Kullanılmış Müller-Mitteltal Etue-Ta 10, Ex Bundeswehr, Wenig Benutzt Top satın al (28.837)

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection Dsdpjx Dp Agjfx Addeut ----Axle: * 2 x SAF axles, rated at required tonnage * First axle configured as a lift axle (fully automatic) * Lift axle with ride height +30 mm via control cylinder * Start-assist function for maneuvering and forced lowering to the first axle — switchable via speed-dependent EBS electronic system (no installation required on the truck side, with additional cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering via radio remote control ----Drawbar / Flange Towing Eye: * 50 mm bolted flange towing eye — height-adjustable by +77 mm and -33 mm — for 2 t support load ----Electric / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, actuated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12V + 24V via tail light circuit ----General Attachments: * BPW support winch at the front * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access ladder in front of the bulkhead, left side (direction of travel) * Shovel and broom holder in front of the bulkhead * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm, mounted laterally on the right * Enclosed side impact protection, usable as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right, direction of travel) with remote control operation ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Main frame constructed from high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift operation controlled by radio remote * Remote with fast function for unloading, but not for loading * Emergency stop switches on both left and right sides * Container supports: 4 lateral supports per side and 1 rear roller each side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 mechanical drop supports at the rear * Approval for 20 tonnes gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is removed from its charging station, the service brake must be applied to enable radio operation. Brake connections must remain connected at all times to allow electro-hydraulic/pneumatic valves to open * Monitoring system for underride guard to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, step, underride protection, and support legs hot-dip galvanized * Axles, air tank, and front support winch painted in black * Palfinger hooklift painted in black / yellow ----Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is available immediately

Koşul: ikinci el, azami yük ağırlığı: 14.300 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/2023, bir sonraki muayene (TÜV): 11/2026, Üretim yılı: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles, rated for high load * First axle configured as lift axle (fully automatic) * Lift axle travel height +30 mm via height-adjustment cylinder * Start-assist function for maneuvering and forced lowering to first axle – activated through speed-dependent EBS electronic module (no installation required on towing vehicle, includes additional cable for in-cab operation from tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flanged Eye: * 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, activated via reverse gear * EBS multi-voltage system, compatible with towing vehicles fitted with 12V & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light circuit ----General Equipment: * BPW manual landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel guards * Double access step, front left of the bulkhead * Shovel and broom holder in front of the bulkhead Dusdjx Dp Amjpfx Addst * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, mounted right-hand side * Enclosed side underrun protection, suitable for use as advertising space ----Hydraulics: * Dual-circuit hydraulic couplings (vehicle/tractor side) rated for 180 bar (tractor operation) * Double-acting hydraulic control circuit for rear tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed from high-tensile fine-grained steel * 20,000 kg traction force * Hook height: 1,570 mm * Hooklift controls via radio remote * Quick function available for discharging, not for loading * Emergency stop button on both left and right sides * Container mounts: each side with 4 supports plus 1 rear roller each * Hydraulically operated rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at rear * Homologated for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied to enable radio operation. Brake couplings must remain connected to allow operation of the hydraulic/pneumatic control valves * Monitoring system ensuring underrun protection is retracted before tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop supports hot-dip galvanized * Axles, air reservoirs, and front landing gear painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Information: * Mounting brackets for hook s

Koşul: ikinci el, azami yük ağırlığı: 4.500 kg, toplam ağırlık: 6.500 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 07/1979, bir sonraki muayene (TÜV): 04/2026, yükleme alanı uzunluğu: 4.000 mm, yükleme alanı genişliği: 1.900 mm, yükleme alanı yüksekliği: 380 mm, toplam genişlik: 2.500 mm, toplam yükseklik: 3.000 mm, Üretim yılı: 1979,

Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Braking System: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted towing eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-shield ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made from 50 mm softwood * 1 sliding plate 750 x 1,000 mm positioned at the front, incl. 2 moveable trough stops at the front (plug-in, 2 positions each) * Rear crossmember suitable for use with aluminum approach ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unladen loading edge approx. 710 mm ----Load Securing: * 4 repositionable trough stops, can be plugged into 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV tie-down point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with equalizing chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoir painted in black Duedpfx Asl Th Eyjddot ----General Information: * The vehicle has a day registration from 06/2024, has not been in use or loaded due to the absence of a tire pressure monitoring system * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf on the A7

Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, front right side of chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks in the positions of the central locking mechanism plus 2 on the front bulkhead * Chassis made from fine-grained steel * Steel pallet 3-way tipper superstructure, continuous side panels with internal tube reinforcement – without intermediate posts, folding with drop-side spring lift * Removable bolted rear stanchions * Combined steel double-wing rear doors, asymmetrically split, can swing and lock up to 270° – not foldable – with additional swinging frame for automatic tailgate opening during tipping, locking via galvanized rotary latch at the rear and central locking, deactivation function for automatic tailgate operation when tipping backwards with open door Duedpfx Adel Th Htedot * Each corner with 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes integrated in the outer frame on each side * 4 mm steel floor plate (fine grain steel) * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable rear compartment under the loading deck, built into the chassis for the ramps * Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing gear painted in black tone * Tires 285/70 R19.5 * Side board paintwork RAL 9010 pure white * Side wall paintwork available in RAL color of choice at additional cost * Vehicle is registered for one-day registration (never used) * Subject to errors and prior sale * Available immediately ex Egestorf

Koşul: ikinci el, azami yük ağırlığı: 12.080 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2024, yükleme alanı uzunluğu: 3.900 mm, yükleme alanı genişliği: 1.920 mm, yükleme alanı yüksekliği: 415 mm, Üretim yılı: 2022, Donanım: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Tow Bar / Flange Drawbar Eye: * Height-adjustable tow bar (+/- 150 mm) * 40 mm bolted drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Foldable rear A-plate ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding sheet metal plate 750 x 1,000 mm at the front, including 2 removable trough stops at the front, insertable in 2 positions * Rear traverse for mounting aluminum loading ramps, including 2 additional rear drop stands ----Loading Edge: * Unladen loading height approx. 710 mm ----Load Securing: * 4 repositionable trough stops, insertable in 2 positions for lateral centering of the troughs * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, tow bar, and rear drop stands hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black Dedpfel Th Dmox Addeut ----General Information: * Vehicle has a one-day registration in 06/2024 due to missing tire pressure monitoring system, and has not been loaded or used * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Koşul: ikinci el, azami yük ağırlığı: 10.870 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 06/2025, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2023, Donanım: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm, with 40 mm flanged towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the right side at the front of the chassis * 15-pin electrical connector * Multi-chamber tail lights Dodpfx Asl Th Duoddsut * Screw-fastened underrun protection * Plastic quarter fenders * Net hooks located at the central locking housing and 2 pieces on the front wall * Chassis made of high-tensile fine-grain steel * Steel pallet tri-sided tipping body with continuous side walls reinforced at the top with internal pipes, without middle stakes, foldable with drop-side spring cylinders * Bolted rear stanchions * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270° (non-drop-down), with additional swing frame for automatic tailgate opening when tipping, rear locking by galvanized rotary latch and central locking, deactivation function for automatic tailgate when tipping backwards with opened wing doors * 1 x 5 t lashing ring in each corner, plus 4 x 3 t lashing points recessed in the outer frame on each side * 4 mm steel floor made from high-tensile fine-grain steel * Rear mounting rail for loading ramps * Reinforced superstructure with cargo securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t / pair), suitable for rubber-tired & tracked vehicles * Lockable compartment for ramps, accessible from the rear and recessed under the loading area in the chassis * Chassis, drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Tyres 285/70 R19.5 * Body painted RAL 9010 pure white * Side walls can be painted in any RAL color for an extra charge * Vehicle comes with day registration (without actual use) * Errors and prior sale reserved * Immediately available ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Braking System: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange eye ----Lighting / Electrics: Dsdpforvvflsx Addout * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing leg at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox front right, exterior of the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Side panels made from trapezoidal profile steel plate, foldable with sideboard assist spring * Rear wall made of steel, can be inserted between the ramps (bracket for storage provided inside in front of the bulkhead when not in use) * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity at 480 mm intervals * Optionally, installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each corner at the front and rear * Various bores in front and end crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical steel mesh ramps with spring-assist, suitable for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, loading ramps, and rear wall * Sideboard color RAL 9010 pure white * Side panel paintwork in any RAL color available for an additional charge ----Information: * -- Reinforced and certified body according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 08/2026

