Kullanılmış Humer Htt14000 620X246X40 17,5" satın al (116)

Koşul: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Welded steel construction Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame Foldable rear support Wheel chocks with holders Aluminium side underrun protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray mudflaps behind each axle 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) Extendable deck widenings to 3,000 mm (not in rear chamfer) (the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm Lashing Points Low-loader 3 pairs of 10 t lashing points integrated in the floor at the front 6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame 1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm 1 x rear chamfer Kledei Ri N Hspfx Afqst 5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets) Trailer Drawbar Assembly - Turntable trailer Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white/red lane marker lights at the rear 2 white position lights at the front 1 revolving beacon with holder, switchable via parking light (beacon removable) 2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm 2 x 7-pin interchange-proof plugs at the front, with connecting cable Deck Front section with steel floor, then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering Rear chamfer with 70 mm softwood floor Low-loading area incl. rear chamfer 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment) Wood covering Assisted by spring lifters Operating Notes Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility. The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions. Registration / Plates Country of registration: Germany Test approval according to EC 2007/46 24/7-Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame: DB Novagrau Ramps: hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: 195f80ad09517628522e33a91, boş ağırlık: 7.300 kg, azami yük ağırlığı: 16.700 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis low-loader trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Ksdei Ri Rvepfx Afqjlt Aluminum side underrun protection Full-width rear mudflap Quarter-shell mudguards in front of the 1st axle 1st pair of wheel recesses embedded in the deep bed lane area after the step, sloped for entry, approx. 1600 mm long at the bottom, approx. 400 mm deep. Note: The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the deep bed lane area, sloped for entry, approx. 600 mm long at the bottom, approx. 300 mm deep. Note: The frame in the main beam area is 300 mm higher than the wheel recess. Extensions telescopic to 3,000 mm (not at rear taper) (The track width of the construction machines or vehicles to be transported, however, must not exceed the external frame width of 2,550 mm) Extensions telescopic to 3,000 mm, also in the wheel recesses at the bottom, foldable at the wheel recess extensions (widening not at the rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Lashing eyes low-loader 1 pair of lashing cutouts in the front longitudinal beam, recessed in the area of the step, each rated for 10 t 4 pairs of lashing holes in the external frame, each rated for 5 t (for attachment of lashing straps) 7 pairs of lashing mushrooms recessed at the top and side in the external frame, each rated for 10 t 1 x front in the step 6 x in the deep bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Drawgear - Turntable trailer drawbar Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tyres 235/75 R 17.5 manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connecting lines to the tractor unit, ABS and ALB, with ABS connector at the front, including interconnecting cable. Attention: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow side LED lighting, 2 white position lights in front 2 white/red lane marker lights at rear 2 x 7-pin foolproof plugs at front with connecting cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front step with steel/chequer plate covering Storage box recessed in the approach slope to the step, followed by 70 mm softwood floor, in the wheel housing area with steel/chequer plate covering Rear slope with 70 mm softwood floor Low-loader area including rear slope 6500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable with wooden covering with spring-assist lifting Operating notes For an axle load of 10,000 kg, a special permit is required; only indivisible loads permitted!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achieved while observing the permissible axle, load and fifth wheel loads. (Poor d

Koşul: yeni, makine/araç numarası: 2dff0c136c85096f36822a0bb, boş ağırlık: 7.150 kg, azami yük ağırlığı: 16.850 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring, tool box recessed into turntable front section Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear spray flaps Extendable widening sections up to 3,000 mm (not including rear taper) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber boards on the loading platform 70 mm timber boards for widening up to 3,000 mm Lashing eyes for low loader 3 pairs of 10 t lashing points integrated into the front floor 6 pairs of 10 t lashing mushrooms, recessed into the upper and side outer frame 1x in the neck area The remainder are distributed in between, distance not greater than 1,200 mm 1x rear taper 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Towing Device Trailer Turntable Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Brake System 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake included. Kjdpoi Riy Ejfx Afqelt 2 non-interchangeable coupling heads at the front, with connecting lines to tractor unit ABS and ALB with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Twin steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2x 7-pin non-interchangeable connectors at the front, with connecting cable 1 LED beacon with holder, operated via parking light (removable lamp) 2 pairs of warning signs, double LED illuminated and extendable to 3,000mm Floor Front area steel floor, then 70 mm softwood floor, steel/chequer plate covering in the wheel arch area Rear taper with 70 mm softwood floor Low-bed area incl. rear taper: 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Timber deck included With spring-assisted lifting Operating Notes At 10,000 kg axle load, an exemption certificate is required! Only indivisible loads permitted! The total weight specified is technically feasible; depending on the cargo, the total weight may not be achievable due to permissible axle, support, and fifth wheel loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips as per ECE R 048, side white and rear red Paint finish Frame DB 7350 Nova grey 10-year corrosion warranty Drawbar galvanized or black, manufacturer’s choice Steel loading ramps hot-dip galvanized Please note: Archive images!

Koşul: yeni, makine/araç numarası: 5067caac5acaa655d1d94bd2d, boş ağırlık: 760 kg, azami yük ağırlığı: 1.740 kg, toplam ağırlık: 2.500 kg, dingil konfigürasyonu: 1 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Central axle trailer chassis Fine-grain steel welded construction including 4 mounting points for IBC containers as technically feasible Customer drawing approval required upon order placement! 2 longitudinal beams as double-T sections for later self-supporting body installation, with front cross member 2 pairs of lashing eyes for securing the IBC container Telescopic support foot at the front Wheel chocks with holders Mudguards without side underrun protection Steel underrun protection Central axle trailer drawgear Drawbar with certified 40 mm towing eye, freight forwarding version Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension GFA or BPW axle, at manufacturer's discretion, with tapered roller bearings and S-cam brakes Axles/chassis laser-aligned to minimize tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mountings Wheels and tires 235 / 75 R 17.5 type at manufacturer's discretion Steel rims in factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 anti-mistake coupling heads at the front, with connecting lines to the towing vehicle, without ABS, but with mechanical ALB (automatic load sensing valve), thus max. 60 km/h road approval Electrics 24 volt, multi-chamber lights, without side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin anti-mistake plugs at front, with connecting cables Country of registration / Plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Kljdpfxsi Ri Ano Afqst Paintwork Frame: DB 7350 Novagrau 10-year warranty against rust-through Attention! These are archive images.

