Kullanılmış Müller Mitteltal T4 Rmb 40 Hydr. Ramp. Radmulde satın al (16.171)

Durumu: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 Nedpeylfvgjfx Ag Nscr ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Durumu: kullanılmış, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2002, Kasa-Damper dorse kombinasyonu. Azami toplam ağırlık 10.500 kg, taşıma kapasitesi 7.550 kg. 3 yönlü damper üst yapı, yaklaşık 5.000 x 2.420 x 400 mm (iç ölçüler), 4 adet yük bağlama halkası, merkezi kilitlemeli salınan ve katlanabilir çelik yan paneller. Damperin altında kilitlenebilir bölmelerde 1 çift alüminyum rampalar. Yüksüz yükleme yüksekliği yaklaşık 900 mm. Ön tarafta iki vitesli destek ayağı, arka tarafta katlanabilir destekler. 40 mm çeki oku, yüksekliği kademesiz ayarlanabilir çekme borusu. 2 hat havalı, 1 hat hidrolik, 24 volt. BPW akslar, parabollü süspansiyon, ABS. Lastik: 235-75R17.5. Şasi gri, damper köprüsü yeşil. Muayene Haziran 2026’ya kadar geçerli. Mevcut haliyle satılır. Alüminyum rampalar = Ek Bilgiler = Ncsdpfx Ageyw Hw Rj Nor Boş ağırlık: 2.950 kg Taşıma kapasitesi: 7.550 kg Azami toplam ağırlık: 10.500 kg Ön lastik: 235-75R17.5 Arka lastik: 235-75R17.5 Üretim ülkesi: DE Daha fazla bilgi için lütfen Jan-Marc Schwickert ile iletişime geçiniz.

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering function for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin, 24 V connector * LED tail lights 12 / 24 V integrated into rear underrun protection ----General Attachments: * Front support winch * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Steel pallet - 3-way tipper body made from high-tensile steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed bulkhead made from smooth steel sheet * Hardwood pad for excavator bucket, bolted to the bulkhead Ncsdpfxovin Uco Ag Nor * Continuous side walls – without central stanchion – foldable with sideboard spring lifter, also swinging via manual central locking * Rear stanchions bolted * Combined steel double-wing rear doors, asymmetrically split, swiveling up to 270° and lockable, not foldable, fitted with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary bar fastener and central locking. Deactivation function for automatic tailgate opening when tipping backwards with door open * 4 mm steel floor plate * Two-step access on front left * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing eyes per side, recessed into the outer frame ----Loading Ramps: * Rear mounting compartment for loading ramps integrated into the chassis * 1 pair of aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, bulkhead, tipper platform, underrun protection, rear folding supports hot-dip galvanized * Side walls - KTL-coated - and tailgate painted in RAL 9010 pure white * Side walls can be painted in any RAL colour for an additional charge * Axles, air tanks, flange drawbar eye, front support winch painted black ----Information: * --Load securing certificate according to EN 12642 XL? * Errors and interim sale reserved * Sample images (actual vehicle photos may vary due to special equipment) ----Delivery time: * Available from week 15 / 2026

Durumu: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 700 mm, Üretim yılı: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders Ncsdpfsvin T Ssx Ag Nor * Drum brakes ----Suspension: * Air suspension with lift and lowering function, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Eye: * Drawbar with positive-locking height adjustment * 50 mm flange towing eye ----Electrical / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V mounted within the underrun protection ----General Fittings: * Support winch at the front * Externally mounted foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Steel 3-way tipper body made from high-tensile steel with high M-Strong side boards and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket bolted to the front wall * Continuous side walls (without centre stanchion), foldable with board spring lifters and oscillating via manual central lock * Rear stanchions bolted * Combination steel wing doors at the rear, 2-leaf asymmetrical split, can be swung open up to 270° and locked in place, not foldable, with additional pendulum frame for automatic tailgate opening during tipping, locking via galvanised rotary bar lock and central locking; deactivation feature for automatic tailgate opening when reverse tipping with wing door open * 4 mm steel floor * Two-step entry on front left * Mounting rail at rear for loading ramps ----Load Securing: * 1 x 7 t lashing point in each corner * 4 x 3 t lashing eyes recessed in the side outer frame on each side ----Loading Ramps: * Recessed mounting slot for loading ramps at the rear of the chassis * 1 pair of aluminium loading ramps (10 t per pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping body, underrun protection, and rear folding supports hot-dip galvanised * Side walls KTL-coated and tailgate painted RAL 9010 pure white * Side walls can be painted in any RAL colour for an additional charge * Axles, air reservoir, flange towing eye, and front support winch painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Errors and prior sale excepted * Sample images (vehicle images may vary due to special equipment) ----Delivery Time: * Available from CW 15 / 2026

