Kullanılmış Schwarzmüller Alçak Şasi Dorse satın al (6.338)

Durumu: yeni, azami yük ağırlığı: 86.300 kg, toplam ağırlık: 110.000 kg, dingil konfigürasyonu: 3 aks, with hydraulic suspension, BPW axles 12 t, hydromechanical forced steering, single telescopic loading platform type, with 2-piece loading ramps Unladen weight: 23,700 kg Payload: 86,300 kg Length (B): 15,620 - 24,920 mm STZ-L Gooseneck - Front corners chamfered at 45° (468 x 468 mm), closed outer frame - Robust steel and welded construction - Configured loading area: 3,700 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) in a low-profile design (construction height 235 mm) with adjustable guide elements - Ball-race turntable-mounted fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge - Fifth wheel load: 26,000 kg - Steering radius: 2,800 mm - Comfort stowage compartment Loading Platform - Design: "platform, single telescopic" - Traffidecko polymer rubber covering - Loading platform telescope extension constructed as exterior-interior tube design - Locking of extension stages via spring-loaded cylinder and conical bolt - Fixed front support, 700 mm long - Intermediate deck, 300 mm Running Gear - 7-axle chassis with hydraulic suspension, axle spacing 1,510 mm - Axle assembly by BPW, consisting of one non-steered axle and six hydromechanically force-steered steering axles with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Ride height 890 mm, adjustable +170 mm/-90 mm - Chassis with open outer frame Vehicle Rear - Sloped design, 500 mm - 2 integrated drop tube supports for stabilizing the rear during loading 2-piece loading ramps with super grip surface, 50,000 kg capacity - 2,600 + 1,200 x 720 mm - Upright hydraulic lifting system with hand pump, cable extension - Hydraulic ramp adjustment Braking System - Dual-line all-wheel compressed air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake - Hydraulic connection - easyControl system - 3-sided aluminium drop sides - Lift option for 2 axles - Central lubrication system "BEKA-MAX" - Electrical power unit - Extendable widenings including infill boards, widening telescopically up to 3,390 mm Technical Data Gooseneck Loading area (LxW): 3,700 x 2,480 mm Slope: 1,080 mm Build height above fifth wheel: 235 mm Loaded saddle height: 1,300 mm Steering radius rearward: 2,800 mm Steering radius forward: 1,300 mm Kingpin: 3.5" Loading Platform Loading area (LxW): 12,500 x 2,750 mm Telescopically extendable by 9,300 mm Lsdpfx Agoyxcn Io Nohf Stepwise up to (LxW): 21,800 x 2,750 mm Widenable up to 3,390 mm Including rear slope 500 mm Loaded loading height approx. 890 mm Chassis Axle spacing: 6 x 1,510 mm Overhang: 1,100 mm Steering 1st axle not steered 2nd - 7th axle hydromechanically forced-steered (dual-circuit steering)

Durumu: kullanılmış, azami yük ağırlığı: 24.630 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 04/2017, yükleme alanı uzunluğu: 12.640 mm, yükleme alanı genişliği: 2.540 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 2.800 mm, Donanım: ABS, Low-bed trailer 8740 mm, loading height of bed: approx. 1060 mm, gooseneck: 3900 mm, height difference between gooseneck and bed: 580 mm, storage box on gooseneck, continuous stainless steel underfloor/tool box, timber plank floor, 27 lashing rings per side, 9 stake pockets per side, stake storage under the chassis, ramp mounting rail at rear, hydraulic support at the front, separate hydraulic unit, Duo-Matic brake connection, hydraulic quick coupler with 2 connectors, mounting for beacon at the rear, ABS, EBS, BPW Eco axle(s), 2nd and 3rd axles with hydraulic forced steering, drum brake system, air suspension with lifting and lowering function. The vehicle may bear advertising stickers and/or lettering. SI86237 Ljdpjxity Hsfx Ag Nehf Our offer generally does not include a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. The vehicle may bear advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Durumu: yeni, azami yük ağırlığı: 31.400 kg, toplam ağırlık: 45.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.700 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 300 mm, Üretim yılı: 2026, Donanım: ABS, DOLL NEXT Tiefbett tera T2P-S3FS21 – 2-axle low-loader from the rapidly available "rapid" series by DOLL Fahrzeugbau GmbH, based in Oppenau – in the heart of the Black Forest. Ideally suited for demanding operations in tough off-road conditions, challenging terrain, as well as for daily use on construction sites. Depending on current stock, units can be delivered very quickly and are ready for immediate use thanks to DOLL's rapid-series manufacturing. Can be configured individually to meet your specific needs and requirements. Technical Data * Permissible total weight: 45,000 kg * Unladen weight: approx. 13,600 kg – Payload: approx. 31,400 kg * Chassis: 2 x 12 t pendulum axles * Extendable low-bed * Vehicle width: 2,550 mm * Loading height (loaded): 300 mm * Wheelbase: 1,360 mm Features * Removable gooseneck, which significantly simplifies and speeds up loading and unloading * Effortless telescoping for efficient handling * Premium hot-spray galvanizing for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized attachments – robust and durable, no rust Your benefits at a glance * Rapid availability * Robust & reliable – proven technology, ideal even under tough conditions * Made in Germany – manufactured by DOLL Fahrzeugbau, Oppenau, a company with over 145 years of experience in premium vehicle manufacturing Lhodsyytm Ropfx Ag Nef Smart technologies Our innovative approach brings together the highest standards of quality, performance, and cost-effectiveness. The continually rising demand for our low-bed semi-trailers is driving the ongoing advancement of cutting-edge technologies in our series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (headquarters and production site) * Depending on customer location, vehicles can be demonstrated either directly at the factory or on site with selected reference customers throughout Germany by a field sales representative.