Koşul: yeni, makine/araç numarası: ee3256d63dd23b3ad1bdf9ab0, boş ağırlık: 10.280 kg, azami yük ağırlığı: 13.720 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Kledei Ri I Nopfx Afqst Rear spray guards across the entire width Quarter-circle mudguard in front of the 1st axle Excavator arm recess starting above rear axles and running to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t in the excavator arm recess, located on the side of the main frame approx. 300 mm from the front and approx. 200 mm before the rear chamfer 1 storage box recessed in the kink of the floor with lid, W=720 mm / L=520 mm / D=170 mm 1st pair of wheel wells recessed after the frame drop in the low-bed running gear area, with ramped entry, length at the bottom approx. 1,600 mm, approx. 400 mm deep. Note! The main frame is 400 mm higher in this area than the wheel well. 2nd pair of wheel wells between the axles in the low-bed section, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The main frame is 300 mm higher in this area than the wheel well. Removable wheel well covers, insertable from main frame, with timber inserts. Distance from outside main frame beam to beam in wheel well area approx. 1,280 mm Extendable widenings to 3,000 mm, folding at the wheel well extensions (widening not at the rear chamfer and not at the bottom of the wheel wells) (Track width of machinery/vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for timber planks, centrally on or under the loading surface as per technical feasibility Timber planks 70 mm for widening to 3,000 mm Lashing points for low-bed trailer 1 pair of ring lashing eyes recessed at the front on the frame drop, each rated 5 t 8 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated 10 t 2 x front on frame drop 6 x in the low-bed first lashing eye 250 mm from front and last max. 250 mm from rear, spacing between lashing eyes no greater than 1,100 mm 5 pairs of ring lashing eyes recessed into the outer frame, each rated 5 t (convertible to stake pockets) Drawbar and turntable for trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8° Axles + Suspension SAF drum brake axles Axles/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension with independently controllable raise & lower valves at front and rear Wheels and tyres 235/75 R 17.5 Manufacturer’s choice Steel rims, twin-wheel arrangement, factory silver Braking system 2-line compressed air braking system Spring-actuated parking brake Trailer Info Center, displays vehicle data such as axle load (not calibrated) and odometer Axle load detection via EBS-CAN bus signal, display in cab (truck must be pre-equipped accordingly, no truck installation, not a calibrated scale) Vehicle stability system Duomatic coupling at front, with connecting line to tractor vehicle EBS (Electronic Braking System) with EBS connector at front, with connection cable Note: The trailer must only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics 24 Volt, multi-chamber LED taillights with resistor, lateral amber LED lights, licence plate LED illumination (Note: with certain towing vehicles false diagnostics may occur even though functionality is guaranteed) 2 front position lights in LED 2 rear lane marking lights in white/red

