 480 mm * Installation of 3 tonne folding lashing rings possible every 600 mm * Each corner at front and rear equipped with 1 x 6.3 tonne lashing ring * Various drillings in front and rear cross members for 1.2 tonne lashing option * Profifix lashing rail centrally along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for truck-side hydraulic pump flow rates over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange-eye painted in black * Side boards painted in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Info: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Durum: yeni, azami yük ağırlığı: 30.740 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lower function and RtR valve * Smard-Board for load weight measurement * Warning panel packages at front & rear * Side and rear reflective contour tape * Rotating beacon (removable) at rear * LED lamp * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight steel mud flaps with splash guards at the rear (spray suppression) * Side underrun protection * Extension of the turntable platform at front by 520 mm with 45° corners and three recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Platform floor over turntable platform made of 50 mm and in low-loader platform of 60 mm coniferous wood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets each side (stakes not included), with simultaneous 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform * Two pairs of 13.4 t lashing rings each at the front and rear of the side outer frame, and four pairs of 10 t lashing rings each side, swiveling and lowerable * Loadable in all directions and recessed into the outer frame * Two pairs of 6.4 t lashing rings at the excavator stick recess on each side Dsdpfol Tik Njx Al Rekr * 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored in side left storage compartment * Excavator stick compartment above rear axle up to end of drive-on slope, approx. 2,100 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm, incl. hydraulic side ramp shift and load holding valve * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height laden: approx. 890 mm, +/- 20 mm (including 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers and mechanical support legs hot-dip galvanized * Axles, drawbar, air reservoir and slewing ring painted in black * Tires 235/75 R 17.5 * New vehicle without first registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, on the A7

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket Djdpfeq Dyvyox Al Rokr ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards Dkedpepk D Dqjfx Al Ror ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durum: ikinci el, azami yük ağırlığı: 31.000 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 07/2024, yükleme alanı uzunluğu: 9.290 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment ----Lighting / Electrical System: * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at the rear * 2 LED reversing lights (switched by reverse gear) ----General Attachments: * Manometer - pressure gauge for determining load weight (axles separated over 2 air suspension circuits) * Side underrun protection * Swing-out supports at rear of chassis frame * Mechanically adjustable warning board sets front and rear * Front axle plastic quarter mudguards with spray protection * Rear axle straight galvanized steel mud flaps with spray protection * Reflective contour tape on sides and rear * Toolbox, black powder-coated galvanized steel, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low Loader Deck: * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOT-WELDED anti-slip covering on steel plate of the turntable platform * Hardwood flooring on running surfaces of the low loader deck ----Load Securing (load securing package includes): * In front of the front wall carrier left & right, 1 x 13.4 t UVV lashing point each * 4 holes per side in the turntable platform, each with a lashing capacity of 2 t * 1 pair of lashing points (13.4 t) suspended at the rear left & right in front of the rear cross member * Per side 4 pairs of UVV lashing rings (10 t), swiveling and lowerable, loadable in all directions and recessed into the outer frame * Per side 3 stake pockets, each with a simultaneous 2 t lashing option ----Widening Kit: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (except at the rear bevel) * Plank holders for extensions under the chassis, left side in longitudinal direction ----Excavator Arm Rest: * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 t lashing points per side in the excavator arm rest ----Ramps: * Hydraulically operated, one-piece drive-on ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer planks on the ramps made of hardwood * Steel construction prepared for 6-function slider valve ----Loading Height: * Loaded edge (unladen) approx. 950 mm +/- 20 mm ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: Dkodpfxel Tnu As Al Ror * Chassis, turntable frame, folding outriggers, mechanical drop supports, ramps galvanized * --Axles, air tank, drawbar painted in black tone-- ----Info: * Vehicle has a temporary registration in 07/2024 due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Immediately available from Egestorf

Durum: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: Dedepk Dv Rspfx Al Rekr * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durum: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: Dksdel Tilxepfx Al Rjr * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Durum: yeni, azami yük ağırlığı: 13.830 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 4.995 mm, yükleme alanı genişliği: 2.380 mm, yükleme alanı yüksekliği: 900 mm, Üretim yılı: 2026, * KA-TA-R 18 ----Braking System: * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal -no truck-side installation required- * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Towing Eye: * Drawbar with 50 mm flange-type towing eye (adjustable by +77 mm and -33 mm via offset plate) ----General Attachments: * Support winch at front * Foldable galvanized steel underrun protection for paver feeding * Closed single plastic mudguards * Front wall platform made of grating with access step at drawbar and handrails on the front wall ----Chassis: Dedex Ipbyjpfx Al Rokr * Chassis made of high-tensile fine-grain steel ----Tipping Body: * 3-way steel tipper body with asymmetrical continuous aluminium side walls - without central stanchion - swinging via manual central locking, can be folded down on the left with side board spring-assist * Tailgate - made of HBW 400 steel - swinging with automatic 2-claw locking * 5 mm steel floor made of HBW 450 steel ----Load Securing: * 4 x 3 t lashing rings per side - recessed and foldable - integrated into the steel floor ----Tarpaulin: * Rolling tarpaulin - agate grey similar to RAL 7038 - * Tarpaulin tensioning with side-mounted tensioning ratchets and elastic cords at the front and rear ----Painting: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air tanks, support winch, and flange-type towing eye painted in a black tone * Side panels painted in a RAL color of your choice (except special or metallic paint), changeable up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t * New vehicle without initial registration including manufacturer's warranty * Subject to errors and prior sale * Sample images (photos may differ due to optional equipment) ----Delivery time: * Vehicle available from week 42/2026

Durum: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: Dedpjl Th Dmofx Al Rekr ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7