Durumu: yeni, azami yük ağırlığı: 44.400 kg, toplam ağırlık: 61.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 7.500 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 300 mm, Üretim yılı: 2026, Donanım: ABS, DOLL NEXT DOLL Tiefbett tera T3P-S3FS25 – 3-axle low-loader from the rapidly available DOLL rapid series, manufactured by DOLL Fahrzeugbau GmbH, Oppenau – in the heart of the Black Forest. Ideally suited for challenging applications in tough off-road environments, difficult terrain, and daily construction site operations. Depending on availability, extremely fast delivery and ready-to-use thanks to DOLL’s rapid series production. Individually configurable based on your specific needs and requirements. Technical Specifications * Gross vehicle weight: 61,000 kg * Curb weight: approx. 16,600 kg – Payload: approx. 44,400 kg * Chassis: 3 x 12 t pendulum axles * Extendable low-bed * Vehicle width: 2,550 mm * Loaded height: 300 mm * Wheelbase: 1,360 mm Lhodoyytnbopfx Ag Njf Features * Removable gooseneck to significantly simplify and speed up loading and unloading * Effortless telescoping for efficient operation * High-quality spray galvanization – optimal corrosion protection, minimizing downtime * Powder-coated and hot-dip galvanized add-on components – robust, durable, rust-free Your advantages at a glance * Rapid availability * Robust & reliable – proven technology, ideal even in the most demanding conditions * Made in Germany – produced by DOLL Fahrzeugbau in Oppenau, a company with over 145 years of expertise in premium vehicle manufacturing Smart technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The steadily increasing demand for our low-bed semi-trailers drives the continuous advancement of state-of-the-art technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Headquarters and main production site) * Depending on customer location, vehicles can be demonstrated directly at the factory or on-site at selected reference customers throughout Germany together with a sales representative.

Durumu: yeni, boş ağırlık: 8.785 kg, toplam ağırlık: 33.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.311 mm, yükleme alanı genişliği: 2.500 mm, toplam uzunluk: 2.600 mm, toplam genişlik: 4.000 mm, toplam yükseklik: 14.000 mm, süspansiyon: hava, lastik boyutu: 385/65 R22.5, Donanım: ABS, | Krone Cool Liner Multitemp derin dondurucu dorse - Yeni araç | Kirişsiz çift kat - Kirişler istek üzerine mevcut | Çiçek genişliği, lift aksı | Disk frenli Krone akslar | Alet kutusu | Stepne tutucu | ThermoKing SLXi soğutucu ünitesi | Lastikler: 385/65 R22.5 | Dizel çalışma saati: 3 saat | Güncel üretimden dorse! Birden fazla mevcut | Hatalar, giriş hataları ve ön satış hakkı saklıdır. Ledpfx Asyi S R Esg Nehf