Koşul: yeni, azami yük ağırlığı: 10.760 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring actuators ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange drawbar eye Dujdjq Dyvvepfx Addjt ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down trapezoidal-profiled steel side walls with drop side spring assist * Steel rear wall, can be slid in between the ramps—holder for storage inside the bulkhead when not in use * Bolted rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear entry ramp angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps and rear wall * Drop side color in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, 300 mm range, with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at the front * Rear: 2 mechanical folding supports * Plastic toolbox, approx. 750 x 350 x 300 mm, right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of high-strength fine-grain steel ----Tipping Body: * Net hooks on the sides and rear in the central locking mounts plus 2 pieces on the front wall * 2-way pallet steel tipper body, fixed front wall of smooth sheet, continuous drop sides (without center stanchions, fold-down with sideboard spring assist) and swinging via manual central locking * Rear stanchions bolted * Steel rear wall inserted in front of the ramps * 1 x 5 t lashing point in each corner and 4 x 3 t lashing rings each side, recessed in the outer frame * 4 mm fine-grain steel floor ----Ramps: Dodpfx Adstr Sucedjut * Two-part mechanical steel grid access ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (can be manually telescoped to 80 mm overlap) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Drop sides and platform painted RAL 9010 pure white * Side wall and tipping body paintwork in any RAL color available at extra charge ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 07/2026

Koşul: yeni, azami yük ağırlığı: 10.400 kg, toplam ağırlık: 14.400 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.500 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release mechanism for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / flange eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring system with readout in truck via EBS signal, no installation required on truck side * 15-pin power connector * LED tail lights ----General accessories: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis frame: * Main frame made of high-tensile fine-grained steel ----Tipper body: * Mesh hooks on the sides and rear at the central locking bearings, plus 2 hooks at the front wall * Steel pallet - 2-way tipper body with fixed steel front wall, continuous smooth steel side walls, folding without center stanchions using drop-side spring lifters, also swinging via manual central locking * Rear stanchions bolted * Steel rear panel slid in front of the ramps * 1 x 5 t lashing point in each corner, 4 x 3 t lashing rings recessed per side in the outer frame * 4 mm floor made of fine-grained steel ----Ramps: * Two-part mechanical grating ramps with aluminium nose sections, 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and support winch painted in black tone * Sideboards and tipper body finished in RAL 9010 pure white * Optional: painting of side walls and tipper body in any RAL color available at additional cost ----Additional information: Dusdetr St Uopfx Addst * New vehicle with manufacturer’s warranty * Subject to prior sale and errors ----Delivery time: * Available from week 07/2026

