Kullanılmış Müller-Mitteltal 3-Achs Plateu Anhänger, Mit 3 Kabelböcken satın al (42.739)

Koşul: yeni, azami yük ağırlığı: 31.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, Donanım: ABS, T 4 Profi 40.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height setting ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * SmartBoard as infotool with pressure sensors for axle load indication per axle group * 15-pin electrical connector * LED rear lights * LED beacon (removable) at the rear Godsylfvgjpfx Akujub ----General attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, mounted right side * Front closed plastic single mudguards * Rear straight steel mud aprons each with spray protection (spray mist suppression) * Side underrun protection ----Low-loader platform: * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers, lockable * Floor on turntable platform made of 50 mm and on low-loading platform of 60 mm softwood * 20 mm rubber overlay instead of wooden floor in trackway area, with a low-bed length of 6,780 mm including approach ramp * Rubber overlay on the approach ramp left and right, approx. 860 mm long * Each side with 4 pocket stakes (no stakes included) with simultaneous 2-ton lashing capacity each ----Chassis: * Chassis made of high-strength fine grain steel ----Load securing (Lasi package): Turntable platform: * 2 pairs of 13.4 ton lashing eyes in the outer frame of the turntable platform Low-bed: * Each side with 4 pairs of 10 ton drop-down lashing rings on the outer frame, loadable in all directions * Rear sides each with 2 pairs of 13.4 ton swing-out lashing rings ----Ramps: * Rubber overlay on folding loading ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift & load holding valves ----Rear support: * Hydraulic rear support ----Wideners: * 8 pairs of galvanized folding outriggers for 3 meters overall width (not included on the rear slope) * Widening planks stored in a compartment left side ----Digger stick recess: * Digger stick recess over the rear axle up to the end of approach ramp, approx. L=2,100 mm x W=740 x H=190 mm * 2 pairs of 6.4 ton lashing rings in the digger stick recess on each side ----Hydraulics: * Hydraulic flow divider in the trailer (with truck hydraulic pump output over 40 – max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm approach ramp) * Loading area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape, sides and rear * Chassis, turntable, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include special equipment ----Delivery time: * Vehicle is expected to be available from week 23/2026

Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2-in-1 = for roll-off containers and as a low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles ----Suspension: * Air suspension with lifting and lowering system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin electrical connector ----General attachments: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container nets made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray suppression * Plastic rear bumper buffer * Folding A-sign at rear ----Loading platform: * Main frame with raised outer rails for guiding roll-off containers * Steel floor plate with recesses for rollers in the bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-way clamp locking and mechanical removable stop wedges at the front of the running track, cargo securing certificate according to DIN 30722-1 * Weld bead as anti-slip surface in the inclined running track area * Mechanical drop-down rear supports ----Load securing: Gujdpfx Akel Tq Nmeujb * 1 pair 10 t UVV lashing rings at the front bulkhead support * 3 pairs 10 t UVV lashing rings at the lateral outer frame * On each side, 4 x 2 t lashing eyes in cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 t / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessed from rear) ----Paintwork: * Chassis, bogie, locking parts, and rear drop-down supports hot-dip galvanized * But the drawbar, axles, and air tanks painted in a black tone ----Information: * New vehicle, never registered, with full manufacturer's warranty * Subject to errors and prior sale * Reference images ----Delivery time: * Available approx. from CW 43 / 2026

Koşul: yeni, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, Üretim yılı: 2026, * TRA 18.0: * 2-in-1: For hook lift containers and as a low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lifting/lowering system and RTR valve ----Drawbar: * Drawbar, 2,000 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tyre pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * LED rear lights, 12 / 24 V * 15-pin power plug Gsdpol Tpc Ajfx Akujub ----General Attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Folding A-board at the rear ----Loading Platform: * Main frame with raised outer frame for guiding roll-off containers * Steel floor plate with roller recesses in the bogie area * Container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-way clamp locking as well as mechanically insertable bracket stops front in the running area, load securing certificate according to DIN 30722-1 * Weld seam as non-slip coating in the ramp area * Mechanical falling supports at rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs of 10 t UVV lashing rings on the sides in the outer frame * 4 x 2 t cloverleaf-type lashing eyes per side * 4 x 8 t lashing brackets set into the outer frame ----Ramps: * 1 pair of aluminium loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, and rear supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black tone ----Information: * New vehicle, never registered, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 43 / 2026