Durumu: yeni, azami yük ağırlığı: 34.500 kg, toplam ağırlık: 47.000 kg, dingil konfigürasyonu: 2 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 350 mm, Donanım: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – Extendable | 34t Payload | 2 Axles | from €136,900 New vehicle – individually configurable to suit your application. High payload with robust construction and maximum cost-effectiveness. Lhjdpfx Ageypa Ifo Nef --Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg kingpin load • SUPER LOW low bed, extendable with approx. 40 mm hardwood floor • Hydraulically forced-steered pendle axles with axle compensation • Convenient rear-steering control via wired remote • Heavy-duty lashing points for professional cargo securing • Full-length excavator trough for versatile transport tasks --Chassis & Safety • WABCO EBS braking system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • Tires: 245/70 R17.5 • LED lighting system --Construction & Durability • High-strength fine-grained steel construction • Metallized chassis with premium corrosion protection • Multi-layer paint finish for long service life • Cavity sealing with special wax --Included Options • Galvanized front panel + spare wheel • Electro-hydraulic power pack • Prepared for 20'/40' container transport • Load gauge, incl. load diagram • BEKAMAX centralized lubrication system • Extendable warning boards with LED • Beacon mounting bracket --Further equipment options and individual customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Durumu: yeni, azami yük ağırlığı: 39.600 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 860 mm, MAX Trailer Type 100 NEW – Extendable | 39 t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your operational requirements. High payload capacity with robust design for maximum efficiency. ----Highlights: • Approx. 39,600 kg payload • Loading platform: 8,600 mm + extendable by 5,400 mm • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system ----Technical Data: • Gross weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Max. speed: 80 km/h Ljdsypa Npopfx Ag Nehf ----Standard Equipment: • Extendable loading area with robust hardwood floor • Galvanised steel ramps with hydraulic lifting system • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tyre pressure monitoring system (TPMS) ----Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic unit mounted underneath the loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rear beacon mounting bracket • Ramp control valves, right side Further equipment and customisation available at any time – we configure your trailer precisely according to your requirements. Sample photo. Equipment may vary depending on configuration.

Durumu: yeni, azami yük ağırlığı: 39.000 kg, toplam ağırlık: 50.100 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, toplam yükseklik: 860 mm, Donanım: ABS, MAX Trailer Type 110 NEW | Hydraulic Steering - Extendable | 39t Payload | 3 Axles | from €97,400 New vehicle – individually configurable to suit your specific application. High payload with robust design and maximum efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanised steel ramps with hydraulic lifting system (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing Lhsdpfxsypa Rge Ag Nof • WABCO EBS braking system in accordance with EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tyre pressure monitoring system (TPMS) ----Body & Construction • High-strength fine-grain steel construction • Metallised vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate covering over axles for increased durability (Very important for trust.) ----Included Options • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power unit • Rear axle steering, easily operated via cable remote control • Spare wheel with holder • Galvanised folding supports • Telescopic warning signs with LED • Beacon holder • Reflector tape according to EU regulations ----Additional features and customisations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Durumu: yeni, azami yük ağırlığı: 39.500 kg, toplam ağırlık: 48.000 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, toplam yükseklik: 875 mm, Donanım: ABS, Kässbohrer SLS 3 – Rigid Low Loader | from €47,000 New vehicle – individually configurable for your application. The Kässbohrer SLS 3 is a robust, rigid low loader designed for daily use in machinery, construction, and specialist transport. Thanks to its low loading height, high stability, and proven Kässbohrer quality, it impresses with maximum cost efficiency and ease of operation. Attractive entry-level price – ideal as a base vehicle with a wide range of upgrade options. Lhedpfjypa Acjx Ag Njf ----Highlights • Low platform height for easy loading and unloading • Stable S700 MC steel construction • High payload capacity with low unladen weight • Proven Kässbohrer running gear and braking system ----Technical Data • Fifth wheel height: approx. 1,250 mm • Platform length: approx. 9,240 mm • Gooseneck length: approx. 3,950 mm • Platform height: approx. 875 mm • Overall width: 2,550 mm (optionally extendable) • Axles: 3 × BPW air suspension • Axle load: 30,000 kg (3 × 10 t) • Permissible gross weight: • 48,000 kg at 80 km/h • 52,800 kg at 60 km/h • Unladen weight: approx. 8,527 kg ----Standard Equipment • Frame made from high-strength S700 MC steel • 45 mm hardwood flooring on the platform • WABCO EBS braking system 2S/2M with ABS and RSS • Air suspension with load gauge • Mechanical supports at front and rear • High-tensile lashing rings on gooseneck and platform • LED lighting system compliant with ECE R48 • Steel toolbox • Wheel chocks with holders • Spare wheel carrier on front wall ----Included Options • Extendable marker boards incl. LED position lights • Rotating beacon • Rear LED work lights • Rear angle built at 10° • Container locking pockets for 1×20 ft • Side and rear markings according to ECE regulations ----Additional equipment and custom adaptations are available at any time – we configure your vehicle precisely to your requirements. Sample photo. Specifications may vary depending on configuration.

Durumu: kullanılmış, boş ağırlık: 8.550 kg, azami yük ağırlığı: 27.450 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2020, yükleme alanı uzunluğu: 12.800 mm, yükleme alanı genişliği: 2.550 mm, yükleme alanı yüksekliği: 1 mm, süspansiyon: hava, lastik boyutu: 245/70R17,5, renk: gümüş, kilometre: 1.001 km, vites türü: diğer, şoför kabini: diğer, Donanım: ABS, Araç konumu: Bovenden, 3 dingilli, havalı süspansiyonlu, 1. dingil kaldırılabilir, ABS (Anti Blokaj Sistemi), hidrolik rampalar, arka destek, destek ayakları 9 ton dingiller, kampanalı frenler, yükleme yüksekliği yaklaşık 880–950 mm, 3.050 mm'ye kadar genişletilebilir, alçak yatak uzunluğu 8.800 mm, kuğu boynu uzunluğu 4.000 mm, 3 dingilli çekici ile toplam ağırlık 42.000 kg, bu durumda taşıma kapasitesi 31.290 kg. Ljdeyyc Epjpfx Ag Nohf Yedek lastik ek ücret karşılığında temin edilebilir! Aksesuar bilgileri garanti edilmez, değişiklik, ara satış ve hatalar saklıdır!