Koşul: yeni, makine/araç numarası: 2b58968e34fac93b429a256e9, boş ağırlık: 5 kg, azami yük ağırlığı: 12 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis – Low-bed Trailer - Steel welded construction - Turntable with heavy-duty ball race, storage box recessed in turntable front section - Foldable rear support - Wheel chocks with holders - Aluminum side underrun protection - Full-width rear spray flap - Quarter shell mudguards in front of 1st axle - Spare wheel carrier for 1 spare wheel, with attachment kit - Spare wheel, same brand and specification as base tires, steel rim - Plastic toolbox with insert shelf, dimensions: width=620 / height=360 / depth=440 mm, lockable with a padlock (lock not included) Tie-down Points Low-bed - 3 pairs of lashing points, each rated for 10 tons, integrated into the floor at the front - 6 pairs of lashing studs, inserted in the upper and side outer frame, each for 10 tons; 1 in the gooseneck area, remaining distributed with max spacing of 1200 mm; 1 at rear incline - 5 pairs of ring-type lashing eyes recessed into the outer frame, each rated for 5 tons (convertible to stake pockets) Trailer Drawbar/Turntable - Drawbar with tested 40 mm towing eye Axles & Suspension - SAF drum brake axles - Axles/chassis laser aligned to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tires - 235/75 R17.5 - Tire brand at manufacturer’s discretion - Steel twin-mounted rims, factory silver Braking System - 2-line air brake system - Spring-loaded parking brake - 2 reverse-polarity-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS plug at the front, connection cable, voltage converter for 12/24 volt operation Note: A 7-pin 12V socket on the tractor/hauler is required (required for electrics with voltage converter!) Warning: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Kodpfji Ri Nxsx Afqjlt Electrics - 24 volts, multi-chamber lighting, yellow LED side markers - 2 white/red track lights at the rear - 2 white position lights at the front - Additional LED work light at the rear, operated via reverse gear - 2 x 7-pin reverse-polarity-proof plugs at the front, with connecting cable - 1 x 7-pin agricultural plug - Voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor - Steel floor in the front area, followed by 70 mm softwood floor - In the wheel arch area: steel / chequer plate covering - Rear incline with 70 mm softwood floor - Low-bed platform including rear incline: 8,200 mm Access Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wooden overlay - Spring-lift assisted Operating Instructions - A special permit is required for 10,000 kg axle load. The permit must be applied for separately in each federal state; approval for 20-ton GVW is at the discretion of the authorities – customer’s responsibility. Country of Registration / License Plates - Registration country: Germany - With Dekra inspection and expert's report (according to §13 EC-FGV) - 24/7 service hotline - Prepared for two-line license plate holder - Reflective contour marking as per ECE R 048, white on the sides and red at the rear Paintwork - Frame: DB 7350 Novagrau - 10-year anti-perforation warranty - Drawbar: galvanized or painted black, depending on manufacturer's choice - Ramps: hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 56c59c8aba35227ffb44c9f75, boş ağırlık: 11.350 kg, azami yük ağırlığı: 26.650 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Jumbo Chassis Semi-Trailer Steel welded construction with closely spaced cross members, reinforced design, low-loader outer frame profile, suitable for transporting construction machinery up to 32,000 kg and a maximum external machine width of 2550 mm, fifth wheel plate with interchangeable 2'' kingpins. Rear slant approx. 1200 mm at 7°. Enclosed upper ramp shaft with steel/tread plate. In the low-bed section, omega rail laterally below the outer frame serves as a hanging strip for tarpaulins and distance holders for the lashing mushrooms, not in the wheel area. For the lift table: an additional fixed lightweight outer frame with omega profile allows for the lift table to be raised with closed tarpaulin! 24 t, 2-speed landing gear with single-side operation, half-round base and straight mounting plate, with thrust compensation. Free swing radius to rear: approx. 1950 mm. Rear support foldable 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-shell mudguards at front and rear of each axle Anti-spray flaps behind each axle Rear underrun protection made of steel Kljdei Riw Aopfx Afqjt Full-width spray flap across the rear 4 stainless steel toolboxes, w=800/h=350/d=350 mm, with polished doors, lockable; 2 each on FR-left and FR-right in front of the 1st axle Lift table after gooseneck, approx. 3000 mm long, hydraulically liftable for driving over the gooseneck, with mechanical locking in raised position (cylinder angled for good ground clearance, Fliegl standard). Controls on FR-right + additional operation via wireless remote control (same as ramp operation). Lift table can be raised with tarpaulin closed! Tarpaulin hanging on lift table area on an additional lightweight fixed outer frame with omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms remain usable even when table is lowered! Lashing points Gooseneck: 4 pairs of 5 t lashing rings recessed into outer frame 2 pairs of lashing mushrooms, both above and on the sides, recessed into outer frame Low-bed: 8 pairs of lashing mushrooms, both top and side, recessed into outer frame, each 10 t 't 9 pairs of 5 t in outer frame Axles & Suspension SAF drum brake axles Last axle steered, with automatic reverse lock via reversing light, and additional lock feature on vehicle via hand button Air suspension with lift & lower valve + auto-reset function H & S function with quick venting 1st axle is an automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid is functional up to 30% axle load exceedance and up to a max. speed of 25 km/h) Axle lift is below recommended driving height, therefore no guarantee for tire damage Wheels and Tyres 235 / 75 R 17.5 from leading manufacturers Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 tamper-proof coupling heads at front, no connecting line EBS, electronic braking system with EBS socket at front, no connecting cable Note: The trailer may only be towed by trucks that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck installation (no calibrated scale) Electrical System 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front, in LED 2 white/red lane marker lights at the rear 1 rotating beacon with holder, switchable via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and e

Koşul: yeni, makine/araç numarası: ebf3f771e96394cd89e56bbb7, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the exterior floor/frame, each rated at 5t 2 additional pairs of lashing eyes bolted to the floor in the corners, each rated at 5t Front support leg, gearbox type Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mud flaps Quarter mudguards 1 plastic toolbox with shelf, dimensions b=620/h=360/d=440 mm, lockable with a padlock (padlock not included) Drawbar Central Axle Trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension Drum brake axles as per manufacturer's specification Axle/chassis laser alignment for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (balancing rocker) Wheels and Tyres 235 / 75 R 17.5 as per manufacturer's specification Factory silver steel rims Brake System 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connecting lines to the tractor ABS and ALB, with ABS socket at the front and connecting cable Electrics 24 Volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, with connecting cable Floor Ksdpfx Aei Rixrefqolt Steel chequered plate floor for high point load capacity Note: Slight floor undulation due to welding distortion possible! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner posts 25 mm aluminium hollow profile, 400 mm high Side walls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner posts 1 pair steel posts fixed to the frame with holders to secure loading ramps, clear entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on ramps Surfaced with 3 serrated steel tracks Gas strut support for single person operation Registration Country/ Plates Registration country: Germany 24/7 service hotline Prepared for single-line licence plate holder Contour marking with reflective tape as per ECE R 048, white at the sides and red at the rear Paintwork Frame hot-dip galvanised including passivation 15-year warranty against rust-through Front wall aluminium Side wall aluminium anodised Loading ramps hot-dip galvanised Note: These are archive images.