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * Drum brakes * 2 x 7 t Gigant axles Godex Hm Rcspfx Akusub * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (~300 mm) with 40 mm flanged towing eye * Jost manual landing gear at the front * Two manual folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on underrun protection * Plastic quarter mudguards * Tie-down hooks at the positions of the central locking as well as 2 pieces at the front wall * Chassis made of fine-grained steel * Steel pallet-style three-way tipper body with reinforced Strong side panels (continuous side walls at the top with internal tube reinforcement – without mid-stakes – foldable with panel spring lifter) * Rear stakes bolted * Combination steel double-wing rear doors, asymmetrically split – can be swung and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation, locking by zinc-coated rotary bolt closure at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with open wing door * Each corner equipped with one 5 t lashing point, each side with four 3 t lashing rings recessed in the outer frame * 4 mm floor plate made of fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load bearing capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment recessed under the loading platform at the rear in the chassis for ramps * Drawbar, underrun protection, rear stakes and rear folding supports hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Tyres: 358/55 R 19.5 * Side panels painted to customer’s RAL color specification (except special or metallic paint) – may be changed up to approx. 6 weeks before completion * Errors and prior sale excepted * Available from week 29/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 10.660 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 600 mm, Üretim yılı: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal - no truck-side installation required - * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem balancing unit * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED tail lights 12/24 V * Bolt-on underrun protection * Plastic quarter fenders * Net hooks at each lock location and 2 at the front wall * Chassis made of fine-grain steel * Steel pallet - three-way tipper body with reinforced strong side boards (continuous upper side walls with internal pipe reinforcement - without intermediate stanchions - foldable with board spring lifter * Screw-on rear stanchions * Combination steel swing door rear wall, 2-leaf, asymmetrically split, can be swung and locked up to 270° - not foldable - with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate function when tipping backwards with doors open * In each corner, 1 x 5 t lashing point and each side, 4 x 3 t lashing rings recessed in the outer frame * 4 mm fine-grain steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed into the chassis below the loading area for ramp storage * Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in a black shade Godex Hm Riepfx Akusub * Tires: 358/55 R 19.5 * Side walls painted in customer-chosen RAL color (no special or metallic paints) – color can be changed up to approx. 6 weeks prior to completion * Subject to errors and prior sale * Available immediately from KW 29/2026 * Sample images

Koşul: yeni, azami yük ağırlığı: 6.900 kg, toplam ağırlık: 9.900 kg, dingil konfigürasyonu: 1 dingil, Üretim yılı: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Support windlass at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and crossbeams * Closed fenders made of sheet steel with splash guards * Closed side underrun protection can be used as an advertising area * Plastic toolbox with base inlay (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum frame, clear width between the drum arms 1,700 mm with tension latch for drum securing at the support arm ends and a central claw lock securing the drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide * Hydraulic lines supply and return * Chassis and hydraulic preparation for retrofit of a separate engine * 315/80 R 22.5 tires * Unladen weight: 2,690 kg Gusdpfx Aoxyniwjkuob * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and intermediate sale excepted * Immediately available ex Egestorf