Durumu: yeni, azami yük ağırlığı: 87.500 kg, toplam ağırlık: 120.000 kg, dingil konfigürasyonu: 3 aks, Type STZ-VP 8 (245) (3+5) with pendulum axles The specified technical data are valid only when using a 4-axle tractor unit with the following parameters: Dimension 'a': 5,400 mm Saddle height (loaded): 1,300 mm Weights at maximum speed 80 km/h Fifth wheel load: 22,000 kg - 30,000 kg Axle load: 8 x 12,000 kg Permissible total weight: 120,000 kg Unladen weight: approx. 32,500 kg Payload: approx. 87,500 kg (depending on load chart / easyLOAD calculation) Dimensions: Dimension 'b': 21,990 mm - 26,490 mm, overall train length Vehicle width: 2,750 - 3,000 mm Gooseneck: Length x width: 3,700 mm x 2,480 mm Saddle height (loaded): 1,300 mm Articulation radius front/rear: 1,370 mm / 2,835 mm King pin: 3.5'' Front 3-axle chassis: Wheelbase: 2 x 1,510 mm Single tires, Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: countersteered Excavator deck: Single telescopic Length x width: 7,000 mm x 3,000 mm Telescopically extendable by / to max. 4,500 mm / 11,500 mm Construction height: 450 mm Loading height (loaded): approx. 600 mm at 150 mm ground clearance Stick width: 1,350 mm Mattresses and booms removable Rear 5-axle chassis: Wheelbase: 4 x 1,510 mm Single tires, Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering axle arrangement: forced-steered Radio remote control Lsdjwc Inhspfx Ag Nehf

Durumu: kullanılmış, toplam ağırlık: 50.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 12/2022, yükleme alanı uzunluğu: 12.400 mm, yükleme alanı genişliği: 2.550 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2022, Donanım: ABS, 4-axle low-bed semi-trailer with stepped platform Tractor unit data and equipment: 3-axle tractor unit Lsdpfx Agsu Uzv Es Nohf Please check the saddle height under the section "Dimensions"! No modifications to the tractor unit Please note: 5,000 mm = maximum distance from front edge of the tractor unit to center of the fifth wheel 1,730 mm = minimum front clearance from center of the fifth wheel 2,230 mm = maximum rear swing radius Tractor unit suspension type: Air suspension Gross train weight (permissible) 40 t Gross weight (technical) 58 t Axle assembly load (technical) 40 t Fifth wheel load (technical) 18 t Front stepped platform: 3,500 mm Low-bed platform - level loading area: approx. 7,970 mm Rear ramp slope: approx. 730 mm Overall width: approx. 2,550 mm (with extensions approx. 3,000 mm) Loaded loading height: approx. 870 mm Unloaded loading height: approx. 900 mm With unloaded saddle height: approx. 1,250 mm When combining vehicles, ensure compliance with legally permissible overall height and total train length! Steel welded construction with a front, sloped frame cranking and beveled rear (without central excavator shovel recess) 5 pairs of pockets in the low-bed for tube stanchions 100 x 50 mm 4 pairs of lashing brackets in the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t-floor lashings on the stepped platform 7 pairs of recessed, retractable 5t-floor lashings (10t technical pulling force) in the low-bed + 1 foldable pair between the 2nd and 3rd axle 1 pair of recessed, retractable 10t-floor lashings on the front platform slope 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the 2nd axle 1 pair of recessed, foldable 10t-floor lashings on the inner longitudinal beam past the front crank Interchangeable 2" kingpin 5 pairs of steel tubular side stakes 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, securing with pressure actuation # Permissible stanchion load 1,000 kg/stanchion with application point 500 mm above ground Pull-out platform extensions on both sides of the low-bed with 50 mm softwood planks (the track width of the machines to be transported must not exceed the external frame width of 2,550 mm) Mechanical steel landing gears, 2 x 12 t, single-side operation right, automatic load equalization, manufacturer according to factory selection 2 pieces hydraulic supports at the rear - individually operable, control housed in its own stainless steel box AF air-suspended low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as spindle/pivot steered SAF trailing axles, approx. 20° steering angle, electro-pneumatic reverse lock automatically activated in reverse gear, in addition with a switch in the driver's cab and release valve on the trailer Starting aid on 1st axle = speed-limited pressure relief, can be unloaded when loaded, push button operation in cab Mechanical odometer, mounted on 2nd axle, right-hand side in direction of travel 16 x tires 245/70 R 17.5, 146/146F (tire load capacity 12 t / axle) 16 x steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12 t/axle) 1 x tire 245/70 R 17.5, 146/146F, brand Conti HTR2 (tire load capacity 12 t/axle) 1 x steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT - Schwarzmüller Intelligent Telematics, service package "LOCAL TRAC" ... further details on