Koşul: yeni, makine/araç numarası: e763c8c2bb3370bd2342236a4, boş ağırlık: 3 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball tip bearing Gearbox support leg at the front 2 wheel chocks with holders Steel underrun protection Lockable storage compartment for loading ramps underneath the platform Ksdpfx Afji Rizbsqslt Central axle trailer drawbar Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension Euro-axles at our discretion, with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalisation (rocker equaliser) Wheels and Tyres 235/75 R 17.5 manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Colour-coded line routing for easy servicing Hand spindle parking brake Integral air reservoir Without ABS, but with mechanical ALB. Maximum permissible speed: 60 km/h 2 unmistakable coupling heads at the front with connecting lines to the tractor unit Electrics 12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors 2 white position lights at the front 2 white/red marker lights at the rear 1 x 7-pin 12 Volt plug at the front, with connecting cable approx. 60 cm extended Hydraulics Three-way tipper, hydraulic multi-piston press with stroke limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose Operation hydraulically via PTO from the truck Tipper Body Robust tipper body with 4 mm steel sheet floor, steel drop side body, continuous side walls, fold-down and pivot-mounted with central locking at the bottom. Removable corner posts at the rear. Rear wall fold-down and pivot-mounted with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 t Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution) Country of Registration / Licence Plates Country of registration: Germany with Dekra approval and certificate for max. 60 km/h registration, towing vehicle agricultural or forestry tractor (country of registration Switzerland max. 40 km/h possible) Prepared for single-line license plate holder Without contour marking / reflective stripes according to ECE R 048 Paintwork Frame hot-dip galvanised incl. passivation, 15-year warranty against rust-through Side walls/body RAL 3002 Carmine Red Note! If the body is galvanised, it will not be painted! Note! Body interior only primed! Wide tyres possible at extra cost. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Koşul: yeni, makine/araç numarası: 408ba9a39bbb8087056d6e563, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear splash guard Semi-shell mudguards on 1st and 2nd axles with anti-spray flaps behind each axle, anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess over the rear axles, running to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated 5 t each in the excavator arm recess at the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear incline 1 plastic toolbox, with insert shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) 1 storage box recessed in the gooseneck in the floor with lid, W=720 mm/L=520 mm/D=170 mm Extendable width to 3,000 mm (not in the rear incline) (track width of machines or vehicles to be transported must not exceed outer frame width of 2,550 mm) Timber beams 70 mm for extension to 3,000 mm Storage compartment for timber beams under loading area Lashing rings lowbed (40 lashing points) 1 pair of lashing rings on gooseneck, each 5t 9 pairs of lashing studs, integrated in the top and side of outer frame, each 10t 2 x on gooseneck in front 7 x in the lowbed area 6 pairs of lashing holes in the outer frame of the lowbed area, 5 t each (for tie-down straps) 3 additional pairs of folding lashing rings, each 10 t 1 x inside next to main frame at start of lowbed 1 x on gooseneck (protrudes) 1 x recessed in the floor behind the last axle Trailer drawbar assembly Drawbar with tested 50 mm towing eye, towing eye inclined at 8°, D-value minimum 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 as selected by manufacturer Steel twin wheels, factory silver Brake system 2-line air brake system Spring-loaded parking brake 2 anti-mismatch coupling heads at front, with connection lines to truck ABS and ALB, with ABS plug at front, with connection cable Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red marker lights at rear Klsdpfei Ri Daox Afqet 2 x 7-pin anti-mismatch plugs at front, with connection cable 1 LED rotating beacon with holder, controlled via parking light (beacon detachable) 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Gooseneck at front with steel/aluminium chequer plate covering followed by 70 mm softwood floor, with steel/aluminium chequer plate over wheel wells Rear incline with 70 mm softwood floor Access ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable with timber surfacing Hydraulic, powered via tractor PTO with flow restrictor, controlled laterally front left Hydraulic connection with SVK plug NW 10/3, including connecting hose Approval country / Plates Approval country: Germany 24/7 service hotline Prepared for two-line number plate holder Contour marking with reflective tape as per ECE R 048, side white and rear red Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15 years corrosion perforation warranty Drawbar galvanized or black, as per manufacturer’s choice Access ramps hot-dip galvanized Note: Images are for illustrative purposes (archive images)!

Koşul: yeni, makine/araç numarası: ede0610378cbe39cc4883251d, boş ağırlık: 24.000 kg, azami yük ağırlığı: 7.550 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction 1st pair of wheel recesses integrated into the steel platform in the driving aisle area, tapered for entry, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! The frame is 400 mm higher than the wheel recess in the main beam area. If machines are to be transported and the total height needs to be checked, we kindly request the technical datasheet of the machine types with exact specifications (if total height is exceeded -> customer risk, approval required). Depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with heavy-duty ball bearing slewing ring, toolbox integrated into the turntable front section Rear support foldable 2 wheel chocks with holders Side underrun protection in aluminium Rear mudflaps across the full width Extendable widening to 3,000 mm (not in rear bevel area) (The track width of the machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing points for low loader 3 pairs of lashing points integrated into the front floor, each 10 t Incl. 6 pairs of lashing mushrooms recessed in the upper and side external frame, each 10 t 1 x in the gooseneck area The rest distributed in between, distance not greater than 1200 mm 1 x rear bevel 5 pairs of stake pockets recessed into the external frame, inside 70 x 40 mm (convertible to 5 t ring lashing points, not included) Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles + Suspension SAF drum brake axles Axle/undercarriage laser measured for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Brake System 2-line compressed air brake system Colour-coded piping for easy servicing Spring-actuated parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the truck ABS and ALB, with ABS socket at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure the effective operation of the ABS! Wheels and Tyres 235 / 75 R 17.5 manufacturer's choice Klsdpfx Afji Ri Rysqet Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red rear marker lights 2 x 7-pin non-interchangeable plugs at the front, with connection cable 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Steel floor in the front section, incl. followed by 70 mm softwood floor, wheel arch areas with steel/checkered plate covering Rear bevel with 70 mm softwood floor Low loader platform incl. rear bevel 8,200 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring lift assistance Operating Instructions With 10,000 kg axle load an exemption permit is required, only indivisible loads possible!!! The total weight stated is technically feasible; depending on the cargo, the total weight may not be achievable within the permitted axle, support, and fifth wheel loads (Poor driving and trailing behaviour possible due to incorrect load distribution) Country of Approval / Plates Country of approval: Germany Incl. with Dekra approval and certificate (acco