Koşul: iyi (kullanılmış), dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, izin verilen aks yükü (aks 3): 10.000 kg, ilk tescil: 11/2015, toplam uzunluk: 14.000 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.050 mm, süspansiyon: hava, lastik boyutu: 235/75 17.5, dingil mesafesi: 1.300 mm, Üretim yılı: 2015, Donanım: ABS, = Further Options and Accessories = - EBS - Rear air suspension = Remarks = - Müller Mitteltal 3-axle low-loader - 3 × 10,000 kg axles - Fifth-wheel load: 11,000 kg - Load platform dimensions: length 930 cm × width 252 cm - Loading height: 98 cm - Covered neck dimensions: length 500 cm × width 264 cm - Neck loading height: 144 cm - Sliding tarp left and right - Dimensions of the hydraulic loading ramp: - Section 1: 270 × 235 cm - Section 2: 180 × 235 cm - Lashing points - 2 storage boxes Well-maintained and robust low-loader, ideally suited for transporting, among other things, machinery, forklifts, and access platforms! = Further Information = Axle configuration Tyre size: 235/75 17.5 Suspension: Air suspension Rear axle 1: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50% Rear axle 2: twin tyres; max. axle load: 10,000 kg; tyre tread left inner: 50%; tyre tread left outer: 50%; tyre tread right inner: 50%; tyre tread right outer: 50% Rear axle 3: twin tyres; max. axle load: 10,000 kg; steered; tyre tread left inner: 30%; tyre tread left outer: 30%; tyre tread right inner: 30%; tyre tread right outer: 30% Weights Curb weight: 10,700 kg Payload: 25,300 kg Gross vehicle weight: 36,000 kg Condition Technical condition: good Cosmetic condition: good Godsy I Axxspfx Akusub Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Koşul: ikinci el, dingil konfigürasyonu: 3 dingil, süspansiyon: parabolik yaprak (yay), lastik boyutu: 235-75R17.5, Üretim yılı: 2010, 3 dingilli alçak şasi römork, arkadan yüklenebilir. Azami toplam ağırlık 30.000 kg, taşıma kapasitesi 22.700 kg. Yükleme alanı 8.900 mm (7.000 + 1.900) x 2.550 mm, aşırı genişlik için ikaz paketi, 12 yük bağlama halkası ile 8 dikme cebi, aynı zamanda bağlama imkanı, 6 adet alet kutusu. İki parçalı hidrolik rampalar yaklaşık 2.100+2.000 x 800 mm ve kauçuk kaplamalı, hidrolik arka destek. BPW akslar, EBS, dengeleme ünitesine sahip parabolik süspansiyon, lastik ölçüsü 235-75 R 17.5. Kavisli çekme kolu, döner çekme gözü 40+50 mm. 2 hatlı hava (Duomatik), 2 hatlı hidrolik, 24 volt. Boşken yükseklik yaklaşık 910 mm. Turuncu boyalı. Muayenesi 03-2027'ye kadar geçerli. = Ek Bilgiler = Guodpfey Evvlsx Akuob Lastik ölçüsü: 235-75R17.5 Süspansiyon: Parabolik süspansiyon Boş ağırlık: 7.300 kg Yük kapasitesi: 22.700 kg Azami toplam ağırlık: 30.000 kg Üretim ülkesi: DE Daha fazla bilgi için Jan-Marc Schwickert ile iletişime geçin.

Koşul: ikinci el, azami yük ağırlığı: 7.100 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2007, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.100 mm, toplam genişlik: 2.550 mm, Araç / Üst yapı: Tandem üç taraflı damper İlk tescil: 07/07 Toplam ağırlık: 10.000 kg Guedeyz H Azopfx Akujb Boş ağırlık: 2.900 kg Taşıma kapasitesi: 7.100 kg Toplam uzunluk: 6.900 mm Yükleme uzunluğu: 5.000 mm Genişlik: 2.550 mm / yaklaşık yükleme genişliği 2.450 mm Yükleme yüksekliği: yaklaşık 1.100 mm Diğer bilgiler - 40 km/s - 500 mm yan paneller - 500 mm galvanizli ön ek - Yük yüzeyinde 7 çift sabitleme halkası - Üst yapı dışında 4 çift sabitleme halkası - Destek ayağı - Arka destek - Yan panel kaldırma yayı - Opsiyonel rampalar 1.280,00 €