Durumu: onarım gereklidir (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: W09STR3489SM39249, azami yük ağırlığı: 28.050 kg, dingil konfigürasyonu: 3 dingil, izin verilen dingil yükü (dingil 1): 8.000 kg, izin verilen dingil yükü (dingil 2): 8.000 kg, izin verilen aks yükü (aks 3): 8.000 kg, ilk tescil: 10/2009, bir sonraki muayene (TÜV): 12/2025, yükleme alanı uzunluğu: 13.530 mm, yükleme alanı genişliği: 2.530 mm, Üretim yılı: 2009, SAF kampanal freni 245/70 R17,5 Takip eden yönlenebilir dingil Havalı süspansiyon Alçak yatak 9550 mm uzunluğunda Alçak yatak yükseklik 880 mm Yüksek yatak 3980 mm uzunluğunda 4 çift takma dikme Takma dikmeler için 28 farklı cep 13 çift yük sabitleme halkası Lsdpfx Asywy Ebeg Nshf 8 çift ağır yük sabitleme halkası Muayene süresi geçmiş

Durumu: kullanılmış, boş ağırlık: 10.660 kg, azami yük ağırlığı: 37.340 kg, toplam ağırlık: 48.000 kg, ilk tescil: 03/1992, süspansiyon: diğer, lastik boyutu: 215/75 R17.5 141/140 J, azami hız: 80 km/s, renk: kırmızı, vites türü: diğer, ön lastik ölçüsü: 215/75 R17.5 141/140 J, arka lastik boyutu: 215/75 R17.5 141/140 J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, immobilizer sistemi, merkezi kilitleme, Satış için iletişim kişileriniz: Frank Rau / Rusça / İngilizce / Almanca - Bachar Ibrahim / Arapça / İngilizce / Almanca - Kayıt servisi, HU/SP/UVV, limana nakliye Ana renk: kırmızı Donanımda ekstralar ABS, sürüşe hazır, havalı süspansiyon, fiyat sorunuz (Mobile), video, immobilizer, merkezi kilit, taşıma kapasitesi (kg): 37340 Lhodoxqav Djpfx Ag Nef Üst yapı tipi: Nooteboom OSD-48-03 V/L düşük şasi treyler, 3000 mm genişletilebilir yüzeyler, uzatılabilir, HSN/TSN: Hatalar olabilir.

Durumu: kullanılmış, azami yük ağırlığı: 33.525 kg, toplam ağırlık: 46.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 04/2008, Üretim yılı: 2008, Donanım: ABS, Üretici: Kel-Berg / Faymonville Model: 4 dingilli, 3 m uzatmalı makina römorku Yıl: 2008 Durum: İyi Şasi Numarası: SKBE58S407KE12547 Referans no: 7972 Lhsdpfx Ajxa Tdmjg Njf Kayıt tarihi: 30-04-2008 Son kontrol: 27-01-2025 Kampana fren: ? ABS: ? Arka dingiller: SO F Süspansiyon: Havalı Lastik ölçüsü: 235/75R17,5 Diş derinliği %30-50 Alet kutusu: ? Toplam ağırlık: 46.000 kg Boş ağırlık: 12.575 kg Yük kapasitesi: 33.425 kg Dahili uzunluk: 8,75 m / 12,10 m Uzama: 3 m Mecburi yönlendirmeli dingiller: 3+4 Hidrolik rampalar: ? Hidrolik arka destek ayağı: ?

Durumu: kullanılmış, azami yük ağırlığı: 24.240 kg, toplam ağırlık: 36.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 12/1999, Donanım: ABS, Vehicle identification no.: W09FST236XSR14889 First registration: 08.12.1999 German TÜV (roadworthiness inspection) due Unladen weight: 9,760 kg Overall length: 15,400 mm Gooseneck: 3,800 mm – Kingpin 2" – Fifth wheel height: approx. 1,350 – 1,400 mm Lowbed length: 8,250 mm – Loading height 300 / 670 mm Lodpfxst Rcnio Ag Nohf Chassis frame: 3,100 mm – Loading height 1,000 mm Spring-loaded ramps – Length 2,400 mm – Width 600 mm Gigant axles with drum brakes 2 x forced-steered axles Axle loads: 2 x 10,000 kg Tyres: 235/75 R 17.5 Subject to change, prior sale, and errors excepted. The description serves for general identification of the vehicle and does not represent a guaranteed property in the legal sense of sales law. The description in the purchase contract is binding. Our offer does not include a new TÜV approval as standard. Should you require a new TÜV approval, we will be happy to provide you with an offer from our partner workshops! Vehicle may have advertising decals and/or signage. Our general terms and conditions of delivery and payment apply.