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection Nedpfx Agjx Ipa No Necr * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front: closed plastic fenders; Rear: straight galvanized steel skirts, both with splash protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slant) * Widening planks stored at the center of the loading area * Excavator arm rest from rear axle to end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted laterally in the excavator arm rest) * Mechanical one-piece access ramps with spring assistance (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp positioning * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, towing bar, and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Dead weight 5,900 kg * --Technically possible gross vehicle weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Durumu: yeni, azami yük ağırlığı: 23.830 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 8.460 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, * T3 Profile 30.0: * EBS braking system Nodpfox Ipavox Ag Njcr * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization (rear) * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox on the bogie platform * Multi-voltage system * LED rear lights * Detachable rotating beacon (rear) * Towing bar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included) with integrated lashing points * Load securing package (La-Si Package) includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m overall width (not at the rear diagonal) * Widening planks stowed in the center of the loading area * Excavator arm trough over rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing eyes on each side in the excavator arm trough) * Mechanical single-piece access ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Load area above turntable: approx. 1,960 x 2,520 mm * Unladen load height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen load height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, bogie, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * Technically permissible gross weight of 30,000 kg * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Durumu: kullanılmış, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Üretim yılı: 2021, Donanım: ABS, Alman araç MASTERLINE Müller-Mitteltal KA-TA-R 11,9 Üç Yönlü Damperli, Altına Sürgülü Rampa ile İlk Tescil: 05/2021 Galvanizli Azami Yüklü Ağırlık: 11.900 kg Boş Ağırlık: 3.210 kg Taşıma Kapasitesi: 8.690 kg Lastik Ebatı: 235/75 R 17,5 Tandem dingil < 1 m Çekme kolu kademesiz yükseklik ayarlı, sıcak daldırma galvanizli, çekme halkası 40 mm Çerçeve galvanizli BPW akslar Taban yüksekliği: 0,93 m Ek hizmetler mümkündür! İhracat plakası (Kırmızı / 30 gün) Alman Kısa süreli plaka (Sarı / 5 gün) Alman Avusturya transfer plakası temini mümkündür Nedpjyxbgcofx Ag Nocr Araç teslimatı (ücretli) İnternette verilen bilgiler bağlayıcı olmayan tanımlamalardır. Garanti edilen özellikler değildir. Satıcı, hata, giriş hatası veya veri aktarım hatasından sorumlu değildir. Ara satış hakkı saklıdır. Sadece ticari alıcılara satış. Sadece genel satış koşullarımız geçerlidir.

Durumu: kullanılmış, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Üretim yılı: 2021, Donanım: ABS, Alman araç MASTERLINE Müller-Mitteltal KA-TA-R 11,9 Üç Yönlü Damperli, Altına Sürgülü Rampa ile İlk Tescil: 05/2021 Galvanizli Azami Yüklü Ağırlık: 11.900 kg Boş Ağırlık: 3.210 kg Taşıma Kapasitesi: 8.690 kg Lastik Ebatı: 235/75 R 17,5 Tandem dingil < 1 m Çekme kolu kademesiz yükseklik ayarlı, sıcak daldırma galvanizli, çekme halkası 40 mm Çerçeve galvanizli BPW akslar Taban yüksekliği: 0,93 m Ek hizmetler mümkündür! İhracat plakası (Kırmızı / 30 gün) Alman Kısa süreli plaka (Sarı / 5 gün) Alman Avusturya transfer plakası temini mümkündür Araç teslimatı (ücretli) İnternette verilen bilgiler bağlayıcı olmayan tanımlamalardır. Garanti edilen özellikler değildir. Satıcı, hata, giriş hatası veya veri aktarım hatasından sorumlu değildir. Ncedpfxsyw N Nps Ag Ner Ara satış hakkı saklıdır. Sadece ticari alıcılara satış. Sadece genel satış koşullarımız geçerlidir.