Koşul: yeni, makine/araç numarası: 15431365fe5515297a6a9fb05, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mudflap Half-shell mudguards for 1st and 2nd axles with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind the 3rd and 4th axles Digger arm recess above the rear axles, extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep; 2 pairs of lashing holes (5 t each) in the digger arm recess, laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear incline 1 plastic toolbox with shelf insert, W=620/H=360/D=440 mm, lockable with a padlock (padlock not included) 1 storage box recessed into neck section in the floor, with lid, W=720 mm / L=520 mm / D=170 mm Extendable widenings to 3,000 mm 70 mm wooden planks for widening to 3,000 mm Storage compartment for wooden planks under the loading area Low-bed trailer lashing points (40 lashing options) 1 pair of 5 t lashing eyes on gooseneck 9 pairs of 10 t lashing pins, recessed into the top and side of the external frame 2 x on the front gooseneck 7 x in the low-bed area 6 pairs of 5 t lashing holes in the external frame of the low-bed (for hook-in tie-down straps) 3 additional pairs of foldable lashing eyes, each 10 t 1 x inside next to the main frame at the start of the low-bed 1 x on the gooseneck (overhanging) 1 x recessed in the floor behind the last axle Trailer drawbar Towing bar with tested 50 mm towing eye, 8° inclined towing eye, D-value at least 160 kN Axles & Suspension Drum brake axles Ksdpsi Ri A Sjfx Afqjlt Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker compensation) Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin wheel configuration, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS socket at the front, with connecting cable Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red tracking lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable 1 LED beacon with holder, operated via parking lights (removable beacon) 2 pairs of double warning boards, LED illuminated and extendable to 3,000 mm Floor Front gooseneck section with steel/chequer plate covering Proceeding with 70 mm softwood flooring, steel/chequer plate covering in the wheel arch area Rear incline with 70 mm softwood flooring Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lift assistance Registration/country plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Conspicuity markings with reflective strips according to ECE R 048, side white and rear red Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized incl. passivation—15-year corrosion warranty Towing bar galvanized or black, at manufacturer’s option Ramps hot-dip galvanized Note: These are archive photos!

Koşul: yeni, makine/araç numarası: d461243f559015adca5bb372c, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis for Low-Loader Trailer Steel welded construction Turntable bogie with heavy-duty slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Half-shell fenders on 1st axle with anti-spray flaps Additional anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox, with tray, width = 620 mm, height = 360 mm, depth = 440 mm, lockable with padlock Extendable width up to 3,000 mm Central storage compartment for wooden planks in the loading area 70 mm wooden planks for extension to 3,000 mm Lashing rings for low-loader (40 securing points) 1 pair of lashing cutouts indented in the front longitudinal beam (cranked zone), each rated for 10 t Klsdpfxji Ri Dls Afqot 4 pairs of lashing holes in the outer frame, each rated for 5 t (for tensioning straps) 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated for 10 t 1 x at the front on the cranked zone 6 x in the low-bed First lashing ring 250 mm from front and last one max. 250 mm from rear; spacing between lashing rings not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, inside dimensions 70 x 40 mm, convertible to 5 t ring lashing eyes 2 additional pairs of folding lashing rings, each rated for 10 t 1 x on the cranked zone (protruding) 1 x recessed in the floor behind the last axle Drawbar / Turntable coupling Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 anti-swap coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front, including connecting cable Make: Wabco, Knorr or Haldex Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin anti-swap plugs at the front, with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning panels, LED illuminated and extendable to 3,000 mm Floor Front cranked section with steel / tread plate surface Storage box recessed in the ramp transition to cranked section Followed by 70 mm softwood floor, in wheel arch area with steel / tread plate surface Rear bevel with 70 mm softwood floor Low-loader area incl. rear bevel: 6,500 mm Loading Ramps Steel ramps, 2,800 mm length, 750 mm width, laterally adjustable Wooden inlay Hydraulically operated via tractor auxiliary drive with restrictor, operation on left side, FR Hydraulic connection with SVK coupling NW 10/3, including connecting hose Registration / Plates Country of registration: Germany 24/7 Service Hotline Prepared for two-line plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning panel according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Drawbar galvanized or black, manufacturer’s choice Ramps hot-dip galvanized Note! These are archive images!

Koşul: yeni, makine/araç numarası: dd98a7658922be8f2e25bcadb, boş ağırlık: 2 kg, azami yük ağırlığı: 8 kg, toplam ağırlık: 10 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235/75 r 17,5, Further Information Chassis Central Axle Low Loader Trailer Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 wheel chocks with holders Steel fenders over both wheels Central axle trailer coupling system Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Kodpfxei Ri Ebj Afqelt Axles & Suspension Euro-axles of our choice, with tapered roller bearings and S-cam brakes Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5 as per manufacturer's selection Steel rims in factory silver Braking System Dual-circuit compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to towing vehicle ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that can ensure the functionality of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin, non-interchangeable connectors at the front, with connecting cable Platform TTS Low-profile steel trough, platform floor with steel/chequer plate covering, steel walls solidly welded to the floor Platform length 4500 mm Trough front and sides with load-lock profile for lashing strap attachment (8 points at the front, 12 per side) Note: Slight floor waviness due to welding distortion possible! 2 pairs of lashing rings, 1 pair at the front corners of the steel trough, 1 pair at the rear in the floor, each rated to 5 tons 2 additional pairs of lashing rings in the floor, each rated to 5 tons Loading Ramps Steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with handle on the ramps Wooden surfaces Gas spring assist for single-person operation Operating Instructions The specified total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permitted axle, support, and kingpin loads. (Poor driving and tracking behavior possible due to improper load distribution) Country of Registration/Plates Country of registration: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white at the sides and red at the rear Paintwork Frame RAL 3002 Carmine Red Loading ramps hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: a3b1347da4aa7f31dceb875db, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Central axle trailer Fine-grain steel welded construction 6 pairs of lashing eyes bolted to the floor/outer frame, each rated for 5 tons Gear support leg at front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear spray flaps Quarter-shell mudguards Central axle trailer drawbar Drawbar with certified 40 mm draw eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer's choice Steel rims, factory silver Brake System 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at front with connections to the towing vehicle ABS and ALB, with ABS connector at front, incl. connection cable Attention: The trailer may only be towed by traction vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side LED marker lights (amber) 2 white position lights at front 2 white/red lane marker lights at rear Klodpfxji Ri Ilo Afqot 2 x 7-pin non-interchangeable plugs at front, with connecting cables Floor Steel / checker plate for high point load capacity Note: Slight floor warping possible due to welding distortion! Platform length approx. 5,200 mm Rear taper approx. 900 mm Front wall / corner stanchions 25 mm aluminium hollow section, 320 mm high Side walls 25 mm aluminium hollow section, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame with bracket for securing the loading ramps, drive-on width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with carry handles Wooden surface With gas strut for one-man operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable due to permitted axle, support, and kingpin loads (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany With Dekra inspection and appraisal (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Paintwork Frame DB 7350 Novagrau 10-year warranty against rust-through Front wall aluminium Sidewalls aluminium, anodised Loading ramps hot-dip galvanised Note: Archive images!