Durumu: kullanılmış, azami yük ağırlığı: 46.600 kg, toplam ağırlık: 64.000 kg, ilk tescil: 04/2009, bir sonraki muayene (TÜV): 11/2026, yükleme alanı uzunluğu: 13.730 mm, yükleme alanı genişliği: 2.750 mm, Donanım: ABS, * ABS * Yönlendirici aks * Turuncu tepe lambası * BPW-ECO akslar * 5 odacıklı arka lambalar ----Üst yapı: Derin yataklı alçak dorse (8000mm/derin yatak + 5730mm/şasi), derin yatakta yükseklik yaklaşık 550 mm (yüklemede), kaz boynu ayrılabilir (önden üzerinden geçilebilir), kaz boynu üzerindeki yük platformu (3750x2480x300mm), 4x yönlendirici aks ve uzaktan kumandalı yardımcı yönlendirme, derin yatak 3.190mm'ye kadar genişletilebilir, sert ağaç/çelik taban, bağlama halkaları. Lodpsyu Htxefx Ag Njhf Satış sadece ticari müşterilere yöneliktir. İHRACATTA YALNIZCA NET FİYAT ÖDENİR !!!!! TÜM BİLGİLER, ÖZELLİKLER VE AKSESUARLAR GARANTİSİZ VERİLMİŞTİR. Tüm satış sözleşmeleri, faturalar, proforma faturalar, siparişler ve satış görüşmelerinin temeli genel satış şartlarımızdır (bkz. künyemiz).

Durumu: kullanılmış, azami yük ağırlığı: 28.020 kg, toplam ağırlık: 38.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 03/2018, bir sonraki muayene (TÜV): 04/2028, Üretim yılı: 2018, Dahili araç no.: VTC30021 Lsdpfx Aoywqlfjg Nehf Alman aracı Kaufungen - Kassel, Almanya’daki tesisimizde, hemen teslim Daha fazla bilgi için: * Luis Lucena (Almanca, İngilizce, İspanyolca, Fransızca) * Viktoria Sologubova (Lehçe, Rusça, Ukraynaca, İngilizce) Finansman örneği: * Dahili numara: VTC * Satış fiyatı: 38.900,00 € * Peşinat: %10 * Vade: 60 ay * Aylık ödeme: 600,02 € * Son değer: 7.380,00 € Teklifimiz sizin için uygunsa veya ihtiyaçlarınıza göre uyarlamak isterseniz, lütfen bizimle iletişime geçin (Sn. Enchev). Aramanızı bekliyoruz. Hatalar ve değişiklikler saklıdır. Kullanılmış aracınızı takas olarak kabul ediyoruz. Finansman doğrudan firmamızda mümkündür. GOLEC NUTZFAHRZEUGE GMBH Konuştuğumuz diller: Almanca, İngilizce, İspanyolca, Lehçe, Ukraynaca, Rusça, Bulgarca.

Durumu: kullanılmış, azami yük ağırlığı: 18.000 kg, toplam ağırlık: 24.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 03/1987, yükleme alanı uzunluğu: 12.340 mm, yükleme alanı genişliği: 2.620 mm, toplam genişlik: 2.750 mm, toplam yükseklik: 1.450 mm, Düşük Yatak: Toplam uzunluk - 8.530 mm, 1. aksa kadar uzunluk - 4.360 mm, yükseklik - 690 mm, iki aks arasındaki uzunluk - 1.800 mm, yükseklik: 900 mm, aksların arkasındaki uzunluk - 2.130 mm, rampa yüksekliği - 830 mm, ön eğim 240 mm, genişlik: 2.620 mm, kuğu boynu: 3.900 mm, beygir başı yüksekliği 1.180 mm, king pinin öne konumu: 1.150 mm, Alüminyum rampa (UxG) 2.880x500 mm, her iki tarafta 4 adet ağır yük sabitleme halkası, JOST destek ayakları, SAF aks(lar), kampanalı fren sistemi, yaprak süspansiyon. Araç reklamla kaplanmış ve/veya yazılandırılmış olabilir. Ljdpfoyqdguox Ag Njhf Teklifimiz genel olarak yeni TÜV onayı olmaksızın geçerlidir. Yeni bir TÜV onayı istenirse, partner atölyelerimizin teklifini memnuniyetle sunarız! Araç reklamla kaplanmış ve/veya yazılandırılmış olabilir. Genel teslimat ve ödeme şartlarımız geçerlidir. Bu nesne için finansman veya leasing teklifi sunuyoruz. Lütfen bizimle iletişime geçin!