Durumu: kullanılmış, makine/araç numarası: GE11/142/2022, boş ağırlık: 6.350 kg, azami yük ağırlığı: 17.650 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2008, yükleme alanı uzunluğu: 8.500 mm, yükleme alanı genişliği: 2.500 mm, süspansiyon: hava, Çok iyi korunmuş, 1. elden araç Üç dingilli alçak şasi geçişli treyler Rampalı alçak şasi treyler Ağır yük taşımacılığı Tip: T3 Kompakt 30,0 Uzunluk: 8500 mm Genişlik: 2500 mm Hava süspansiyonu Ncodpfx Asn Aw Hkog Njr Ticari/İhracat net fiyatı - 15.990 € Değişiklik, ara satış ve hatalar saklıdır ===== Telefon2 Mobil =====

Durumu: yeni, azami yük ağırlığı: 11.050 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 30505 ---- * Remote diagnostics with display option in truck via EBS signal * Side marker lights with indicator control * Gross weight: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, folding, and removable, prepared for later retrofit of additional side panels * Lockable compartment under the tipping platform for loading ramps * Incl. 1 pair aluminum loading ramps 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN flush mounted and foldable in tipper floor (centered) * Hardwood excavator bucket rest * 2-step access in front of the front wall (hot-dip galvanized) * Continuously height-adjustable drawbar, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Net hooks, rear stanchions screwed on, hot-dip galvanized * Extension cables for the rear drop side * Plastic toolbox on right side of chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at rear of trailer ---- * Hire purchase price: * e.g. €549 for 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request our offer! * We are Müller-Mitteltal dealers * Free delivery possible for timely orders! ----Our business hours: Monday to Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours, appointments can be arranged. We speak German, English, Polish, and French. Nodjyvxg Iopfx Ag Nocr WhatsApp

Durumu: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with indication in the truck via EBS signal – without installation required on the truck side * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar adjustable in height by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the front right side of the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks in the central locking positions and two pieces on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with reinforced "Strong" drop sides (continuous side walls on top with internal pipe reinforcement – without center stanchions – foldable with drop side spring lift) * Rear stanchions bolted * Combination steel wing doors at the rear, 2-leaf asymmetrically split, can swivel and be locked at 270°, non-foldable, and with an additional pendulum frame for automatic rear door opening during tipping operation, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic rear door function when tipping rearwards with opened wing door * Each corner equipped with 1 x 5 t lashing point and each side with 4 x 3 t lashing rings recessed into the external frame * 4 mm plate floor made of fine-grain steel * Rear acceptance rail for the ramps * Body reinforced with cargo securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under the loading area in the chassis for the ramps Ncsdpfx Asx Hm Rcog Ner * Drawbar, underrun protection, rear stanchions, and rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black * Tires: 358/55 R 19.5 * Drop sides painted in RAL 9010 pure white * Side walls can be painted in any RAL color shade at extra cost * Subject to errors and prior sale * Available immediately from calendar week 10/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Two mechanical fold-down supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the right front side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at each central locking bearing and two at the front wall * Chassis made of fine-grained steel * 3-way tipper body made of steel with reinforced Strong sideboards (continuous side walls at the top with inside pipe reinforcement – without center stanchions – drop-down with sideboard spring lift) * Rear stanchions bolted * Combination steel double-wing tailgate, asymmetrically split – can be swung and locked up to 270° (not drop-down), plus additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate function when tipping in reverse with open wing door * Each corner fitted with 1 x 5 t lashing point; each side with 4 x 3 t lashing rings recessed into the outer frame * 4 mm floor plate made of high-tensile fine-grained steel * Rear mounting rail for drive-on ramps * Reinforced body with load securing certificate Nsdpfx Aex Hm Risg Nocr * 1 pair of aluminum drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t per pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps integrated below the loading platform in the chassis (accessible from rear) * Drawbar, underrun protection, rear stanchions, and rear fold-down supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade * Tires: 358/55 R 19.5 * Sideboard paintwork in RAL 9010 pure white * Side wall paintwork available in a custom RAL color for an additional charge * Errors and prior sale excepted * Available for immediate delivery from week 10/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector Njdpfsx Ipapox Ag Nscr * LED tail lights 12 / 24 V * Removable LED beacon (rear) ----General Attachments: * Support winch at the front * External hot-dip galvanized folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel, folding with tailgate spring lifter * Steel rear wall slidable between the ramps (holder for stowage when not in use located inside at the front bulkhead) * Detachable rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm-wide rubber cover strip on the inner side of the ramps * On the approach slope and externally on the low-loader platform (from bulkhead to end cross member), each with a 12 mm thick and 210 mm wide rubber cover strip ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t pull-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring each at the front and rear corners * Various 1.2 t lashing points in the bulkhead and end cross member through multiple boreholes ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 870 mm (can be compressed to 20 mm apart) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps are hot-dip galvanized * Axles, springs, air tank, and flange towing eye painted black * Side walls painted RAL 9010 pure white ----Information: * --Reinforced and certified body to EN 12642 XL, including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery Time: Vehicle available immediately