Koşul: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Kodpfx Afoi Riwijqjlt Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Koşul: yeni, makine/araç numarası: 628cde0fe99cc2d3c8eaa8dd8, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Lowbed trailer chassis Steel welded construction Turntable with robust ball bearing ring Foldable rear support 2 wheel chocks with holders Klodpsi Ri Ddofx Afqst Aluminum side underrun protection Full-width rear splash guards Half-shell fenders on axle 1 with anti-spray mudflaps, anti-spray mudflaps behind axles 2 and 3 1 plastic toolbox with shelf insert, dimensions: 620 x 360 x 440 mm (W x H x D), lockable with a padlock (padlock not included) Extendable widenings up to 3,000 mm Storage compartment for timber planks in the center of the loading area 70 mm timber planks for extension to 3,000 mm Lashing eyes for low loader (40 lashing points) 1 pair of lashing cutouts in the front longitudinal beam, recessed in the cranked area, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching lashing straps) 7 pairs of recessed lashing mushrooms on top and side of outer frame, each 10 t 1 front cranked area 6 in the lowbed deck First lashing eye 250 mm from the front, last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 2 pairs of additional folding lashing eyes, each 10 t 1 located in the cranked area (protruding) 1 recessed in the floor behind the last axle Towing equipment for turntable trailer Drawbar with certified 40 mm towing eye Axles & Suspension Drum brake axles (manufacturer’s choice) Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and tires 235 / 75 R 17.5 (manufacturer’s choice) Steel rims, dual configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads front, with connecting lines to the tractor unit, ABS and ALB, with ABS plug front, with connection cable Brand: Wabco or Knorr Electric system 24 volt, multi-chamber lights, yellow LED side marker lights 2 white front position lights 2 white/red lane marker lights rear 2 x 7-pin non-interchangeable plugs at front, with connecting cable 1 LED rotating beacon light with bracket, switched via parking light (removable lamp) 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor Front crank area with steel / chequer plate covering Toolbox recessed in the ramp bevel to the crank Then 70 mm softwood floor, steel / chequer plate covering in wheel arch area Rear ramp bevel with 70 mm softwood floor Lowbed loading area incl. rear ramp bevel: 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered With spring assist Country of approval / Number plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning board according to ECE-70 Painting Frame hot-dip galvanized incl. passivation 15-year warranty against corrosion Drawbar galvanized or black, as per manufacturer’s choice Loading ramps hot-dip galvanized Attention! These are archive images!

Koşul: yeni, makine/araç numarası: 55d3c5c03e032385649769b1b, boş ağırlık: 9.900 kg, azami yük ağırlığı: 14.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box included. Turntable drawbar Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Extendable widening to 3,000 mm (not at rear chamfer) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central wooden plank storage compartment 70 mm wooden planks for widening to 3,000 mm Low loader lashing rings 3 pairs of lashing points rated 10 tonnes each, integrated at the front 6 pairs of lashing mushrooms, recessed in the upper and side outer frame, each rated at 10 tonnes 1 x in the neck area The remaining pairs are spaced at intervals no greater than 1,200 mm 1 x at the rear chamfer 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Turntable trailer drawbar system Drawbar with certified 40 mm towing eye Note! With 40 mm towing eye, the permissible total weight of the truck must not exceed 18,000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-measured axles/chassis for reduced tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation at front and rear (rocker compensation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin configuration, factory silver Braking System 2-line pneumatic brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at front and connection cable Note: The trailer may only be towed by vehicles capable of ensuring effective ABS operation! Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable connectors at front, with connecting cable 1 LED beacon with bracket, operated via parking light (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Steel floor at front Followed by 70 mm softwood floor, steel/chequer plate in wheel arch area Rear chamfer with 70 mm softwood floor Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-decked With spring-assisted support Operating Instructions An exemption permit is required for a 10,000 kg axle load, only indivisible loads permitted! The stated total weight is technically feasible; depending on the load, the total weight may not be achieved while adhering to the permitted axle, support, and kingpin loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country Signs Country of registration: Germany 1 with Dekra inspection and report (according to §13 EC - FGV) 24/7 Service Hotline Prepared for two-line licence plate holder Contour markings with reflective strips to ECE R 048, white on sides and red at rear Paintwork Frame RAL 3002 Carmine Red 10-year anti-perforation warranty Drawbar, galvanised or black, as per manufacturer specification Kjdpfx Aoi Ri I Eefqslt Access ramps hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System Ksdoi Ri Nuopfx Afqolt 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: f8fb99947a1c19bc4d63549ff, boş ağırlık: 6 kg, azami yük ağırlığı: 17 kg, toplam ağırlık: 24 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Kljdpfxoi Riwfj Afqet Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing race Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flaps Half-shell fenders on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with padlock (padlock not included) Extendable widening to 3,000 mm (not at the rear chamfer) (the track width of machines or vehicles to be transported must not exceed 2,550 mm outer frame width) Central storage compartment for wooden beams on the loading area 70 mm wooden beams for widening to 3,000 mm Lashing points on low loader 1 pair of recessed ring lashing eyes at the front on the gooseneck, each rated 5t 7 pairs of mushroom lashing points, recessed at top and side in outer frame, each rated 10t 1x at the front on the gooseneck 6x in the drop deck First lashing point 250 mm from front, last max. 250 mm from rear, distance between lashing eyes not greater than 1,100 mm 5 pairs of stake pockets recessed in side frame, internal dimension 70 x 40 mm (convertible for 5t ring lashing eyes, not included) 2 pairs of additional fold-down lashing eyes, each rated 10t 1x on the gooseneck (projecting) 1x recessed in the floor behind the last axle Trailer turntable drawgear Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (equalising rocker) Wheels and Tyres 235 / 75 R 17.5 Manufacturer's choice with M&S marking Steel wheels in twin arrangement, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connection lines to the towing vehicle ABS and ALB, with ABS connector at front, with connection cable Brand: Wabco or Knorr Note: This trailer may only be towed by vehicles which ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear outline marker lights 2 x 7-pin non-interchangeable plugs at front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000mm Floor Gooseneck at front with steel/chequer plate covering Storage box recessed on the transition slope to gooseneck After that, 70 mm softwood floor, steel/chequer plate covering in wheel arch area Rear slope with 70 mm softwood floor Low-bed platform including rear slope 6,500 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety support, foldable underneath (prevents lateral slipping of the ramps, not in conjunction with hydraulic side ramp shift) Wooden inlay on ramps Spring lifting assistance Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads possible!!! The stated total weight is technically possible; depending on the load, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and trailing behaviour may result from incorrect load distribution) Country of registration/Plates Country of registration: Germany Approval according t