Durumu: kullanılmış, boş ağırlık: 15.800 kg, azami yük ağırlığı: 38.200 kg, toplam ağırlık: 54.000 kg, ilk tescil: 07/2002, bir sonraki muayene (TÜV): 02/2025, yükleme alanı uzunluğu: 6.800 mm, yükleme alanı genişliği: 2.750 mm, süspansiyon: hava, lastik boyutu: 235/75R17.5, renk: kırmızı, vites türü: diğer, ön lastik ölçüsü: 235/75R17.5, arka lastik boyutu: 235/75R17.5, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Satış irtibat kişisi: Frank Rau / Rusça / İngilizce / Almanca - Lhedoww D Igepfx Ag Nsf Bachar Ibrahim / Arapça / İngilizce / Almanca - Tescil hizmeti, muayene/güvenlik kontrolü/kaza sigortası, limana teslim Ana renk: kırmızı Donanım ekstraları ABS, EBS, kullanıma hazır, hava süspansiyonu, fiyat talep üzerine (mobile), süspansiyon: hava, taşıma kapasitesi (kg):38200 Üst yapı tipi: Goldhofer alçak şasi, 3 dingil zorunlu yönlendirmeli, radyo kumandalı FB direksiyon, alçak yatak 6800 mm, normal durum, HSN/TSN: 6631/000 Hatalar olabilir.

Durumu: yeni, toplam ağırlık: 36.000 kg, yükleme alanı uzunluğu: 13.300 mm, yükleme alanı genişliği: 1.640 mm, yükleme alanı yüksekliği: 3.770 mm, Üretim yılı: 2026, Donanım: ABS, Forklift taşımacılığı için özel araç. Yaklaşık 3.770 mm azami iç yükseklik için iç yükleyici / ara yükleyici Teklif fiyatı opsiyonel donanım hariçtir. Mevcut donanım: Ljdpfxsvw Hm Te Ag Njhf Rampalarda yükleme ve boşaltma için uygun, arka kısımda yük asansörü / asansör. Araç üretim aşamasında olup teslimat süresi bulunmaktadır. Talep üzerine istenilen donanımla birlikte tekliflerimizi memnuniyetle sunarız. Daha fazla bilgi için: veya bizi arayın.

Durumu: kullanılmış, toplam ağırlık: 37.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 04/2018, bir sonraki muayene (TÜV): 07/2026, Üretim yılı: 2018, Donanım: ABS, * Doll Fahrzeugbau 2 akslı ormancı makinesi lowbed, Tip T2H-0L * Havalı süspansiyon * Hidrolik kontrollü akslar Lhsdpfxsyxb Tvs Ag Nsf * Uzaktan kumanda * Toplam uzunluk 16,70 m * Alçak yatak uzunluğu 9,50 m * Genişlik 2,55 m * Toplam ağırlık 37.000 kg (teknik olarak mümkün 39.000 kg) * Boş ağırlık 10.360 kg * Taşıma kapasitesi 27.640 kg * Lastik ebadı 235/75 R17,5 * Çift tekerlek * Rampalar * BPW akslar Muayene tarihli/SP 01/2027

Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WLAST300000A72224, boş ağırlık: 13.880 kg, ilk tescil: 08/2023, bir sonraki muayene (TÜV): 12/2026, toplam uzunluk: 17.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 3.750 mm, Üretim yılı: 2023, LANGENDORF low-bed semi-trailer with wheel recesses in drive-over design, type SATÜV 30 – 8,900 mm + 4,200 mm extendable, suitable for a 6x4 three-axle tractor unit, wheelbase 3,300 mm, 'A' dimension max. 5,000 mm. Rear loading ramps: L x W 2,950 + 1,700 x 700 mm, automatically spreading. Permissible total trailer weight: 48,000 kg Permissible fifth-wheel load: approx. 18,000 kg Permissible trailer axle load: 30,000 kg Tare weight: approx. 14,000 kg Payload with uneven load distribution: approx. 34,000 kg Total train weight as per German road traffic regulations (StVZO): 40,000 kg Tractor tare weight (depending on type): approx. 9,500 kg Low-bed trailer tare weight: approx. 14,000 kg Payload as per StVZO: approx. 16,500 kg Total train weight with exemption certificate in accordance with § 29: 41,800 kg Tractor tare weight (depending on type): approx. 9,500 kg Low-bed trailer tare weight: approx. 14,000 kg Payload with exemption cert. as per § 29 (indivisible load): approx. 18,300 kg Total train weight with exemption certificate in accordance with § 70: 56,000 kg Tractor tare weight (depending on type): approx. 9,500 kg Low-bed trailer tare weight: approx. 14,000 kg Payload with exemption cert. as per § 70 (indivisible load): approx. 32,500 kg Dimensions: King pin to end of vehicle: approx. 11,500 mm Loading length including 600 mm ramp slope: 8,900 mm, extendable by 4,200 mm to 13,100 mm Platform length: 3,500 mm Lhjdpfxsywniue Ag Nef Loading width: 2,550 mm Loaded bed height at maximum capacity (incl. 10 mm wooden floor overhang): approx. 910 mm Axle spacing: 2,260 mm – 1,410 mm Saddle height when loaded: 1,250 mm