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system (TPMS) * Emergency release device for spring-actuated cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering device * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm by offset plate * Jost landing gear at front * External folding supports at rear * Plastic toolbox, approx. 750 x 350 x 300 mm, on right side * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped design * Preparation in front of bulkhead for retrofitting container locks * Bolted front wall made of smooth panel * Split side walls made of trapezoidal-profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, can be slid in between ramps—bracket for stowage when not in use, mounted inside front wall Dodpjmi Tmasfx Addjut * Rear stakes bolted * Perforated outer frame, approx. 45° bent with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Lashing package: in each corner front and rear 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in front and rear cross beam for 1.2 t lashing possibilities * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 14.400 kg, toplam ağırlık: 19.000 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Tow bar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection Duedpfxomi Tcqj Addet * Plastic quarter mudguards * 15-pin electrical socket * Multi-chamber tail lights * Reinforcement package on chassis for drill rig transport * 50 mm softwood floor in clamped version * Pre-fitted equipment for retrofitting container locks in front of bulkhead * Bolt-on bulkhead made of smooth sheet metal * Split side walls, steel sheet - trapezoidal profile - foldable with central folding stake * Rear wall, steel, slide-in type between ramps - bracket for storage in front of bulkhead when not in use * Rear stakes bolted * Perforated outer frame approx. 45° angle, with 2 t lashing capacity every 480 mm * Option to install 3 t drop-forged lashing rings every 600 mm * Load securing package (Lasi): front and rear corners each equipped with 1 x 10 t UVV lashing ring, sides each with 2 x 8 t UVV retractable lashing rings in outer frame, multiple holes in bulkhead and end crossmember for 1.2 t lashing points * One-piece slide-in ramps, 12 t / pair, ramps approx. 2,750 x 620 mm * Rear access ramp approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flange eye and landing gear painted in black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Towing Eye / Flange Tow Eye: * Towing bar adjustable in height by 300 mm * 40 mm flange tow eye ----General Attachments: * Jost landing gear front * Exterior folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood floor * Bolted front wall made of smooth sheet metal * Drop sides made of trapezoidal-profiled steel, foldable with drop side spring assist * Steel rear wall, slide-in panel between ramp holders - stowed in front of the front wall when not in use Duodpfx Ajl Th Nreddjt * Rear stakes bolted ----Load Securing: * Perforated outer frame, angled approx. 45 degrees with 2 t lashing capacity at 480 mm intervals * Option to equip with 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Approach slope at the rear approx. 860 mm chassis height ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tanks, 40 mm flange tow eye painted in black * Sideboard painted RAL2011 deep orange * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit Dujdpfx Adjl Thy Rsdst ----Drawbar / Towing Eye: * Drawbar with 300 mm adjustable height * 40 mm flanged towing eye ----General Attachments: * Jost mechanical landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet steel front wall * Drop sides made of trapezoidal steel sheet, foldable, with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated external frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Option to install 3 t swing lashing rings every 600 mm (5 lashing rings mounted on each side) * One 6.3 t lashing ring in each of the four corners front and rear * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access, storage compartment below loading platform integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall * Dropside colour in RAL 9010 pure white * Painting of sidewalls in an RAL colour at additional cost possible ----Information: * New vehicle, unregistered * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.800 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.370 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release system for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, 300 mm range * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External foldable support legs at the rear * Plastic toolbox, front right, mounted externally on the front bulkhead * Side underrun protection * Plastic quarter mudguards Dedpfsl Th Ncox Addeut ----Electrics / Lighting: * RDÜ (tyre pressure monitoring) * LED lighting ----Loading Platform: * Loading length 5.37 m * 50 mm softwood floor * Bolted front bulkhead made of smooth sheet steel * Drop sides made of trapezoidal profiled steel, foldable, with drop side spring assist * Rear wall made of steel, can be slid between the ramp holders forward of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical steel grating ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm chassis height ----Tyres: * 235/75 R 17.5 tyres ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tail gate, support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Drop sides painted in RAL2011 deep orange * Sides can be painted in any RAL color at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex works Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic brake system (EBS) Duedpfol Tilxex Addst * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assembly ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted exterior on bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Cargo Area: * 50 mm softwood floor * 20" container locks, mounted at front and rear * Bolted smooth sheet steel bulkhead * Drop-down trapezoidal profile steel side walls with spring-assisted wall lifters * Bolted, hot-dip galvanized rear stakes ----Load Securing: * Perforated outer frame, bent at approx. 45°, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing brackets every 600 mm (5 lashing rings fitted on each side) * 1 x 6.3 t lashing ring at each front and rear corner * Various boreholes in the bulkhead and rear cross-member for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-accessed storage compartment for ramps, integrated under the loading area within the chassis ----Paint / Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Drop side color RAL 9010 pure white * Side wall painting in a RAL color of your choice available at extra cost ----Information: * New vehicle without registration * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty Dujdspk D D Uepfx Addot * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Koşul: yeni, azami yük ağırlığı: 8.780 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 Masterline: ----Braking System: * EBS brake system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar (adjustable by 300 mm) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Toolbox made from galvanized sheet steel on the right side * Plastic quarter mudguards Dodepk D Dmjpfx Addsut ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * Bolt-on underrun protection with LED rear lights ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking bearings, plus 3 on the outside of the front panel * Hot-dip galvanized chassis * Fully galvanized steel three-way tipper body * Continuous side walls, foldable without central stanchion, equipped with drop-side spring assistors * Rear tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed and foldable lashing point in each corner, plus 4 x 3 t recessed and foldable lashing rings per side in the outer frame * 4 mm steel floor, ramp mounting rail at the rear for drive-on ramps ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,570 x 400 mm (load capacity 8 t per pair), suitable for vehicles with rubber tires or tracks * Lockable rear storage compartment recessed in the chassis beneath the loading area ----Tyres: * 235/75 R 17.5 tires ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf, near the A7