Koşul: yeni, makine/araç numarası: e7fbe178b85a202cade7e95af, boş ağırlık: 5 kg, azami yük ağırlığı: 22 kg, toplam ağırlık: 29 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis: Semitrailer for Forwarding Operators Fine-grain structural steel welded construction, fifth wheel plate with replaceable 2" kingpin, with two kingpin positions. Outer frame slightly inclined with Load-Lock profile for lashing strap hooks. Note! To hook lashing straps in combination with side walls, the side walls must be opened! 2 pairs of lashing eyes recessed in the gooseneck outer frame, each rated at 5 tonnes. 8 pairs of lashing eyes recessed in the outer frame at the lowbed area, each rated at 5 tonnes. 24-ton 2-speed landing gear, single-sided operation, with straight base, without compensating mechanism. 2 wheel chocks with holder. Aluminum side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind axle assembly. 2 stainless steel toolboxes, width=600/height=400/depth=500 mm, with polished, lockable door. 2 pairs of stake pockets recessed in the gooseneck outer frame, inner dimension 70 x 40 mm. 6 pairs of stake pockets recessed in the outer frame at the lowbed area, inner dimension 70 x 40 mm. Internal width between stakes: 2420 mm! 3 lashing/stake rails in the lowbed, transversely embedded in the floor, over the entire width to the outer frame (usable internal width between outer removable stakes approx. 2170 mm), approx. 100 mm high; with 20 mm round steel bars, top and bottom, spacing between bars approx. 60 mm. Bottom finished with angle sheet, half open downward. Suitable for lashing and inserting stakes 80 x 80 mm. Removable stakes, width=80/depth=50/length=1200 mm, hot-dip galvanized. Removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Note: Stake pockets/removable stakes are not intended for the sole securing of long materials, pipes, etc. without additional lashing. Mechanical rear extension with hand crank, extendable by approx. 1,500 mm, lockable every 500 mm. Comes with support beam, load capacity over the entire width: 2,000 kg at 500 mm, 1,000 kg at 1,000 mm, and 500 kg at 1,500 mm. Includes retractable rear underrun protection with lighting. 2 pairs of removable stakes, width=80/depth=80/length=1200 mm, hot-dip galvanized. Open storage compartment for removable stakes, at the front wall or under the loading area (for 10 removable stakes 80 x 50 x 1200 mm and 4 removable stakes 80 x 80 x 1200 mm). Klsdpfxei Ri Hve Afqot Axles + Suspension SAF drum brake axles. Axle/chassis laser alignment - reduces tire wear and fuel consumption. Last axle is self-steering with automatic reverse lock via reverse light, and additional lock function on the vehicle via hand knob. Air suspension with raise & lower valve. Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice. Steel twin wheels, factory silver. Braking System 2-line compressed air brake system. Spring-loaded parking brake. 2 foolproof coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS CAN bus signal for display in the truck cab. The truck must be correspondingly equipped; no truck installation or calibrated weighing system included. Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lights. 2 white position lights at the front. 2 white/red track marker lights at the rear. 2 x 7-pin sockets at the front, without connecting cable. 2 additional LED work lights at the rea

Koşul: yeni, makine/araç numarası: f79a9f15e7131d57a512793ab, boş ağırlık: 8.900 kg, azami yük ağırlığı: 15.100 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 3 aks, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports 2 wheel chocks with holders Side underrun protection in aluminium Rear spray flaps over the entire width Quarter shell mudguard in front of the 1st axle Extendable side extensions to 3,000 mm (not in rear chamfer area) (The track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for timber planks in the middle of the loading platform 70 mm timber planks for extension to 3,000 mm Lashing eyes low-loader 1 pair of lashing eyes on the gooseneck, each with 5 t capacity 9 pairs of lashing mushrooms recessed in top and side of outer frame, each with 10 t capacity 2 x on the gooseneck front 7 x in the low bed 6 pairs of lashing holes in the outer frame of the low bed, each with 5 t capacity (for attaching tie-down straps) Coupling Device for Turntable Trailer Drawbar with certified 50 mm towing eye Axles/Suspension SAF drum brake axles Laser-aligned axles/chassis - reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical inclusion Axle load compensation front and rear (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel twin wheels, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lamps, yellow LED side lights 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with bracket, switched via parking lights (removable lamp) 2 pairs of double warning boards, LED illuminated, extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connection cable Floor Gooseneck front with steel/checker plate then with 70 mm softwood floor, in the wheel arch area with steel/checker plate Rear ramp with 70 mm softwood floor Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable timber-covered Hydraulically operated via tractor power take-off with throttle, control on the left side at the front Hydraulic connection with SVK plug NW 10/3, incl. hose Operating Instructions Kledpfji Ri Izex Afqot For an axle load of 10,000 kg, a special permit is required, only indivisible loads allowed!!! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achieved within the permissible axle/support/saddle loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Registration country: Germany with Dekra acceptance and report (according to §13 EC - FGV) 24/7 service hotline included prepared for double-line license plate holder Contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10 year warranty against rust-through Drawbar galvanised or black, at manufacturer's discretion Loading ramps hot-dip galvanised