Koşul: yeni, Üretim yılı: 2026, New model, now with 9,900 kg gross vehicle weight! Cable drum transport trailer. Permissible gross weight: 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol, 8.1 kW, electric start) with weather protection cover, hydraulically driven drum with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centring cones for cable drums. Dual-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tyre pressure monitoring. Height-adjustable 40 mm towing eye, 2-line air, LED lighting 12+24 V. Toolbox, advertising panels integrated into the side underrun protection. Fully hot-dip galvanized vehicle. New vehicle including factory warranty. Available from approx. week 26, 2026. (Archive photos) = Further information = Gujdpjyyhb Njfx Akueb Unladen weight: 2,900 kg Payload: 7,000 kg Gross vehicle weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (Electronic Braking System) * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm with axle lifted) * Last axle with trailing steering (lockable from cab for shunting without truck-side installation, additionally lockable via switch on the trailer). Lock must be deactivated before entering public roads. * Forced relief as well as forced lowering of lift axle for manoeuvring purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display function in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon at rear ----General Attachments: * Mechanical warning sign kit for 3 m overall width * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, on left side * Plastic fenders at front axle, galvanized sheet steel fender skirts at rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortening of the low-loader platform by 500 mm to 6,280 mm including extended offset bending by 500 mm to the front * Rubber coating on folding frame, approach slope, and running surface of low loader platform * Bamboo timber between longitudinal beams in front of excavator stick rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings in the front corners * 2 x 13.4 t UVV lashing points front and rear on each side * 5 x 10 t UVV lashing rings on each side (pivoting, lowerable, and loadable from all directions) * 4 stake pockets per side, each with 2 t lashing option * 1 x 16 t UVV lashing point at rear cross member ----Widening: * Extendable and foldable widening arms for 3 m overall width (plank holder under the chassis on front right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to rear cross member, approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side in the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable pointed section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: Guodpsxptn Dsfx Akusb * Hydraulic flow divider (for hydraulic pump performance in truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Deck Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, turntable, drawbar, widening consoles, access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: Available immediately*

Koşul: yeni, azami yük ağırlığı: 38.620 kg, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, Üretim yılı: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles Gsdpfx Asl Tihujkueub * 3rd axle liftable (ride height increases by +30 mm when lifted) * Last axle steered (axle steering lock for maneuvering can be engaged from the driver’s cab without truck-side installation or additionally via a switch on trailer). The lock must be disengaged before entering public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (requires truck-side installation), with speed-dependent activation via EBS control ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring system, displayable in truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * Removable LED beacon at the rear ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Front plastic mudguards and rear galvanized steel mudflaps ----Low Loader Deck: * Gooseneck turntable platform with 45° corners and 3 storage compartments with lockable folding lids (rear-opening) * Shortened lowbed platform by 500 mm to 6,280 mm including extended stepped contour, 500 mm forward * Rubber lining on folding frame, drive-on slope and load-bearing surface on the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick recess ----Load Securing (LaSi package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV lashing points per side (front & rear corners) * 5 x 10 t UVV lashing rings per side (pivoting, retractable, loadable in all directions) * 4 stake pockets per side, also providing 2 t lashing capability each * 1 x 16 t UVV lashing point on the rear traverse ----Widening: * Extendable and foldable extension arms for up to 3 m total width (deck board holder under the chassis, right side) ----Excavator Stick Recess: * Fully continuous, reinforced profile from last axle to rear cross member. Approx. L=2,350 x W=770 x D=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Load area above turntable: 2,600 + 390 x 2,520 mm * Lowbed area: 6,280 + 500 x 2,520 mm, incl. 860 mm drive-on slope ----Paintwork: * Chassis, turntable, drawbar, extension consoles, and loading ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Notes: * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: Immediately available*

Koşul: ikinci el, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 8.650 mm, yükleme alanı genişliği: 2.480 mm, ? Mekanik rampalar ? Yükleme yüksekliği: yaklaşık 910 mm ? Stepne tutucu ? 40 mm çekme halkası ? Dönerek yanıp sönen uyarı lambası ? Kampana frenler ? Yaprak yaylar ? 1 x saklama kutusu ? Çift lastik ? SAF akslar Guodpfx Akjyw Egweuob Tüm bilgiler taahhütsüzdür / Ara satış hakkı saklıdır.