Koşul: ikinci el, Üretim yılı: 2013, Müller-Mitteltal CHK için çeşitli konteynerler: - 7 adet, 4,5–5 m³, adet fiyatı 1.000 € - 3 adet, 8 m³, adet fiyatı 2.000 € Djdpfx Aoxb N A Ieddjut Tüm konteynerler kullanıma uygun durumdadır. Üretim yılları 2013–2015. = Diğer Bilgiler = Üretim ülkesi: DE Detaylı bilgi için Jan-Marc Schwickert ile iletişime geçiniz.

Koşul: yeni, azami yük ağırlığı: 8.670 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Dodpsq Hg Dxefx Addsut ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Towing Eye: * Height-adjustable (300 mm) hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Galvanized sheet steel toolbox, right side-mounted * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing leg at the front * Rear: 2 mechanical, hot-dip galvanized folding supports ----Tipper Body: * Mesh hooks on sides and rear in the central locking mounts, plus 3 additional on the front wall * Hot-dip galvanized chassis * Steel pallet three-way tipper body * Continuous, drop-side panels without central stanchion, folding with drop-side assist spring * Rear tailgate can be folded down or swung with manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * Each corner with 1 x 5 t recessed and foldable lashing ring * Additionally, 4 x 3 t foldable lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, integrated into the chassis at the rear ----Tyres: * Tyres: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted in black * Side panels painted in RAL 9010 pure white * Painting of the side panels in an RAL color of your choice available at extra charge * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.600 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2025, * KA-TA-R 11.9 Masterline: ----Braking System: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire monitoring system * LED lighting * 15-pin plug connector ----General Attachments: * Toolbox made of galvanized sheet steel, mounted on the right side * Bolt-on underrun protection * Quarter mudguards made of plastic * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanized fold-down supports ----Tipper Body: * Net hooks on the sides and rear in the central locking mounts as well as 3 units on the front wall exterior * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, drop-down without central stanchion, with drop-side spring assist * Tailgate, drop-down and swinging with manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear guide rail for drive-on ramps ----Load Securing: * 1 x 5 t recessed, folding lashing ring in each corner * 4 x 3 t recessed and folding lashing rings in the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area, recessed into the chassis from the rear ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in black tone * Drop-side paintwork in RAL 9010 pure white * Paint finish for side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate in accordance with EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale Dodpsv Dz N Aofx Addsut ----Delivery Time: * Immediately available ex Egestorf