Koşul: yeni, azami yük ağırlığı: 34.600 kg, toplam ağırlık: 49.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2025, EuroCompact FL 02 Düz Yatak Çift Teleskoplu, Pandül Akslı Ağırlıklar Hız 80 km/s Klodpfsx Nupxex Afqst Beşinci teker yükü 25.000 kg Aks yükü 2 x 12.000 kg Azami toplam ağırlık 49.000 kg Boş ağırlık yaklaşık 14.400 kg Yük kapasitesi 34.600 kg Kuğu Boynu Uzunluk x Genişlik 3.700 mm x 2.480 mm Sadelik yüksekliği (yüklenmiş) 1.300 mm Dönüş yarıçapı ön/arka 1.350 mm / 2.250 mm Kingpin Beşinci teker yükü 25.000 kg Düz yatak köprüsü 2 x Çift teleskopik Uzunluk x Genişlik 6.620 mm + 5.050 mm + 5.330 mm x 2.550 mm genişletilebilir 3.000 mm’ye kadar teleskopik olarak 5.050 mm + 5.330 mm ile yatağın üzerinde 17.000 mm’ye kadar Yapı yüksekliği 260 mm yüklüken yükseklik yaklaşık 360 mm, yerden 100 mm serbestlik ile 2 Dingilli Arka Şasi Aks mesafesi 1.360 mm Tekli lastik 245/70 R 17,5 ile Gigant pandül akslar 12-14 t aks yükü Zorunlu yönlendirme Şasinin arka kısmında ekskavatör çukuru Şasi uzunluğu 2.700 mm Tüm fonksiyonlar için uzaktan kumanda Merkezi yağlama sistemi Elektro jeneratörü Rampa takozları Düşük yatağa konteyner yuvaları Genişletmeler

Koşul: yeni, boş ağırlık: 3.900 kg, azami yük ağırlığı: 9.700 kg, toplam ağırlık: 13.600 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 7.280 mm, yükleme alanı genişliği: 2.450 mm, süspansiyon: hava, lastik boyutu: 205/65 r17,5, dingil mesafesi: 1.270 mm, Üretim yılı: 2026, Donanım: ABS, tır çekici bağlantısı, HBTZ 137224 BS tandem, arka kısmı eğimli   400 mm alüminyum yan duvarlar   Yükleme alanı arka kısmı eğimli   Yükseklik 870 mm   Tanınmış markadan havalı süspansiyonlu akslar   ABS   Yüksekliği ayarlanabilir çeki oku   Tek parça yay rampaları   3 çift 10 tonluk sabitleme noktası   8 çift 2 tonluk sabitleme noktası   Tamamen galvanizli   205/65 R 17,5 lastikler Ksdpfx Aegi H Dpefqslt

Koşul: yeni, makine/araç numarası: dc46d2e1cd272305b99fb3160, boş ağırlık: 9.800 kg, azami yük ağırlığı: 31.200 kg, toplam ağırlık: 41.000 kg, dingil konfigürasyonu: 3 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Vehicle consists of: Chassis: Low-bed semi-trailer Steel welded construction, kingpin plate with replaceable 2-inch kingpin and two kingpin positions 24 t, 2-speed landing gear, operated from one side, with straight foot, without telescopic compensation Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Quarter-circle mudguards in front of and behind axle modules 1st pair of wheel recesses sunken into the low-bed loading area behind the gooseneck, bevelled for entry. Length at base approx. 1,600 mm, depth of recesses approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area. 2nd pair of wheel recesses between axles A and B. Length at base approx. 350 mm, depth approx. 260 mm. Note! The frame is 260 mm higher than the wheel recess in the main beam area. If wheel loaders are to be transported and the total height needs to be checked, please provide the technical data sheet for the respective wheel loader types with precise dimensions (if total height is exceeded -> customer assumes risk, permit required); depending on ground clearance under the machines, inserts in the wheel recesses may be required on the customer's side. Wheel recess covers pull-out from the main frame, with wooden inlays. Extensions can be pulled out to 3,000 mm (not possible in rear slope area and not at the base of the wheel recesses) (track width of construction machines/vehicles to be transported must not exceed external frame width of 2,550 mm). Storage compartment for wooden planks on gooseneck, transverse at the front 70 mm wooden planks for widening to 3,000 mm Tie-down points on low-bed 2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck 11 pairs of lashing points (Zurrpilze) recessed into the top and side of external frame, each 10 t - 2x on gooseneck - 9x on low-bed deck (first eye 250 mm from the front, last max. 250 mm from the rear, distance between eyes not greater than 1,100 mm) 8 pairs of stanchion sockets recessed in the external frame, internal dimensions 70 x 40 mm, or alternatively 5 t ring lashing eyes recessed in the floor instead of sockets Axles + Suspension SAF drum braked axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 to manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at front, no connection cable Attention: The trailer may only be towed by tractors that ensure full ABS functionality! 2 non-interchangeable coupling heads at front, without connecting pipe With lifting & lowering valve Axle load detection via EBS CAN bus signal, for indication on the truck’s cab display – truck must be pre-equipped accordingly, not truck-installed (not certified as a weighing system) Vehicle stability control system Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Klodpsi Ri Hcjfx Afqot 1 x LED beacon with bracket, controlled via parking light (rotating beacon detachable) 2 pairs of warning boards, double-sided, LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/checker plate covering Storage box integrated in inclined drive-over area to gooseneck - Then 70 mm softwoo