Koşul: ikinci el, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Üretim yılı: 2021, Donanım: ABS, Alman araç Gusdeyxbgcopfx Akueb MASTERLINE Müller-Mitteltal KA-TA-R 11,9 Üç Yönlü Damperli, Altına Sürgülü Rampa ile İlk Tescil: 05/2021 Galvanizli Azami Yüklü Ağırlık: 11.900 kg Boş Ağırlık: 3.210 kg Taşıma Kapasitesi: 8.690 kg Lastik Ebatı: 235/75 R 17,5 Tandem dingil < 1 m Çekme kolu kademesiz yükseklik ayarlı, sıcak daldırma galvanizli, çekme halkası 40 mm Çerçeve galvanizli BPW akslar Taban yüksekliği: 0,93 m Ek hizmetler mümkündür! İhracat plakası (Kırmızı / 30 gün) Alman Kısa süreli plaka (Sarı / 5 gün) Alman Avusturya transfer plakası temini mümkündür Araç teslimatı (ücretli) İnternette verilen bilgiler bağlayıcı olmayan tanımlamalardır. Garanti edilen özellikler değildir. Satıcı, hata, giriş hatası veya veri aktarım hatasından sorumlu değildir. Ara satış hakkı saklıdır. Sadece ticari alıcılara satış. Sadece genel satış koşullarımız geçerlidir.

Koşul: ikinci el, boş ağırlık: 3.210 kg, azami yük ağırlığı: 8.690 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2021, bir sonraki muayene (TÜV): 06/2026, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.430 mm, yükleme alanı yüksekliği: 500 mm, süspansiyon: çelik, lastik boyutu: 235/75 R17.5, Üretim yılı: 2021, Donanım: ABS, Alman araç MASTERLINE Müller-Mitteltal KA-TA-R 11,9 Üç Yönlü Damperli, Altına Sürgülü Rampa ile İlk Tescil: 05/2021 Galvanizli Azami Yüklü Ağırlık: 11.900 kg Boş Ağırlık: 3.210 kg Taşıma Kapasitesi: 8.690 kg Lastik Ebatı: 235/75 R 17,5 Tandem dingil < 1 m Çekme kolu kademesiz yükseklik ayarlı, sıcak daldırma galvanizli, çekme halkası 40 mm Çerçeve galvanizli BPW akslar Taban yüksekliği: 0,93 m Ek hizmetler mümkündür! İhracat plakası (Kırmızı / 30 gün) Alman Kısa süreli plaka (Sarı / 5 gün) Alman Avusturya transfer plakası temini mümkündür Araç teslimatı (ücretli) İnternette verilen bilgiler bağlayıcı olmayan tanımlamalardır. Garanti edilen özellikler değildir. Satıcı, hata, giriş hatası veya veri aktarım hatasından sorumlu değildir. Guodeyw N Npopfx Akuob Ara satış hakkı saklıdır. Sadece ticari alıcılara satış. Sadece genel satış koşullarımız geçerlidir.

Koşul: ikinci el, azami yük ağırlığı: 13.640 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 1.000 mm, toplam genişlik: 2.500 mm, - Yeni HU (Muayene) - Toplam ağırlık: 18.000kg / 20.000kg - Boş ağırlık: 4.360kg - Taşıma kapasitesi: 13.640kg / 15.640kg Diğer bilgiler - Çift lastikli 235/75R17,5 - Gigant akslar - 4 çift yük sabitleme halkası - PNömatik kilitleme sistemi - Alçaltılabilir döner şasi Guedeyw Ep Sjpfx Akuob - Yaklaşık 2.300mm'lik rampa, saklama bölmesinde - Arka destek ayağı - Ekipman dolabı - Alt koruma

Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WMM000000L0066323, boş ağırlık: 2.980 kg, azami yük ağırlığı: 7.020 kg, toplam ağırlık: 10.000 kg, dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, yükleme alanı uzunluğu: 5.350 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 800 mm, toplam uzunluk: 7.498 mm, toplam genişlik: 2.550 mm, lastik durumu: 95 yüzde, renk: beyaz, römork freni: frenli römork, Üretim yılı: 2021, Donanım: ABS, Yeni durumunda römork Garanti ve sorumluluk olmaksızın satış Gujdpfx Asyt Igkokusb Hatalar ve ara satış hakkı saklıdır! Bu ilandaki bilgiler bağlayıcı olmayan tanımlamalardır ve taahhüt edilmiş özellikler olarak kabul edilmez. Satıcı, yazım hataları ve veri aktarımındaki eksikliklerden sorumluluk kabul etmez. Belirtilen donanımlar ayrıca kontrol edilmelidir. İlanlardaki tüm bilgiler bağlayıcı değildir!