Koşul: yeni, azami yük ağırlığı: 8.870 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 6.270 mm, yükleme alanı genişliği: 2.470 mm, yükleme alanı yüksekliği: 400 mm, Üretim yılı: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Dujdpjq Ra D Eofx Addjt * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic quarter mudguards * Plastic toolbox at the front right outside on the front wall ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Area: * Loading area: 6.27 m * Suitable for container transport * 50 mm softwood flooring * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Drop-side panels made of trapezoidal-profiled sheet steel, foldable with sideboard spring assist * Rear wall slidably mounted between ramp brackets, when not in use stows inside in front of the bulkhead * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option for installation of 3 t foldable lashing rings every 600 mm * In each corner front and rear: 1 x 6.3 t lashing point * Various drillings in front and rear traverse for 1.2 t lashing option ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes, and drive-on ramps * Sides painted in RAL 9010 pure white * Painting of side panels available in any RAL color at extra cost ----Info: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery Time: Available from CW (calendar week)

Koşul: yeni, azami yük ağırlığı: 13.600 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, Üretim yılı: 2026, * RAK 18.0 external roller with rear tipping function ----Brake system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brakes are uncoupled) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axles * Enclosed side underrun protection * Rear bolted underrun protection * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable A-sign at rear * Rear bumper pads ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power plug * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for container lengths: * For containers from 6,500 mm to 7,000 mm ----Container deck / tipping bridge: * External roller guidance via flat bar stops with a clear width of approx. 2,180 mm, in combination with 3 lateral centering pieces per side for container guidance * To receive and stop the container rollers, two recessed roller bearings connected to the tipping frame are installed at the rear, with pneumatically actuated securing to prevent longitudinal movement * Positive locking of the roll containers achieved via a pneumatically operated transverse clamping system mounted at the front of the tipping frame and accessible externally (single-side operation) * Chassis frame internally fitted with a rearward-tipping main frame – single-tube motor-hydraulic tipping system * Tipping angle: 42° * Rubber pads between chassis and tipping frame * Containers are loaded/pushed from the front * Hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading height: * Unladen approx. 1,270 mm ----Paintwork: * Rear underrun protection and locking components (without top coat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transports according to DIN 30722 part 1 Dusdpfxsx Ipbmj Addjt * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale excepted * Sample pictures (photos may vary from actual vehicle due to special features) ----Delivery time: * Available from calendar week 24/2026

Koşul: yeni, azami yük ağırlığı: 8.850 kg, toplam ağırlık: 11.900 kg, dingil konfigürasyonu: 2 dingil, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, yükleme alanı yüksekliği: 500 mm, Üretim yılı: 2024, * KA-TA-R 11.9 "Masterline" ----Braking System: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flange towing eye ----General Accessories: * Jost mechanical support winch at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Plastic tool box, approx. 750 x 350 x 300 mm, mounted laterally on the right * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Body: * Mesh hooks on the side and rear at the central locking mounts, plus 2 on the front wall Duedpfx Ajl Thyxeddot * Three-way steel pallet tipper body (continuous side walls – no center stanchions – can be folded down with board wall spring lifter) * Rear stanchions bolted * Combo steel wing doors, rear, 2-leaf, asymmetrically split, can pivot and lock up to 270°, not foldable, plus with additional swinging frame for automatic rear flap opening during tipping; locking via galvanized turn bar lock and central locking system * Deactivation function for automatic rear flap operation when tipping in reverse with the wing door open * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Ramps: * 1 pair of aluminum drive-on ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment accessible from the rear, recessed under the loading area in the chassis ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra charge * Axles, springs, flange eye, air tanks, and support winch painted black ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle, unregistered, with manufacturer’s warranty * Subject to prior sale and errors ----Delivery Time: * Available immediately ex Egestorf on the A7