Durumu: yeni, azami yük ağırlığı: 10.500 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Drawbar height adjustable by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with indication option in the truck via EBS signal (no truck-side installation required) * 15-pin electrical connector * LED tail lights 12 / 24 V * Detachable LED beacon at rear ----General Attachments: * Landing gear at front * Outward-facing galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm at front right on front wall exterior * Side underrun protection * Plastic quarter mudguards ----Low-Loader Deck: * Provision in front of front wall for subsequent installation of container locks Nsdpfxox Ipbaj Ag Nscr * Bolted front wall made of smooth sheet steel * Trapezoidal profiled steel side walls, foldable with drop-side spring assists * Sliding steel rear wall between ramps – storage bracket for disuse inside front wall * Bolt-on rear stanchions * Rear drive-on gradient approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on inside of ramps * 12 mm thick and 210 mm wide rubber strips in the drive-on gradient and outer low-loader platform (from front wall to rear crossmember) ----Load Securing: * Perforated outer frame, angled approx. 45°, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating ramps with spring assist for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm clearance) ----Painting: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air reservoir, and flange drawbar eye painted in a black tone * Side panels painted in RAL 9010 pure white ----Notes: * --Reinforced and certified superstructure according to EN 12642 XL including load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Vehicle is available immediately ex Eggebostel

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: Nedpfxjq Dyvye Ag Necr * TPMS (Tire Pressure Monitoring System) * LED tail lights 12/24 V * 15-pin socket ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood flooring * Fitting for retrofitting container locks in front of the front wall * Bolted front wall made from smooth steel sheet * Side walls made from profiled sheet steel, foldable with drop-side spring assistance * Steel rear wall, insertable between ramp brackets, can be stowed in front of the front wall when not in use * Rear stakes bolted * Beveled rear drive-on angle approx. 860 mm ----Load Securing: * Perforated outer frame bent approx. 45 degrees, 2 t lashing eyes every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing eye at each front and rear corner * Various holes in front and rear cross-member for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed up to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Drop-side color in RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra charge ----Information: * -- Reinforced and certified bodywork to EN 12642 XL including load securing certificate -- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 10.900 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * RDÜ (Tire Pressure Monitoring System) * LED taillights 12/24 V * 15-pin electric connector ----General Attachments: * Jost landing gear at front * External hot-dip galvanized folding support legs at rear * Plastic toolbox, front right outside on front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed loading area: * 50 mm softwood floor * Preparation in front of bulkhead for later installation of container locks * Bolt-on smooth steel front wall * Side walls made of trapezoidal steel sheet, foldable, with drop side lifting device * Steel rear wall, insertable between ramp mounts; when not in use, stored inside in front of bulkhead * Bolt-on rear stanchions Njdpfx Aepk Dv Rog Nocr * Rear approach angle approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Provision for fitting 3 t lashing rings every 600 mm * In each corner at front and rear: 1 x 6.3 t lashing ring * Various drilled holes for 1.2 t lashing points in front and rear crossmembers ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (collapsible to 20 mm width) ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, rear wall, tailgate, and ramps * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color of your choice available at extra cost ----Info: * --Reinforced and certified body according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalizer assembly * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at front * Rear foldable external support legs * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights Nsdpfx Ael Th Hwjg Nocr * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolt-on flat steel bulkhead * Side walls made of trapezoidal-profile steel sheeting, fold-down with drop-side spring lift assist * Steel rear wall, slidable between the ramps, storage mount inside front bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Option to fit 3 t fold-down lashing rings every 600 mm * In each corner, front and rear, 1 x 10 t lashing ring, multiple holes in the bulkhead and end cross member for 1.2 t lashing points * Profifix lashing rail along the centre axis for lashing capacity up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism for single-man operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach wedge approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps and support legs hot-dip galvanized * Body side walls painted RAL 9010 pure white * Side walls can be painted in any RAL color for an additional charge * Axles, springs, air tanks, flange eye and landing gear painted in black * New vehicle with full manufacturer warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 14.660 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 19.0: * Wabco EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs – 110 mm wide – with tandem equalizing unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear Nodpfx Asl Th Hleg Necr * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Fixture in front of bulkhead for retrofitting container locks * Bolted flat plate bulkhead * Trapezoidal-profiled steel side panels, foldable with drop side spring assist * Steel rear wall, retractable between the ramps – bracket for storage in the front bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * In each front and rear corner 1 x 10 t lashing ring, various holes for 1.2 t lashing options in front and rear crossmembers * Profifix lashing rail along center axis for securing up to LC 3000 daN * One-piece mechanical grating ramps with spring mechanism suitable for single-person operation, approx. 2,750 x 620 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, loading ramps, and folding supports hot-dip galvanized * Side panel painting in RAL 9010 pure white * Painting in other RAL shades available on request for additional charge * Axles, springs, air tank, flange towing eye, and landing gear painted black * New vehicle with full manufacturer’s warranty * Errors and prior sale excepted * Available approx. from calendar week 21/2026 * Sample images

Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps Reference Number: 11612 * NEW VEHICLE, not yet registered, now available in RAL 9016 traffic white * Door-to-door delivery available for an additional charge! * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side boards can swing, fold down, and be removed; prepped for later retrofit side board extensions * Front wall hot-dip galvanized * Lockable compartment under the tipping platform for loading ramp * Includes loading ramps 3.31m, 8t per pair * 4 UVV lashing rings LC 5000 daN at front and rear * 8 recessed, folding lashing eyes LC 3000 daN mounted in the tipper floor (centered) * Net hooks * Drawbar continuously height-adjustable, hot-dip galvanized, towing eye 40mm * Galvanized chassis * Tires: 235/75R 17.5 (x4), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 Volt * Side marker lights with indicator activation * Bolted, galvanized rear stanchions * Excavator bucket holder mounted on the front wall --- Please request an individual quote from us! Additional equipment options available. Financing from just €405 net for 72 months with no down payment and no final residual value. An offer from our financing partner "FM LeasingPartner" --- Ncsdpeyl Ebpefx Ag Njr Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged. WhatsApp Leasing, financing, and trade-ins possible---

Durumu: kullanılmış, boş ağırlık: 2.910 kg, azami yük ağırlığı: 7.590 kg, toplam ağırlık: 10.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2009, bir sonraki muayene (TÜV): 04/2025, yükleme alanı uzunluğu: 4.500 mm, yükleme alanı genişliği: 2.200 mm, yükleme alanı yüksekliği: 450 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: mavi, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, side underrun protection, front support, rear support, swinging tailgates Njdpfov S H Sfjx Ag Nscr Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost of €900.00 net! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Durumu: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes Njdpfx Ajpk D Dqsg Njcr ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with indicator function in the truck via EBS signal, no truck-side installation required) * LED lighting system * 15-pin electrical connector ----General attachments: * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Prepared for retrofitting of 20" container locks at front and rear * Bolted smooth steel bulkhead * Side walls made from trapezoidal-profiled steel, foldable, equipped with drop-side spring assistance * Screwed, hot-dip galvanized rear stanchions ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t per pair), suitable for rubber-tired and tracked vehicles, stowed at the rear in a compartment integrated under the loading area in the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Durumu: yeni, azami yük ağırlığı: 10.360 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flanged Towing Eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display capability in the truck via EBS signal, no in-truck installation required) * LED lighting system * 15-pin electrical connector Ncsdpjndpn Ssfx Ag Nsr ----General Attachments: * Jost landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provisions for subsequent installation of 20" container locks at the front and rear * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profiled steel sheet, foldable with drop side spring assist * Bolted hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles, stowage compartment at the rear housed under the load platform in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front and rear walls * Vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Durumu: yeni, azami yük ağırlığı: 8.750 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, Donanım: ABS, hidrolik arka platform, Inquiry number: 11599 * NEW VEHICLE now immediately available in stock at Alsdorf * Versatile use: construction, landscaping, agriculture and forestry – can be used as tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * Tyres: 385/55 R19.5, (4 units), BPW axles, parabolic springs, drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload 8,750 kg. * EBS multi-voltage system for towing vehicles with 12 and 24 volt electrics (e.g., agricultural and forestry vehicles) Nsdoyhtwwepfx Ag Nocr * Side marking lights with integrated turn signal function * LED lighting system for 12+24 volts, with 1x 15-pin connection cable and an additional connection cable as standard, configuration 12 volt 13-pin with empty sockets for both electrical connectors * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded sidewalls, swinging, folding and removable, pre-fitted for later installation of sidewall extensions * Lockable compartment under the tipping body for loading ramps * Includes aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment beneath the tipper body * Front wall hot-dip galvanised * 4 UVV tie-down rings LC 5000daN front and rear + 8 recessed, folding tie-down lugs LC 3000daN in the tipper floor (centred) * Continuously height-adjustable tow bar, hot-dip galvanised, towing eye 40mm * Net hooks * Bolted, galvanised rear stanchions * ---- * We are a Müller-Mitteltal distributor! Request a quote from us! * Example: €519 net per month for 60 months, no down payment, no residual value. An offer from our finance partner FM LeasingPartner ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Available outside business hours by appointment We speak German, we speak English, mowimy po polsku, on parle francais, WhatsApp Leasing, financing, trade-in possible----

Durumu: kullanılmış, azami yük ağırlığı: 22.000 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 11/2008, Donanım: ABS, Vehicle Identification Number: WMM0000080052540 STRAIGHT LOAD BED Container Locking System Unladen Weight: 8,000 kg Ncodpfx Aotuhv Rsg Ner German Inspection (HU): Due Gigant Axles with Drum Brakes Air Suspension Platform Dimensions: 9,400 mm – Loading Height: 880 mm – Dimensions, see image no. 4 Extendable to 3,000 mm with Lighting Drawbar – 50 mm Hydraulic Ramps, Split – Length 2,600 + 1,600 mm – Width 650 mm Support System Tyres: 235/75 R 17.5 Subject to change, prior sale and errors excepted. The description serves for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The decisive basis is the description as per the purchase contract. Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be adhesive-labelled and/or marked with advertising. Our general terms and conditions of delivery and payment apply.

Durumu: yeni, azami yük ağırlığı: 10.970 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, KA-TA-R 14,4 - Kamyon Tandem Üç Yana Devirmeli Dorse - Seride taşıma kapasitesi yakl.: 11.050 kg - 285/70R19.5 lastik ile toplam ağırlık 14,4 tona yükseltilebilir - İç ölçüler: 5.000 x 2.420 x 500 mm - Yüklü zemin yüksekliği 1.040 mm - 1 adet sıcak daldırma galvanizli şasili ve alt korumalı gövde - Boya: Akslar, yaylar ve hava tankı vb. siyah renkte - Çelik zeminde gömülü ve katlanabilir 3 çift yük sabitleme halkası, LC 3.000 daN - ABS 2 S/2 M, 24 Volt - 500 mm yüksekliğinde çelik yan kapaklar için 2 yay kaldırıcı - Sol ve sağda, bölünmemiş yan duvarlarda salınımlı 1 merkezi kilit Opsiyonel donanımlar: Çelik zemine gömülü 1 çift UVV sabitleme halkası, zeminin üstünde değil 4 mm kalınlığında Hardox 450 çelik taban Standart yerine kranklı dişli ile çekme kolu yükseklik ayarı 1 çift kenarsız alüminyum yükleme rampası (8,0 t/çift), 3.500 x 400 x 105 mm, lastikli ve paletli araçlar için uygun Njdpfx Agoxmwiyj Njcr Alet kutusu