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Braking System: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3-m warning board sets, front and rear * Support winch at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each left & right side Godpjv D Tbkjfx Akueub * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m external container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) at an overall external width of 3,000 mm ----Load Securing: * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option for installing 3 t recessed lashing rings every 600 mm – 5 x 3 t UVV lashing rings installed on each side * In the front and rear corners, 1 x 6.3 t lashing eye each (in front directly behind the container locks in the wooden floor and at the rear in the end beam) * Various drillings in the front and rear beams for 1.2 t lashing points ----Ramps: * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired and tracked vehicles * Rear accessible storage compartment recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, front support winch, and flange drawbar eye painted black ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 22/2026

Koşul: yeni, azami yük ağırlığı: 10.950 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2026, * ETÜ-TA-ER 14.4 Flatbed Trailer: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting B-dimension approx. 8,080 mm) * 40 mm flange drawbar eye ----Electrical / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Landing gear at the front * Outward-folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted on left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable; locking measure retracted according to ISO-DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this is not a DIN standard) at a total external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for fitting 3 t recessed lashing rings every 600 mm — mounted 5 x 3 t UVV-certified lashing rings per side * In the front and rear corners, 1 x 6.3 t lashing ring each (front, directly behind the container locks in the timber floor, rear in the end beam) * Multiple holes in front and rear end beams for 1.2 t lashing options ----Ramps: * 1 pair aluminum slide-in ramps approx. 3,570 x 410 mm (10 t/pair load capacity), suitable for rubber-tyred and tracked vehicles * Rear-accessed storage compartment under the loading area, integrated into the chassis Godpfx Asv D Tbdjkuoub ----Paintwork: * Chassis, drawbar, front wall, underrun protection as well as rear supports galvanized * Axles, air tanks, front landing gear, and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 22/2026

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: Gujdpfxsykx I Hj Akusb * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: yeni, azami yük ağırlığı: 29.850 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, Üretim yılı: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes Guodpfx Asykx I Tokujb ----Axles: * 2 x 10 t axles * Rearmost axle configured as trailing steering axle, with electro-pneumatic steering lock activated by reverse gear PIN * Additional lock for the trailing axle, operated from the tractor unit for maneuvering purposes – installation on the truck side is not required – assigned to PIN 10. The lock must be disengaged before driving on public roads. ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride-through-Reset) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as information tool with pressure sensors for total axle load indication only * 7-pin socket at the rear for extra-length lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connecting lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Bed: * 50 mm floor made of larch / Douglas fir instead of spruce / fir * Rear incline – 700 mm long – from the fifth wheel platform to the low bed with chequer plate surface, plus a perforated strip at the end for attaching aluminum loading ramps * Chequer plate cover over the wheels * SP-Combo Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the fifth wheel platform, approx. 2,480 x 500 mm * Folding top lid and side doors in the angled corners * Foldable aluminum side walls 500 mm high on the fifth wheel platform, including folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Prepared for container lock fittings * Prepared for 3 receiving recesses in the entry incline from the low bed to the gooseneck * Prepared for retrofitting folding supports for 3 m extension by welding the mounting brackets into the outer frame ----Load Securing: Fifth-wheel platform: * Front corners and front with 50 mm bores, each for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed into the floor on the sides towards the entry incline * Perforated outer frame, 45° angled, with hole pattern for lashing equipment (2 t lashing points every 480 mm) * 2 x 6.3 t retractable lashing rings on each side integrated into the outer frame Low bed platform: * 2 x 16.5 t lashing rings centered directly in front of the incline to the gooseneck * 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings per side, integrated into the outer frame * 4 stanchion pockets per side integrated into the outer frame * Profifix lashing rail placed centrally along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last fixed axle to the rear crossmember: W = 770 mm, D = 270 mm (2 x 6.4 t lashing rings per side, rigidly welded in the excavator arm rest) ----Ramp: * Hydraulic single-piece "ALLTEC" aluminum access ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp adjustment on guide tube of the ramp