Durumu: kullanılmış, boş ağırlık: 13.200 kg, azami yük ağırlığı: 52.800 kg, toplam ağırlık: 66.000 kg, dingil konfigürasyonu: 3 aks, ilk tescil: 06/2025, yükleme alanı uzunluğu: 9.300 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 245/70 R 17,5, renk: gri, Üretim yılı: 2025, Donanım: ABS, For every used semi-trailer, you will receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading platform: - Extendable loading platform with rear bevel of approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tensioning straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over-axle areas with checker plate covering Axles and tyres: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically steered - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - Tyres: 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Ljdpfxjyffd Ds Ag Nshf Two-piece steel ramps: - One pair of galvanised two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp parts, hydraulic lifting system and hydraulically adjustable positioning - Maximum load per pair: 40,000 kg Accessories included: - 2" king pin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised connection strip at the front - 4 wheel chocks - One spare wheel - Electro-hydraulic power pack - Remote steering from front and rear, operated via cable remote control with push-buttons, including single-track monitoring for axles - Mounting provision at rear of gooseneck for ALU approach ramps - European reflective signs (red-yellow) at rear of trailer - White reflective tape according to EU regulations at the sides, at the extension, and red at the rear - On the gooseneck and ramps, left and right, a bracket for warning signs including socket - One mount for a revolving beacon at the rear of the trailer - Galvanised folding supports under the platform’s rear slope - Control valves for the ramps mounted on the right side of the trailer - Cover plates to bridge the gap between ramps and platform - Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm - Rear galvanised stub posts are removable (body length approx. 2,560 mm) - One INOX toolbox 1,350x400x400 on the gooseneck, box covers oil filler cap - 4 pairs WADER container locks in the loading area for one 20ft, two 20ft, 40ft or one 45ft container - 7 pairs of stake pockets (100 x 50 mm) in the outer frame of the loading platform - Galvanised platform extensions, extendable approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading platform slope - Lift axle at the front axle with control by TEBS E, depending on axle load and current load condition - Four extendable warning signs approx. 423 x 423 mm extendable by approx. 400 mm, with position light - Radio remote control for remote steering in addition to cable remote, with status lights on receiver for single-track monitoring - Painted sand coating for anti-slip protection on the checker plates on the gooseneck and platform - 80 km/h speed stickers at the rear and on both sides

Durumu: yeni, boş ağırlık: 9.300 kg, azami yük ağırlığı: 30.100 kg, toplam ağırlık: 39.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 8.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 860 mm, süspansiyon: hava, lastik boyutu: 235/75 R17.5, Donanım: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable loading area: Lhjdoyxc Eyopfx Ag Nsf - Loading area in extendable design with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding lashing rings to the outside (LC 5,000 daN) - 3 pairs of folding lashing rings to the outside (LC 10,000 daN) - 1 pair of flat lashing rings in the front of the loading area (LC 10,000 daN) - Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick; chequer plate flooring over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lift capacity (50t test load) Axles and tires: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tire pressure monitoring system according to ECE R 141 - Tires 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow and red air couplings on the galvanized front connector rail - 2 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Rear axle steering operable from front and rear via cable remote control with push buttons, including single-track axle alignment control - European reflector panels (red-yellow) at the trailer rear - White reflective tape according to EU regulations on the sides and extension, rear in red - On the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket - Movable mounting rail for ALU approach ramps at the rear of the vehicle - A bracket for a beacon at the rear of the trailer - Galvanized folding supports under the loading area’s bevel - One mud flap at the rear of the trailer - Operating manual and description on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable cover around the pump - Plug-in ALU side walls and tailboard on the gooseneck, approx. 2,440 x 400 mm - The rear, galvanized plug-in stanchions are removable (structure length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the external frame of the loading area - One INOX toolbox 1,500 x 390 x 810 under the loading area, right side in driving direction - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm each with a position lamp - Beacon bracket on the warning signs - Radio remote control for rear axle steering, in addition to cable control, with indicator lights on the receiver for single-track alignment check - Sand-coated anti-slip layer painted on chequer plates on the gooseneck and loading area - 80 km/h speed stickers on the rear and both sides - Load manometer for determining axle loads, including a load chart