Koşul: ikinci el, boş ağırlık: 6.500 kg, azami yük ağırlığı: 23.500 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 01/2008, bir sonraki muayene (TÜV): 03/2024, yükleme alanı uzunluğu: 8.000 mm, yükleme alanı genişliği: 2.520 mm, yükleme alanı yüksekliği: 910 mm, süspansiyon: çelik, lastik boyutu: 235/75R17.5, renk: turuncu, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, twin tires, storage box. Guodpfxoqpgtms Akujb Body: Hydraulic ramps, extendable to 3 m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Koşul: yeni, azami yük ağırlığı: 14.550 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes * Automatic braking when opening the cross clamping units * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brakes) * Tire pressure monitoring with in-cab display via EBS signal – no vehicle-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right-hand side * Storage box for container net, made of galvanized perforated sheet, 1,000 x 500 x 500 mm, mounted on the side * Enclosed plastic mudguards, front and rear axles * Closed side underrun protection (RAL 9010 pure white) suitable as advertising surface * Rear underrun protection * Rear plastic impact protection buffers * Foldable A-board * Hazardous goods sign with document pouch and reflective rear parking warning panel Gujdpfxol Tn U Re Akujb * 15-pin electrical connector * LED lighting system with protective cover * 2 LED reversing lights (operated via reverse gear) * Additional front loading with lowered rear track and removable stop * Roller recesses at the turntable area with mechanically adjustable angle stops (2 positions), front left and right on the tracks * Track length approx. 6,830 mm * Pneumatic 4-point clamp locking system * For the transport of external roll containers according to DIN 30722 Part 1 – Dekra cargo securing certificate available * Loaded platform height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black finish * --Permissible gross weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Koşul: ikinci el, ilk tescil: 11/2006, Üretim yılı: 2006, MÜLLER - MITTELTAL T4 Kompakt Döner Tabla - Alçak Şasi Dorsesi, havalı süspansiyon ve teker çukuru ile - 4 x havalı süspansiyonlu GIGANT aks - havalı süspansiyonlu - 4 x teker çukuru Gujdpfx Akjwmpbdeuob - mekanik rampa - arkada 2 destek, katlanabilir - uzatılabilir uyarı levhaları - ABS - MICHELIN lastikler: 235/75 R 17.5 - ağır model: 40.000 kg azami yüklü ağırlık - boş ağırlık: 8.400 kg - toplam uzunluk: 11.750 mm - 50 mm çeki halkası Özellikle kalk freze makineleri taşımak için uygundur! - Alman römorku - Muayene / teknik kontrol istek üzerine ve ek ücretle mümkün! Hata ve ön satış hakkı saklıdır!

Koşul: yeni, azami yük ağırlığı: 31.630 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 9.250 mm, yükleme alanı genişliği: 2.520 mm, * T 4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display function in the truck via EBS signal – without truck-side installation * Warning sign packages front & rear * Contour marking tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additionally 12 V – 7+4 pin power cable * Extended connector lines for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Closed single mudguard at the front (plastic) Guedpfx Akorczm Deuob * Straight steel mud flaps at the rear, each with spray suppression * Side underrun protection * Extended offset cranking by 500 mm forwards * Bogie platform extension at the front by 520 mm with 45° corners, 3 integrated compartments incl. lids and lockable * Chassis made of high-strength fine-grained steel * Floor above the bogie platform made of 50 mm, and in low-bed platform made of 60 mm softwood * Outer planks of loading ramps made of 50 mm bamboo wood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing possibility * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, front and rear pairs of 13.4 t lashing rings on outer frame, 4 pairs per side of 10 t lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame, 2 pairs of 6.4 t lashing rings on the side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Widening planks stored sideways left in storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area above slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, bogie, loading ramps, and rear mechanical drop legs hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from week 21 / 2026